A Luminescent Microporous Metal−Organic Framework for the Recognition and Sensing of Anions

Lanthanide metal-organic frameworks as ratiometric fluorescent probes for real-time monitoring of PFOA photocatalytic degradation process

The assessment of perfluorooctanoic acid (PFOA) photocatalytic degradation usually involves tedious pre-treatment and sophisticated instrumentation, making it impractical to evaluate the degradation process in real-time. Herein, we synthesized a series of lanthanide metal-organic frameworks (Ln-MOFs) with outstanding fluorescent sensing properties and applied them as luminescent probes in the photocatalytic degradation reaction of PFOA for real-time evaluation. As the catalytic reaction proceeds, the fluorescence color changes significantly from green to orange-red due to the different interaction mechanisms between the electron-deficient PFOA and smaller radius F- with the ratiometric fluorescent probe MOF-76 (Tb: Eu = 29:1). The limit of detection (LOD) was calculated to be 0.0127 mM for PFOA and 0.00746 mM for F-. In addition, the conversion rate of the catalytic reaction can be read directly based on the chromaticity value by establishing a three-dimensional relationship graph of G/R value-conversion rate-time (G/R indicates the ratio between green and red luminance values in the image.), allowing for real-time and rapid tracking of the PFOA degradation. The recoveries of PFOA and F- in the actual water samples were 99.3-102.7% (RSD = 2.2-4.4%) and 100.7-105.3% (RSD = 3.9-6.8%), respectively. Both theoretical calculations and experiments reveal that the detection mechanism was attributed to the photoinduced electron transfer and energy transfer between the analytes and the probe. This method simplifies the sample analysis process and avoids the use of bulky instruments, and thus has great potential on the design and development of quantitative time-resolved visualization methods to assess catalytic performance and reveal mechanisms.

Nanoscale Metal-Organic Frameworks as a Photoluminescent Platform for Bioimaging and Biosensing Applications

The tracking of nanomedicines in their concentration and location inside living systems has a pivotal effect on the understanding of the biological processes, early-stage diagnosis, and therapeutic monitoring of diseases. Nanoscale metal-organic frameworks (nano MOFs) possess high surface areas, definite structure, regulated optical properties, rich functionalized sites, and good biocompatibility that allow them to excel in a wide range of biomedical applications. Controllable syntheses and functionalization endow nano MOFs with better properties as imaging agents and sensing units for the diagnosis and treatment of diseases. This minireview summarizes the tunable synthesis strategies of nano MOFs with controllable size, shape, and regulated luminescent performance, and pinpoints their recent advanced applications as optical elements in bioimaging and biosensing. The current limitations and future development directions of nano MOF-contained materials in bioimaging and biosensing applications are also discussed, aiming to expand the biological applications of nano MOF-based nanomedicine and facilitate their production or clinical translation.

The influence of HKUST-1 and MOF-76 hand grinding/mechanical activation on stability, particle size, textural properties and carbon dioxide sorption

In this study, we explore the mechanical treatment of two metal-organic frameworks (MOFs), HKUST-1 and MOF-76, applying various milling methods to assess their impact on stability, porosity, and CO2 adsorption capacity. The effects of different mechanical grinding techniques, such as high-energy ball milling and hand grinding, on these MOFs were compared. The impact of milling time, milling speed and ball size during high-energy ball milling was assessed via the Design of Experiments methodology, namely using a 33 Taguchi orthogonal array. The results highlight a marked improvement in CO2 adsorption capacity for HKUST-1 through hand milling, increasing from an initial 25.70 wt.% (5.84 mmol g-1) to 41.37 wt.% (9.40 mmol g-1), marking a significant 38% increase. In contrast, high-energy ball milling seems to worsen this property, diminishing the CO2 adsorption abilities of the materials. Notably, MOF-76 shows resistance to hand grinding, closely resembling the original sample's performance. Hand grinding also proved to be well reproducible. These findings clarify the complex effects of mechanical milling on MOF materials, emphasising the necessity of choosing the proper processing techniques to enhance their stability, texture, and performance in CO2 capture and storage applications.

Selective fluoride sensing by a novel series of lanthanide-based one-dimensional coordination polymers through intramolecular proton transfer

A novel series of one-dimensional coordination polymers (CPs) is achieved via a facile one-pot synthesis strategy employing the nitrate salts of trivalent lanthanides, a pentadentate chelating ligand, and triphenylphosphine oxide at a controlled stoichiometry under ambient conditions. All the CPs are characterized comprehensively using spectroscopic, X-ray crystallographic and magnetometric studies. The CPs are found to be thermally stable up to a significantly high temperature and resistant to water for an indefinite time. They are photoactive and exhibit selective fluoride ion (F-) sensing with excellent efficiency both colorimetrically and fluorimetrically in the solid-state as well as in solution. The presence of F- concomitantly sensitizes the photoluminescence enhancement and visual decolourization of the CPs in solution owing to the ground-state intra-molecular proton transfer. The photophysical response of the CPs to F- in solution was found to be instantaneous (<30 s). The sensitivity of detection is observed to be significantly high over a wide range of F- concentrations, covering the beneficial and detrimental domains of F- concentrations in drinking water. The limit of detection (LoD) under ambient conditions was found to be in the micromolar (μM) range-the best being 0.22 μM found using UV-vis spectrometry and 7.5 μM using fluorimetry. In comparison, the USEPA standard cut-off for the upper limit of F- concentration in drinking water is 211 μM, and the LoD of measuring F- concentration using the USEPA standard method using a fluoride-selective electrode is 26.3 μM. The CPs display markedly high selectivity toward F- with negligible-to-no interference from the commonly abundant ions (Cl-, Br-, I-, CH3CO2-, CO32-, SO42-, HPO42-, NH4+, Na+, K+, Mg2+, and Ca2+) in terms of UV-vis spectral change. Moreover, they also exhibit solid-state IR-spectrometric sensitivity towards F- under ambient conditions.

