Hydroxynaphthyridine-derived group III metal chelates: wide band gap and deep blue analogues of green Alq3 (tris(8-hydroxyquinolate)aluminum) and their versatile applications for organic light-emitting diodes

Highly emissive 4-carbazole-appended salen-indium complex: the effect of strong donor-acceptor interaction

Herein, we report our findings on 4-carbazole (CBZ)-appended salen-based indium complexes, CBZIn1 and CBZIn2, which feature diimine bridges exhibiting different electron-accepting properties. Notably, CBZIn2 exhibited a significantly higher photoluminescence quantum efficiency (PLQY, ΦPL) in toluene than CBZIn1, with a value over 15 times greater (ΦPL = 57.7% for CBZIn2; ΦPL = 3.7% for CBZIn1). In particular, in the rigid state of THF at 77 K, CBZIn2 exhibited a near-unity PLQY of 98.2%. Even in the PMMA film, CBZIn2 maintained a high level of PLQY (ΦPL = 70.2%). These results can be attributed to the highly efficient radiative decay process based on intramolecular charge-transfer (ICT) transition between the moderately twisted CBZ, characterized by its conformational rigidity and the 1,2-dicyanoethylene-bridged salen, which exhibits a strong electron-accepting ability. Furthermore, these findings are supported by theoretical calculations.

Advances in the Chemistry of 2,4,6-Tri(thiophen-2-yl)-1,3,5-triazine

Heterocyclic systems are now considered to be an integral part of material chemistry. Thiophene, selenophene, furan, pyrrole, carbazole, triazine and others are some such examples worth mentioning. 2,4,6-Tri(thiophen-2-yl)-1,3,5-triazine is a C3h -symmetric system with thiophene as the donor unit and s-triazine as the acceptor unit. This review gives an insight into the advances made in the thienyl-triazine chemistry over the past two to three decades. The synthetic pathways for arriving at this system and all its important derivatives are provided. The major focus is on the materials synthesized using the thienyl-triazine system, including star molecules, linear and hyperbranched polymers, porous materials and their diverse applications. This review will play a catalytic role for new dimensions to be explored in thienyl-triazine chemistry.

NHC-BIAN-Cu(I)-Catalyzed Friedländer-Type Annulation of 2-Amino-3-(per)fluoroacetylpyridines with Alkynes on Water

The direct catalytic alkynylation/dehydrative cyclization of 2-amino-3-trifluoroacetyl-pyridines on water was developed for the efficient synthesis of a broad range of fluorinated 1,8-naphthyridines from terminal alkynes. A novel N-heterocyclic carbene (NHC) ligand system that combines a π-extended acenaphthylene backbone with sterically bulky pentiptycene pendant groups was successfully utilized in a copper- or silver-mediated cyclization. Computational analysis of the reaction pathway supports our explanation of the different experimental conversions and yields for the set of copper and silver catalysts. The impact of steric hindrance at the metal center and the flexibility of substituents on the imidazole ring of the NHC on catalytic performance are also discussed.

Highly red-emissive salen–indium complexes: impact of 4-amino-substitution on the photophysical properties

4-NR2-appended salen–indium complexes were prepared via a one-pot synthetic pathway. The complexes exhibited narrow-bandwidth red emissions with high photoluminescence quantum yields that are the highest among the reported salen-based luminophores.

A methyl-shield strategy enables efficient blue thermally activated delayed fluorescence hosts for high-performance fluorescent OLEDs

Here, we report a novel methyl-shield strategy to design ideal TADF hosts for the improvement of the performance of TSF-OLEDs. The methyl group on the xanthone acceptor acts like a shield to protect the luminance center from close intermolecular hydrogen bonding with adjacent molecules, thus alleviating exciton quenching, and meanwhile the small size of the methyl group almost does not disturb the π-π stacking between acceptors, thus maintaining fast electron-transport pathways. dMeACRXTO having two methyl shields is exploited as the host to achieve a record-high EQE of 32.3%, which represents the first report of an EQE above 30% in TSF-OLEDs.

