Pressure and temperature jump relaxation kinetics of the conformational change in Salmonella typhimurium tryptophan synthase L-serine complex: large activation compressibility and heat capacity changes demonstrate the contribution of solvation

Combining temperature perturbations with X-ray crystallography to study dynamic macromolecules: A thorough discussion of experimental methods

Temperature is an important state variable that governs the behavior of microscopic systems, yet crystallographers rarely exploit temperature changes to study the structure and dynamics of biological macromolecules. In fact, approximately 90% of crystal structures in the Protein Data Bank were determined under cryogenic conditions, because sample cryocooling makes crystals robust to X-ray radiation damage and facilitates data collection. On the other hand, cryocooling can introduce artifacts into macromolecular structures, and can suppress conformational dynamics that are critical for function. Fortunately, recent advances in X-ray detector technology, X-ray sources, and computational data processing algorithms make non-cryogenic X-ray crystallography easier and more broadly applicable than ever before. Without the reliance on cryocooling, high-resolution crystallography can be combined with various temperature perturbations to gain deep insight into the conformational landscapes of macromolecules. This Chapter reviews the historical reasons for the prevalence of cryocooling in macromolecular crystallography, and discusses its potential drawbacks. Next, the Chapter summarizes technological developments and methodologies that facilitate non-cryogenic crystallography experiments. Finally, the chapter discusses the theoretical underpinnings and practical aspects of multi-temperature and temperature-jump crystallography experiments, which are powerful tools for understanding the relationship between the structure, dynamics, and function of proteins and other biological macromolecules.

Characterization of aminoacrylate intermediates of pyridoxal-5'-phosphate dependent enzymes

Pyridoxal-5'-phosphate (PLP) Schiff's bases of 2-aminoacrylate are intermediates in β-elimination and β-substitution reaction of PLP-dependent enzymes. These enzymes are found in two major families, the α-, or aminotransferase, superfamily, and the β-family. While the α-family enzymes primarily catalyze β-eliminations, the β-family enzymes catalyze both β-elimination and β-substitution reactions. Tyrosine phenol-lyase (TPL), which catalyzes the reversible elimination of phenol from l-tyrosine, is an example of an α-family enzyme. Tryptophan synthase catalyzes the irreversible formation of l-tryptophan from l-serine and indole, and is an example of a β-family enzyme. The identification and characterization of aminoacrylate intermediates in the reactions of both of these enzymes is discussed. The use of UV-visible absorption and fluorescence spectroscopy, X-ray and neutron crystallography, and NMR spectroscopy to identify aminoacrylate intermediates in these and other PLP enzymes is presented.

Allosteric regulation of substrate channeling: Salmonella typhimurium tryptophan synthase

The regulation of the synthesis of L-tryptophan (L-Trp) in enteric bacteria begins at the level of gene expression where the cellular concentration of L-Trp tightly controls expression of the five enzymes of the Trp operon responsible for the synthesis of L-Trp. Two of these enzymes, trpA and trpB, form an αββα bienzyme complex, designated as tryptophan synthase (TS). TS carries out the last two enzymatic processes comprising the synthesis of L-Trp. The TS α-subunits catalyze the cleavage of 3-indole D-glyceraldehyde 3′-phosphate to indole and D-glyceraldehyde 3-phosphate; the pyridoxal phosphate-requiring β-subunits catalyze a nine-step reaction sequence to replace the L-Ser hydroxyl by indole giving L-Trp and a water molecule. Within αβ dimeric units of the αββα bienzyme complex, the common intermediate indole is channeled from the α site to the β site via an interconnecting 25 Å-long tunnel. The TS system provides an unusual example of allosteric control wherein the structures of the nine different covalent intermediates along the β-reaction catalytic path and substrate binding to the α-site provide the allosteric triggers for switching the αββα system between the open (T) and closed (R) allosteric states. This triggering provides a linkage that couples the allosteric conformational coordinate to the covalent chemical reaction coordinates at the α- and β-sites. This coupling drives the α- and β-sites between T and R conformations to achieve regulation of substrate binding and/or product release, modulation of the α- and β-site catalytic activities, prevention of indole escape from the confines of the active sites and the interconnecting tunnel, and synchronization of the α- and β-site catalytic activities. Here we review recent advances in the understanding of the relationships between structure, function, and allosteric regulation of the complex found in Salmonella typhimurium.

