One- to Two-Electron Reduction of an [FeFe]-Hydrogenase Active Site Mimic: The Critical Role of Fluxionality of the [2Fe2S] Core

Biomimetic [MFe3S4]3+ Cubanes (M = V/Mo) as Catalysts for a Fischer-Tropsch-like Hydrocarbon Synthesis─A Computational Study

Nitrogenase is the enzyme primarily responsible for reducing atmospheric nitrogen to ammonia. There are three general forms of nitrogenase based on the metal ion present in the cofactor binding site, namely, molybdenum-dependent nitrogenases with the iron-molybdenum cofactor (FeMoco), the vanadium-dependent nitrogenases with FeVco, and the iron-only nitrogenases. It has been shown that the vanadium-dependent nitrogenases tend to have a lesser efficacy in reducing dinitrogen but a higher efficacy in binding and reducing carbon monoxide. In biomimetic chemistry, [MFe3S4] (M = Mo/V) cubanes have been synthesized, studied, and shown to be promising mimics of some of the geometric and electronic properties of the nitrogenase cofactors. In this work, a density functional theory (DFT) study is presented on Fischer-Tropsch catalysis by these cubane complexes by studying CO binding and reduction to hydrocarbons. Our work implies that molybdenum has stronger binding interactions with the iron-sulfur framework of the cubane, which results in easier reduction of substrates like N2H4. However, this inhibits the binding and activation of CO, and hence, the molybdenum-containing complexes are less suitable for Fischer-Tropsch catalysis than vanadium-containing complexes.

Catalyst Protonation Changes the Mechanism of Electrochemical Hydride Transfer to CO2

It is well-known that addition of a cationic functional group to a molecule lowers the necessary applied potential for an electron transfer (ET) event. This report studies the effect of a proton (a cation) on the mechanism of electrochemically driven hydride transfer (HT) catalysis. Protonated, air-stable [HFe4N(triethyl phosphine (PEt3))4(CO)8] (H4) was synthesized by reaction of PEt3 with [Fe4N(CO)12]- (A -) in tetrahydrofuran, with addition of benzoic acid to the reaction mixture. The reduction potential of H4 is -1.70 V vs SCE which is 350 mV anodic of the reduction potential for 4 -. Reactivity studies are consistent with HT to CO2 or to H+ (carbonic acid), as the chemical event following ET, when the electrocatalysis is performed under 1 atm of CO2 or N2, respectively. Taken together, the chemical and electrochemical studies of mechanism suggest an ECEC mechanism for the reduction of CO2 to formate or H+ to H2, promoted by H4. This stands in contrast to an ET, two chemical steps, followed by an ET (ECCE) mechanism that is promoted by the less electron rich catalyst A -, since A - must be reduced to A 2- before HA - can be accessed.

Covalent versus noncovalent attachments of [FeFe]‑hydrogenase models onto carbon nanotubes for aqueous hydrogen evolution reaction

In an effort to develop the biomimetic chemistry of [FeFe]‑hydrogenases for catalytic hydrogen evolution reaction (HER) in aqueous environment, we herein report the integrations of diiron dithiolate complexes into carbon nanotubes (CNTs) through three different strategies and compare the electrochemical HER performances of the as-resulted 2Fe2S/CNT hybrids in neutral aqueous medium. That is, three new diiron dithiolate complexes [{(μ-SCH2)2N(C6H4CH2C(O)R)}Fe2(CO)6] (R = N-oxylphthalimide (1), NHCH2pyrene (2), and NHCH2Ph (3)) were prepared and could be further grafted covalently to CNTs via an amide bond (this 2Fe2S/CNT hybrid is labeled as H1) as well as immobilized noncovalently to CNTs via π-π stacking interaction (H2) or via simple physisorption (H3). Meanwhile, the molecular structures of 1-3 are determined by elemental analysis and spectroscopic as well as crystallographic techniques, whereas the structures and morphologies of H1-H3 are characterized by various spectroscopies and scanning electronic microscopy. Further, the electrocatalytic HER activity trend of H1 > H2 ≈ H3 is observed in 0.1 M phosphate buffer solution (pH = 7) through different electrochemical measurements, whereas the degradation processes of H1-H3 lead to their electrocatalytic deactivation in the long-term electrolysis as proposed by post operando analysis. Thus, this work is significant to extend the potential application of carbon electrode materials engineered with diiron molecular complexes as heterogeneous HER electrocatalysts for water splitting to hydrogen.