Chromone-Based Cd(II) Fluorescent Coordination Polymer Fabricated to Study Optoelectronic and Explosive Sensing Properties

Here, electrical conductivity and explosive sensing properties of multifunctional chromone-Cd(II)-based coordination polymers (CPs) (1-4) have been explored. The presence of different pseudohalide linkers, thiocyanate ions, and dicyanamide ions resulted in 1D and 3D architecture in the CPs. Thin film devices developed from CPs 1-4 (complex-based Schottky devices, CSD1, CSD2, CSD3, and CSD4, respectively) showed semiconductor behavior. Their conductivity values increased under photo illumination (1.37 × 10-5, 1.85 × 10-5, 1.61 × 10-5, and 2.01 × 10-5 S m-1 under dark conditions and 5.06 × 10-5, 8.78 × 10-5, 7.26 × 10-5, and 10.21 × 10-5 S m-1 under light). The nature of the I-V plots of these thin film devices under light irradiation and dark are nonlinear rectifying, which has been observed in Schottky barrier diodes (SBDs). All four CPs (1-4) exhibited highly selective fluorescence quenching-based sensing properties toward well-known explosives, 2,4-dinitrophenol (DNP) and 2,4,6-trinitrophenol (TNP). The limit of detection (LOD) values are 55, 28, 27, and 31 μM for TNP and 78, 44, 32, and 41 μM for DNP for complexes 1-4, respectively. A structure property correlation has been established to explain optoelectronic and explosive sensing properties.

Luminescent lanthanide complexes based on 4,5-di(3,5-dicarboxylphenoxy)phthalic acid as enhanced fluorescence probes for highly selective detection of lead(II) ions in water

Six novel lanthanide complexes ([Nd2(L)(H2O)6]n·4.58n(H2O) (1), [Ln(H3L)(H2O)]n·0.5n(H2O), Ln = Sm (2), Eu (3), Gd (4), Tb (5), Eu0.18Gd0.62Tb0.20 (6)) have been hydrothermally synthesized based on the ligand 4,5-di(3,5-dicarboxylphenoxy)phthalic acid (H6L). Single crystal X-ray diffraction reveals that complexes 1-6 are 2D structures, where 2-6 are isomorphic. Complexes 3 and 5 exhibit the characteristic fluorescence of Eu(III) and Tb(III) ions respectively, while complex 4 shows blue-green light emission based on the ligand. In particular, the ternary Eu/Gd/Tb complex 6 shows white light emission with a CIE (Commission International del'Eclairage) chromaticity coordinate of (0.330, 0.339) and hence close to pure white light emission. Moreover, complexes 3 and 5 display specific fluorescence-enhanced detection performance for Pb2+ ions: The interaction between Pb2+ ions and the ligand enhances the charge transfer efficiency between the ligand and the Eu(III) and Tb(III) ions and thus leads to fluorescence enhancement of complexes 3 and 5. More importantly, complex 3 exhibits the lowest detection limit of 4.72 nM for Pb2+ ions among the existing complex fluorescent probes. In addition, both complexes 3 and 5 show good performance for recycling and for the detection of Pb2+ in real water samples.

Ultrasensitive Eu-Based MOF Luminescence Sensor for Clenbuterol Visible Recognition

Clenbuterol (CLB) as an illegal feed additive may cause a great security risk to food safety. However, convenient and efficient detection means for CLB in practical application remain a formidable challenge. Herein, a stable Eu-based organic framework {[H2N(CH3)2]2[Eu2(ttca)2]·H2O}n (compound 1) (H4ttca = [1,1':2',1″-terphenyl]-4,4',4″,5'-tetracarboxylic acid) has been harvested, exhibiting excellent chemical stability and thermal stability. Luminescence investigation reveals that compound 1 can sensitively and selectively detect CLB without being affected by different components from simulated serum and urine (limit detection: 22.7 nM). Furthermore, sensor 1 can also be applicable to CLB recognition in real swine feeds, presenting excellent anti-interference performance. The good cyclicity of compound 1 endows CLB determination with many advantages: low cost, high stability, and simplicity. Importantly, in view of the indication of the luminescence color (red to blue), test membranes were fabricated and employed for convenient and fast CLB detection, providing a valuable scheme for the visual monitoring of CLB in meat products. This work enriches rare earth metal compounds and luminescence sensor portfolios and breaks the concentration record (nM) for detecting CLB compared with reported complex materials, providing an effective monitoring platform for CLB visually.

