An Excitonic Perspective on Low-Dimensional Semiconductors for Photocatalysis

Insights into copper(I) phenylacetylide with in-situ transformation of oxygen and enhanced visible-light response for water decontamination: Cu-O bond promotes exciton dissociation and charge transfer

The widespread contamination of hexavalent chromium (Cr(VI)), pharmaceuticals and personal care products (PPCPs), and dyes is a growing concern. necessitating the development of convenient and effective technologies for their removal. Copper(I) phenylacetylide (PhC2Cu) has emerged as a promising photocatalyst for environmental remediation. In this study, we introduced a functional Cu-O bond into PhC2Cu (referred to as OrPhC2Cu) by creatively converting the adsorbed oxygen on the surface of PhC2Cu into a Cu-O bond to enhance the efficiency of Cr(VI) photoreduction, PPCPs photodegradation, and dyes photodegradation through a facile vacuum activating method. The incorporation of the Cu-O bond optimized the electron structure of OrPhC2Cu, facilitating exciton dissociation and charge transfer. The exciton dissociation behavior and charge transfer mechanism were systematically investigated for the first time in the OrPhC2Cu system by photoelectrochemical tests, fluorescence and phosphorescence (PH) techniques, and density functional theory (DFT) calculations. Remarkably, the enhanced visible-light response of OrPhC2Cu improved photon utilization and significantly promoted the generation of reactive species (RSs), leading to the highly efficient Cr(VI) photoreduction (98.52% within 25 min) and sulfamethazine photodegradation (94.65% within 60 min), with 3.91 and 5.23 times higher activity compared to PhC2Cu. Additionally, the photocatalytic efficiency of OrPhC2Cu in degrading anionic dyes surpassed that of cationic dyes. The performance of the OrPhC2Cu system in treating electroplating effluent or natural water bodies suggests its potential for practical applications.

Photocatalytic nanomaterials and their implications towards biomass conversion for renewable chemical and fuel production

Photocatalytic processes have recently gained popularity as a sustainable and energy-efficient method for converting biomass. This article gives a comprehensive overview of recent improvements in the photocatalytic conversion of biomass into useful chemicals and fuels utilizing various photocatalytic materials. The work delves into the assessment of diverse biomass sources and their preparation techniques, in addition to the synthesis of plasmonic nanoparticles as photocatalysts from biomass, offering a thorough examination. This review article provides detailed techniques for fabricating and synthesizing plasmonic nanoparticles. Furthermore, the study discusses advancements in coupling photo-oxidation alongside the hydrogen evolution mechanism for water splitting. Furthermore, prospective research topics are suggested, such as conducting a systematic analysis of photocatalysis's redox potential, developing more effective catalysts, broadening the variety of reaction types, and establishing industrial-scale photocatalytic production. Plasmonic photocatalysts have been utilized to convert biomass into H2 for energy, and to explore hypothesized molecular routes for the photocatalytic oxidation of 5-hydroxymethylfurfural (HMF), which may then be converted into 2,5-furandicarboxylic acid (FDCA). This review also discusses the surface functionalization of nanophotocatalysts with -COOH, NH2, and OH groups to increase their reactivity. Reactive oxygen species (ROS) formed on the surface of nanophotocatalysts under UV or solar light play a crucial role in photocatalytic reactions. Our review has shown many challenges and difficulties related to CO2 hydrogenation reactions in the presence of sustainable H2, powered by renewable energy sources. This is very critical for achieving a transition to net-zero emissions. These technologies will drive forward the development of biomass conversion processes into CO2-based fuels. This paper explores recent advancements in the conversion of biomass-derived CO2 into valuable chemicals using plasmonic nanophotocatalysts. In addition to this, density functional theory (DFT) calculations also reveal how functional groups help stabilize these nanoparticles and enhance electron density through photo-adsorption. This study provides a remarkable and significant review that examines current trends, future directions, and ongoing debates in this field, focusing on reaction conditions, catalyst design, and proposed mechanisms for producing valuable chemicals. These chemicals include single-carbon compounds like formaldehyde, formic acid, and methanol, as well as C2 + compounds such as acetic acid, ethanol, methyl formate, and oxyethylene ethers. Additionally, it addresses the current state of liquid-phase CO2 hydrogenation in the presence of photocatalysts, highlighting existing challenges and potential research paths. The paper also provides an overview of the advances and challenges in the electro- and photocatalytic oxidation of HMF (hydroxymethylfurfural), detailing strategies for creating high-value chemicals through these oxidation processes. These methods, which may involve reactions like the hydrogen evolution reaction, organic substrate reduction, CO2 reduction reaction, or N2 reduction reaction, are summarized and analyzed. Furthermore, the catalytic efficiency and mechanisms of various catalyst types in these conversion systems are introduced and discussed. Electron paramagnetic resonance and scavenger studies reveal the major active species (˙OH and ˙O2 -) in the photocatalytic conversion of biomass to different value-added products.

Insight mechanism of magnetic activated catalyst derived from recycled steel residue for black liquor degradation

The present work deals with developing a method for revalorizing steel residues to create sunlight-active photocatalysts based on iron oxides. Commercial-grade steel leftovers are oxidized under different combinations of pH and temperature (50-90 °C and 3 ≥ pH ≤ 5) in a low energy-intensive setup. The material with the highest production efficiency (yield > 12%) and magnetic susceptibility (χm = 387 × 10-6 m3/kg) was further explored and modified by diffusion of M2+ (Zn and Co) ions within the structure of the oxide using a hydrothermal method to create ZnFe2O4, CoFe2O4 and combined Co-Zn ferrite. (Co-Zn)Fe2O4 displayed a bandgap of 2.02 eV and can be activated under sunlight irradiation. Electron microscopy studies show that (Co-Zn)Fe2O4 consists of particles with diameters between 400 and 700 nm, homogeneous size, even distribution, and good dispersibility. Application of the developed materials in the sunlight catalysis of black liquors from cellulose extraction resulted in a reduction of the Chemical Oxygen Demand (- 15% on average) and an enhancement in biodegradability (> 0.57 BOD/COD) after 180 min of reaction. Since the presented process employs direct solar light, it opens the possibility to large-scale water treatment and chemical upgrading applications.