Recent developments in electrochemical investigations into iron carbonyl complexes relevant to the iron centres of hydrogenases

In this brief review mainly based on our own work, we summarised the electrochemical investigations into those iron carbonyl complexes relevant to the iron centres of [FeFe]-and [Fe]-hydrogenases in the following aspects: (i) electron transfer (E) coupled with a chemical reaction (C), EC process, (ii) two-electron process with potential inversion (EC_isoE), and (iii) proton-coupled electron transfer (PCET) and the role of an internal base group in the non-coordination sphere. Through individual examples, these processes involved in the electrochemistry of the iron carbonyl complexes are discussed. In probing the complexes involving a two-electron process with potential inversion, the co-existence of one- and two-electron for a complex is demonstrated by incorporating intramolecularly a ferrocenyl group(s) into the complex. Our studies on proton reduction catalysed by three diiron complexes involving the PCET mechanism are also summarised. Finally, perspectives of the electrochemical study in iron carbonyl complexes inspired by the iron-containing enzymes are mentioned in the sense of developing mimics of low overpotentials for hydrogen evolution through exploiting the PCET effect.

Rational Design of Fe2 (μ-PR2 )2 (L)6 Coordination Compounds Featuring Tailored Potential Inversion

It was recently discovered that some redox proteins can thermodynamically and spatially split two incoming electrons towards different pathways, resulting in the one-electron reduction of two different substrates, featuring reduction potential respectively higher and lower than the parent reductant. This energy conversion process, referred to as electron bifurcation, is relevant not only from a biochemical perspective, but also for the ground-breaking applications that electron-bifurcating molecular devices could have in the field of energy conversion. Natural electron-bifurcating systems contain a two-electron redox centre featuring potential inversion (PI), i. e. with second reduction easier than the first. With the aim of revealing key factors to tailor the span between first and second redox potentials, we performed a systematic density functional study of a 26-molecule set of models with the general formula Fe₂ (μ-PR₂ )₂ (L)₆ . It turned out that specific features such as i) a Fe-Fe antibonding character of the LUMO, ii) presence of electron-donor groups and iii) low steric congestion in the Fe's coordination sphere, are key ingredients for PI. In particular, the synergic effects of i)-iii) can lead to a span between first and second redox potentials larger than 700 mV. More generally, the "molecular recipes" herein described are expected to inspire the synthesis of Fe₂ P₂ systems with tailored PI, of primary relevance to the design of electron-bifurcating molecular devices.

FeMo Heterobimetallic Dithiolate Complexes: Investigation of Their Electron Transfer Chemistry and Reactivity toward Acids, a Density Functional Theory Rationalization

The electrochemical behavior of complexes [FeMo(CO)₅(κ²-dppe)(μ-pdt)] (1) and [FeMo(CO)₄(MeCN)(κ²-dppe)(μ-pdt)] (2), in the absence and in the presence of acid, has been investigated. The reduction of 1 follows at slow scan rates, in CH₂Cl₂-[NBu₄][PF₆] and acid-free media, an EC_revE mechanism that is supported by cyclic voltammetry (CV) experiments and digital CV simulations. In MeCN-[NBu₄][PF₆], the electrochemical reduction of 1 is the same as in dichloromethane and follows an ECE mechanism at slow scan rates, but with a positive shift of the redox potentials. In contrast, the oxidation of 1 is strongly solvent-dependent. In dichloromethane, the oxidation of 1 is reversible and involves a single electron, while in acetonitrile, it is irreversible at moderate and slow scan rates ( v ≤ ca. 1 V s^-1), and some chemical reversibility is apparent at higher scan rates ( v = 10 V s^-1). Density functional theory calculations revealed that the chemical step in the EC_revE mechanism corresponds to the dissociation of one PPh₂ end of the diphosphine ligand and the transfer of the semibridging CO to the Fe atom, similarly to the mechanism observed in the FeFe analogue complex. However, in the case of 1, the subsequent coordination of the phosphine ligand to the other metal is an unfavorable process.

[FeFe]-Hydrogenase H-Cluster Mimics with Various -S(CH2)nS- Linker Lengths (n = 2-8): A Systematic Study

The effect of the nature of the dithiolato ligand on the physical and electrochemical properties of synthetic H-cluster mimics of the [FeFe]-hydrogenase is still of significant concern. In this report we describe the cyclization of various alkanedithiols to afford cyclic disulfide, tetrasulfide, and hexasulfide compounds. The latter compounds were used as proligands for the synthesis of a series of [FeFe]-hydrogenase H-cluster mimics having the general formulas [Fe₂(CO)₆{μ-S(CH₂)_nS}] (n = 4-8), [Fe₂(CO)₆{μ-S(CH₂)_nS}]₂ (n = 6-8), and [Fe₂(CO)₆{(μ-S(CH₂)_nS)₂}] (n = 6-8). The resulting complexes were characterized by ¹H and ¹³C{¹H} NMR and IR spectroscopic techniques, mass spectrometry, and elemental analysis as well as X-ray analysis. The purpose of this research was to study the influence of the systematic increase of n from 2 to 7 on the redox potentials of the models and the catalytic ability in the presence of acetic acid (AcOH) by applying cyclic voltammetry.

