Hydrogen Spillover to Oxygen Vacancy of TiO2–xHy/Fe: Breaking the Scaling Relationship of Ammonia Synthesis

Cobalt Single-Atom Reverse Hydrogen Spillover for Efficient Electrochemical Water Dissociation and Dechlorination

Efficient water dissociation to atomic hydrogen (H*) with restrained recombination of H* is crucial for improving the H* utilization for electrochemical dechlorination, but is currently limited by the lack of feasible electrodes. Herein, we developed a monolithic single-atom electrode with Co single atoms anchored on the inherent oxide layer of titanium foam (Co1-TiOx/Ti), which can efficiently dissociate water into H* and simultaneously inhibit the recombination of H*, by taking advantage of the single-atom reverse hydrogen spillover effect. Experimental and theoretical calculations demonstrated that H* could be rapidly generated on the oxide layer of titanium foam, and then overflowed to the adjacent Co single atom for the reductive dechlorination. Using chloramphenicol as a proof-of-concept verification, the resulting Co1-TiOx/Ti monolithic electrode exhibited an unprecedented performance with almost 100 % dechlorination at -1.0 V, far superior to that of traditional indirect reduction-driven commercial Pd/C (52 %) and direct reduction-driven Co1-N-C (44 %). Moreover, its dechlorination rate constant of 1.64 h-1 was 4.3 and 8.6 times more active than those of Pd/C (0.38 h-1) and Co1-N-C (0.19 h-1), respectively. Our research sheds light on the rational design of hydrogen spillover-related electrocatalysts to simultaneously improve the H* generation, transfer, and utilization for environmental and energy applications.

Fe-Bi dual sites regulation of Bi2O2.33 nanosheets to promote photocatalytic nitrogen fixation activity

In the process of photocatalytic ammonia synthesis, efficient activation of nitrogen molecules constitutes a fundamental challenge. During the N2 activation, the close interdependence between the acceptance and donation of electron results in their mutual limitation, leading to high energy barrier for N2 activation and unsatisfactory photocatalytic performance. This work decoupled the electron acceptance and donation processes by constructing Fe-Bi dual active sites, resulting in enhancing N2 activation through the high electron trapping ability of Fe3+ and strong electron donating ability of Bi2+. The photocatalytic nitrogen reduction efficiency of 3%Fe/Bi2O2.33 (118.71 μmol gcat-1h-1) is 5.3 times that of Bi2O2.33 (22.41 μmol gcat-1h-1). In-situ Fourier transform infrared (In situ FTIR) spectroscopy and density functional theory (DFT) calculations manifest that Fe3+-Bi2+ dual active sites work together to promote nitrogen adsorption and activation, and the reaction path is more inclined toward alternate hydrogenation path. N2 adsorption and activation properties are optimized by heteronuclear bimetallic active sites, which offers a new way for the rational design of nitrogen-fixing photocatalysts.

Advancements in Electrocatalytic Nitrogen Reduction: A Comprehensive Review of Single-Atom Catalysts for Sustainable Ammonia Synthesis

Electrocatalytic nitrogen reduction technology seamlessly aligns with the principles of environmentally friendly chemical production. In this paper, a comprehensive review of recent advancements in electrocatalytic NH3 synthesis utilizing single-atom catalysts (SACs) is offered. Into the research and applications of three categories of SACs: noble metals (Ru, Au, Rh, Ag), transition metals (Fe, Mo, Cr, Co, Sn, Y, Nb), and nonmetallic catalysts (B) in the context of electrocatalytic ammonia synthesis is delved. In-depth insights into the material preparation methods, single-atom coordination patterns, and the characteristics of the nitrogen reduction reaction (NRR) are provided. The systematic comparison of the nitrogen reduction capabilities of various SAC types offers a comprehensive research framework for their integration into electrocatalytic NRR. Additionally, the challenges, potential solutions, and future prospects of incorporating SACs into electrocatalytic nitrogen reduction endeavors are discussed.

