A Rare-Earth Metal Retrospective to Stimulate All Fields

Reductive samarium (electro)catalysis enabled by SmIII-alkoxide protonolysis

Samarium diiodide (SmI2) is a privileged, single-electron reductant deployed in diverse synthetic settings. However, generalizable methods for catalytic turnover remain elusive because of the well-known challenge associated with cleaving strong SmIII-O bonds. Prior efforts have focused on the use of highly reactive oxophiles to enable catalyst turnover. However, such approaches give rise to complex catalyst speciation and intrinsically limit the synthetic scope. Herein, we leveraged a mild and selective protonolysis strategy to achieve samarium-catalyzed, intermolecular reductive cross-coupling of ketones and acrylates with broad scope. The modularity of our approach allows rational control of selectivity based on solvent, pKa (where Ka is the acid dissociation constant), and the samarium coordination sphere and provides a basis for future developments in catalytic and electrocatalytic lanthanide chemistry.

Activation and functionalisation of carbon dioxide by bis-tris(pyrazolyl)borate-supported divalent samarium and trivalent lanthanide silylamide complexes

Synthesis and reactivity with carbon dioxide (CO2) of divalent samarium in the bis-tris(pyrazolyl)borate ligand environment has been reported. In addition, CO2 activation and functionalisation by lanthanide silylamides in the bis-tris(pyrazolyl)borate ligand environment was demonstrated. Reduction of the Sm(III) precursor [Sm(Tp)2(OTf)] (Tp = hydrotris(1-pyrazolyl)borate; OTf = triflate) with KC8 yielded the insoluble Sm(II) multi-metallic coordination polymer [{Sm(Tp)2}n] 1-Sm. Addition of 1,2-dimethoxyethane (DME) to 1-Sm enabled isolation of the monomeric complex [Sm(Tp)2(DME)] 1-Sm(DME). Complex 1-Sm(DME) reduced CO2 to yield the oxalate-bridged dimeric Sm(III) complex [{Sm(Tp)2}2(μ-η2:η2-O2CCO2)] 2-Sm. The reactions of heteroleptic Ln(III) silylamide complexes [Ln(Tp)2(N'')] (Ln = Y, Sm; N'' = N(SiMe3)2) with CO2 yielded monomeric Ln(III) silyloxides [Ln(Tp)2(OSiMe3)] 3-Ln and trimethylsilyl isocyanate (OCNSiMe3). Complexes 3-Ln are the first crystallographically characterised examples of Ln(III)-OSiMe3 bonds accessed via CO2 activation and functionalisation. Full characterisation data are presented for all complexes, including solid-state molecular structure determination by single-crystal X-ray diffraction.

Uncovering the role of free lanthanum (La3+) ions and La oligomer on the surface of La (oxy)hydroxide particles for phosphate removal

La (oxy)hydroxide-based materials have been recognized as promising adsorbents for aqueous phosphate (P) removal. However, comprehending the adsorption behavior of P onto La (oxy)hydroxide particles remains challenging, given the heterogeneous low-crystalline surface encompassing La oligomers and free La3+ ions. In this study, a hydrogen (H) bond capping method was developed to construct La (oxy)hydroxide oligomers (LHOs) to simulate the low-crystalline La on the surface of La (oxy)hydroxide particles. The P uptake capacity was compared among free La3+ ions, LHOs, and La nanoparticle (La-NP) with maximum capacities of 1967.3 ± 30.8 mg/g, 461.1 ± 53.7 mg/g and 62.5 ± 6.0 mg/g, respectively. The FT-IR, Raman, in situ-XRD and XPS deconvolution analyses revealed that the removal of P by free La3+ ions mainly involve the process of chemical precipitation to form LaPO4·0.5H2O. Conversely, the elimination of P by LHOs is primarily attributed to inner-sphere complexation and hydroxyl exchange effect between LaOOH and P. Based on this study, the free La3+ ions and La oligomers on the surface of La (oxy)hydroxide particles play a primary role in P adsorption. These results also suggest that the successively decreased adsorption capacity of La (oxy)hydroxide-based adsorbents in the continuously adsorption/desorption cycles might be due to the irreversible inactivation and recrystallization of free La3+ ions and La oligomers on the surface.

