A Peierls Transition in Long Polymethine Molecular Wires: Evolution of Molecular Geometry and Single-Molecule Conductance

Tetraanionic Oligo-Dioxaborines: Strongly Absorbing Near-Infrared Dyes

Polymethine dyes of tetraanionic nature comprising 1,3,2-dioxaborine rings in the polymethine chain and end-groups of different electron-accepting abilities have been synthesized. They can be considered as oligomeric polymethines, where a linear conjugated π-system passes through three 1,3,2-dioxaborine units and a number of tri- and dimethine π-bridges between two end-groups. The obtained dyes exhibit near-infrared absorption and fluorescence, with molar absorption coefficients reaching as high as 564000 M-1 cm-1 in DMF, rendering them among the strongest absorbers known. The novel compounds are bright NIR fluorophores, with fluorescence quantum yields up to 0.13 in DMF. A comparative analysis of the electronic structure of the obtained dyes with respective dianionic and trianionic oligomers was conducted through quantum chemical calculations.

Colorless Near-Infrared Absorbing Dyes Based on B-N Fused Donor-Acceptor-Donor π-Conjugated Molecules for Organic Phototransistors

The introduction of a colorless function to organic electronic devices allows responses to light in the near-infrared (NIR) region and is expected to broaden the applications of these devices. However, the development of a colorless NIR dye remains a challenge due to the lack of a rational molecular design for controlling electronic transitions. In this study, to suppress the π-π* transitions in the visible region, polycyclic donor-acceptor-donor π-conjugated molecules with boron bridges (Py-FNTz-B and IP-FNTz-B) are designed and synthesized, which contain pyrrole or indenopyrrole as donor units with fluorinated naphthobisthiadiazole (FNTz) as an acceptor unit. The pyrrole end-capped Py-FNTz-B shows an absorption band in the NIR region without distinct visible-light absorption, which has led to the establishment of colorless characteristics. The indenopyrrole end-capped IP-FNTz-B shows a narrow optical energy gap of 0.87 eV in films. Time-resolved microwave conductance and field-effect transistors demonstrate the semiconducting characteristics of these molecules, and Py-FNTz-B-based devices function as NIR phototransistors. Theoretical analyses indicate that the combination of a polyene-like electronic structure with orbital symmetry is important to obtain NIR wavelength-selective absorption. This study suggests that a molecular design based on electronic structures can be effective in the development of colorless NIR-absorbing dyes for organic electronics.

Switch-on near infrared emission in albumin behind dark fabric: toward application in forensic latent bloodstain detection

Latent bloodstain detection remains imperative for crime scene investigators. Widely used luminol offers high sensitivity to human blood, but can produce untrustworthy results from a bleach-cleaned crime scene or in a room not dark enough. Furthermore, dark pigments impede imaging bloodstains covered by dark materials with previously reported bloodstain detection agents. A novel on/off human albumin-sensing dye (SO3C7) is reported herein with a longer emission wavelength (942 nm) than previous materials that allows imaging behind ∼5 mm of black fabric. The switch-on emission of SO3C7 is selective and sensitive to human albumin and lasts longer than luminol (24-48 hours). Emission studies, transient absorption spectra (TAS), and near-infrared (NIR) photographs herein describe the albumin sensing properties of the dye.

Chemical Approaches to Optimize the Properties of Organic Fluorophores for Imaging and Sensing

Organic fluorophores are indispensable tools in cells, tissue and in vivo imaging, and have enabled much progress in the wide range of biological and biomedical fields. However, many available dyes suffer from insufficient performances, such as short absorption and emission wavelength, low brightness, poor stability, small Stokes shift, and unsuitable permeability, restricting their application in advanced imaging technology and complex imaging. Over the past two decades, many efforts have been made to improve these performances of fluorophores. Starting with the luminescence principle of fluorophores, this review clarifies the mechanisms of the insufficient performance for traditional fluorophores to a certain extent, systematically summarizes the modified approaches of optimizing properties, highlights the typical applications of the improved fluorophores in imaging and sensing, and indicates existing problems and challenges in this area. This progress not only proves the significance of improving fluorophores properties, but also provide a theoretical guidance for the development of high-performance fluorophores.

Assessing the importance of multireference correlation in predicting reversed conductance decay

In a classical electronic resistor, conductance decays as the device length increases according to Ohm's Law. While most molecular series display a comparable exponential decay in conductance with increasing molecular length, a class of single-molecule device series exists where conductance instead increases with molecular/device length, a phenomenon called reversed conductance decay. While reversals of conductance decay have been repeatedly theoretically predicted, they have been far more difficult to demonstrate experimentally. Previous studies have suggested that theoretical multi-reference(static) correlation errors may be a major cause of this discrepancy, yet most single-molecule transport methods are unable to treat multireference correlation. Using our unique multireference transport method based on non-equilibrium Green's function and multiconfigurational pair-density functional theory (NEGF-MCPDFT), we examined a previously predicted case of reversed conductance decay in systems of linear chains of phenyl rings with varying lengths and electrode designs. We compare our NEGF-MCPDFT results to those of non-multireference NEGF methods to quantify the exact role of static correlation in conductance decay reversals and clarify their relative importance to geometric and electrode design/coupling considerations.

