Imido exchange in bis(imido) uranium(VI) complexes with aryl isocyanates

Uranium versus Thorium: A Case Study on a Base-Free Terminal Uranium Imido Metallocene

The structure of and bonding in two base-free terminal actinide imido metallocenes, [η5-1,2,4-(Me3C)3C5H2]2An═N(p-tolyl) (An = U (1), Th (1')) are compared and connected to their individual reactivity. While structurally rather similar, the U(IV) derivative 1 is slightly more sterically crowded. Furthermore, density functional theory (DFT) studies imply that the 5f orbital contribution to the bonding within the individual actinide imido An═N(p-tolyl) moieties is significantly larger for 1 than for 1', which makes the bonds between the [η5-1,2,4-(Me3C)3C5H2]2U2+ and [(p-tolyl)N]2- fragments more covalent. Therefore, steric and electronic factors impact the reactivity of these imido complexes. For example, complex 1 is inert toward internal alkynes, but it readily forms Lewis base adducts [η5-1,2,4-(Me3C)3C5H2]2U═N(p-tolyl)(L) (L = OPMe3 (6), dmap (9), PhCN (14), and 2,6-Me2PhNC (17)) with Me3PO, 4-dimethylaminopyridine (dmap), nitrile, PhCN, or isonitrile 2,6-Me2PhNC. It may also react as a nucleophile or undergo a [2 + 2] cycloaddition with CS2, isothiocyanates, thio-ketones, ketones, lactides, and acyl nitriles, forming the four- or five-membered metallaheteroacycles, terminal sulfido, or oxido complexes, and cyanide amidate complexes, respectively. In contrast, after the addition of aldehyde p-tolylCHO, the tetranuclear complex [η5-1,2,4-(Me3C)3C5H2]4[OCH(p-tolyl)CH(p-tolyl)O]2U4O4 (10) is isolated. However, while 1 is unreactive toward dicyclohexylcarbodiimide (DCC), an equilibrium exists in benzene solution between N,N'-diisopropylcarbodiimide (DIC), 1, and the four-membered metallaheterocycle [η5-1,2,4-(Me3C)3C5H2]2U[N(p-tolyl)C(═NiPr)N(iPr)] (12). Furthermore, 1 may also engage in single- and two-electron transfer processes. It is singly oxidized by Ph3CN3, CuI, Ph2S2, and Ph2Se2, yielding the uranium(V) imido complexes [η5-1,2,4-(Me3C)3C5H2]2U═N(p-tolyl)(X) (X = N3 (20), I (22), PhS (23), and PhSe (24)), or is doubly oxidized by organic azides (RN3) and 9-diazofluorene, forming the uranium(VI) bis-imido metallocenes [η5-1,2,4-(Me3C)3C5H2]2U═N(p-tolyl)(=NR) (R = p-tolyl (18), mesityl (19)) and [η5-1,2,4-(Me3C)3C5H2]2U=N(p-tolyl)[=NN=(9-C13H8)] (21), respectively.

Reactivity of a Lewis base-supported uranium terminal imido metallocene towards small molecules