Siloxide tripodal ligands as a scaffold for stabilizing lanthanides in the +4 oxidation state

Synthetic strategies to isolate molecular complexes of lanthanides, other than cerium, in the +4 oxidation state remain elusive, with only four complexes of Tb(iv) isolated so far. Herein, we present a new approach for the stabilization of Tb(iv) using a siloxide tripodal trianionic ligand, which allows the control of unwanted ligand rearrangements, while tuning the Ln(iii)/Ln(iv) redox-couple. The Ln(iii) complexes, [LnIII((OSiPh2Ar)3-arene)(THF)3] (1-LnPh) and [K(toluene){LnIII((OSiPh2Ar)3-arene)(OSiPh3)}] (2-LnPh) (Ln = Ce, Tb, Pr), of the (HOSiPh2Ar)3-arene ligand were prepared. The redox properties of these complexes were compared to those of the Ln(iii) analogue complexes, [LnIII((OSi(OtBu)2Ar)3-arene)(THF)] (1-LnOtBu) and [K(THF)6][LnIII((OSi(OtBu)2Ar)3-arene)(OSiPh3)] (2-LnOtBu) (Ln = Ce, Tb), of the less electron-donating siloxide trianionic ligand, (HOSi(OtBu)2Ar)3-arene. The cyclic voltammetry studies showed a cathodic shift in the oxidation potential for the cerium and terbium complexes of the more electron-donating phenyl substituted scaffold (1-LnPh) compared to those of the tert-butoxy (1-LnOtBu) ligand. Furthermore, the addition of the -OSiPh3 ligand further shifts the potential cathodically, making the Ln(iv) ion even more accessible. Notably, the Ce(iv) complexes, [CeIV((OSi(OtBu)2Ar)3-arene)(OSiPh3)] (3-CeOtBu) and [CeIV((OSiPh2Ar)3-arene)(OSiPh3)(THF)2] (3-CePh), were prepared by chemical oxidation of the Ce(iii) analogues. Chemical oxidation of the Tb(iii) and Pr(iii) complexes (2-LnPh) was also possible, in which the Tb(iv) complex, [TbIV((OSiPh2Ar)3-arene)(OSiPh3)(MeCN)2] (3-TbPh), was isolated and crystallographically characterized, yielding the first example of a Tb(iv) supported by a polydentate ligand. The versatility and robustness of these siloxide arene-anchored platforms will allow further development in the isolation of more oxidizing Ln(iv) ions, widening the breadth of high-valent Ln chemistry.

The Divalent Lanthanoid Triflates Ln(CF3SO3)2(CH3CN) (Ln=Sm, Eu): Structure, Luminescence, and Magnetism

The reaction of the trivalent lanthanoide triflates Ln(OTf)3 (Ln=Sm, Eu; OTf=CF3SO3 -) with the respective metals in acetonitrile leads to the Ln(II)-triflates Eu(OTf)2(CH3CN) (monoclinic, P21/n, Z=4, a=1053.54(1), b=610.28(5), c=1946.92(2) pm, β =98.611(4)) and Sm(OTf)2(CH3CN) (monoclinic, P21/n, Z=4, a=1054.41(4), b=612.16(2), c=1952.65(7) pm, β =98.524(2)). The isotypic strontium compound Sr(OTf)2(CH3CN) (monoclinic, P21/n, Z=4, a=1056.39(5), b=610.05(3), c=1950.1(1) pm, β =98.900(2)°) has been obtained from SrCO3 and triflic acid. The compounds have been investigated by X-ray diffraction, vibrational spectroscopy, luminescence spectroscopy, cyclic voltammetry, thermal analysis, and magnetic measurements.

4f/5d Hybridization Induced Single-Electron Delocalization in an Azide-Bridged Dicerium Complex

Dilanthanide complexes with one-electron delocalization are important targets for understanding the specific 4f/5d-bonding feature in lanthanide chemistry. Here, we report an isolable azide-bridged dicerium complex 3 [{(TrapenTMS)Ce}2(μ-N3)]• [Trapen = tris (2-aminobenzyl)amine; TMS = SiMe3], which is synthesized by the reaction of tripodal ligand-supported (TrapenTMS)CeIVCl complex 2 with NaN3. The structure and bonding nature of 3 are fully characterized by X-ray crystal diffraction analysis, electron paramagnetic resonance (EPR), magnetic measurement, cyclic voltammetry, X-ray absorption spectroscopy, and quantum-theoretical studies. Complex 3 presents a trans-bent central Ce-N3-Ce unit with a single electron of two mixed-valent Ce atoms. The unique low-temperature (2 K) anisotropic EPR signals [g = 1.135, 2.003, and 3.034] of 3 indicate that its spin density is distributed on the central Ce-N3-Ce unit with marked electron delocalization. Quantum chemical analyses show strong 4f/5d orbital mixing in the singly occupied molecular orbital of 3, which allows for the unpaired electron to extend throughout the cerium-azide-cerium unit via a multicentered one-electron (Ce-N3-Ce) interaction. This work extends the family of mixed-valent dilanthanide complexes and provides a paradigm for understanding the bonding motif of ligand-bridged dilanthanide complexes.

