C-H Amination Mediated by Cobalt Organoazide Adducts and the Corresponding Cobalt Nitrenoid Intermediates

Iron-catalysed intramolecular C(sp3)-H amination of alkyl azides

Iron-catalysed intramolecular C(sp3)-H amination of alkyl azides (N3R, R = alkyl) via the iron-alkylnitrene/alkylimido (Fe(NR)) intermediate, is an appealing synthetic approach for the synthesis of various N-heterocycles. This approach provides a direct atom-economy strategy for constructing C(sp3)-N bonds, with nitrogen gas as the only by-product and iron is a biocompatible, cheap, and earth-abundant metal. However, C(sp3)-H amination with alkyl azides is challenging because alkyl nitrenes readily undergo 1,2-hydride migration to imines. This article summarizes recent major advances in this field in terms of catalyst design, substrate scope expansion, stereoselectivity control, understanding of key reaction intermediates, and applications in the synthesis of complex natural products and pharmaceuticals.

Two-Electron Oxidative Atom and Group Transfer Reactions at a Well-Defined Uranium(II) Center

The multi-electron redox chemistry of uranium(II) compounds remains largely unexplored. Herein, we report a series of two-electron oxidative atom and group transfer reactions at a well-defined uranium(II) center. The reactions of uranium(II) complexes [M][(AdTPBN3)U] (M=K(2,2,2-cryptand) and K(18-crown-6)(THF)) with pyridine-N-oxide or nitrosobenzene, elemental sulfur/selenium or triphenylphosphine sulfide/selenide, and ditellurium salt led to the isolation of uranium(IV) terminal oxo and chalcogenido complexes [M][(AdTPBN3)UX] (X=O, S, Se, Te). In addition, the reactions of [M][(AdTPBN3)U] with aryl azides ArN3 or diazoalkanes R2CN2 quantitatively yielded uranium(IV) terminal imido [M][(AdTPBN3)UNAr] or hydrazonido(2-) complexes [M][(AdTPBN3)UN2CR2], respectively. Notably, the low-temperature reaction between [M][(AdTPBN3)U] and mesityl azide allowed the isolation of the first uranium(IV) aryldiazenylimido complex as an intermediate. These uranium(IV)-element multiply bound compounds were fully characterized by X-ray crystallography, 1H NMR spectroscopy, absorption spectroscopy, solution and solid-state magnetometry, and elemental analysis. The controlled two-electron oxidative reactions at a uranium(II) center not only expand the redox reactivity of uranium(II) but also offer a convenient new route to access uranium-element multiply bound compounds.

Photoinduced Group Transposition via Iridium-Nitrenoid Leading to Amidative Inner-Sphere Aryl Migration

We herein report a fundamental mechanistic investigation into photochemical metal-nitrenoid generation and inner-sphere transposition reactivity using organometallic photoprecursors. By designing Cp*Ir(hydroxamate)(Ar) complexes, we induced photo-initiated ligand activation, allowing us to explore the amidative σ(Ir-aryl) migration reactivity. A combination of experimental mechanistic studies, femtosecond transient absorption spectroscopy, and density functional theory (DFT) calculations revealed that the metal-to-ligand charge transfer enables the σ(N-O) cleavage, followed by Ir-acylnitrenoid generation. The final inner-sphere σ(Ir-aryl) group migration results in a net amidative group transposition.

Square-planar imido complexes of cobalt: synthesis, reactivity and computational study

Treatment of [Co(N2)(tBuPNP)] (tBuPNP = anion of 2,5-bis(di-tert-butylphosphinomethyl)pyrrole) with one equivalent of an aryl azide generates the four-coordinate imido complexes [Co(NAr)(tBuPNP)] (Ar = mesityl, phenyl, or 4-tBu-phenyl). X-ray crystallographic analysis of the compounds shows an unusual square-planar geometry about cobalt with nearly linear imido units. In the presence of the hydrogen atom donor, TEMPOH, [Co(NPh)(tBuPNP)] undergoes addition of the H atom to the imido nitrogen to generate the corresponding amido complex, [Co(NHPh)(tBuPNP)], whose structure and composition were verified by independent synthesis. Despite the observation of H atom transfer reactivity with TEMPOH, the imido complexes do not show catalytic activity for C-H amination or aziridination for several substrates examined. In the case of [Co(NPh)(tBuPNP)], addition of excess azide produced the tetrazido complex, [Co(N4Ph2)(tBuPNP)], whose bond metrics were most consistent with an anionic Ph2N4 ligand. Density Functional Theory (DFT) investigations of the imido and tetrazido species suggest that they adopt a ground state best described as possessing a low-spin cobalt(II) ion ferromagnetically coupled to an iminyl radical.