Temperature-Jump 2D IR Spectroscopy with Intensity-Modulated CW Optical Heating

Pulsed temperature-jump (T-jump) spectroscopy with infrared (IR) detection has been widely used to study biophysical processes occurring from nanoseconds to ∼1 ms with structural sensitivity. However, many systems exhibit structural dynamics on time scales longer than the millisecond barrier that is set by the time scale for thermal relaxation of the sample. We developed a linear and nonlinear infrared spectrometer coupled to an intensity-modulated continuous wave (CW) laser to probe T-jump-initiated chemical reactions from <1 ms to seconds. Time-dependent modulation of the CW laser leads to a <1 ms heating time as well as a constant final temperature (±3%) for the duration of the heating time. Temperature changes of up to 75 °C in D₂O are demonstrated, allowing for nonequilibrium measurements inaccessible to standard pulsed optical T-jump setups. T-jump linear absorption, pump-probe, and two-dimensional IR (2D IR) spectroscopy are applied to the unfolding and refolding of ubiquitin and a model intercalated motif (i-motif) DNA sequence, and analysis of the observed signals is used to demonstrate the limits and utility of each method. Overall, the ability to probe temperature-induced chemical processes from <1 ms to many seconds with 2D IR spectroscopy provides multiple new avenues for time-dependent spectroscopy in chemistry and biophysics.

A novel dual mode X-band EPR resonator for rapid in situ microwave heating

A unique dual mode X-band Continuous Wave (CW) EPR resonator designed for simultaneous EPR measurement and rapid microwave (MW) induced sample heating is described. Chemical reactions subjected to a flow of energy and matter can be perturbed away from the thermodynamic equilibrium by imposing a rapid shock or physical change to the system. Depending on the magnitude of the perturbation, these changes can dictate the subsequent evolution of the entire system, allowing for instance to populate non-equilibrium reactive intermediate states. Temperature jump (T-jump) experiments are a common method to achieve such perturbations. Most T-jump experiments are based on Joule Heating methods or IR lasers. Here we demonstrate the principle of rapid sample heating based on microwaves. The benefits of MW heating include (i) rapid and efficient heating (i.e. using a tuned resonant cavity, >99% efficient power transfer to the sample can be achieved), and (ii) volumetric heating (i.e. the entire sample volume rises in temperature at once, since heat is generated in the sample instead of being transferred to it). Accordingly, the key concept of the design is the use of a cavity resonator allowing EPR detection (at 9.5 GHz) and simultaneous sample heating (at 6.1 GHz). Temperature increments of 50 °C within a few seconds are possible. This is evidenced and illustrated here by probing the temperature-induced variation of the rotational dynamics of 16-doxyl stearic acid methyl ester (16-DSE) spin probe grafted on the surface of sodium dodecyl sulphate (SDS) micelles in water, as well as copper (II) acetylacetonate in chloroform. Rapid changes in the rotational dynamics of the paramagnetic centres provide direct evidence for the in situ and simultaneous EPR measurement-heating capabilities of the resonator. Improvements afforded by the use of pulsed MW sources will enable faster heating time scales to be achieved. In the longer term, this current study demonstrates the simple and direct possibilities for using MW heating as a means of performing T-jump experiments.

Droplet-based optofluidic systems for measuring enzyme kinetics

The study of enzyme kinetics is of high significance in understanding metabolic networks in living cells and using enzymes in industrial applications. To gain insight into the catalytic mechanisms of enzymes, it is necessary to screen an enormous number of reaction conditions, a process that is typically laborious, time-consuming, and costly when using conventional measurement techniques. In recent times, droplet-based microfluidic systems have proved themselves to be of great utility in large-scale biological experimentation, since they consume a minimal sample, operate at high analytical throughput, are characterized by efficient mass and heat transfer, and offer high levels of integration and automation. The primary goal of this review is the introduction of novel microfluidic tools and detection methods for use in high-throughput and sensitive analysis of enzyme kinetics. The first part of this review focuses on introducing basic concepts of enzyme kinetics and describing most common microfluidic approaches, with a particular focus on segmented flow. Herein, the key advantages include accurate control over the flow behavior, efficient mass and heat transfer, multiplexing, and high-level integration with detection modalities. The second part describes the current state-of-the-art platforms for high-throughput and sensitive analysis of enzyme kinetics. In addition to our categorization of recent advances in measuring enzyme kinetics, we have endeavored to critically assess the limitations of each of these detection approaches and propose strategies to improve measurements in droplet-based microfluidics. Graphical abstract.

