Structurally Characterized μ-1,2-Peroxo/Superoxo Dicopper(II) Pair

Coordination Variations within Binuclear Copper Dioxygen-Derived (Hydro)Peroxo and Superoxo Species; Influences upon Thermodynamic and Electronic Properties

Copper ion is a versatile and ubiquitous facilitator of redox chemical and biochemical processes. These include the binding of molecular oxygen to copper(I) complexes where it undergoes stepwise reduction-protonation. A detailed understanding of thermodynamic relationships between such reduced/protonated states is key to elucidate the fundamentals of the chemical/biochemical processes involved. The dicopper(I) complex [CuI2(BPMPO-)]1+ {BPMPOH = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} undergoes cryogenic dioxygen addition; further manipulations in 2-methyltetrahydrofuran generate dicopper(II) peroxo [CuII2(BPMPO-)(O22-)]1+, hydroperoxo [CuII2(BPMPO-)(-OOH)]2+, and superoxo [CuII2(BPMPO-)(O2•-)]2+ species, characterized by UV-vis, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies, and cold spray ionization mass spectrometry. An unexpected EPR spectrum for [CuII2(BPMPO-)(O2•-)]2+ is explained by the analysis of its exchange-coupled three-spin frustrated system and DFT calculations. A redox equilibrium, [CuII2(BPMPO-)(O22-)]1+ ⇄ [CuII2(BPMPO-)(O2•-)]2+, is established utilizing Me8Fc+/Cr(η6-C6H6)2, allowing for [CuII2(BPMPO-)(O2•-)]2+/[CuII2(BPMPO-)(O22-)]1+ reduction potential calculation, E°' = -0.44 ± 0.01 V vs Fc+/0, also confirmed by cryoelectrochemical measurements (E°' = -0.40 ± 0.01 V). 2,6-Lutidinium triflate addition to [CuII2(BPMPO-)(O22-)]1+ produces [CuII2(BPMPO-)(-OOH)]2+; using a phosphazene base, an acid-base equilibrium was achieved, pKa = 22.3 ± 0.7 for [CuII2(BPMPO-)(-OOH)]2+. The BDFEOO-H = 80.3 ± 1.2 kcal/mol, as calculated for [CuII2(BPMPO-)(-OOH)]2+; this is further substantiated by H atom abstraction from O-H substrates by [CuII2(BPMPO-)(O2•-)]2+ forming [CuII2(BPMPO-)(-OOH)]2+. In comparison to known analogues, the thermodynamic and spectroscopic properties of [CuII2(BPMPO-)] O2-derived adducts can be accounted for based on chelate ring size variations built into the BPMPO- framework and the resulting enhanced CuII-ion Lewis acidity.

Jellyfish-type Dinuclear Hafnium Azido Complexes: Synthesis and Reactivity

Di- and multinuclear hafnium complexes bridged by ligands have been rarely reported. In this article, a novel 3,5-disubstituted pyrazolate-bridged ligand LH5 with two [N2 N]2- -type chelating side arms was designed and synthesized, which supported a series of dinuclear hafnium complexes. Dinuclear hafnium azides [LHf2 (μ-1,1-N3 )2 (N3 )2 ][Na(THF)4 ] 3 and [LHf2 (μ-1,1-N3 )2 (N3 )2 ][Na(2,2,2-Kryptofix)] 4 were further synthesized and structurally characterized, featuring two sets of terminal and bridging azido ligands like jellyfishes. The reactivity of 3 under reduction conditions was conducted, leading to a formation of a tetranuclear hafnium imido complex [L1 Hf2 (μ1 -NH)(N3 ){μ2 -K}]2 5. DFT calculations revealed that the mixed imido azide 5 was generated via an intramolecular C-H insertion from a putative dinuclear HfIV -nitridyl intermediate.

