Photochemical Nitrogen Conversion to Ammonia in Ambient Conditions with FeMoS-Chalcogels

Photocatalytic Dinitrogen Reduction to Ammonia over Biomimetic FeMoSx Nanosheets

Reduction of atmospheric dinitrogen (N2) to ammonia (NH3) using water and sunlight in the absence of sacrificial reducing reagents at room temperature is very challenging and is considered an eco-friendly approach to meet the rapidly increasing demand for nitrogen storage, fertilizers, and a sustainable society. Currently, ammonia production via the energy-intensive Haber-Bosch process causes ∼350 million tons of carbon dioxide (CO2) emission per year. Interestingly, natural N2 fixation by the nitrogenase enzyme occurs under ambient conditions. Unfortunately, N2 fixation on biomimetic catalysts has rarely been studied. To mimic biological nitrogen fixation, herein, we synthesized the novel iron molybdenum sulfide (FeMoSx) micro-/nanosheets via a simple hydrothermal approach for the first time. Further, we successfully demonstrated the photochemical conversion of N2 to NH3 over a biomimetic FeMoSx photocatalyst. The estimated yield is around 99.79 ± 6.0 μmol/h/g photocatalyst with a quantum efficiency of ∼0.028% at 532 nm visible-light wavelength. Besides, we also systematically studied the influence of key factors to further improve NH3 yields. Overall, this study paves a new pathway to fabricate carbon-free, photochemical N2 fixation materials for future applications.

Light-driven ammonia synthesis under mild conditions using lithium hydride

Photon-driven chemical processes are usually mediated by oxides, nitrides and sulfides whose photo-conversion efficiency is limited by charge carrier recombination. Here we show that lithium hydride undergoes photolysis upon ultraviolet illumination to yield long-lived photon-generated electrons residing in hydrogen vacancies, known as F centres. We demonstrate that photon-driven dehydrogenation and dark rehydrogenation over lithium hydride can be fulfilled reversibly at room temperature, which is about 600 K lower than the corresponding thermal process. As light-driven F centre generation could provide an alternative approach to charge carrier separation to favour chemical transformations that are kinetically or thermodynamically challenging, we show that light-activated lithium hydride cleaves the N≡N triple bond to form a N-H bond under mild conditions. Co-feeding a N2/H2 mixture with low H2 partial pressure leads to photocatalytic ammonia formation at near ambient conditions. This work provides insights into the development of advanced materials and processes for light harvesting and conversion.

Tuning the Interfaces of ZnO/ZnCr2 O4 Derived from Layered-Double-Hydroxide Precursors to Advance Nitrogen Photofixation

Drawing inspiration from the enzyme nitrogenase in nature, researchers are increasingly delving into semiconductor photocatalytic nitrogen fixation due to its similar surface catalytic processes. Herein, we reported a facile and efficient approach to achieving the regulation of ZnO/ZnCr2 O4 photocatalysts with ZnCr-layered double hydroxide (ZnCr-LDH) as precursors. By optimizing the composition ratio of Zn/Cr in ZnCr-LDH to tune interfaces, we can achieve an enhanced nitrogen photofixation performance (an ammonia evolution rate of 31.7 μmol g-1  h-1 using pure water as a proton source) under ambient conditions. Further, photo-electrochemical measurements and transient surface photovoltage spectroscopy revealed that the enhanced photocatalytic activity can be ascribed to the effective carrier separation efficiency, originating from the abundant composite interfaces. This work further demonstrated a promising and viable strategy for the synthesis of nanocomposite photocatalysts for nitrogen photofixation and other challenging photocatalytic reactions.

Research Progress in Composite Materials for Photocatalytic Nitrogen Fixation

Ammonia is an essential component of modern chemical products and the building unit of natural life molecules. The Haber-Bosch (H-B) process is mainly used in the ammonia synthesis process in the industry. In this process, nitrogen and hydrogen react to produce ammonia with metal catalysts under high temperatures and pressure. However, the H-B process consumes a lot of energy and simultaneously emits greenhouse gases. In the "double carbon" effect, to promote the combination of photocatalytic technology and artificial nitrogen fixation, the development of green synthetic reactions has been widely discussed. Using an inexhaustible supply of sunlight as a power source, researchers have used photocatalysts to reduce nitrogen to ammonia, which is energy-dense and easy to store and transport. This process completes the conversion from light energy to chemical energy. At the same time, it achieves zero carbon emissions, reducing energy consumption and environmental pollution in industrial ammonia synthesis from the source. The application of photocatalytic technology in the nitrogen cycle has become one of the research hotspots in the new energy field. This article provides a classification of and an introduction to nitrogen-fixing photocatalysts reported in recent years and prospects the future development trends in this field.