Picosecond-resolved fluorescent probes at functionally distinct tryptophans within a thermophilic alcohol dehydrogenase: relationship of temperature-dependent changes in fluorescence to catalysis

Two single-tryptophan variants were generated in a thermophilic alcohol dehydrogenase with the goal of correlating temperature-dependent changes in local fluorescence with the previously demonstrated catalytic break at ca. 30 °C (Kohen et al., Nature 1999, 399, 496). One tryptophan variant, W87in, resides at the active site within van der Waals contact of bound alcohol substrate; the other variant, W167in, is a remote-site surface reporter located >25 Å from the active site. Picosecond-resolved fluorescence measurements were used to analyze fluorescence lifetimes, time-dependent Stokes shifts, and the extent of collisional quenching at Trp87 and Trp167 as a function of temperature. A subnanosecond fluorescence decay rate constant has been detected for W87in that is ascribed to the proximity of the active site Zn(2+) and shows a break in behavior at 30 °C. For the remainder of the reported lifetime measurements, there is no detectable break between 10 and 50 °C, in contrast with previously reported hydrogen/deuterium exchange experiments that revealed a temperature-dependent break analogous to catalysis (Liang et al., Proc. Natl. Acad. Sci. U.S.A. 2004, 101, 9556). We conclude that the motions that lead to the rigidification of ht-ADH below 30 °C are likely to be dominated by global processes slower than the picosecond to nanosecond motions measured herein. In the case of collisional quenching of fluorescence by acrylamide, W87in and W167in behave in a similar manner that resembles free tryptophan in water. Stokes shift measurements, by contrast, show distinctive behaviors in which the active-site tryptophan relaxation is highly temperature-dependent, whereas the solvent-exposed tryptophan's dynamics are temperature-independent. These data are concluded to reflect a significantly constrained environment surrounding the active site Trp87 that both increases the magnitude of the Stokes shift and its temperature-dependence. The results are discussed in the context of spatially distinct differences in enthalpic barriers for protein conformational sampling that may be related to catalysis.

Identification of two-step chemical mechanisms and determination of thermokinetic parameters using frequency responses to small temperature oscillations

Increased focus on kinetic signatures in biology, coupled with the lack of simple tools for chemical dynamics characterization, lead us to develop an efficient method for mechanism identification. A small thermal modulation is used to reveal chemical dynamics, which makes the technique compatible with in cellulo imaging. Then, the detection of concentration oscillations in an appropriate frequency range followed by a judicious analytical treatment of the data is sufficient to determine the number of chemical characteristic times, the reaction mechanism, and the full set of associated rate constants and enthalpies of reaction. To illustrate the scope of the method, dimeric protein folding is chosen as a biologically relevant example of nonlinear mechanism with one or two characteristic times.

Long-range interactions in the α subunit of tryptophan synthase help to coordinate ligand binding, catalysis, and substrate channeling

The α-subunit of tryptophan synthase (αTS) catalyzes the conversion of indole-3-glycerol phosphate to d-glyceraldehyde-3-phosphate and indole. We propose that allosteric networks intrinsic to αTS are modulated by the binding of the β-subunit to regulate αTS function. Understanding these long-range amino acid networks in αTS thus gives insight into the coordination of the two active sites within TS. In this study, we have used Ala residues as probes for structural and dynamic changes of αTS throughout its catalytic cycle, in the absence of the β-subunit. Projection analysis of the chemical shift changes by site-specific amino acid substitutions and ligand titrations indicates that αTS has three important conformational states: ligand-free, glyceraldehyde-3-phosphate-bound(like), and the active states. The amino acid networks within these conformations are different, as suggested by chemical shift correlation analysis. In particular, there are long-range connections, only in the active state, between Ala47, which reports on structural and dynamic changes associated with the general acid/base Glu49, and residues within the β2α2 loop, which contains the catalytically important Asp60 residue. These long-range interactions are likely important for coordinating chemical catalysis. In the free state, but not in the active state, there are connections between the β2α2 and β6α6 loops that likely help to coordinate substrate binding. Changes in the allosteric networks are also accompanied by protein dynamic changes. During catalytic turnover, the protein becomes more rigid on the millisecond timescale and the active-site dynamics are driven to a faster nanosecond timescale.

