Synthesis of fluorine-18 functionalized nanoparticles for use as in vivo molecular imaging agents

[18F]-Radiolabelled Nanoplatforms: A Critical Review of Their Intrinsic Characteristics, Radiolabelling Methods, and Purification Techniques

A wide range of nano-objects is found in many applications of our everyday life. Recognition of their peculiar properties and ease of functionalization has prompted their engineering into multifunctional platforms that are supposed to afford efficient tools for the development of biomedical applications. However, bridging the gap between bench to bedside cannot be expected without a good knowledge of their behaviour in vivo, which can be obtained through non-invasive imaging techniques, such as positron emission tomography (PET). Their radiolabelling with [18F]-fluorine, a technique already well established and widely used routinely for PET imaging, with [18F]-FDG for example, and in preclinical investigation using [18F]-radiolabelled biological macromolecules, has, therefore, been developed. In this context, this review highlights the various nano-objects studied so far, the reasons behind their radiolabelling, and main in vitro and/or in vivo results obtained thereof. Then, the methods developed to introduce the radioelement are presented. Detailed indications on the chemical steps involved are provided, and the stability of the radiolabelling is discussed. Emphasis is then made on the techniques used to purify and analyse the radiolabelled nano-objects, a point that is rarely discussed despite its technical relevance and importance for accurate imaging. The pros and cons of the different methods developed are finally discussed from which future work can develop.

Bioactive polyethylene synthesized by ring opening metathesis polymerization for potential orthopaedic applications

Bioactive polyethylene incorporating hydrophobic PE-bearing macromonomers and hydrophilic PEGylated-peptide macromonomers was synthesized via ROMP. 3D-printed sheets of it with UHMWPE showed enhanced osteogenic activity for potential orthopaedic applications.

Effect of Radical Copolymerization of the (Oxa)norbornene End-group of RAFT-prepared Macromonomers on Bottlebrush Copolymer Synthesis via ROMP

Bottlebrush polymers are attractive for use in a variety of different applications. Here we report synthesis of two novel trithiocarbonate RAFT agents bearing either a oxanorbornyl or norbornenyl moiety for...

One-Pot Heterotelechelic Metathesis Polymers via Regioselective Chain Transfer Agents

Single chain transfer agents are used to synthesize narrowly distributed heterotelechelic ROMP polymers in one pot, exploiting a new mechanistic and synthetic approach. The chain transfer agents carrying different functional groups are synthesized in a few straightforward steps. Prefunctionalization of commercially available Grubbs' third-generation catalyst is realized in situ using regioselective chain transfer agents within a short reaction period. After monomer consumption, the excess chain transfer agent in the reaction medium automatically end-functionalizes the polymer chain, yielding a heterotelechelic polymer via a ring-opening-ring-closing sequence. ¹H NMR, MALDI-ToF, and SEC analyses confirmed end-group functionalization as well as excellent control over molecular weight and dispersity. This strategy highlights a new way of synthesizing one-pot heterotelechelic ROMP polymers straightforwardly and efficiently.

Himic Anhydride: A Retro Diels-Alder Reaction for the Organic Laboratory and an Accompanying NMR Study

The thermal equilibration of himic anhydride [IUPAC (2-endo,3-endo)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid anhydride] to (2-exo,3-exo)-bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylic acid anhydride and subsequent recrystallization of the exo-product can be performed as a standard undergraduate laboratory experiment requiring minimal equipment. The interpretation of the ¹H NMR spectra for these norbornene carboxylic anhydride molecules promotes an appreciation of constrained ring systems and factors that affect chemical shifts and coupling constants.

