Synthesis, Radiolabeling, and Bio-imaging of High-Generation Polyester Dendrimers

Dendrimer-Mediated Molecular Sieving on Avidin

Decoration of proteins and enzymes with well-defined polymeric structures allows precise decoration of protein surfaces, enabling controlled modulation of activity. Here, the impact of dendronization on the interaction between avidin and biotin was investigated. A series of generation 3-7 bis(2,2-hydroxymethyl)propionic acid (bis-MPA) dendrons were coupled to either biotin or avidin to yield a library of dendronized avidin and biotin structures. The thermodynamics of binding each biotinylated generation to a library of avidin conjugates was probed with isothermal titration calorimetry (ITC). Dissociation constants of high-generation biotin-dendrons (G5 and G6) with higher-generation avidin-dendron conjugates (Av-G6) increased from ∼10-15 M (for the native structures) to ∼10-6 M, and binding was found to be weaker than that of the Avidin-HABA complex. Avidin-G5 and Avidin-G6 were highly size-selective for biotinylated ligands; both prevented the binding of aprotinin (6.9 kDa), bovine serum albumin (BSA), and PEG3400 while forming fractional complexes with smaller biotinylated dendrons.

Advancing Antiamyloidogenic Activity by Fine-Tuning Macromolecular Topology

Amyloid β peptide can aggregate into thin β-sheet fibrils or plaques deposited on the extracellular matrix, which is the hallmark of Alzheimer's disease. Multifunctional macromolecular structures play an important role in inhibiting the aggregate formation of amyloidogenic materials and thus are promising candidates with antiamyloidogenic characteristics for the development of next-generation therapeutics. In this study, we evaluate how small differences in the dendritic topology of these structures influence their antiamyloidogenic activity by the comparison of "perfectly dendritic" and "pseudodendritic" macromolecules, both decorated with mannose units. Their compactness, the position of surface units, and the size of glyco-architectures influence their antiamyloidogenic activity against Aβ 40, a major component of amyloid plaques. For the advanced analysis of the aggregation of the Aβ peptide, we introduce asymmetric flow field flow fractionation as a suitable method for the quantification of large and delicate structures. This alternative method focuses on the quantification of complex aggregates of Aβ 40 and glycodendrimer/glyco-pseudodendrimer over different time intervals of incubation, showing a good correlation to ThT assay and CD spectroscopy results. Kinetic studies of the second-generation glyco-pseudodendrimer revealed maximum inhibition of Aβ 40 aggregates, verified with atomic force microscopy. The second-generation glyco-pseudodendrimer shows the best antiamyloidogenic properties confirming that macromolecular conformation in combination with optimal functional group distribution is the key to its performance. These molecular properties were validated and confirmed by molecular dynamics simulation.

Nanoparticles labeled with gamma-emitting radioisotopes: an attractive approach for in vivo tracking using SPECT imaging

Providing accurate molecular imaging of the body and biological process is critical for diagnosing disease and personalizing treatment with the minimum side effects. Recently, diagnostic radiopharmaceuticals have gained more attention in precise molecular imaging due to their high sensitivity and appropriate tissue penetration depth. The fate of these radiopharmaceuticals throughout the body can be traced using nuclear imaging systems, including single-photon emission computed tomography (SPECT) and positron emission tomography (PET) modalities. In this regard, nanoparticles are attractive platforms for delivering radionuclides into targets because they can directly interfere with the cell membranes and subcellular organelles. Moreover, applying radiolabeled nanomaterials can decrease their toxicity concerns because radiopharmaceuticals are usually administrated at low doses. Therefore, incorporating gamma-emitting radionuclides into nanomaterials can provide imaging probes with valuable additional properties compared to the other carriers. Herein, we aim to review (1) the gamma-emitting radionuclides used for labeling different nanomaterials, (2) the approaches and conditions adopted for their radiolabeling, and (3) their application. This study can help researchers to compare different radiolabeling methods in terms of stability and efficiency and choose the best way for each nanosystem.