Deciphering Iron-Catalyzed C-H Amination with Organic Azides: N2 Cleavage from a Stable Organoazide Complex

Catalytic C-N bond formation by direct activation of C-H bonds offers wide synthetic potential. En route to C-H amination, complexes with organic azides are critical precursors towards the reactive nitrene intermediate. Despite their relevance, α-N coordinated organoazide complexes are scarce in general, and elusive with iron, although iron complexes are by far the most active catalysts for C-H amination with organoazides. Herein, we report the synthesis of a stable iron α-N coordinated organoazide complex from [Fe(N(SiMe3 )2 )2 ] and AdN3 (Ad=1-adamantyl) and its crystallographic, IR, NMR and zero-field 57 Fe Mössbauer spectroscopic characterization. These analyses revealed that the organoazide is in fast equilibrium between the free and coordinated state (Keq =62). Photo-crystallography experiments showed gradual dissociation of N2 , which imparted an Fe-N bond shortening and correspond to structural snapshots of the formation of an iron imido/nitrene complex. Reactivity of the organoazide complex in solution showed complete loss of N2 , and subsequent formation of a C-H aminated product via nitrene insertion into a C-H bond of the N(SiMe3 )2 ligand. Monitoring this reaction by 1 H NMR spectroscopy indicates the transient formation of the imido/nitrene intermediate, which was supported by Mössbauer spectroscopy in frozen solution.

Synthesis and Structures of Lead(II) Complexes with Substituted Derivatives of the Closo-Decaborate Anion with a Pendant N3 Group

In this work, we studied lead(II) and cobalt(II) complexation of derivatives [2-B10H9O(CH2)2O(CH2)2N3]2- and [2-B10H9O(CH2)5N3]2- of the closo-decaborate anion containing pendant azido groups in the presence of 1,10-phenanthroline and 2,2'-bipyridyl. Mononuclear [PbL2{An}] and binuclear [Pb2L4(NO3)2{An}] lead complexes (where {An} is the N3-substituted boron cluster) were isolated and studied by IR spectroscopy and elemental analysis. The mononuclear lead(II) complex [Pb(phen)2[B10H9O(CH2)2O(CH2)2N3] and the binuclear lead(II) complex [Pb2(phen)4(NO3)2[B10H9O(CH2)5)N3] were determined by single-crystal X-ray diffraction. In complex [Pb2(phen)4(NO3)2[B10H9O(CH2)5)N3], the boron cluster is coordinated by the metal atom only via the 3c2e MHB bonds. In complex [Pb(phen)2[B10H9O(CH2)2O(CH2)2N3], the coordination environment of the metal includes BH groups of the boron cluster and the oxygen atom of the exo-polyhedral substituent. When the reaction was performed in a CH3CN/water mixture, the binuclear lead(II) complex [(Pb(bipy)NO3)(Pb(bipy)2NO3)(B10H9O(CH2)2O(CH2)2N3)]·CH3CN·H2O was isolated, where the boron cluster acts as a bridging ligand between lead atoms coordinated by the boron cage via the O atoms of the substituent and/or the BH groups. In the course of cobalt(II) complexation, the starting compound (Ph4P)2[B10H9O(CH2)5N3] was isolated and its structure was also determined by X-ray diffraction. Although a number of lead(II) complexes with coordinated N3 are known from the literature, no complexes with the boron cluster coordinated by the pendant N3 group involved in the metal coordination have been isolated.

Recent advances in metal directed C-H amidation/amination using sulfonyl azides and phosphoryl azides

Transition metal-catalyzed C-N bond formation reactions have gained popularity as a method for selectively transforming common C-H bonds into N-functionalized molecules. This approach is particularly useful for synthesizing aminated molecules, which require aminating reagents and amidated building blocks. Over the past two decades, significant advancements have been achieved in transition-metal-catalyzed C-H functionalization, with organic azides emerging as promising amino sources and internal oxidants. This review focuses on recent developments in utilizing sulfonyl and phosphoryl azides as building blocks for directed intra- and intermolecular C-H functionalization reactions. Specifically, it discusses methods for synthesizing sulfonamidates and phosphoramidates using sulfonyl and phosphoryl azides, respectively. The article highlights the potential of C-H functionalization reactions with organic azides for efficiently and sustainably synthesizing N-functionalized molecules, providing valuable insights into the latest advancements in this field.