Enantiopure Calcium Iminophosphonamide Complexes: Synthesis, Photoluminescence, and Catalysis

The synthesis of calcium complexes ligated by three different chiral iminophosphonamide ligands, L-H (L=[Ph₂ P{N(R)CH(CH₃ )Ph}₂ ]), L'-H (L'=[Ph₂ P{NDipp}{N(R)CH(CH₃ )Ph}]), (Dipp=2,6-ⁱ Pr₂ C₆ H₃ ), and L''-H (L''=[Ph₂ P{N(R)CH(CH₃ )naph}₂ ]), (naph=naphthyl) is presented. The resulting structures [L₂ Ca], [L'₂ Ca], and [L''₂ Ca] represent the first examples of enantiopure homoleptic calcium complexes based on this type of ligands. The calcium complexes show blue-green photoluminescence (PL) in the solid state, which is especially bright at low temperatures. Whereas the emission of [L''₂ Ca] is assigned to the fluorescence of naphthyl groups, the PL of [L₂ Ca] and [L'₂ Ca] is contributed by long-lived phosphorescence and thermally activated delayed fluorescence (TADF), with a strong variation of the PL lifetimes over the temperature range of 5-295 K. Furthermore, an excellent catalytic activity was found for these complexes in hydroboration of ketones at room temperature, although no enantioselectivity was achieved.

Synthesis and Photophysical Properties of a Series of Dimeric Indium Quinolinates

A novel class of quinolinol-based dimeric indium complexes (1-6) was synthesized and characterized using ¹H and ¹³C(¹H) NMR spectroscopy and elemental analysis. Compounds 1-6 exhibited typical low-energy absorption bands assignable to quinolinol-centered π-π* charge transfer (CT) transition. The emission spectra of 1-6 exhibited slight bathochromic shifts with increasing solvent polarity (p-xylene < tetrahydrofuran (THF) < dichloromethane (DCM)). The emission bands also showed a gradual redshift, with an increase in the electron-donating effect of substituents at the C5 position of the quinoline groups. The absolute emission quantum yields (Φ_PL) of compounds 1 (11.2% in THF and 17.2% in film) and 4 (17.8% in THF and 36.2% in film) with methyl substituents at the C5 position of the quinoline moieties were higher than those of the indium complexes with other substituents.

Synthetic Strategies, Reactivity and Applications of 1,5-Naphthyridines

This review covers the synthesis and reactivity of 1,5-naphthyridine derivatives published in the last 18 years. These heterocycles present a significant importance in the field of medicinal chemistry because many of them exhibit a great variety of biological activities. First, the published strategies related to the synthesis of 1,5-naphthyridines are presented followed by the reactivity of these compounds with electrophilic or nucleophilic reagents, in oxidations, reductions, cross-coupling reactions, modification of side chains or formation of metal complexes. Finally, some properties and applications of these heterocycles studied during this period are examined.

Absorption and emission properties of 5-phenyl tris(8-hydroxyquinolinato) M(III) complexes (M = Al, Ga, In) and correlations with molecular electrostatic potential

Substituent effect for a series of 5-phenyl tris(8-hydroxyquinolinato) M(III) complexes (Mq3) of aluminum, gallium, and indium are investigated using density functional theory (DFT) for the ground state properties and the time-dependent version of DFT (TDDFT) for their absorption and emission properties. A comparison between the ground state energy of mer and fac isomers of all the complexes revealed that the mer configuration is always more stable than fac. The substituent effect is significantly reflected at the fluorescence maximum (λ_F ) values whereas the effect is moderate at the absorption maximum (λ_abs ) values. The molecular electrostatic potential (MESP) at the metal center (V_M ) and the most electron rich region indicated by MESP minimum (V_min ), located at the oxygen of phenoxide ring exhibit excellent correlations with the λ_F and Stokes shift (λ_F -λ_abs ) values. The study suggests the use of Stokes shift as an experimental quantity to measure the excited state substituent effect while the V_min or V_M emerge as theoretical quantities to measure the same.

