Alternating and random copolymerization of isoprene and ethylene catalyzed by cationic half-sandwich scandium alkyls

Binuclear Enamino-Oxazolinate Rare-Earth Metal Complexes: Synthesis and Their Catalytic Performance in Isoprene Polymerization

We have synthesized a series of binuclear rare-earth metal complexes bearing the newly designed enamino-oxazolinate ligands that feature bridging para-phenyl, meta-phenyl, 1,5-naphthalenyl, and 1,5-anthracenyl moieties. NMR and X-ray diffraction analyses confirmed the binuclear structures of the obtained complexes with two enamino-oxazolinate-metal units located at a trans position against the bridged aryl plane. After activation by [Ph3C][B(C6F5)4], all the rare-earth metal complexes served as efficient catalysts for isoprene polymerization, producing polymers with high cis-1,4 regularity (up to 96.1%) and high molecular weight. The steric and electronic effects exerted on the active metal centers, as well as the radius of metal centers, were the major contributing factors for determining both the catalytic activity and cis-1,4-selectivity of the binuclear catalytic systems. Compared to its mononuclear analogue, the binuclear yttrium catalytic system with a para-phenyl bridge exhibited a higher thermostability and catalytic efficiency during polymerization, revealing a special binuclear effect in this binuclear catalytic system.

Rare-Earth Metallocenes for Polymerization of Olefins and Conjugated Dienes: From Fundamental Studies to Olefin Block Copolymers

The various steps in the mechanism of olefin polymerizations mediated by neutral rare-earth metallocene complexes are discussed. The complexes are either trivalent hydride and alkyl rare-earth compounds or divalent metallocenes that are activated by the monomer via an oxidation step. The stereospecific polymerizations of conjugated dienes based on the association of a cationic metallocene complex and an alkylaluminum and the polymerization mechanism based on monomer insertion into an aluminum-carbon bond are also discussed. The exploitation of metallocene complexes for the copolymerization of olefins with conjugated dienes is the subject of a third part of this review. The synthesis of new elastomers called ethylene butadiene rubber (EBR) is highlighted. Finally, the use of rare-earth metallocenes in macromolecular engineering is detailed. This includes the synthesis of functional polyolefins and block copolymers including thermoplastic elastomers.

Divergent Synthesis of Multi-Substituted Aminotetralins via [4+2] Annulation of Aldimines with Alkenes by Rare-Earth-Catalyzed Benzylic C(sp3 )-H Activation

The search for efficient and selective methods for the divergent synthesis of multi-substituted aminotetralins is of much interest and importance. We report herein for the first time the diastereoselective [4+2] annulation of 2-methyl aromatic aldimines with alkenes via benzylic C(sp3 )-H activation by half-sandwich rare-earth catalysts, which constitutes an efficient route for the divergent synthesis of both trans and cis diastereoisomers of multi-substituted 1-aminotetralin derivatives from readily accessible aldimines and alkenes. The use of a scandium catalyst bearing a sterically demanding cyclopentadienyl ligand such as C5 Me4 SiMe3 or C5 Me5 exclusively afforded the trans-selective annulation products in the reaction of aldimines with styrenes and aliphatic alkenes. In contrast, the analogous yttrium catalyst, whose metal ion size is larger than that of scandium, yielded the cis-selective annulation products. This protocol features 100 % atom-efficiency, excellent diastereoselectivity, broad substrate scope, and good functional group compatibility. The reaction mechanisms have been elucidated by kinetic isotope effect (KIE) experiments and the isolation and transformations of some key reaction intermediates.

Copolymerization of ethylene and isoprene via silicon bridge metallocene [rac-Me2Si(2-Me-4-Ph-Ind)2ZrCl2] catalyst: A new way to control the composition and microstructure of copolymers

The copolymerization of ethylene (E) with isoprene (Ip) was performed catalyzed by a symmetrical catalyst exhibiting a silicon bridge [rac-Me2Si(2-Me-4-Ph-Ind)2ZrCl2 with the combination of borate/TIBA activator. The effect of cocatalyst, Ip concentration, and polymerization temperature on the activity, molecular weight (Mw), distribution (MWD), comonomer composition, chain structure (regio- and stereoselectivity), and resulting side reactions were logically addressed. Gel-permeation chromatography (GPC) was used to characterize the Mw and polydispersity, while nuclear magnetic resonance (NMR) was employed for the chain structure of the polymers. The catalytic activity was significantly lower by increasing the Ip concentration in the feed, and the isoprene content in resulting polymers was lower under the reaction condition, leading to higher activity. Insertion of isoprene units in polymer structure demonstrates the higher regioselectivity for the 3,4 connections than the 1,4 connections and is expected to be a high-resistance polymer against acids. The MWD presented monomodal even with a higher concentration (1.44 mol/L) and did not appear as low Mw peaks of Ip. The Mw was higher with a broader MWD when purely TIBA was used as a cocatalyst, and it significantly reduced and presented a narrowed MWD with TEA in the cocatalyst. The higher efficiency of the catalyst for the higher insertion of Ip (C=C double bond) effectively modifies the polymer backbone. It is expected to be a promising candidate for easily degradable and favorable solutions for solving environmental problems caused by PE. wastes.