Nitrene transfer from a sterically confined copper nitrenoid dipyrrin complex

Despite the myriad Cu-catalyzed nitrene transfer methodologies to form new C-N bonds (e.g., amination, aziridination), the critical reaction intermediates have largely eluded direct characterization due to their inherent reactivity. Herein, we report the synthesis of dipyrrin-supported Cu nitrenoid adducts, investigate their spectroscopic features, and probe their nitrene transfer chemistry through detailed mechanistic analyses. Treatment of the dipyrrin CuI complexes with substituted organoazides affords terminally ligated organoazide adducts with minimal activation of the azide unit as evidenced by vibrational spectroscopy and single crystal X-ray diffraction. The Cu nitrenoid, with an electronic structure most consistent with a triplet nitrene adduct of CuI, is accessed following geometric rearrangement of the azide adduct from κ1-N terminal ligation to κ1-N internal ligation with subsequent expulsion of N2. For perfluorinated arylazides, stoichiometric and catalytic C-H amination and aziridination was observed. Mechanistic analysis employing substrate competition reveals an enthalpically-controlled, electrophilic nitrene transfer for primary and secondary C-H bonds. Kinetic analyses for catalytic amination using tetrahydrofuran as a model substrate reveal pseudo-first order kinetics under relevant amination conditions with a first-order dependence on both Cu and organoazide. Activation parameters determined from Eyring analysis (ΔH‡ = 9.2(2) kcal mol-1, ΔS‡ = -42(2) cal mol-1 K-1, ΔG‡298K = 21.7(2) kcal mol-1) and parallel kinetic isotope effect measurements (1.10(2)) are consistent with rate-limiting Cu nitrenoid formation, followed by a proposed stepwise hydrogen-atom abstraction and rapid radical recombination to furnish the resulting C-N bond. The proposed mechanism and experimental analysis are further corroborated by density functional theory calculations. Multiconfigurational calculations provide insight into the electronic structure of the catalytically relevant Cu nitrene intermediates. The findings presented herein will assist in the development of future methodology for Cu-mediated C-N bond forming catalysis.

A low-coordinate iron organoazide complex

A labile organoazide iron complex is reported. Under ambient conditions, the azide adduct is subject to a dissociation equilibrium in solution, yet also undergoes intramolecular C-H bond amination. Single-crystal irradiation of the azide at 80 K leads to partial N2-extrusion and formation of a putative imido iron intermediate, which was computationally identified as a highly covalent {FeNR}8 species.

Mechanistic snapshots of rhodium-catalyzed acylnitrene transfer reactions

Rhodium acylnitrene complexes are widely implicated in catalytic C-H amidation reactions but have eluded isolation and structural characterization. To overcome this challenge, we designed a chromophoric octahedral rhodium complex with a bidentate dioxazolone ligand, in which photoinduced metal-to-ligand charge transfer initiates catalytic C-H amidation. X-ray photocrystallographic analysis of the Rh-dioxazolone complex allowed structural elucidation of the targeted Rh-acylnitrenoid and provided firm evidence that the singlet nitrenoid species is primarily responsible for acylamino transfer reactions. We also monitored in crystallo reaction of a nucleophile with the in situ generated Rh-acylnitrenoid, providing a crystallographically traceable reaction system to capture mechanistic snapshots of nitrenoid transfer.

Discovery of a simple iron catalyst reveals the intimate steps of C-H amination to form C-N bonds

Formation of ubiquitous C-N bonds traditionally uses prefunctionalized carbon precursors. Recently, metal-catalyzed amination of unfunctionalized C-H bonds with azides has become an attractive and atom-economic strategy for C-N bond formation, though all catalysts contain sophisticated ligands. Here, we report Fe(HMDS)2 (HMDS = N(SiMe3)2 -) as an easy-to-prepare catalyst for intramolecular C-H amination. The catalyst shows unprecedented turnover frequencies (110 h-1 vs. 70 h-1 reported to date) and requires no additives. Amination is successful for benzylic and aliphatic C-H bonds (>80% yield) and occurs even at room temperature. The simplicity of the catalyst enabled for the first time comprehensive mechanistic investigations. Kinetic, stoichiometric, and computational studies unveiled the intimate steps of the C-H amination process, including the resting state of the catalyst and turnover-limiting N2 loss of the coordinated azide. The high reactivity of the iron imido intermediate is rationalized by its complex spin system revealing imidyl and nitrene character.