Surface Topography of Polyethylene Glycol Shell Nanoparticles Formed from Bottlebrush Block Copolymers Controls Interactions with Proteins and Cells

Although poly(ethylene glycol) (PEG) is commonly used in nanoparticle design, the impact of surface topography on nanoparticle performance in biomedical applications has received little attention, despite showing significant promise in the study of inorganic nanoparticles. Control of the surface topography of polymeric nanoparticles is a formidable challenge due to the limited conformational control of linear polymers that form the nanoparticle surface. In this work, we establish a straightforward method to precisely tailor the surface topography of PEGylated polymeric nanoparticles based on tuning the architecture of shape-persistent amphiphilic bottlebrush block copolymer (BBCP) building blocks. We demonstrate that nanoparticle formation and surface topography can be controlled by systematically changing the structural parameters of BBCP architecture. Furthermore, we reveal that the surface topography of PEGylated nanoparticles significantly affects their performance. In particular, the adsorption of a model protein and the uptake into HeLa cells were closely correlated to surface roughness and BBCP terminal PEG block brush width. Overall, our work elucidates the importance of surface topography in nanoparticle research as well as provides an approach to improve the performance of PEGylated nanoparticles.

A Review on Olefin Metathesis Reactions as a Green Method for the Synthesis of Organic Compounds

Olefin metathesis is a metal-mediated C-C bond exchange by which the two fragments within the olefin precursor are redistributed as a result of breaking the double bond to obtain a new product. Currently, most of the synthetic organic compounds, polymers, drugs, plastics, and other synthetic materials are synthesized via the application of olefin metathesis reactions. In this review, different types of olefin metathesis reactions with their plausible mechanisms and their application in synthetic organic chemistry have been discussed.

Stereoretentive Ring-Opening Metathesis Polymerization to Access All-cis Poly(p-phenylenevinylene)s with Living Characteristics

Poly(p-phenylenevinylene)s (PPVs), a staple of the conductive polymer family, consist of alternating alkene and phenyl groups in conjugation. The physical properties of this organic material are intimately linked to the cis/trans configuration of the alkene groups. While many synthetic methods afford PPVs with all-trans stereochemistry, very few deliver the all-cis congeners. We report herein a synthesis of all-cis PPVs with living characteristics via stereoretentive ring-opening metathesis polymerization (ROMP). Exquisite catalyst control allows for the preparation of homopolymers or diblock copolymers with perfect stereoselectivity, narrow dispersities, and predictable average molar masses. All-cis PPVs can then serve as light-responsive polymers through clean photoisomerization of the stilbenoid units.

Control over Imidazoquinoline Immune Stimulation by pH-Degradable Poly(norbornene) Nanogels

The reactivation of the innate immune system by toll-like receptor (TLR) agonists holds promise for anticancer immunotherapy. Severe side effects caused by unspecific and systemic activation of the immune system upon intravenous injection prevent the use of small-molecule TLR agonists for such purposes. However, a covalent attachment of small-molecule imidazoquinoline (IMDQ) TLR7/8 agonists to pH-degradable polymeric nanogels could be shown to drastically reduce the systemic inflammation but retain the activity to tumoral tissues and their draining lymph nodes. Here, we introduce the synthesis of poly(norbornene)-based, acid-degradable nanogels for the covalent ligation of IMDQs. While the intact nanogels trigger sufficient TLR7/8 receptor stimulation, their degraded version of soluble, IMDQ-conjugated poly(norbornene) chains hardly activates TLR7/8. This renders their clinical safety profile, as degradation products are obtained, which would not only circumvent nanoparticle accumulation in the body but also provide nonactive, polymer-bound IMDQ species. Their immunologically silent behavior guarantees both spatial and temporal control over immune activity and, thus, holds promise for improved clinical applications.

Cross-linking polymerization-induced self-assembly to produce branched core cross-linked star block polymer micelles

Copolymerizing a cross-linker in the PISA process spontaneously produces branched core cross-linked block polymer micelles.

