Micromechanism in All-Solid-State Alloy-Metal Batteries: Regulating Homogeneous Lithium Precipitation and Flexible Solid Electrolyte Interphase Evolution

In Situ Electrochemical Atomic Force Microscopy: From Interfaces to Interphases

The electrochemical interface formed between an electrode and an electrolyte significantly affects the rate and mechanism of the electrode reaction through its structure and properties, which vary across the interface. The scope of the interface has been expanded, along with the development of energy electrochemistry, where a solid-electrolyte interphase may form on the electrode and the active materials change properties near the surface region. Developing a comprehensive understanding of electrochemical interfaces and interphases necessitates three-dimensional spatial resolution characterization. Atomic force microscopy (AFM) offers advantages of imaging and long-range force measurements. Here we assess the capabilities of AFM by comparing the force curves of different regimes and various imaging modes for in situ characterizing of electrochemical interfaces and interphases. Selected examples of progress on work related to the structures and processes of electrode surfaces, electrical double layers, and lithium battery systems are subsequently illustrated. Finally, this review provides perspectives on the future development of electrochemical AFM.

Electrochemical behavior of elemental alloy anodes in solid-state batteries

Lithium alloy anodes in the form of dense foils offer significant potential advantages over lithium metal and particulate alloy anodes for solid-state batteries (SSBs). However, the reaction and degradation mechanisms of dense alloy anodes remain largely unexplored. Here, we investigate the electrochemical lithiation/delithiation behavior of 12 elemental alloy anodes in SSBs with Li6PS5Cl solid-state electrolyte (SSE), enabling direct behavioral comparisons. The materials show highly divergent first-cycle Coulombic efficiency, ranging from 99.3% for indium to ∼20% for antimony. Through microstructural imaging and electrochemical testing, we identify lithium trapping within the foil during delithiation as the principal reason for low Coulombic efficiency in most materials. The exceptional Coulombic efficiency of indium is found to be due to unique delithiation reaction front morphology evolution in which the high-diffusivity LiIn phase remains at the SSE interface. This study links composition to reaction behavior for alloy anodes and thus provides guidance toward better SSBs.

Dual-ion conductors: from liquid to solid

The traditional working principle within lithium-ion batteries relies on Li+ shuttling between the cathode and anode, namely the rocking-chair mechanism. A single working ion constrains the possibilities for battery design and the selection of electrode materials, while realizing multiple working ions offers the potential to break through the fundamental principles of traditional battery construction. Accordingly, it is necessary to develop dual-ion conductors to enable the migration of multiple working ions. This focus article starts by introducing traditional dual-ion batteries based on liquid electrolytes and their pros and cons. Then, solidifying liquid dual-ion conductors is expected to overcome these drawbacks, so the development of solid dual-ion conductors is discussed in detail. Specifically, basic design principles of solid dual-ion conductors are briefly proposed, including constructing continuous ion transport channels and choosing appropriately sized ion carriers. The potential applications of solid dual-ion conductors are also summarized, such as stabilizing the electrode/electrolyte interface and activating additional redox couples. The goal of this article is to inspire researchers in the development of dual-ion conductors and to contribute to the advancement of all-solid-state batteries.

Granulation of hydrometallurgically synthesized spinel lithium manganese oxide using cross-linked chitosan for lithium adsorption from water

A drastic increase in demand for electric vehicles and energy storage systems increases lithium (Li) need as a critical metal for the 21st century. Lithium manganese oxides stand out among inorganic adsorbents because of their high capacity, chemical stability, selectivity, and affordability for lithium recovery from aqueous media. This study investigates using hydrometallurgically synthesized lithium manganese oxide (Li1.6Mn1.6O4) in granular form coated with cross-linked chitosan for lithium recovery from water. Characterization methods such as SEM, FTIR, XRD, and BET reveal the successful synthesis of the composite adsorbent. Granular cross-linked chitosan-coated and delithiated lithium manganese oxide (CTS/HMO) adsorbent demonstrated optimal removal efficiency of 86 % at pH 12 with 4 g/L of adsorbent dosage. The Langmuir isotherm at 25 °C, which showed monolayer adsorption with a maximum capacity of 4.94 mg/g, a better fit for the adsorption behavior of CTS/HMO. Adsorption was endothermic and thermodynamically spontaneous. Lithium adsorption followed the pseudo-first-order kinetic model.