π-Carbazolyl supported bis(alkyl) complexes of Sc, Y and La for α-olefin polymerization and hydrogenation

A series of new half-sandwich bis(alkyl) rare-earth metal complexes coordinated by a sterically demanding 1,3,6,8-tetra-tert-butyl-carbazol-9-yl ligand [tBu₄Carb]La(CH₂C₆H₅)₂(THF) (1-La), [tBu₄Carb]Ln(o-NMe₂C₆H₄CH₂)₂ (Ln = Sc (2-Sc), Y (2-Y), La (2-La), [tBu₄Carb]Ln(CH₂SiMe₃)₂(THF) (Ln = Sc (3-Sc), Y (3-Y)), were synthesized. 1-La, 2-La, and 2-Y were prepared by an alkane elimination protocol, while 2-Sc, 3-Sc, and 3-Y became accessible only when salt metathesis reactions of tBu₄CarbK with R₂Ln(THF)_n⁺[BPh₄]^- were employed. X-ray analysis revealed that in all complexes the carbazolyl ligand exhibits π-coordination with metal ions. 2-Sc and 3-Sc when activated with [Ph₃C][B(C₆F₅)₄] demonstrate excellent activity in α-olefin (octene-1, nonene-1, decene-1 and 1,1-diphenyl-but-1-ene) polymerization. When H₂ was used as a chain transfer agent (1 bar, rt) in the presence of 3-Sc/[Ph₃C][B(C₆F₅)₄] or 2-Y, 2-La olefin hydrogenation occurred with quantitative conversion.

Rare Earth Starting Materials and Methodologies for Synthetic Chemistry

The number of rare earth (RE) starting materials used in synthesis is staggering, ranging from simple binary metal-halide salts to borohydrides and "designer reagents" such as alkyl and organoaluminate complexes. This review collates the most important starting materials used in RE synthetic chemistry, including essential information on their preparations and uses in modern synthetic methodologies. The review is divided by starting material category and supporting ligands (i.e., metals as synthetic precursors, halides, borohydrides, nitrogen donors, oxygen donors, triflates, and organometallic reagents), and in each section relevant synthetic methodologies and applications are discussed.

Temperature triggered alternating copolymerization of epoxides and lactones via pre-sequenced spiroorthoester intermediates

We report the alternating copolymerization of caprolactone and epoxide through the in situ formation of pre-sequenced spiroorthoester monomer. The reaction is catalyzed by the temperature triggered, bifunctional cationic indium complex (±)-[(NN_iO_tBu)In(CH₂SiMe₃)][B(C₆F₅)₄] (1). 1 can catalyze the coupling of epoxide and lactone to form spiroorthoester at 60 °C and its double ring-opening polymerization at 110 °C to form poly(ether-alt-ester). The post-polymerization modification and degradation of the poly(ether-alt-ester) are further investigated.

We report the alternating copolymerization of caprolactone and epoxide through the in situ formation of pre-sequenced spiroorthoester monomer.

Design of selective divalent chain transfer agent for coordinative chain transfer polymerization of ethylene and its copolymerization with butadiene

PhMg(CH2)5MgPh and MesMg(CH2)5MgMes – divalent bis-metalated chain transfer agents (CTA) – were designed, synthesized and implemented in the polymerization of ethylene or the copolymerization of ethylene with butadiene mediated by...

Access to Derivatizable Octahydrofluorenyl Ligand: Half-Sandwich Rare-Earth Metal Complexes for Highly Syndiospecific (Co)Polymerization of Styrene

A simple and facile synthetic pathway for accessing new derivatizable bulky-demanding octahydrofluorenyl (OHF) ligands has been developed, and a series of half-sandwich rare-earth metal (Sc, Y, Lu) complexes bearing the OHF ancillary ligands have been synthesized. In conjunction with a borate, the OHF-ligated Sc complexes exhibited high catalytic activity for styrene (co)polymerization to afford polymers with highly syndiotactic polystyrene sequence (>99% rrrr).