Pyrene-Alkyne-Based Conjugated Porous Polymers with Skeleton Distortion-Mediated ⋅O2 - and 1O2 Generation for High-Selectivity Organic Photosynthesis

Reactive oxygen species (ROS) play a crucial role in determining photocatalytic reaction pathways, intermediate species, and product selectivity. However, research on ROS regulation in polymer photocatalysts is still in its early stages. Herein, we successfully achieved series of modulations to the skeleton of Pyrene-alkyne-based (Tetraethynylpyrene (TEPY)) conjugated porous polymers (CPPs) by altering the linkers (1,4-dibromobenzene (BE), 4,4'-dibromobiphenyl (IP), and 3,3'-dibromobiphenyl (BP)). Experiments combined with theoretical calculations indicate that BE-TEPY exhibits a planar structure with minimal exciton binding energy, which favors exciton dissociation followed by charge transfer with adsorbed O2 to produce ⋅O2 -. Thus BE-TEPY shows optimal photocatalytic activity for phenylboronic acid oxidation and [3+2] cycloaddition. Conversely, the skeleton of BP-TEPY is significantly distorted. Its planar conjugation decreases, intersystem crossing (ISC) efficiency increases, which makes it more prone for resonance energy transfer to generate 1O2. Therefore, BP-TEPY displays best photocatalytic activity in [4+2] cycloaddition and thioanisole oxidation. Both above reactant conversion and its product selectivity exceed 99 %. This work systematically reveals the intrinsic structure-activity relationship among the skeleton structure of CPPs, excitonic behavior, and selective generation of ROS, providing new insights for the rational design of highly efficient and selective CPPs photocatalysts.

Exciton Dissociation into Charge Carriers in Porphyrinic Metal-Organic Frameworks for Light-Assisted Li-O2 Batteries

Light-assisted Li-O2 batteries exhibit a high round-trip efficiency attributable to the assistance of light-generated electrons and holes in oxygen reduction and evolution reactions. Nonetheless, the excitonic effect arising from Coulomb interaction between electrons and holes impedes carrier separation, thus hindering efficient utilization of photo-energy. Herein, porphyrinic metal-organic frameworks with (Fe2Ni)O(COO)6 clusters are used as photocathodes to accelerate exciton dissociation into charge carriers for light-assisted Li-O2 batteries. The coupling of Ni 3d and Fe 3d orbitals boosts ligand-to-metal cluster charge transfer, and hence drives exciton dissociation and activates O2 for superoxide (•O2 -) radicals, rather than singlet oxygen (1O2) under photoexcitation. These enable the light-assisted Li-O2 batteries with a low total overvoltage of 0.28 V and round-trip efficiency of 92% under light irradiation of 100 mW cm-2. This work highlights the excitonic effect in photoelectrochemical processes and provides insights into photocathode design for light-assisted Li-O2 batteries.

Enhancing Built-in Electric Fields via Molecular Symmetry Modulation in Supramolecular Photocatalysts for Highly Efficient Photocatalytic Hydrogen Evolution

Nature-inspired supramolecular self-assemblies are attractive photocatalysts, but their quantum yields are limited by poor charge separation and transportation. A promising strategy for efficient charge transfer is to enhance the built-in electric field by symmetry breaking. Herein, an unsymmetric protonation, N-heterocyclic π-conjugated anthrazoline-based supramolecular photocatalyst SA-DADK-H+ was developed. The unsymmetric protonation breaks the initial structural symmetry of DADK, resulting in ca. 50-fold increase in the molecular dipole, and facilitates efficient charge separation and transfer within SA-DADK-H+. The protonation process also creates numerous active sites for H2O adsorption, and serves as crucial proton relays, significantly improving the photocatalytic efficiency. Remarkably, SA-DADK-H+ exhibits an outstanding hydrogen evolution rate of 278.2 mmol g-1 h-1 and a remarkable apparent quantum efficiency of 25.1 % at 450 nm, placing it among the state-of-the-art performances in organic semiconductor photocatalysts. Furthermore, the versatility of the unsymmetric protonation approach has been successfully applied to four other photocatalysts, enhancing their photocatalytic performance by 39 to 533 times. These findings highlight the considerable potential of unsymmetric protonation induced symmetry breaking strategy in tailoring supramolecular photocatalysts for efficient solar-to-fuel production.

Interfacial Charge Transfer in Photoexcited QD-Molecule Composite of Tetrahedral CdSe Quantum Dot Coupled with Carbazole

Photoexcited charge transfer dynamics in CdSe quantum dots (QDs) coupled with carbazole were explored to model QD-molecule systems for light-harvesting applications. The absorption spectra of QDs with different sizes, i.e., Cd35Se20X30L30 (T1), Cd56Se35X42L42 (T2), and Cd84Se56X56L56 (T3) were simulated with quantum dynamical methods, which qualitatively match the reported experimental spectra. The carbazole is attached with a 3-amino group at the apex position of T1 (namely T1-3A-Cz), establishing proper electronic communication between T1 and carbazole. The spectra of T1-3A-Cz is 0.22 eV red-shifted compared to T1. A time-dependent perturbation was applied in tune with the lowest energy peak (3.63 eV) of T1-3A-Cz to investigate the charge transfer dynamics, which revealed an ultrafast charge separation within the femtosecond time scale. The electronic structure showed a favorable energy alignment between T1 and carbazole in T1-3A-Cz. The LUMO of carbazole was situated below the conduction band of the QD, while the HOMO of carbazole mixed perfectly with the top of the valence band of the QD, developing the interfacial charge transfer states. These states promoted the photoexcited electron transfer directly from the CdSe core to carbazole. A rapid and enhanced charge separation occurred with the laser field strength increasing from 0.001 to 0.005 V/Å. However, T1 connected to the other positions of carbazole did not show charge separation effectively. The photoinduced charge transfer is negligible in the case of T2-carbazole systems due to poor electronic coupling, and it is not observed in T3-carbazole systems. So, the T1-3A-Cz model acts as a perfect donor-acceptor QD-molecule nanocomposite that can harvest photon energy efficiently. Further enhancement of charge transfer can be achieved by coupling more carbazoles to the T1 QD (e.g., T1-3A-Cz2) due to the extension of hole delocalization between T1 and the carbazoles.