Acute toxicity of nanoscale zeolitic imidazolate framework 8 (ZIF-8) to saltwater planktonic species Artemia salina and Nannochloropsis oculata

Zeolitic imidazolate framework-8 nanoparticles (ZIF-8 NPs) are metal-organic frameworks (MOFs) that have gained significant attention in various fields due to their unique properties. They have potential applications in drug delivery, gas storage, and catalysis. However, their increasing use raises concerns about their potential environmental impact. Our study evaluates the effects of ≈90 nm ZIF-8 NPs in two planktonic species, the green microalga Nannochloropsis oculata and the brine shrimp Artemia salina. After synthesis and characterization (SEM, EDS, BET, and DLS) of nanoporous ZIF-8 NPs, a growth inhibition test on microalgae (72 h) and acute immobilization test on instar I and II of Artemia nauplii (48 h) were conducted following, OECD 201 and ISO/TS 20787, respectively. The toxicity of ZIF-8 NPs to both species was time- and concentration-dependent. The 72-h median inhibitory concentration (IC50) of ZIF-8 NPs for N. oculata based on average specific growth rate and yield were calculated as 79.71 ± 8.55 mg L-1 and 51.73 ± 5.16 mg L-1, respectively. Also, the 48-h median effective concentration (EC50) of ZIF-8 NPs on immobilization rate of instar I and II were calculated as 175.09 ± 4.14 mg L-1 and 4.69 ± 0.34 mg L-1, respectively. Moreover, the swimming type of non-immobilized animals was affected by ZIF-8 NPs. These findings provide a good insight into the toxicity of nanoparticulate ZIF-8 to saltwater planktons and also confirm that instar II Artemia is more sensitive than instar I. This study demonstrated that ZIF-8 NPs, despite all their advantages, could have toxic effects on aquatic organisms. More studies are required to assess their potential environmental impact and develop strategies to mitigate their toxicity.

A Doped Lanthanide-Based Coordination Polymer Exhibiting High Relative Sensitivity to Ratiometric Luminescent Thermometers at 440 K

Ratiometric luminescent thermometers with excellent performance often require the luminescent materials to possess high thermal stability and relative sensitivity (Sr). However, such luminescent materials are very rare, especially in physiological (298-323 K) and high-temperature (>373 K) regions. Here we report the synthesis and luminescent property of [Tb0.995Eu0.005(pfbz)2(phen)Cl] (3), which not only exhibits high Sr in physiological temperature but also has a Sr up to 7.47% K-1 at 440 K, the largest Sr at 440 K in known lanthanide-based coordination compound luminescent materials.

A highly stable terbium(III) metal-organic framework MOF-76(Tb) for hydrogen storage and humidity sensing

The present study described the synthesis and characterization of MOF-76(Tb) for hydrogen storage and humidity sensing applications. The structure and morphology of as-synthesized material were studied using powder X-ray diffraction, scanning, and transmission electron microscopy. The crystal structure of MOF-76(Tb) consists of terbium(III) and benzene-1,3,5-tricarboxylate(-III) ions, one coordinated aqua ligand and one crystallization N,N´-dimethylformamide molecule. The polymeric framework of MOF-76(Tb) contains 1D sinusoidally shaped channels with sizes of 6.6 × 6.6 Å propagating along c crystallographic axis. The thermogravimetric analysis of the prepared material exhibited thermal stability up to 600 °C. At 77 K and pressure up to 20 bar; 0.6 wt.% hydrogen storage capacity for MOF-76(Tb) was observed. Finally, the humidity sensing measurements (water adsorption experiments) were performed, and the results indicate that MOF-76(Tb) is not a suitable material for moisture sensing applications.

Stable Lanthanide-Organic Frameworks: Crystal Structure, Photoluminescence, and Chemical Sensing of Vanillylmandelic Acid as a Biomarker of Pheochromocytoma

Several isostructural lanthanide metal-organic frameworks, viz. [Ln(DCHB)_1.5phen]_n (Ln-MOFs, where Ln = Eu for 1, Tb for 2, Sm for 3 and Dy for 4), are successfully synthesized through the hydrothermal reactions of 4'-di(4-carboxylphenoxy)hydroxyl-2, 2'-bipyridyl (H₂DCHB) and lanthanide nitrates as well as chelator 1,10-phenantroline (phen). These structures are characterized by single-crystal X-ray diffraction, and the representative Ln-MOF 1 is a fivefold interpenetrated framework with the uncoordinated Lewis base N sites form DCHB^2- ligands. The photoluminescence research studies reveal that Ln-MOFs 1-4 exhibit characteristic fluorescent emissions from ligand-induced lanthanide Ln(III) ions, while the single-component emission spectra of Ln-MOF 4 are all located in a white region under different excitations. The absence of coordinated water and the interpenetration property of the structures are conducive to the structure rigidity, and the results display that Ln-MOF 1 has high thermal/chemical stabilities in common solvents and a wide pH range as well as the boiling water. Notably, luminescent sensing studies reveal that Ln-MOF 1 with prominent fluorescence properties can perform in highly sensitive and selective sensing of vanillylmandelic acid (VMA) in aqueous systems (K_SV = 562.8 L·mol^-1; LOD = 4.6 × 10^-4 M), which can potentially establish a detection platform for the diagnosis of pheochromocytoma via multiquenching mechanisms. Moreover, the 1@MMMs sensing membranes comprised of Ln-MOF 1 and a poly(vinylidene fluoride) (PVDF) polymer can also be facilely developed for VMA detection in aqueous media, suggesting the enhanced convenience and efficiency of practical sensing applications.

