Conjugated Metal-Organic Macrocycles: Synthesis, Characterization, and Electrical Conductivity

A Rhombic 2D Conjugated Metal-Organic Framework as Cathode for High-Performance Sodium-Ion Battery

2D conjugated metal-organic frameworks (2D c-MOFs) have garnered significant attention as promising electroactive materials for energy storage. However, their further applications are hindered by low capacity, limited cycling life, and underutilization of the active sites. Herein, Cu-TBA (TBA = octahydroxyltetrabenzoanthracene) with large conjugation units (narrow energy gap) and a unique rhombus topology is introduced as the cathode material for sodium-ion batteries (SIBs). Notably, Cu-TBA with a rhombus topology exhibits a high specific surface area (613 m2 g-1) and metallic band structure. Additionally, Cu-TBA outperforms its hexagonal counterpart, Cu-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxyltriphenylene), demonstrating superior reversible capacity (153.6 mAh g-1 at 50 mA g-1) and outstanding cyclability with minimal capacity decay even after 3000 cycles at 1 A g-1. This work elucidates a new strategy to enhance the electrochemical performance of 2D c-MOFs cathode materials by narrowing the energy gap of organic linkers, effectively expanding the utilization of 2D c-MOFs for SIBs.

Direct observation of electron transfer in solids through X-ray crystallography

Nanoscale electron transfer (ET) in solids is fundamental to the design of multifunctional nanomaterials, yet its process is not fully understood. Herein, through X-ray crystallography, we directly observe solid-state ET via a crystal-to-crystal process. We first demonstrate the creation of a robust and flexible electron acceptor/acceptor (A/A) double-wall nanotube crystal ([(Zn2+)4(LA)4(LA=O)4]n) with a large window (0.90 nm × 0.92 nm) through the one-dimensional porous crystallization of heteroleptic Zn4 metallocycles ((Zn2+)4(LA)4(LA=O)4) with two different acceptor ligands (2,7-bis((1-ethyl-1H-imidazol-2-yl)ethynyl)acridine (LA) and 2,7-bis((1-ethyl-1H-imidazol-2-yl)ethynyl)acridin-9(10H)-one (LA=O)) in a slow-oxidation-associated crystallization procedure. We then achieve the bottom-up construction of the electron donor incorporated-A/A nanotube crystal ([(D)2⊂(Zn2+)4(LA)4(LA=O)4]n) through the subsequent absorption of electron donor guests (D = tetrathiafulvalene (TTF) and ferrocene (Fc)). Finally, we remove electrons from the electron donor guests inside the nanotube crystal through facile ET in the solid state to accumulate holes inside the nanotube crystal ([(D•+)2⊂(Zn2+)4(LA)4(LA=O)4]n), where the solid-state ET process (D - e- → D•+) is thus observed directly by X-ray crystallography.

Synthesis of 2-Amino-N'-aroyl(het)arylhydrazides, DNA Photocleavage, Molecular Docking and Cytotoxicity Studies against Melanoma CarB Cell Lines

Diacylhydrazine bridged anthranilic acids with aryl and heteroaryl domains have been synthesized as the open flexible scaffold of arylamide quinazolinones in order to investigate flexibility versus rigidity towards DNA photocleavage and sensitivity. Most of the compounds have been synthesized via the in situ formation of their anthraniloyl chloride and subsequent reaction with the desired hydrazide and were obtained as precipitates, in moderate yields. All compounds showed high UV-A light absorption and are eligible for DNA photocleavage studies under this "harmless" irradiation. Despite their reduced UV-B light absorption, a first screening indicated the necessity of a halogen at the p-position in relation to the amine group and the lack of an electron-withdrawing group on the aryl group. These characteristics, in general, remained under UV-A light, rendering these compounds as a novel class of UV-A-triggered DNA photocleavers. The best photocleaver, the compound 9, was active at concentrations as low as 2 μΜ. The 5-Nitro-anthranilic derivatives were inactive, giving the opposite results to their related rigid quinazolinones. Molecular docking studies with DNA showed possible interaction sites, whereas cytotoxicity experiments indicated the iodo derivative 17 as a potent cytotoxic agent and the compound 9 as a slight phototoxic compound.