Elucidating Solvatochromic Shifts in Two-Dimensional Photocatalysts by Solving the Bethe-Salpeter Equation Coupled with Implicit Solvation Method

Many studies have focused on tailoring the photophysical properties of two-dimensional (2D) materials for photocatalytic (PC) or photoelectrochemical (PEC) applications. To understand the optical properties of 2D materials in solution, we established a computational method that combined the Bethe-Salpeter equation (BSE) calculations with our GW-GPE method, allowing for GW/BSE-level calculations with implicit solvation described using the generalized Poisson equation (GPE). We applied this method to MoS2, phosphorene (PP), and g-C3N4 and found that when the solvent dielectric increased, it reduced the exciton binding energy and quasiparticle bandgap, resulting in almost no solvatochromic shift in the excitonic peaks of MoS2 and PP, which is consistent with previous experiments. However, our calculations predicted that the solvent dielectric had a significant impact on the excitonic properties of g-C3N4, exhibiting a large solvatochromic shift. We expect that our GW/BSE-GPE method will offer insights into the design of 2D materials for PC and PEC applications.

Janus Zn-IV-VI: Robust Photocatalysts with Enhanced Built-In Electric Fields and Strain-Regulation Capability for Water Splitting

The use of 2D materials to produce hydrogen (H2 ) fuel via photocatalytic water splitting has been intensively studied. However, the simultaneous fulfillment of the three essential requirements-high photon utilization, rapid carrier transfer, and low-barrier redox reactions-for wide-pH-range production of H2 still poses a significant challenge with no additional modulation. By employing the first-principles calculations, it has been observed that the Janus ZnXY2 structures (X = Si/Ge/Sn, Y = S/Se/Te) exhibit significantly enhanced built-in electric fields (0.20-0.36 eV Å-1 ), which address the limitations intrinsically. Compared to conventional Janus membranes, the ductile ZnSnSe2 and ZnSnTe2 monolayers have stronger regulation of electric fields, resulting in improved electron mobility and excitonic nature (Ebinding = 0.50/0.35 eV). Both monolayers exhibit lower energy barriers of hydrogen evolution reaction (HER, 0.98/0.86 eV, pH = 7) and resistance to photocorrosion across pH 0-7. Furthermore, the 1% tensile strain can further boost visible light utilization and intermediate absorption. The optimal AC-type bilayer stacking configuration is conducive to enhancing electric fields for photocatalysis. Overall, Janus ZnXY2 membranes overcome the major challenges faced by conventional 2D photocatalysts via intrinsic polarization and external amelioration, enabling efficient and controllable photocatalysis without the need for doping or heterojunctions.

Excitons in metal-halide perovskites from first-principles many-body perturbation theory

Metal-halide perovskites are a structurally, chemically, and electronically diverse class of semiconductors with applications ranging from photovoltaics to radiation detectors and sensors. Understanding neutral electron-hole excitations (excitons) is key for predicting and improving the efficiency of energy-conversion processes in these materials. First-principles calculations have played an important role in this context, allowing for a detailed insight into the formation of excitons in many different types of perovskites. Such calculations have demonstrated that excitons in some perovskites significantly deviate from canonical models due to the chemical and structural heterogeneity of these materials. In this Perspective, I provide an overview of calculations of excitons in metal-halide perovskites using Green's function-based many-body perturbation theory in the GW + Bethe-Salpeter equation approach, the prevalent method for calculating excitons in extended solids. This approach readily considers anisotropic electronic structures and dielectric screening present in many perovskites and important effects, such as spin-orbit coupling. I will show that despite this progress, the complex and diverse electronic structure of these materials and its intricate coupling to pronounced and anharmonic structural dynamics pose challenges that are currently not fully addressed within the GW + Bethe-Salpeter equation approach. I hope that this Perspective serves as an inspiration for further exploring the rich landscape of excitons in metal-halide perovskites and other complex semiconductors and for method development addressing unresolved challenges in the field.

Simultaneous Morphology and Band Structure Manipulation of BiOBr by Te Doping for Enhanced Photocatalytic Oxygen Evolution

The photocatalytic oxygen evolution of bismuth oxybromide (BiOBr) is greatly hindered by its low visible-light response and high electron-hole recombination. Nonmetal doping can effectively alleviate these issues, leading to improvement in photocatalytic performance. Herein, Bi2Te3 was introduced as both the Te doping source and the morphology-control template to improve the photocatalytic performance of BiOBr. Appropriate amounts of Te are critical to maintain the ultrathin plate-like structure of BiOBr, whereas excessive Te results in the formation of a flower-like architecture. Oxygen evolution activity disclosed that a plate-like structure is essential for realizing higher performance owing to sufficient light utilization and efficient charge separation. An optimal oxygen evolution rate of 368.0 μmol h-1 g-1 was achieved for the Te-doped sample, which is 2.3-fold as that of the undoped BiOBr (158.9 μmol h-1 g-1). Theoretical calculations demonstrated that Te doping can induce impurity levels above the valence band of BiOBr, which slightly narrowed the band gap and strengthened the light absorption in the range of 400-800 nm. More importantly, Te dopants could act as shallow traps for confining the excited electrons, thus prolonging the carrier lifetime. This work provides a novel strategy to prepare highly efficient photocatalysts by simultaneously realizing morphology manipulation and nonmetal doping.