Perplexing EPR Signals from 5f36d1 U(II) Complexes

Metal complexes with unpaired electrons in orbitals of different angular momentum quantum numbers (e.g., f and d orbitals) are unusual and opportunities to study the interactions among these electrons are rare. X-band electron paramagnetic resonance (EPR) data were collected at <10 and 77 K on 10 U(II) complexes with 5f36d1 electron configurations and on some analogous Ce(II), Pr(II), and Nd(II) complexes with 4fn5d1 electron configurations. The U(II) compounds unexpectedly display similar two-line axial signals with g|| = 2.04 and g⊥ = 2.00 at 77 K. In contrast, U(II) complexes with 5f4 configurations are EPR-silent. Unlike U(II), the congenic 4f35d1 Nd(II) complex is EPR-silent. The Ce(II) complex with a 4f15d1 configuration is also EPR-silent, but a signal is observed for the Pr(II) complex, which has a 4f25d1 configuration. Whether or not an EPR signal is expected for these complexes depends on the coupling between f and d electrons. Since the coupling in U(II) systems is expected to be sufficiently strong to preclude an EPR signal from compounds with a 5f36d1 configuration, the results are viewed as unexplained phenomena. However, they do show that 5f36d1 U(II) samples can be differentiated from 5f4 U(II) complexes by EPR spectroscopy.

Tridentate Nitrogen Ligand as a Tool for the Construction of Well-Defined Rare Earth Trichloride Complexes

LnCl3(THF)3 (Ln = Y, La ÷ Nd, Sm ÷ Lu) readily react with the tridentate 1,3,5-trimethyl-1,3,5-triazacyclohexane (Me3tach) ligand to form mono- or binuclear lanthanide trichloride complexes, depending on the stoichiometry of the reaction and the ionic radius of the metal: mononuclear pseudosandwich [LnCl3(Me3tach)2], (Ln = Y, La ÷ Ho) or binuclear complexes [Ln2Cl6(Me3tach)3], or [LnCl3(Me3tach)(THF)]2 (Ln = Sm, Tb). Detailed analysis of the NMR data of [LnCl3(Me3tach)2] complexes with paramagnetic lanthanide ions showed that their structures remained unchanged in the toluene solution. A series of isomorphous complexes [LnCl3(Me3tach)(Py)2] (Ln = La, Sm, Tb, Er, Lu; Py = pyridine) have been obtained by the recrystallization of either mononuclear or binuclear complexes from pyridine. Complexes of terbium and europium ions with the Me3tach ligand exhibit relatively high quantum yields of metal-centered luminescence (0.39 and 0.32, respectively).

Thermally Stable Terbium(II) and Dysprosium(II) Bis-amidinate Complexes

The thermostable four-coordinate divalent lanthanide (Ln) bis-amidinate complexes [Ln(Piso)2] (Ln = Tb, Dy; Piso = {(NDipp)2CtBu}, Dipp = C6H3iPr2-2,6) were prepared by the reduction of parent five-coordinate Ln(III) precursors [Ln(Piso)2I] (Ln = Tb, Dy) with KC8; halide abstraction of [Ln(Piso)2I] with [H(SiEt3)2][B(C6F5)] gave the respective Ln(III) complexes [Ln(Piso)2][B(C6F5)]. All complexes were characterized by X-ray diffraction, ICP-MS, elemental analysis, SQUID magnetometry, UV-vis-NIR, ATR-IR, NMR, and EPR spectroscopy and ab initio CASSCF-SO calculations. These data consistently show that [Ln(Piso)2] formally exhibit Ln(II) centers with 4fn5dz21 (Ln = Tb, n = 8; Dy, n = 9) valence electron configurations. We show that simple assignments of the f-d coupling to either L-S or J-s schemes are an oversimplification, especially in the presence of significant crystal field splitting. The coordination geometry of [Ln(Piso)2] is intermediate between square planar and tetrahedral. Projecting from the quaternary carbon atoms of the CN2 ligand backbones shows near-linear C···Ln···C arrangements. This results in strong axial ligand fields to give effective energy barriers to magnetic reversal of 1920(91) K for the Tb(II) analogue and 1964(48) K for Dy(II), the highest values observed for mononuclear Ln(II) single-molecule magnets, eclipsing 1738 K for [Tb(C5iPr5)2]. We tentatively attribute the fast zero-field magnetic relaxation for these complexes at low temperatures to transverse fields, resulting in considerable mixing of mJ states.

Tripodal tris(siloxide) ligand supported trivalent rare-earth metal complexes and redox reactivity

Tripodal tris(siloxide) ligand supported rare-earth metal complexes LLn(III) (Ln = Ce, Pr, Tb, Y, Lu) were synthesized. The Ce(III) complex was oxidized with [N(C6H4Br)3][SbCl6] to a Ce(IV) chloride complex, which reacted with tBuONa to form a Ce(IV) tert-butoxide complex, one displaying a reduction potential cathodically shifted relative to that of Ce(IV) chloride complex.