Novel gC3N4/MgZnAl-MMO derived from LDH for solar-based photocatalytic ammonia production using atmospheric nitrogen

The development of catalysis technologies for sustainable environmental applications, especially an alternative to ammonia (NH3) production under the Haber-Bosch process, has gained a lot of scope in recent days. The current work demonstrated a green synthesis of graphitic carbon nitride (gC3N4) containing magnesium-zinc-aluminium mixed metal oxides (MgZnAl-MMO) derived from layered double hydroxide (LDH) for visible light aided catalytic production of ammonia. Pyrolysis-hydrothermal techniques were adopted for the synthesis and fabrication of the gC3N4/MgZnAl-MMO catalytic composite. Characterization results of field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), UV-visible spectroscopy, photoluminescence (PL), etc. showed the desired properties and functionalities like semi-crystalline structure with rough surface morphology that enhance the sorption reactions. Catalytic composite gC3N4/MgZnAl-MMO showed a bandgap energy of 2.16 eV that is considerably shifted toward the visible range when compared to gC3N4 (2.39 eV) and MgZnAl-MMO (2.93 eV). The results were also well complied with XPS results obtained that promote solar-based photocatalysis. The gC3N4/MgZnAl-MMO assisted photocatalytic production of NH3 in an aqueous media proved to be acceptable by the production of a maximum 47.56 μmol/L NH3 under visible spectrum employing a light emitting diode (LED) source. The results showed that the advancement of catalyst for desired functionalities and NH3 production using LED simulating solar light-aided catalysis would be an alternative to the Haber-Bosch process and solar-based sustainable processes for NH3 production.

Effects of Field Strength and Silver Nanowire Size on Plasmon-Enhanced N2 Dissociation

Dissociation of the nitrogen molecule via plasmon-enhanced catalysis using noble metal nanoparticles has been investigated both experimentally and computationally in recent years. However, the mechanism of plasmon-enhanced nitrogen dissociation is still not very clear. In this work, we apply theoretical approaches to examine the dissociation of a nitrogen molecule on atomically thin Ag_n nanowires (n = 6, 8, 10, 12) and a Ag₁₉⁺ nanorod. Ehrenfest dynamics provides information about the motion of nuclei during the dynamics process and real-time TDDFT calculations show the electronic transitions and population of electrons over the first 10 s of fs time scale. The activation and dissociation of nitrogen are typically enhanced when the electric field strength increases. However, the enhancement is not always monotonic with field strength. As the length of the Ag wire increases, nitrogen is typically easier to dissociate and thus requires lower field strengths, even though the plasmon frequency is lower. The Ag₁₉⁺ nanorod leads to faster dissociation of N₂ than the atomically thin nanowires. Overall, our detailed study yields insights into the mechanisms involved in plasmon-enhanced N₂ dissociation, as well as provides information about factors that can be used to improve adsorbate activation.

The important role of surface charge on a new mechanism of nitrogen reduction

The electrocatalytic nitrogen reduction reaction (NRR) is a green and sustainable approach for producing ammonia. Low-cost carbon-based materials are promising catalysts for the electrochemical NRR. Among them, Cu-N₄-graphene is a unique catalytic substrate. Its catalytic performance for the NRR has remained unclear as N₂ can only be physisorbed on such a substrate. In this work, we focus on the influence of an electronic environment on the electrocatalytic NRR. DFT computations reveal that the NN bond can be effectively activated at a surface charge density of -1.88 × 10¹⁴ e cm^-2 on Cu-N₄-graphene and further the NRR proceeds via an alternating hydrogenation pathway. This work offers a new insight into the mechanism of the electrocatalytic NRR and emphasizes the importance of environmental charges in the electrocatalytic process of the NRR.