Nucleotide-Based Lanthanide Coordination Polymer Nano-Probe for Turn-On Fluorescence Sensing of Zn2+ in Serum

BACKGROUND

Water-dispersed lanthanide coordination polymers (LCPs) have attracted considerable attention owing to their superiority in bioanalysis. However, so far, most of the reported LCPs, due to the employment of water-insoluble and toxic organic molecules as ligands, are only competent in organic solution or the gaseous phase. Therefore, the construction of a water-dispersed, LCP-based, especially LCP nanoparticle (LCPNP)-based, sensor is still lacking and challenging.

OBJECTIVE

The aim was to obtain a novel and effective LCPNP-based sensor for Zn2+ by simple self-assembly, utilizing water-soluble guanosine monophosphate (GMP) as ligand and Eu3+ as luminescence center, .

METHODS

In aqueous solutions, Eu-GMP NPs were formed via self-assembly reaction between Eu3+ and GMP, and displayed very weak fluorescence due to low energy transfer from GMP to Eu3+ and the rate constant of nonradiactive deactivation of the excited states caused by the O-H vibration of coordinated water molecules. After the introduce of Zn2+, forming Eu-GMP/Zn, very interestingly, an 8-fold fluorescence enhancement was observed due to the removal of coordination water molecules and fluorescence sensitization of Zn2+.

RESULTS

The fluorescence intensity of Eu-GMP NPs at 614 nm showed a linear relationship with the concentration of Zn2+ from 4 to 240 μM with a detection limit of 4 μM. Due to possessing long fluorescence, Eu-GMP showed prominent achievment for application in serum Zn2+ determination.

CONCLUSION

The LCPNP probe exhibited excellent performance for the determination of Zn2+ in serum.

HIGHLIGHTS

For the first time, we developed and designed a kind of water-dispersed, LCPNP-based turn-on fluorescence assay for Zn2+ in serum. High sensitivity and good recoveries were achieved due to long fluorescence life, good water-dispersed behavior, and the turn-on fluorescence response of the LCPNP probe.

A 12-Connected [Y4((μ3-OH)4]8+ Cluster-Based Luminescent Metal-Organic Framework for Selective Turn-on Detection of F- in H2O

Fluoride ion (F^-) is one of the most hazardous elements in potable water. Over intake of F^- can give rise to dental fluorosis, kidney failure, or DNA damage. As a result, developing affordable, equipment-free and credible approaches for F^- detection is an important task. In this work, a new three dimensional rare earth cluster-based metal-organic framework assembled from lanthanide Y(III) ion, and a linear multifunctional ligand 3-nitro-4,4'-biphenyldicarboxylic acid, formulated as {[Y(μ₃-OH)]₄[Y(μ₃-OH)(μ₂-H₂O)_0.25(H₂O)_0.5]₄[μ₄-nba]₈}_n (1), where H₂nba = 3-nitro-4,4'-biphenyldicarboxylic acid, has been hydrothermally synthesized and characterized through infrared spectroscopy (IR), elemental and thermal analysis (EA), power X-ray diffraction (PXRD), and single-crystal X-ray diffraction (SCXRD) analyses. X-ray diffraction structural analysis revealed that 1 crystallizes in tetragonal system with P4¯2₁m space group, and features a 3D framework with 1D square 18.07(3)² Ų channels running along the [0,0,1] or c-axis direction. The structure of 1 is built up of unusual eight-membered rings formed by two types of {Y₄O₄} clusters connected to each other via 12 μ₄-nba^2- and 4 μ₃-OH^- ligands. Three crystallographic independent Y³⁺ ions display two coordinated configurations with a seven-coordinated distorted monocapped trigonal-prism (YO₇) and an eight-coordinated approximately bicapped trigonal-prism (YO₈). 1 is further stabilized through O-H⋯O, O-H⋯N, C-H⋯O, and π⋯π interactions. Topologically, MOF 1 can be simplified as a 12-connected 2-nodal Au₄Ho topology with a Schläfli symbol {4²⁰·6²⁸·8¹⁸}{4³}₄ or a 6-connected uninodal pcu topology with a Schläfli symbol {4¹²·6³}. The fluorescent sensing application of 1 was investigated to cations and anions in H₂O. 1 exhibits good luminescence probing turn-on recognition ability toward F^- and with a limit detection concentration of F^- down to 14.2 μM in aqueous solution (K_ec = 11403 M^-1, R² = 0.99289, σ = 0.0539). The findings here provide a feasible detection platform of LnMOFs for highly sensitive discrimination of F^- in aqueous media.