Solar-to-H2 O2 Catalyzed by Covalent Organic Frameworks

Benefiting from the excellent structural tunability, robust framework, ultrahigh porosity, and rich active sites, covalent organic frameworks (COFs) are widely recognized as promising photocatalysts in chemical conversions, and emerged in the hydrogen peroxide (H2 O2 ) photosynthesis in 2020. H2 O2 , serving as an environmental-friendly oxidant and a promising liquid fuel, has attracted increasing researchers to explore its potential. Over the past few years, numerous COFs-based photocatalysts are developed with encouraging achievements in H2 O2 production, whereas no comprehensive review articles exist to summarize this specific and significant area. Herein we provide a systematic overview of the advances and challenges of COFs in photocatalytic H2 O2 production. We first introduce the priorities of COFs in H2 O2 photosynthesis. Then, various strategies to improve COFs photocatalytic efficiency are discussed. The perspective and outlook for future advances of COFs in this emerging field are finally offered. This timely review will pave the way for the development of highly efficient COFs photocatalysts for practical production of value-added chemicals not limited to H2 O2 .

Flexo-/Piezoelectric Polarization Boosting Exciton Dissociation in Curved Two-Dimensional Carbon Nitride Photocatalyst

Two-dimensional (2D) carbon nitride (CN) materials have received tremendous attention as photocatalysts for clean energy and environmental treatment. However, the photocatalytic efficiency of CN is constrained by the high exciton binding energy and sluggish charge kinetics due to weak dielectric screening, impeding the overall process. Herein, localized flexo-/piezoelectric polarization is introduced via strain engineering, boosting exciton dissociation and promoting charge separation to enhance the multielectron photocatalytic process. Consequently, the exciton binding energy of polarized CN is reduced from 52 to 34 meV, and the hydrogen evolution yield increased by 2.9 times compared to that of the pristine CN. For other photocatalytic reactions (e.g., H2O2 production), the polarized CN also maintained a 2.1-fold increase compared to the pristine CN. This strategy of inducing localized polarization via strain engineering provides new insights for boosting photocatalytic reactions involving electrons.

Molecular Heptazine-Triazine Junction over Carbon Nitride Frameworks for Artificial Photosynthesis of Hydrogen Peroxide

Revealing the photocatalytic mechanism between various junctions and catalytic activities has become a hotspot in photocatalytic systems. Herein, an internal molecular heptazine/triazine (H/T) junction in crystalline carbon nitride (HTCN) is constructed and devoted to selective two-electron oxygen reduction reaction (2e- ORR) for efficient hydrogen peroxide (H2 O2 ) production. In-situ X-ray diffraction spectra under various temperatures authenticate the successful formation of molecular H/T junction in HTCN during the calcining process rather than physically mixing. The increased surface photovoltage and transient photovoltage signals, and the decreased exciton binding energy undoubtably elucidate that an obvious increasement of carrier density and diffusion capability of photogenerated electrons are realized over HTCN. Additionally, the analyses of in situ photoirradiated Kelvin probe force microscopy and femto-second transient absorption spectra reveal the successful construction of the strong internal built-in-electric field and the existence of the majority of long-lived shallow trapped electrons associated with molecular H/T junction over HTCN, respectively. Benefiting from these, the photocatalytic results exhibit an incredible improvement (96.5-fold) for H2 O2 production. This novel work provides a comprehensive understanding of the long-lived reactive charges in molecular H/T junctions for strengthening the driving-force for photocatalytic H2 O2 production, which opens potential applications for enhancing PCN-based photocatalytic redox reactions.

Renaissance of elemental phosphorus materials: properties, synthesis, and applications in sustainable energy and environment

The polymorphism of phosphorus-based materials has garnered much research interest, and the variable chemical bonding structures give rise to a variety of micro and nanostructures. Among the different types of materials containing phosphorus, elemental phosphorus materials (EPMs) constitute the foundation for the synthesis of related compounds. EPMs are experiencing a renaissance in the post-graphene era, thanks to recent advancements in the scaling-down of black phosphorus, amorphous red phosphorus, violet phosphorus, and fibrous phosphorus and consequently, diverse classes of low-dimensional sheets, ribbons, and dots of EPMs with intriguing properties have been produced. The nanostructured EPMs featuring tunable bandgaps, moderate carrier mobility, and excellent optical absorption have shown great potential in energy conversion, energy storage, and environmental remediation. It is thus important to have a good understanding of the differences and interrelationships among diverse EPMs, their intrinsic physical and chemical properties, the synthesis of specific structures, and the selection of suitable nanostructures of EPMs for particular applications. In this comprehensive review, we aim to provide an in-depth analysis and discussion of the fundamental physicochemical properties, synthesis, and applications of EPMs in the areas of energy conversion, energy storage, and environmental remediation. Our evaluations are based on recent literature on well-established phosphorus allotropes and theoretical predictions of new EPMs. The objective of this review is to enhance our comprehension of the characteristics of EPMs, keep abreast of recent advances, and provide guidance for future research of EPMs in the fields of chemistry and materials science.

Regulating excitonic effects in non-oxide based XPSe3 (X = Cd, Zn) monolayers towards enhanced photocatalysis for overall water splitting

The non-oxide 2D materials have garnered considerable interest due to their potential utilization as photocatalysts, which offer a superior substitute to metal-oxide-based photocatalysts. This study investigates the impact of the dielectric environment on the size and binding energy of excitons in atomically thin, experimentally synthesized semiconducting monolayers [XPSe₃, X = (Cd, Zn)] to address the critical problem of electron-hole recombination, which significantly hinders the efficiency of most photocatalysts. We employ a precise non-hydrogenic model surpassing the hydrogenic-based Mott-Wannier model. Our findings are among the first few demonstrations of an increase in exciton size (and decrease in exciton binding energy) as environmental screening increases. These findings have implications for photocatalytic water splitting and are not limited to metal phosphorus trichalcogenides, but can be applied to other classes of 2D materials as well. This work also compares metal-oxide photocatalysts, which have been the focus of much research over the past five decades, to non-oxide-based metal phosphorus trichalcogenide photocatalysts, which offer a superior alternative due to their ability to address issues such as light-harvesting inability in the visible spectrum and unwanted charge recombination centres. Furthermore, the implications of this study extend beyond photocatalysts and are significant for the design and development of next-generation optoelectronic devices that incorporate excitonic processes, such as solar cells, photodetectors, LEDs, etc.