Dendrimer-Mediated Delivery of Anticancer Drugs for Colon Cancer Treatment

The third most common cancer worldwide is colon cancer (CC). Every year, there more cases are reported, yet there are not enough effective treatments. This emphasizes the need for new drug delivery strategies to increase the success rate and reduce side effects. Recently, a lot of trials have been done for developing natural and synthetic medicines for CC, among which the nanoparticle-based approach is the most trending. Dendrimers are one of the most utilized nanomaterials that are accessible and offer several benefits in the chemotherapy-based treatment of CC by improving the stability, solubility, and bioavailability of drugs. They are highly branched polymers, making it simple to conjugate and encapsulate medicines. Dendrimers have nanoscale features that enable the differentiation of inherent metabolic disparities between cancer cells and healthy cells, enabling the passive targeting of CC. Moreover, dendrimer surfaces can be easily functionalized to improve the specificity and enable active targeting of colon cancer. Therefore, dendrimers can be explored as smart nanocarriers for CC chemotherapy.

Magnetic triazine-based dendrimer as a versatile nanocarrier for efficient antiviral drugs delivery

Nanoscale engineering is an efficient method for the treatment of multiple infectious diseases. Due to the controllable functionalities, surface properties, and internal cavities, dendrimer-based nanoparticles represent high performance in drug delivery, making their application attractive in pharmaceutical and medicinal chemistry. In this study, a dendritic nanostructure (Fe3O4@SiO2@TAD-G3) was designed and fabricated by grafting a triazine-based dendrimer on a magnetic nanomaterial. The structure of synthesized hybrid nanostructure was characterized by Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), energy-dispersive X-ray (EDX) spectroscopy, elemental mapping, scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and vibrating sample magnetometry (VSM). The prepared nanostructure (Fe3O4@SiO2@TAD-G3) combines the unique properties of magnetic nanoparticles and a hyperbranched dendrimer for biomedical applications. Its dual nature and highly exposed active sites, could make the transportation of drugs to targeted sites of interest through the magnetic field. A study was conducted on model drugs loading (Favipiravir and Zidovudine) and in vitro release behaviour of Fe3O4@SiO2@TAD-G3, which was monitored by ultraviolet spectroscopy. The dendritic nanostructure exhibited high drug-loading capacity for Favipiravir (63.2%) and Zidovudine (76.5%). About (90.8% and 80.2%) and (95.5% and 83.4%) of loaded Favipiravir and Zidovudine were released from Fe3O4@SiO2@TAD-G3 at pH 1.5 and 6.8 respectively, within 600 min and at 37 °C. The initial fast release attributed to the drug molecules on the surface of nanostructure while the drugs incorporated deeply into the pores of the Fe3O4@SiO2@TAD-G3 released with a delay. We proposed that Fe3O4@SiO2@TAD-G3 could be tested as an effective carrier in the targeted (cellular or tissue) delivery of drugs. We think that the prepared nanostructure will not deposit in the liver and lungs due to the small size of the nanoparticles.

Click synthesis of novel dendronized curcumin and analogs. Strengthening of physicochemical properties toward biological applications

Curcumin and its analogs, chalcones, and C5-monocarbonyl are molecules of great therapeutic potential, but their poor stability and hydrophobicity have hampered their extensive use in clinical trials. Therefore, significant efforts have been made in materials science to improve their physicochemical properties. In this study, we propose dendronization as a synthetic strategy to strengthen some physicochemical properties such as solubility and stability of curcumin and analogs, taking advantage of the click chemistry (CuAAC) to attach second-generation polyester dendrons to the unsaturated cores. The dendronization, with the subsequent formation of aromatic triazole groups as linkers, not only modified the solubility and stability of the molecular systems but also favored the diketo tautomeric form of curcumin, as demonstrated spectroscopically. This result is significant since the diketo tautomer, which preserves the antioxidant properties of curcumin, is the most biologically active form. The hydrophobic/hydrophilic balance, achieved after dendronization, allowed the solubilization of the chromophoric molecules in buffered solutions at relevant pH values (7.4 and 6.4). Furthermore, the stability of all molecules was also upgraded since UV-vis absorption spectra did not exhibit modified profiles after 7 days at physiologic pH. From photochemical stability experiments irradiating at 415 nm, the dendritic derivatives containing triazole linkers were more susceptible to being degraded. All derivatives exhibited emission properties according to the length of each conjugate fragment. Fluorescence experiments evidenced the role of dendrons in preventing emission quenching by aggregation and exhibited differentiated emission behavior depending on the linker type (triazole or ester) between the chromophoric core and the polyester dendrons.