The Lewis base-supported uranium terminal imido metallocene [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(dmap) (1) readily reacts with various small molecules such as internal alkynes, isothiocyanates, thioketones, amidates, organic nitriles and imines, chlorosilanes, copper iodide, diphenyl disulfide, organic azides and diazoalkane derivatives. For example, treatment of 1 with PhCCCCPh and PhNCS forms metallaheterocycles originating from a [2 + 2] cycloaddition to yield [η5-1-(p-tolyl)NC(Ph)CHCC(Ph)CH2Si(Me)2-2,4-(Me3Si)2C5H2][η5-1,2,4-(Me3Si)3C5H2]U (2) and [η5-1,2,4-(Me3Si)3C5H2]2U[N(p-tolyl)C(NPh)S](dmap) (3), respectively. The reaction of 1 with the thioketone Ph2CS forms the known uranium sulfido complex [η5-1,2,4-(Me3Si)3C5H2]2US(dmap) (4), which reacts with a second molecule of Ph2CS to give the disulfido compound [η5-1,2,4-(Me3Si)3C5H2]2U(S2CPh2) (5). The imido moiety also promotes deprotonation reactions as illustrated in the reactions with the amide PhCONH(p-tolyl), the nitrile PhCH2CN and the imine (p-tolyl)2CNH to form the bis-amidate [η5-1,2,4-(Me3Si)3C5H2]2U[OC(Ph)N(p-tolyl)]2 (7), and the iminato complexes [η5-1,2,4-(Me3Si)3C5H2]2U[N(p-tolyl)C(CH2Ph)NH](NCCHPh) (8) and [η5-1,2,4-(Me3Si)3C5H2]2U[NH(p-tolyl)][NC(p-tolyl)2] (9), respectively. Addition of PhSiH2Cl to 1 yields [η5-1,2,4-(Me3Si)3C5H2]2U(Cl)[N(p-tolyl)SiH2Ph] (10). In contrast, the uranium(V) imido complexes [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(I) (11) and [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(SPh) (12), may be isolated upon addition of CuI or Ph2S2 to 1, respectively. Uranium(VI) bis-imido metallocenes [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)(NR) (R = p-tolyl (13), mesityl (14)) and [η5-1,2,4-(Me3Si)3C5H2]2UN(p-tolyl)[NN(9-C13H8)] (15) are accessible from 1 on exposure to RN3 (R = p-tolyl, mesityl) and 9-diazofluorene, respectively. Complexes 2, 3, 5, and 7-15 were characterized by various spectroscopic techniques and, in addition, compounds 2, 3, 5, and 7-13 were structurally authenticated by single-crystal X-ray diffraction analyses.

Uranyl Analogue Complexes—Current Progress and Synthetic Challenges

Uranyl ions, {UO2}n+ (n = 1, 2), display trans, strongly covalent, and chemically robust U-O multiple bonds, where 6d, 5f, and 6p orbitals play important roles. The synthesis of isoelectronic analogues of uranyl has been of interest for quite some time, mainly with the purpose of unveiling covalence and 5f-orbital participation in bonding. Significant advances have occurred in the last two decades, initially marked by the synthesis of uranium(VI) bis(imido) complexes, the first analogues with a {RNUNR}2+ core, later followed by the synthesis of unique trans-{EUO}2+ (E = S, Se) complexes, and recently highlighted by the synthesis of the first complexes featuring a linear {NUN} moiety. This review covers the synthesis, structure, bonding, and reactivity of uranium complexes containing a linear {EUE}n+ core (n = 0, 1, 2), isoelectronic to uranyl ions, {OUO}n+ (n = 1, 2), incorporating σ- and π-donating ligands that can engage in uranium–ligand multiple bonding, where oxygen may be replaced by heavier chalcogenido, imido, nitride, and carbene ligands, or by a transition metal. It focuses on synthetic methods of well-defined molecular uranium species in the condensed phase but also references gas-phase and low-temperature-matrix experiments, as well as computational studies that may lead to valuable insights.

Experimental and Computational Study of a Tetraazamacrocycle Bis(aryloxide) Uranyl Complex and of the Analogues {E═U═NR}2+ (E = O and NR)