Functionalized 2D defect g-C3N4 for artificial photosynthesis of H2O2 and synchronizing tetracycline fluorescence detection and degradation

Artificial photosynthesis of H₂O₂ is a clean production technology, which brings the synergistic effect to photodegradation of pollutants. Inspired by defect engineering, 2D defective carbon nitride (g-C₃N₄) photocatalyst was obtained via potassium ion assisted synthesis. Defective g-C₃N₄ is protonated and applied to photosynthesis of H₂O₂, H₂O₂ concentration produced reached 477.7 μM, which was approximately 5.27 times that by pristine g-C₃N₄. Additionally, defective g-C₃N₄ materials are borrowed to synchronizing tetracycline (TC) fluorescence detection and degradation, suggesting the catalyst existed bifunctional characteristics of TC detection and degradation. Meanwhile, metal impregnation engineering (molybdenum) was borrowed enhancing the electron-trapping ability in local region of defective g-C₃N₄, which takes advantages to the efficient degradation of TC. Furthermore, optical and electrical properties of photocatalysts were investigated in details by advanced material characterization testing. This work provides potential applications in the field of artificial photosynthesis and pollution degradation.

Atomically Strained Metal Sites for Highly Efficient and Selective Photooxidation

Strain engineering is an attractive strategy for improving the intrinsic catalytic performance of heterogeneous catalysts. Manipulating strain on the short-range atomic scale to the local structure of the catalytic sites is still challenging. Herein, we successfully achieved atomic strain modulation on ultrathin layered vanadium oxide nanoribbons by an ingenious intercalation chemistry method. When trace sodium cations were introduced between the V₂O₅ layers (Na⁺-V₂O₅), the V-O bonds were stretched by the atomically strained vanadium sites, redistributing the local charges. The Na⁺-V₂O₅ demonstrated excellent photooxidation performance, which was approximately 12 and 14 times higher than that of pristine V₂O₅ and VO₂, respectively. Complementary spectroscopy analysis and theoretical calculations confirmed that the atomically strained Na⁺-V₂O₅ had a high surficial charge density, improving the activation of oxygen molecules and contributing to the excellent photocatalytic property. This work provides a new approach for the rational design of strain-equipped catalysts for selective photooxidation reactions.

Two-Dimensional Optical Waveguides at Telecom Wavelengths Based on Organic Single-Crystal Microsheets of a Charge Transfer Complex

Organic charge transfer (CT) cocrystals open a new door for the exploitation of low-dimensional near-infrared (NIR) emitters by a convenient self-assembly approach. However, research about the fabrication of sheet-like NIR-emitting microstructures that are significant for structural construction and integrated application is limited by the unidirectional molecular packing mode. Herein, via regulation of the biaxial intermolecular CT interaction, single-crystalline microsheets with remarkable NIR emission from 720 to 960 nm were synthesized via the solution self-assembly process of dithieno[3,2-b:2',3'-d]thiophene and 7,7,8,8-tetracyanoquinodimethane. The expected sheet-like structure is conducive to achieving a two-dimensional (2D) optical waveguide with an ultralow optical loss rate of 0.250 dB/μm at 860 nm. More significantly, these as-prepared organic microsheets with tunable thicknesses (h) from 100 to 1100 nm exhibit thickness-dependent NIR optical transportation performance. These findings could pave the way to a new class of low-dimensional NIR emitters for 2D photonics at telecom wavelengths.

Boosted Photoreforming of Plastic Waste via Defect-Rich NiPS3 Nanosheets

Sustainable conversion of plastic waste to mitigate environmental threats and reclaim waste value is important. Ambient-condition photoreforming is practically attractive to convert waste to hydrogen (H₂); however, it has poor performance because of mutual constraint between proton reduction and substrate oxidation. Here, we realize a cooperative photoredox using defect-rich chalcogenide nanosheet-coupled photocatalysts, e.g., d-NiPS₃/CdS, to give an ultrahigh H₂ evolution of ∼40 mmol g_cat^-1 h^-1 and organic acid yield up to 78 μmol within 9 h, together with excellent stability beyond 100 h in photoreforming of commercial waste plastic poly(lactic acid) and poly(ethylene terephthalate). Significantly, these metrics represent one of the most efficient plastic photoreforming reported. In situ ultrafast spectroscopic studies confirm a charge transfer-mediated reaction mechanism in which d-NiPS₃ rapidly extracts electrons from CdS to boost H₂ evolution, favoring hole-dominated substrate oxidation to improve overall efficiency. This work opens practical avenues for converting plastic waste into fuels and chemicals.

Non-radical degradation of organic pharmaceuticals by g-C3N4 under visible light irradiation: The overlooked role of excitonic energy transfer

In this work, an excitonic energy transfer (EET) based non-radical mechanism was proposed for the degradation of organic pharmaceuticals by graphitic carbon nitride (g-C₃N₄) under visible light irradiation. Using diclofenac (DCF) as a model molecule, the competition between single electron transfer (SET) and EET was studied through modulating the exciton binding energy of g-C₃N₄. The different mechanisms of SET and EET for DCF degradation were predicted by DFT calculation, and further confirmed by their different degradation pathways. When EET played an important role, the rationality of some very popular radical scavengers, such as p-BQ, TEMPOL and furfuryl alcohol must be reconsidered. In addition, humic acid (HA) had a distinct effect on EET and SET. Specifically, HA enhanced the EET process through photosensitization, but suppressed SET through radical quenching effect. The effect of HA on DCF degradation depended on the contribution ratio of SET and ET.