MOF/MWCNT-Nanocomposite Manipulates High Selectivity to Gas via Different Adsorption Sites with Varying Electron Affinity: A Study in Methane Detection in Parts-per-Billion

Metal-organic frameworks (MOFs) present specific adsorption sites with varying electron affinity which are uniquely conducive to selective gas sensing but are typically large-band-gap insulators. On the contrary, multiwall carbon nanotubes (MWCNTs) exhibit superior mesoscopic transport exploiting strong electron correlations among sub-bands below and above the Fermi level at room temperature. We synergize them in a new class of nanocomposites based on zeolitic imidazolate framework-8 (ZIF-8) and report selective sensing of CH₄ in ∼10 parts-per-billion (ppb) with a determined limit of detection of ∼0.22 ppb, hitherto unprecedented. The observed selectivity to CH₄ over non-polar CO₂, polar volatile organic compounds, and moisture has roots in competing electron-sharing mechanisms at its different adsorption sites. This important result provides a significant reference to guide future MOF-related composite research to achieve the best sensing performance. On molecular adsorption, MWCNTs facilitate electrical transport via manipulating the ZIF-8 band gap to show a p-type semiconductor behavior with lower activation energy to induce a measurable resistance change. Excellent repeatability and reversibility are shown. A carbon-engineered MOF composite has the potential to actuate similar selective response to low reactive gases via carrier manipulation in the energy band gap.

Dinuclear Lanthanide Compound as a Promising Luminescent Probe for Al3+ Ions

Luminescent probes have wide applications in biological system analysis and environmental science. Here, one novel luminescent dinuclear europium compound with a crown ether analogous ligand was synthesized through a solvent-thermal reaction. Through transformation, upon the addition of Al³⁺ ions to the N,N'-dimethyl formamide solution of the europium compound, the luminescent intensity of the characteristic emission of Eu³⁺ decreased, and a new emission peak appeared at 346 nm and increased rapidly. The luminescent investigation indicated that it could act as a highly sensitive and selective luminescent probe for Al³⁺ ions. Moreover, mass spectrometry and single-crystal X-ray diffraction confirmed the formation of a new more stable trinuclear aluminium compound during the sensing process.

Recyclable Luminescent Sensor for Detecting Creatinine Based on a Lanthanide-Organic Framework

Creatinine is an important clinical marker for human health, but detecting it by a luminescent sensor based on metal-organic frameworks is rarely investigated. In this work, we synthesized a new lanthanide-organic framework {[Tb(L)(CH₃COO)(H₂O)]·0.5DMF}_n (1) (H₂L = 3,5-bis(4'-carboxy-phenyl)1,2,4-triazole) with good solvent and acid/alkaline stabilities. Experimental results indicate that 1 can be used in the detection of creatinine in an aqueous solution with a wide linear detection range from 3.27 to 371 μM, and the detection limit can reach 1.7 × 10^-6 M based on the 3σ method, which is less than the pathogenic concentration in a real environment. In addition, this luminescent sensor can also monitor the concentration changes of creatinine in diluted serum solutions and can be recycled at least five times, suggesting that it has a potential application for clinical monitoring.

Dual-emitting metal-organic frameworks for ratiometric fluorescence detection of fluoride and Al3+ in sequence

Fluoride (F^-) and Al³⁺ are two common ions existing in drinking water and natural water bodies. Excessive intake of F^- can lead to serious health issues such as fluorosis and bone diseases while accumulated consumption of Al³⁺ may cause neurotoxicity-based diseases. Developing a fast, reliable, and sensitive sensor for visually detecting both F^- and Al³⁺ is of great significance. In the present work, a ratiometric fluorescence sensor was constructed by incorporating rhodamine B (RhB) in situ into a zirconium-based metal-organic framework, UiO-66-NH₂. The obtained nanocomposite UiO-66-NH₂@RhB exhibited similar octahedral structure to UiO-66-NH₂ with high BET surface area, and showed two emission peaks at 450 nm and 585 nm. The blue fluorescence from UiO-66-NH₂ was enhanced by the addition of F^- while subsequent Al³⁺ addition diminished the increased fluorescence intensity, and the red emission from RhB as the reference remained unchangeable to improve the detection precision. Under optimal conditions, detection of limits as low as 1.55 μM for F^- and 0.54 μM for Al³⁺ in aqueous solution were achieved with good selectivity. High recoveries in drinking water samples were also acquired, showing potential applications of this ratiometric fluorescence sensor for practical evaluation of F^- and Al³⁺.

Bimetallic Cd/Zr-UiO-66 material as a turn-on/off probe for As5+/Fe3+ in organic media

In this work, a series of bimetallic Cd/Zr-UiO-66 materials were successfully synthesized for fluorescence sensing toward traces of As⁵⁺ and Fe³⁺ via a one-pot method. Interestingly, the obtained bimetallic Cd/Zr-UiO-66 (1:9) can be served as turn-on probe for As⁵⁺ as well as turn-off probe for Fe³⁺. The LODs of Cd/Zr-UiO-66 (1:9) toward As⁵⁺ and Fe³⁺ were calculated to be 5.4 μM and 4.3 μM, respectively, indicating its effective sensing properties for As⁵⁺ and Fe³⁺ in methanol media. Moreover, even in the presence of other potentially interfering toxic metal ions such as As³⁺, Cd²⁺ and Pb²⁺, Cd/Zr-UiO-66 (1:9) still presented good anti-interference abilities. Additionally, the removal efficiency of Cd/Zr-UiO-66 (1:9) toward As⁵⁺ was higher than 70% when the initial As⁵⁺ was lower than 50 mg/L. The fluorescence quenching of Fe³⁺ were mainly due to the competitive absorption of excitation source and RET, while the ACE mechanism was mostly responsible for the enhancement of As⁵⁺. More importantly, this job might pave the way for future researches and applications on sensing As⁵⁺ and Fe³⁺.