Dendronization: A practical strategy to improve the performance of molecular systems used in biomedical applications

Nanomedicine is an emerging area that largely influences the efficacy of various therapies through the rational design of new materials exhibiting more targeted behavior. The synthetic effort, the amount of used material, and the cost are critical parameters to bear in mind if the production of the designed material is intended to be scaled for their widespread use. Even though materials science offers diverse options for different types of therapies, it is a difficult task to meet all the parameters mentioned above. The dendronization appears as an insightful approach to incorporate all the known benefits of the dendritic architecture by the attachment of dendrons to therapeutic agents, but in a much more affordable manner in terms of synthetic effort, amount of material, and cost. As will be presented, the most common dendrons used for biomedical applications are polyamide, polyester, carbosilane, polyether, and glycol-type, which are bonded to biological active molecules (BAMs), or molecular nanoplatforms (MPs) by hydrolysable bonds. Also relevant is the fact that the incorporation of dendrons not larger than third generation (G3) is sufficient to improve essential properties of these molecular systems, such as aqueous solubility, stability, and cellular internalization, among others. The type of dendron and its location on the BAMs or MPs, similar to placing a Lego piece on a model, will be decisive for obtaining the desired properties.

PAMAM and polyester dendrimers as favipiravir nanocarriers: a comparative study using DFT method

The electronic sensitivity and reactivity of polyamidoamine (PAMAM) and polyester dendrimers toward favipiravir (T705) were inspected using density functional theory method. The T705 drug is adsorbed on the surface of PAMAM and polyester dendrimers with the binding energy of -27.26 and -26.80 kcal mol-1, respectively, in the solvent phase. The energy gap of PAMAM and polyester dendrimers reduced by about 32% and 27%, indicating that the electrical conductance of carriers become 8.16 × 1023 and 4.41 × 1022 times higher, upon T705 adsorption. The work function (Φ) value of PAMAM and polyester is changed about 1.53 and 0.71 eV, respectively. Thus, PAMAM dendrimer is about 2.5 times stronger Φ-type sensor than polyester dendrimer. The recovery time for T705 desorption from the PAMAM and polyester surface is predicted to be 9.2 × 103 and 4.2 × 103 s, respectively, at physiological environment.

Recent advances in the synthesis of (99mTechnetium) based radio-pharmaceuticals

Technetium radionuclide (99mTc) has excellent extent of disintegration properties and occupies a special place in the field of nuclear medicinal chemistry and other health disciplines. Current review describes recent approaches of synthesis in detailed ways for radio-pharmaceuticals of technetium which have been developed to treat and diagnose the biotic disorders. These technetium labeled radio-pharmaceuticals have been established to apply in the field of diagnostic nuclear medicine especially for imaging of different body parts such as brain, heart, kidney, bones and so on, through single photon emission computed tomography (SPECT) that is thought to be difficult to image such organs by using common X-ray and MRI (Magnetic Resonance Imaging) techniques. This review highlights and accounts an inclusive study on the various synthetic routes of technetium labeled radio-pharmaceuticals using ligands with various donor atoms such as carbon, nitrogen, sulphur, phosphorus etc. These compounds can be utilized as next generation radio-pharmaceuticals.