Evidence of Sulfur Non-Innocence in [CoII (dithiacyclam)]2+ -Mediated Catalytic Oxygen Reduction Reactions

In many metalloenzymes, sulfur-containing ligands participate in catalytic processes, mainly via the involvement in electron transfer reactions. In a biomimetic approach, we now demonstrate the implication of S-ligation in cobalt mediated oxygen reduction reactions (ORR). A comparative study between the catalytic ORR capabilities of the four-nitrogen bound [Co(cyclam)]²⁺ (1; cyclam=1,5,8,11-tetraaza-cyclotetradecane) and the S-containing analog [Co(S₂ N₂ -cyclam)]²⁺ (2; S₂ N₂ -cyclam=1,8-dithia-5,11-diaza-cyclotetradecane) reveals improved catalytic performance once the chalcogen is introduced in the Co coordination sphere. Trapping and characterization of the intermediates formed upon dioxygen activation at the Co^II centers in 1 and 2 point to the involvement of sulfur in the O₂ reduction process as the key for the improved catalytic ORR capabilities of 2.

Oxygen-Enhanced Atom Transfer Radical Polymerization through the Formation of a Copper Superoxido Complex

In controlled radical polymerization, oxygen is typically regarded as an undesirable component resulting in terminated polymer chains, deactivated catalysts, and subsequent cessation of the polymerization. Here, we report an unusual atom transfer radical polymerization whereby oxygen favors the polymerization by triggering the in situ transformation of CuBr/L to reactive superoxido species at room temperature. Through a superoxido ARGET-ATRP mechanism, an order of magnitude faster polymerization rate and a rapid and complete initiator consumption can be achieved as opposed to when unoxidized CuBr/L was instead employed. Very high end-group fidelity has been demonstrated by mass-spectrometry and one-pot synthesis of block and multiblock copolymers while pushing the reactions to reach near-quantitative conversions in all steps. A high molecular weight polymer could also be targeted (DP_n = 6400) without compromising the control over the molar mass distributions (Đ < 1.20), even at an extremely low copper concentration (4.5 ppm). The versatility of the technique was demonstrated by the polymerization of various monomers in a controlled fashion. Notably, the efficiency of our methodology is unaffected by the purity of the starting CuBr, and even a brown highly-oxidized 15-year-old CuBr reagent enabled a rapid and controlled polymerization with a final dispersity of 1.07, thus not only reducing associated costs but also omitting the need for rigorous catalyst purification prior to polymerization.

A De Novo-Designed Type 3 Copper Protein Tunes Catechol Substrate Recognition and Reactivity

De novo metalloprotein design is a remarkable approach to shape protein scaffolds toward specific functions. Here, we report the design and characterization of Due Rame 1 (DR1), a de novo designed protein housing a di-copper site and mimicking the Type 3 (T3) copper-containing polyphenol oxidases (PPOs). To achieve this goal, we hierarchically designed the first and the second di-metal coordination spheres to engineer the di-copper site into a simple four-helix bundle scaffold. Spectroscopic, thermodynamic, and functional characterization revealed that DR1 recapitulates the T3 copper site, supporting different copper redox states, and being active in the O₂ -dependent oxidation of catechols to o-quinones. Careful design of the residues lining the substrate access site endows DR1 with substrate recognition, as revealed by Hammet analysis and computational studies on substituted catechols. This study represents a premier example in the construction of a functional T3 copper site into a designed four-helix bundle protein.

Antisymmetric Spin Exchange in a μ-1,2-Peroxodicopper(II) Complex with an Orthogonal Cu-O-O-Cu Arrangement and S = 1 Spin Ground State Characterized by THz-EPR