Understanding Aerobic Nitrogen Photooxidation on Titania through In Situ Time-Resolved Spectroscopy

Nitrate is an important raw material for chemical fertilizers, but it is industrially manufactured in multiple steps at high temperature and pressure, urgently motivating the design of a green and sustainable strategy for nitrate production. We report the photosynthesis of nitrate from N₂ and O₂ on commercial TiO₂ in a flow reactor under ambient conditions. The TiO₂ photocatalyst offered a high nitrate yield of 1.85 μmol h^-1 as well as a solar-to-nitrate energy conversion efficiency up to 0.13 %. We combined reactivity and in situ Fourier transform infrared spectroscopy to elucidate the mechanism of nitrate formation and unveil the special role of O₂ in N≡N bond dissociation. The mechanistic insight into charge-involved N₂ oxidation was further demonstrated by in situ transient absorption spectroscopy and electron paramagnetic resonance. This work exhibits the mechanistic origin of N₂ photooxidation and initiates a potential method for triggering inert catalytic reactions.

Enhanced Exciton Effect and Singlet Oxygen Generation Triggered by Tunable Oxygen Vacancies on Bi2MoO6 for Efficient Photocatalytic Degradation of Sodium Pentachlorophenol

Construction of the tunable oxygen vacancies (OVs) is widely utilized to accelerate molecular oxygen activation for boosting photocatalytic performance. Herein, the in-situ introduction of OVs on Bi2MoO6 was accomplished using a calcination treatment in an H2/Ar atmosphere. The introduced OVs can not only facilitate carrier separation, but also strengthen the exciton effect, which accelerates singlet oxygen generation through the energy transfer process. Superior carrier separation and abundant singlet oxygen played a crucial role in favoring photocatalytic NaPCP degradation. The optimal BMO-001-300 sample exhibited the fastest NaPCP degradation rate of 0.033 min-1, about 3.8 times higher than that of the pristine Bi2MoO6. NaPCP was effectively degraded and mineralized mainly through dechlorination, dehydroxylation and benzene ring opening. The present work will shed light on the construction and roles of OVs in semiconductor-based photocatalysis and provide a novel insight into ROS-mediated photocatalytic degradation.

An inorganic-organic hybrid nanomaterial with a core-shell structure constructed by using Mn-BTC and Ag5[BW12O40] for supercapacitors and photocatalytic dye degradation

Creating inorganic-organic hybrids with polyoxometalates (POMs) and metal-organic frameworks (MOFs) as energy storage and dye-degradation materials remains challenging. Here, a new hybrid nanomaterial Mn-BTC@Ag₅[BW₁₂O₄₀] is synthesized by using Ag₅[BW₁₂O₄₀] and Mn₃(BTC)₂(H₂O)₆ (Mn-BTC, BTC = 1,3,5-benzenetricarboxylic acid) through a plain grinding method. The structure and morphology characterization by scanning electron microscopy (SEM), powder X-ray diffraction (XRD), and transmission electron microscopy (TEM) shows that the synthetic products have core-shell construction. Due to its unique structure wherein the core is Mn-BTC and the shell is Ag₅[BW₁₂O₄₀], it exhibits excellent capacitance performance. In a three-electrode system where nickel foam is a collector, at a current density of 1 A g^-1, its specific capacitance is 198.09 F g^-1; after 5000 cycles, the capacitance retention rate is 94.4%. When the power density is 503.1 W kg^-1, the symmetrical supercapacitor reveals a high energy density which is 10.9 W h kg^-1. At the same time, the capacitance retention is 92.9% after 5000 cycles which showed good cycle stability. The photocatalytic degradation efficiencies of rhodamine B (RhB), methyl orange (MO) and methylene blue (MB) dyes exceed 90% after 140 min, and the degradation results remained unchanged after five photocatalytic cycles. The photocatalytic degradation mechanism shows that ˙OH has a major effect. The results show that this research provides a fresh idea for the development of energy storage and dye photocatalytic degradation materials.

Screen-printed p-n BiOCl/BiFeO3 heterojunctions for efficient photocatalytic degradation of Rhodamine B

Colloidal-free screen-printed p-n BiOCl/BiFeO3 heterojunctions are successfully synthesized to achieve photocatalytic degradation of Rhodamine B (RhB) using visible light (λ ≥ 400 nm). The crystalline structure of dense BiOCl nanosheets self-assembled with impressive aspect ratio atop BFO powders is confirmed by XRD, Raman and TEM measurements. Iron impurities inside these 10 ± 2 nm-thick BiOCl nanosheets increase visible light absorption. Fluorescent Rhodamine B (RhB) dye degradation is used to evaluate the photocatalytic performance of this unique heterojunction material. For optimal metal-enhanced RhB degradation, a few nanometers of platinum are deposited using the sputtering technique to act as a cocatalyst. This unique architecture yields an impressive 92% RhB degradation in only 150 min under visible light. Operating at near-neutral pH, the proposed approach also addresses the key issue of catalysis recovery, which remains one of the main drawbacks of current photocatalysis technologies.

Suppressing the Excitonic Effect in Covalent Organic Frameworks for Metal-Free Hydrogen Generation

Photocatalytic hydrogen generation is a promising solution for renewable energy production and plays a role in achieving carbon neutrality. Covalent organic frameworks (COFs) with highly designable backbones and inherent pores have emerged as novel photocatalysts, yet the strong excitonic effect in COFs can impede the promotion of energy conversion efficiency. Here, we propose a facile approach to suppress the excitonic effect in COFs, which is by narrowing the band gap and increasing the dielectric screening via a rational backbone design and chemical modifications. Based on the GW-BSE method, we uncover a linear relationship between the electronic dielectric constant and the inverse square of the optical band gap of COFs of the Lieb lattice. We further demonstrate that both reduced exciton binding energy and enhanced sunlight absorption can be simultaneously realized in COFs with a narrow band gap. Specifically, we show that one of our designed COFs whose exciton binding energy is nearly half that of g-C₃N₄ is capable of metal-free hydrogen production under near-infrared light irradiation. Our results showcase an effective method to suppress the excitonic effect in COFs and also pave the way for their applications in photocatalytic, photovoltaic, and other related solar energy conversions.