A microporous anionic metal–organic framework for aqueous encapsulation and highly reversible sensitization of light-emitting Tb3+ ions

An anionic porous material can serve as both a host and an antenna for protecting and sensitizing extra-framework light-emitting Eu3+/Tb3+ ions. The Tb3+ uptake and release is a reversible process and the cationic Tb3+ can be gradually released.

Selective luminescent sensing of metal ions and nitroaromatics over a porous mixed-linker cadmium(ii) based metal–organic framework

A potential luminescent sensor based on porous metal organic framework for the detection of metal ions (Al3+, Fe3+ or Cr3+) and nitro-explosive, 2,4,6-tri-nitrophenol has been discovered. MOF is capable of detecting aqueous phase analyte through luminescent sensing.

Fluorescent Zn(II) frameworks with multicarboxylate and pyridyl N-donor ligands for sensing specific anions and organic molecules

Three novel fluorescent Zn(II) frameworks, namely [Zn(DPA)(NDA)]2·2DMF (1), [Zn2(DPA)(OBA)2]·2DMF·4H2O (2) and [Zn(DPA)(HNTB)]·H2O (3) (DPA = 2,5-di(pyridin-4-yl)aniline, H2NDA = 1,4-naphthalenedicarboxylic acid, H2OBA = 4,4'-oxydibenzoic acid, H3NTB = 4,4',4''-nitrilotribenzoic acid, DMF =...

A switchable sensor and scavenger: detection and removal of fluorinated chemical species by a luminescent metal-organic framework

Fluorosis has been regarded as a worldwide disease that seriously diminishes the quality of life through skeletal embrittlement and hepatic damage. Effective detection and removal of fluorinated chemical species such as fluoride ions (F⁻) and perfluorooctanoic acid (PFOA) from drinking water are of great importance for the sake of human health. Aiming to develop water-stable, highly selective and sensitive fluorine sensors, we have designed a new luminescent MOF In(tcpp) using a chromophore ligand 2,3,5,6-tetrakis(4-carboxyphenyl)pyrazine (H₄tcpp). In(tcpp) exhibits high sensitivity and selectivity for turn-on detection of F⁻ and turn-off detection of PFOA with a detection limit of 1.3 μg L⁻¹ and 19 μg L⁻¹, respectively. In(tcpp) also shows high recyclability and can be reused multiple times for F⁻ detection. The mechanisms of interaction between In(tcpp) and the analytes are investigated by several experiments and DFT calculations. These studies reveal insightful information concerning the nature of F⁻ and PFOA binding within the MOF structure. In addition, In(tcpp) also acts as an efficient adsorbent for the removal of F⁻ (36.7 mg g⁻¹) and PFOA (980.0 mg g⁻¹). It is the first material that is not only capable of switchable sensing of F⁻ and PFOA but also competent for removing the pollutants via different functional groups.

A robust In-MOF, In(tcpp), demonstrates sensitive detection of the fluorinated chemical species F⁻ and PFOA via distinctly different luminescence signal change, and effective adsorption and removal of both species from aqueous solution.

Second-Sphere Interaction Promoted Turn-On Fluorescence for Selective Sensing of Organic Amines in a TbIII -based Macrocyclic Framework

Guided by a second-sphere interaction strategy, we fabricated a Tb(III)-based metal-organic framework (MMCF-4) for turn-on sensing of methyl amine with ultra-low detection limit and high turn-on efficiency. MMCF-4 features lanthanide nodes shielded in a nonacoordinate geometry along with secondary coordination spheres that are densely populated with H-bond interacting sites. Nonradiative routes were inhibited by binding-induced rigidification of the ligand on the second coordination sphere, resulting in luminescence amplification. Such remote interacting mechanism involved in the turn-on sensing event was confirmed by single-crystal X-ray diffraction and molecular dynamic simulation studies. The design of both primary and secondary coordination spheres of Tb(III) enabled the first turn-on sensing of organic amines in aqueous conditions. Our work suggests a promising strategy for high-performance turn-on sensing for Ln-MOFs and luminous materials driven by other metal chromophores.

Chiral Fluorescent Metal-Organic Framework with a Pentanuclear Copper Cluster as an Efficient Luminescent Probe for Dy3+ Ion and Cyano Compounds

Luminescent probes have been used for the detection of various heavy metals and toxic compounds. A novel sensor with excellent sensitivity and selectivity is in high demand. Herein, we designed and synthesized a three-dimensional copper-organic framework of "pcu" α-Po primitive cubic topology with a Schläfli symbol of {4.4.4.4.4.4.4.4.4.4.4.4.*.*.*}. By taking advantage of metal clusters and a triazole ligand as the metal-organic framework (MOF) components, the newly obtained MOF is stable in various environments and can be potentially used as the sensor. Remarkably, this MOF-based sensor shows high sensitivity and selectivity toward a dysprosium ion (Dy³⁺) in a multiple-lanthanide mixed solution. Besides, it exhibits luminescent quenching toward various cyano compounds. This chiral cluster-based network provides a potential luminescent probe for various inorganic and organic compounds with high sensitivity and selectivity.