Evolution of pure hydrocarbon hosts: simpler structure, higher performance and universal application in RGB phosphorescent organic light-emitting diodes

In the field of phosphorescent organic light-emitting diodes (PhOLEDs), designing high-efficiency universal host materials for red, green and blue (RGB) phosphors has been quite a challenge. To date, most of the high-efficiency universal hosts reported incorporate heteroatoms, which have a crucial role in the device performance. However, the introduction of different kinds of heterocycles increases the design complexity and cost of the target material and also creates potential instability in the device performance. In this work, we show that pure aromatic hydrocarbon hosts designed with the 9,9′-spirobifluorene scaffold are high-efficiency and versatile hosts for PhOLEDs. With external quantum efficiencies of 27.3%, 26.0% and 27.1% for RGB PhOLEDs respectively, this work not only reports the first examples of high-efficiency pure hydrocarbon materials used as hosts in RGB PhOLEDs but also the highest performance reported to date for a universal host (including heteroatom-based hosts). This work shows that the PHC design strategy is promising for the future development of the OLED industry as a high-performance and low-cost option.

In this work, we propose pure hydrocarbon materials as universal hosts for high-efficiency red, green and blue phosphorescent organic light-emitting diodes.

Function-driven engineering of 1D carbon nanotubes and 0D carbon dots: mechanism, properties and applications

Metal-free carbonaceous nanomaterials have witnessed a renaissance of interest due to the surge in the realm of nanotechnology. Among myriads of carbon-based nanostructures with versatile dimensionality, one-dimensional (1D) carbon nanotubes (CNTs) and zero-dimensional (0D) carbon dots (CDs) have grown into a research frontier in the past few decades. With extraordinary mechanical, thermal, electrical and optical properties, CNTs are utilized in transparent displays, quantum wires, field emission transistors, aerospace materials, etc. Although CNTs possess diverse characteristics, their most attractive property is their unique photoluminescence. On the other hand, another growing family of carbonaceous nanomaterials, which is CDs, has drawn much research attention due to its cost-effectiveness, low toxicity, environmental friendliness, fluorescence, luminescence and simplicity to be synthesized and functionalized with surface passivation. Benefiting from these unprecedented properties, CDs have been widely employed in biosensing, bioimaging, nanomedicine, and catalysis. Herein, we have systematically presented the fascinating properties, preparation methods and multitudinous applications of CNTs and CDs (including graphene quantum dots). We will discuss how CNTs and CDs have emerged as auspicious nanomaterials for potential applications, especially in electronics, sensors, bioimaging, wearable devices, batteries, supercapacitors, catalysis and light-emitting diodes (LEDs). Last but not least, this review is concluded with a summary, outlook and invigorating perspectives for future research horizons in this emerging platform of carbonaceous nanomaterials.

Intensely Photoluminescent Diamidophosphines of the Alkaline-Earth Metals, Aluminum, and Zinc

The positively charged and weakly polarizable s-block metals commonly do not usually have phosphine ligands in molecular complexes. Herein, we report mono- and dinuclear small diamidophosphine complexes of the alkaline-earth metals Mg, Ca, and Sr, which were prepared from simple precursors and a phosphine-functionalized diamine ligand N,N-bis(2-(diphenyl-phosphino)phenyl)ethane-1,2-diamine (PNHNHP). The alkaline-earth metal based complexes [(PNNP)Mg]₂ and [(PNNP)M(thf)₃ ] (M=Ca, Sr), exhibit unusual coordination spheres and show bright fluorescence, both in the solid state and in solution. For comparison, the even stronger luminescent Al and Zn complexes [(PNNP)Zn]₂ and [(PNNP)AlCl] were prepared. Emission lifetimes in the nanosecond range and high photoluminescence quantum yields up to 93 % are observed at room temperature.