A mononuclear iron carbonyl complex [Fe(μ-bdt)(CO)2(PTA)2] with bulky phosphine ligands: a model for the [FeFe] hydrogenase enzyme active site with an inverted redox potential

A mononuclear hexa-coordinated iron carbonyl complex [Fe(μ-bdt)(CO)₂(PTA)₂] 1 (bdt = 1,2-benzenedithiolate; PTA = 1,3,5-triaza-7-phosphaadamantane) with two bulky phosphine ligands in the trans position was synthesized and characterized by X-ray structural analysis coulometry data, FTIR, electrochemistry and electronic structure calculations. The complex undergoes a facilitated two-electron reduction 1/1^2- and shows an inverted one-electron reduction for 1/1^- at higher potentials. Electrochemical investigations of 1 are compared to the closely related [Fe(bdt)(CO)₂(PMe₃)₂] compound. A mechanistic suggestion for the hydrogen evolution reaction upon proton reduction from acid media is derived. The stability of 1 in both weak and strong acids is monitored by cyclic voltammetry.

Bridgehead isomer effects in bis(phosphido)-bridged diiron hexacarbonyl proton reduction electrocatalysts

The influence of the substitution, orientation and structure of the phosphido bridges in [Fe₂(CO)₆(μ-PR₂)₂] electrocatalysts of proton reduction has been studied. The isomers e,a-[Fe₂(CO)₆{μ-P(Ar)H}₂] (1a(Ar): Ar = Ph, 2'-methoxy-1,1'-binaphthyl (bn')), e,e-[Fe₂(CO)₆{μ-P(Ar)H}₂] (1b(Ar): Ar = Ph, bn') were isolated from reactions of iron pentacarbonyl and the corresponding primary phosphine, syntheses that also afforded the phosphinidene-capped tri-iron clusters, [Fe₃(CO)₉(μ-CO)(μ₃-Pbn')] (2) and [Fe₃(CO)₉(μ₃-PAr)₂] (3(Ar), Ar = Ph, bn'). A ferrocenyl (Fc)-substituted dimer [Fe₂(CO)₆{μ:μ'-1,2-(P(CH₂Fc)CH₂)₂C₆H₄}] (4), in which the two phosphido bridges are linked by an o-xylyl group, was also prepared. The molecular structures of complexes 1a(Ph), 1b(Ph), 1b(bn'), 2 and 4 were established by X-ray crystallography. All complexes have been examined as electrocatalysts for proton reduction using p-toluene sulfonic acid in tetrahydrofuran. Cyclic voltammograms of the dimers with acid exhibit two catalysis waves for proton reduction. The first wave, which appears at the potential of the primary reduction, reaches maximum current (turnover) at moderate acid concentrations and is rapidly overtaken by the second wave, which appears at more negative potential. Both of these reductive waves show an initial first order dependence on acid. The electrochemistry and electrocatalyses of the [Fe₂(CO)₆(μ-PR₂)₂] dimers show subtle variations with the nature of the bridging phosphido group(s), including the orientation of bridgehead hydrogen atoms.

Mononuclear, Dinuclear, and Trinuclear Iron Complexes Featuring a New Monoanionic SNS Thiolate Ligand