Two-Electron Oxidations at a Single Cerium Center

Two-electron oxidations are ubiquitous and play a key role in the synthesis and catalysis. For transition metals and actinides, two-electron oxidation often takes place at a single-metal site. However, redox reactions at rare-earth metals have been limited to one-electron processes due to the lack of accessible oxidation states. Despite recent advancements in nontraditional oxidation state chemistry, the low stability of low-valent compounds and large disparity among different oxidation states prevented the implementation of two-electron processes at a single rare-earth metal center. Here we report two-electron oxidations at a cerium(II) center to yield cerium(IV) terminal oxo and imido complexes. A series of cerium(II-IV) complexes supported by a tripodal tris(amido)arene ligand were synthesized and characterized. Experimental and theoretical studies revealed that the cerium(II) complex is best described as a 4f2 ion stabilized by δ-backdonation to the anchoring arene, while the cerium(IV) oxo and imido complexes exhibit multiple bonding characters. The accomplishment of two-electron oxidations at a single cerium center brings a new facet to molecular rare-earth metal chemistry.

Isolation and redox reactivity of cerium complexes in four redox states

The chemistry of lanthanides is limited to one electron transfer reactions due to the difficulty of accessing multiple oxidation states. Here we report that a redox-active ligand combining three siloxides with an arene ring in a tripodal ligand can stabilize cerium complexes in four different redox states and can promote multielectron redox reactivity in cerium complexes. Ce(iii) and Ce(iv) complexes [(LO₃)Ce(THF)] (1) and [(LO₃)CeCl] (2) (LO₃ = 1,3,5-(2-OSi(O^tBu)₂C₆H₄)₃C₆H₃) were synthesized and fully characterized. Remarkably the one-electron reduction and the unprecedented two-electron reduction of the tripodal Ce(iii) complex are easily achieved to yield reduced complexes [K(2.2.2-cryptand)][(LO₃)Ce(THF)] (3) and [K₂{(LO₃)Ce(Et₂O)₃}] (5) that are formally "Ce(ii)" and "Ce(i)" analogues. Structural analysis, UV and EPR spectroscopy and computational studies indicate that in 3 the cerium oxidation state is in between +II and +III with a partially reduced arene. In 5 the arene is doubly reduced, but the removal of potassium results in a redistribution of electrons on the metal. The electrons in both 3 and 5 are stored onto δ-bonds allowing the reduced complexes to be described as masked "Ce(ii)" and "Ce(i)". Preliminary reactivity studies show that these complexes act as masked Ce(ii) and Ce(i) in redox reactions with oxidizing substrates such as Ag⁺, CO₂, I₂ and S₈ effecting both one- and two-electron transfers that are not accessible in classical cerium chemistry.

Synthesis and Crystallographic Characterization of a Reduced Bimetallic Yttrium ansa-Metallocene Hydride Complex, [K(crypt)][(μ-CpAn)Y(μ-H)]2 (CpAn = Me2Si[C5H3(SiMe3)-3]2), with a 3.4 Å Yttrium-Yttrium Distance

The reduction of a bimetallic yttrium ansa-metallocene hydride was examined to explore the possible formation of Y-Y bonds with 4d¹ Y(II) ions. The precursor [Cp^AnY(μ-H)(THF)]₂ (Cp^An = Me₂Si[C₅H₃(SiMe₃)-3]₂) was synthesized by hydrogenolysis of the allyl complex Cp^AnY(η³-C₃H₅)(THF), which was prepared from (C₃H₅)MgCl and [Cp^AnY(μ-Cl)]₂. Treatment of [Cp^AnY(μ-H)(THF)]₂ with excess KC₈ in the presence of one equivalent of 2.2.2-cryptand (crypt) generates an intensely colored red-brown product crystallographically identified as [K(crypt)][(μ-Cp^An)Y(μ-H)]₂. The two rings of each Cp^An ligand in the reduced anion [(μ-Cp^An)Y(μ-H)]₂^1- are attached to two yttrium centers in a "flyover" configuration. The 3.3992(6) and 3.4022(7) Å Y···Y distances between the equivalent metal centers within two crystallographically independent complexes are the shortest Y···Y distances observed to date. Ultraviolet-visible (UV-visible)/near infrared (IR) and electron paramagnetic resonance (EPR) spectroscopy support the presence of Y(II), and theoretical analysis describes the singly occupied molecular orbital (SOMO) as an Y-Y bonding orbital composed of metal 4d orbitals mixed with metallocene ligand orbitals. A dysprosium analogue, [K(18-crown-6)(THF)₂][(μ-Cp^An)Dy(μ-H)]₂, was also synthesized, crystallographically characterized, and studied by variable temperature magnetic susceptibility. The magnetic data are best modeled with the presence of one 4f⁹ Dy(III) center and one 4f⁹(5d_z²)¹ Dy(II) center with no coupling between them. CASSCF calculations are consistent with magnetic measurements supporting the absence of coupling between the Dy centers.