Radiolabelling of nanomaterials for medical imaging and therapy

Nanomaterials offer unique physical, chemical and biological properties of interest for medical imaging and therapy. Over the last two decades, there has been an increasing effort to translate nanomaterial-based medicinal products (so-called nanomedicines) into clinical practice and, although multiple nanoparticle-based formulations are clinically available, there is still a disparity between the number of pre-clinical products and those that reach clinical approval. To facilitate the efficient clinical translation of nanomedicinal-drugs, it is important to study their whole-body biodistribution and pharmacokinetics from the early stages of their development. Integrating this knowledge with that of their therapeutic profile and/or toxicity should provide a powerful combination to efficiently inform nanomedicine trials and allow early selection of the most promising candidates. In this context, radiolabelling nanomaterials allows whole-body and non-invasive in vivo tracking by the sensitive clinical imaging techniques positron emission tomography (PET), and single photon emission computed tomography (SPECT). Furthermore, certain radionuclides with specific nuclear emissions can elicit therapeutic effects by themselves, leading to radionuclide-based therapy. To ensure robust information during the development of nanomaterials for PET/SPECT imaging and/or radionuclide therapy, selection of the most appropriate radiolabelling method and knowledge of its limitations are critical. Different radiolabelling strategies are available depending on the type of material, the radionuclide and/or the final application. In this review we describe the different radiolabelling strategies currently available, with a critical vision over their advantages and disadvantages. The final aim is to review the most relevant and up-to-date knowledge available in this field, and support the efficient clinical translation of future nanomedicinal products for in vivo imaging and/or therapy.

Dendrons and Dendritic Terpolymers: Synthesis, Characterization and Self-Assembly Comparison

To the best of our knowledge, this is the very first time that a thorough study of the synthetic procedures, molecular and thermal characterization, followed by structure/properties relationship for symmetric and non-symmetric second generation (2-G) dendritic terpolymers is reported. Actually, the synthesis of the non-symmetric materials is reported for the first time in the literature. Anionic polymerization enables the synthesis of well-defined polymers that, despite the architecture complexity, absolute control over the average molecular weight, as well as block composition, is achieved. The dendritic type macromolecular architecture affects the microphase separation, because different morphologies are obtained, which do not exhibit long range order, and various defects or dislocations are evident attributed to the increased number of junction points of the final material despite the satisfactory thermal annealing at temperatures above the highest glass transition temperature of all blocks. For comparison reasons, the initial dendrons (miktoarm star terpolymer precursors) which are connected to each other in order to synthesize the final dendritic terpolymers are characterized in solution and in bulk and their self-assembly is also studied. A major conclusion is that specific structures are adopted which depend on the type of the core connection between the ligand and the active sites of the dendrons.

Hyperbranching-Enhanced-Emission Effect Discovered in Hyperbranched Poly(4-(cyanomethyl)phenyl methacrylate)

To disclose the effect of architecture over fluorescence behaviors of polymers, linear and hyperbranched poly(4-(cyanomethyl)phenyl methacrylate)s (PCPMAs) were synthesized by using atom transfer radical polymerization (ATRP). Compared to linear PCPMAs with weakly AIE (AIE: aggregation-induced-emission) characteristics and small-molecule analogues of 4-(cyanomethyl)phenyl isobutyrate (CPB) with ACQ (ACQ: aggregation-caused-quenching) behaviors, hyperbranched PCPMA showed dramatically stronger fluorescence at both solution and solid states and more significant AIE characteristics, which were further enhanced by increasing the branching degree, indicating a significant hyperbranching-enhanced-emission effect (HEE). The HEE effect was attributed to the strong promotion of hyperbranched architecture over the formation of a nitrile group cluster with through-space conjugation (TSC). The HEE effect provided a promising methodology to construct efficient nontraditional fluorescent polymers without large-conjugated, rigid, and planar emitter groups.

Recent Advances in Polyesters for Biomedical Imaging

Several synthetic materials exhibiting contrast imaging properties have become vital to the field of biomedical imaging. Polymeric biomaterials and metals are commonly used imaging agents and can assist in the monitoring of therapy response, migration, degradation, changes in morphology, defects, and image-guided surgery. In comparison to metals, most bio and synthetic polymers lack inherent imaging properties. Polymeric biomaterials, specifically polyesters, have gained a considerable amount of attention due to their unique properties including biocompatibility, biodegradation, facile synthesis, and modification capability. Polyester implants and nanomaterials are available on the market or are in clinical trials for many applications including: dental implants, cranio-maxilofacial implants, soft tissue sutures and staples, abdominal wall repair, tendon and ligament reconstruction, fracture fixation devices, and coronary drug eluting stents. This review aims to provide a summary of the recent developments of polyesters with bioimaging contrast properties. The three main approaches to prepare bioimaging polyesters (coating, encapsulation, and functionalization) are discussed in depth. Furthermore, commonly used imaging modalities including X-ray computed tomography, magnetic resonance imaging, ultrasound, fluorescence, and radionucleotide polyester contrast agents are highlighted. In each section, examples of impactful bioimaging polyesters in the five major imaging modalities are evaluated.

