In Situ Monitoring of Palladium-Catalyzed Chemical Reactions by Nanogap-Enhanced Raman Scattering using Single Pd Cube Dimers

Design rules for catalysis in single-particle plasmonic nanogap reactors with precisely aligned molecular monolayers

Plasmonic nanostructures can both drive and interrogate light-driven catalytic reactions. Sensitive detection of reaction pathways is achieved by confining optical fields near the active surface. However, effective control of the reaction kinetics remains a challenge to utilize nanostructure constructs as efficient chemical reactors. Here we present a nanoreactor construct exhibiting high catalytic and optical efficiencies, based on a nanoparticle-on-mirror (NPoM) platform. We observe and track pathways of the Pd-catalysed C-C coupling reaction of molecules within a set of nanogaps presenting different chemical surfaces. Atomic monolayer coatings of Pd on the different Au facets enable tuning of the reaction kinetics of surface-bound molecules. Systematic analysis shows the catalytic efficiency of NPoM-based nanoreactors greatly improves on platforms based on aggregated nanoparticles. More importantly, we show Pd monolayers on the nanoparticle or on the mirror play significantly different roles in the surface reaction kinetics. Our data provides clear evidence for catalytic dependencies on molecular configuration in well-defined nanostructures. Such nanoreactor constructs therefore yield clearer design rules for plasmonic catalysis.

Controlled Fabrication of Wafer-Scale, Flexible Ag-TiO2 Nanoparticle-Film Hybrid Surface-Enhanced Raman Scattering Substrates for Sub-Micrometer Plastics Detection

As an important trace molecular detection technique, surface-enhanced Raman scattering (SERS) has been extensively investigated, while the realization of simple, low-cost, and controllable fabrication of wafer-scale, flexible SERS-active substrates remains challenging. Here, we report a facile, low-cost strategy for fabricating wafer-scale SERS substrates based on Ag-TiO2 nanoparticle-film hybrids by combining dip-coating and UV light array photo-deposition. The results show that a centimeter-scale Ag nanoparticle (AgNP) film (~20 cm × 20 cm) could be uniformly photo-deposited on both non-flexible and flexible TiO2 substrates, with a relative standard deviation in particle size of only 5.63%. The large-scale AgNP/TiO2 hybrids working as SERS substrates show high sensitivity and good uniformity at both the micron and wafer levels, as evidenced by scanning electron microscopy and Raman measurements. In situ bending and tensile experiments demonstrate that the as-prepared flexible AgNP/TiO2 SERS substrate is mechanically robust, exhibiting stable SERS activity even in a large bending state as well as after more than 200 tensile cycles. Moreover, the flexible AgNP/TiO2 SERS substrates show excellent performance in detecting sub-micrometer-sized plastics (≤1 μm) and low-concentration organic pollutants on complex surfaces. Overall, this study provides a simple path toward wafer-scale, flexible SERS substrate fabrication, which is a big step for practical applications of the SERS technique.

Aptamer-aided plasmonic nano-urchins for reporter-free surface-enhanced Raman spectroscopy analysis of cortisol

Cortisol is a vital glucocorticoid hormone reflecting stress levels and related disease processes. In this study, we report an aptamer-functionalized plasmonic nano-urchin (α-FeOOH@Au-aptamer)-aided cortisol-capturing and surface-enhanced Raman spectroscopy (SERS) analysis approach. The designed α-FeOOH@Au-aptamer exhibits a well-patterned plasma structure, which combines the good SERS enhancement ability of reduced nanogaps between the Au plasma and the hot spot-favored structure of anisotropic tips from α-FeOOH urchins, with the high affinity of the aptamer towards cortisol molecules. The α-FeOOH@Au-aptamer achieved reporter-free SERS quantification for cortisol with good sensitivity (limit of detection <0.28 μmol L-1), robust salt (1.0 mol per L NaCl) and protein (5.0 mg per mL bovine serum protein) tolerance, favorable reproducibility, as well as good reusability. We further demonstrated the good cortisol-capturing ability and SERS efficacy of the α-FeOOH@Au-aptamer profiling in the serum and urine samples. Our approach provides an alternative tool for cortisol analysis and a reference strategy for report-free SERS detection of small molecules.

