Efficient Z-Selective Olefin-Acrylamide Cross-Metathesis Enabled by Sterically Demanding Cyclometalated Ruthenium Catalysts

Stereoselective Copper-Catalyzed Olefination of Imines

Alkenes are an important class of organic molecules found among synthetic intermediates and bioactive compounds. They are commonly synthesized through stoichiometric Wittig-type olefination of carbonyls and imines, using ylides or their equivalents. Despite the importance of Wittig-type olefination reactions, their catalytic variants remain underdeveloped. We explored the use of transition metal catalysis to form ylide equivalents from readily available starting materials. Our investigation led to a new copper-catalyzed olefination of imines with alkenyl boronate esters as coupling partners. We identified a heterobimetallic complex, obtained by hydrocupration of the alkenyl boronate esters, as the key catalytic intermediate that serves as an ylide equivalent. The high E-selectivity observed in the reaction is due to the stereoselective addition of this intermediate to an imine, followed by stereospecific anti-elimination.

Development of Highly Enantio- and Z-Selective Grubbs Catalysts via Controllable C-H Bond Activation

Asymmetric olefin metathesis is a powerful strategy for stereocontrolled synthesis that allows the formation of chiral elements in conjunction with carbon-carbon double bonds. Here, we report a new series of cyclometalated stereogenic-at-Ru catalysts that enable highly efficient asymmetric ring opening/cross-metathesis (AROCM) and asymmetric ring-closing metathesis (ARCM) reactions. Single enantiomers of these catalysts with either right-handed or left-handed configurations at the Ru center can be easily accessed via highly stereoselective C-H bond activation-based cyclometalation. Right-handed chiral Ru catalysts enabled the Z- and enantioselective AROCM of a wide range of norbornenes and terminal alkenes, generating densely functionalized cyclopentanes with excellent stereo- and enantioselectivities (99:1 Z/E, up to 99% ee). Left-handed chiral Ru catalysts enabled the facile ARCM of sterically unhindered, all-terminal prochiral trienes, which had not been achieved by previous Ru catalysts, providing simple cyclic ethers and amides with tertiary or quaternary carbon stereocenters with excellent enantioselectivities (up to 99% ee).

Neutral and Cationic Molybdenum Imido Alkylidene Cyclic Alkyl Amino Carbene (CAAC) Complexes for Olefin Metathesis

The first neutral and cationic Mo imido alkylidene cyclic alkyl amino carbene (CAAC) complexes of the general formulae [Mo(N-Ar)(CHCMe2 Ph)(X)2 (CAAC)] and [Mo(N-Ar)(CHCMe2 Ph)(X)(CAAC)][B(ArF )4 ] (X=Br, Cl, OTf, OC6 F5 ; CAAC=1-(2,6-iPr2 -C6 H3 )-3,3,5,5-tetramethyltetrahydropyrrol-2-ylidene) have been synthesized from molybdenum imido bishalide alkylidene DME precursors. Different combinations of the imido and "X" ligands have been employed to understand synthetic peculiarities. Selected complexes have been characterized by single-crystal X-ray analysis. Due to the pronounced σ-donor/π-acceptor characteristics of CAACs, the corresponding neutral and cationic molybdenum imido alkylidene CAAC complexes do not require the presence of stabilizing donor ligands such as nitriles. Calculations on the PBE0-D3BJ/def2-TZVP level for PBE0-D3BJ/def2-SVP optimized geometries revealed partial charges at molybdenum similar to the corresponding molybdenum imido alkylidene N-heterocyclic carbene (NHC) complexes with a slightly higher polarization of the molybdenum alkylidene bond in the CAAC complexes. All cationic complexes have been tested in olefin metathesis reactions and showed improved activity compared to the analogous NHC complexes for hydrocarbon-based substrates, allowing for turnover numbers (TONs) up to 9500 even at room temperature. Some Mo imido alkylidene CAAC complexes are tolerant towards functional groups like thioethers and sulfonamides.

