Scalable One-Pot-Liquid-Phase Oligonucleotide Synthesis for Model Network Hydrogels

Hydrogen Fluoride Imidazole: A Simple, Efficient, Mild, and Cost-Effective Silyl-Ether Deprotection Reagent

Despite the availability of numerous -OH silyl protection and deprotection methods, the selective cleavage of silyl ethers in highly complex molecules can still be a challenge. In this article, we present results from a full investigation of a novel, efficient, and mild desilylation protocol using HF/imidazole. Imidazole significantly enhances the desilylation reaction efficiency of HF, allowing clean and complete deprotection of TBDPS ethers in substrates containing both acid and base sensitive groups. For example, four- and five-mer oligonucleotides were efficiently deprotected where all other conditions failed. HF/imidazole is also an effective reagent for the deprotection of TIPS and TBDMS ethers. The reagent prepared using commercially available HF and imidazole maintained the same reactivity even after 4 years of storage at 4 °C. Residual reagents and byproducts can be readily removed with a simple workup; consequently, deprotection of TBDPS was successfully implemented in a 2.5 kg scale synthesis of a five-mer oligonucleotide.

Tuning the Solubility of Soluble Support Constructs in Liquid Phase Oligonucleotide Synthesis

Solubility of the growing oligonucleotide-soluble support constructs in the liquid phase oligonucleotide synthesis (LPOS) is a critical parameter, which affects coupling efficiency, purity, and recovery of the growing oligonucleotides during the chain elongation. In the present study, oligonucleotides have been assembled on a 4-oxoheptanedioic acid (OHDA) linker-derived tetrapodal soluble support using 5'-O-(2-methoxyprop-2-yl)-protected 2'-deoxyribonucleotide phosphoroamidite building blocks with different nucleobase protecting groups [isobutyryl (Gua), 1-butylpyrrolidin-2-ylidene (Gua, Cyt), 2,4-dimethylbenzoyl (Ade, Cyt), and Bz (Thy)]. The solubility of the oligonucleotide-soluble support constructs (molecular mass varying between 3 and 10 kDa) as models of protected tetra-, octa-, dodeca-, hexadeca-, and eicosa-nucleotides was measured in different solvent systems and in potential antisolvents. By tuning the nucleobase protecting group scheme, the solubility can be improved in aprotic organic solvent systems, while the recovery of the constructs in the precipitation, used for the isolation and purification of the growing oligonucleotide intermediates in a protic antisolvent (2-propanol), remained near quantitative. The precipitation-based yield of the protected tetrapodal oligonucleotides varied from a quantitative to 90% yield. Overall yield (for di-: 95%, tri-: 79-96%, tetra-: 82-88%, and pentanucleotides: 68-75%) and purity of the LPOS were evaluated by RP HPLC and MS-spectroscopy of the released oligonucleotide aliquots. In addition, the orthogonality of the OHDA linker was applied to release authentic protected nucleotides from the soluble supports.

DNA Hierarchical Superstructures from Micellar Units: Stiff Hydrogels and Anisotropic Nanofibers

Supramolecular materials have been assembled using a wide range of interactions, including the hydrophobic effect, DNA base-pairing, and hydrogen bonding. Specifically, DNA amphiphiles with a hydrophobic building block self-assemble into diverse morphologies depending on the length and composition of both blocks. Herein, we take advantage of the orthogonality of different supramolecular interactions - the hydrophobic effect, Watson-Crick-Franklin base pairing and RNA kissing loops - to create hierarchical self-assemblies with controlled morphologies on both the nanometer and the micrometer scales. Assembly through base-pairing leads to the formation of hybrid, multi-phasic hydrogels with high stiffness and self-healing properties. Assembly via hydrophobic core interactions gives anisotropic, discrete assemblies, where DNA fibers with one sequence are terminated with DNA spheres bearing different sequences. This work opens new avenues for the bottom-up construction of DNA-based materials, with promising applications in drug delivery, tissue engineering, and the creation of complex DNA structures from a minimum array of components.

Hierarchical Mechanical Transduction of Precision-Engineered DNA Hydrogels with Sacrificial Bonds

Engineering the response to external signals in mechanically switchable hydrogels is important to promote smart materials applications. However, comparably little attention has focused on embedded precision mechanisms for autonomous nonlinear response in mechanical profiles in hydrogels, and we lack understanding of how the behavior from the molecular scale transduces to the macroscale. Here, we design a nonlinear stress-strain response into hydrogels by engineering sacrificial DNA hairpin loops into model network hydrogels formed from star-shaped building blocks. We characterize the force-extension response of single DNA hairpins and are able to describe how the specific topology influences the nonlinear mechanical behavior at different length scales. For this purpose, we utilize force spectroscopy as well as microscopic and macroscopic deformation tests. This study contributes to a better understanding of designing nonlinear strain-adaptive features into hydrogel materials.