Metalated covalent organic frameworks: from synthetic strategies to diverse applications

Covalent organic frameworks (COFs) are a class of organic crystalline porous materials discovered in the early 21st century that have become an attractive class of emerging materials due to their high crystallinity, intrinsic porosity, structural regularity, diverse functionality, design flexibility, and outstanding stability. However, many chemical and physical properties strongly depend on the presence of metal ions in materials for advanced applications, but metal-free COFs do not have these properties and are therefore excluded from such applications. Metalated COFs formed by combining COFs with metal ions, while retaining the advantages of COFs, have additional intriguing properties and applications, and have attracted considerable attention over the past decade. This review presents all aspects of metalated COFs, from synthetic strategies to various applications, in the hope of promoting the continued development of this young field.

Triplet Energy Transfer from Lead Halide Perovskite for Highly Selective Photocatalytic 2 + 2 Cycloaddition

Triplet excitons are generally confined within a semiconductor. Hence, solar energy utilization via direct triplet energy transfer (TET) from semiconductors is challenging. TET from lead halide perovskite semiconductors to nearby organic molecules has been illustrated with ultrafast spectroscopy. Direct utilization of solar energy, i.e., visible light, via TET for photocatalysis is an important route but has not yet been demonstrated with lead halide perovskite semiconductors. Here, we show that a photocatalytic reaction, focusing on a 2 + 2 cycloaddition reaction, can been successfully demonstrated via TET from lead halide perovskite nanocrystals (PNCs). The triplet excitons are shown to induce a highly diastereomeric syn-selective 2 + 2 cycloaddition starting from olefins. Such photocatalytic reactions probe the TET process previously only observed spectroscopically. Moreover, our observation demonstrates that bulk-like PNCs (size, >10 nm; PL = 530 nm), in addition to quantum-confined smaller PNCs, are also effective for TET. Our findings may render a new energy conversion pathway to employ PNCs via direct TET for photocatalytic organic synthesis.

Two-dimensional transition metal dichalcogenides as an emerging platform for singlet fission solar cells

Singlet fission, a rapid exciton doubling process via inverse Auger recombination, is recognized as one of the most practical and feasible means for overcoming the Shockley-Queisser limit. Singlet fission solar cells are generally developed by integrating photon downconversion organic semiconductors into conventional photovoltaic devices to break the maximum photovoltaic response of the host semiconductors by virtue of extra triplet excitons. In this regard, proper matching of two different semiconductors and heterointerface engineering are both crucial for highly efficient singlet fission solar cells. Therefore, the aim of this study is to review the prerequisite conditions for efficient triplet transfer at the heterointerfaces and thus highlight the robust spin and valley degrees of freedom of transition metal dichalcogenides with the ultimate goal of stimulating research into next-generation singlet fission solar cells.

Unlocking bimetallic active sites via a desalination strategy for photocatalytic reduction of atmospheric carbon dioxide

Ultrathin two-dimensional (2D) metal oxyhalides exhibit outstanding photocatalytic properties with unique electronic and interfacial structures. Compared with monometallic oxyhalides, bimetallic oxyhalides are less explored. In this work, we have developed a novel top-down wet-chemistry desalination approach to remove the alkali-halide salt layer within the complicated precursor bulk structural matrix Pb_0.6Bi_1.4Cs_0.6O₂Cl₂, and successfully fabricate a new 2D ultrathin bimetallic oxyhalide Pb_0.6Bi_1.4O₂Cl_1.4. The unlocked larger surface area, rich bimetallic active sites, and faster carrier dynamics within Pb_0.6Bi_1.4O₂Cl_1.4 layers significantly enhance the photocatalytic efficiency for atmospheric CO₂ reduction. It outperforms the corresponding parental matrix phase and other state-of-the-art bismuth-based monometallic oxyhalides photocatalysts. This work reports a top-down desalination strategy to engineering ultrathin bimetallic 2D material for photocatalytic atmospheric CO₂ reduction, which sheds light on further constructing other ultrathin 2D catalysts for environmental and energy applications from similar complicate structure matrixes.

Atomically Surficial Modulation in Two-Dimensional Semiconductor Nanocrystals for Selective Photocatalytic Reactions

Photocatalysis, directly converting solar energy into chemical energy, is identified as an ideal strategy to reduce the increasing consumption of fossil fuels and facilitate carbon neutralization. In the past few years, a great number of endeavors have been devoted to developing photocatalysts with a high conversion efficiency and selectivity. Atomically surficial modulation strategies, including surface vacancies, single-atom modification, and dual-site components, exhibited positive impacts on tuning key steps of photocatalytic reactions. In this mini-review, we focus on the latest progress of the atomically surficial modulations on two-dimensional semiconductor photocatalysts and their role in enhancing selectively photocatalytic performance. We hope that this mini-review could provide new insights for researchers on nanosynthesis and photocatalysis.

A physicochemical introspection of porous organic polymer photocatalysts for wastewater treatment

A detailed physicochemical explanation for experimental observations is provided for POPs as powerful photocatalysts for organic transformations and wastewater decontamination.

Dual Enhancement of Carrier Generation and Migration on Au/g-C3N4 photocatalysts for High-Efficient Broadband PET-RAFT Polymerization

Photo-induced electron/energy transfer RAFT (PET-RAFT) polymerization can produce well-defined polymers with spatio-temporal control. Semiconductor graphitic carbon nitride (g-C3N4) as thermally and chemically stable photocatalyst, has achieved PET-RAFT method under UV-irradiation...

Pb3SBrI3: The first Pb-based chalcohalide with multiple halogens features unique two-dimensional structure composed of diverse Pb-centered polyhedra

Chalcohalides are attractive multifunctional material candidates due to their diverse crystal structures and the merits fused from chalcogenides and halides. Here, we successfully synthesized a new Pb-based chalcohalide with multiple-halogens,...