Glyco-pseudodendrimers on a Polyester Basis: Synthesis and Investigation of Protein-Pseudodendrimer Interaction

Molar mass and end group number of a hyperbranched polyester are significantly increased by its transformation to a pseudodendrimer. Three generations of pseudodendrimers are obtained from hyperbranched aliphatic polyester core by modification with a protected AB*2 monomer. A sequence of protection and deprotection steps leads to OH-terminated pseudodendrimers. NMR studies confirm maximum degree of branching in the first generation, which slightly decreases in the next two generations. Uniform, dense molecular structure formation was confirmed by MD simulation. Further modification to glyco-pseudodendrimers was performed with α-D-mannose leading to high molar masses and dense distribution of sugar units. The interaction of these sugar units with a plant lectin concanavalin A (Con A) was investigated using dynamic light scattering and cryogenic transmission electron microscopy. The protein-interaction studies of the glyco-pseudodendrimers confirm a loose network with Con A. The interaction activity depends on the generation number and modification degree.

Biodegradable dendrimers for drug delivery

Dendrimers, as a type of artificial polymers with unique structural features, have been extensively explored for their applications in biomedical fields, especially in drug delivery. However, one important concern about the most commonly used dendrimers exists - the nondegradability, which may cause side effects induced by the accumulation of synthetic polymers in cells or tissues. Therefore, biodegradable dendrimers incorporating biodegradability with merits of dendrimers such as well-defined architectures, copious internal cavities and surface functionalities, are much more promising for developing novel nontoxic drug carriers. Herein, we review the recent advances in design and synthesis of biodegradable dendrimers, as well as their applications in fabricating drug delivery systems, with the aim to provide researchers in the related fields a good understanding of biodegradable dendrimers for drug delivery.

Water Soluble Self-Aggregates Induced Green Emission of Biocompatible Citric Acid-PEG Hyper Branched Polymer

An aliphatic citric acid-PEG hyper-branched polymer (CPHP) with a π-bond on the polymer backbone was synthesized by a single- step melt reaction in which the polymerization and π-bond formation occur simultaneously. The chemical structure of CPHP was confirmed by FTIR, 1H-NMR, 13C-NMR and MALDI-TOF mass spectral analyses. Aggregates are generally found to disperse in any solvent but the CPHP aggregates were soluble in water due to their hybrid nature. The π-bond in the aconitate unit induces green emission by CH/π interaction while the PEG unit of CPHP increases its solubility in water. The soluble aggregates induced green emission (SAIE) of the CPHP was investigated by UV-Visible absorption and emission spectra, time- correlated single photon counting (TCSPC) and zeta potential measurements. The fluorescence life time (τf) increased from 4.93 to11.38 ns with an increase in CPHP concentration. The fluorescence quantum yield (Φf) of CPHP can be altered by varying the concentration of CPHP.

Reproducible Dendronized PEG Hydrogels via SPAAC Cross-Linking

A common issue with hydrogel formulations is batch-to-batch irreproducibility originating from poorly defined polymer precursors. Here, we report the use of dendritic polymer end-groups to address this issue and maintain reproducibility between batches of poly(ethylene glycol) (PEG) hydrogels. Specifically, we synthesized two end-functionalized PEG chains: one with azide-terminated first- and second-generation dendrons and the other with strained cyclooctynes. The two complementary azide and alkyne polymers react via strain-promoted alkyne-azide cycloaddition (SPAAC) to produce hydrogels quickly in the absence of additional reagents or catalyst at low polymer concentrations. Hydrogels made with first-generation dendrons gelled in minutes and exhibited a small degree of swelling when incubated in PBS buffer at 37 °C, whereas hydrogels made from second-generation dendrons gelled in seconds with almost no swelling upon incubation at 37 °C. In both cases, the hydrogels proved reproducible, resulting in identical Young's modulus values from different batches. The hydrogels prepared with second-generation dendrons were seeded with human mesenchymal stem cells and showed high cell viability as well as cell spreading over a two-week time frame. These studies show that the SPAAC hydrogels are noncytotoxic and are capable of supporting cell growth.