One-pot synthesis of cobalt complexes with 2,6-bis(arylimino)phenoxyl/phenthioxyl ligands and catalysis on isoprene polymerization

Several cobalt complexes supported by 2,6-bis(arylimino)phenoxyl/phenthioxyl ligands κ2N,X-Ar[NXN]CoCl(THF) (1a, X = O, Ar = 2,6-Me2C6H3; 1b, X = O, Ar = 2,6-iPr2C6H3; 2a, X = S, Ar = 2,6-Me2C6H3; 2b, X = S, Ar = 2,6-iPr2C6H3) were synthesized by direct oxygen(sulfur) insertion into the C-Co bond of the mixed-valence cobalt complexes {κ2C,N,η6-Ar[NCN]Co-κN-CoCl(μ-Cl)}2. Crystallization of 1b in the presence of water gave the hydrolysis product 1b'. Treatment of Ar[NCN]Li with dioxygen followed by the addition of CoCl2 afforded the heteroatomic complexes {κ2N,O-Ar[NON]Co(μ-Cl)2Li}2 (3a, Ar = 2,6-Me2C6H3; 3b, Ar = 2,6-iPr2C6H3) or κ2N,O-Ar[NON]Co2Cl2(μ-Cl)2Li(THF)2 (4a, Ar = 2,6-Me2C6H3; 4b, Ar = 2,6-iPr2C6H3) depending on the amount of CoCl2 used. The Co(iii)/Li heterometallic complex 3b' with imino-phenoxyl-amino ligands was formed probably via a redox reaction of 3b. The reactions of Ar[NCN]Li with elemental sulfur and CoCl2 gave κ2N,S-Ar[NSN]Co2Cl2(μ-Cl)2Li(THF)2 (5a, Ar = 2,6-Me2C6H3; 5b, Ar = 2,6-iPr2C6H3) respectively. These complexes were well characterized by FT-IR and elemental analyses, and the molecular structures of 1b', 3b', 4a, and 4b were confirmed by X-ray crystallography. Upon activation with Al2Et3Cl3 in toluene, these complexes showed high activities in isoprene polymerization affording cis-1,4 enriched polymers with a moderate molecular weight (0.85-4.72 × 104 Da).

Comparative Analysis of Ethylene/Diene Copolymerization and Ethylene/Propylene/Diene Terpolymerization Using Ansa-Zirconocene Catalyst with Alkylaluminum/Borate Activator: The Effect of Conjugated and Nonconjugated Dienes on Catalytic Behavior and Polymer Microstructure

The copolymerization of ethylene‒diene conjugates (butadiene (BD), isoprene (IP) and nonconjugates (5-ethylidene-2-norbornene (ENB), vinyl norbornene VNB, 4-vinylcyclohexene (VCH) and 1, 4-hexadiene (HD)), and terpolymerization of ethylene-propylene-diene conjugates (BD, IP) and nonconjugates (ENB, VNB, VCH and HD) using two traditional catalysts of C₂-symmetric metallocene—silylene-bridged rac-Me₂Si(2-Me-4-Ph-Ind)₂ZrCl₂ (complex A) and ethylene-bridged rac-Et(Ind)₂ZrCl₂ (complex B)—with a [Ph₃C][B(C₆F₅)₄] borate/TIBA co-catalyst, were intensively studied. Compared to that in the copolymerization of ethylene diene, the catalytic activity was more significant in E/P/diene terpolymerization. We obtained a maximum yield of both metallocene catalysts with conjugated diene between 3.00 × 10⁶ g/mol_Mt·h and 5.00 × 10⁶ g/mol_Mt·h. ENB had the highest deactivation impact on complex A, and HD had the most substantial deactivation effect on complex B. A ¹H NMR study suggests that dienes were incorporated into the co/ter polymers’ backbone through regioselectivity. ENB and VNB, inserted by the edo double bond, left the ethylidene double bond intact, so VCH had an exo double bond. Complex A’s methyl and phenyl groups rendered it structurally stable and exhibited a dihedral angle greater than that of complex B, resulting in 1, 2 isoprene insertion higher than 1, 4 isoprene that is usually incapable of polymerization coordination. High efficiency in terms of co- and ter- monomer incorporation with higher molecular weight was found for complex 1. The rate of incorporation of ethylene and propylene in the terpolymer backbone structure may also be altered by the conjugated and nonconjugated dienes. ¹³C-NMR, ¹H-NMR, and GPC techniques were used to characterize the polymers obtained.