Construction of Co3O4 nanopolyhedra with rich oxygen vacancies from ZIF-67 for efficient photocatalytic nitrogen fixation

Photocatalytic nitrogen fixation has attracted much attention due to the fact that it is a way of using solar energy to achieve clean and sustainable conversion of nitrogen to ammonia under mild conditions. In this paper, different proportions of Zn-doped Co₃O₄ nanopolyhedrons were synthesized using bimetallic ZIFs containing Co²⁺ and Zn²⁺ as precursors for the construction of photocatalytic nitrogen fixation semiconductor materials for the first time. The synthesized Co₃O₄ nano-polyhedron still retains the rhombic dodecahedron shape of ZIF-67 and exhibits a large specific surface area. Moreover, Zn doping results in abundant oxygen vacancies on the surface of Co₃O₄ polyhedron. These oxygen vacancies not only provide active sites for nitrogen adsorption and activation, but also enhance the separation ability of photocarriers, which can significantly improve the efficiency of photocatalytic nitrogen fixation of the material. When Zn-Co₃O₄-30 is utilized as the catalyst for photocatalytic nitrogen fixation, the nitrogen fixation rate is 96.8 μmol g^-1 h^-1, which is much higher than that of pure-Co₃O₄. In this study, heteroatom-doped Co₃O₄ polyhedron with rich oxygen vacancy was synthesized by low-temperature oxidation method, which provides a new idea for the design and synthesis of skeleton-based photocatalytic nitrogen fixation materials.

Catalysis of dinitrogen activation and reduction by a single Fe13 cluster and its doped systems

Catalyzing N₂ reduction to ammonia under ambient conditions is known to be significant both in the fertilizer industry and life sciences. To unveil the synergy of multiple sites, here, we have studied the catalysis of ammonia synthesis using a typical Fe₁₃ cluster and its doped systems, Fe₁₂X (X = V, Cr, Mn, Co, Ni, Cu, Zn, Nb, Mo, Ru, and Rh). The energetics analysis showed that center substitution (X@Fe₁₂) was favored while doping single V, Cr, Co, and Mo atoms, whereas Mn, Ni, Cu, Zn, Nb, Ru, and Rh tended to form shell-doped structures (Fe₁₂X). Among all the 13 clusters, Fe₁₂Nb exhibited the lowest activation energy for N₂ dissociation; moreover, in the hydrogenation process, Fe₁₂Nb could convert N₂ to ammonia efficiently. We have fully illustrated the reaction dynamics and structural chemistry essence of these diverse 13-atom systems and propose Fe₁₂Nb as an ideal candidate for catalytic ammonia synthesis.

In silico design of single transition metal atom anchored defective boron carbide monolayers as high-performance electrocatalysts for the nitrogen reduction reaction

Development of low-cost and high-efficiency single atom catalysts (SACs) is essential for catalyzing nitrogen reduction reactions (NRR) under ambient conditions. Current SACs suffer from low selectivity and poor activity, making it hard for them to meet the requirements of industrial applications. Here, we present a graphene-like BC₃ monolayer as a substrate for single metal atoms. The catalytic performance of 4d and 5d metal atoms anchored in a vacancy containing BC₃ monolayer for NRR is systematically investigated by first-principles calculations. We find that Re@V_B is outstanding among all candidates, exhibiting high catalytic activity and selectivity, with a low limiting potential of -0.28 V. A new descriptor involving the active site and its environment is proposed, which has a volcano relationship with several factors in the catalytic process, establishing a link between the intrinsic properties of the active site and the catalytic performance. This study opens a new route to designing efficient catalysts with BC₃ as a substrate.

Recent progress of photocatalysts based on tungsten and related metals for nitrogen reduction to ammonia

Photocatalytic nitrogen reduction reaction (NRR) to ammonia holds a great promise for substituting the traditional energy-intensive Haber–Bosch process, which entails sunlight as an inexhaustible resource and water as a hydrogen source under mild conditions. Remarkable progress has been achieved regarding the activation and solar conversion of N₂ to NH₃ with the rapid development of emerging photocatalysts, but it still suffers from low efficiency. A comprehensive review on photocatalysts covering tungsten and related metals as well as their broad ranges of alloys and compounds is lacking. This article aims to summarize recent advances in this regard, focusing on the strategies to enhance the photocatalytic performance of tungsten and related metal semiconductors for the NRR. The fundamentals of solar-to-NH₃ photocatalysis, reaction pathways, and NH₃ quantification methods are presented, and the concomitant challenges are also revealed. Finally, we cast insights into the future development of sustainable NH₃ production, and highlight some potential directions for further research in this vibrant field.