Construction of Polyarylenes with Various Structural Features via Bergman Cyclization Polymerization

Synthetic polymer chemistry is a fundamental part of polymer science, and highly efficient polymerization reactions are essential for the synthesis of high-performance polymers. Development of new synthetic methods for emerging polymer science is of great importance in this regard. Bergman cyclization is a chemical process in which highly reactive aryl diradicals form from enediyne precursors, having a strong impact in a number of fields including pharmaceutics, synthetic chemistry, and materials science. Diradical intermediates stemming from enediynes can cause DNA cleavage under physiological conditions, leading to the strong cytotoxicity of many naturally occurring enediyne antibiotics. Meanwhile, diradical intermediates can quickly couple with each other to construct polyarylenes, providing a novel method to synthesize these conjugated polymers with the advantages of facile and catalyst-free operation, high efficiency, and tailored structure. Moreover, conjugated polymers generated by Bergman cyclization exhibit many remarkable properties, such as excellent thermal stability and good solubility and processability, enabling their further processing into carbon-rich materials. This review presents a brief overview of the trajectory of Bergman cyclization in polymer science, followed by an introduction to research advances, mainly from our group, in developing polymerization methods based on Bergman cyclization, taking advantages of its catalyst-free, byproduct-free, in situ polymerization mechanism to synthesize new polymeric materials with various structures and morphologies. These synthetic strategies include fabrication of rod-like polymers with polyester, dendrimer, and chiral imide side chains, functionalization of carbon nanomaterials by surface-grafting conjugated polymers, formation of nanoparticles by intramolecular collapse of single polymer chains, and construction of carbon nanomembranes on the external and internal surface of inorganic nanomaterials. These polymers with novel structural features have been used in a variety of fields, such as energy transformation, energy storage, catalyst support, and fluorescent detection. Finally, the outlook for future developments of Bergman cyclization in polymer science is presented.

Radiolabelled Polymeric Materials for Imaging and Treatment of Cancer: Quo Vadis?

Owing to their tunable blood circulation time and suitable plasma stability, polymer-based nanomaterials hold a great potential for designing and utilising multifunctional nanocarriers for efficient imaging and effective treatment of cancer. When tagged with appropriate radionuclides, they may allow for specific detection (diagnosis) as well as the destruction of tumours (therapy) or even customization of materials, aiming to both diagnosis and therapy (theranostic approach). This review provides an overview of recent developments of radiolabelled polymeric nanomaterials (natural and synthetic polymers) for molecular imaging of cancer, specifically, applying nuclear techniques such as positron emission tomography (PET) and single-photon emission computed tomography (SPECT). Different approaches to radiolabel polymers are evaluated from the methodical radiochemical point of view. This includes new bifunctional chelating agents (BFCAs) for radiometals as well as novel labelling methods. Special emphasis is given to eligible strategies employed to evade the mononuclear phagocytic system (MPS) in view of efficient targeting. The discussion encompasses promising strategies currently employed as well as emerging possibilities in radionuclide-based cancer therapy. Key issues involved in the clinical translation of radiolabelled polymers and future scopes of this intriguing research field are also discussed.

Design, synthesis and cytotoxic activity of water-soluble quinones with dibromo-p-benzoquinone cores and amino oligo(ethylene glycol) side chains against MCF-7 breast cancer cells

A series of novel quinones was synthesized by reacting tetrabromo-p-benzoquinone with amino oligo(ethylene glycol) dendrons of generation numbers g = 0-2. According to the performed shake-flask experiments, their aqueous solubility (S = 18 mg l^-1-1.6 g ml^-1) and partition coefficients (log P_oct/wat = 2.53-0.21) can be tuned in a wide range as a function of g. In vitro cytotoxicity assays of tetrabromo-p-benzoquinone and its derivatives against MCF-7 human breast cancer cells showed a concentration- and generation-specific biological activity with IC₅₀-values as low as 0.8 μM. Further investigations revealed a considerable selectivity against cancer cells, as indicated by a weak cytotoxicity against human skin fibroblast cells (>80% survival) within the studied range of concentrations. The results demonstrate that these novel amino oligo(ethylene glycol) dendrons depict versatile tools to ameliorate physical and pharmacological characteristics of extremely hydrophobic molecules and make them susceptible to biological applications.