Recent Advances in Ammonia Synthesis: From Haber-Bosch Process to External Field Driven Strategies

Ammonia, a pivotal chemical feedstock and a potential hydrogen energy carrier, demands efficient synthesis as a key step in its utilization. The traditional Haber-Bosch process, known for its high energy consumption, has spurred researchers to seek ammonia synthesis under milder conditions. Advances in surface science and characterization technologies have deepened our understanding of the microscopic reaction mechanisms of ammonia synthesis. This article concentrates on gas-solid phase ammonia synthesis, initially exploring the latest breakthroughs and improvements in thermal catalytic synthesis. Building on this, it especially focuses on emerging external field-driven alternatives, such as photocatalysis, photothermal catalysis, and low-temperature plasma catalysis strategies. The paper concludes by discussing the future prospects and objectives of nitrogen fixation technologies. This comprehensive review is intended to provide profound insights for overcoming the inherent thermodynamic and kinetic constraints in traditional ammonia synthesis, thereby fostering a shift towards "green ammonia" production and significantly reducing the energy footprint.

Ammonia Synthesis over Fe-Supported Catalysts Mediated by Face-Sharing Nitrogen Sites in BaTiO3-x Ny Oxynitride

Nitride and hydride materials have been proposed as active supports for the loading of transition metal catalysts in thermal catalytic ammonia synthesis. However, the contribution of nitrogen or hydride anions in the support to the catalytic activity for supported transition-metal catalysts is not well understood, especially for Fe-based catalysts. Here, we report that hexagonal-BaTiO3-x Ny with nitrogen vacancies at face-sharing sites acts as a more efficient support for Fe catalysts for ammonia synthesis than BaTiO3 or BaTiO3-x Hx at 260 °C to 400 °C. Isotopic experiments, in situ measurements, and a small inverse isotopic effect in ammonia synthesis have revealed that nitrogen molecules are activated at nitrogen vacancies formed at the interface between Fe nanoparticles and the support. Nitrogen vacancies on BaTiO3-x Ny can promote the activity of Fe and Ni catalysts, while electron donation and suppression of hydrogen poisoning by BaTiO3-x Hx are significant in the Ru and Co systems.

Li-intercalated CeO2 as an ideal substrate for boosting ammonia synthesis

We present a Li-intercalated-CeO2 catalyst that exhibits outstanding activity for ammonia synthesis. The incorporation of Li significantly reduces the activation energy and suppresses hydrogen poisoning of the Ru co-catalysts. As a result, the lithium intercalation enables the catalyst to achieve ammonia production from N2 and H2 at substantially lower operating temperatures.

Multiple reaction pathway on alkaline earth imide supported catalysts for efficient ammonia synthesis

The tunability of reaction pathways is required for exploring efficient and low cost catalysts for ammonia synthesis. There is an obstacle by the limitations arising from scaling relation for this purpose. Here, we demonstrate that the alkali earth imides (AeNH) combined with transition metal (TM = Fe, Co and Ni) catalysts can overcome this difficulty by utilizing functionalities arising from concerted role of active defects on the support surface and loaded transition metals. These catalysts enable ammonia production through multiple reaction pathways. The reaction rate of Co/SrNH is as high as 1686.7 mmol·gCo-1·h-1 and the TOFs reaches above 500 h-1 at 400 °C and 0.9 MPa, outperforming other reported Co-based catalysts as well as the benchmark Cs-Ru/MgO catalyst and industrial wüstite-based Fe catalyst under the same reaction conditions. Experimental and theoretical results show that the synergistic effect of nitrogen affinity of 3d TMs and in-situ formed NH2- vacancy of alkali earth imides regulate the reaction pathways of the ammonia production, resulting in distinct catalytic performance different from 3d TMs. It was thus demonstrated that the appropriate combination of metal and support is essential for controlling the reaction pathway and realizing highly active and low cost catalysts for ammonia synthesis.

