Combined Experimental and Computational Studies on Carbon−Carbon Reductive Elimination from Bis(hydrocarbyl) Complexes of (PCP)Ir

Mechanistic study on the reductive elimination of (aryl)(fluoroaryl)palladium complexes: a key step in regiospecific dehydrogenative cross-coupling

Cross-dehydrogenative coupling (CDC) reactions have attracted attention as short-step synthetic methods for C-C bond formation. Recently, we have developed CDC reactions between naphthalene and fluorobenzene. Rather than exhibiting general regioselectivity, this reaction proceeds selectively at the β-position of naphthalene. In this study, investigation using model complexes as reaction intermediates revealed that the origin of the unique selectivity is the exclusive occurrence of reductive elimination at the β-position. Detailed studies on the reductive elimination showed that the steric hindrance of the naphthyl group and the electron-withdrawing properties of fluorobenzene determine the position at which the reductive elimination reaction proceeds. These results show that the selectivity of the C-H functionalisation of polycyclic aromatic hydrocarbons (PAHs) is determined not by the C-H cleavage step, but by the subsequent reductive elimination step. The regioselective CDC reaction was adaptable to various PAHs but was less selective for pyrene with extended π-conjugation. In fluorobenzene substrates, the F atoms at the two ortho positions of the C-H moiety are necessary for high selectivity. The substrate ranges are in good agreement with the proposed mechanism, in which the reductive elimination step determines the regioselectivity.

C-H Activation by Isolable Cationic Bis(phosphine) Cobalt(III) Metallacycles

Five- and six-coordinate cationic bis(phosphine) cobalt(III) metallacycle complexes were synthesized with the general structures, [(depe)Co(cycloneophyl)(L)(L')][BAr^F₄] (depe = 1,2-bis(diethylphosphino)ethane; cycloneophyl = [κ-C:C-(CH₂C(Me)₂)C₆H₄]; L/L' = pyridine, pivalonitrile, or the vacant site, BAr₄^F = B[(3,5-(CF₃)₂)C₆H₃]₄). Each of these compounds promoted facile directed C(sp²)-H activation with exclusive selectivity for ortho-alkylated products, consistent with the selectivity of reported cobalt-catalyzed arene-alkene-alkyne coupling reactions. The direct observation of C-H activation by cobalt(III) metallacycles provided experimental support for the intermediacy of these compounds in this class of catalytic C-H functionalization reaction. Deuterium labeling and kinetic studies provided insight into the nature of C-H bond cleavage and C-C bond reductive elimination from isolable cobalt(III) precursors.

C–Cl Oxidative Addition and C–C Reductive Elimination Reactions in the Context of the Rhodium-Promoted Direct Arylation

A cycle of stoichiometric elemental reactions defining the direct arylation promoted by a redox-pair Rh(I)–Rh(III) is reported. Starting from the rhodium(I)-aryl complex RhPh{κ³-P,O,P-[xant(PⁱPr₂)₂]} (xant(PⁱPr₂)₂ = 9,9-dimethyl-4,5-bis(diisopropylphosphino)xanthene), the reactions include C–Cl oxidative addition of organic chlorides, halide abstraction from the resulting six-coordinate rhodium(III) derivatives, C–C reductive coupling between the initial aryl ligand and the added organic group, oxidative addition of a C–H bond of a new arene, and deprotonation of the generated hydride-rhodium(III)-aryl species to form a new rhodium(I)-aryl derivative. In this context, the kinetics of the oxidative additions of 2-chloropyridine, chlorobenzene, benzyl chloride, and dichloromethane to RhPh{κ³-P,O,P-[xant(PⁱPr₂)₂]} and the C–C reductive eliminations of biphenyl and benzylbenzene from [RhPh₂{κ³-P,O,P-[xant(PⁱPr₂)₂]}]BF₄ and [RhPh(CH₂Ph){κ³-P,O,P-[xant(PⁱPr₂)₂]}]BF₄, respectively, have been studied. The oxidative additions generally involve the cis addition of the C–Cl bond of the organic chloride to the rhodium(I) complex, being kinetically controlled by the C–Cl bond dissociation energy; the weakest C–Cl bond is faster added. The C–C reductive elimination is kinetically governed by the dissociation energy of the formed bond. The C(sp³)–C(sp²) coupling to give benzylbenzene is faster than the C(sp²)–C(sp²) bond formation to afford biphenyl. In spite of that a most demanding orientation requirement is needed for the C(sp³)–C(sp²) coupling than for the C(sp²)–C(sp²) bond formation, the energetic effort for the pregeneration of the C(sp³)–C(sp²) bond is lower. As a result, the weakest C–C bond is formed faster.

Gyroscope like molecules consisting of trigonal or square planar osmium rotators within three-spoked dibridgehead diphosphine stators: syntheses, substitution reactions, structures, and dynamic properties

The OsL_y moieties of the title complexes undergo rapid rotation within the diphosphine cages when L is restricted to Cl, Br, CO, H, and Me.