Image-Guided Drug Delivery with Single-Photon Emission Computed Tomography: A Review of Literature

Tremendous resources are being invested all over the world for prevention, diagnosis, and treatment of various types of cancer. Successful cancer management depends on accurate diagnosis of the disease along with precise therapeutic protocol. The conventional systemic drug delivery approaches generally cannot completely remove the competent cancer cells without surpassing the toxicity limits to normal tissues. Therefore, development of efficient drug delivery systems holds prime importance in medicine and healthcare. Also, molecular imaging can play an increasingly important and revolutionizing role in disease management. Synergistic use of molecular imaging and targeted drug delivery approaches provides unique opportunities in a relatively new area called 'image-guided drug delivery' (IGDD). Single-photon emission computed tomography (SPECT) is the most widely used nuclear imaging modality in clinical context and is increasingly being used to guide targeted therapeutics. The innovations in material science have fueled the development of efficient drug carriers based on, polymers, liposomes, micelles, dendrimers, microparticles, nanoparticles, etc. Efficient utilization of these drug carriers along with SPECT imaging technology have the potential to transform patient care by personalizing therapy to the individual patient, lessening the invasiveness of conventional treatment procedures and rapidly monitoring the therapeutic efficacy. SPECT-IGDD is not only effective for the treatment of cancer but might also find utility in the management of several other diseases. Herein, we provide a concise overview of the latest advances in SPECT-IGDD procedures and discuss the challenges and opportunities for advancement of the field.

Development of individualized anti-metastasis strategies by engineering nanomedicines

Metastasis is deadly and also tough to treat as it is much more complicated than the primary tumour. Anti-metastasis approaches available so far are far from being optimal. A variety of nanomedicine formulae provide a plethora of opportunities for developing new strategies and means for tackling metastasis. It should be noted that individualized anti-metastatic nanomedicines are different from common anti-cancer nanomedicines as they specifically target different populations of malignant cells. This review briefly introduces the features of the metastatic cascade, and proposes a series of nanomedicine-based anti-metastasis strategies aiming to block each metastatic step. Moreover, we also concisely introduce the advantages of several promising nanoparticle platforms and their potential for constructing state-of-the-art individualized anti-metastatic nanomedicines.

The Present and the Future of Degradable Dendrimers and Derivatives in Theranostics

Interest in dendrimer-based nanomedicines has been growing recently, as it is possible to precisely manipulate the molecular weight, chemical composition, and surface functionality of dendrimers, tuning their properties according to the desired biomedical application. However, one important concern about dendrimer-based therapeutics remains-the nondegradability under physiological conditions of the most commonly used dendrimers. Therefore, biodegradable dendrimers represent an attractive class of nanomaterials, since they present advantages over conventional nondegradable dendrimers regarding the release of the loaded molecules and the prevention of bioaccumulation of synthetic materials and subsequent cytotoxicity. Here, we present an overview of the state-of-the-art of the design of biodegradable dendritic structures, with particular focus on the hurdles regarding the use of these as vectors of drugs and nucleic acids, as well as macromolecular contrast agents.

Synthesis of novel types of polyester glycodendrimers as potential inhibitors of urinary tract infections

Syntheses of highly mannosylated polyester dendrimers with 2, 4, 8, and 16 α-d-mannopyranose residues on their peripheries connected by different linker arms are presented.

Evidence of guest encapsulation within G8 and G10 dendrimers using NMR techniques

Encapsulation of guest molecules within the interior cavities of dendrimers is promising, but high generation dendrimers show limited encapsulation capacity due to their dense surface shell. Here, for the first time, we prove that high generation polyamidoamine dendrimers, such as generation 8 and generation 10, are able to encapsulate hydrophobic guests using NMR spectroscopy. Guest molecules such as phenylbutazone, dexamethasone sodium phosphate and 9-anthracenecarboxylic acid with molecular weights up to 516 Da are in close proximity to the interior scaffold protons of high generation dendrimers. This encapsulation behavior depends on guest hydrophobicity. Chemical defects and back-folding of terminal groups make it possible for these guest molecules to penetrate through the dense surface shell of high generation dendrimers. These results provide new insights into the host-guest chemistry of dendrimers.