Synchrotron X-Ray-Driven Nitrogen Reduction on an AgCu Thin Film

Nitrogen (N₂ ) is an essential element for life, but kinetically stable N₂ in the atmosphere needs to be reduced to biologically available forms as a nutrient for organisms. Abiotic nitrogen fixation is critical to the origin of life on the early Earth, which is due to lightning or mineral-based reduction. Here, synchrotron X-ray-induced silver nitrate formation on a silver copper (AgCu) thin-film is reported. Time-resolved X-ray diffraction measurements show that under intense X-ray exposure, initially formed silver oxides (AgOx) are quickly converted to silver nitrate (AgNO₃ ). Interestingly, AgNO₃ is first formed in its high-temperature phase with a space group of R3cH, which gradually transforms to the room temperature phase with a space group of Pbca under continuous X-ray irradiation. The result not only provides a new clue about the abiotic nitrogen reduction prior to life but also demonstrates a novel strategy of materials synthesis using synchrotron X-rays.

Photocatalytic Dinitrogen Fixation with Water on High-Phosphorus-Doped Carbon Nitride with Surface Nitrogen Vacancies

Sunlight-driven photocatalytic dinitrogen (N₂) fixation with water at ambient conditions is of vital importance for a sustainable energy society. The efficiency of this reaction, however, is still low because of the difficulty in promoting both water oxidation and N₂ reduction reactions. Herein, we report that a high-phosphorus-doped carbon nitride with surface nitrogen vacancies (PCN(V)) synthesized by thermal condensation under a hydrogen (H₂) atmosphere using phosphorus oxide (P₂O₅) as a phosphorus source efficiently promotes N₂ fixation. The large numbers of the doped P atoms on the PCN(V)-P₂O₅ catalysts enhance the oxidation of water, while the N vacancies reduce N₂, facilitating efficient ammonia (NH₃) generation with an apparent quantum yield at 420 nm of 3.4%. Simulated sunlight illumination of the catalyst in water under N₂ bubbling produces NH₃ with a solar-to-chemical conversion efficiency of 0.16%, which is the highest efficiency among the previously reported powder photocatalysts.

Regulating Electronic Structure in Bi2 O3 Architectures by Ti Mediation: A Strategy for Dual Active Sites Synergistically Promoting Photocatalytic Nitrogen Hydrogenation

Under mild conditions, nitrogen undergoes the associative pathways to be reduced with solar energy as the driving force for fixation, avoiding the high energy consumption when undergoing dissociation. Nevertheless, this process is hindered by the high hydrogenation energy barrier. Herein, Ti was introduced as hard acid into the δ-Bi₂ O₃ (Ti-Bi₂ O₃ ) lattice to tune its local electronic structure and optimize its photo-electrochemistry performance (reduced bandgap, increased conduction band maximum, and extended carrier lifetime). Heterokaryotic Ti-Bi dual-active sites in Ti-Bi₂ O₃ created a novel adsorption geometry of O-N₂ interaction proved by density functional theory calculation and N₂ temperature-programmed desorption. The synergistic effect of dual-active sites reduced the energy barrier of hydrogenation from 2.65 (Bi₂ O₃ ) to 2.13 eV (Ti-Bi₂ O₃ ), thanks to the highly overlapping orbitals with N₂ . Results showed that 10 % Ti-doped Bi₂ O₃ exhibited an excellent ammonia production rate of 508.6 μmol g_cat ^-1  h^-1 in water and without sacrificial agent, which is 4.4 times higher than that of Bi₂ O₃ . In this work, bridging oxygen activation and synergistic hydrogenation for nitrogen with Ti-Bi dual active sites may unveil a corner of the hidden nitrogen reduction reaction mechanism and serves as a distinctive strategy for the design of nitrogen fixation photocatalysts.