Salen-indium/triarylborane triads: synthesis and ratiometric emission-colour changes by fluoride ion binding

Salen-based indium triads, [{(3-tBu)2-(5-Mes2B)2-salen}In-Me] (1) and [{(3-tBu)2-(5-Mes2Bphenyl)2-salen}In-Me] (2), bearing triarylborane (TAB) units were prepared and fully characterised by NMR spectroscopy and elemental analysis. The major absorption bands of 1 and 2 appeared in the region centred at 347 nm and 374 nm, respectively, and the intense emission spectra were observed in the sky blue (λem = 491 nm for 1) and bluish-green (λem = 498 nm for 2) regions, respectively. The solvatochromism effects in various organic solvents and computational calculation results strongly suggested that these absorption and emission features are mainly attributed to intramolecular charge transfer (ICT) transitions between the salen ligand moieties and the TAB units. Furthermore, UV-vis and photoluminescence (PL) titration experiments by the addition of fluoride anions demonstrated ratiometric quenching patterns in both the absorption and emission spectra, indicating that binding of the fluoride anion to the boron centres interrupts these ICT transitions in each compound. Interestingly, both triads exhibited a gradual red-shifted response in each emission spectrum upon the addition of the fluoride anions, resulting in a dramatic colour-change to yellow. The computational calculation results of the S1 states revealed that these emission-colour change properties arise from the elevation of HOMO levels, which are mainly localised on the TAB moieties, resulting from the fluoride anion binding to the borane centres.

Synthesis and properties of blue luminescent bipolar materials constructed with carbazole and anthracene units with 4-cyanophenyl substitute at the 9-position of the carbazole unit

With carbazole and p-cyanobromobenzene as raw materials, 4-(3,6-di (anthracen-9-yl)-9H-carbazol-9-yl)benzonitrile (DACB) and 4-(3,6-bis(anthracene -9-ylethynyl)-9H-carbazol-9-yl)benzonitrile (BACB) were synthesized through the Suzuki coupling reaction and the Sonogashira coupling reaction, respectively. These structures were characterized using ¹ H nuclear magnetic resonance (NMR), elemental analysis and mass spectrometry. Their thermal properties, ultraviolet-visible (UV-vis) absorption, fluorescence emission, fluorescence quantum yields and electrochemical properties were also investigated systematically. In addition, a electroluminescence (EL) device was made with BACB as the emitting layer and performance of the EL device was studied. Results showed that: (1) the temperature points with 5% and 10% of DACB weight loss were 443°C and 461°C, respectively, and were 475°C and 506°C with BACB weight loss of 5% and 10%, respectively. When the temperature was 50-300°C, no significantly thermal transition was observed which suggested that they had excellent thermal stability. (2) DACB and BACB had single emission peaks at 415 nm, and 479 nm with fluorescence quantum yields of 0.61 and 0.87, respectively, indicating that both compounds could emit strong blue light. (3) According to electrochemical measurement on BACB and DACB, their gaps were 3.07 eV and 2.76 eV, respectively, which further showed that these two compounds were very stable and acted as efficient blue light materials. (4) The turn-on voltage of the device was 5 V, and the device emitted dark blue light with Commission Internationale de L'Eclairage (CIE) coordinates of (0.157, 0.079).

Si(bzimpy)2 – a hexacoordinate silicon pincer complex for electron transport and electroluminescence

We demonstrate the feasibility of hexacoordinate silicon complexes with dianionic pincer ligands as electron transport and electroluminescent components of organic electronic devices.