Tuning H2S Release by Controlling Mobility in a Micelle Core

Drug delivery from polymer micelles has been widely studied, but methods to precisely tune rates of drug release from micelles are limited. Here, the mobility of hydrophobic micelle cores was varied to tune the rate at which a covalently bound drug was released. This concept was applied to cysteine-triggered release of hydrogen sulfide (H2S), a signaling gas with therapeutic potential. In this system, thiol-triggered H2S donor molecules were covalently linked to the hydrophobic blocks of self-assembled polymer amphiphiles. Because release of H2S is triggered by cysteine, diffusion of cysteine into the hydrophobic micelle core was hypothesized to control the rate of release. We confirmed this hypothesis by carrying out release experiments from H2S-releasing micelles in varying compositions of EtOH/H2O. Higher EtOH concentrations caused the micelles to swell, facilitating diffusion in and out of their hydrophobic cores and leading to faster H2S release from the micelles. To achieve a similar effect without addition of organic solvent, we prepared micelles with varying core mobility via incorporation of a plasticizing co-monomer in the core-forming block. The glass transition temperature (Tg) of the core block could therefore be precisely varied by changing the amount of the plasticizing co-monomer in the polymer. In aqueous solution under identical conditions, the release rate of H2S varied over 20-fold (t½ = 0.18 - 4.2 h), with the lowest Tg hydrophobic block resulting in the fastest H2S release. This method of modulating release kinetics from polymer micelles by tuning core mobility may be applicable to many types of physically encapsulated and covalently linked small molecules in a variety of drug delivery systems.

Combining a ligand photogenerator and a Ru precatalyst: a photoinduced approach to cross-linked ROMP polymer films

Although metathesis photoinduced catalysis is now well established, there is little development in thin film preparation using photochemically activated ring-opening metathesis polymerization (ROMP). Herein, a N-heterocyclic carbene (NHC) photogenerator (1,3-bis(mesityl)imidazolium tetraphenylborate) is combined with an inactive metathesis catalyst ([RuCl₂(p-cymene)]₂) to generate under UV irradiation an active catalyst (p-cymene)RuCl₂ (NHC), that is capable of producing in a single step cross-linked copolymer films by ROMP of norbornene with dicyclopentadiene. The study shows that the photoinitiated catalytic system can be optimized by increasing the yield of photogenerated NHC through a sensitizer (2-isopropylthioxanthone), and by choosing [RuI₂(p-cymene)]₂ as precatalyst to provide a long-term photolatency. The cross-linked polymer structure is investigated by a range of techniques including gel content measurement, FT-IR and solid-state ¹³C NMR spectroscopy, TGA and DSC, which reveal a cross-linking mechanism proceeding through both metathesis and olefin coupling.

Photoactivated ROMP is harnessed for the single-step formation of cross-linked polymer coatings based on norbornene and dicyclopentadiene.

Recent advances in ruthenium-based olefin metathesis

Ruthenium-based olefin metathesis catalysts, known for their functional group tolerance and broad applicability in organic synthesis and polymer science, continue to evolve as an enabling technology in these areas. A discussion of recent mechanistic investigations is followed by an overview of selected applications.

Structural Color for Additive Manufacturing: 3D-Printed Photonic Crystals from Block Copolymers

The incorporation of structural color into 3D printed parts is reported, presenting an alternative to the need for pigments or dyes for colored parts produced through additive manufacturing. Thermoplastic build materials composed of dendritic block copolymers were designed, synthesized, and used to additively manufacture plastic parts exhibiting structural color. The reflection properties of the photonic crystals arise from the periodic nanostructure formed through block copolymer self-assembly during polymer processing. The wavelength of reflected light could be tuned across the visible spectrum by synthetically controlling the block copolymer molecular weight and manufacture parts that reflected violet, green, or orange light with the capacity to serve as selective optical filters and light guides.

H2S-Releasing Polymer Micelles for Studying Selective Cell Toxicity

We report the preparation of S-aroylthiooxime (SATO) functionalized amphiphilic block copolymer micelles that release hydrogen sulfide (H₂S), a gaseous signaling molecule of relevance to various physiological and pathological conditions. The micelles release H₂S in response to cysteine with a half-life of 3.3 h, which is substantially slower than a related small molecule SATO. Exogenous administration of H₂S impacts growth and proliferation of cancer cells; however, the limited control over H₂S generation from inorganic sulfide sources results in conflicting reports. Therefore, we compare the cellular cytotoxicity of SATO-functionalized micelles, which release H₂S in a sustained manner, to Na₂S, which releases H₂S in a single dose. Our results show that H₂S-releasing micelles significantly reduce the survival of HCT116 colon cancer cells relative to Na₂S, GYY4137, and a small molecule SATO, indicating that release kinetics may play an important role in determining toxicity of H₂S toward cancer cells. Furthermore, H₂S-releasing micelles are well tolerated by immortalized fibroblasts (NIH/3T3 cells), suggesting a selective toxicity of H₂S toward cancer cells.