From the bottle: simple iron salts for the efficient synthesis of pyrrolidines via catalytic C-H bond amination

Commercially available iron salts FeX2 are remarkably active catalysts for pyrrolidine formation from organic azides via direct C-H bond amination. With FeI2, amination is fast and selective, (<30 min for 80% yield at 2 mol% loading), TONs up to 370 are reached with just 0.1 mol% catalyst, different functional groups are tolerated, and a variety of C-H bonds were activated.

Metal-Support Interactions in Molecular Single-Site Cluster Catalysts

This study provides atomistic insights into the interface between a single-site catalyst and a transition metal chalcogenide support and reveals that peak catalytic activity occurs when edge/support redox cooperativity is maximized. A molecular platform MCo₆Se₈(PEt₃)₄(L)₂ (1-M, M = Cr, Mn, Fe, Co, Cu, and Zn) was designed in which the active site (M)/support (Co₆Se₈) interactions are interrogated by systematically probing the electronic and structural changes that occur as the identity of the metal varies. All 3d transition metal 1-M clusters display remarkable catalytic activity for coupling tosyl azide and tert-butyl isocyanide, with Mn and Co derivatives showing the fastest turnover in the series. Structural, electronic, and magnetic characterization of the clusters was performed using single crystal X-ray diffraction, ¹H and ³¹P nuclear magnetic resonance spectroscopy, electronic absorption spectroscopy, cyclic voltammetry, and computational methods. Distinct metal/support redox regimes can be accessed in 1-M based on the energy of the edge metal's frontier orbitals with respect to those of the cluster support. As the degree of electronic interaction between the edge and the support increases, a cooperative regime is reached wherein the support can deliver electrons to the catalytic site, increasing the reactivity of key metal-nitrenoid intermediates.

Umpolung in a Pair of Cobalt(III) Terminal Imido/Imidyl Complexes

Reaction of the CoI complex [(TIMMNmes )CoI ](PF6 ) (1) (TIMMNmes =tris-[2-(3-mesityl-imidazolin-2-ylidene)-methyl]amine) with mesityl azide yields the CoIII imide [(TIMMNmes )CoIII (NMes)](PF6 ) (2). Oxidation of 2 with [FeCp2 ](PF6 ) provides access to a rare CoIII imidyl [(TIMMNmes )Co(NMes)](PF6 )2 (3). Single-crystal X-ray diffractometry and EPR spectroscopy confirm the molecular structure of 3 and its S= 1 / 2 ground state. ENDOR, X-ray absorption spectroscopy and computational analyses indicate a ligand-based oxidation; thus, an imidyl-radical electronic structure for 3. Migratory insertion of one ancillary NHC to the imido ligand in 2 gives the CoI N-heterocyclic imine (4) within 12 h. Conversely, it takes merely 0.5 h for 3 to transform to the CoII congener (5). The migratory insertion in 2 occurs via a nucleophilic attack of the imido ligand at the NHC to give 4, whereas in 3, a nucleophilic attack of the NHC at the electrophilic imidyl ligand yields 5. The reactivity shunt upon oxidation of 2 to 3 confirms an umpolung of the imido ligand.

Csp2-H Amination Reactions Mediated by Metastable Pseudo-Oh Masked Aryl-CoIII-nitrene Species

Cobalt-catalyzed C–H amination via M-nitrenoid species is spiking the interest of the research community. Understanding this process at a molecular level is a challenging task, and here we report a well-defined macrocyclic system featuring a pseudo-O_h aryl-Co^III species that reacts with aliphatic azides to effect intramolecular C_sp2–N bond formation. Strikingly, a putative aryl-Co=NR nitrenoid intermediate species is formed and is rapidly trapped by a carboxylate ligand to form a carboxylate masked-nitrene, which functions as a shortcut to stabilize and guide the reaction to productive intramolecular C_sp2–N bond formation. On one hand, several intermediate species featuring the C_sp2–N bond formed have been isolated and structurally characterized, and the essential role of the carboxylate ligand has been proven. Complementarily, a thorough density functional theory study of the C_sp2–N bond formation mechanism explains at the molecular level the key role of the carboxylate-masked nitrene species, which is essential to tame the metastability of the putative aryl-Co^III=NR nitrene species to effectively yield the C_sp2–N products. The solid molecular mechanistic scheme determined for the C_sp2–N bond forming reaction is fully supported by both experimental and computation complementary studies.

