Controlling the Dynamics of Ionic Liquid Thin Films via Multilayer Surface Functionalization

A quinoline colorimetric ionic liquid probe by electrostatic enhancement for visual detection of Fe3+ in food

Excessive or insufficient iron(Ⅲ) will pose burdens of human body, and its content is the key to control the function of iron-fortified food. In this regard, a functionalized quinoline ionic probe, benefiting from the electrostatic attraction, was designed for the colorimetric detection of Fe3+ in food. This probe formed a 2: 1 complex with Fe3+, altering the UV-vis spectra and solution color. The UV-vis detection limit was 0.2 μM, and visually, the color shifted from light-yellow to dark-green as Fe3+ concentrations increased, with a visual detection limit of 3.4 μM, meeting the maximum acceptable level of 5.4 μM. Noteworthy, ionic liquid-based sensing paper was constructed for rapid, semi-quantitative Fe3+ detection. Furthermore, the satisfying recovery (97.4-102.9 %) was obtained in real samples, showcasing the probe's efficiency. This work demonstrated the potential of ionic liquids for the fast, sensitive, and visual detection of Fe3+, offering a promising direction for metal element sensing platforms.

Evaluating the contributions to conductivity in room temperature ionic liquids

The conductivity of room temperature ionic liquids is not described adequately by the Nernst-Einstein equation, which accounts only for Brownian motion of the ions. We report on the conductivity of the ionic liquid 1-butyl-3-methylimidazolum bis(trifluoromethylsulfonyl) imide (BMIM TFSI), comparing the known conductivity of this RTIL to the diffusion constants of the cationic and anionic species over a range of length scales, using time-resolved fluorescence depolarization and fluorescence recovery after photobleaching (FRAP) measurements of chromophores in the RTIL. Our data demonstrate that the diffusional contribution to molar conductivity is ca. 50%. Another mechanism for the transmission of charged species in RTILs is responsible for the "excess" molar conductivity, and we consider possible contributions.

Structure-Dependence and Mechanistic Insights into the Piezoelectric Effect in Ionic Liquids

We reported recently that two imidazolium room-temperature ionic liquids (RTILs) exhibit the direct piezoelectric effect (J. Phys. Chem. Lett., 2023, 14, 2731-2735). We have subsequently investigated several other RTILs with pyrrolidinium and imidazolium cations and tetrafluoroborate and bis(trifluoromethylsulfonyl)imide anions in an effort to gain insight into the generality and mechanism of the effect. All the RTILs studied exhibit the direct piezoelectric effect, with a magnitude (d33) and threshold force that depend on the structures of both the cation and anion. The structure-dependence and existence of a threshold force for the piezoelectric effect are consistent with a pressure-induced liquid-to-crystalline solid phase transition in the RTILs, and this is consistent with experimental X-ray diffraction data.

Ionic Liquids Exhibit the Piezoelectric Effect

The piezoelectric effect was discovered over a century ago, and it has found wide application since that time. The direct piezoelectric effect is the production of charge upon application of force to a material, and the converse piezoelectric effect is a change in the material dimension(s) upon the application of a potential. To date, piezoelectric effects have been observed only in solid-phase materials. We report here the observation of the direct piezoelectric effect in room-temperature ionic liquids (RTILs). The RTILs 1-butyl-3-methyl imidazolium bis(trifluoromethyl-sulfonyl)imide (BMIM⁺TFSI^-) and 1-hexyl-3-methyl imidazolium bis(trifluoromethylsulfonyl) imide (HMIM⁺TFSI^-) produce a potential upon the application of force when confined in a cell, with the magnitude of the potential being directly proportional to the force applied. The effect is one order of magnitude smaller than that seen in quartz. This is the first report to our knowledge of the direct piezoelectric effect in a neat liquid. Its discovery has fundamental implications about the organization and dynamics in ionic liquids and invites theoretical treatment.

Relating the Induced Free Charge Density Gradient in a Room-Temperature Ionic Liquid to Molecular-Scale Organization

We report on dilution-dependent changes in the local environments of chromophores incorporated into room-temperature ionic liquid (RTIL)-molecular solvent binary systems where the ionic liquid cation and molecular solvent possess the same alkyl chain length. We have used the RTIL 1-decyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (DMPyrr⁺TFSI^-) and the molecular solvent 1-decanol. Perylene was used as a non-polar probe, and cresyl violet (CV⁺) was used as a polar probe chromophore. We observe that in both regions there is a change in the chromophore local environments with increasing 1-decanol content. The changes in the nonpolar regions of the binary RTIL-molecular solvent system occur at a lower 1-decanol concentration than changes in the polar regions. Both chromophores reorient as oblate rotors in this binary system, allowing detailed information on the relative values of the Cartesian components of the rotational diffusion constants to be extracted from the experimental data. The induced free charge density gradient, ρ_f, known to exist in RTILs, persists to high 1-decanol content (1-decanol mole fraction of 0.75), with the structural details of the gradient being reflected in depth-dependent changes in the Cartesian components of the rotational diffusion constants of CV⁺. This is the first time that changes in molecular organization have been correlated with ρ_f.