The reaction of [U(κ⁶-{(^t-Bu2ArO)₂Me₂-cyclam})I][I] (H₂{(^t-Bu2ArO)₂Me₂-cyclam} = 1,8-bis(2-hydroxy-3,5-di-tert-butyl)-4,11-dimethyl-1,4,8,11-tetraazacyclotetradecane) with 2 equiv of NaNO₂ in acetonitrile results in the isolation of the uranyl complex [UO₂{(^t-Bu2ArO)₂Me₂-cyclam}] (3) in 31% yield, which was fully characterized, including by single-crystal X-ray diffraction. Density functional theory (DFT) computations were performed to evaluate and compare the level of covalency within the U═E bonds in 3 and in the analogous trans-bis(imido) [U(κ⁴-{(^t-Bu2ArO)₂Me₂-cyclam})(NPh)₂] (1) and trans-oxido-imido [U(κ⁴-{(^t-Bu2ArO)₂Me₂-cyclam})(O)(NPh)] (2) complexes. Natural bond orbital (NBO) analysis allowed us to determine the mixing covalency parameter λ, showing that in 2, where both U-O_oxido and U-N_imido bonds are present, the U-N_imido bond registers more covalency with regard to 1, and the opposite is seen for U-O_oxido with respect to 3. However, the covalency driven by orbital overlap in the U-N_imido bond is slightly higher in 1 than in 2. The ¹⁵N-labeled complexes [U(κ⁴-{(^t-Bu2ArO)₂Me₂-cyclam})(¹⁵NPh)₂] (1-¹⁵N) and [U(κ⁴-{(^t-Bu2ArO)₂Me₂-cyclam})(O)(¹⁵NPh)] (2-¹⁵N) were prepared and analyzed by solution ¹⁵N NMR spectroscopy. The calculated and experimental ¹⁵N chemical shifts are in good agreement, displaying the same trend of δ_N (1-¹⁵N) > δ_N (2-¹⁵N) and reveal that the ¹⁵N chemical shift may serve as a probe for the covalency of the U═NR bond.

Two-Electron Reduction of a U(VI) Complex with Al(C5Me5)

The reduction of U(VI) to U(IV) is rare, especially in one step, and not observed electrochemically as a one-wave, two-electron couple. Here, we demonstrate that reduction of the uranium(VI) bis(imido) complex, (C₅Me₅)₂U[═N(4-OⁱPrC₆H₄)]₂, is readily accomplished with Al(C₅Me₅), forming the bridging uranium(IV)/aluminum(III) imido complex (C₅Me₅)₂U[μ₂-N(4-OⁱPrC₆H₄)]₂Al(C₅Me₅). The structure and bonding of the bridging imido complex is examined with electrochemical measurements in tandem with density functional theory calculations.

A Uranium(VI)-Oxo-Imido Dimer Complex Derived from a Sterically Demanding Triamidoamine

The reaction of [UO₂(μ-Cl)₄{K(18-crown-6)}₂] with [{N(CH₂CH₂NSiPrⁱ₃)₃}Li₃] gives [{UO(μ-NCH₂CH₂N[CH₂CH₂NSiPrⁱ₃]₂)}₂] (1), [{(LiCl)(KCl)(18-crown-6)}₂] (2), and [LiOSiPrⁱ₃] (3) in a 1:2:2 ratio. The formation of the oxo-imido 1 involves the cleavage of a N-Si bond and the activation of one of the usually robust U═O bonds of uranyl(VI), resulting in the formation of uranium(VI)-imido and siloxide linkages. Notably, the uranium oxidation state remains unchanged at +6 in the starting material and product. Structural characterization suggests the dominance of a core RN═U═O group, and the dimeric formulation of 1 is supported by bridging imido linkages in a highly asymmetric U₂N₂ ring. Density functional theory analyses find a σ > π orbital energy ordering for the U═N and U═O bonds in 1, which is uranyl-like in nature. Complexes 1-3 were characterized variously by single crystal X-ray diffraction, multinuclear NMR, IR, Raman, and optical spectroscopies; cyclic voltammetry; and density functional theory.

