Largely Pseudocapacitive Two-Dimensional Conjugated Metal-Organic Framework Anodes with Lowest Unoccupied Molecular Orbital Localized in Nickel-bis(dithiolene) Linkages

Porous crystalline conjugated macrocyclic materials and their energy storage applications

Porous crystalline conjugated macrocyclic materials (CMMs) possess high porosity, tunable structure/function and efficient charge transport ability owing to their planar macrocyclic conjugated π-electron system, which make them promising candidates for applications in energy storage. In this review, we thoroughly summarize the timely development of porous crystalline CMMs in energy storage related fields. Specifically, we summarize and discuss their structures and properties. In addition, their energy storage applications, such as lithium ion batteries, lithium sulfur batteries, sodium ion batteries, potassium ion batteries, Li-CO2 batteries, Li-O2 batteries, Zn-air batteries, supercapacitors and triboelectric nanogenerators, are also discussed. Finally, we present the existing challenges and future prospects. We hope this review will inspire the development of advanced energy storage materials based on porous crystalline CMMs.

Efficient Lead Removal by Assembly of Bio-Derived Ellagate Framework, Which Enables Electrocatalytic Reduction of CO2 to Formate

Lead (Pb) poisoning and CO2-induced global warming represent two exemplary environmental and energy issues threatening humanity. Various biomass-derived materials are reported to take up Pb and convert CO2 electrochemically into low-valent carbon species, but these works address the problems separately rather than settle the issues simultaneously. In this work, cheap, natural ellagic acid (EA) extracted from common plants is adopted to assemble a stable metal-organic framework (MOF), EA-Pb, by effective capture of Pb2+ ions in an aqueous medium (removal rate close to 99%). EA-Pb represents the first structurally well-defined Pb-based MOF showing selective electrocatalytic CO2-to-HCOO- conversion with Faradaic efficiency (FE) of 95.37% at -1.08 V versus RHE. The catalytic mechanism is studied by 13CO2 labeling, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), and theoretical calculation. The use of EA-Pb as an electrocatalyst for CO2 reduction represents a 2-in-1 solution of converting detrimental wastes (Pb2+) as well as natural resources (EA) into wealth (electrocatalytic EA-Pb) for addressing the global warming issue.

2D metal-organic frameworks bearing butterfly-shaped metal-bis(dithiolene) linkers from dithiol-functionalized benzenedicarboxylic acid

An assembly between 1,4-dicarboxylbenzene-2,3-dithiol (H2dcbdt) and different transition metal ions successfully produced 2D metal-organic frameworks (M-dcbdt, M = Ni, Co or Fe) composed of unprecedented butterfly-shaped metal-bis(dithiolene) (MS4) linkers in one-pot fashion. Such strategy provides easier access to the [MS4]-rich network and lowers the prerequisite to explore their applications.

Arresting dissolution of two-dimensional metal-organic frameworks enables long life in electrochemical devices

Two-dimensional conjugated metal-organic frameworks (2D cMOFs) are emerging as promising materials for electrochemical energy storage (EES). Despite considerable interest, an understanding of their electrochemical stability and the factors contributing to their degradation during cycling is largely lacking. Here we investigate three Cu-based MOFs and report that the dissolution of 2D cMOFs into electrolytes is a prevalent and significant degradation pathway. Several factors, such as the inherent solubility of ligands in electrolyte solvents and the duration of charge-discharge cycling exert a strong influence on the dissolution process. When these factors combine within a MOF, severely limited cycling stability is observed, with dissolution accounting for up to 80% of capacity degradation. Conversely, excellent cycling stability is observed when testing a Cu-MOF with a sparingly soluble ligand within an optimized potential window. Overall, these findings represent essential insights into the electrochemical stability of 2D cMOFs, offering crucial guidelines for their targeted development in EES applications.

A new attempt to remove toluene using nickel-iron bimetallic particle electrode reactor

A new attempt of removing toluene waste gas using a three-dimensional electrode reaction device with nickel-iron bimetallic particle electrode is presented in this paper. The particle electrode was prepared by a simple liquid phase reduction method. Through bimetal modification, the particle electrode mass transfer rate is increased to 1.29 times, and the degradation efficiency of the reactor is increased by nearly 40%, which makes it possible to remove toluene waste gas by other electrochemical methods in addition to plasma method. The removal efficiency of the particle electrode can be stabilized at more than 80% after 5 cycles (50 h). At the same time, the relationship between independent working parameters and dependent variables is analyzed using the central composite design, and the operating parameters are optimized. Based on this study, the removal mechanism and possible degradation pathway of toluene were investigated. This study provides a supplement to the possibility and theoretical basis of new technology application for electrocatalytic oxidation removal of VOCs.