Difunctional AuNPs@PVP with oxidase-like activity for SERRS detection of total antioxidant capacity

Assessing the total antioxidant capacity (TAC) of foods plays a significant role in dietary guidance and disease risk reduction. Therefore, building a simple, rapid, and sensitive sensing method for detecting TAC possesses broad application prospects. Herein, we constructed a novel nanozyme catalyzed‒surface-enhanced Raman resonance scattering (SERRS) sensing strategy for analysis of TAC based on polyvinylpyrrolidone coated gold nanoparticles (AuNPs@PVP) that was synthesized by one step reduction method. AuNPs@PVP not only served as the SERRS substrate but also possessed high oxidase activity which can catalyze 3,3',5,5'-tetramethylbenzidine (TMB) oxidation by generating hydroxyl radicals (•OH) and superoxide anion free radical (•O2-). According to the inhibiting effect of antioxidants, ascorbic acid (AA) was selected as the representative for TAC detection. The linear range and limit of detection (LOD) were determined to be 10-8‒10-5 M and 0.6 nM, respectively. More importantly, the proposed nanozyme catalyzed‒SERRS strategy has been successfully applied to the detection of TAC in fruit juices, demonstrating promising potential in the field of food supervision and healthcare applications.

Nanozyme catalyzed-SERRS sensor for the recognition of dopamine based on AgNPs@PVP with oxidase-like activity

Dopamine (DA), as one of the most significant neurotransmitters, is closely related to several diseases. Achieving rapid and sensitive detection of DA remains a challenge. Herein, we proposed a simple, fast, and sensitive method for DA recognition based on surface-enhanced resonance Raman scattering (SERRS) technique. The synthesized silver nanoparticles coated with polyvinylpyrrolidone (AgNPs@PVP) with oxidase activity could not only oxidize 3,3',5,5'-tetramethylbenzidine (TMB) directly to produce a blue oxidation state TMB (oxTMB) but also could be used as the SERS substrate to generate a strong SERRS signal. When DA was added to the above system, the blue color faded along with the decrease in the SERRS signal. The change value of SERRS intensity was in proportion to the concentration of DA in the range of 0.1-10 μM with a limit of detection of 40 nM. This method presented great potential for the recognition of DA-related diseases.

Ag-Au-Cu Trimetallic Alloy Microflower: A Highly Sensitive SERS Substrate for Detection of Low Raman Scattering Cross-Section Thiols

Trimetallic Ag-Au-Cu alloy microflowers (MFs) with various surface compositions were synthesized on a glass coverslip and used as efficient surface-enhanced Raman spectroscopy (SERS) substrates for highly sensitive label-free detection of smaller Raman scattering cross-section molecules, namely, L-cysteine and toxic thiophenols. MFs of different compositions were synthesized via appropriate mixing of metal-alkyl ammonium halide precursors followed by a single-step thermolysis at 350 °C. While the Ag percentage was kept constant at 90% for all the substrates, the composition of Au and Cu was varied between 1 and 9% sequentially. The synthesized MFs were thoroughly characterized by using field emission scanning electron microscopy (FE-SEM), wide-angle X-ray scattering, X-ray photoelectron spectroscopy (XPS), and X-ray fluorescence techniques. FE-SEM studies revealed that the MFs were present throughout the substrate, and the average size varied from 20 to 40 μm. XPS studies showed that the top surface of the alloy substrates was rich in either Au or Cu atoms, while Ag remained underneath. The performance of the trimetallic MFs as SERS substrates was evaluated using Rhodamine 6G as a probe molecule, which showed that the MFs with Ag-Au-Cu compositions 90-7-3 and 90-3-7 were found to be the best and of equal SERS efficiency. The SERS enhancement factor (EF) of both these MFs was found to be the same, approximately 9 × 107, when calculated using 1,2,3-benzatriazole as the probe molecule. Between the two, the trimetallic substrate with a higher Au percentage (Ag-Au-Cu as 90-7-3) was used for the sensitive SERS-based detection of thiols to exploit the strong Au-S binding interaction. By virtue of the high EF of the substrate, the inherently low Raman scattering cross-sections of the probe molecules were greatly enhanced in SERS mode. The 'limit of quantification (LOQ)' values were found to be 1 nM for aliphatic L-Cysteine and 1-0.1 pM for aromatic thiols using the trimetallic SERS sensor.

PEC-SERS Dual-Mode Detection of Foodborne Pathogens Based on Binding-Induced DNA Walker and C3N4/MXene-Au NPs Accelerator

In this paper, a photoelectrochemical (PEC)-surface-enhanced Raman scattering (SERS) dual-mode biosensor is constructed coupled with a dual-recognition binding-induced DNA walker with a carbon nitride nanosheet (C3N4)/MXene-gold nanoparticles (C/M-Au NPs) accelerator, which is reliable and capable for sensitive and accurate detection of Staphylococcus aureus (S. aureus). Initially, a photoactive heterostructure is formed by combining C3N4 and MXene via a simple electrostatic self-assembly as they possess well-matched band-edge energy levels. Subsequently, in situ growth of gold nanoparticles on the formed surface results in better PEC performance and SERS activity, because of the synergistic effects of surface plasmon resonance and Schottky barrier. Furthermore, a three-dimensional, bipedal, and dual-recognition binding-induced DNA walker is introduced with the formation of Pb2+-dependent DNAzyme. In the presence of S. aureus, a significant quantity of intermediate DNA (I-DNA) is generated, which can open the hairpin structure of Methylene Blue-tagged hairpin DNA (H-MB) on the electrode surface, thereby enabling the switch of signals for the quantitative determination of S. aureus. The constructed PEC-SERS dual-mode biosensor that can be mutually verified under one reaction effectively addresses the problem of the low detection accuracy of traditional sensors. Experimental results revealed that the effective combination of PEC and SERS is achieved for amplification detection of S. aureus with a detection range of 5-108 CFU/mL (PEC) and 10-108 CFU/mL (SERS), and a detection of limit of 0.70 CFU/mL (PEC) and 1.35 CFU/mL (SERS), respectively. Therefore, this study offers a novel and effective dual-mode sensing strategy, which has important implications for bioanalysis and health monitoring.