Divergent uranium- versus phosphorus-based reduction of Me3SiN3 with steric modification of phosphido ligands

We describe an example of a two-electron metal- and ligand-based reduction of Me₃SiN₃ using uranium(iv) complexes with varying steric properties. Reaction of (C₅Me₅)₂U(CH₃)[P(SiMe₃)(Ph)] with Me₃SiN₃ produces the imidophosphorane complex, (C₅Me₅)₂U(CH₃)[N Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> P(SiMe₃)₂(Ph)] through oxidation of phosphorus. However, a similar reaction with a more sterically encumbering phosphido ligand, (C₅Me₅)₂U(CH₃)[P(SiMe₃)(Mes)] forms the U(iv) complex, (C₅Me₅)₂U[κ²-(N,N)–N(SiMe₃)P(Mes)N(SiMe₃)]. In probing the mechanism of this reaction, a U(vi) bis(imido) complex, (C₅Me₅)₂U(NSiMe₃){N[P(SiMe₃)(Mes)]} was isolated. DFT calculations show an intramolecular reductive cycloaddition reaction leads to the formation of the U(iv) bis(amido)phosphane from the U(vi) bis(imido) complex. This is a rare example of the isolation of a reaction intermediate in f element chemistry.

We describe an example of a two-electron metal- and ligand-based reduction of Me₃SiN₃ using uranium(iv) complexes with varying steric properties. With uranium-based reduction, a U(vi) intermediate is isolated.

CO2 conversion to phenyl isocyanates by uranium(vi) bis(imido) complexes

Uranium(vi) trans-bis(imido) complexes [U(κ4-{(tBu2ArO)2Me2-cyclam})(NPh)(NPhR)] react with CO2 to eliminate phenyl isocyanates and afford uranium(vi) trans-[O[double bond, length as m-dash]U[double bond, length as m-dash]NR]2+ complexes, including [U(κ4-{(tBu2ArO)2Me2-cyclam})(NPh)(O)] that was crystallographically characterized. DFT studies indicate that the reaction proceeds by endergonic formation of a cycloaddition intermediate; the secondary reaction to form a dioxo uranyl complex is both thermodynamically and kinetically hindered.

Thorium- and uranium-azide reductions: a transient dithorium-nitride versus isolable diuranium-nitrides

Molecular uranium-nitrides are now well known, but there are no isolable molecular thorium-nitrides outside of cryogenic matrix isolation experiments. We report that treatment of [M(Tren^DMBS)(I)] (M = U, 1; Th, 2; Tren^DMBS = {N(CH₂CH₂NSiMe₂Bu ^t )₃}^3-) with NaN₃ or KN₃, respectively, affords very rare examples of actinide molecular square and triangle complexes [{M(Tren^DMBS)(μ-N₃)} _n ] (M = U, n = 4, 3; Th, n = 3, 4). Chemical reduction of 3 produces [{U(Tren^DMBS)}₂(μ-N)][K(THF)₆] (5) and [{U(Tren^DMBS)}₂(μ-N)] (6), whereas photolysis produces exclusively 6. Complexes 5 and 6 can be reversibly inter-converted by oxidation and reduction, respectively, showing that these UNU cores are robust with no evidence for any C-H bond activations being observed. In contrast, reductions of 4 in arene or ethereal solvents gives [{Th(Tren^DMBS)}₂(μ-NH)] (7) or [{Th(Tren^DMBS)}{Th(N[CH₂CH₂NSiMe₂Bu ^t ]₂CH₂CH₂NSi[μ-CH₂]MeBu ^t )}(μ-NH)][K(DME)₄] (8), respectively, providing evidence unprecedented outside of matrix isolation for a transient dithorium-nitride. This suggests that thorium-nitrides are intrinsically much more reactive than uranium-nitrides, since they consistently activate C-H bonds to form rare examples of Th-N(H)-Th linkages with alkyl by-products. The conversion here of a bridging thorium(iv)-nitride to imido-alkyl combination by 1,2-addition parallels the reactivity of transient terminal uranium(iv)-nitrides, but contrasts to terminal uranium(vi)-nitrides that produce alkyl-amides by 1,1-insertion, suggesting a systematic general pattern of C-H activation chemistry for metal(iv)- vs. metal(vi)-nitrides. Surprisingly, computational studies reveal a σ > π energy ordering for all these bridging nitride bonds, a phenomenon for actinides only observed before in terminal uranium nitrides and uranyl with very short U-N or U-O distances.