Engineering Sub-Nanometer Hafnia-Based Ferroelectrics to Break the Scaling Relation for High-Efficiency Piezocatalytic Water Splitting

Reversible control of ferroelectric polarization is essential to overcome the heterocatalytic kinetic limitation. This can be achieved by creating a surface with switchable electron density; however, owing to the rigidity of traditional ferroelectric oxides, achieving polarization reversal in piezocatalytic processes remains challenging. Herein, sub-nanometer-sized Hf0.5 Zr0.5 O2 (HZO) nanowires with a polymer-like flexibility are synthesized. Oxygen K-edge X-ray absorption spectroscopy and negative spherical aberration-corrected transmission electron microscopy reveal an orthorhombic (Pca21 ) ferroelectric phase of the HZO sub-nanometer wires (SNWs). The ferroelectric polarization of the flexible HZO SNWs can be easily switched by slight external vibration, resulting in dynamic modulation of the binding energy of adsorbates and thus breaking the "scaling relationship" during piezocatalysis. Consequently, the as-synthesized ultrathin HZO nanowires display superb water-splitting activity, with H2 production rate of 25687 µmol g-1  h-1 under 40 kHz ultrasonic vibration, which is 235 and 41 times higher than those of non-ferroelectric hafnium oxides and rigid BaTiO3 nanoparticles, respectively. More strikingly, the hydrogen production rates can reach 5.2 µmol g-1  h-1 by addition of stirring exclusively.

Hydrogen Spillover-Accelerated Selective Hydrogenation on WO3 with ppm-Level Pd

Hydrogen spillover from the metal to the support opens a fresh avenue to design dual-active site catalysts for selective hydrogenation. However, very limited knowledge has been obtained to reveal the relationship between the capacity of hydrogen spillover and catalytic performance of hydrogenation. Herein, hydrogen spillover-dependent selective hydrogenation has been demonstrated on WO₃-supported ppm-level Pd (PdHD/WO₃), where the *H species generated and spilled from Pd to WO₃ are readily utilized for addition of a reactant. The WO₃ supports with a hexagonal phase and a suitable oxygen defect concentration can enhance the capacity of hydrogen spillover, significantly accelerating the catalytic activity of PdHD/WO₃. For the hydrogenation of 4-chloronitrobenzene, the PdHD/WO₃ catalysts with the highest capacity of hydrogen spillover yielded a turnover frequency (TOF) of 47,488 h^-1 (33 times higher than that of traditional Pd/C). Meanwhile, benefiting from the hydrogen spillover, the unique adsorption of 4-chloronitrobenzene via the nitro group on the oxygen vacancy of WO₃ guaranteed >99.9% selectivity of 4-chloroaniline during the whole hydrogenation. This work thus helps to create an effective method for fabricating cost-effective nanocatalysts with an extremely low Pd loading for the ideal hydrogenation with extremely high activity and selectivity.

Toward Electrocatalytic Methanol Oxidation Reaction: Longstanding Debates and Emerging Catalysts

The study of direct methanol fuel cells (DMFCs) has lasted around 70 years, since the first investigation in the early 1950s. Though enormous effort has been devoted in this field, it is still far from commercialization. The methanol oxidation reaction (MOR), as a semi-reaction of DMFCs, is the bottleneck reaction that restricts the overall performance of DMFCs. To date, there has been intense debate on the complex six-electron reaction, but barely any reviews have systematically discussed this topic. To this end, the controversies and progress regarding the electrocatalytic mechanisms, performance evaluations as well as the design science toward MOR electrocatalysts are summarized. This review also provides a comprehensive introduction on the recent development of emerging MOR electrocatalysts with a focus on the innovation of the alloy, core-shell structure, heterostructure, and single-atom catalysts. Finally, perspectives on the future outlook toward study of the mechanisms and design of electrocatalysts are provided.

Nitrite Electroreduction to Ammonia Promoted by Molecular Carbon Dioxide with Near-unity Faradaic Efficiency

Electrochemical reduction of nitrite (NO₂ ^- ) offers an energy-efficient route for ammonia (NH₃ ) synthesis and reduction of the level of nitrite, which is one of the major pollutants in water. However, the near 100 % Faradaic efficiency (FE) has yet to be achieved due to the complicated reduction route with several intermediates. Here, we report that carbon dioxide (CO₂ ) can enhance the nitrite electroreduction to ammonia on copper nanowire (Cu NW) catalysts. In a broad potential range (-0.7∼-1.3 V vs. RHE), the FE of nitrite to ammonia is close to 100 % with a 3.5-fold increase in activity compared to that obtained without CO_2. In situ Raman spectroscopy and density functional theory (DFT) calculations indicate that CO₂ acts as a catalyst to facilitate the *NO to *N step, which is the rate determining step for ammonia synthesis. The promotion effect of CO₂ can be expanded to electroreduction of other nitro-compounds, such as nitrate to ammonia and nitrobenzene to aniline.