Rigid Acridane-Based Pincer Supported Rare-Earth Complexes for cis-1,4-Polymerization of 1,3-Conjugated Dienes

A convenient synthetic route has been developed for preparing the novel rigid 4,5-(PR₂)2-2,7,9,9-tetramethylacridane-based pincer ligands (^acri-RPNP; R = ⁱPr and Ph), and the first rare-earth (Ln = Y, Lu) alkyl complexes bearing the ^acri-RPNP ligands were synthesized by a salt metathesis reaction (for the isopropyl-substituent ^acri-iPrPNP complexes, 1-Ln) or direct alkylation (for the phenyl-substituent ^acri-PhPNP complexes, 2-Ln). For both 1-Ln and 2-Ln, the NMR spectroscopy and X-ray diffraction study confirmed the successful coordination of the ^acri-RPNP ligand to the central metal ion in a tridentate manner via the two phosphine and the nitrogen donors. In contrast to 1-Ln that are solvent-free complexes, the metal centers in 2-Ln are each coordinated with one tetrahydrofuran molecule. Upon activation by [Ph₃C][B(C₆F₅)₄], 1-Y and 2-Lu could catalyze the living polymerization of isoprene and β-myrcene with high catalytic activity and high cis-1,4-selectivity (up to 92.3% for isoprene and 98.5% for β-myrcene). Moreover, the 1-Y/[Ph₃C][B(C₆F₅)₄] catalytic system also could promote the polymerization of butadiene and its copolymerization with isoprene to produce copolymers with high cis-1,4-selectivity and narrow polydispersity.

Syndiospecific coordination (Co)polymerization of carbazole-substituted styrene derivatives using the scandium catalyst system

Perfect syndiospecific polymerization of carbazole-substituted styrene derivatives was achieved using a rare-earth metal catalyst. Also copolymerization of FSt with styrene afforded copolymers with gradient sequence distributions and easily tunable incorporation rate.

An unsymmetrical binuclear iminopyridine-iron complex and its catalytic isoprene polymerization

A series of chloride-bridged unsymmetrical mixed Fe(ii)-HS/Fe(ii)-LS binuclear structures has been prepared and characterized. Upon activation with MAO, highly efficient catalytic polymerization of isoprene was achieved, delivering an ultra-high molecular weight (catalyst loading = 2.5 ppm, Mn = 1.8 × 106 g mol-1, Mw/Mn = 1.4).

Half-sandwich scandium dibenzyl complexes bearing penta- or tetra-arylcyclopentadienyl ligands: synthesis, structure and syndiospecific styrene polymerization activity

A series of half-sandwich scandium dibenzyl complexes has been synthesized via a reaction of KCp^(Ar*)5 or KCp^Ar5 (Ar* = 3,5-^tBu₂–C₆H₃; Ar = 3,5-ⁱPr₂–C₆H₃) or KCp^(Ar*)4H, KCp^Ar4H and KCp^Ph4H with the cationic scandium complex [Sc(p-CH₂C₆H₄-Me)₂(THF)_x][BPh₄].

Half-sandwich rare-earth metal complexes bearing a C5Me4-C6H4-o-CH2NMe2 ligand: synthesis, characterization and catalytic properties for isoprene, 1-hexene and MMA polymerization

A new ortho-dimethylaminomethylphenyl-tetramethylcyclopentadienyl ligand C₅Me₄H-C₆H₄-o-CH₂NMe₂ (HL) and a series of rare-earth metal complexes bearing this ligand were synthesized. Of these complexes, two binuclear alkyl complexes [(C₅Me₄-C₆H₄-o-CH₂N(Me)CH₂-μ)Ln(CH₂SiMe₃)]₂ (Ln = Sc (1a) and Y (1b)) were obtained from the alkane elimination reaction of the free ligand with Ln(CH₂SiMe₃)₃(THF)₂, followed by an intramolecular C-H activation process of a NMe group in the ligand with a CH₂SiMe₃ group, two binuclear dichloro complexes (C₅Me₄-C₆H₄-o-CH₂NMe₂)₂Y₂Cl₄[LiCl(THF)₂] (2a) and [(C₅Me₄-C₆H₄-o-CH₂NMe₂)LuCl(μ-Cl)]₂ (2b) were synthesized by the reaction of anhydrous yttrium or lutetium trichloride with the lithium salt of the ligand LiL, and the binuclear bis(borohydrido) complexes [(C₅Me₄-C₆H₄-o-CH₂NMe₂)Ln(μ-BH₄)BH₄]₂ (Ln = Sm (3a) and Nd (3b)) were synthesized by the reaction of Ln(BH₄)₃(THF)₃ (Ln = Sm and Nd) with the lithium salt of the ligand. The molecular structures of all complexes 1a, 1b, 2a, 2b, 3a and 3b were determined by single-crystal X-ray crystallography. Upon activation with AlR₃/Ph₃CB(C₆F₅)₄, MAO or MMAO, the binuclear alkyl complexes 1a and 1b show good catalytic activity for isoprene cis-1,4 enriched regioselective polymerization and moderate catalytic activity for 1-hexene polymerization. Complexes 3a and 3b were studied as catalysts for methyl methacrylate polymerization reaction under different conditions and were found to show moderate to high catalytic activity.