From CPG to hybrid support: Review on the approaches in nucleic acids synthesis in various media

Solid-phase synthesis is, to date, the preferred method for the manufacture of oligonucleotides, in quantities ranging from a few micrograms for research purposes to several kilograms for therapeutic or commercial use. But for large-scale oligonucleotide manufacture, scaling up and hazardous waste production pose challenges that necessitate the investigation of alternate synthetic techniques. Despite the disadvantages of glass supports, using soluble supports as a substitute presents difficulties because of their high overall yield and complex purification steps. To address these challenges, various independent approaches have been developed; however, other problems such as insufficient cycle efficiency and synthesis of oligonucleotide chains of desired length continue to exist. In this study, we present a review of the current developments, advantages, and difficulties of recently reported alternatives to supports based on controlled pore glass, and discuss the importance of a support choice to resolve issues arising during oligonucleotide synthesis.

Nucleic acid amphiphiles: Synthesis, properties, and applications

Nucleic acid amphiphiles, referring to nucleic acids modified with large hydrophobic groups, have been widely used in programmable bioengineering. Since nucleic acids are intrinsically hydrophilic, the hydrophobic groups endow nucleic acid amphiphiles with unique properties, such as self-assembling, interactions with artificial or biological membranes, and transmembrane transport. Importantly, the hybridization or target binding capability of oligonucleotide itself supplies nucleic acid amphiphiles with excellent programmability. As a result, this type of molecule has attracted considerable attention in academic studies and has enormous potential for further applications. For a comprehensive understanding of nucleic acid amphiphiles, we review the reported research on nucleic acid amphiphiles from their molecular design to final applications, in which we summarize the synthetic strategies for nucleic acid amphiphiles and draw much attention to their unique properties in different contexts. Finally, a summary of the applications of nucleic acid amphiphiles in drug development, bioengineering, and bioanalysis are critically discussed.

Stereo-Controlled Liquid Phase Synthesis of Phosphorothioate Oligonucleotides on a Soluble Support

5'-O-(2-Methoxyisopropyl) (MIP)-protected 2'-deoxynucleosides as chiral P(V)-building blocks, based on the limonene-derived oxathiaphospholane sulfide, were synthesized and used for the assembly of di-, tri-, and tetranucleotide phosphorothioates on a tetrapodal pentaerythritol-derived soluble support. The synthesis cycle consisted of two reactions and two precipitations: (1) the coupling under basic conditions, followed by neutralization and precipitation and (2) an acid catalyzed 5'-O-deacetalization, followed by neutralization and precipitation. The simple P(V) chemistry together with the facile 5'-O-MIP deprotection proved efficient in the liquid phase oligonucleotide synthesis (LPOS). Ammonolysis released nearly homogeneous Rp or Sp phosphorothioate diastereomers in ca. 80% yield/synthesis cycle.

Small Molecule-Templated DNA Hydrogel with Record Stiffness Integrates and Releases DNA Nanostructures and Gene Silencing Nucleic Acids

Deoxyribonucleic acid (DNA) hydrogels are a unique class of programmable, biocompatible materials able to respond to complex stimuli, making them valuable in drug delivery, analyte detection, cell growth, and shape-memory materials. However, unmodified DNA hydrogels in the literature are very soft, rarely reaching a storage modulus of 10³  Pa, and they lack functionality, limiting their applications. Here, a DNA/small-molecule motif to create stiff hydrogels from unmodified DNA, reaching 10⁵  Pa in storage modulus is used. The motif consists of an interaction between polyadenine and cyanuric acid-which has 3-thymine like faces-into multimicrometer supramolecular fibers. The mechanical properties of these hydrogels are readily tuned, they are self-healing and thixotropic. They integrate a high density of small, nontoxic molecules, and are functionalized simply by varying the molecule sidechain. They respond to three independent stimuli, including a small molecule stimulus. These stimuli are used to integrate and release DNA wireframe and DNA origami nanostructures within the hydrogel. The hydrogel is applied as an injectable delivery vector, releasing an antisense oligonucleotide in cells, and increasing its gene silencing efficacy. This work provides tunable, stimuli-responsive, exceptionally stiff all-DNA hydrogels from simple sequences, extending these materials' capabilities.