Highly Diastereoselective Multicomponent Synthesis of Spirocyclopropyl Oxindoles Enabled by Rare-Earth Metal Salts

The synthesis of polysubstituted spirocyclopropyl oxindoles using a series of rare-earth metal (REM) salts is reported. REMs, in particular Sc(OTf)₃, allowed access to the target compounds by a multicomponent reaction with high diastereoselectivity (≤94:6:0:0). Density functional theory calculations on the model reaction are consistent with the observed selectivity and revealed that the special coordinating capabilities and the oxophilicity of the metal are key factors in inducing the formation of one main diastereoisomer.

Trimethyltriazacyclohexane coordination chemistry of simple rare-earth metal salts

Reactions of 1,3,5-trimethyl-triazacyclohexane (Me₃tach) with common rare-earth metal iodide, chloride, and triflate salts were examined to determine the capacity of this inexpensive chelate to provide alternative precursors for THF-free reactions. The reaction of LaI₃(THF)₄ and CeI₃(THF)₄ with 1,3,5-trimethyl-triazacyclohexane in THF generated toluene soluble (Me₃tach)₂LnI₃, 1-Ln, in which the Ln center has a tri-capped trigonal prismatic geometry with two eclipsed Me₃tach rings. Reaction with NdI₃(THF)_3.5 forms the analogous 1-Nd, but a different structure with one outer sphere iodide, [(Me₃tach)₂NdI₂][I], 2-Nd, is also accessible and has a structure reminiscent of bent metallocenes. The reaction of LaCl₃ and Me₃tach forms the less soluble (Me₃tach)₂LaCl₃, which has a structure analogous to 1-Ln with eclipsed Me₃tach rings. The mono-ring yttrium complex, (Me₃tach)YCl₃(THF)₂, could be isolated from the reaction of YCl₃ with Me₃tach. Reactions of La(OTf)₃ with Me₃tach were sensitive to the presence of residual proton sources as exemplified by the isolation of {[(Me₃tach)La(μ-OH)(μ-OTf)]₂(μ-OTf)₂}₂, 5-La, and [HMe₃tach][(Me₃tach)₂La-(OTf)₄], 6-La. SmI₂ reacts with Me₃tach to produce the Sm(II) complex, (Me₃tach)₂SmI₂(THF), 7-Sm, but 2-Sm can also form in this reaction. Complexes of the larger 1,4,7-trimethyltriazacyclononane (Me₃tacn) ligand, namely (Me₃tacn)LaI₃(THF), (Me₃tacn)YCl₃, and (Me₃tacn)SmI₂(THF) were synthesized for comparison. Several examples of the protonated ligands with simple counteranions, [HMe₃tach][X] (X = Cl, Br, I) and [HMe₃tacn][OTf], were identified in the course of these studies.

Selective Cleavage of the Strong or Weak C-C Bonds in Biphenylene Enabled by Rare-Earth Metals

Selective cleavage of C-C bonds within arene rings is of great interest but remains elusive, especially for the molecules possessing the active and inert C-C bonds. Here, we report that the active and inert C-C bonds of biphenylene could be controllably cleaved by the reaction of biphenylene, potassium graphite, and rare-earth complexes with different metal centers. For scandium, the bond activation occurs at the C_aryl-C_aryl single bond, yielding 9-scandafluorene. For Lu, the reaction goes through ring contraction of the aromatic ring in biphenylene to provide benzopentalene dianionic lutetium. The origin of the selectivity and the reaction mechanism were illustrated by the isolation of intermediates and DFT calculations.

Modulating the electronic properties of divalent lanthanoid complexes with subtle ligand tuning

Five new compounds of formula [Ln^II(Me_ntpa)₂](BPh₄)₂ (Ln = Eu, n = 0 (1-Eu), n = 2 (2-Eu) and n = 3 (3-Eu); Ln = Yb, n = 0 (1-Yb) and n = 2 (2-Yb); tpa = tris(2-pyridylmethyl)amine, n = 0-3 corresponds to successive methylation of the 6-position of the pyridine rings of Me_ntpa) have been synthesized and their structural, photophysical and electrochemical properties investigated. The Ln^II ions in the five complexes possess cubic coordination geometry and exhibit only small structural differences, due to the lengthening of the Ln-N bonds to accommodate the additional steric bulk associated with increasing methylation of the Me_ntpa ligands. Photophysical studies indicate moderate shifts in absorbance, emission and excitation bands associated with the 4f⁷ ↔ 4f⁶5d¹ (Eu^II) and 4f¹⁴ ↔ 4f¹³5d¹ (Yb^II) transitions, while electrochemistry reveals modulation of the redox potential of the Ln^II to Ln^III oxidation. There is a strong correlation between Ln-N bond lengths and both the photophysical transition energies and metal redox-potentials, revealing how subtle ligand changes and ligand field effects can be used to modulate the electronic properties of complexes of divalent lanthanoid ions. Utilization of these insights may ultimately afford design and property tuning strategies for future functional molecular complexes based on divalent lanthanoid metals.