Synergizing Hydrogen Spillover and Deprotonation by the Internal Polarization Field in a MoS2 /NiPS3 Vertical Heterostructure for Boosted Water Electrolysis

Hydrogen spillover (HSo) has emerged to upgrade the hydrogen evolution reaction (HER) activity of Pt-support electrocatalysts, but it is not applicable to the deprotonated oxygen evolution reaction (OER). Non-precious catalysts that can perform well in both HSo and deprotonation (DeP) are extremely desirable for a sustainable hydrogen economy. Herein, an affordable MoS₂ /NiPS₃ vertical heterostructure catalyst is presented to synergize HSo and DeP for efficient water electrolysis. The internal polarization field (IPF) is clarified as the driving force of HSo in HER electrocatalysis. The HSo from the MoS₂ edge to NiPS₃ can activate the NiPS₃ basal plane to boost the HER activity of the MoS₂ /NiPS₃ heterostructure (112 mV vs reversible hydrogen electrode (RHE) at 10 mA cm^-2 ), while for OER, the IPF in the heterostructure can facilitate the hydroxyl diffusion and render MoS₂ -to-NiPS₃ /P-to-S dual-pathways for DeP. As a result, the stacking of OER-inactive MoS₂ on the NiPS₃ surface still brings intriguing OER enhancements. With them serving as electrode couples, the overall water splitting is attested stably with a cell voltage of 1.64 V at 10 mA cm^-2 . This research puts forward the IPF as the criterion in the rational design of HSo/DeP-unified non-precious catalysts for efficient water electrolysis.

Improved visible light photocatalytic nitrogen fixation activity using a FeII-rich MIL-101(Fe): breaking the scaling relationship by photoinduced FeII/FeIII cycling

The scaling relations between nitrogen adsorption and NH_x destabilization are key challenges to the widespread adoption of the photocatalytic synthesis of ammonia. In this work, a Fe^II-rich MIL-101(Fe) (MIL-101(Fe^II/Fe^III)) was synthesized using a one-step solvent thermal method with ethylene glycol (EG) as a reducing agent, which can break the scaling relationship by photoinduced Fe^II (high nitrogen adsorption ability) and Fe^III (high NH_z destabilization ability) cycling. XPS was used to detect the change in iron valence state in the MIL-101(Fe^II/Fe^III) material. The photocatalytic nitrogen fixation efficiency of MIL-101(Fe^II/Fe^III) under visible light without any sacrificial agent was 466.8 μmol h^-1 g^-1, five times that of MIL-101(Fe). After photocatalytic experiments, MIL-101(Fe^II/Fe^III) retained an unchanged Fe^II/Fe^III rate, indicating that this Fe^II/Fe^III cycling can be maintained. DFT modeling of the Fe^II-rich MOF material showed that a FeII1 FeIII2 system has a higher N₂ activation capacity than a FeIII3 system. The catalytic mechanism was further proved by in situ infrared spectra and N¹⁵ isotopic tracers. Therefore, the improvement of photocatalytic activity was mainly attributed to the change in the nitrogen adsorption capacity during the photoinduced Fe^II/Fe^III cycling.

Hydrogenated Molybdenum Oxide Overlayers Formed on Mo Nitride Nanosheets in Ambient-Pressure CO2/H2 Gases

Transition metal nitrides (TMN_x) often exhibit high catalytic activity in many important reactions. Due to their low stability in a reaction environment, it remains as a crucial issue to reveal surface active structures in catalytic reactions, particularly for the cases containing both oxidative and reductive gases. Herein, MoN and Mo₂N nanosheets have been constructed on Al₂O₃(0001) and Au foil surfaces, and in situ surface characterizations are performed on the model catalysts in ambient-pressure CO₂, H₂, and CO₂ + H₂ gases. In situ Raman spectroscopy and quasi in situ X-ray photoelectron spectroscopy (XPS) analysis indicate that MoO₃ and defective MoO_3-x overlayers form on both MoN and Mo₂N surfaces in CO₂, and the surface oxidation occurs under a milder condition on Mo₂N than on MoN. Further, a hydrogenated Mo oxide (H_zMoO_3-y) overlayer forms in a CO₂ + H₂ atmosphere, as confirmed using quasi in situ XPS and time-of-flight secondary ion mass spectroscopy. The surface analysis over the model nitride catalysts suggests that O and/or H atoms may be incorporated into surface layers to form the active structure in many O and H-containing reactions.

