Alkali Metal Adducts of an Iron(0) Complex and Their Synergistic FLP-Type Activation of Aliphatic C-X Bonds

Stoichiometry Dependence in the Consecutive, Competing Reduction, Halogenation, or Deoxygenation of Aryl Carbonyls

Six fundamental chemical transformations of aryl carbonyls are achieved by properly adjusting the stoichiometry of the borane-amine and titanium tetrachloride reagent system. This set of reagents acts collectively as a hydride donor, Lewis acid catalyst, and halogen source for the reduction of carbonyls to alcohols, reductive halogenation of carbonyls to halides, deoxygenation of carbonyls to alkanes, dehydroxyhalogenation of alcohols to halides, deoxygenation of alcohols to alkanes, and hydrodehalogenation of halides to alkanes. While the carbonyl reduction is broadly applicable to both aromatic and aliphatic substrates, the remaining reactions are dependent on the stability of the proposed carbocationic intermediates, enabling highly selective reactions at the substrates' benzylic position. This unique selectivity allows benzylic dehalogenation in the presence of aryl and alkyl halides in addition to highly selective dehydroxyhalogenation of alcohols even for tertiary versus secondary aliphatic and secondary versus primary benzylic substrates using only titanium tetrachloride as the chlorinating agent.

Evidence for a kinetic FLP reaction pathway in the activation of benzyl chlorides by alkali metal-phosphine pairs

Kinetic frustrated Lewis pairs (FLP) allow facile cleavage of a number of E-H bonds (E = H, Si, C, B) where both the Lewis base and Lewis acid are involved in the bond activation transition state. More recently, kinetic FLP systems have been extended to the cleavage of C-X (X = F, Cl, Br) bonds. We report on the role of sodium tetrakis(pentafluorophenyl)borate in the benzylation of triarylphosphines, where the sodium cation and phosphine support a kinetic FLP type transition state.

Aluminum in Frustrated Lewis Pair Chemistry

This review article describes the development of the use of aluminum compounds in the chemistry of frustrated Lewis pairs (FLPs) over the last 14 years. It also discusses the synthesis, reactivity and catalytic applications of intermolecular, intramolecular and so-called hidden FLPs with phosphorus, nitrogen and carbon Lewis bases. The intrinsically higher acidity of aluminum compounds compared to their boron analogs opens up different reaction pathways. The results are presented in a more or less chronological order. It is shown that Al FLPs react with a variety of polar and non-polar substrates and form both stable adducts and reversibly activate bonds. Consequently, some catalytic applications of the title compounds were presented such as dimerization of alkynes, hydrogenation of tert-butyl ethylene and imines, C-F bond activation, reduction of CO2, dehydrogenation of amine borane and transfer of ammonia. In addition, various Al FLPs were used as initiators in polymerization reactions.

A review of frustrated Lewis pair enabled monoselective C-F bond activation

Frustrated Lewis pair (FLP) bond activation chemistry has greatly developed over the last two decades since the seminal report of metal-free reversible hydrogen activation. Recently, FLP systems have been utilized to allow monoselective C-F bond activation (at equivalent sites) in polyfluoroalkanes. The problem of 'over-defluorination' in the functionalization of polyfluoroalkanes (where multiple fluoro-positions are uncontrollably functionalized) has been a long-standing chemical problem in fluorocarbon chemistry for over 80 years. FLP mediated monoselective C-F bond activation is complementary to other solutions developed to address 'over-defluorination' and offers several advantages and unique opportunities. This perspective highlights some of these advantages and opportunities and places the development of FLP mediated C-F bond activation into the context of the wider effort to overcome 'over-defluorination'.

Reversible Modulation of the Electronic and Spatial Environment around Ni(0) Centers Bearing Multifunctional Carbene Ligands with Triarylaluminum

Designing and modulating the electronic and spatial environments surrounding metal centers is a crucial issue in a wide range of chemistry fields that use organometallic compounds. Herein, we demonstrate a Lewis-acid-mediated reversible expansion, contraction, and transformation of the spatial environment surrounding nickel(0) centers that bear N-phosphine oxide-substituted N-heterocyclic carbenes (henceforth referred to as (S)PoxIms). Reaction between tetrahedral (syn-κ-C,O-(S)PoxIm)Ni(CO)₂ and Al(C₆F₅)₃ smoothly afforded heterobimetallic Ni/Al species such as trigonal-planar {κ-C-Ni(CO)₂}(μ-anti-(S)PoxIm){κ-O-Al(C₆F₅)₃} via a complexation-induced rotation of the N-phosphine oxide moieties, while the addition of 4-dimethylaminopyridine resulted in the quantitative regeneration of the former Ni complexes. The corresponding interconversion also occurred between (SPoxIm)Ni(η²:η²-diphenyldivinylsilane) and {κ-C-Ni(η²:η²-diene)}(μ-anti-SPoxIm){κ-O-Al(C₆F₅)₃} via the coordination and dissociation of Al(C₆F₅)₃. The shape and size of the space around the Ni(0) center was drastically changed through this Lewis-acid-mediated interconversion. Moreover, the multinuclear NMR, IR, and XAS analyses of the aforementioned carbonyl complexes clarified the details of the changes in the electronic states on the Ni centers; i.e., the electron delocalization was effectively enhanced among the Ni atom and CO ligands in the heterobimetallic Ni/Al species. The results presented in this work thus provide a strategy for reversibly modulating both the electronic and spatial environment of organometallic complexes, in addition to the well-accepted Lewis-base-mediated ligand-substitution methods.