Syndiospecific Copolymerization of Styrene with para-Methoxystyrene Catalyzed by Functionalized Fluorenyl-Ligated Rare-Earth Metal Complexes

The development of efficient catalysts for the copolymerization of nonpolar monomers with polar monomers remains a great challenging task in polymer synthesis. A one-pot reaction of anhydrous LnCl₃ with pyridyl-methylene-functionalized octamethylfluorenyl lithium OctFlu-CH₂PyLi in a 1:1 molar ratio, followed by alkylation with 2 equiv of LiCH₂SiMe₃ in THF afforded the fluorenyl-ligated rare-earth metal bis(alkyl) complexes (OctFlu-CH₂Py)Ln(CH₂SiMe₃)₂(THF) [Ln = Sc (1), Y (2)]. Both complexes were isolated as neutral species and were characterized by NMR spectrum and elemental analysis. Complex 2 was subjected to single-crystal X-ray diffraction, which showed that the whole modified fluorenyl ligand was coordinated to Y³⁺ in the η⁵/κ¹ mode to form a constrained geometry configuration. In the presence of excess AlⁱBu₃, and on activation with 1 equiv of [Ph₃C][B(C₆F₅)₄] in toluene, complexes 1 and 2 became active for both styrene (St) and para-methoxystyrene (pMOS) polymerization, giving polymers with high syndiotacticity (rrrr > 99%) without solvent extraction. Moreover, the ternary catalyst system composed of complex 2/AlⁱBu₃/[Ph₃C][B(C₆F₅)₄] was highly effective for the syndiospecific copolymerization of styrene with pMOS, producing random copolymers with high molecular weights and narrow molecular weight distributions. The contents of pMOS in the copolymers could be easily tuned in a wide range (11-93 mol %) by simply changing the pMOS-to-St feed ratios.

Reduction chemistry yields stable and soluble divalent lanthanide tris(pyrazolyl)borate complexes

Reduction of the heteroleptic Ln(III) precursors [Ln(Tp)₂(OTf)] (Tp = hydrotris(1-pyrazolyl)borate; OTf = triflate) with either an aluminyl(I) anion or KC₈ yielded the adduct-free homoleptic Ln(II) complexes dimeric 1-Eu [{Eu(Tp)(μ-κ¹:η⁵-Tp)}₂] and monomeric 1-Yb [Yb(Tp)₂]. Complexes 1-Ln have good solubility and stability in both non-coordinating and coordinating solvents. Reaction of 1-Ln with 2 Ph₃PO yielded 1-Ln(OPPh3)2. All complexes are intensely coloured and 1-Eu is photoluminescent. The electronic absorption data show the 4f-5d electronic transitions in Ln(II). Single-crystal X-ray diffraction data reveal first μ-κ¹:η⁵-coordination mode of the unsubstituted Tp ligand to lanthanides in 1-Eu.

Back to the future of organolanthanide chemistry

At the dawn of the development of structural organometallic chemistry, soon after the discovery of ferrocene, the description of the LnCp₃ complexes, featuring large and mostly trivalent lanthanide ions, was rather original and sparked curiosity. Yet, the interest in these new architectures rapidly dwindled due to the electrostatic nature of the bonding between π-aromatic ligands and 4f-elements. Almost 70 years later, it is interesting to focus on how the discipline has evolved in various directions with the reports of multiple catalytic reactivities, remarkable potential in small molecule activation, and the development of rich redox chemistry. Aside from chemical reactivity, a better understanding of their singular electronic nature - not precisely as simplistic as anticipated - has been crucial for developing tailored compounds with adapted magnetic anisotropy or high fluorescence properties that have witnessed significant popularity in recent years. Future developments shall greatly benefit from the detailed reactivity, structural and physical chemistry studies, particularly in photochemistry, electro- or photoelectrocatalysis of inert small molecules, and manipulating the spins' coherence in quantum technology.

Room-Temperature Stable Ln(II) Complexes Supported by 2,6-Diadamantyl Aryloxide Ligands