Sensing Properties of NH2-MIL-101 Series for Specific Amino Acids via Turn-On Fluorescence

Metal-organic frameworks (MOFs) have been demonstrated to be desired candidates for sensing definite species owing to their tunable composition, framework structure and functionality. In this work, the NH2-MIL-101 series was utilized for sensing specific amino acids. The results show that cysteine (Cys) can significantly enhance the fluorescence emission of NH2-MIL-101-Fe suspended in water, while NH2-MIL-101-Al exhibits the ability to sense lysine (Lys), arginine (Arg) and histidine (His) in aqueous media via turn-on fluorescence emission. Titration experiments ensure that NH2-MIL-101-Fe and NH2-MIL-101-Al can selectively and quantitatively detect these amino acids. The sensing mechanism was examined and discussed. The results of this study show that the metal centers in MOFs are crucial for sensing specific amino acids.

Ultrathin porous amine-based solid adsorbent incorporated zeolitic imidazolate framework-8 membrane for gas separation

A novel gas separation approach is proposed in this work by combining an amine-based solid adsorbent with a zeolitic imidazolate framework-8 (ZIF-8) membrane. This was achieved by incorporating the amine-based solid adsorbent during the fabrication of the ZIF-8 membrane on a macroporous substrate. An amine-based solid adsorbent was prepared using porous ZIF-8-3-isocyanatopropyltrimethoxysilane (IPTMS) and N-[(3-trimethoxysilyl)propyl]diethylenetriamine (3N-APS) amine compounds. The as-prepared porous amine-based solid adsorbent (denoted as ZIF-8-IPTMS-3N-APS) possessed excellent adsorptive CO₂/N₂ and CO₂/CH₄ separation performances. As the adsorbent needs to be regenerated, this could indicate that the CO₂ adsorption separation process cannot be continuously operated. In this work, an amine-based solid adsorbent was applied during the preparation of the ZIF-8 membranes owing to the following reasons: (i) gas separation by the membrane can be operated continuously; (ii) the amino group provides a heterogeneous nucleation site for ZIF-8 to grow; and (iii) the reparation of surface defects on the macroporous substrate can be performed prior to the growth of the ZIF-8 membrane. Herein, the ZIF-8 membrane was successfully fabricated, and it possessed excellent CO₂/CH₄, CO₂/N₂, and H₂/CH₄ separation performances. The 0.6 μm ultrathin ZIF-8 membrane demonstrated a high CO₂ permeance of 4.75 × 10^-6 mol m^-2 s^-1 Pa^-1 at 35 °C and 0.1 MPa, and ideal CO₂/N₂ and CO₂/CH₄ selectivities of 4.67 and 6.02, respectively. Furthermore, at 35 °C and 0.1 MPa, the ideal H₂/CH₄ selectivity of the ZIF-8 membrane reached 31.2, and a significantly high H₂ permeance of 2.45 × 10^-5 mol m^-2 s^-1 Pa^-1.

Selective and Fast Detection of Fluoride-Contaminated Water Based on a Novel Salen-Co-MOF Chemosensor

The development of selective and fast optical sensitive chemosensors for the detection and recognition of different cations and anions in a domain is still a challenge in biological, industrial, and environmental fields. Herein, we report a novel approach for the detection and determination of fluoride ion (F-) sensing based on a salen-cobalt metal-organic framework (Co(II)-MOF). By a simple method, the Co(II)-MOF was synthesized and characterized using several tools to elucidate the structure and morphology. The photoluminescence (PL) spectrum of the Co(II)-MOF (100.0 nM/L) was examined versus different ionic species like F-, Br-, Cl-, I-, SO4 2-, and NO3 - and some cationic species like Mg2+, Ca2+, Na+, and K+. In the case of F- ions, the PL intensity of the Co(II)-MOF was scientifically enhanced with a remarkable red shift. With the increase of F- concentration, the Co(II)-MOF PL emission spectrum was also professionally enhanced. The limit of detection (LOD) for the Co(II)-MOF chemosensor was 0.24 μg/L, while the limit of quantification (LOQ) was 0.72 μg/L. Moreover, a comparison of the Co(II)-MOF optical approach with other published reports was studied, and the mechanism of interaction was also investigated. Additionally, the applicability of the current Co(II)-MOF approach in different real water samples, such as tap water, drinking water, Nile River water, and wastewater, was extended. This easy-to-use future sensor provides reliable detection of F- in everyday applications for nonexpert users, especially in remote rural areas.

Applications of MOFs as Luminescent Sensors for Environmental Pollutants

The environmental pollution has become a serious issue because the pollutants can cause permanent damage to the DNA, nervous system, and circulating system, resulting in various incurable diseases, such as organ failure, malformation, angiocardiopathy, and cancer. The effective detection of environmental pollutants is urgently needed to keep them far away from daily life. Among the reported pollutant sensors, luminescent metal-organic frameworks (LMOFs) with tunable structures have attracted remarkable attention to detect the pollutants because of their excellent selectivity, sensitivity, and recyclability. Although lots of metal-organic framework (MOF)-based luminescent sensors have been summarized and discussed in previous reviews, the detection of environmental pollutants, especially radioactive ions and heavy metal ions, still have not been systematically presented. Here, the sensing mechanisms and construction principles of luminescent MOFs are discussed, and the state-of-the-art MOF-based luminescent sensors of environmental pollutants, including pesticides, antibiotics, explosives, VOCs, toxic gas, toxic small molecules, radioactive ions, and heavy metal ions are highlighted. This comprehensive review may further guide the development of luminescent MOFs and promote their practical applications for sensing environmental pollutants.