The new tridentate ligand, S(Me)N(H)S = 2-(2-methylthiophenyl)benzothiazolidine, prepared in a single step from commercial precursors in excellent yield, undergoes ring-opening on treatment with Fe(OTf)2 in the presence of base affording a trinuclear iron complex, [Fe3(μ2-S(Me)NS(-))4](OTf)2 (1) which is fully characterized by structural and spectroscopic methods. X-ray structural data reveal that 1 contains four S(Me)NS(-) ligands meridionally bound to two pseudooctahedral iron centers each bridged by two thiolates to a distorted tetrahedral central iron. The combined spectroscopic (UV-vis, Mössbauer, NMR), magnetic (solution and solid state), and computational (DFT) studies indicate that 1 includes a central, high-spin Fe(II) (S = 2) with two low-spin (S = 0) peripheral Fe(II) centers. Complex 1 reacts with excess PMePh2, CNxylyl (2,6-dimethylphenyl isocyanide), and P(OMe)3 in CH3CN to form diamagnetic, thiolate-bridged, dinuclear Fe(II) complexes {[Fe(μ-S(Me)NS(-))L2]2}(OTf)2 (2-4). These complexes are characterized by elemental analysis; (1)H NMR, IR, UV-vis, and Mössbauer spectroscopy; and single crystal X-ray diffraction. Interestingly, addition of excess P(OMe)3 to complex 1 in CH2Cl2 produces primarily the diamagnetic, mononuclear Fe(II) complex, {Fe(S(Me)NS(-))[P(OMe)3]3}(OTf) (5).

Facilitated carbon dioxide reduction using a Zn(II) complex

Two new Zn(II) complexes have been prepared and evaluated for their capacity to activate and reduce CO2. The electrochemical properties of dichlorobis[diphenyl-(2-pyridyl)phosphine-κ(1)-N]zinc(II) [corrected]. and dichloro[diphenyl-(2-pyridyl)phosphine-κ(1)-N]zinc(II) 2 are compared using cyclic voltammetry. Electrochemical results indicate that 2 leads to a facilitated CO2 reduction to evolve CO at a glassy carbon electrode.

A sterically stabilized FeI–FeI semi-rotated conformation of [FeFe] hydrogenase subsite model

Semi-rotated state – As the first example so far a [Fe^IFe^I] H₂ase model complex with a bulky silicon-containing dithiolate bridge is reported showing a semi-rotated geometry without the need of stabilization via agostic interactions.

Formation, reactivity and redox properties of carbon- and sulfur-bridged diiron complexes derived from dibenzothienyl Schiff bases: effect of N,N- and N,P-chelating moieties

Redox properties of C,S-bridged diiron complexes were controlled by using dibenzothienyl Schiff base precursors with an N,N- or N,P-chelating moiety.

Diiron hexacarbonyl complexes bearing naphthalene-1,8-dithiolate bridge moiety as mimics of the sub-unit of [FeFe]-hydrogenase: synthesis, characterisation and electrochemical investigations

Reducing the formyl group into a hydroxyl group allows the further synthesis of novel diiron complexes with various functionalities.

Ligand effects on the electrochemical behavior of [Fe2(CO)5(L){μ-(SCH2)2(Ph)PO}] (L = PPh3, P(OEt)3) hydrogenase model complexes

In this paper we study the influence of substituting one CO ligand in [Fe₂(CO)₆{μ-(SCH₂)₂(Ph)PO}] (1) by better σ-donors (PPh₃(2) and P(OMe)₃(3)) in relation to the electrochemical behavior.

Steric effect of the dithiolato linker on the reduction mechanism of [Fe2(CO)6{μ-(XCH2)2CRR′}] hydrogenase models (X = S, Se)

Investigations of the electrochemical properties of [Fe₂(CO)₆{μ-(XCH₂)₂CRR′}] (X = S, Se; R or R′ = H or Me) showed that the complex with the bulkiest CMe₂moiety undergoes reduction with potential inversion.

Structural characterization of CO-inhibited Mo-nitrogenase by combined application of nuclear resonance vibrational spectroscopy, extended X-ray absorption fine structure, and density functional theory: new insights into the effects of CO binding and the role of the interstitial atom

The properties of CO-inhibited Azotobacter vinelandii (Av) Mo-nitrogenase (N2ase) have been examined by the combined application of nuclear resonance vibrational spectroscopy (NRVS), extended X-ray absorption fine structure (EXAFS), and density functional theory (DFT). Dramatic changes in the NRVS are seen under high-CO conditions, especially in a 188 cm(-1) mode associated with symmetric breathing of the central cage of the FeMo-cofactor. Similar changes are reproduced with the α-H195Q N2ase variant. In the frequency region above 450 cm(-1), additional features are seen that are assigned to Fe-CO bending and stretching modes (confirmed by (13)CO isotope shifts). The EXAFS for wild-type N2ase shows evidence for a significant cluster distortion under high-CO conditions, most dramatically in the splitting of the interaction between Mo and the shell of Fe atoms originally at 5.08 Å in the resting enzyme. A DFT model with both a terminal -CO and a partially reduced -CHO ligand bound to adjacent Fe sites is consistent with both earlier FT-IR experiments, and the present EXAFS and NRVS observations for the wild-type enzyme. Another DFT model with two terminal CO ligands on the adjacent Fe atoms yields Fe-CO bands consistent with the α-H195Q variant NRVS. The calculations also shed light on the vibrational "shake" modes of the interstitial atom inside the central cage, and their interaction with the Fe-CO modes. Implications for the CO and N2 reactivity of N2ase are discussed.