A well-defined pseudo-O_h aryl-Co^III species reacts with aliphatic azides to effect intramolecular C_sp2−N bond formation via a carboxylate masked-Co^III-nitrene, which serves as a shortcut to guide the reaction to productive C_sp2−N bond formation.

Nitrogen Atom Transfer Catalysis by Metallonitrene C-H Insertion: Photocatalytic Amidation of Aldehydes

C-H amination and amidation by catalytic nitrene transfer are well-established and typically proceed via electrophilic attack of nitrenoid intermediates. In contrast, the insertion of (formal) terminal nitride ligands into C-H bonds is much less developed and catalytic nitrogen atom transfer remains unknown. We here report the synthesis of a formal terminal nitride complex of palladium. Photocrystallographic, magnetic, and computational characterization support the assignment as an authentic metallonitrene (Pd-N) with a diradical nitrogen ligand that is singly bonded to PdII . Despite the subvalent nitrene character, selective C-H insertion with aldehydes follows nucleophilic selectivity. Transamidation of the benzamide product is enabled by reaction with N3 SiMe3 . Based on these results, a photocatalytic protocol for aldehyde C-H trimethylsilylamidation was developed that exhibits inverted, nucleophilic selectivity as compared to typical nitrene transfer catalysis. This first example of catalytic C-H nitrogen atom transfer offers facile access to primary amides after deprotection.

An Isolable Azide Adduct of Titanium(II) Follows Bifurcated Deazotation Pathways to an Imide

AdN₃ (Ad = 1-adamantyl) reacts with the tetrahedral Ti^II complex [(Tp^tBu,Me)TiCl] (Tp^tBu,Me = hydrotris(3-tert-butyl-5-methylpyrazol-1-yl)borate) to generate a mixture of an imide complex, [(Tp^tBu,Me)TiCl(NAd)] (4), and an unusual and kinetically stable azide adduct of the group 4 metal, namely, [(Tp^tBu,Me)TiCl(γ-N₃Ad)] (3). In these conversions, the product distribution is determined by the relative concentration of reactants. In contrast, the azide adduct 3 forms selectively when a masked Ti^II complex (N₂ or AdNC adduct) reacts with AdN₃. Upon heating, 3 extrudes dinitrogen in a unimolecular process proceeding through a titanatriazete intermediate to form the imide complex 4, but the observed thermal stability of the azide adduct (t_1/2 = 61 days at 25 °C) is at odds with the large fraction of imide complex formed directly in reactions between AdN₃ and [(Tp^tBu,Me)TiCl] at room temperature (∼50% imide with a 1:1 stoichiometry). A combination of theoretical and experimental studies identified an additional deazotation pathway, proceeding through a bimetallic complex bridged by a single azide ligand. The electronic origin of this deazotation mechanism lies in the ability of azide adduct 3 to serve as a π-backbonding metallaligand toward free [(Tp^tBu,Me)TiCl]. These findings unveil a new class of azide-to-imide conversions for transition metals, highlighting that the mechanisms underlying this common synthetic methodology may be more complex than conventionally assumed, given the concentration dependence in the conversion of an azide into an imide complex. Lastly, we show how significantly different AdN₃ reacts when treated with [(Tp^tBu,Me)VCl].

A soluble iron(II)-phthalocyanine-catalyzed intramolecular C(sp3)-H amination with alkyl azides

Herein, we describe a soluble iron(II)-phthalocyanine, [Fe^II(^tBu₄Pc)(py)₂] (Pc = phthalocyaninato(2-)), as an effective catalyst in intramolecular C(sp³)-H bond amination, with alkyl azides as the nitrogen source, to afford the amination products in moderate to excellent yields with a broad substrate scope.