Immobilizing Ionic Liquids onto Functionalized Surfaces for Sensing Volatile Organic Compounds

Herein, a highly sensitive volatile organic compound (VOC) gas sensor is demonstrated using immobilized ionic liquid (IL), 1-butyl-3-methylimidazolium hexafluorophosphate, onto surfaces functionalized by the quaternary ammonium group -N⁺R, -COOH, and -NH₂, i.e., N⁺-IL, COOH-IL, and NH₂-IL, respectively. These functional groups ensure highly tunable interactions between the IL and surfaces, efficiently modulating the electrical resistance of the immobilized IL upon exposure to acetone and toluene. The immobilized IL to both acetone and toluene displays significant electronic resistance changes at a concentration of 150 ppm, falling in the order NH₂-IL > N⁺-IL > COOH-IL for acetone while COOH-IL > NH₂-IL > N⁺-IL for toluene. A better gaseous sensing ability is achieved in COOH-IL for toluene than acetone, while this does not hold in the case of NH₂-IL and N⁺-IL surfaces because of the completely different ion structuring of the IL at these functionalized surfaces. The accelerated ion mobility in the IL that is immobilized onto functionalized surfaces is also responsible for the strong gaseous sensing response, which is demonstrated further by the atomic force microscopy-measured smaller friction coefficient. This is highly encouraging and suggests that ILs can be immobilized by a network formed by surface functionalization to easily and cheaply detect VOCs at ppm concentrations.

Cation structure-dependence of the induced free charge density gradient in imidazolium and pyrrolidinium ionic liquids

We report on the structure-dependence and magnitude of the induced free charge density gradient (ρ_f) seen in room-temperature ionic liquids (RTILs) with imidazolium and pyrrolidinium cations. We characterize the spatially-resolved rotational diffusion dynamics of a trace-level cationic chromophore to characterize ρ_f in three different pyrrolidinium RTILs and two imidazolium RTILs. Our data show that the magnitude of ρ_f depends primarily on the alkyl chain length of RTIL cation and the persistence length of ρ_f is independent of RTILs' cation structure. These findings collectively suggest that mesoscopic structure in RTILs plays a significant role in allowing charge density gradients to form.

Cation structure-dependence of the Pockels effect in aprotic ionic liquids

We report on the dependence of surface charge-induced birefringence (the Pockels effect) in room temperature ionic liquids (RTILs) with different cation constituents. The induced birefringence is related to the induced free charge density gradient (ρ_f) in the RTIL. The RTILs are confined in a lens-shaped cell and the surface charge density of the concave cell surface is controlled by the current passed through the surface ITO film. We find that, in all cases, the induced birefringence is proportional to the surface charge density and that the change in refractive index nearest the ITO surface can be on the order of 20%. Our findings indicate that the induced birefringence depends more sensitively on the cation aliphatic substituent length than on the identity of the charge-carrying headgroup.

Ligand Dynamics Time Scales Identify the Surface-Ligand Interactions in Thiocyanate-Capped Cadmium Sulfide Nanocrystals

The nanocrystal surface, which acts as an interface between the semiconductor lattice and the capping ligands, plays a significant role in the attractive photophysical properties of semiconductor nanocrystals for use in a wide range of applications. Replacing the long-chain organic ligands with short inorganic variants improves the conductivity and carrier mobility of nanocrystal-based devices. However, our current understanding of the interactions between the inorganic ligands and the nanocrystals is obscure due to the lack of experiments to directly probe the inorganic ligands. Herein, using two-dimensional infrared spectroscopy, we show that the variations in the inorganic ligand dynamics within the heterogeneous nanocrystal ensemble can identify the diversities in the inorganic ligand-nanocrystal interactions. The ligand dynamics time scale in SCN^- capped CdS nanocrystals identifies three distinct ligand populations and provides molecular insight into the nanocrystal surface. Our results demonstrate that the SCN^- ligands engage in a dynamic equilibrium and stabilize the nanocrystals by neutralizing the surface charges through both direct binding and electrostatic interaction.

The effect of dilution on induced free charge density gradients in room temperature ionic liquids

We report on changes in the magnitude and length scale of the induced free charge density gradient, ρ_f, in three imidazolium room temperature ionic liquids (RTILs) with dilution by methanol and acetonitrile. Using depth- and time-resolved fluorescence measurements of cresyl violet rotational diffusion, we find that ρ_f persists in RTILs to varying degrees depending on RTIL and diluent identity, and in all cases the functional form of ρ_f is not a smooth monotonic diminution in either magnitude or persistence length with increasing diluent, but a stepwise collapse. This finding is consistent with changes in the bulk RTIL as a function of dilution seen using rotational diffusion measurements that show the rotating entity in bulk RTILs exhibits a larger effective hydrodynamic volume than would be expected based on bulk viscosity data for the diluted RTILs. This excess hydrodynamic volume can be understood in the context of aggregation of RTIL ion pairs in the diluted RTIL system. The size of the aggregates is seen to depend on RTIL identity and diluent, and in all cases aggregate size increases with increasing dilution. This finding is consistent with the ρ_f dependence on dilution data. The collapse of ρ_f is seen to correlate with the onset of RTIL ion pair dimer formation, a condition that may facilitate dissociated RTIL ion mobility in the binary system.