Oligonucleotide Synthesis on Porous Glass Resins Containing Activators

For the advancement of nucleic acid-related research, high-efficiency, low-cost synthesis of high-purity oligonucleotides is necessary. Herein, we introduced hydroxybenzotriazole (HOBt) activators on controlled pore glass resins to improve the efficiency of chain elongation (the synthesis efficiency increased from 48% without an activator to 92% with an activator). In particular, the use of the resin containing 6-trifluoromethyl HOBt with a linker of lauric acid and succinic acid significantly improved the synthesis efficiency for both DNA and RNA syntheses.

Dynamically Bioresponsive DNA Hydrogel Incorporated with Dual-Functional Stem Cells from Apical Papilla-Derived Exosomes Promotes Diabetic Bone Regeneration

The regeneration of bone defects in patients with diabetes mellitus (DM) is remarkably impaired by hyperglycemia and over-expressed proinflammatory cytokines, proteinases (such as matrix metalloproteinases, MMPs), etc. In view of the fact that exosomes represent a promising nanomaterial, herein, we reported the excellent capacity of stem cells from apical papilla-derived exosomes (SCAP-Exo) to facilitate angiogenesis and osteogenesis whether in normal or diabetic conditions in vitro. Then, a bioresponsive polyethylene glycol (PEG)/DNA hybrid hydrogel was developed to support a controllable release of SCAP-Exo for diabetic bone defects. This system could be triggered by the elevated pathological cue (MMP-9) in response to the dynamic diabetic microenvironment. It was further confirmed that the administration of the injectable SCAP-Exo-loaded PEG/DNA hybrid hydrogel into the mandibular bone defect of diabetic rats demonstrated a great therapeutic effect on promoting vascularized bone regeneration. In addition, the miRNA sequencing suggested that the mechanism of dual-functional SCAP-Exo might be related to highly expressed miRNA-126-5p and miRNA-150-5p. Consequently, our study provides valuable insights into the design of promising bioresponsive exosome-delivery systems to improve bone regeneration in diabetic patients.

Star-Polymer-DNA Gels Showing Highly Predictable and Tunable Mechanical Responses

Dynamically crosslinked gels are appealing materials for applications that require time-dependent mechanical responses. DNA duplexes are ideal crosslinkers for building such gels because of their excellent sequence addressability and flexible tunability in bond energy. However, the mechanical responses of most DNA gels are complicated and unpredictable. Here, a DNA gel with a highly homogeneous gel network and well predictable mechanical behaviors is demonstrated by using a pair of star-polymer-DNA precursors with presimulated DNA sequences showing the two-state transition. The melting curve analysis of the DNA gels reveals the good correspondence between the thermodynamic potentials of the DNA crosslinkers and the presimulated values by DNA calculators. Stress-relaxation tests and dissociation kinetics measurements show that the macroscopic relaxation time of the DNA gels is approximately equal to the lifetime of the DNA crosslinkers over 4 orders of magnitude from 0.1-2000 s. Furthermore, a series of durability tests find the DNA gels are hysteresis-less and self-healable after the applications of repeated temperature and mechanical stimuli. These results demonstrate the great potential of star-polymer-DNA precursors for building gels with predictable and tunable viscoelastic properties, suitable for applications such as stress-response extracellular matrices, injectable solids, and soft robotics.

Star polymer networks: a toolbox for cross-linked polymers with controlled structure

The synthesis of precisely controlled polymer networks has been a long-cherished dream of polymer scientists. Traditional random cross-linking strategies often lead to uncontrolled networks with various kinds of defects. Recent...

Solution-phase synthesis of oligodeoxyribonucleotides using the H-phosphonate method with N-unprotected 5'-phosphite monomers

Recent advances in nucleic acid therapeutics increase the requirements for developing efficient methods for the chemical synthesis of oligodeoxyribonucleotides (ODNs). In this study, we report a new approach for the solution-phase synthesis of ODNs using the H-phosphonate method with N-unprotected 5'-phosphite monomers. The 5'-phosphite monomers are synthesized in a single step from unprotected 2'-deoxyribonucleosides using 5'-O-selective phosphitylation and can be applied to the synthetic cycle of the H-phosphonate method. We synthesized four kinds of 5'-phosphite monomers and then optimized the conditions for the condensation between the 3'-hydroxy groups of the 5'-phosphite monomers and the H-phosphonate monoesters. As a result of various investigations, solution-phase synthesis of trithymidine diphosphate (TTT) and tetramers containing four kinds of nucleobases was achieved according to the procedure consisting of repeated condensation, deprotection, and purification using simple extraction or precipitation.