Artificial LiF-Rich Interface Enabled by In situ Electrochemical Fluorination for Stable Lithium-Metal Batteries

Lithium (Li)-metal batteries are promising next-generation energy storage systems. One drawback of uncontrollable electrolyte degradation is the ability to form a fragile and nonuniform solid electrolyte interface (SEI). In this study, we propose the use of a fluorinated carbon nanotube (CNT) macrofilm (CMF) on Li metal as a hybrid anode, which can regulate the redox state at the anode/electrolyte interface. Due to the favorable reaction energy between the plated Li and fluorinated CNTs, the metal can be fluorinated directly to a LiF-rich SEI during the charging process, leading to a high Young's modulus (~2.0 GPa) and fast ionic transfer (~2.59×10-7  S cm-1 ). The obtained SEI can guide the homogeneous plating/stripping of Li during electrochemical processes while suppressing dendrite growth. In particular, the hybrid of endowed full cells with substantially enhanced cyclability allows for high capacity retention (~99.3 %) and remarkable rate capacity. This work can extend fluorination technology into a platform to control artificial SEI formation in Li-metal batteries, increasing the stability and long-term performance of the resulting material.

Polymeric Electronic Shielding Layer Enabling Superior Dendrite Suppression for All-Solid-State Lithium Batteries

LiBH4 is one of the most promising candidates for use in all-solid-state lithium batteries. However, the main challenges of LiBH4 are the poor Li-ion conductivity at room temperature, excessive dendrite formation, and the narrow voltage window, which hamper practical application. Herein, we fabricate a flexible polymeric electronic shielding layer on the particle surfaces of LiBH4. The electronic conductivity of the primary LiBH4 is reduced by 2 orders of magnitude, to 1.15 × 10-9 S cm-1 at 25 °C, due to the high electron affinity of the electronic shielding layer; this localizes the electrons around the BH4- anions, which eliminates electronic leakage from the anionic framework and leads to a 68-fold higher critical electrical bias for dendrite growth on the particle surfaces. Contrary to the previously reported work, the shielding layer also ensures fast Li-ion conduction due to the fast-rotational dynamics of the BH4- species and the high Li-ion (carrier) concentration on the particle surfaces. In addition, the flexibility of the layer guarantees its structural integrity during Li plating and stripping. Therefore, our LiBH4-based solid-state electrolyte exhibits a high critical current density (11.43 mA cm-2) and long cycling stability of 5000 h (5.70 mA cm-2) at 25 °C. More importantly, the electrolyte had a wide operational temperature window (-30-150 °C). We believe that our findings provide a perspective with which to avoid dendrite formation in hydride solid-state electrolytes and provide high-performance all-solid-state lithium batteries.

Insight into Dendrites Issue in All Solid-State Batteries with Inorganic Electrolyte: Mechanism, Detection and Suppression Strategies

All solid-state batteries (ASSBs) are regarded as one of the promising next-generation energy storage devices due to their expected high energy density and capacity. However, failures due to unrestricted growth of lithium dendrites (LDs) have been a critical problem. Moreover, the understanding of dendrite growth inside solid-state electrolytes is limited. Since the dendrite process is a multi-physical field coupled process, including electrical, chemical, and mechanical factors, no definitive conclusion can summarize the root cause of LDs growth in ASSBs till now. Herein, the existing works on mechanism, identification, and solution strategies of LD in ASSBs with inorganic electrolyte are reviewed in detail. The primary triggers are thought to originate mainly at the interface and within the electrolyte, involving mechanical imperfections, inhomogeneous ion transport, inhomogeneous electronic structure, and poor interfacial contact. Finally, some of the representative works and present an outlook are comprehensively summarized, providing a basis and guidance for further research to realize efficient ASSBs for practical applications.