Anilido-oxazoline-ligated rare-earth metal complexes: synthesis, characterization and highly cis-1,4-selective polymerization of isoprene

Anilido-oxazoline-ligated rare-earth metal dialkyl complexes have been synthesized and structurally characterized. The complexes exhibited strong fluorescence emissions and good catalytic performance on isoprene polymerization with high cis-1,4-selectivity. The treatment of anilido-oxazoline precursors ortho-C6H4[NH(2,6-R12C6H3)][C[double bond, length as m-dash]NC(R2,R3)CH2O] (R1 = R2 = R3 = Me (HL1); R1 = iPr, R2 = R3 = Me (HL2); R1 = R2 = iPr, R3 = H (HL3); and R1 = iPr, R2 = R3 = H (HL4)) with an equimolar amount of Ln(CH2SiMe3)3(THF)2 (Ln = Sc, Y) afforded rare-earth metal complexes L1-4-Ln(CH2SiMe3)2(THF)n (L1-Sc (1), n = 1; L2-Sc (2), n = 0; L1-Y (3), n = 1; L2-Y (4), n = 1; L3-Y (5), n = 1; and L4-Y (6), n = 1) in good yields. The complexes are stable in both the solid state and solution. Single crystal X-ray diffraction study showed that complexes 1, 3 and 4 exhibit a distorted trigonal bipyramidal configuration, while complex 2 is pseudo-tetrahedral without coordinated THF. The luminescence properties of complexes 1-4 were investigated and the emission maxima were found in the range of 465-477 nm. DFT and TD-DFT studies were carried out to explore their characteristic electronic structures and gain insight into their optical properties. Upon activation with organic borates, the reported complexes exhibited high activity and cis-1,4-selectivity for isoprene polymerization. The nature of the central metal and substituent groups in oxazoline have an influence on the cis-1,4-selectivity.

Influences of Fluorine Substituents on Iminopyridine Fe(II)- and Co(II)-Catalyzed Isoprene Polymerization

A series of iminopyridine complexes of Fe(II) and Co(II) complexes bearing fluorinated aryl substituents were synthesized for the polymerization of isoprene. The structures of complexes 3a, 2b and 3b were determined by X-ray diffraction analysis. Complex 3a contained two iminopyridine ligands coordinated to the iron metal center forming an octahedral geometry, whereas 2b adopted a chloro-bridged dimer, and 3b featured with two patterns of cobalt centers bridged via chlorine atoms. Complexes 2b and 3b represented rare examples of chlorine bridged bimetallic Co(II) complexes. The fluorine substituents effects, particularly on catalytic activity and polymer properties such as molecular weight and regio-/stereo-selectivity were investigated when these complexes were employed for isoprene polymerization. Among the Fe(II)/methylaluminoxane (MAO) systems, the 4-CF₃ substituted iminopyridine Fe(II) complex 1a was found as a highly active isoprene polymerization catalyst exhibiting the highest activity of 10⁶ g·(mol of Fe)-1·h-1. The resultant polymer displayed lower molecular weight (Mn = 3.5 × 10⁴ g/mol) and moderate polydispersity index (PDI = 2.1). Furthermore, the ratio of cis-1,4-/3,4 was not affected by the F substituents. In the series of Co(II)/AlEt₂Cl binary systems, complexes containing electron-withdrawing N-aryl substituents (R = 4-CF₃, 2,6-2F) afforded higher molecular weights polyisoprene than that was obtained by the complex containing electron-donating N-alkyl substituents (R = octyl). However, ternary components system, complex/MAO/[Ph₃C][B(C₆F₅)₄] resulted in low molecular weight polyisoprene (Mn < 2000) with high trans-1,4-unit (>95%).