The sterically bulky aryloxide ligand OAr* (OAr* = ^-OC₆H₂-Ad₂-2,6^tBu-4; Ad = 1-adamantyl) has been used to generate Ln(II) complexes across the lanthanide series that are more thermally stable than complexes of any other ligand system reported to date for 4fⁿd¹ Ln(II) ions. The Ln(III) precursors Ln(OAr*)₃ (1-Ln) were synthesized by reacting 1.2 equiv of Ln(NR₂)₃ (R = SiMe₃) with 3 equiv of HOAr* for Ln = La, Ce, Nd, Gd, Dy, Yb, and Lu. 1-Ce, 1-Nd, 1-Gd, 1-Dy, and 1-Lu were identified by single-crystal X-ray diffraction studies. Reductions of 1-Ln with potassium graphite (KC₈) in tetrahydrofuran in the presence of 2.2.2-cryptand (crypt) yielded the Ln(II) complexes [K(crypt)][Ln(OAr*)₃] (2-Ln). The 2-Ln complexes for Ln = Nd, Gd, Dy, and Lu were characterized by X-ray crystallography and found to have Ln-O bond distances 0.038-0.087 Å longer than those of their 1-Ln analogues; this is consistent with 4fⁿ5d¹ electron configurations. The structure of 2-Yb has Yb-O distances 0.167 Å longer than those predicted for 1-Yb, which is consistent with a 4f¹⁴ electron configuration. Although 2-La and 2-Ce proved to be challenging to isolate, with 18-crown-6 (18-c-6) as the potassium chelator, La(II) and Ce(II) complexes with OAr* could be isolated and crystallographically characterized: [K(18-c-6)][Ln(OAr*)₃] (3-Ln). The Ln(II) complexes decompose at room temperature more slowly than other previously reported 4fⁿ5d¹ Ln(II) complexes. For example, only 30% decomposition of 2-Dy was observed after 30 h at room temperature compared to complete decomposition of [Dy(OAr')₃]^- and [DyCp'₃]^- under similar conditions (OAr' = OC₆H₂-2,6-^tBu₂-4-Me; Cp' = C₅H₄SiMe₃).

Bis(3,4-diphenyl)(2-methythienyl)cyclopentadienyl Terbium Chloride

A new terbium(III) complex with a (3,4-diphenyl)(2-methylthienyl)cyclopentadienyl ligand was synthesized. Single-crystal X-ray analysis revealed a binuclear biscyclopentadienyl complex with a [TbCl2K]2 core. Luminescence properties of the terbium complex were analyzed.

Sm(II)-Mediated Proton-Coupled Electron Transfer: Quantifying Very Weak N-H and O-H Homolytic Bond Strengths and Factors Controlling Them

Coordination of alcohols to the single-electron reductant samarium diiodide (SmI2) results in substantial O-H bond weakening, affording potent proton-coupled electron transfer (PCET) reagents. However, poorly defined speciation of SmI2 in tetrahydrofuran (THF)/alcohol mixtures limits reliable thermodynamic analyses of such systems. Rigorous determination of bond dissociation free energy (BDFE) values in such Sm systems, important to evaluating their reactivity profiles, motivates studies of model Sm systems where contributing factors can be teased apart. Here, a bulky and strongly chelating macrocyclic ligand ((tBu2ArOH)2Me2cyclam) maintains solubility, eliminates dimerization pathways, and facilitates clean electrochemical behavior in a well-defined functional model for the PCET reactivity of SmII with coordinating proton sources. Direct measurement of thermodynamic parameters enables reliable experimental estimation of the BDFEs in 2-pyrrolidone and MeOH complexes of ((tBu2ArO)2Me2cyclam)SmII, thereby revealing exceptionally weak N-H and O-H BDFEs of 27.2 and <24.1 kcal mol-1, respectively. Expanded thermochemical cycles reveal that this bond weakening stems from the very strongly reducing SmII center and the formation of strong SmIII-alkoxide (and -pyrrolidonate) interactions in the PCET products. We provide a detailed analysis comparing these BDFE values with those that have been put forward for SmI2 in THF in the presence of related proton donors. We suggest that BDFE values for the latter systems may in fact be appreciably higher than the system described herein. Finally, protonation and electrochemical reduction steps necessary for the regeneration of the PCET donors from SmIII-alkoxides are demonstrated, pointing to future strategies aimed at achieving (electro)catalytic turnover using SmII-based PCET reagents.

Identification of the U(V) complex (C5Me5)2UVI(NSiMe3) in the reaction of (C5Me5)2UIIII(THF) with N3SiMe3

The U(V) imido complex (C₅Me₅)₂U^VI(NSiMe₃), 1, was crystallographically characterized from the reaction of (C₅Me₅)₂U^IIII(THF) with N₃SiMe₃ which demonstrates that it can be an intermediate in the reaction which ultimately forms (C₅Me₅)₂U^VI(NSiMe₃)₂ and (C₅Me₅)₂U^IVI₂. U(V) intermediates have been proposed in such reactions, but have not been previously observed. The direct observation of 1 provides insight into the reaction mechanisms of U(III) compounds with azide reagents.