Ballistic Conductance through Porphyrin Nanoribbons

The search for long molecular wires that can transport charge with maximum efficiency over many nanometers has driven molecular electronics since its inception. Single-molecule conductance normally decays with length and is typically far below the theoretical limit of G0 (77.5 μS). Here, we measure the conductances of a family of edge-fused porphyrin ribbons (lengths 1-7 nm) that display remarkable behavior. The low-bias conductance is high across the whole series. Charging the molecules in situ results in a dramatic realignment of the frontier orbitals, increasing the conductance to 1 G0 (corresponding to a current of 20 μA). This behavior is most pronounced in the longer molecules due to their smaller HOMO-LUMO gaps. The conductance-voltage traces frequently exhibit peaks at zero bias, showing that a molecular energy level is in resonance with the Fermi level. This work lays the foundations for long, perfectly transmissive, molecular wires with technological potential.

Molecular Graphene Nanoribbon Junctions

One of the challenges for the realization of molecular electronics is the design of nanoscale molecular wires displaying long-range charge transport. Graphene nanoribbons are an attractive platform for the development of molecular wires with long-range conductance owing to their unique electrical properties. Despite their potential, the charge transport properties of single nanoribbons remain underexplored. Herein, we report a synthetic approach to prepare N-doped pyrene-pyrazinoquinoxaline molecular graphene nanoribbons terminated with diamino anchoring groups at each end. These terminal groups allow for the formation of stable molecular graphene nanoribbon junctions between two metal electrodes that were investigated by scanning tunneling microscope-based break-junction measurements. The experimental and computational results provide evidence of long-range tunneling charge transport in these systems characterized by a shallow conductance length dependence and electron tunneling through >6 nm molecular backbone.

Phospha-cyanines in Their Ideal Polymethine State: Synthesis and Structure-Property Relationships

We report the synthesis and full characterization of a family of phosphorus-containing polymethine cyanines (phospha-cyanines). The compounds are easily prepared in two steps, starting from readily available phosphanes. The impact of the P-substituents and the counterions on the structural and optical properties is investigated through a joint experimental/theoretical approach. Based on the study of the single-crystal X-ray diffraction structures, all phospha-cyanines present a bond length alternation close to zero, independently of the substituents and counterions, which indicates an ideal polymethine state. All these compounds display the typical cyanine-like UV-vis absorption with an intense and sharp transition with a vibronic shoulder despite possessing a reverse electronic configuration compared to "classical" cyanines. Time-dependent density-functional theory calculations allowed us to fully rationalize the optical properties (absorption/emission wavelengths, luminescence quantum yields). Interestingly, due to the tetrahedral shape of the P atom, the optical properties are independent of the counterion, which is in marked contrast with N-analogues, which enables predictive engineering of the phospha-cyanines regardless of the medium in which they are used.

Rigid and Photostable Shortwave Infrared Dye Absorbing/Emitting beyond 1200 nm for High-Contrast Multiplexed Imaging

The shortwave infrared (SWIR) spectral region beyond 1200 nm offers optimal tissue penetration depth and has broad potential in diagnosis, therapy, and surgery. Here, we devised a novel class of fluorochromic scaffold, i.e., a tetra-benzannulated xanthenoid (EC7). EC7 absorbs/emits maximally at 1204/1290 nm in CH₂Cl₂ and exhibits an unparalleled molar absorptivity of 3.91 × 10⁵ cm^-1 M^-1 and high transparency to light at 400-900 nm. It also exhibited high resistance toward both photobleaching and symmetry breaking due to its unique structural rigidity. It is feasible for in vivo bioimaging and particularly suitable to couple with the shorter-wavelength analogues for high-contrast multiplexing. High-contrast dual-channel intraoperative imaging of the hepatobiliary system and three-channel in vivo imaging of the intestine, the stomach, and the vasculature were showcased. EC7 is a benchmark fluorochrome for facile biomedical exploitation of the SWIR region beyond 1200 nm.

NIR-II Dyad-Doped Ratiometric Nanosensor with Enhanced Spectral Fidelity in Biological Media for In Vivo Biosensing

Ratiometric fluorescence nanosensors provide quantitative biological information. However, spectral shift and distortion of ratiometric nanosensors in biological media often compromise sensing accuracy, limiting in vivo applications. Here, we develop a fluorescent dyad (aBOP-IR1110) in the second near-infrared (NIR-II) window by covalently linking an asymmetric aza-BODIPY with a ONOO^--responsive meso-thiocyanine. The dyad encapsulated in the PEGylated nanomicelle largely improves spectral fidelity in serum culture by >9.4 times compared to that of its noncovalent counterpart. The increased molecular weights (>1480 Da) and hydrophobicity (LogP of 7.87-12.36) lock dyads inside the micelles, which act as the shield against the external environment. ONOO^--altered intramolecular Förster resonance energy transfer (FRET) generates linear ratiometric response with better serum tolerance, enabling us to monitor the dynamics of oxidative stress in traumatic brain injury and evaluate therapeutic efficiency. The results show high correlation with in vitro triphenyltetrazolium chloride staining, suggesting the potential of NIR-II dyad-doped nanosensor for in vivo high-fidelity sensing applications.