Rare-earth metal and actinide organoimide chemistry

Elaborate synthesis schemes pave the way to f-element and group 3 complexes with multiply bonded imido ligands displaying intriguing reactivity.

Uranium(III) redox chemistry assisted by a hemilabile bis(phenolate) cyclam ligand: uranium-nitrogen multiple bond formation comprising a trans-{RN═U(VI)═NR}(2+) complex

A new monoiodide U(III) complex anchored on a hexadentate dianionic 1,4,8,11-tetraazacyclotetradecane-based bis(phenolate) ligand, [U(κ(6)-{((tBu2)ArO)2Me2-cyclam})I] (1), was synthesized from the reaction of [UI3(THF)4] (THF = tetrahydrofuran) and the respective potassium salt K2((tBu2)ArO)2Me2-cyclam and structurally characterized. Reactivity of 1 toward one-, two-, and four-electron oxidants was studied to explore the reductive chemistry of this new U(III) complex. Complex 1 reacts with one-electron oxidizers, such as iodine and TlBPh4, to form the seven-coordinate cationic uranium(IV) complexes [U(κ(6)-{((tBu2)ArO)2Me2-cyclam})I][X] (X = I (2-I), BPh4 (2-BPh4)). The new uranium(III) complex reacts with inorganic azides to yield the pseudohalide uranium(IV) complex [U(κ(6)-{((tBu2)ArO)2Me2-cyclam})(N3)2] (4) and the nitride-bridged diuranium(IV/IV) complex [(κ(4)-{((tBu2)ArO)2Me2-cyclam})(N3)U(μ-N)U(κ(5)-{((tBu2)ArO)2Me2-cyclam})] (5). Two equivalents of [U(κ(6)-{((tBu2)ArO)2Me2-cyclam})I] (1) effect the four-electron reduction of 1 equiv of PhN═NPh to form the bis(imido) complex [U(κ(4)-{((tBu2)ArO)2Me2-cyclam})(NPh)2] (6) and the U(IV) species 2-I. Moreover, the hemilability of the hexadentate ancillary ligand ((tBu2)ArO)2Me2-cyclam(2-) allows to perform the reductive cleavage of azobenzene with an unprecedented formation of a trans-bis(imido) complex. The complexes were characterized by NMR spectroscopy, and all the new uranium complexes were structurally authenticated by single-crystal X-ray diffraction.

Synthesis, characterization, and reactivity of a uranium(VI) carbene imido oxo complex

We report the uranium(VI) carbene imido oxo complex [U(BIPM(TMS))(NMes)(O)(DMAP)2] (5, BIPM(TMS) = C(PPh2 NSiMe3)2; Mes = 2,4,6-Me3C6H2; DMAP = 4-(dimethylamino)pyridine) which exhibits the unprecedented arrangement of three formal multiply bonded ligands to one metal center where the coordinated heteroatoms derive from different element groups. This complex was prepared by incorporation of carbene, imido, and then oxo groups at the uranium center by salt elimination, protonolysis, and two-electron oxidation, respectively. The oxo and imido groups adopt axial positions in a T-shaped motif with respect to the carbene, which is consistent with an inverse trans-influence. Complex 5 reacts with tert-butylisocyanate at the imido rather than carbene group to afford the uranyl(VI) carbene complex [U(BIPM(TMS))(O)2(DMAP)2] (6).