Unveiling the Oxygen Evolution Mechanism with FeNi (Hydr)oxide under Neutral Conditions

Large-scale solar-driven water splitting is a way to store energy, but it requires the development of practical and durable oxygen evolution reaction (OER) catalysts. The present paper aims to investigate the mechanism of the OER, local pH, high-valent metal ions, limitations, conversions, and details during the OER in the presence of FeNi foam using in situ surface-enhanced Raman spectroscopy. This research also explores the use of in situ surface-enhanced Raman spectroscopy for detecting species on foam surfaces during the OER. The acidic media around the electrode not only limit the process but also affect the phosphate ion protonation and overall catalysis effectiveness. The study proposes that FeNi hydroxides serve as true catalysts for OER under neutral conditions, rather than FeNi phosphates. However, phosphate species remain crucial for proton transfer and water molecule adsorption. Changes observed in pH at the open-circuit potential suggest new insights concerning the coordination of Ni(II) to phosphate ions under certain conditions. By extrapolating the Tafel plot, the overpotential for the onset of OER was determined to be 470 mV. Furthermore, the overpotentials for current densities of 1 and 5 mA/cm2 were 590 and 790 mV, respectively. These findings offer valuable insights into the advancement of the OER catalysts and our understanding of the underlying mechanism for efficient water splitting; both are crucial elements for the purpose of energy storage.

Combining surface-accessible Ag and Au colloidal nanomaterials with SERS for in situ analysis of molecule-metal interactions in complex solution environments

The interactions between molecules and noble metal nanosurfaces play a central role in many areas of nanotechnology. The surface chemistry of noble metal surfaces under ideal, clean conditions has been extensively studied; however, clean conditions are seldom met in real-world applications. We developed a sensitive and robust characterization technique for probing the surface chemistry of nanomaterials in the complex environments that are directly relevant to their applications. Surface-enhanced Raman spectroscopy (SERS) can be used to probe the interaction of plasmonic nanoparticles with light to enhance the Raman signals of molecules near the surface of nanoparticles. Here, we explain how to couple SERS with surface-accessible plasmonic-enhancing substrates, which are capped with weakly adsorbing capping ligands such as citrate and chloride ions, to allow molecule-metal interactions to be probed in situ and in real time, thus providing information on the surface orientation and the formation and breaking of chemical bonds. The procedure covers the synthesis and characterization of surface-accessible colloids, the preliminary SERS screening with agglomerated colloids, the synthesis and characterization of interfacial nanoparticle assemblies, termed metal liquid-like films, and the in situ biphasic SERS analysis with metal liquid-like films. The applications of the approach are illustrated using two examples: the probing of π-metal interactions and that of target/ligand-particle interactions on hollow bimetallic nanostars. This protocol, from the initial synthesis of the surface-accessible plasmonic nanoparticles to the final in situ biphasic SERS analysis, requires ~14 h and is ideally suited to users with basic knowledge in performing Raman spectroscopy and wet synthesis of metal nanoparticles.

Quantitative detection of purine from food products with different water activities using needle-based surface-enhanced Raman scattering sensors

Typically, for accurate quantitative tests of molecules, considering the actual solute concentration in the environment with different water activities (Aws) is essential. Accordingly, for effective detection of food substances, this paper proposes a non-destructive pluggable sensor to capture and monitor four free purines based on surface-enhanced Raman scattering characteristics such as sensitivity, uniformity, repeatability, and stability. In particular, we investigate the impact of Aw on the evaluation of purine detection and its deviation corrections. Furthermore, the recoveries of purine from three food products, including fish (Aw: 0.99), ham (Aw: 0.91), and bacon (Aw: 0.73), are subsequently explored to validate the reliability of the proposed method. The results indicate that the proposed non-destructive pluggable sensor performs better when the Aw is considered. Therefore, this strategy for achieving more reliable quantitative detection by rectifying deviations based on the Aw can significantly help monitor food quality.