Aluminum Complexes of N2O23- Formazanate Ligands Supported by Phosphine Oxide Donors

The synthesis and characterization of a new family of phosphine oxide supported aluminum formazanate complexes (7a,b, 8a, 9a) are reported. X-ray diffraction studies showed that the aluminum atoms in the complexes adopt an octahedral geometry in the solid state. The equatorial positions are occupied by an N₂O₂^3- formazanate ligand, and the axial positions are occupied by L-type phosphine oxide donors. UV-vis absorption spectroscopy revealed that the complexes were strongly absorbing (ε ≈ 30000 M^-1 cm^-1) between 500 and 700 nm. The absorption maxima in this region were simulated using time-dependent density functional theory. With the exception of 3-cyano-substituted complex 7b, which showed maximum luminescence intensity in the presence of excess phosphine oxide, the title complexes are nonemissive in solution and the solid state. The electrochemical properties of the complexes were probed using cyclic voltammetry. Each complex underwent sequential one-electron oxidations in potential ranges of -0.12 to 0.29 V and 0.62 to 0.97 V, relative to the ferrocene/ferrocenium redox couple. Electrochemical reduction events were observed at potentials between -1.34 and -1.75 V. In combination with tri-n-propylamine as a coreactant, complex 7b acted as an electrochemiluminescence emitter with a maximum electrochemiluminescence intensity at a wavelength of 735 nm, red-shifted relative to the photoluminescence maximum of the same compound.

Zn-, Mg-, and Li-TMP Bases for the Successive Regioselective Metalations of the 1,5-Naphthyridine Scaffold (TMP=2,2,6,6-Tetramethylpiperidyl)

A set of successive regioselective metalations and functionalizations of the 1,5-naphthyridine scaffold are described. A combination of Zn-, Mg-, and Li-TMP (TMP=2,2,6,6-tetramethylpiperidyl) bases and the presence or absence of a Lewis acid (BF₃ ⋅OEt₂ ) allows the introduction of up to three substituents to the 1,5-naphthyridine core. Also, a novel "halogen dance" reaction was discovered upon metalation of an 8-iodo-2,4-trifunctionalized 1,5-naphthyridine allowing a fourth regioselective functionalization. Additionally, reactions leading to key 1,5-naphthyridines for the preparation of OLED materials and a potential antibacterial agent were performed.

Synthesis and Dual-Emission Feature of Salen-Al/Triarylborane Dyads

Novel salen-Al/triarylborane dyad complexes were prepared and characterized with their corresponding mononuclear compounds. The UV-vis and photoluminescence experiments for dyads exhibited photoinduced energy transfer from borane to the salen-Al moiety in an intramolecular manner. Theoretical calculation and fluoride titration results further supported these intramolecular energy-transfer features.

Design of highly efficient RGB top-emitting organic light-emitting diodes using finite element method simulations

In this paper, we present finite element method simulations of top-emitting organic light-emitting diodes for designing optimized red, green, and blue full-color device structures. The OLED structures in the simulation are used to evaluate the device parameters, such as the outcoupling efficiency, electroluminescence spectra, and angular emission characteristics on organic layers with varying thickness and different cathodes. The numerical study also extracts these parameters for nano-structured devices. By observing the agreement between the simulated and measured data precisely, our simulations show capability of predicting the fabricated device results.

Bio-recognitive photonics of a DNA-guided organic semiconductor

Incorporation of duplex DNA with higher molecular weights has attracted attention for a new opportunity towards a better organic light-emitting diode (OLED) capability. However, biological recognition by OLED materials is yet to be addressed. In this study, specific oligomeric DNA–DNA recognition is successfully achieved by tri (8-hydroxyquinoline) aluminium (Alq₃), an organic semiconductor. Alq₃ rods crystallized with guidance from single-strand DNA molecules show, strikingly, a unique distribution of the DNA molecules with a shape of an ‘inverted' hourglass. The crystal's luminescent intensity is enhanced by 1.6-fold upon recognition of the perfect-matched target DNA sequence, but not in the case of a single-base mismatched one. The DNA–DNA recognition forming double-helix structure is identified to occur only in the rod's outer periphery. This study opens up new opportunities of Alq₃, one of the most widely used OLED materials, enabling biological recognition.