Electrochemical Capacitance Traces with Interlayer Spacing in Two-dimensional Conductive Metal-Organic Frameworks

Electrically conductive metal-organic frameworks (MOFs) are promising candidates for electrochemical capacitors (EC) for fast energy storage due to their high specific surface areas and potential for redox activity. To maximize energy density, traditional inorganic pseudocapacitors have utilized faradaic processes in addition to double-layer capacitance. Although conductive MOFs are usually comprised of redox active ligands which allow faradaic reactions upon electrochemical polarization, systematic studies providing deeper understanding of the charge storage processes and structure-function relationships have been scarce. Here, we investigate the charge storage mechanisms of a series of triazatruxene-based 2D layered conductive MOFs with variable alkyl functional groups, Ni3(HIR3-TAT)2 (TAT=triazatruxene; R=H, Et, n-Bu, n-Pent). Functionalization of the triazatruxene core allows for systematic variation of structural parameters while maintaining in-plane conjugation between ligands and metals. Specifically, R groups modulate interlayer spacing, which in turn shifts the charge storage mechanism from double-layer capacitance towards pseudocapacitance, leading to an increase in molar specific capacitance from Ni3(HIH3-TAT)2 to Ni3(HIBu3-TAT)2. Partial exfoliation of Ni3(HIBu3-TAT)2 renders redox active ligand moieties more accessible, and thus increases the dominance of faradaic processes. Our strategy of controlling charge storage mechanism through tuning the accessibility of redox-active sites may motivate further design and engineering of electrode materials for EC.

De Novo Design and Facile Synthesis of Highly Crystalline 2D Conductive Metal-Organic Frameworks: A "Rotor-Stator" Strategy

Two-dimensional conductive metal-organic frameworks (2D c-MOFs), which feature high electrical conductivity and large charge carrier mobility, hold great promise in electronics and optoelectronics. Nevertheless, the limited solubility of commonly used planar ligands inevitably brings challenges in synthesis and purification and causes laborious coordination conditions for screening. Moreover, most reported 2D c-MOFs are polycrystalline powders with relatively low crystallinity and irregular morphology, hindering the unveiling of the detailed structure-function relationship. Herein, we developed a "rotor-stator" molecular design strategy to construct 2D c-MOFs using a delicately designed nonplanar biscarbazole ligand (8OH-DCB). Benefiting from the special "rotor-stator" structure of the ligand, crystals of Cu-DCB-MOF were successfully prepared, allowing for the precise determination of their crystal structure. Interestingly, the crystals of Cu-DCB-MOF can be obtained in various organic solvents, indicating excellent solvent compatibility. The versatility of the "rotor-stator" molecular design strategy was further demonstrated by another two new ligands with a "rotor-stator" structure, and afford corresponding 2D c-MOF crystals (Cu-DCBT-MOF and Cu-DCBBT-MOF). The current work presents a facile approach toward the rational design and direct construction of highly crystalline 2D c-MOFs using nonplanar ligands.

N-Doped Carbon Nanonecklaces with Encapsulated BiOCl Nanoparticles as High-Rate Anodes for Lithium-Ion Batteries

The unique two-dimensional layered structure of BiOCl makes it highly promising for energy storage applications. In this study, we successfully synthesized BiOCl nanoparticles encapsulated in N-doped carbon nanonecklaces (BiOCl NPs/N-CNNs) using well-established electrospinning and solvothermal substitution. As an anode material for lithium-ion batteries, BiOCl NPs/N-CNNs exhibited enhanced rate performance, delivering a capacity of 220.2 mA h g-1 at 8 A g-1. Furthermore, it demonstrated remarkable long cycle stability, retaining a capacity of 200.5 mA h g-1 after 9000 cycles with a discharge rate of 8.0 A g-1. The superior electrochemical performance can be attributed to the stacked layered structure of BiOCl, facilitated by van der Waals force, as well as the ingenious nanonecklace structures. These structures not only provide fast ion diffusion pathways but also enhance electrolyte penetration and offer more active sites for Li+ insertion and extraction. Additionally, the nanonecklace structure prevents the aggregation of nanopolyhedra, promoting the complete reaction of BiOCl with Li+. Moreover, the unique nanopolyhedron structure alleviates the stress caused by the volume expansion of Bi nanoparticles during cycling and reduces the internal resistance of the electrode.