Novel chalcone-based crown ethers: synthesis, characterization, antioxidant activity, biological evaluations, and wastewater remediation

Macrocycles play a pivotal and indispensable role within the realms of both medicine and industry. In the course of our research endeavors, we have successfully synthesized five distinct macrocyclic chalcone entities, each showcasing remarkable biological and anti-oxidative properties. Furthermore, these compounds exhibit exceptional promise as potent agents for the removal of dyes in wastewater treatment processes. The synthesis of these key constituents was achieved through the judicious application of the Robinson ether synthesis and Claisen-Schmidt condensation reactions. The structures of compounds 1a-f and 2a-e were characterized by using analytical techniques such as FTIR, 1H NMR, 13C NMR, and DEPT 13C NMR spectroscopy. These macrocycles also underwent in vitro assessments to measure their antibacterial activity using the agar well diffusion method. The results revealed that the macrocyclics were more sensitive to Gram-positive than Gram-negative bacteria. For example, compound 2d exhibited an inhibition zone of 20 mm at 150 ppm. The antioxidant activity as determined via the DPPH method established that all tested compounds showed moderate radical-scavenging ability. Specifically, compound 2e (at 1000 ppm) exhibited antioxidant activity of 79% inhibition of radicals, in comparison to 90% for the standard ascorbic acid. The latter was demonstrated by using methylene blue as an adsorbate under simulated wastewater conditions. Outstandingly, the most effective compounds were 2d and 2c, which achieved removal rates of 96.54% and 92.37%, respectively, for methylene blue dye.

Stepwise formation of a chemodynamic therapy agent of {Cu8} macrocyclic complex recognized by iodide ions

An atomically precise Cu(I) macrocyclic complex Cu8I was developed for chemodynamic therapy (CDT) research. The {Cu8} macrocyclic skeleton gradually forms with the selective recognition of iodide ions, and the monitoring of intermediate fragments during Cu8I formation using time-dependent electrospray ionization mass spectrometry indicates the following possible formation process: [Cu1] → [Cu2] → [Cu3] → [Cu4] → [Cu5I] → [Cu6I] → [Cu7I] → [Cu8I] when recognized by iodide ions. Furthermore, the Cu(I)-mediated Fenton-like reaction in Cu8I catalyzes the production of toxic ˙OH from H2O2, which results in efficient tumor suppression.

Bowl-Shaped Bispyrrole-Fused Perylene-diimide and Its Anions

Incorporating two pyrrole subunits at the bay positions of perylene-diimide has been a long-pursued goal since 2009, but it has not been achieved due to high strain. Herein, via one step Buchwald-Hartwig reaction, PDI-2N was successfully generated with a bowl depth of 1.52 Å. Though with electron-rich pyrrole embedding, PDI-2N's radical anion and dianion were facilely prepared and were investigated both experimentally and theoretically. Moreover, PDI-2N crystallized in different manners under distinct conditions, and it formed tubular crystals with infinite two-directional columnar stacking under DMF conditions. This finding develops a dream bowl-shaped PDI derivative that holds great promise in organoelectronics.

Coaxially Conductive Organic Wires Through Self-Assembly

Here, we describe the synthesis of the hexameric macrocyclic aniline (MA[6]), which spontaneously assembles into coaxially conductive organic wires in its oxidized and acidified emeraldine salt (ES) form. Electrical measurements reveal that ES-MA[6] exhibits high electrical conductivity (7.5 × 10^-2 S·cm^-1) and that this conductivity is acid-base responsive. Single-crystal X-ray crystallography reveals that ES-MA[6] assembles into well-defined trimeric units that then stack into nanotubes with regular channels, providing a potential route to synthetic nanotubes that are leveraged for ion or small molecule transport. Ultraviolet-visible-near-infrared absorbance spectroscopy and electron paramagnetic spectroscopy showcase the interconversion between acidic (conductive) and basic (insulating) forms of these macrocycles and how charge carriers are formed through protonation, giving rise to the experimentally observed high electrical conductivity.