BioLEDs is an emerging group of light-emitting diodes that use duplex-strand DNA to enhance luminescence intensity. Here, Back et al. show that only the specific binding between a pair of single-strand DNA can trigger the enhancement, which potentially makes BioLEDs an easy platform for DNA recognition.

An alcohol-soluble and ion-free electron transporting material functionalized with phosphonate groups for solution-processed multilayer PLEDs

An alcohol-soluble and ion-free small molecule (TPPO) functionalized with phosphonate groups has been developed as the electron transporting material for solution-processed multilayer PLEDs.

Push-pull effect on the geometrical, optical and charge transfer properties of disubstituted derivatives of mer-tris(4-hydroxy-1,5-naphthyridinato) aluminum (mer-AlND3)

To design innovative and novel optical materials with high mobility, two kinds of disubstituted derivatives for mer-tris(4-hydroxy-1,5-naphthyridinato) aluminum (mer-AlND3) with push (EDG)–pull (EWG) substituents have been designed. The structures of mer-tris(8-EDG-2-EWG-4-hydroxy-1,5-naphthyridinato) aluminum (type I) and mer-tris(8-EWG-2-EDG-4-hydroxy-1,5-naphthyridinato) aluminum (type II) in the ground and first excited states have been optimized at the B3LYP/6-31G(D) and CIS/6-31G(D) level of theory, respectively. It can be seen from frontier molecular orbitals analysis, in all these complexes, the highest occupied molecular orbital (HOMO) is localized on the pyridine-4-ol ring of A-ligand while lowest unoccupied molecular orbital (LUMO) is on the pyridyl ring of B-ligand in ground state irrespective of electron donor/acceptor substitution present on the ligands similar to that of mer-tris(8-hydroxyquinoline) aluminum (mer-Alq3) and parent mer-AlND3.The absorption and emission wavelengths have been evaluated at the TD-PBE0/6-31G(D) level and it can be see that all the type I derivatives show blue shift while most of the type II derivatives show red shift compared to mer-AlND3. All the disubstituted complexes have showed hypsochromic shifts in both the absorption and emission spectra when compared with the calculated absorption and emission spectra respectively of mer-Alq3. It can be seen that the reorganization energies of some of the disubstituted derivatives are comparable with mer-Alq3 and these derivatives might be good candidates for emitting materials in OLED.

Bis(2-(benzo[d]thiazol-2-yl)-5-fluorophenolate)beryllium: a high-performance electron transport material for phosphorescent organic light-emitting devices

A beryllium complex with a low-lying LUMO level, high triplet energy and high electron mobility served as an excellent electron transport material for green, yellow and red phosphorescent OLEDs.

Efficient Red-Emitting Platinum Complex with Long Operational Stability

A tetradentate cyclometalated Pt(II) complex, PtN3N-ptb, was developed as an emissive dopant for stable and efficient red phosphorescent OLEDs. Devices employing PtN3N-ptb in electrochemically stable device architectures achieved long operational lifetimes with estimated LT97, of over 600 h at luminances of 1000 cd/m(2). Such long operational lifetimes were achieved utilizing only literature reported host, transporting and blocking materials with known molecular structures. Additionally, a thorough study of the effects of various host and transport materials on the efficiency, turn on voltage, and stability of the devices was carried out. Ultimately, maximum forward viewing EQEs as high as 21.5% were achieved, demonstrating that Pt(II) complexes can act as stable and efficient dopants with operational lifetimes comparable or superior to those of the best literature-reported Ir(III) complexes.