Screening of transition metal single-atom catalysts supported by a WS2 monolayer for electrocatalytic nitrogen reduction reaction: insights from activity trend and descriptor

The electrocatalytic nitrogen reduction reaction (NRR), as an alternative green technology to the Haber-Bosch process, can efficiently synthesize ammonia under ambient conditions and has a reduced carbon footprint. Here we systematically investigate the NRR activity and selectivity of transition metal (TM) single-atom catalyst (SAC) anchored WS₂ monolayers (TM@WS₂) by means of first-principles calculations and microkinetic modeling. The construction of the reaction activity trend and the identification of an activity descriptor, namely *N₂H adsorption energy, facilitate the efficient screening and rational design of SACs with high activity. Manipulating the adsorption strength of the pivotal *N₂H intermediate is a potential strategy for enhancing NRR activity. Utilizing the limiting potential difference of NRR and the hydrogen evolution reaction (HER) as a selectivity descriptor, we screen three SACs with excellent activity and selectivity toward NRR, i.e., Re@WS₂, Os@WS₂ and Ir@WS₂ with favorable limiting potentials of -0.44 V, -0.38 V and -0.69 V. By using the explicit H₉O₄⁺ model, the kinetic barriers of the rate-determining steps (0.47 eV-1.15 eV) of the solvated proton transfer on the screened SACs are found to be moderate, indicative of a kinetically feasible process. Microkinetic modeling shows that the turnover frequencies of N₂ reduction to NH₃ on Re@WS₂, Os@WS₂ and Ir@WS₂ are 1.52 × 10⁵, 8.21 × 10² and 4.17 × 10^-4 per s per site at 400 K, achieving fast reaction rates. The coexistence of empty and occupied 5d orbitals of candidate SACs is beneficial for σ donation and π* backdonation, endowing them with extraordinary N₂ adsorption and activation. Moreover, the screened SACs possess good dispersity and thermodynamic stability. Our work provides a promising solution for the efficient screening and rational design of high-performance electrocatalysts toward the NRR.

Regulation of the Sulfur Environment in Clusters to Construct a Mn-Sn2S6 Framework for Mercury Bonding

The remarkable chemical activity of metal-sulfur clusters lies in their unique spatial configuration associated with the abundant unsaturated-coordination nature of sulfur sites. Yet, the manipulation of sulfur sites normally requires direct contact with other metal atoms, which inevitably changes the state of the coordinated sulfur. Herein, we facilely construct a Mn-Sn₂S₆ framework by regulating the sulfur environment of the [Sn₂S₆]^4- cluster with metal ions. Mn-Sn₂S₆ showed superior removal performance to gaseous elemental mercury (Hg⁰) at low temperatures (20-60 °C) and exhibited high resistance against SO₂. Moreover, Mn-Sn₂S₆ can completely remove liquid Hg²⁺ ions with low or high concentrations from acid wastewater. In addition, the adsorption capacities of Mn-Sn₂S₆ toward Hg⁰ and Hg²⁺ reached 21.05 and 413.3 mg/g, respectively. The results of physico-chemical characterizations revealed that compared with Cu²⁺, Co²⁺, and Fe²⁺, the moderate regulation of Mn²⁺ led to the special porous spherical structure of Mn-Sn₂S₆ with uniform element distribution, due to the difference of electrode potentials [E^θ(Mn²⁺/Mn) < E^θ(S/S^2-) < E^θ(Sn⁴⁺/Sn²⁺)]. The porous structure was beneficial to Hg⁰ and Hg²⁺ adsorption, and the presence of Mn⁴⁺/Mn³⁺ and S^1- promoted the oxidation of Hg⁰, resulting in stable HgS species. The constructed Mn-Sn₂S₆, thus, is a promising sorbent for both Hg⁰ ang Hg²⁺ removal and provides guidelines for cluster-based materials design and tuning.

Assembly of a coordination polymer with sulphate-capped pentamolybdate units and copper: Synthesis, Structure, Magnetic and Catalytic studies

A new coordination polymer based upon the sulphate-capped pentamolybdate unit has been synthesized from the reaction of {Mo3S7Br6}2- with copper(II) bromide and pyridine, in DMF. The as-synthesized compound, formulated as...

Light induced ammonia synthesis by crystalline polyoxometalate-based hybrid frameworks coupled with the Sv-1T MoS2 cocatalyst

A series of crystalline polyoxometalate-based hybrid frameworks coupled with rich sulfur vacancy 1T MoS2 through the hydrothermal growth strategy are presented towards light induced ammonia synthesis.