In-Situ-Generated Electron-Blocking LiH Enabling an Unprecedented Critical Current Density of Over 15 mA cm-2 for Solid-State Hydride Electrolytes

LiBH4 is a promising solid-state electrolyte (SE) due to its thermodynamic stability to Li. However, poor Li-ion conductivities at room temperature, low oxidative stabilities, and severe dendrite growth hamper its application. In this work, a partial dehydrogenation strategy is adopted to in situ generate an electronic blocking layer dispersed of LiH, addressing the above three issues simultaneously. The electrically insulated LiH reduces the electronic conductivity by two orders of magnitude, leading to a 32.0-times higher critical electrical bias for dendrite growth on the particle surfaces than that of the counterpart. Additionally, this layer not only promotes the Li-ion conductance by stimulating coordinated rotations of BH4 - and B12 H12 2- , contributing to a Li-ion conductivity of 1.38 × 10-3 S cm-1 at 25 °C, but also greatly enhances oxidation stability by localizing the electron density on BH4 - , extending its voltage window to 6.0 V. Consequently, this electrolyte exhibits an unprecedented critical current density (CCD) of 15.12 mA cm-2 at 25 °C, long-term Li plating and stripping stability for 2700 h, and a wide temperature window for dendrite inhibition from -30 to 150 °C. Its Li-LiCoO2 cell displays high reversibility within 3.0-5.0 V. It is believed that this work provides a clear direction for solid-state hydride electrolytes.

Electrolytes in Organic Batteries

Organic batteries using redox-active polymers and small organic compounds have become promising candidates for next-generation energy storage devices due to the abundance, environmental benignity, and diverse nature of organic resources. To date, tremendous research efforts have been devoted to developing advanced organic electrode materials and understanding the material structure-performance correlation in organic batteries. In contrast, less attention was paid to the correlation between electrolyte structure and battery performance, despite the critical roles of electrolytes for the dissolution of organic electrode materials, the formation of the electrode-electrolyte interphase, and the solvation/desolvation of charge carriers. In this review, we discuss the prospects and challenges of organic batteries with an emphasis on electrolytes. The differences between organic and inorganic batteries in terms of electrolyte property requirements and charge storage mechanisms are elucidated. To provide a comprehensive and thorough overview of the electrolyte development in organic batteries, the electrolytes are divided into four categories including organic liquid electrolytes, aqueous electrolytes, inorganic solid electrolytes, and polymer-based electrolytes, to introduce different components, concentrations, additives, and applications in various organic batteries with different charge carriers, interphases, and separators. The perspectives and outlook for the future development of advanced electrolytes are also discussed to provide a guidance for the electrolyte design and optimization in organic batteries. We believe that this review will stimulate an in-depth study of electrolytes and accelerate the commercialization of organic batteries.

Stable Anode-Free All-Solid-State Lithium Battery through Tuned Metal Wetting on the Copper Current Collector

A stable anode-free all-solid-state battery (AF-ASSB) with sulfide-based solid-electrolyte (SE) (argyrodite Li₆ PS₅ Cl) is achieved by tuning wetting of lithium metal on "empty" copper current-collector. Lithiophilic 1 µm Li₂ Te is synthesized by exposing the collector to tellurium vapor, followed by in situ Li activation during the first charge. The Li₂ Te significantly reduces the electrodeposition/electrodissolution overpotentials and improves Coulombic efficiency (CE). During continuous electrodeposition experiments using half-cells (1 mA cm^-2 ), the accumulated thickness of electrodeposited Li on Li₂ Te-Cu is more than 70 µm, which is the thickness of the Li foil counter-electrode. Full AF-ASSB with NMC811 cathode delivers an initial CE of 83% at 0.2C, with a cycling CE above 99%. Cryogenic focused ion beam (Cryo-FIB) sectioning demonstrates uniform electrodeposited metal microstructure, with no signs of voids or dendrites at the collector-SE interface. Electrodissolution is uniform and complete, with Li₂ Te remaining structurally stable and adherent. By contrast, an unmodified Cu current-collector promotes inhomogeneous Li electrodeposition/electrodissolution, electrochemically inactive "dead metal," dendrites that extend into SE, and thick non-uniform solid electrolyte interphase (SEI) interspersed with pores. Density functional theory (DFT) and mesoscale calculations provide complementary insight regarding nucleation-growth behavior. Unlike conventional liquid-electrolyte metal batteries, the role of current collector/support lithiophilicity has not been explored for emerging AF-ASSBs.