Discovery of BODIPY J-aggregates with absorption maxima beyond 1200 nm for biophotonics

Organic dyes with absorption maxima in the second near-infrared window (NIR-II; 1000 to 1700 nm) are of great interest in biophotonics. However, because of the lack of appropriate molecular scaffolds, current research in this field is limited to cyanine dyes, and developing NIR-II-absorbing organic dyes for biophotonics remains an immense challenge. Here, we rationally designed an ethenylene-bridged BODIPY scaffold featuring excellent J-aggregation capabilities and revealed that the bridging ethylene unit is crucial for intermolecular J-coupling regulation. By integrating the electron-donating groups into the scaffold, we obtained a BODIPY dye, BisBDP2, with a J-aggregate absorption maximum of around 1300 nm. BisBDP2 J-aggregates show excellent photothermal performance, including intense photoacoustic response, and a high photothermal conversion efficiency value of 63%. In vivo results demonstrate the potential of J-aggregates for photoacoustic imaging and photothermal ablation of deep-seated tumors. This study will speed up the exploration of NIR-II-absorbing J-aggregates for future biophotonic applications.

Reversed Conductance Decay of 1D Topological Insulators by Tight-Binding Analysis

Reversed conductance decay describes increasing conductance of a molecular chain series with increasing chain length. Realizing reversed conductance decay is an important step toward making long and highly conducting molecular wires. Recent work has shown that one-dimensional topological insulators (1D TIs) can exhibit reversed conductance decay due to their nontrivial edge states. The Su-Schrieffer-Heeger (SSH) model for 1D TIs relates to the electronic structure of these isolated molecules but not their electron transport properties as single-molecule junctions. Herein, we use a tight-binding approach to demonstrate that polyacetylene and other diradicaloid 1D TIs show a reversed conductance decay at the short chain limit. We explain these conductance trends by analyzing the impact of the edge states in these 1D systems on the single-molecule junction transmission. Additionally, we discuss how the self-energy from the electrode-molecule coupling and the on-site energy of the edge sites can be tuned to create longer wires with reversed conductance decays.

Two-step thermotropic phase transition and dielectric relaxation in 1D supramolecular lead iodide perovskite [NH4@18-crown ether]PbI3

The supramolecular lead iodide perovskite crystals, {[NH₄(18-crown-6)]PbI₃}_∞ (1), (18-crown-6 = 1,4,7,10,13,16-hexaoxacyclooctadecane), was successfully achieved by a facile solvent evaporation strategy using a DMF solution containing equal molar quantities of PbI₂, NH₄I and 18-crown-6. The supramolecular perovskite was characterized by microanalysis for C, H and N elements, thermogravimetric (TG) analysis, differential scanning calorimetry (DSC), powder X-ray diffraction (PXRD) and single crystal X-ray diffraction techniques. DSC measurements demonstrated that 1 experiences a two-step thermotropic phase transition around 333 K and 383 K, respectively. The phase transition is relevant to the disorder-order transformation of the 18-crown-6 molecule at ∼333 K, while both breaking-symmetry and ordered-disordered transformation of the 18-crown-6 molecule occurred at ∼383 K. In addition, the sharp change of the PbI₆ coordination octahedron distortion degree plays a synergistic role in the two-step phase transition. The dielectric relaxation occurs above 243 K in 1 and is mainly attributed to the displacement of the NH₄⁺ ions relative to the ring of the 18-crown-6 molecule and {PbI₃}_∞ chain induced by an AC electrical field.

Supramolecular Mitigation of the Cyanine Limit Problem

Currently, there is a substantial research effort to develop near-infrared fluorescent polymethine cyanine dyes for biological imaging and sensing. In water, cyanine dyes with extended conjugation are known to cross over the "cyanine limit" and undergo a symmetry breaking Peierls transition that favors an unsymmetric distribution of π-electron density and produces a broad absorption profile and low fluorescence brightness. This study shows how supramolecular encapsulation of a newly designed series of cationic, cyanine dyes by cucurbit[7]uril (CB7) can be used to alter the π-electron distribution within the cyanine chromophore. For two sets of dyes, supramolecular location of the surrounding CB7 over the center of the dye favors a nonpolar ground state, with a symmetric π-electron distribution that produces a sharpened absorption band with enhanced fluorescence brightness. The opposite supramolecular effect (i.e., broadened absorption and partially quenched fluorescence) is observed with a third set of dyes because the surrounding CB7 is located at one end of the encapsulated cyanine chromophore. From the perspective of enhanced near-infrared bioimaging and sensing in water, the results show how that the principles of host/guest chemistry can be employed to mitigate the "cyanine limit" problem.