Emerging concepts in dendrimer-based nanomedicine: from design principles to clinical applications

Dendrimers are discrete nanostructures/nanoparticles with 'onion skin-like' branched layers. Beginning with a core, these nanostructures grow in concentric layers to produce stepwise increases in size that are similar to the dimensions of many in vivo globular proteins. These branched tree-like concentric layers are referred to as 'generations'. The outer generation of each dendrimer presents a precise number of functional groups that may act as a monodispersed platform for engineering favourable nanoparticle-drug and nanoparticle-tissue interactions. These features have attracted significant attention in medicine as nanocarriers for traditional small drugs, proteins, DNA/RNA and in some instances as intrinsically active nanoscale drugs. Dendrimer-based drugs, as well as diagnostic and imaging agents, are emerging as promising candidates for many nanomedicine applications. First, we will provide a brief survey of recent nanomedicines that are either approved or in the clinical approval process. This will be followed by an introduction to a new 'nanoperiodic' concept which proposes nanoparticle structure control and the engineering of 'critical nanoscale design parameters' (CNDPs) as a strategy for optimizing pharmocokinetics, pharmocodynamics and site-specific targeting of disease. This paradigm has led to the emergence of CNDP-directed nanoperiodic property patterns relating nanoparticle behaviour to critical in vivo clinical translation issues such as cellular uptake, transport, elimination, biodistribution, accumulation and nanotoxicology. With a focus on dendrimers, these CNDP-directed nanoperiodic patterns are used as a strategy for designing and optimizing nanoparticles for a variety of drug delivery and imaging applications, including a recent dendrimer-based theranostic nanodevice for imaging and treating cancer. Several emerging preclinical dendrimer-based nanotherapy concepts related to inflammation, neuro-inflammatory disorders, oncology and infectious and ocular diseases are reviewed. Finally we will consider challenges and opportunities anticipated for future clinical translation, nanotoxicology and the commercialization of nanomedicine.

Multifunctional PEGylated multiwalled carbon nanotubes for enhanced blood pool and tumor MR imaging

Long-circulating multifunctional Gd(III)-loaded multiwalled carbon nanotubes (MWCNTs) modified with polyethylene glycol are designed and synthesized. The formed MWCNTs are water-dispersible, stable, and have good cytocompatibility and antifouling property. With the low r 2 /r 1 relaxivity ratio and relatively long blood circulation time, the multifunctional MWCNTs are able to be used as a platform for enhanced blood pool and tumor MR imaging.

Multivalent viral capsids with internal cargo for fibrin imaging

Thrombosis is the cause of many cardiovascular syndromes and is a significant contributor to life-threatening diseases, such as myocardial infarction and stroke. Thrombus targeted imaging agents have the capability to provide molecular information about pathological clots, potentially improving detection, risk stratification, and therapy of thrombosis-related diseases. Nanocarriers are a promising platform for the development of molecular imaging agents as they can be modified to have external targeting ligands and internal functional cargo. In this work, we report the synthesis and use of chemically functionalized bacteriophage MS2 capsids as biomolecule-based nanoparticles for fibrin imaging. The capsids were modified using an oxidative coupling reaction, conjugating ∼90 copies of a fibrin targeting peptide to the exterior of each protein shell. The ability of the multivalent, targeted capsids to bind fibrin was first demonstrated by determining the impact on thrombin-mediated clot formation. The modified capsids out-performed the free peptides and were shown to inhibit clot formation at effective concentrations over ten-fold lower than the monomeric peptide alone. The installation of near-infrared fluorophores on the interior surface of the capsids enabled optical detection of binding to fibrin clots. The targeted capsids bound to fibrin, exhibiting higher signal-to-background than control, non-targeted MS2-based nanoagents. The in vitro assessment of the capsids suggests that fibrin-targeted MS2 capsids could be used as delivery agents to thrombi for diagnostic or therapeutic applications.