Tuning Coordination Structures of Zn Sites Through Symmetry-Breaking Accelerates Electrocatalysis

Manipulating the coordination environment of individual active sites in a precise manner remains an important challenge in electrocatalytic reactions. Herein, inspired by theoretical predictions, a facile procedure to synthesize a series of symmetry-breaking zinc metal-organic framework (Zn-MOF) catalysts with well-defined structures is presented. Benefiting from the optimized coordination microenvironment regulated by symmetry-breaking, Zn-N2 S2 -MOF exhibits the best performance of nitrogen (N2 ) reduction reaction (NRR) with NH3 yield rate of 25.07 ± 1.57 µg h-1  cm-2 and Faradaic efficiency of 44.57 ± 2.79% compared with reported Zn-based NRR catalysts. X-ray absorption near-edge structure shows that the symmetry-breaking distorts the coordination environment and modulates the delocalized electrons around the Zn sites, which favors the formation of unpaired low-valence Znδ+ , thereby facilitating the adsorption/activation of N2 . Theoretical calculations elucidate that low-valence Znδ+ in Zn-N2 S2 -MOF can effectively lower the energy barrier of potential determining step, promoting the kinetics and boosting the NRR activity. This work highlights the relationship between the precise coordination environment of metal sites and the catalytic activity, which offers insightful guidance for rationally designing high-efficiency electrocatalysts.

Metal Ion-controlled Growth of Different Metal-Organic Framework Micro/nanostructures for Enhanced Supercapacitor Performance

We report a metal ion-modulated effective strategy to achieve different metal-organic framework (MOF) micro/nanostructures using different metal precursors like CoCl2  ⋅ 6H2 O, CoCl2  ⋅ 6H2 O and NiCl2  ⋅ 6H2 O, and NiCl2  ⋅ 6H2 O with pyridine-3,5-dicarboxylate (3,5-pdc). The structural characterizations confirm that different morphological structures, hollow microsphere, hierarchical nanoflower, and solid nanosphere are for Co-(3,5-pdc), Co0.19 Ni0.81 -(3,5-pdc), and Ni-(3,5-pdc), respectively. These different MOF micro/nanostructures correlate with the coordination ability of Co and Ni with 3,5-pdc. Benefitting from the synergistic effect of the alloying metal nodes of Co and Ni producing rapid and rich redox reactions and the hierarchical nanoflower with higher surface area enabling excellent ion kinetics, the Co0.19 Ni0.81 -(3,5-pdc) exhibits higher specific capacitance of 515 F g-1 /273 C g-1 at 0.5 A g-1 than that of Ni-(3,5-pdc) (290 F g-1 /153.7 C g-1 ) and Co-(3,5-pdc) (132 F g-1 /67 C g-1 ), good rate capability and cycling stability. Moreover, the asymmetric supercapacitor device (Co0.19 Ni0.81 -(3,5-pdc)//AC) assembled from Co0.19 Ni0.81 -(3,5-pdc) and activated carbon (AC) achieves a maximum energy density of 42.6 Wh kg-1 at a power density of 277.3 W kg-1 .

Two-Dimensional Conductive Metal-Organic Framework for Small-Molecule Sensing in Aqueous Solution

Two-dimensional (2D) conductive metal-organic frameworks (cMOFs) have emerged as powerful transducers for electrochemical sensing. However, electrochemical sensing in aqueous solutions remains at a very early stage for 2D cMOFs. Herein, the interfacial capacitances of a 2D cMOF are utilized for electrochemical sensing for the first time. Various redox-innocent compounds along with redox-active compounds in aqueous solutions are successfully detected based on the responses of two capacitance peaks at low voltages. The quantitative sensitivity to ascorbic acid is even an order of magnitude higher than the previous voltammetric method. Further investigation demonstrates that the responses are rooted in the pseudocapacitances of the 2D cMOF, i.e., the transitions among the multiple redox states of the ligands. The analytes are suggested to alert the d-p conjugation and exchange electrons with the 2D cMOF. These deep insights in response mechanisms represent an important step for promoting the application of 2D cMOFs in chemical sensing.