Tetrahalide complexes of the [U(NR)2]2+ ion: synthesis, theory, and chlorine K-edge X-ray absorption spectroscopy

Synthetic routes to salts containing uranium bis-imido tetrahalide anions [U(NR)(2)X(4)](2-) (X = Cl(-), Br(-)) and non-coordinating NEt(4)(+) and PPh(4)(+) countercations are reported. In general, these compounds can be prepared from U(NR)(2)I(2)(THF)(x) (x = 2 and R = (t)Bu, Ph; x = 3 and R = Me) upon addition of excess halide. In addition to providing stable coordination complexes with Cl(-), the [U(NMe)(2)](2+) cation also reacts with Br(-) to form stable [NEt(4)](2)[U(NMe)(2)Br(4)] complexes. These materials were used as a platform to compare electronic structure and bonding in [U(NR)(2)](2+) with [UO(2)](2+). Specifically, Cl K-edge X-ray absorption spectroscopy (XAS) and both ground-state and time-dependent hybrid density functional theory (DFT and TDDFT) were used to probe U-Cl bonding interactions in [PPh(4)](2)[U(N(t)Bu)(2)Cl(4)] and [PPh(4)](2)[UO(2)Cl(4)]. The DFT and XAS results show the total amount of Cl 3p character mixed with the U 5f orbitals was roughly 7-10% per U-Cl bond for both compounds, which shows that moving from oxo to imido has little effect on orbital mixing between the U 5f and equatorial Cl 3p orbitals. The results are presented in the context of recent Cl K-edge XAS and DFT studies on other hexavalent uranium chloride systems with fewer oxo or imido ligands.

Uranium-ligand multiple bonding in uranyl analogues, [L═U═L]n+, and the inverse trans influence

The societal importance of uranium complexes containing the uranyl moiety [O═U═O](2+) continues to grow with the ongoing international nuclear enterprise and associated accumulating legacy waste. Further studies of the electronic structure of uranyl and its analogues are imperative for the development of crucial technologies, including lanthanide/actinide extractants and chemical and environmental remediation methodologies. Actinide oxo halides are a subset of the growing class of actinyl (uranyl) analogues. The understanding of their electronic structures links the detailed spectroscopic studies of uranyl, indicating the role of the pseudocore 6p orbitals in U-O bonding, to hypotheses about the 6p orbitals' role in the chemical bonding of uranyl analogues. These actinide oxo halides are a very small class of actinide compounds that present the inverse trans influence (ITI). This class of complexes was, until recently, limited to two crystallographically characterized compounds, namely, [UCl(5)O][PPh(4)] and [PaCl(5)O][NEt(4)](2). These complexes are important because they give a readily and clearly defined experimental observable: the difference between the M-X(trans) and M-X(cis) (here X = Cl) bond lengths in the solid state. This bond metric is a sensitive probe for the role of 6p, 6d, and 5f orbitals, as well as electrostatic interactions, in determining their electronic structure. This Viewpoint Article reviews the theoretical, experimental, and synthetic work on the ITI in actinide complexes and contextualizes it within broader studies on the electronic structure of uranyl and its analogues. Furthermore, our recent work on the ITI in high-valent uranium(V/VI) oxo and imido complexes is described as a whole. This work builds on the extant synthetic literature on the ITI and provides design parameters for the synthesis and characterization of high-valent uranium-ligand multiple bonds.

Titanium(IV) imido complexes of imine imidazol-2-imine ligands

Free imine imidazol-2-imine ligands with two different substitution patterns have been isolated for the first time and they were found to exist as an equilibrium mixture of geometric and mesomeric isomers. The relative ratios of these isomers are dependent on both the nature of the substituents and of the solvent. The synthesis of the titanium(IV) alkyl and arylimido complexes of these ligands was unexpectedly found to be very selective and was successfully achieved only with the lesser sterically-demanding 2,4,6-trimethylphenyl derivative IMesN^Imine 2a. The solid-state structure of the alkylimido complex further confirms the zwitterionic character of the ligand. The isolated titanium imido complexes were found to be active catalysts for the polymerisation of ethylene.