Development of Kilogram-Scale Convergent Liquid-Phase Synthesis of Oligonucleotides

Oligonucleotide drugs show promise to treat diseases afflicting millions of people. To address the need to manufacture large quantities of oligonucleotide therapeutics, the novel convergent liquid-phase synthesis has been developed for an 18-mer oligonucleotide drug candidate. Fragments containing tetra- and pentamers were synthesized and assembled into the 18-mer without column chromatography, which had a similar impurity profile to material made by standard solid-phase oligonucleotide synthesis. Two of the fragments have been synthesized at ∼3 kg/batch sizes and four additional tetra- and pentamer fragments were synthesized at >300-g scale, and a 34-mer was assembled from the fragments. Critical impurities are controlled in the fragment syntheses to provide oligonucleotides of purities suitable for clinical use after applying standard full-length product purification process. Impurity control in the assembly steps demonstrated the potential to eliminate chromatography of full-length oligonucleotides, which should enhance scalability and reduce the environmental impact of the process. The convergent assembly and telescoping of reactions made the long synthesis (>60 reactions) practical by reducing production time, material loss, and chances for impurity generation.

Self-Assembly of DNA Molecules: Towards DNA Nanorobots for Biomedical Applications

DNA nanotechnology takes DNA molecule out of its biological context to build nanostructures that have entered the realm of robots and thus added a dimension to cyborg and bionic systems. Spurred by spring-like properties of DNA molecule, the assembled nanorobots can be tuned to enable restricted, mechanical motion by deliberate design. DNA nanorobots can be programmed with a combination of several unique features, such as tissue penetration, site-targeting, stimuli responsiveness, and cargo-loading, which makes them ideal candidates as biomedical robots for precision medicine. Even though DNA nanorobots are capable of detecting target molecule and determining cell fate via a variety of DNA-based interactions both in vitro and in vivo, major obstacles remain on the path to real-world applications of DNA nanorobots. Control over nanorobot's stability, cargo loading and release, analyte binding, and dynamic switching both independently and simultaneously represents the most eminent challenge that biomedical DNA nanorobots currently face. Meanwhile, scaling up DNA nanorobots with low-cost under CMC and GMP standards represents other pertinent challenges regarding the clinical translation. Nevertheless, DNA nanorobots will undoubtedly be a powerful toolbox to improve human health once those remained challenges are addressed by using a scalable and cost-efficient method.

Putting DNA to Work as Generic Polymeric Materials

DNA is a true polymer that stores the genetic information of an organism. With its amazing biological and polymeric characteristics, DNA has been regarded as a universal building block for the construction of diverse materials for real-world applications. Through various approaches including ligation, polymerization, chemical crosslinking, and physical crosslinking, both pure and hybrid DNA gels have been developed as generic materials. This Review discusses recent advances in the construction of DNA-based networks without considering any of DNA's genetic properties. In addition, we highlight the biomedical and non-biomedical applications of DNA as generic materials. Owing to the superb molecular recognition, self-assembly, and responsiveness of DNA, a mushrooming number of DNA materials with various properties have been developed for general utilization.

One-Component DNA Mechanoprobes for Facile Mechanosensing in Photopolymerized Hydrogels and Elastomers

DNA mechanosensors offer unique properties for mechano-adaptive and self-reporting materials, such as programmable bond strength and geometrical strain response, tunable fluorescent strain sensing, interfacing to biological systems, and the ability to store mechanical information. However, the facile incorporation of advanced DNA motifs into polymer networks and achieving robustness in application settings remain difficult. Herein, we introduce one-component DNA mechanoprobes that can be easily polymerized into polymer hydrogels and even elastomers to allow strain-induced fluorescence sensing. The all-in-one mechanoprobe contains a DNA hairpin for programmable force sensing, an internal fluorophore-quencher pair as a reporter, and methacrylamide groups on both ends for rapid and facile photopolymerization into networks based on the nontoxic water-soluble monomer methoxy triethylene glycol acrylate (mTEGA). In addition to mechanosensing hydrogels, we utilize the low T_g of p(mTEGA) to develop the first bulk elastomer materials with DNA force sensors, which show high elasticity and stronger mechanofluorescence. The system makes decisive steps forward for DNA-based mechanoprobes by overcoming the classical multicomponent design of such probes, allowing photopolymerization useful for the design of complex objects or even 3D printing and demonstrating that such motifs may even be useful in dry bulk materials.

Recent progress in non-native nucleic acid modifications

While Nature harnesses RNA and DNA to store, read and write genetic information, the inherent programmability, synthetic accessibility and wide functionality of these nucleic acids make them attractive tools for use in a vast array of applications.