Copper-Nitrene-Catalyzed Desymmetric Oxaziridination/1,2-Alkyl Rearrangement of 1,3-Diketones toward Bicyclic Lactams

Although copper-nitrene has been extensively studied as a versatile active species in various transformations, asymmetric reactions involving copper-nitrene have been limited to the aziridination of olefins. Herein, we report the novel copper-nitrene-catalyzed desymmetric oxaziridination reaction of cyclic diketones with alkyl azides and the subsequent rearrangement of the resulting highly active intermediate, which produces a synthetically challenging chiral bicyclic lactam containing a quaternary carbon center. This procedure not only enriches the copper-nitrene-catalyzed asymmetric reactions, but also provides an alternative strategy to address the inherent challenges of catalytic asymmetric Schmidt reactions. This unique reaction could inspire the investigation of novel copper-nitrene-catalyzed asymmetric transformations and their reaction mechanisms.

Homogeneous catalytic C(sp3)-H functionalization of gaseous alkanes

The conversion of light alkanes into bulk chemicals is becoming an important challenge as it effectively avoids the use of prefunctionalized alkylating reagents. The implementation of such processes is, however, hampered by their gaseous nature and low solubility, as well as the low reactivity of the C-H bonds. Efforts have been made to enable both polar and radical processes to activate these inert compounds. In addition, these methodologies also benefit significantly from the development of a suitable reactor technology that intensifies gas-liquid mass transfer. In this review, we critically highlight these developments, both from a conceptual and a practical point of view. The recent expansion of these mechanistically-different methods have enabled the use of various gaseous alkanes for the development of different bond-forming reactions, including C-C, C-B, C-N, C-Si and C-S bonds.

Is the Electrophilicity of the Metal Nitrene the Sole Predictor of Metal-Mediated Nitrene Transfer to Olefins? Secondary Contributing Factors as Revealed by a Library of High-Spin Co(II) Reagents

Recent research has highlighted the key role played by the electron affinity of the active metal-nitrene/imido oxidant as the driving force in nitrene additions to olefins to afford valuable aziridines. The present work showcases a library of Co(II) reagents that, unlike the previously examined Mn(II) and Fe(II) analogues, demonstrate reactivity trends in olefin aziridinations that cannot be solely explained by the electron affinity criterion. A family of Co(II) catalysts (17 members) has been synthesized with the assistance of a trisphenylamido-amine scaffold decorated by various alkyl, aryl, and acyl groups attached to the equatorial amidos. Single-crystal X-ray diffraction analysis, cyclic voltammetry and EPR data reveal that the high-spin Co(II) sites (S = 3/2) feature a minimal [N3N] coordination and span a range of 1.4 V in redox potentials. Surprisingly, the Co(II)-mediated aziridination of styrene demonstrates reactivity patterns that deviate from those anticipated by the relevant electrophilicities of the putative metal nitrenes. The representative L4Co catalyst (-COCMe3 arm) is operating faster than the L8Co analogue (-COCF3 arm), in spite of diminished metal-nitrene electrophilicity. Mechanistic data (Hammett plots, KIE, stereocontrol studies) reveal that although both reagents follow a two-step reactivity path (turnover-limiting metal-nitrene addition to the C b atom of styrene, followed by product-determining ring-closure), the L4Co catalyst is associated with lower energy barriers in both steps. DFT calculations indicate that the putative [L4Co]NTs and [L8Co]NTs species are electronically distinct, inasmuch as the former exhibits a single-electron oxidized ligand arm. In addition, DFT calculations suggest that including London dispersion corrections for L4Co (due to the polarizability of the tert-Bu substituent) can provide significant stabilization of the turnover-limiting transition state. This study highlights how small ligand modifications can generate stereoelectronic variants that in certain cases are even capable of overriding the preponderance of the metal-nitrene electrophilicity as a driving force.

O-Heterocycle Synthesis via Intramolecular C-H Alkoxylation Catalyzed by Iron Acetylacetonate