CD Stretching Modes are Sensitive to the Microenvironment in Ionic Liquids

Knowledge of the structure of the electrical double layer in ionic liquids (IL) is crucial for their applications in electrochemical technologies. We report the synthesis and applicability of an imidazolium-based amphiphilic ionic liquid with a perdeuterated alkyl chain for studies of electric potential-dependent rearrangements, and changes in the microenvironment in a monolayer on a Au(111) surface. Electrochemical measurements show two states of the organization of ions on the electrode surface. In situ IR spectroscopy shows that the alkyl chains in imidazolium cations change their orientation depending on the adsorption state. The methylene-d2 stretching modes in the perdeuterated IL display a reversible, potential-dependent appearance of a new band. The presence of this mode also depends on the anion in the IL. Supported by quantum chemical calculations, this new mode is assigned to a second νas (CD2 ) band in alkyl-chain fragments embedded in a polar environment of the anions/solvent present in the vicinity of the imidazolium cation and electrode. It is a measure of the potential-dependent segregation between polar and nonpolar environments in the layers of an IL closest to the electrode.

Least-Squares Fitting of Multidimensional Spectra to Kubo Line-Shape Models

We report a comprehensive study of the efficacy of least-squares fitting of multidimensional spectra to generalized Kubo line-shape models and introduce a novel least-squares fitting metric, termed the scale invariant gradient norm (SIGN), that enables a highly reliable and versatile algorithm. The precision of dephasing parameters is between 8× and 50× better for nonlinear model fitting compared to that for the centerline-slope (CLS) method, which effectively increases data acquisition efficiency by 1–2 orders of magnitude. Whereas the CLS method requires sequential fitting of both the nonlinear and linear spectra, our model fitting algorithm only requires nonlinear spectra but accurately predicts the linear spectrum. We show an experimental example in which the CLS time constants differ by 60% for independent measurements of the same system, while the Kubo time constants differ by only 10% for model fitting. This suggests that model fitting is a far more robust method of measuring spectral diffusion than the CLS method, which is more susceptible to structured residual signals that are not removable by pure solvent subtraction. Statistical analysis of the CLS method reveals a fundamental oversight in accounting for the propagation of uncertainty by Kubo time constants in the process of fitting to the linear absorption spectrum. A standalone desktop app and source code for the least-squares fitting algorithm are freely available, with example line-shape models and data. We have written the MATLAB source code in a generic framework where users may supply custom line-shape models. Using this application, a standard desktop fits a 12-parameter generalized Kubo model to a 10⁶ data-point spectrum in a few minutes.

Charge-Induced Birefringence in a Room-Temperature Ionic Liquid

We have reported previously on the existence of a surface charge-induced free charge density gradient (ρ_f) in room-temperature ionic liquids (RTILs) with a characteristic persistence length of ca. 50 μm [Ma, K. Langmuir 2016, 32, 9507-9512]. The free charge density gradient is related to the dielectric response of the RTIL. We report here on the existence of a surface charge-induced gradient in the RTIL refractive index and quantify the relationship between the index gradient and ρ_f. Because ρ_f is uniaxial, the induced refractive index gradient is manifested as an induced birefringence. The RTIL sample holder has a curved surface such that the RTIL can function as a lens, and ρ_f is controlled by the surface charge density (σ_s) of the (concave) RTIL support. Current passed through an indium-doped tin oxide (ITO) surface layer on the support surface controls σ_s. The far-field image of light passed through the RTIL lens as a function of σ_s is used to measure the charge-induced changes of n in the RTIL. We demonstrate a modulation of the refractive index on the order of 15%, proportional to σ_s. This report places the relationship between ρ_f and RTIL dielectric response on a quantitative footing and suggests the utility of RTILs for electro-optic applications.

Local and Long-Range Organization in Room Temperature Ionic Liquids

Room temperature ionic liquids (RTILs) have a wide range of current and potential applications, in areas ranging from supercapacitor energy storage to sequestration of toxic gas phase species and use as reusable solvents for selected organic reactions. All these applications stem from their unique physical and chemical properties, which remain understood to only a limited extent. Among the issues of greatest importance is the extent to which RTILs exist as dissociated ionic species and the length scales over which some types of organizations are seen to exist in them. In this Invited Feature Article, we review the current understanding of organization in this family of materials, where opportunities lie in terms of deepening our understanding, and what potential applications would benefit from gaining such knowledge.