Bioinspired Hydrogenase Models: The Mixed-Valence Triiron Complex [Fe3(CO)7(μ-edt)2] and Phosphine Derivatives [Fe3(CO)7-x (PPh3) x (μ-edt)2] (x = 1, 2) and [Fe3(CO)5(κ2-diphosphine)(μ-edt)2] as Proton Reduction Catalysts

The mixed-valence triiron complexes [Fe3(CO)7-x (PPh3) x (μ-edt)2] (x = 0-2; edt = SCH2CH2S) and [Fe3(CO)5(κ2-diphosphine)(μ-edt)2] (diphosphine = dppv, dppe, dppb, dppn) have been prepared and structurally characterized. All adopt an anti arrangement of the dithiolate bridges, and PPh3 substitution occurs at the apical positions of the outer iron atoms, while the diphosphine complexes exist only in the dibasal form in both the solid state and solution. The carbonyl on the central iron atom is semibridging, and this leads to a rotated structure between the bridged diiron center. IR studies reveal that all complexes are inert to protonation by HBF4·Et2O, but addition of acid to the pentacarbonyl complexes results in one-electron oxidation to yield the moderately stable cations [Fe3(CO)5(PPh3)2(μ-edt)2]+ and [Fe3(CO)5(κ2-diphosphine)(μ-edt)2]+, species which also result upon oxidation by [Cp2Fe][PF6]. The electrochemistry of the formally Fe(I)-Fe(II)-Fe(I) complexes has been investigated. Each undergoes a quasi-reversible oxidation, the potential of which is sensitive to phosphine substitution, generally occurring between 0.15 and 0.50 V, although [Fe3(CO)5(PPh3)2(μ-edt)2] is oxidized at -0.05 V. Reduction of all complexes is irreversible and is again sensitive to phosphine substitution, varying between -1.47 V for [Fe3(CO)7(μ-edt)2] and around -1.7 V for phosphine-substituted complexes. In their one-electron-reduced states, all complexes are catalysts for the reduction of protons to hydrogen, the catalytic overpotential being increased upon successive phosphine substitution. In comparison to the diiron complex [Fe2(CO)6(μ-edt)], [Fe3(CO)7(μ-edt)2] catalyzes proton reduction at 0.36 V less negative potentials. Electronic structure calculations have been carried out in order to fully elucidate the nature of the oxidation and reduction processes. In all complexes, the HOMO comprises an iron-iron bonding orbital localized between the two iron atoms not ligated by the semibridging carbonyl, while the LUMO is highly delocalized in nature and is antibonding between both pairs of iron atoms but also contains an antibonding dithiolate interaction.

[FeFe] hydrogenase active site modeling: a key intermediate bearing a thiolate proton and Fe hydride

The first di-protonated [FeFe] hydrogenase model relevant to key intermediates in catalytic hydrogen production is reported. The complex bearing the S-proton and Fe-hydride is structurally and spectroscopically characterized as well as studied by DFT calculations. The results show that the thiolate sulfur can accept protons during the catalytic routes.

Multielectron-transfer templates via consecutive two-electron transformations: iron-sulfur complexes relevant to biological enzymes

[FeFe] hydrogenase mimics: two polynuclear iron-sulfur complexes (1 and 2) were prepared and structurally characterized. They are potentially effective and stable multielectron-transfer relays for mediating four- and six-electron transformations via a cascade of reversible two-electron redox steps with relatively narrow potential spans.

Electron delocalization from the fullerene attachment to the diiron core within the active-site mimics of [FeFe]hydrogenase

Attachment of the redox-active C(60)(H)PPh(2) group modulates the electronic structure of the Fe(2) core in [(μ-bdt)Fe(2)(CO)(5)(C(60)(H)PPh(2))]. The neutral complex is characterized by X-ray crystallography, IR, NMR spectroscopy, and cyclic voltammetry. When it is reduced by one electron, the spectroscopic and density functional theory results indicate that the Fe(2) core is partially spin-populated. In the doubly reduced species, extensive electron communication occurs between the reduced fullerene unit and the Fe(2) centers as displayed in the spin-density plot. The results suggest that the [4Fe4S] cluster within the H cluster provides an essential role in terms of the electronic factor.