Emission behaviors of unsymmetrical 1,3-diaryl-β-diketones: a model perfectly disclosing the effect of molecular conformation on luminescence of organic solids

A series of unsymmetrical 1,3-diaryl-β-diketones 1–6 displaying molecular conformation-dependent fluorescence quantum yields have been synthesized. Crystals with planar molecular conformation such as 1, 2, 3 and 4 are highly fluorescent (φ_f: 39–53%), and the one holding slightly twisted conformation (5) is moderately luminescent (φ_f = 17%), while crystal 6 possessing heavily bent structure is completely nonluminous (φ_f ~ 0). The distinct fluorescence efficiencies are ascribed to their different molecular conformations, since all the crystals hold the same crystal system, space group and crystal packing structures. Additionally, the fluorescent crystals 1–5 display low threshold amplified spontaneous emission (ASE) with small full widths at half-maximum (FWHM: 3–7 nm), indicating their potential as candidates for organic crystal lasing devices.

Elucidating the crucial role of hole injection layer in degradation of organic light-emitting diodes

Although the luminous efficiency has been significantly improved in multilayered organic light-emitting diodes (OLEDs), understanding the major factors that influence degradation of OLEDs remains a major challenge due to their complex device structure. In this regard, we elucidate the crucial role of hole injection layer (HIL) in degradation of OLEDs by using systematically controlled hole injection interfaces. To analyze charge injection dependent degradation mechanism of OLEDs, we fabricate multilayered small-molecule OLEDs with molecularly controlled HILs. Although a reduced hole injection energy barrier greatly improves both a luminous efficiency and an operational lifetime (>10 times) of the OLEDs at the same time, large hole injection energy barrier increasingly aggravates its charge injection and transport during device operation. By using various kinds of nondestructive analyses at gradual stages of degradation, we demonstrate that accumulated charges at interfaces due to inefficient charge injection accelerates rate of device degradation.

Anion-dependent assembly of Dy complexes: structures and magnetic behaviors

The in situ reaction of 2-aldehyde-8-hydroxyquinoline, histamine and LnX₃·6H₂O (X⁻ = OAc⁻, NO₃⁻ and ClO₄⁻) affords three distinct species of eight lanthanide complexes.

Efficient hybrid white organic light-emitting diodes with extremely long lifetime: the effect of n-type interlayer

The effect of n-type interlayer in hybrid white organic light-emitting diodes (WOLEDs) has been systematically investigated by using various n-type materials. A new finding, that the triplet energy rather than electron mobility or hole-blocking ability of interlayer plays a more positive role in the performance of hybrid WOLEDs, is demonstrated. Based on the new finding, a more efficient n-type interlayer bis[2-(2-hydroxyphenyl)-pyridine] beryllium has been employed to realize a high-performance hybrid WOLED. The resulting device (without n-doping technology) exhibits low voltages (i.e., 2.8 V for 1 cd/m², 3.9 V for 100 cd/m²) and low efficiency roll-off (i.e., 11.5 cd/A at 100 cd/m² and 11.2 cd/A at 1000 cd/m²). At the display-relevant luminance of 100 cd/m², a total power efficiency of 16.0 lm/W, a color rendering index of 73 and an extremely long lifetime of 12596265 h are obtained. Such superior results not only comprehensively indicate that the n-type materials are effective interlayers to develop high-performance hybrid WOLEDs but also demonstrate a significant step towards real commercialization in WOLEDs.

Synthesis, characterization and fluorescent properties of 5-(aryliminomethyl)quinaldine-8-ol derivatives and their trinuclear zinc complexes

A series of 5-[1-(arylimino)methyl]quinaldine-8-ol derivatives L1-L5 and their trinuclear zinc(II) complexes (C1-C5) were synthesized. The compounds L1-L5 were fully characterized by the FT-IR spectra, NMR measurement and elemental analysis, meanwhile the zinc complexes C1-C5 were characterized by the FT-IR spectra and elemental analysis as well as the single crystal X-ray diffraction of a representative complex C3, which revealed a trinuclear zinc complex bearing six organic ligands. The fluorescent properties of both organic compounds and the zinc complexes have been carefully investigated by the UV-Vis absorption in various solvents, indicating the significant influences of the solvents and also double exponential decays.

Recent progress in metal–organic complexes for optoelectronic applications

This critical review reports recent advances in the development of metal–organic complexes for optoelectronic applications.