Expanding Bismuth Trihalide Coordination Chemistry with Trimethyltriazacyclohexane and Trimethyltriazacyclononane

1,3,5-Trimethyltriazacyclohexane, Me₃tach, readily adds to bismuth triiodide to form a variety of new coordination compounds depending on the stoichiometry, solvent, and crystallization conditions. X-ray crystallographic evidence has been obtained for both 2:1 and 1:1 Me₃tach:Bi complexes with formulas of [(Me₃tach)₂BiI₂][(Me₃tach)BiI₄], [(Me₃tach)₂BiI₂]₃[Bi₂I₉][I][HMe₃tach]·THF, and (Me₃tach)BiI₃(py)₂. The related chloride structure (Me₃tach)BiCl₃(py)₂ forms from BiCl₃. The structure of (Me₃tacn)BiI₃ with the larger chelate, 1,4,7-trimethyltriazacyclononane, Me₃tacn, was obtained for comparison, and the polymeric structure of BiI₃ in THF was defined as [BiI(THF)(μ-I)₂]_n.

π-Carbazolyl supported bis(alkyl) complexes of Sc, Y and La for α-olefin polymerization and hydrogenation

A series of new half-sandwich bis(alkyl) rare-earth metal complexes coordinated by a sterically demanding 1,3,6,8-tetra-tert-butyl-carbazol-9-yl ligand [tBu₄Carb]La(CH₂C₆H₅)₂(THF) (1-La), [tBu₄Carb]Ln(o-NMe₂C₆H₄CH₂)₂ (Ln = Sc (2-Sc), Y (2-Y), La (2-La), [tBu₄Carb]Ln(CH₂SiMe₃)₂(THF) (Ln = Sc (3-Sc), Y (3-Y)), were synthesized. 1-La, 2-La, and 2-Y were prepared by an alkane elimination protocol, while 2-Sc, 3-Sc, and 3-Y became accessible only when salt metathesis reactions of tBu₄CarbK with R₂Ln(THF)_n⁺[BPh₄]^- were employed. X-ray analysis revealed that in all complexes the carbazolyl ligand exhibits π-coordination with metal ions. 2-Sc and 3-Sc when activated with [Ph₃C][B(C₆F₅)₄] demonstrate excellent activity in α-olefin (octene-1, nonene-1, decene-1 and 1,1-diphenyl-but-1-ene) polymerization. When H₂ was used as a chain transfer agent (1 bar, rt) in the presence of 3-Sc/[Ph₃C][B(C₆F₅)₄] or 2-Y, 2-La olefin hydrogenation occurred with quantitative conversion.

Ultra-Efficient Americium/Lanthanide Separation through Oxidation State Control

Lanthanide/actinide separation is a worldwide challenge for atomic energy and nuclear waste treatment. Separation of americium (Am), a critical actinide element in the nuclear fuel cycle, from lanthanides (Ln) is highly desirable for minimizing the long-term radiotoxicity of nuclear waste, yet it is extremely challenging given the chemical similarity between trivalent Am(III) and Ln(III). Selective oxidation of Am(III) to a higher oxidation state (OS) could facilitate this separation, but so far, it is far from satisfactory for practical application as a result of the unstable nature of Am in a high OS. Herein, we find a novel strategy to generate stable pentavalent Am (Am(V)) through coordination of Am(III) with a diglycolamide ligand and oxidation with Bi(V) species in the presence of an organic solvent. This strategy leads to efficient stabilization of Am(V) and an extraordinarily high separation factor (>10⁴) of Am from Ln through one single contact in solvent extraction, thereby opening a new avenue to study the high-OS chemistry of Am and fulfill the crucial task of Ln/Am separation in the nuclear fuel cycle. The synergistic coordination and oxidation process is found to occur in the organic solvent, and the mechanism has been well elucidated by quantum-theoretical modeling.

Bis(η5-cyclo-penta-dien-yl)(2-{[(2-meth-oxy-phen-yl)imino]-meth-yl}phenolato-κ3 O,N,O')terbium

The air- and moisture-sensitive title compound, [Tb(C5H5)2(C14H12NO2)], was synthesized from tris-(cyclo-penta-dien-yl)(tetra-hydro-furan)-terbium and 2-{[(2-meth-oxy-phen-yl)imino]-meth-yl}phenol. Each Tb atom is coordinated by two cyclo-penta-dienyl ligands in an η5-coordination mode and by one N and two O atoms of the organic ligand in a tridentate κ3 O,N,O'-mode.

On the usability of salt metathesis reactions for the synthesis of sterically crowded tris-formamidinate Ln(iii) complexes: success and limits. Spontaneous reduction of Eu(iii) to Eu(ii)

New homoleptic complexes of Eu3+ and Nd3+ bearing three bulky N,N′-bis(diisopropylphenyl)formamidinates were prepared using salt metathesis in a toluene medium. In the presence of THF, the sterically-induced reduction of Eu3+ to Eu2+ was observed.

Exploiting the upconversion luminescence, Lewis acid catalytic and photothermal properties of lanthanide-based nanomaterials for chemical and polymerization reactions

Lanthanide-based nanocrystals possess three unique physical properties that make them attractive for facilitating photoreactions, namely photon upconversion, Lewis acid catalytic activity and photothermal effect. When co-doped with suitable sensitizer and...