Dynamic Active Sites in Bi5O7I Promoted by Surface Tensile Strain Enable Selective Visible Light CO2 Photoreduction

Surface defects with abundant localized electrons on bismuth oxyhalide catalysts are proved to have the capability to capture and activate CO₂. However, bismuth oxyhalide materials are susceptible to photocorrosion, making the surface defects easily deactivated and therefore losing their function as active sites. Construction of deactivation-resistant surface defects on catalyst is essential for stable CO₂ photoreduction, but is a universal challenge. In this work, the Bi₅O₇I nanotubes with surface tensile strain are synthesized, which are favorable for the visible light-induced dynamic I defects generation. The CO₂ molecules absorbed on I defects are constantly reduced by the incoming photogenerated electrons from I-deficient Bi₅O₇I nanotubes and the successive protonation of CO₂ molecules is thus highly promoted, realizing the selective CO₂ conversion process via the route of CO₂-COOH^--CO. The efficient and stable photoreduction of CO₂ into CO with 100% selectivity can be achieved even under visible light (λ >420 nm) irradiation benefited from the dynamic I defects as active sites. The results presented herein demonstrate the unique action mechanism of light-induced dynamic defects during CO₂ photoreduction process and provide a new strategy into rational design of deactivation-resistant catalysts for selective CO₂ photoreduction.

Designed polymeric conjugation motivates tunable activation of molecular oxygen in heterogeneous organic photosynthesis

Photocatalytic oxidative organic reactions are important synthetic transformations, and research on reaction selectivity by reactive oxygen species (ROS) is significant. To date, however, there has rarely been any focus on the directed generation of ROSs. Herein, we report the first identification of tunable molecular oxygen activation induced by polymeric conjugation in nonmetallic conjugated microporous polymers (CMP). The conjugation between these can be achieved by the introduction of alkynyl groups. CMP-A with an alkynyl bridge facilitates the intramolecular charge mobility while CMP-D, lacking an alkynyl group enhances the photoexcited carrier build-up on the surface from diffusion. These different processes dominate the directed ROS generation of the superoxide radical (O₂^-) and singlet oxygen (¹O₂), respectively. This theory is substantiated by the different performances of these CMPs in the aerobic oxidation of sulfides and the dehydrogenative coupling of amines, and could provide insight into the rational design of CMPs for various heterogeneous organic photosynthesis.

Efficient Combination of G-C3 N4 and CDs for Enhanced Photocatalytic Performance: A Review of Synthesis, Strategies, and Applications

Recently, heterogeneous photocatalysts have achieved much interest on account of their great potential applications in resolving many tough energy and environmental troubles around the world through an ecologically sustainable way. Heterogeneous nanocomposites composed of graphitic carbon nitride (g-C₃ N₄ ) and carbon dots (CDs) possess broad spectrum absorption, appropriate electronic band structures, rapid carrier mobility, abundant reserves, excellent chemical stability, and facile synthesis methods, which make them promising composite photocatalysts for suitable applications such as photocatalytic solar fuels production and contaminant decomposition. With the rapid development in photocatalysis by hybridization of g-C₃ N₄ and CDs, a systematic summary and prospection of performance improvement are urgent and meaningful. This review first focuses on various kinds of effectively synthetic methods of composites. Following, the strategies available for enhanced performance, including morphology optimization, spectral absorption improvement, ternary or quaternary composition hybrid, lateral or vertical heterostructures construction, heteroatom doping, and so forth, are fully discussed. Then, the applications mainly in efficient photocatalytic hydrogen generation, photocatalytic carbon dioxide reduction, and organic pollutants degradation are systematically demonstrated. Finally, the remaining issues and prospect of further development are proposed as some kind of guidance for powerful combination of g-C₃ N₄ and CDs with high efficiency to photocatalysis.

Photocatalytic H2O Overall Splitting into H2 Bubbles by Single Atomic Sulfur Vacancy CdS with Spin Polarization Electric Field

Low efficient transfer of photogenerated charge carriers to redox sites along with high surface reaction barrier is a bottleneck problem of photocatalytic H₂O overall splitting. Here, in the absence of cocatalysts, H₂O overall splitting has been achieved by single-atomic S vacancy hexagonal CdS with a spin polarization electric field (PEF). Theoretical and experimental results confirm that single-atomic S vacancy-induced spin PEF with opposite direction to the Coulomb field accelerates charge carrier transport dynamics from the bulk phase to surface-redox sites. By systematically tuning the spin PEF intensity with single-atomic S vacancy content, common pristine CdS is converted to a photocatalyst that can efficiently complete H₂O overall splitting by releasing a great number of H₂ bubbles under natural solar light. This work solves the bottleneck of solar energy conversion in essence by single atom vacancy engineering, which will promote significant photocatalytic performance enhancement for commercialization.

Ultrathin Crystalline Covalent-Triazine-Framework Nanosheets with Electron Donor Groups for Synergistically Enhanced Photocatalytic Water Splitting

Ultrathin nanosheets have great potential for photocatalytic applications, however, suffer from enlarged band gap and narrowed visible-light-responsive range due to the quantum confinement effect. Herein, we report a novel redox strategy for efficient preparation of ultrathin crystalline amide-functionalized covalent-triazine-framework nanosheets (CTF NSs) with enhanced visible light absorption. The CTF NSs exhibited photocatalytic hydrogen (512.3 μmol h^-1 ) and oxygen (12.37 μmol h^-1 ) evolution rates much higher than that of pristine bulk CTF. Photocatalytic overall water splitting could be achieved with efficient stoichiometric H₂ (5.13 μmol h^-1 ) and O₂ (2.53 μmol h^-1 ) evolution rates under visible light irradiation. Experimental and theoretical analysis revealed that introduction of amide groups as electron donor optimized the band structure and improve its visible-light absorption, hydrophilicity and carrier separation efficiency, thus resulting in the enhanced photocatalytic performance. The well-dispersed CTF NSs could be easily cast onto a support as a thin film device and demonstrate excellent photocatalytic activity (25.7 mmol h^-1  m^-2 for hydrogen evolution).