Computational Elucidation on the Conformational Control of Selectivity in Intramolecular Ring-Closing Metathesis vs Intermolecular Homometathesis

The ring-closing metathesis reaction of diene plays an important role in the construction of cyclic compounds. In this research, density functional theory (DFT) calculations were conducted to elucidate the mechanisms and origins of the selectivity of ring-closing metathesis and homometathesis. The computational results suggest that the selectivity is determined by the substrate conformation. For the ester-tethered substrate, the homometathesis is more favorable, due to the planar structure of ester facilitating the conjugative effect of the formed E-homometathesis product. For the amide-tethered substrate, the ring-closing metathesis product is the only observed product because the steric hindrance of N-substituents disfavors homometathesis.

cis-Selective Acyclic Diene Metathesis Polymerization of ,-Dienes

The cis/trans stereochemistry of repeating alkenes in polymers provides a powerful handle to modulate the thermal and mechanical properties of these soft materials, but synthetic methods to precisely dictate this parameter remain scarce. We report herein a cis-selective acyclic diene metathesis (ADMET) polymerization of readily available α,ω-diene monomers with high functional group tolerance. Identification of a highly stereoselective cyclometalated Ru catalyst allowed the synthesis of a broad array of polymers with cis contents up to 99%. This platform was leveraged to study the impact of the cis geometry on the thermal and mechanical properties of polyalkenamers, including an ABA triblock copolymer synthesized via extension of a cis-rich telechelic polyoctenamer with d,l-lactide. These results suggest that cis-selective ADMET affords an efficient strategy to tune the properties of a variety of polymers.

Dependence of Transition-Metal Telluride Phases on Metal Precursor Reactivity and Mechanistic Implications

Modern bottom-up synthesis to nanocrystalline solid-state materials often lacks the reasoned product control that molecular chemistry boasts from having over a century of research and development. In this study, six transition metals including iron, cobalt, nickel, ruthenium, palladium, and platinum were reacted with the mild reagent didodecyl ditelluride in their acetylacetonate, chloride, bromide, iodide, and triflate salts. This systematic analysis demonstrates how rationally matching the reactivity of metal salts to the telluride precursor is necessary for the successful production of metal tellurides. The trends in reactivity suggest that radical stability is the better predictor of metal salt reactivity than hard-soft acid-base theory. Of the six transition-metal tellurides, the first colloidal syntheses of iron and ruthenium tellurides (FeTe₂ and RuTe₂) are reported.

Fast Initiating Furan-Containing Hoveyda-Type Complexes: Synthesis and Applications in Metathesis Reactions

Two new ruthenium complexes with chelating-ether benzylidene ligands bearing a furan moiety were synthesized and characterized, including X-ray crystallography. They initiated fast, also at 0 °C, and were found to be highly active in a variety of ring-closing, ene-yne, and cross-metathesis reactions, including an active pharmaceutical ingredient (API) model, which makes them good candidates for the transformation of complex polyfunctional compounds that require mild reaction conditions.

Copper-catalyzed Z-selective synthesis of acrylamides and polyacrylamides via alkylidene ketenimines

It remains very important to discover and study new fundamental intermediates consisting of carbon and nitrogen as the abundant elements of organic molecules. The unique alkylidene ketenimine could be formed in situ under mild conditions by an unexpected copper-catalyzed three-component reaction of alkyne, azide and water involving a successive cycloaddition, N₂ extrusion and carbene-assisted rearrangement. Only Z-α,β-unsaturated amides instead of E-α,β-unsaturated amides or triazoles were acquired from alkylidene ketenimines with excellent selectivities and stereospecificities. In addition, a series of “approximate” alternating copolymers (poly (triazole-alt-Z-acrylamides)) with high M_ns and yields were efficiently afforded by multicomponent polymerization through a very simple operation basing on this multicomponent reaction.

Alkylidene ketenimines are rarely reported, but synthetically useful, reactive intermediates. Here, the authors disclose a three-component reaction of alkyne, azide and water by cycloaddition, nitrogen extrusion, and carbene-assisted rearrangement, via in situ formation of alkylidene ketenimine.