Intramolecular alkoxylation of C-H bonds can rapidly introduce structural and functional group complexities into seemingly simple or inert precursors. The transformation is particularly important due to the ubiquitous presence of tetrahydrofuran (THF) motifs as fundamental building blocks in a wide range of pharmaceuticals, agrochemicals, and natural products. Despite the various synthetic methodologies known for generating functionalized THFs, most show limited functional group tolerance and lack demonstration for the preparation of spiro or fused bi- and tricyclic ether units prevalent in molecules for pharmacological purposes. Herein we report an intramolecular C-H alkoxylation to furnish oxacycles from easily prepared α-diazo-β-ketoesters using commercially available iron acetylacetonate (Fe(acac)₂) as a catalyst. The reaction is proposed to proceed through the formation of a vinylic carboradical arising from N₂ extrusion, which mediates a proximal H-atom abstraction followed by a rapid C-O bond forming radical recombination step. The radical mechanism is probed using an isotopic labeling study (vinyl C-D incorporation), ring opening of a radical clock substrate, and Hammett analysis and is further corroborated by density functional theory (DFT) calculations. Heightened reactivity is observed for electron-rich C-H bonds (tertiary, ethereal), while greater catalyst loadings or elevated reaction temperatures are required to fully convert substrates with benzylic, secondary, and primary C-H bonds. The transformation is highly functional group tolerant and operates under mild reaction conditions to provide rapid access to complex structures such as spiro and fused bi-/tricyclic O-heterocycles from readily available precursors.

Mapping the Reactivity of Dicobalt Bridging Nitrides in Constrained Geometries

Low-nuclearity nitrides of the late transition metals are rare and reactive molecular species, with little experimental precedent. The first putative examples of dicobalt bridging nitrides, [(nPDI2)Co2(μ-N)(PMe3)2][OTf]3 (n[Co2N]3+; PDI = pyridyldiimine; n = 2 or 3, representing the length of the aliphatic chain linking PDI imino groups), were reported recently and shown to undergo a range of intramolecular reaction pathways, including N-H bond formation, C-H bond insertion, and P═N bond formation at the bridging nitride. The specific mode of reactivity changed with the phase of the reaction and the size of the macrocycle used to support the transient species. The present contribution offers a computational investigation into both the geometric and electronic structures of these nitrides as well as the factors governing their reaction selectivity. The compounds n[Co2N]3+ exhibit μ-N-based lowest unoccupied molecular orbitals (LUMOs) that are consistent with subvalent, electrophilic nitrides. The specific orientations of the LUMOs induce ring-size-dependent stereoelectronic effects, thereby causing the product selectivity observed experimentally. Notably, the nitrides also exhibit a degree of nucleophilicity at μ-N by way of a high-energy, μ-N-based lone pair. This ambiphilic character appears to be a direct result of the constrained environment imposed by the folded-ligand geometries of n[Co2N]3+. When combined with the experimental findings, these data led to the conclusion that the folded-ligand isomers are the reactive species and that the constrained geometry imposed by the macrocyclic ligand plays an important role in controlling the reaction outcome.

Catalytic Carbodiimide Guanylation by a Nucleophilic, High Spin Iron(II) Imido Complex

Reduction of the three-coordinate iron(III) imido [Ph₂B(^tBuIm)₂Fe═NDipp] (1) affords [Ph₂B(^tBuIm)₂Fe═NDipp][K(18-C-6)THF₂] (2), a rare example of a high-spin (S = 2) iron(II) imido complex. Unusually for a late metal imido complex, the imido ligand in 2 has nucleophilic character, as demonstrated by the reaction with DippNH₂, which establishes an equilibrium with the bis(anilido) complex [Ph₂B(^tBuIm)₂Fe(NHDipp)₂][K(18-C-6)THF₂] (3). In an unusual transformation, formal insertion of ⁱPrN═C═NⁱPr into the Fe═N(imido) bond yields the guanidinate [Ph₂B(^tBuIm)₂Fe(ⁱPrN)₂CNDipp][K(18-C-6)THF₂] (4). Reaction of 4 with excess DippNH₂ provides 3, along with the guanidine (ⁱPrNH)₂C═NDipp. As suggested by these stoichiometric reactions, 2 is an efficient catalyst for the guanylation of carbodiimides, converting a wide range of aniline substrates under mild conditions.

Cobalt-Catalyzed Intermolecular C-H Amidation of Unactivated Alkanes

Alkanes are an abundant and inexpensive source of hydrocarbons; thus, development of new methods to convert the hydrocarbon feedstocks to value-added chemicals is of high interest. However, it is challenging to achieve such transformation in a direct and selective manner mainly due to the intrinsic inertness of their C-H bonds. We herein report a tailored Cp*Co(III)(LX)-catalyzed efficient and site-selective intermolecular amidation of unactivated hydrocarbons including light alkanes. Electronic modulation of the cobalt complexes led to the enhanced amidation efficiency, and these effects were theoretically rationalized by the FMO analysis of presupposed cobalt nitrenoid species. Under the current cobalt protocol, a secondary C-H bond selectivity was observed in various nonactivated alkanes to reverse the intrinsic tertiary preference, which is attributed to the steric demands of the cobalt system that imposes difficulties in accessing tertiary C-H bonds. Experimental and computational studies suggested that the putative triplet Co nitrenoids are transferred to the C-H bonds of alkanes via a radical-like hydrogen abstraction pathway.