Revealing hydrogen spillover pathways in reducible metal oxides

Hydrogen spillover, the migration of dissociated hydrogen atoms from noble metals to their support materials, is a ubiquitous phenomenon and is widely utilized in heterogeneous catalysis and hydrogen storage materials. However, in-depth understanding of the migration of spilled hydrogen over different types of supports is still lacking. Herein, hydrogen spillover in typical reducible metal oxides, such as TiO₂, CeO₂, and WO₃, was elucidated by combining systematic characterization methods involving various in situ techniques, kinetic analysis, and density functional theory calculations. TiO₂ and CeO₂ were proven to be promising platforms for the synthesis of non-equilibrium RuNi binary solid solution alloy nanoparticles displaying a synergistic promotional effect in the hydrolysis of ammonia borane. Such behaviour was driven by the simultaneous reduction of both metal cations under a H₂ atmosphere over TiO₂ and CeO₂, in which hydrogen spillover favorably occurred over their surfaces rather than within their bulk phases. Conversely, hydrogen atoms were found to preferentially migrate within the bulk prior to the surface over WO₃. Thus, the reductions of both metal cations occurred individually on WO₃, which resulted in the formation of segregated NPs with no activity enhancement.

The hydrogen spillover pathway in typical reducible metal oxides, such as TiO₂, CeO₂, and WO₃, was investigated by combining various in situ characterization techniques, kinetic analysis, and density functional theory calculations.

Engineering of platinum–oxygen vacancy interfacial sites in confined catalysts for enhanced hydrogenation selectivity

Confined TiO2/Pt-700-Ar with rich Pt–Ov interfacial sites exhibits superior p-ABC selectivity compared with confined TiO2/Pt and unconfined Pt/TiO2-700-Ar with poor Pt–Ov interfacial sites.

Efficient full-spectrum driven ammonia synthesis over heterostructured TiO2 nanosheet arrays

Here, we report that efficient photocatalytic ammonia synthesis was realized across the entire solar spectrum by using Ru modified anatase/TiO₂(B) heterostructured nanosheet arrays. The superior NH₃ production rates of 2004 μg h^-1 g^-1 and 521 μg h^-1 g^-1 were achieved under visible light (400 nm) and near-infrared-light (1550 nm) irradiation, respectively.

Dual Active Centers Bridged by Oxygen Vacancies of Ru Single Atoms Hybrids Supported on Molybdenum Oxide for Photocatalytic Ammonia Synthesis

Photocatalytic synthesis of ammonia (NH 3 ) holds significant potential compared with the Haber-Bosch process. However, the reported photocatalysts suffered from low efficiency owing to localized electrons deficiency. Here, Ru-SA (single atoms)/H x MoO 3-y hybrids with abundant of Mo n+ (n < 6) species neighboring oxygen vacancies (O V ) are synthesized via a H-spillover process. Detailed characterizations demonstrate that Ru-SA/H x MoO 3 y hybrids can quantitatively produce NH 3 from N 2 and H 2 by the synergetic effect of dual active centers (Ru SA and Mo n+ ). That is, Ru SA boost the activation and migration of H 2 , and Mo n+ species act as the trapping sites of localized electrons and the adsorption and dissociation sites of N 2 , finally leading to NH 3 synthesis on Mo n+ -OH. The NH 3 generation rate is as high as 4.0 mmol h -1 g -1 , accompanied by an apparent quantum efficiency over 6.0% at 650 nm. Our finding may open up a new strategy for acquiring a better NH 3 synthesis approach under mild conditions.