Catalysis-Enabled Concise and Stereoselective Total Synthesis of the Tricyclic Prostaglandin D2 Metabolite Methyl Ester

A concise and stereoselective total synthesis of the clinically relevant tricyclic prostaglandin D2 metabolite (tricyclic-PGDM) methyl ester in racemic form was accomplished in eight steps from a readily available known cyclopentene-diol derivative. The synthesis features a nickel-catalyzed Ueno-Stork-type dicarbofunctionalization to generate two consecutive stereocenters, a palladium-catalyzed carbonylative spirolactonization to build the core oxaspirolactone, and a Z-selective cross-metathesis to introduce the (Z)-3-butenoate side chain, a group challenging to introduce through traditional Wittig protocols and troublesome for the two previous total syntheses. A general Z-selective cross-metathesis protocol to construct (Z)-β,γ-unsaturated esters was also developed that has broad functional group tolerance and high stereoselectivity. Additionally, our synthesis already accumulated 75 mg of valuable material for an 18 O-tricyclic-PGDM-based assay used in clinical settings for inflammation.

Merging Grubbs second-generation catalyst with photocatalysis enables Z-selective metathesis of olefins: scope, limitations, and mechanism

Olefin cross-metathesis is a cornerstone reaction in organic synthesis where stereoselectivity is typically governed by the structure of the catalyst. In this work, we show that merging Grubbs second generation catalyst, a classical E-selective catalyst, with a readily available photocatalyst, enables the exclusive formation of the contra-thermodynamic Z-isomer. The scope and limitations of this unprecedented approach are discussed based on both computational and experimental mechanistic data.

Light is magic! The combination of Grubbs second generation catalyst, a well-known catalyst for E-selective olefin metathesis, with a photosensitizer enables efficient access to the contra-thermodynamic Z-isomers.

Bulky Cyclometalated Ruthenium Nitrates for Challenging Z-Selective Metathesis: Efficient One-Step Access to α-Oxygenated Z-Olefins from Acrylates and Allyl Alcohols

α-Oxygenated Z-olefins are ubiquitous in biologically active molecules and serve as versatile handles for organic synthesis, but their syntheses are often tedious and less selective. Here we report the efficient Z-selective metathesis of various terminal acrylates and allyl alcohols, which enables facile and selective construction of high value-added α-oxygenated Z-olefins from readily available feedstock chemicals. These challenging metathesis transformations are enabled by novel cyclometalated Ru-carbene-nitrate complexes bearing bulky-yet-flexible side arms, whose assembly was unlocked by new organometallic syntheses.

Iridium(III) Catalyzed Z-Selective Allylic Arylation of α-Fluoro But-1-enoic Acid Amides via β-F-Elimination in Water

Allylic arylation of α-fluoro but-1-enoic acid amides with arylboronic acids was carried out in water by comparing the catalytic activity of iridium(III) and rhodium(III). Ir(III) has shown a strong superiority over Rh(III) to give allyl-aryl coupling products with excellent stereoselectivity in favor of the Z-isomer. The origin of high stereoselectivity is perhaps because of the a coordination of iridium Ir-N or Ir-O.

Comparison of the Spectroscopically Measured Catalyst Transformation and Electrochemical Properties of Grubbs' First- and Second-Generation Catalysts

According to UV-vis spectroscopy (0.10 mM, CH₂Cl₂ at 25 °C), the catalyst transformation (which could possibly include ligand dissociation with active catalyst formation, dimer formation, and decomposition) rate constants (k _obs) of Grubbs' first (1) and second (2) generation catalysts are 7.48 × 10^-5 and 1.52 × 10^-4 s^-1, respectively. From ³¹P NMR (0.1 M, CD₂Cl₂, at 25 °C), the catalyst transformation was 5.1% for 1 and 16.5% for 2 after 72 h. However, due to the larger concentrations of the NMR samples compared to the UV-vis samples, the extent of transformation did not correspond. The oxidation potential of the Ru^II/Ru^III couple of 2 (E°' = 27.5 mV at v = 200 mV s^-1) was considerably lower than that of 1 (E°' = 167 mV at v = 200 mV s^-1). In the case of 1, a second reduction peak appeared at slow scan rates. This may probably be ascribed to an electrochemically active compound that was formed from the intermediate cation 1 ^•+ and the subsequent reduction of the latter. The oxidation/reduction of 1 proceeds according to an E_rC_i electrochemical mechanism (E_r = electrochemically reversible step, C_i = chemically irreversible step), whereas 2 proceeds according to an E_rC_r electrochemical mechanism (E_r = electrochemically reversible step, C_i = chemically reversible step).