A Triptycene-Based 2D MOF with Vertically Extended Structure for Improving the Electrocatalytic Performance of CO2 to Methane

Two-dimensional conductive metal-organic frameworks (2D-c-MOFs) have attracted extensive attention owing to their unique structures and physical-chemical properties. However, the planarly extended structure of 2D-c-MOFs usually limited the accessibility of the active sites. Herein, we designed a triptycene-based 2D vertically conductive MOF (2D-vc-MOF) by coordinating 2,3,6,7,14,15-hexahydroxyltriptycene (HHTC) with Cu²⁺ . The vertically extended 2D-vc-MOF(Cu) possesses a weak interlayer interaction, which leads to a facile exfoliation to the nanosheet. Compared with the classical 2D-c-MOFs with planarly extended 2D structures, 2D-vc-MOF(Cu) exhibits a 100 % increased catalytic activity in terms of turnover number and a two-fold increased selectivity. Density functional theory (DFT) calculations further revealed that higher activity originated from the lower energy barriers of the vertically extended 2D structures during the CO₂ reduction reaction process.

Cu(I)/Cu(II) Creutz-Taube Mixed-Valence 2D Coordination Polymers

Graphene-like 2D coordination polymers (GCPs) have been of central research interest in recent decades with significant impact in many fields. According to classical coordination chemistry, Cu(II) can adopt the dsp² hybridization to form square planar coordination geometry, but not Cu(I); this is why so far, there has been few 2D layered structures synthesized from Cu(I) precursors. Herein a pair of isostructural GCPs synthesized by the coordination of benzenehexathiol (BHT) ligands with Cu(I) and Cu(II) ions, respectively, is reported. Spectroscopic characterizations indicate that Cu(I) and Cu(II) coexist with a near 1:1 ratio in both GCPs but remain indistinguishable with a fractional oxidation state of +1.5 on average, making these two GCPs a unique pair of Creutz-Taube mixed-valence 2D structures. Based on density functional theory calculations, an intramolecular pseudo-redox mechanism is further uncovered whereby the radicals on BHT ligands can oxidize Cu(I) or reduce Cu(II) ions upon coordination, thus producing isostructures with distinct electron configurations. For the first time, it is demonstrated that using Cu(I) or Cu(II), one can achieve 2D isostructures, indicating an unusual fact that a neutral periodic structure can host a different number of total electrons as ground states, which may open a new chapter for 2D materials.

Dense Conductive Metal-Organic Frameworks as Robust Electrocatalysts for Biosensing

Due to the fascinating properties such as high porosity, large surface areas, and tunable chemical components, metal-organic frameworks (MOFs) have emerged in many fields including catalysis, energy storage, and gas separation. However, the intrinsic electrical insulation of MOFs severely restricts their application in electrochemistry. Here, we synthesize a series of 2D conductive MOFs (cMOFs) through tuning the structure with atomic precision using simple hydrothermal methods. Various electroactive probes are used to reveal the structure-property relationships in 2D cMOFs. Then, we demonstrate the first exploration and implementation of 2D cMOFs toward the construction of electrochemical biosensors. In particular, the biosensor based on Cu₃(tetrahydroxy-1,4-quinone)₂ [Cu₃(THQ)₂] displays a remarkably improved electrocatalytic performance at a much lower potential. The mechanism study reveals the essential role of charge-transfer interactions between the dense catalytic sites of Cu₃(THQ)₂ and analytes. Furthermore, the Cu₃(THQ)₂-based biosensor demonstrates robust anti-interference capability, good stability, fast response speed, and an ultralow detection limit for paraoxon. These promising results indicate the great potential of cMOFs in biomedical, food safety, and environmental sensing applications.

Oxidative control over the morphology of Cu3(HHTP)2, a 2D conductive metal–organic framework

The morphology of electrically conductive metal–organic frameworks strongly impacts their performance in applications such as energy storage and electrochemical sensing. However, identifying the appropriate conditions needed to achieve a specific nanocrystal size and shape can be a time-consuming, empirical process. Here we show how partial ligand oxidation dictates the morphology of Cu₃(HHTP)₂ (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene), a prototypical 2D conductive metal–organic framework. Using organic quinones as the chemical oxidant, we demonstrate that partial oxidation of the ligand prior to metal binding alters the nanocrystal aspect ratio by over 60-fold. Systematically varying the extent of initial ligand oxidation leads to distinct rod, block, and flake-like morphologies. These results represent an important advance in the rational control of Cu₃(HHTP)₂ morphology and motivate future studies into how ligand oxidation impacts the nucleation and growth of 2D conductive metal–organic frameworks.

The morphology of a copper-based 2D conductive metal–organic framework can be tuned via controlled ligand oxidation. Using quinone oxidants, we show how partial ligand oxidation prior to metal binding alters the nanocrystal aspect ratio by >60-fold.