Effects of hydrostatic pressure on the conformational equilibrium of tryptophan synthase from Salmonella typhimurium

A wide range of parameters influence allosteric communications between the alpha- and beta-subunits of the Trp synthase alpha(2)beta(2) multienzyme complex with L-Ser, including monovalent cations, pH, temperature, ligands, organic solvents, and hydrostatic pressure. The conformational change from closed to open can be monitored either by absorbance at 423 nm or fluorescence at 495 nm from the pyridoxal-5'-phosphate-L-Ser complex. Pressure perturbation was used to quantify the effects of monovalent cations, ligands, and mutations on the conformational equilibrium of Trp synthase. P-jump kinetics in the presence of Na(+), NH(4) (+), and Na(+) together with benzimidazole were also examined. The plots of lnk versus P are nonlinear and require a compressibility (beta(double dagger) (o)) term to obtain a good fit. beta(double dagger) (o) is positive for the Na(+) enzyme but negative for NH(4) (+) and Na(+) with benzimidazole. These results suggest that there is a large contribution of solvation to the kinetics of the conformational change of Trp synthase. The relaxation kinetics are also different if the P-jumps are made by increasing or decreasing pressure, suggesting that the enzyme conformations are ensembles of microstates.

Tryptophan synthase: a mine for enzymologists

Tryptophan synthase is a pyridoxal 5'-phosphate-dependent alpha(2)beta(2) complex catalyzing the last two steps of tryptophan biosynthesis in bacteria, plants and fungi. Structural, dynamic and functional studies, carried out over more than 40 years, have unveiled that: (1) alpha- and beta-active sites are separated by about 20 A and communicate via the selective stabilization of distinct conformational states, triggered by the chemical nature of individual catalytic intermediates and by allosteric ligands; (2) indole, formed at alpha-active site, is intramolecularly channeled to the beta-active site; and (3) naturally occurring as well as genetically generated mutants have allowed to pinpoint functional and regulatory roles for several individual amino acids. These key features have made tryptophan synthase a text-book case for the understanding of the interplay between chemistry and conformational energy landscapes.

Asymmetric kinetics of protein structural changes

Thermodynamic and kinetic understanding of structural transformations in proteins is critical to new developments in medicine and biotechnology. These fields often require the design of mechanism-based modulators of protein function. Researchers increasingly consider these structural changes-such as folding/unfolding or shuttling between active and inactive states-within the energy landscape concept that supposes a high-dimensional, rugged conformational surface. The unevenness, or asperity, of this conformational surface results from energetic barriers and kinetic traps. However, for a large number of protein reactions, such as reversible folding/unfolding, the literature only reports simple two-state transitions, which calls into question the use of a more complex energy landscape model. The question is: are these reactions really that simple, or are we misled by a biased experimental approach? In this Account, we argue in favor of the latter possibility. Indeed, the frequently employed temperature-jump method only allows recording protein structure changes in the heating direction. Under those conditions, it might not be possible to detect other kinetic pathways that could have been taken in the cooling direction. Recently, however, we have developed bidirectional pressure- and temperature-jump methods, which can offer new insights. Here, we show the potential of these methods both for studying protein folding/unfolding reactions, taking ribonuclease A as model, and for studying functionally relevant protein conformational changes, using the open/closed allosteric transition of tryptophan synthase. For example, the heating and cooling temperature-jump induced kinetics involved in the folding/unfolding conformational surface of ribonuclease A is illustrated above. In both of our model systems, the kinetic transition states of several reaction steps were path-dependent, i.e. the rates and thermodynamic activation parameters depend on the direction of the applied pressure and temperature perturbation. This asymmetry suggests that proteins cope with external stress by adapting their structure to form different ensembles of conformational substates. These states are distinguished by their activation enthalpy and entropy barriers, which can be strongly negative in the folding direction. Based on our analysis of activation compressibility and heat capacity, hydration and packing defects of the kinetic transition states are also very important for determining the reaction path. We expect that a more generalized use of this experimental approach should allow researchers to obtain greater insight into the mechanisms of physiologically relevant protein structural changes.