A Dinickel Catalyzed Cyclopropanation without the Formation of a Metal Carbene Intermediate

(NDI)Ni2 catalysts (NDI=naphthyridine-diimine) promote cyclopropanation reactions of 1,3-dienes using (Me3 Si)CHN2 . Mechanistic studies reveal that a metal carbene intermediate is not part of the catalytic cycle. The (NDI)Ni2 (CHSiMe3 ) complex was independently synthesized and found to be unreactive toward dienes. Based on DFT models, we propose an alternative mechanism that begins with a Ni2 -mediated coupling of (Me3 Si)CHN2 and the diene. N2 extrusion followed by radical C-C bond formation generates the cyclopropane product. This model reproduces the experimentally observed regioselectivity and diastereoselectivity of the reaction.

Catalytic Chemoselective Sulfimidation with an Electrophilic [CoIII (TAML)]- -Nitrene Radical Complex*

The cobalt species PPh4 [CoIII (TAMLred )] is a competent and stable catalyst for the sulfimidation of (aryl)(alkyl)-substituted sulfides with iminoiodinanes, reaching turnover numbers up to 900 and turnover frequencies of 640 min-1 under mild and aerobic conditions. The sulfimidation proceeds in a highly chemoselective manner, even in the presence of alkenes or weak C-H bonds, as supported by inter- and intramolecular competition experiments. Functionalization of the sulfide substituent with various electron-donating and electron-withdrawing arenes and several alkyl, benzyl and vinyl fragments is tolerated, with up to quantitative product yields. Sulfimidation of phenyl allyl sulfide led to [2,3]-sigmatropic rearrangement of the initially formed sulfimide species to afford the corresponding N-allyl-S-phenyl-thiohydroxylamines as attractive products. Mechanistic studies suggest that the actual nitrene transfer to the sulfide proceeds via (previously characterized) electrophilic nitrene radical intermediates that afford the sulfimide products via electronically asynchronous transition states, in which SET from the sulfide to the nitrene radical complex precedes N-S bond formation in a single concerted process.

Unravelling nitrene chemistry from acyclic precursors: recent advances and challenges

Recent advances in nitrene chemistry from acyclic precursors are reviewed in this paper.

Mechanistic and chemoselective insights on sp3- and sp2-C–H bond aminations: Fe- vs. Ir-based catalysis

The mechanisms of Fe- and Ir-catalyzed sp³- and sp²-C–H bond aminations of a styryl substrate have been studied using the BPW91 method, with an emphasis on the origin of sp³-to-sp²-C–H amination chemoselectivity.

In Crystallo Snapshots of Rh2-Catalyzed C-H Amination

While X-ray crystallography routinely provides structural characterization of kinetically stable pre-catalysts and intermediates, elucidation of the structures of transient reactive intermediates, which are intimately engaged in bond-breaking and -making during catalysis, is generally not possible. Here, we demonstrate in crystallo synthesis of Rh₂ nitrenoids that participate in catalytic C-H amination, and we characterize these transient intermediates as triplet adducts of Rh₂. Further, we observe the impact of coordinating substrate, which is present in excess during catalysis, on the structure of transient Rh₂ nitrenoids. By providing structural characterization of authentic C-H functionalization intermediates, and not kinetically stabilized model complexes, these experiments provide the opportunity to define critical structure-activity relationships.

O-Benzoylhydroxylamines as Alkyl Nitrene Precursors: Synthesis of Saturated N-Heterocycles from Primary Amines

We introduce O-benzoylhydroxylamines as competent alkyl nitrene precursors. The combination of readily available, stable substrates and a proficient rhodium catalyst provides a straightforward means for the construction of various pyrrolidine rings from the corresponding primary amines. Preliminary mechanistic investigation suggests that the structure of the nitrene precursor plays a role in determining the nature of the resulting reactive intermediate.