Ultrasound-assisted synthesis of pyrimidines and their fused derivatives: A review

The pyrimidine scaffold is present in many bioactive drugs; therefore, efficient synthetic routes that provide shorter reaction times, higher yields, and site-selective reactions are constantly being sought. Ultrasound (US) irradiation has emerged as an alternative energy source in the synthesis of these heterocyclic scaffolds, and over the last ten years there has been a significant increase in the number of publications mentioning US in either the construction or derivatization of the pyrimidine core. This review presents a detailed summary (with 140 references) of the effects of US (synergic or not) on the construction and derivatization of the pyrimidine core through classical reactions (e.g., multicomponent, cyclocondensation, cycloaddition, and alkylation reactions). The main points that were taken into consideration are as follows: chemo- and regioselectivity issues, and the results of conventional heating methods compared to US and mechanistic insights that are also presented and discussed for key reactions.

Computational Discovery of Transition-metal Complexes: From High-throughput Screening to Machine Learning

Transition-metal complexes are attractive targets for the design of catalysts and functional materials. The behavior of the metal-organic bond, while very tunable for achieving target properties, is challenging to predict and necessitates searching a wide and complex space to identify needles in haystacks for target applications. This review will focus on the techniques that make high-throughput search of transition-metal chemical space feasible for the discovery of complexes with desirable properties. The review will cover the development, promise, and limitations of "traditional" computational chemistry (i.e., force field, semiempirical, and density functional theory methods) as it pertains to data generation for inorganic molecular discovery. The review will also discuss the opportunities and limitations in leveraging experimental data sources. We will focus on how advances in statistical modeling, artificial intelligence, multiobjective optimization, and automation accelerate discovery of lead compounds and design rules. The overall objective of this review is to showcase how bringing together advances from diverse areas of computational chemistry and computer science have enabled the rapid uncovering of structure-property relationships in transition-metal chemistry. We aim to highlight how unique considerations in motifs of metal-organic bonding (e.g., variable spin and oxidation state, and bonding strength/nature) set them and their discovery apart from more commonly considered organic molecules. We will also highlight how uncertainty and relative data scarcity in transition-metal chemistry motivate specific developments in machine learning representations, model training, and in computational chemistry. Finally, we will conclude with an outlook of areas of opportunity for the accelerated discovery of transition-metal complexes.

Toward E-selective Olefin Metathesis: Computational Design and Experimental Realization of Ruthenium Thio-Indolate Catalysts

The selective transformation of 1-alkenes into E-olefins is a long-standing challenge in olefin metathesis. Density functional theory (DFT) calculations predict high E-selectivity for catalysts incorporating a bidentate, dianionic thio-indolate ligand within a RuXX’(NHC)(py)(= CHR) platform (NHC = N-heterocyclic carbene; py = pyridine). Such complexes are predicted to yield E-olefins by favoring anti-disposed substituents in the transition state expected to be rate-determining: specifically, that for cycloreversion of the metallacyclobutane intermediate. Three pyridine-stabilized catalysts Ru21a-c were synthesized, in which the thio-indolate ligand bears a H, Me, or Ph substituent at the C2 position, and the NHC ligand is the unsaturated imidazoline-2-ylidene Me2IMes (which bears N-mesityl groups and methyl groups on the C4,5 backbone). Single-crystal X-ray diffraction analysis of Ru21c confirms the ligand orientation required for E-selective metathesis, with the thio-indolate sulfur atom binding cis to the NHC, and the indolate nitrogen atom trans to the NHC. However, whereas the new complexes mediated metathetic exchange of their 2-thienylmethylidene ligand in the presence of the common metathesis substrates styrene and allylbenzene, no corresponding self-metathesis products were obtained. Only small amounts of 2-butene (73% (Z)-2-butene) were obtained in self-metathesis of propene using Ru21a. Detailed DFT analysis of this process revealed that product release is surprisingly slow, limiting the reaction rate and explaining the low metathesis activity. With the barrier to dissociation of (Z)-2-butene being lower than that of (E)-2-butene, the calculations also account for the observed Z-selectivity of Ru21a. These findings provide guidelines for catalyst redesign in pursuit of the ambitious goal of E-selective 1-alkene metathesis.