Material design, development, and trend for surface-enhanced Raman scattering substrates

Surface-enhanced Raman scattering (SERS) is a powerful and non-invasive spectroscopic technique that can provide rich and specific chemical fingerprint information for various target molecules through effective SERS substrates. In view of the strong dependence of the SERS signals on the properties of the SERS substrates, design, exploration, and construction of novel SERS-active nanomaterials with low cost and excellent performance as the SERS substrates have always been the foundation and the top priority for the development and application of the SERS technology. This review specifically focuses on the extensive progress made in the SERS-active nanomaterials and their enhancement mechanism since the first discovery of SERS on the nanostructured plasmonic metal substrates. The design principles, unique functions, and influencing factors on the SERS signals of different types of SERS-active nanomaterials are highlighted, and insight into their future challenge and development trends is also suggested. It is highly expected that this review could benefit a complete understanding of the research status of the SERS-active nanomaterials and arouse the research enthusiasm for them, leading to further development and wider application of the SERS technology.

Direct S-H Evidence Revealing the Photo-electrocatalytic Hydrogen Evolution Reaction Mechanism on CdS Using Surface-Enhanced Raman Spectroscopy

Photoelectrocatalytic water splitting using metal sulfides is a promising method for green hydrogen production. However, in situ probing of the hydrogen evolution reaction (HER) on sulfides with excellent performance remains a challenge. Here, we construct Au@CdS core-shell nanoparticles to study the HER on CdS, a typical HER catalyst, by surface-enhanced Raman spectroscopy (SERS) using a "borrowing" strategy. We directly capture the spectroscopic evidence of S-H intermediate under HER condition, further verified by isotopic experiments. Moreover, the population of S-H intermediates is improved by injecting charge carriers through light illumination and the S-H bond is weakened by introducing Pt to form a Au@Pt@CdS structure to change the interfacial electronic structure, both of them resulting in significant HER performance improvement. These findings can deepen the understanding of the HER mechanism and offer strategies for designing of cost-effective HER catalyst with high performance.

Active Site Engineering on Plasmonic Nanostructures for Efficient Photocatalysis

Plasmonic nanostructures have shown immense potential in photocatalysis because of their distinct photochemical properties associated with tunable photoresponses and strong light-matter interactions. The introduction of highly active sites is essential to fully exploit the potential of plasmonic nanostructures in photocatalysis, considering the inferior intrinsic activities of typical plasmonic metals. This review focuses on active site-engineered plasmonic nanostructures with enhanced photocatalytic performance, wherein the active sites are classified into four types (i.e., metallic sites, defect sites, ligand-grafted sites, and interface sites). The synergy between active sites and plasmonic nanostructures in photocatalysis is discussed in detail after briefly introducing the material synthesis and characterization methods. Active sites can promote the coupling of solar energy harvested by plasmonic metal to catalytic reactions in the form of local electromagnetic fields, hot carriers, and photothermal heating. Moreover, efficient energy coupling potentially regulates the reaction pathway by facilitating the excited state formation of reactants, changing the status of active sites, and creating additional active sites using photoexcited plasmonic metals. Afterward, the application of active site-engineered plasmonic nanostructures in emerging photocatalytic reactions is summarized. Finally, a summary and perspective of the existing challenges and future opportunities are presented. This review aims to deliver some insights into plasmonic photocatalysis from the perspective of active sites, expediting the discovery of high-performance plasmonic photocatalysts.

Particle Size-Dependent Onset of the Tunneling Regime in Ideal Dimers of Gold Nanospheres

We report on the nanoparticle-size-dependent onset of quantum tunneling of electrons across the subnanometer gaps in three different sizes (30, 50, and 80 nm) of highly uniform gold nanosphere (AuNS) dimers. For precision plasmonics, the gap distance is systematically controlled at the level of single C-C bonds via a series of alkanedithiol linkers (C₂-C₁₆). Parallax-corrected high-resolution transmission electron microscope (HRTEM) imaging and subsequent tomographic reconstruction are employed to resolve the nm to subnm interparticle gap distances in AuNS dimers. Single-particle scattering experiments on three different sizes of AuNS dimers reveal that for the larger dimers the onset of quantum tunneling regime occurs at larger gap distances: 0.96 ± 0.04 nm (C₆) for 80 nm, 0.83 ± 0.03 nm (C₅) for 50 nm, and 0.72 ± 0.02 nm (C₄) for 30 nm dimers. 2D nonlocal and quantum-corrected model (QCM) calculations qualitatively explain the physical origin for this experimental observation: the lower curvature of the larger particles leads to a higher tunneling current due to a larger effective conductivity volume in the gap. Our results have possible implications in scenarios where precise geometrical control over plasmonic properties is crucial such as in hybrid (molecule-metal) and/or quantum plasmonic devices. More importantly, this study constitutes the closest experimental results to the theory for a 3D sphere dimer system and offers a reference data set for comparison with theory/simulations.