Emerging Materials and Methods toward Ammonia-Based Energy Storage and Conversion

Efficient storage and conversion of renewable energies is of critical importance to the sustainable growth of human society. With its distinguishing features of high hydrogen content, high energy density, facile storage/transportation, and zero-carbon emission, ammonia has been recently considered as a promising energy carrier for long-term and large-scale energy storage. Under this scenario, the synthesis, storage, and utilization of ammonia are key components for the implementation of ammonia-mediated energy system. Being different from fossil fuels, renewable energies normally have intermittent and variable nature, and thus pose demands on the improvement of existing technologies and simultaneously the development of alternative methods and materials for ammonia synthesis and storage. The energy release from ammonia in an efficient manner, on the other hand, is vital to achieve a sustainable energy supply and complete the nitrogen circle. Herein, recent advances in the thermal-, electro-, plasma-, and photocatalytic ammonia synthesis, ammonia storage or separation, ammonia thermal/electrochemical decomposition and conversion are summarized with the emphasis on the latest developments of new methods and materials (catalysts, electrodes, and sorbents) for these processes. The challenges and potential solutions are discussed.

Hierarchical CoS2/MoS2 flower-like heterostructured arrays derived from polyoxometalates for efficient electrocatalytic nitrogen reduction under ambient conditions

Electrochemical nitrogen reduction reaction (NRR) has been identified as a prospective alternative for sustainable ammonia production. Developing cost-effective and highly efficient electrocatalysts is critical for NRR under ambient conditions. Herein, the hierarchical cobalt-molybdenum bimetallic sulfide (CoS₂/MoS₂) flower-like heterostructure assembled from well-aligned nanosheets has been easily fabricated through a one-step strategy. The efficient synergy between different components and the formation of heterostructure in CoS₂/MoS₂ nanosheets with abundant active sites makes the non-noble metal catalyst CoS₂/MoS₂ highly effective in NRR, with a high NH₃ yield rate (38.61 μg h^-1 mg_cat.^-1), Faradaic efficiency (34.66%), high selectivity (no formation of hydrazine) and excellent long-term stability in 1.0 mol L^-1 K₂SO₄ electrolyte (pH = 3.5) at -0.25 V versus the reversible hydrogen electrode (vs. RHE) under ambient conditions, exceeding much recently reported cobalt- and molybdenum-based materials, even catch up with some noble-metal-based catalyst. Density functional theory (DFT) calculation indicates that the formation of N₂H* species on CoS₂(200)/MoS₂(002) is the rate-determining step via both the alternating and distal pathways with the maximum ΔG values (1.35 eV). These results open up opportunities for the development of efficient non-precious bimetal-based catalysts for NRR.

Synergistic Multisites Fe2Mo6S8 Electrocatalysts for Ambient Nitrogen Conversion to Ammonia

Electrochemical hydrogenation of N₂ under ambient conditions is attractive for sustainable and distributable NH₃ production but is limited by the lack of selective electrocatalysts. Herein, we describe active site motifs based on the Chevrel phase chalcogenide Fe₂Mo₆S₈ that exhibit intrinsic activities for converting N₂ to NH₃ in aqueous electrolytes. Despite having a very low specific surface area of ∼2 m²/g, this catalyst exhibited a Faradaic efficiency of 12.5% and an average rate of 70 μg h^-1 mg_cat^-1 for NH₃ production at -0.20 V vs RHE. Such activities were attributed to the unique composition and structure of Fe₂Mo₆S₈ that provide synergistic multisites for activating and associating key reaction intermediates. Specifically, Fe/Mo sites assist adsorption and activation of N₂, whereas S sites stabilize hydrogen intermediate H_ad* for N₂ hydrogenation. Fe in Fe₂Mo₆S₈ enhances binding of S with H_ad* and thus inhibits the competing hydrogen evolution reaction. The spatial geometry of Fe, Mo, and S sites in Fe₂Mo₆S₈ promotes conversion of N₂-H_ad* association intermediates, reaching a turnover frequency of ∼0.23 s^-1 for NH₃ production.