Graphic abstract

Continuous Flow Z-Stereoselective Olefin Metathesis: Development and Applications in the Synthesis of Pheromones and Macrocyclic Odorant Molecules*

The first continuous flow Z-selective olefin metathesis process is reported. Key to realizing this process was the adequate choice of stereoselective catalysts combined with the design of an appropriate continuous reactor setup. The designed continuous process permits various self-, cross- and macro-ring-closing-metathesis reactions, delivering products in high selectivity and short residence times. This technique is exemplified by direct application to the preparation of a range of pheromones and macrocyclic odorant molecules and culminates in a telescoped Z-selective cross-metathesis/ Dieckmann cyclisation sequence to access (Z)-Civetone, incorporating a serial array of continually stirred tank reactors.

Synthesis of medicinally relevant oxalylamines via copper/Lewis acid synergistic catalysis

Allylamines have long been recognized as valuable synthons because of their excellent reactivity in organic synthesis. Here, an efficient amination reaction of allenyl ethers via copper/Lewis acid synergistic catalysis has been established, providing straightforward access to diverse functionalized Z-oxalylamines and E -halogenated oxalylamines in good to excellent yields with high regio- and stereoselectivities. The developed method tolerates more than 100 examples that include late-stage functionalization of bioactive molecules, and features gram-scale synthesis of oxalylamines with high turnover number (TON > 1000) under mild and simple conditions. The applicability of the protocol is further demonstrated with the construction of drug molecules.

Ruthenium Complexes Featuring Unsymmetrical N-Heterocyclic Carbene Ligands-Useful Olefin Metathesis Catalysts for Special Tasks

This review describes a distinct class of ruthenium olefin metathesis catalysts featuring unsymmetrical N-heterocyclic carbene (uNHC) ligands, from its historical beginning to the present state of the art. Thanks to advantageous traits, such as pronounced thermodynamic stability, chemical latency, outstanding selectivity, and compatibility with green solvents, these catalysts led to good results in a number of specialized metathesis transformations. Therefore, while being a niche, the uNHC complexes can potentially be implemented in a number of industrial processes, such as valorization of Fischer-Tropsch olefin fractions, ethenolysis of renewable products, and modern pharmaceutical production.

Stereoretentive Olefin Metathesis: A New Avenue for the Synthesis of All-cis Poly(p-phenylene vinylene)s and Stereo­defined Polyalkenamers

Olefin metathesis has tremendously impacted all fields of synthetic chemistry. However, the control of the olefin stereochemistry during this process remains a grand challenge. Recent innovations in catalyst design have permitted control of the stereochemistry of the olefin product. Here, we discuss the development of stereoretentive olefin metathesis, with an emphasis on the synthesis of stereodefined polyalkenamers through ring-opening metathesis polymerization (ROMP). We then present our application of this unique reaction manifold to the preparation of all-cis poly(p-phenylene vinylene)s (PPVs). A dithiolate Ru catalyst was found to deliver perfect cis selectivity for the polymerization of a paracyclophane diene monomer. By using optimized conditions, all-cis PPVs with narrow dispersities and predictable molar masses were obtained by varying the ratio of monomer to catalyst. The high chain fidelity of the stereoretentive ROMP with a paracyclophane diene monomer enabled the preparation of well-defined diblock copolymers with a norbornene co-monomer. Photochemical isomerization of all-cis to all-trans PPVs was effected with both homopolymers and diblock copolymers. This process was shown to be selective for the PPV block, and resulted in changes in optical properties, polymer size, and solubility. Stereoretentive ROMP provides a promising platform for synthesizing polymers with unique properties, including photoresponsive all-cis PPVs with living characteristics.

1 Introduction

2 Synthetic Applications of Stereoretentive Olefin Metathesis

3 Stereocontrol of Polyalkenamers through Stereoretentive ROMP

4 Stereoretentive ROMP To Access All-cis Poly(p-phenylene vinylene)s

5 Conclusion