Advantages and limitations of diisocyanates in intramolecular collapse

A comprehensive examination of the synthesis of single chain polymer nanoparticles (SCPNs) from a copolymer of methyl acrylate (MA) and 2-hydroxyethyl acrylate (HEA) via the intra-chain urethane formation by using hexamethylene diisocyanate (HDI) as a cross-linker is described.

Preparation of thermo-responsive graft copolymer by using a novel macro-RAFT agent and its application for drug delivery

A methodology to prepare thermo-responsive graft copolymer by using a novel macro-RAFT agent was proposed. The macro-RAFT agent with pendant dithioester (ZC(S)SR) was facilely prepared via the combination of RAFT polymerization and esterification reaction. By means of ZC(S)SR-initiated RAFT polymerization, the thermo-responsive graft copolymer consisting of poly(methyl methacrylate-co-hydroxylethyl methacrylate) (P(MMA-co-HEMA)) backbone and hydrophilic poly(N-isopropylacrylamide) (PNIPAAm) side chains was constructed through the "grafting from" approach. The chemical compositions and molecular weight distributions of the synthesized polymers were respectively characterized by (1)H nuclear magnetic resonance ((1)H NMR) and gel permeation chromatography (GPC). Self-assembly behavior of the amphiphilic graft copolymers (P(MMA-co-HEMA)-g-PNIPAAm) was studied by transmission electron microscopy (TEM), dynamic light scattering (DLS) and spectrofluorimeter. The critical micelle concentration (CMC) value was 0.052 mg mL(-1). These micelles have thermo-responsibility and a low critical solution temperature (LCST) of 33.5°C. Further investigation indicated that the guest molecule release property of these micelles, which can be well described by a first-order kinetic model, was significantly affected by temperature. Besides, the micelles exhibited excellent biocompatibility and cellular uptake property. Hence, these micelles are considered to have potential application in controlled drug delivery.

Intramolecular olefin metathesis as a robust tool to synthesize single-chain nanoparticles in a size-controlled manner

A comprehensive investigation of ruthenium-catalyzed intramolecular olefin metathesis was conducted for establishing a general approach to synthesize size-controlled SCNPs.

A Robust, Recyclable Resin for Decagram Scale Resolution of (±)-Mefloquine and Other Chiral N-Heterocycles

Decagram quantities of enantiopure (+)-mefloquine have been produced via kinetic resolution of racemic mefloquine using a ROMP-gel supported chiral acyl hydroxamic acid resolving agent. The requisite monomer was prepared in a few synthetic steps without chromatography and polymerization was safely performed on a >30 gram scale under ambient conditions. The reagent was readily regenerated and reused multiple times for the resolution of 150 grams of (±)-mefloquine and other chiral N-heterocylces.

Highly ordered dielectric mirrors via the self-assembly of dendronized block copolymers

Dendronized block copolymers were synthesized by ruthenium-mediated ring-opening methathesis polymerization of exo-norbornene functionalized dendrimer monomers, and their self-assembly to dielectric mirrors was investigated. The rigid-rod main-chain conformation of these polymers drastically lowers the energetic barrier for reorganization, enabling their rapid self-assembly to long-range, highly ordered nanostructures. The high fidelity of these dielectric mirrors is attributed to the uniform polymer architecture achieved from the construction of discrete dendritic repeat units. These materials exhibit light-reflecting properties due to the multilayer architecture, presenting an attractive bottom-up approach to efficient dielectric mirrors with narrow band gaps. The wavelength of reflectance scales linearly with block-copolymer molecular weight, ranging from the ultraviolet, through the visible, to the near-infrared. This allows for the modulation of photonic properties through synthetic control of the polymer molecular weight. This work represents a significant advancement in closing the gap between the precision obtained from top-down and bottom-up approaches.