Exclusive Csp(3)-Csp(3) vs Csp(2)-Csp(3) Reductive Elimination from Pt(IV) Governed by Ligand Constraints

Selective reductive elimination of ethane (Csp(3)-Csp(3) RE) was observed following bromide abstraction and subsequent thermolysis of a Pt(IV) complex bearing both Csp(3)- and Csp(2)-hybridized hydrocarbyl ligands. Through a comparative experimental and theoretical study with two other Pt(IV) complexes featuring greater conformational flexibility of the ligand scaffold, we show that the rigidity of a meridionally coordinating ligand raises the barrier for Csp(2)-Csp(3) RE, resulting in unprecedented reactivity.

Mechanistic studies on C–C reductive coupling of five-coordinate Rh(iii) complexes

C–C reductive coupling of rare five-coordinate rhodium(iii) complexes has been studied in detail.

Addition of C-C and C-H bonds by pincer-iridium complexes: a combined experimental and computational study

We report that pincer-ligated iridium complexes undergo oxidative addition of the strained C-C bond of biphenylene. The sterically crowded species ((tBu)PCP)Ir ((R)PCP = κ(3)-1,3-C6H3(CH2PR2)2) initially reacts with biphenylene to selectively add the C(1)-H bond, to give a relatively stable aryl hydride complex. Upon heating at 125 °C for 24 h, full conversion to the C-C addition product, ((tBu)PCP)Ir(2,2'-biphenyl), is observed. The much less crowded ((iPr)PCP)Ir undergoes relatively rapid C-C addition at room temperature. The large difference in the apparent barriers to C-C addition is notable in view of the fact that the addition products are not particularly crowded, since the planar biphenyl unit adopts an orientation perpendicular to the plane of the (R)PCP ligands. Based on DFT calculations the large difference in the barriers to C-C addition can be explained in terms of a "tilted" transition state. In the transition state the biphenylene cyclobutadiene core is calculated to be strongly tilted (ca. 50°-60°) relative to its orientation in the product in the plane perpendicular to that of the PCP ligand; this tilt results in very short, unfavorable, non-bonding contacts with the t-butyl groups in the case of the (tBu)PCP ligand. The conclusions of the biphenylene studies are applied to interpret computational results for cleavage of the unstrained C-C bond of biphenyl by ((R)PCP)Ir.

Exploring the mechanism of the hydroboration of alkenes by amine–boranes catalysed by [Rh(xantphos)]+

The [Rh(xantphos)]⁺ fragment acts as an effective catalyst for the hydroboration of the alkene TBE (tert-butyl ethene) using the amine–borane H₃B·NMe₃ at low (0.5 mol%) catalyst loadings to give the linear product.

Mechanism of hydrogenolysis of an iridium-methyl bond: evidence for a methane complex intermediate

Evidence for key σ-complex intermediates in the hydrogenolysis of the iridium-methyl bond of (PONOP)Ir(H)(Me)(+) (1) [PONOP = 2,6-bis(di-tert-butylphosphinito)pyridine] has been obtained. The initially formed η(2)-H(2) complex, 2, was directly observed upon treatment of 1 with H(2), and evidence for reversible formation of a σ-methane complex, 5, was obtained through deuterium scrambling from η(2)-D(2) in 2-d(2) into the methyl group of 2 prior to methane loss. This sequence of reactions was modeled by density functional theory calculations. The transition state for formation of 5 from 2 showed significant shortening of the Ir-H bond for the hydrogen being transferred; no true Ir(V) trihydride intermediate could be located. Barriers to methane loss from 2 were compared to those of 1 and the six-coordinate species (PONOP)Ir(H)(Me)(CO)(+) and (PONOP)Ir(H)(Me)(Cl).

On the Role of Disproportionation Energy in Kumada Catalyst-Transfer Polycondensation

Kumada catalyst-transfer polycondensation (KCTP) is an effective method for the controlled polymerization of conjugated polymers. Nevertheless, side reactions leading to early termination and unwanted chain coupling cause deviations from the target molecular weight, along with increasing polydispersity and end group variation. The departure from the KCTP cycle stems from a disproportionation reaction that leads to experimentally observed side products. The disproportionation energies for a series of nickel-based initiators containing bidentate phosphino attendant ligands were computed using density functional theory at the B3LYP/DZP level. The initiator was found to be less favorable toward disproportionation by 0.5 kcal mol^-1 when ligated by 1,3-bis(diphenylphosphino)propane (dppp) rather than 1,2-bis(diphenylphosphino)ethane (dppe). Trends in disproportionation energy (E_disp) with a variety of bidentate phosphine ligands match experimental observations of decreased polymerization control. Theoretical E_disp values can thus be used to predict the likelihood of disproportionation in cross-coupling reactions and, therefore, aid in catalyst design.