Room-Temperature Anode-Less All-Solid-State Batteries via the Conversion Reaction of Metal Fluorides

All-solid-state batteries (ASSBs) that employ anode-less electrodes have drawn attention from across the battery community because they offer competitive energy densities and a markedly improved cycle life. Nevertheless, the composite matrices of anode-less electrodes impose a substantial barrier for lithium-ion diffusion and inhibit operation at room temperature. To overcome this drawback, here, the conversion reaction of metal fluorides is exploited because metallic nanodomains formed during this reaction induce an alloying reaction with lithium ions for uniform and sustainable lithium (de)plating. Lithium fluoride (LiF), another product of the conversion reaction, prevents the agglomeration of the metallic nanodomains and also protects the electrode from fatal lithium dendrite growth. A systematic analysis identifies silver (I) fluoride (AgF) as the most suitable metal fluoride because the silver nanodomains can accommodate the solid-solution mechanism with a low nucleation overpotential. AgF-based full cells attain reliable cycling at 25 °C even with an exceptionally high areal capacity of 9.7 mAh cm^-2 (areal loading of LiNi_0.8 Co_0.1 Mn_0.1 O₂  = 50 mg cm^-2 ). These results offer useful insights into designing materials for anode-less electrodes for sulfide-based ASSBs.

On-Surface Synthesis toward Two-Dimensional Polymers

Two-dimensional (2D) polymers have garnered widespread interest because of their intriguing physicochemical properties. Envisaged applications in fields including nanodevices, solid-state chemistry, physical organic chemistry, and condensed matter physics, however, demand high-quality and large-scale production. In this perspective, we first introduce exotic band structures of organic frameworks holding honeycomb, kagome, and Lieb lattices. We further discuss how mesoscale ordered 2D polymers can be synthesized by means of choosing suitable monomers and optimizing growth conditions. We describe successful polymerization strategies to introducing a non-benzenoid subunit into a π-conjugated carbon lattice via delicately designed monomer precursors. Also, to obviate transfer and restore the intrinsic properties of π-conjugated polymers, new paradigms of aryl-aryl coupling on inert surfaces are discussed. Recent achievements in the photopolymerization demonstrate the need for monomer design. We conclude the potential applications of these organic networks and project the future possibilities in providing new insights into on-surface polymerization.

p-d Orbital Hybridization Induced by a Monodispersed Ga Site on a Pt3 Mn Nanocatalyst Boosts Ethanol Electrooxidation

Constructing monodispersed metal sites in heterocatalysis is an efficient strategy to boost their catalytic performance. Herein, a new strategy using monodispersed metal sites to tailor Pt-based nanocatalysts is addressed by engineering unconventional p-d orbital hybridization. Thus, monodispersed Ga on Pt₃ Mn nanocrystals (Ga-O-Pt₃ Mn) with high-indexed facets was constructed for the first time to drive ethanol electrooxidation reaction (EOR). Strikingly, the Ga-O-Pt₃ Mn nanocatalyst shows an enhanced EOR performance with achieving 8.41 times of specific activity than that of Pt/C. The electrochemical in situ Fourier transform infrared spectroscopy results and theoretical calculations disclose that the Ga-O-Pt₃ Mn nanocatalyst featuring an unconventional p-d orbital hybridization not only promote the C-C bond-breaking and rapid oxidation of -OH of ethanol, but also inhibit the generation of poisonous CO intermediate species. This work discloses a promising strategy to construct a novel nanocatalysts tailored by monodispersed metal site as efficient fuel cell catalysts.

The carrier transition from Li atoms to Li vacancies in solid-state lithium alloy anodes

The stable cycling of energy-dense solid-state batteries is highly relied on the kinetically stable solid-state Li alloying reactions. The Li metal precipitation at solid-solid interfaces is the primary cause of interface fluctuations and battery failures, whose formation requires a clear mechanism interpretation, especially on the key kinetic short board. Here, we introduce the lithium alloy anode as a model system to quantify the Li kinetic evolution and transition from the alloying reaction to the metal deposition in solid-state batteries, identifying that there is a carrier transition from Li atoms to Li vacancies during lithiation processes. The rate-determining step is charge transfer or Li atom diffusion at different lithiation stages.