Revealing Ammonia Quantification Minefield in Photo/Electrocatalysis

Photo/electrocatalytic ammonia synthesis has recently developed fast while the ammonia yields over state-of-the-art photo/electrocatalysts are still very moderate. Such low concentration of synthesized NH3 brings about a challenge to the reliable quantification of the product in photo/electrocatalysis. Notably, we found that the quantitative detection of ammonia concentration below 0.2 ppm is error-prone, which is likely the case happening in the majority of photo/electrocatalytic NH3 synthesis, thus arising concerns about the rationality and accuracy for low-concentration ammonia quantification in these processes. Herein, we discuss the methodology used and analyze the reliability of various detection methods for the detection of trace ammonia in aqueous media. The challenges facing the detection of low concentration of ammonia in photo/electrocatalysis can be overcome by integration with multiple detection methods. According to the data presented, we also propose an effective criterion for precise quantification of ammonia, avoiding the unreasonable comparisons in photo/electrocatalytic ammonia synthesis.

Defect Regulating of Few-Layer Antimonene from Acid-Assisted Exfoliation for Enhanced Electrocatalytic Nitrogen Fixation

Nitrogen reduction reaction (NRR), as a green and sustainable technology, is far from a practical application due to the lack of efficient electrocatalysts. In this work, we found that antimonene, a group-VA elemental two-dimensional (2D) material, is attractive as an electrocatalyst for NRR. The antimonene here is acquired through chemical exfoliation of antimony (Sb) using H₂SO₄ for the first time, which simultaneously achieved efficient large-sized exfoliation and created a high density of active edge sites. Moreover, the concentration of defects shows a gradual increasing tendency as the treatment time extends. The obtained antimonene exhibited favorable average ammonia (NH₃) yield and Faradaic efficiency as high as 2.08 μg h^-1 cm^-2 and 14.25% at -0.7 V versus RHE, respectively. Density functional theory calculations prove that the sufficient exposure of edge defects is favorable for reducing the reaction barrier and strengthening the interaction between antimonene and the intermediates of NRR, thus increasing the selectivity and yield rate of NH₃. The chemical exfoliation of Sb reported here offers an alternative avenue to engineer the surface structures of group-VA elemental-based catalysts. Investigation of NRR using 2D antimonene can further provide deep insight into the mechanism and principle of NRR over group-VA elemental nanosheets.

Structure, reactivity, and spectroscopy of nitrogenase-related synthetic and biological clusters

The reduction of dinitrogen (N2) is essential for its incorporation into nucleic acids and amino acids, which are vital to life on earth. Nitrogenases convert atmospheric dinitrogen to two ammonia molecules (NH3) under ambient conditions. The catalytic active sites of these enzymes (known as FeM-cofactor clusters, where M = Mo, V, Fe) are the sites of N2 binding and activation and have been a source of great interest for chemists for decades. In this review, recent studies on nitrogenase-related synthetic molecular complexes and biological clusters are discussed, with a focus on their reactivity and spectroscopic characterization. The molecular models that are discussed span from simple mononuclear iron complexes to multinuclear iron complexes and heterometallic iron complexes. In addition, recent work on the extracted biological cofactors is discussed. An emphasis is placed on how these studies have contributed towards our understanding of the electronic structure and mechanism of nitrogenases.

Dinitrogen binding and activation at a molybdenum-iron-sulfur cluster

The Fe-S clusters of nitrogenases carry out the life-sustaining conversion of N₂ to NH₃. Although progress continues to be made in modelling the structural features of nitrogenase cofactors, no synthetic Fe-S cluster has been shown to form a well-defined coordination complex with N₂. Here we report that embedding an [MoFe₃S₄] cluster in a protective ligand environment enables N₂ binding at Fe. The bridging [MoFe₃S₄]₂(μ-η¹:η¹-N₂) complex thus prepared features a substantially weakened N-N bond despite the relatively high formal oxidation states of the metal centres. Substitution of one of the [MoFe₃S₄] cubanes with an electropositive Ti metalloradical induces additional charge transfer to the N₂ ligand with generation of Fe-N multiple-bond character. Structural and spectroscopic analyses demonstrate that N₂ activation is accompanied by shortened Fe-S distances and charge transfer from each Fe site, including those not directly bound to N₂. These findings indicate that covalent interactions within the cluster play a critical role in N₂ binding and activation.