Boosting Nitrogen Reduction to Ammonia on FeN4 Sites by Atomic Spin Regulation

Understanding the relationship between the electronic state of active sites and N2 reduction reaction (NRR) performance is essential to explore efficient electrocatalysts. Herein, atomically dispersed Fe and Mo sites are designed and achieved in the form of well-defined FeN4 and MoN4 coordination in polyphthalocyanine (PPc) organic framework to investigate the influence of the spin state of FeN4 on NRR behavior. The neighboring MoN4 can regulate the spin state of Fe center in FeN4 from high-spin (dxy 2 dyz 1 dxz 1 d z 2 1 d x 2 - y 2 1 ) to medium-spin (dxy 2 dyz 2 dxz 1 d z 2 1 ), where the empty d orbitals and separate d electron favor the overlap of Fe 3d with the N 2p orbitals, more effectively activating N≡N triple bond. Theoretical modeling suggests that the NRR preferably takes place on FeN4 instead of MoN4 , and the transition of Fe spin state significantly lowers the energy barrier of the potential determining step, which is conducive to the first hydrogenation of N2 . As a result, FeMoPPc with medium-spin FeN4 exhibits 2.0 and 9.0 times higher Faradaic efficiency and 2.0 and 17.2 times higher NH3 yields for NRR than FePPc with high-spin FeN4 and MoPPc with MoN4 , respectively. These new insights may open up opportunities for exploiting efficient NRR electrocatalysts by atomically regulating the spin state of metal centers.

Main Descriptors To Correlate Structures with the Performances of Electrocatalysts

Traditional trial and error approaches to search for hydrogen/oxygen redox catalysts with high activity and stability are typically tedious and inefficient. There is an urgent need to identify the most important parameters that determine the catalytic performance and so enable the development of design strategies for catalysts. In the past decades, several descriptors have been developed to unravel structure-performance relationships. This Minireview summarizes reactivity descriptors in electrocatalysis including adsorption energy descriptors involving reaction intermediates, electronic descriptors represented by a d-band center, structural descriptors, and universal descriptors, and discusses their merits/limitations. Understanding the trends in electrocatalytic performance and predicting promising catalytic materials using reactivity descriptors should enable the rational construction of catalysts. Artificial intelligence and machine learning have also been adopted to discover new and advanced descriptors. Finally, linear scaling relationships are analyzed and several strategies proposed to circumvent the established scaling relationships and overcome the constraints imposed on the catalytic performance.

Nanoporous Nickel-Molybdenum Oxide with an Oxygen Vacancy for Electrocatalytic Nitrogen Fixation under Ambient Conditions

The electrochemical nitrogen reduction reaction (NRR) is regarded as a sustainable method for N₂ fixation. N₂ adsorption and N≡N cleavage are the main challenges for the NRR. Herein, we propose a potential approach to enhance N₂ activation via introducing oxygen vacancies (OVs) into nanoporous NiO/MoO₃. Nanoporous NiO/MoO₃ with OVs (np-OVs-NiO/MoO₃) is prepared by a two-step process of dealloying and solid-state reaction. np-OVs-NiO/MoO₃ exhibits a high NH₃ yield of 35.4 μg h^-1 mg_cat^-1 and a Faradaic efficiency (FE) of 10.3% in 0.1 M PBS solution. The introduction of OVs enhances the conductivity, N₂ adsorption, and catalytic performance of np-NiO/MoO₃. The dual-metal sites with OVs have a unique electronic structure in favor of the "π back-donation" behavior, which decreases the energy barrier of protonation steps and improves the whole NRR process. This approach provides new insight into the design of composite transition metal oxides with OVs for the NRR catalyst under ambient conditions.

Cooperative Single-Atom Active Centers for Attenuating the Linear Scaling Effect in the Nitrogen Reduction Reaction

Cooperative effects of adjacent active centers are critical for single-atom catalysts (SACs) as active site density matters. Yet, how it affects scaling relationships in many important reactions such as the nitrogen reduction reaction (NRR) is underexplored. Herein we elucidate how the cooperation of two active centers can attenuate the linear scaling effect in the NRR through a first-principle study on 39 SACs comprised of two adjacent (∼4 Å apart) four N-coordinated metal centers (MN₄ duo) embedded in graphene. Bridge-on adsorption of dinitrogen-containing species appreciably tilts the balance of adsorption of N₂H and NH₂ toward N₂H and thus substantially loosens the restraint of scaling relationships in the NRR, achieving low onset potential (V) and direct N≡N cleavage (Mo, Re) at room temperature, respectively. The potential of the MN₄ duo in the NRR provides new insight into circumventing the limitations of scaling relationships in heterogeneous catalysis.