Insights into the Mechanism of Aluminum-Catalyzed Halodefluorination

Aluminum has been reported to catalyze halodefluorination reactions, where aliphatic fluorine is substituted with a heavier halogen. Although it is known that stoichiometric aluminum halide can perform this reaction, the role of catalytic aluminum halide and organyl alane reagents is not well understood. We investigate the mechanism of the halodefluorination reaction using catalytic aluminum halide and stoichiometric trimethylsilyl halide. We explore the use of B(C₆F₅)₃ as a catalyst to benchmark pathways where aluminum acts either as a Lewis acid catalyst in cooperation with trimethylsilyl halide or as an independent halodefluorination reagent which is subsequently regenerated by trimethylsilyl halide. Computational and experimental results indicate that aluminum acts as an independent halodefluorination reagent and that reactivity trends observed between different halide reagents can be attributed to relative barriers in halide delivery to the organic fragment, which is the rate-limiting step in both the aluminum halide- and B(C₆F₅)₃-catalyzed pathways.

Experimental and computational insights into the mechanism of FLP mediated selective C-F bond activation

Frustrated Lewis pairs (FLP) comprising of B(C₆F₅)₃ (BCF) and 2,4,6-triphenylpyridine (TPPy), P(o-Tol)₃ or tetrahydrothiophene (THT) have been shown to mediate selective C-F activation in both geminal and chemically equivalent distal C-F sites. In comparison to other reported attempts of C-F activation using BCF, these reactions appear surprisingly facile. We investigate this reaction through a combination of experimental and computational chemistry to understand the mechanism of the initial C-F activation event and the origin of the selectivity that prevents subsequent C-F activation in the monoactivated salts. We find that C-F activation likely occurs via a Lewis acid assisted S_N1 type pathway as opposed to a concerted FLP pathway (although the use of an FLP is important to elevate the ground state energy), where BCF is sufficiently Lewis acidic to overcome the kinetic barrier for C-F activation in benzotrifluorides. The resultant intermediate salts of the form [ArCF₂(LB)][BF(C₆F₅)₃] (LB = Lewis base) are relatively thermodynamically unstable, and an equilibrium operates between the fluorocarbon/FLP and their activation products. As such, the use of a fluoride sequestering reagent such as Me₃SiNTf₂ is key to the realisation of the forward C-F activation reaction in benzotrifluorides. Selectivity in this reaction can be attributed to both the installation of bulky Lewis bases geminal to residual C-F sites and from electronic re-ordering of kinetic barriers (of C-F sites in products and starting materials) arising from the electron withdrawing nature of the pyridinium, phosphonium and sulfonium groups.

Investigating Oxidative Addition Mechanisms of Allylic Electrophiles with Low-Valent Ni/Co Catalysts Using Electroanalytical and Data Science Techniques

The catalysis by a π-allyl-Co/Ni complex has drawn significant attention recently due to its distinct reactivity in reductive Co/Ni-catalyzed allylation reactions. Despite significant success in reaction development, the critical oxidative addition mechanism to form the π-allyl-Co/Ni complex remains unclear. Herein, we present a study to investigate this process with four catalysis-relevant complexes: Co(^MeBPy)Br₂, Co(^MePhen)Br₂, Ni(^MeBPy)Br₂, and Ni(^MePhen)Br₂. Enabled by an electroanalytical platform, Co(I)/Ni(I) species were found responsible for the oxidative addition of allyl acetate. Kinetic features of different substrates were characterized through linear free-energy relationship (Hammett-type) studies, statistical modeling, and a DFT computational study. In this process, a coordination-ionization-type transition state was proposed, sharing a similar feature with Pd(0)-mediated oxidative addition in Tsuji-Trost reactions. Computational and ligand structural analysis studies support this mechanism, which should provide key information for next-generation catalyst development.

The crucial and multifaceted roles of main-group cations and their salts in iron-mediated cross-couplings

While a broad variety of iron-catalyzed cross-couplings involve the use of main-group organometallics R-[M] as nucleophiles, the role of the [M]ⁿ⁺ cation in the coupling process is generally disregarded. However, several beneficial effects of [M]ⁿ⁺ cations by themselves or involved in ionic salts used as additives have been observed in such procedures. At the molecular level, interaction of those [M]ⁿ⁺ cations with on-cycle organoiron intermediates can proceed in several ways. Intermolecular interactions can be observed, and also the implication of [M]ⁿ⁺ in the iron's first or second coordination sphere, e.g. by ambiphilic coordination of a [M]-X salt to an R-[Fe] bond. The use of [M]ⁿ⁺ cations in the reaction medium is also a powerful strategy enabling control of the distribution of iron oxidation states within the coupling process.

Gauging the donor strength of iron(0) complexes via their N-heterocyclic carbene gold(i) adducts

We isolate and characterize the gold(i)–iron(0) adducts [(iPr2-bimy)Au–Fe(CO)3(PMe3)2][BArF4] and [Au–{Fe(CO)3(PMe3)2}2][BArF4] (iPr2-bimy = 1,3-diisopropylbenzimidazolin-2-ylidene, BArF4 = tetrakis(pentafluorophenyl)borate).