A unique type of Cu₂/O₂ adduct with orthogonal (close to 90°) Cu-O-O-Cu arrangement has been proposed for initial stages of O₂ binding at biological type III dicopper sites, and targeted ligand design has now allowed us to emulate such an adduct in a pyrazolate-based μ-η¹ :η¹-peroxodicopper(II) complex (2) with Cu-O-O-Cu torsion φ of 87°, coined ^⊥ P intermediate. Full characterization of 2, including X-ray diffraction (d _O-O = 1.452 Å) and Raman spectroscopy (ν̃_O-O = 807 cm^-1), completes a series of closely related Cu₂/O₂ intermediates featuring μ-η¹ :η¹-peroxodicopper(II) cores with φ ranging from 55° (A, cis-peroxo ^C P; Brinkmeier A.et al., J. Am. Chem. Soc.2021, 143, 10361) via 87° (2, ^⊥ P type) up to 104° (B, approaching trans-peroxo ^T P; Kindermann N.et al., Angew. Chem., Int. Ed.2015, 54, 1738). SQUID magnetometry revealed ferromagnetic interaction of the Cu^II ions and a triplet (S _t = 1) ground state in 2. Frequency-domain THz-EPR has been employed to quantitatively investigate the spin systems of 2 and B. Magnetic transitions within the triplet ground states confirmed their substantial zero-field splittings (ZFS) suggested by magnetometry. Formally forbidden triplet-to-singlet transitions at 56 (2) and 157 cm^-1 (B), which are in agreement with the exchange coupling strengths J _iso inferred from SQUID data, are reported for the first time for coupled dicopper(II) complexes. Rigorous analysis by spin-Hamiltonian-based simulations attributed the corresponding nonzero transition probabilities and the ZFS to substantial antisymmetric (Dzyaloshinskii-Moriya) exchange d and provided robust values and orientations for the d , J , and g tensors. These interactions can be correlated with the Cu-O-O-Cu geometries, revealing a linear increase of J _iso with the Cu-O-O-Cu torsion and a strong linear decrease with the Cu-O-O angle. Relevance of the ^⊥ P intermediate for O₂ activation at type III dicopper sites and a potential role of antisymmetric exchange in the concomitant intersystem crossing are proposed.

Combining metal-metal cooperativity, metal-ligand cooperativity and chemical non-innocence in diiron carbonyl complexes

Several metalloenzymes, including [FeFe]-hydrogenase, employ cofactors wherein multiple metal atoms work together with surrounding ligands that mediate heterolytic and concerted proton-electron transfer (CPET) bond activation steps. Herein, we report a new dinucleating PNNP expanded pincer ligand, which can bind two low-valent iron atoms in close proximity to enable metal-metal cooperativity (MMC). In addition, reversible partial dearomatization of the ligand's naphthyridine core enables both heterolytic metal-ligand cooperativity (MLC) and chemical non-innocence through CPET steps. Thermochemical and computational studies show how a change in ligand binding mode can lower the bond dissociation free energy of ligand C(sp3)-H bonds by ∼25 kcal mol-1. H-atom abstraction enabled trapping of an unstable intermediate, which undergoes facile loss of two carbonyl ligands to form an unusual paramagnetic (S = ) complex containing a mixed-valent iron(0)-iron(i) core bound within a partially dearomatized PNNP ligand. Finally, cyclic voltammetry experiments showed that these diiron complexes show catalytic activity for the electrochemical hydrogen evolution reaction. This work presents the first example of a ligand system that enables MMC, heterolytic MLC and chemical non-innocence, thereby providing important insights and opportunities for the development of bimetallic systems that exploit these features to enable new (catalytic) reactivity.

Repurposing a peptide antibiotic as a catalyst: a multicopper–daptomycin complex as a cooperative O–O bond formation and activation catalyst

A peptide antibiotic, daptomycin, was repurposed to a multicopper catalyst presenting cooperative rate enhancement in O–O bond formation and activation reactions.

Modulation of a μ-1,2-Peroxo Dicopper(II) Intermediate by Strong Interaction with Alkali Metal Ions

The properties of metal/dioxygen species, which are key intermediates in oxidation catalysis, can be modulated by interaction with redox-inactive Lewis acids, but structural information about these adducts is scarce. Here we demonstrate that even mildly Lewis acidic alkali metal ions, which are typically viewed as innocent "spectators", bind strongly to a reactive cis-peroxo dicopper(II) intermediate. Unprecedented structural insight has now been obtained from X-ray crystallographic characterization of the "bare" Cu^II₂(μ-η¹:η¹-O₂) motif and its Li⁺, Na⁺, and K⁺ complexes. UV-vis, Raman, and electrochemical studies show that the binding persists in MeCN solution, growing stronger in proportion to the cation's Lewis acidity. The affinity for Li⁺ is surprisingly high (∼70 × 10⁴ M^-1), leading to Li⁺ extraction from its crown ether complex. Computational analysis indicates that the alkali ions influence the entire Cu-OO-Cu core, modulating the degree of charge transfer from copper to dioxygen. This induces significant changes in the electronic, magnetic, and electrochemical signatures of the Cu₂O₂ species. These findings have far-reaching implications for analyses of transient metal/dioxygen intermediates, which are often studied in situ, and they may be relevant to many (bio)chemical oxidation processes when considering the widespread presence of alkali cations in synthetic and natural environments.