Synthesis of fluorescent terbium-based metal-organic framework for quantitative detection of nitrite and ferric ions in water samples

Through a solvothermal reaction between the corresponding lanthanide(III) nitrate, 1,10 o-phenanthroline and pyridine 3,5-dicarboxylic acid ligands, a novel two-dimensional terbium-based metal-organic framework (Tb-MOF), named {Tb₂O_0.5(C₁₂H₈N₂)₂(C₇H₃NO₄)₃(H₂O)_2.75}_n (1) with strong fluorescence was synthesized by hydrothermal method. The single crystal structure and phase purity of the as-synthesized Tb-MOF were verified by single crystal X-ray diffraction. Subsequently, some studies on the morphology, structure, and optical properties of the compound were carried out. The results show that the synthesized Tb-MOF (1) can be used for the fluorescence sensing of nitrite and ferric ions. Simultaneously, the as-synthesized crystal structure offers good chemical stability in different environments, such as common organic solvents, solutions with a wide pH range, and aqueous solutions of metal ions. Besides, it has good chemical stability in a certain temperature range. In addition, a detection method for nitrite and iron ions was established based on the principle of fluorescence quenching of Tb-MOF by the analytical target, showing good recovery and precision. The proposed method provides a reliable new method for detecting nitrite and ferric ions concentrations in actual water samples.

The Long and Bright Path of a Lanthanide MOF: From Basics towards the Application

The development of portable, reliable, and low-cost sensors for assessing the quality of natural water sources is of high relevance in developing countries as they can serve as an intermediate solution prior to the building of permanent potable water distribution infrastructure. These sensors should be simple to operate by non-trained operators and easy to manufacture locally. Lanthanide-based metal-organic frameworks (MOFs) offer a trustable platform due to their intense emission in regions of the visible spectra and their high sensitivity to fluorides in water. Cotton was chosen as a substrate due to its high hydrophilicity which, together with the highly porous nature of the MOF, allows for shorter reaction times. The modified cotton was characterized by XRD, SEM as well as XAFS, hence probing the presence of [Tb(BTC)₆ (H₂ O)] (Tb-BTC) attachment to cotton. Changes in the emission when Tb-BTC modified cotton was exposed to water and aqueous fluoride solutions were monitored as a function of time. Crystalline phase changes were identified that correlated to structural information. Finally, the Tb-BTC modified cotton was used to build a fluoride demonstrator sensor with a linear response of up to 10 mg L^-1 and a limit of detection of 0.8 mg L^-1 , making it suitable for drinking water analysis under international regulations.

Guest-Tunable Excited States in a Cyanide-Bridged Luminescent Coordination Polymer

The excited-state energy was tuned successfully by guest molecules in a cyanide-bridged luminescent coordination polymer (CP). Methanol or ethanol vapor reversibly and significantly changed the luminescent color of the CP between green and yellow (Δλ_em = 32 nm). These vapors did not significantly affect the environment around the luminophore in the ground state of the CP, whereas they modulated the excited states for the resulting bathochromic shift. The time-resolved photoluminescent spectra of the CP systems showed that solvent adsorption enhanced the energetic relaxation in the excited states. Furthermore, time-resolved infrared spectroscopy indicated that cyanide bridging in the CP became more flexible in the excited states than that in the ground state, highlighting the sensitivity of the excited states to external stimuli, such as the guest vapor. Overall, guest-tunable excited states will allow the more straightforward design of sensing materials by characterizing the transient excited states.

Three Silver(I) Coordination Polymers Based on Pyridyl Ligands and Auxiliary Carboxylic Ligands: Luminescence and Efficient Sensing Properties

Easily producible sensors for harmful industrial waste compounds are of significant interest for both human health and the environment. Three novel coordination polymers, [Ag(μ-aca)(μ₄-bztpy)_1/2] (1), [Ag(μ-bza)(μ-bpa)] (2), and [Ag₂(μ-aca)₂(μ-bpa)₂]·EtOH·2H₂O (3), were assembled in this study by reactions using Ag⁺ as a node with the pyridyl ligand 1,2,4,5-tetrakis(4-pyridyl)benzene (bztpy) or 9,10-bis(4-pyridyl)anthracene (bpa) and an auxiliary chelating carboxylic ligand. Single-crystal X-ray structural analyses revealed that compound 1 has a 3D framework consisting of 1D [Ag(aca)]_∞ chains and bztpy linkers, while 2 and 3 have 2D layered structures consisting of binuclear Ag-carboxylate units and bpa linkers, respectively. Topological studies revealed that 1 has a bbf topology, while 2 and 3 are 2D [4,4] rhombic grids. The compounds were further characterized by powder X-ray diffraction, IR, elemental analysis, thermogravimetric analysis, and a luminescence study. The solids of 1-3 exhibited intense photoluminescent emission with λ_em^max at ca. 493, 472, and 500 nm, respectively. Remarkably, due to their excellent framework stability, 1 and 2 can act as multiresponsive luminescent sensors for nitrobenzene, Fe³⁺, and Cr₂O₇^2- with a high selectivity and sensitivity ascribed to their quenching effect.