An Experimentally Verified LC-MS Protocol toward an Economical, Reliable, and Quantitative Isotopic Analysis in Nitrogen Reduction Reactions

To substitute the energy-intensive Haber-Bosch process for the synthesis of ammonia, some labile techniques, such as photocatalysis, electrocatalysis, photoelectrocatalysis, and photothermocatalysis, have emerged and attracted intense research interest. However, the contamination of the reaction system is one of the major concerns on how to reliably and accurately evaluate the performance of these catalysts, which is why various control studies are involved. Isotopic labeling studies are one of the most reliable control strategies in nitrogen fixation experiments, to ensure that N₂ is exclusively the source of the generated ammonia. As a convenient, sensitive and accurate technique distinguished with a quantitative atomic mass resolution, liquid chromatography-mass spectrometry (LC-MS) has been extensively employed for the detection of ammonia in aqueous electrolyte systems. However, the previous work protocols for ¹⁵ N₂ isotopic analysis using LC-MS either involved hazardous procedures which could potentially damage the instrument, or lacked in their experimental verification using real samples. Herein, a safe, reproducible and economical protocol for the detection of ammonia using LC-MS is presented, exhibiting an exponentially steep progressive detectivity of ¹⁵ N abundance, well verified with a series of experimental results for nitrogen reduction reactions. This is expected to provide a prudent cost-effective and sustainable gateway into isotopic analysis.

Comprehensive insights into synthetic nitrogen fixation assisted by molecular catalysts under ambient or mild conditions

N2 is fixed as NH3 industrially by the Haber-Bosch process under harsh conditions, whereas biological nitrogen fixation is achieved under ambient conditions, which has prompted development of alternative methods to fix N2 catalyzed by transition metal molecular complexes. Since the early 21st century, catalytic conversion of N2 into NH3 under ambient conditions has been achieved by using molecular catalysts, and now H2O has been utilized as a proton source with turnover frequencies reaching the values found for biological nitrogen fixation. In this review, recent advances in the development of molecular catalysts for synthetic N2 fixation under ambient or mild conditions are summarized, and potential directions for future research are also discussed.

Hydroxyl-Boosted Nitrogen Reduction Reaction: The Essential Role of Surface Hydrogen in Functionalized MXenes

MXenes, an emerging family of two-dimensional (2D) metal carbides and nitrides, have been demonstrated to be effective nitrogen reduction reaction (NRR) catalysts. So far, most of the theoretical studies toward NRR are based on bare MXenes; however, the structural stabilities are questionable. In this work, we studied the NRR process on several synthesized MXenes (Ti₂C, V₂C, Cr₂C, Zr₂C, Nb₂C, Mo₂C, Hf₂C, and Ta₂C) with hydroxyl (OH) termination since the structures are preferred under NRR operating conditions as per Pourbaix stability diagrams. It is found that OH plays an essential role in tuning the NRR chemistry, as a new surface-hydroxylation mechanism. Different from the widely accepted NRR mechanism where only protons are involved in the reaction, hydrogen (H) atoms from surface hydroxyl could be captured by the intermediate and participate into the NRR, while the remaining H vacancy can subsequently be self-repaired by the protons under the applied potential. The cooperative effect of surface hydroxylation can effectively boost the NRR, while Mo₂C(OH)₂ stands out with the most favorable limiting potential of -0.62 V and highest selectivity. Moreover, new scaling relationships based on the H vacancy energy are established, elucidating the possibility for structure-activity tuning. This study not only elaborates the essential role of surface OH functionalization in evaluating NRR performance but also affords new insights into advance sustainable NH₃ production.

Enhanced Activity of Titanocene Complex for Electrocatalytic Nitrogen Reduction Reaction

Enhanced titanocene (Cp2TiCl2) based electrocatalytic system for nitrogen reduction was shown, comprising glassy carbon electrode, high level of the catechol redox mediator, optimized binary THF/MeOH solvent and unique design of the reactor having ammonia permeable membrane at the outlet, which allowed constant nitrogen flow through the working solution during entire electrolysis without risk of evaporation of the solvent. Catalytic activity was observed in the potential range of (−1.5)–(−2.3) V, reaching TON of 2.83%, corresponding to the production of 0.566 μmol NH3 (9.64 μg) in 24 h hydrolysis at −2.3 V using 0.02 mmol TiCp2Cl2 (5 mg).