ROTATIONAL BARRIERS AND VIBRATIONAL SPECTRA OF PHENYL KETENE, AZIDE, AND ISOCYANATE

Our interest in conjugation effects in substituted phenyl compounds has turned our attention to the highly reactive compounds phenyl ketene, azide, and isocyanate, which due to their reactivity are of utmost importance in organic synthesis. We performed local density functional theory (DFT) calculations using a 6-311G** basis set to calculate the structures and potential functions of the internal rotation. Further for the minimum structures we computed the vibrational infrared and Raman spectra of the three molecules. In order to confirm that DFT works rather well in these systems we performed the geometry optimizations also using ab initio Moeller–Plesset perturbation theory of second order (MP2) in the same basis set. As expected there exist just two minimum structures for each of the molecules which both correspond to planar structures and are identical due to the symmetry of the phenyl ring. The transitions states (TS) of the internal rotations are the perpendicular ones. We expect conjugation to play no major role in these molecules since extensive conjugation effects would imply a large reduction of the aromatic character of the phenyl ring which in turn would greatly destabilize the systems. However, although the rotational barriers appear to be rather small in these systems conjugation must play at least some role in stabilizing the planar ground state. As detailed later, the relative heights of the rotational barriers can all be explained naturally. Experimental vibrational spectra could be obtained only for phenyl isocyanate and azide, but not for the ketene because of the high reactivity of this molecule. Since in the former cases the calculated spectra agree fairly well with the measured ones, we present those of the other molecule as theoretical prediction, which could be useful to detect spectroscopically in a reaction mixture residual reactant. On the basis of potential energy distribution (PED) calculations we present a complete assignment of the vibrational lines to symmetry coordinates, where, for example, ring breathing must show up with rather large intensities in the Raman spectra of the molecules.

Oxidative addition to U(V)-U(V) dimers: facile routes to uranium(VI) bis(imido) complexes

The ability of dimeric bis(imido) uranium(V) complexes with the general formula [U(N(t)Bu)(2)(Y)((t)Bu(2)bpy)](2) (Y = I (1), SPh (2); (t)Bu(2)bpy = 4,4'-di-tert-butyl-2,2'-bipyridyl) to behave as two-electron reducing agents was examined with I(2), AgX (X = Cl, Br), PhEEPh (E = S, Se, Te), and chalcogen (O, S, Se) atom transfer reagents. The addition of I(2) and AgX to 1 leads to the formation of uranium(VI) dihalide complexes with the general formula U(N(t)Bu)(2)(I)(X)((t)Bu(2)bpy) (X = I (3), Cl (4), Br (5)). Complexes 1 and 2 can also reduce PhEEPh to generate uranium(VI) complexes with the general formula U(N(t)Bu)(2)(X)(EPh)((t)Bu(2)bpy) (X = I, E = S (6), Se (8), Te (10); X = SPh, E = S (7), Se (12)). These unsymmetrical complexes appear to be in equilibrium with the uranium(VI) complexes U(N(t)Bu)(2)(X)(2)((t)Bu(2)bpy) and U(N(t)Bu)(2)(EPh)(2)((t)Bu(2)bpy) (E = Se (9), Te (11)) and suggest that both U-I and U-E bonds possess a labile nature in bis(imido) uranium(VI) complexes. Complex 1 also reacts as a two-electron reductant toward chalcogen atom transfer reagents such as 4-methylmorpholine N-oxide, S(8), and Se to produce dimeric bis(imido) uranium(VI) complexes with the general formula [U(N(t)Bu)(2)(I)((t)Bu(2)bpy)](2)(mu-E) (E = O (13), S (14), Se (15)) and [U(N(t)Bu)(2)(I)((t)Bu(2)bpy)](2)(mu-eta(2):eta(2)-E(4)) (E = S (16), Se (17)). Density functional theory studies performed on a model complex of 13 indicate the presence of multiple bonding in the bridging U-O bond.