Synthesis, Structural Characterization, and CO2 Reactivity of a Constitutionally Analogous Series of Tricopper Mono-, Di-, and Trihydrides

Exploring Charge Redistribution at the Cu/Co6Se8 Interface

This study investigates the electronic interactions and charge redistribution at the dopant-support interface using a Cu/Co6Se8 cluster construct. Specifically, the redox cluster series [Cu3Co6Se8L6]n ([1-Cu3]n; n = 0, -1, -2, -3; L = Ph2PNTol-, Ph = phenyl, Tol = p-tolyl) spanning four distinct oxidation states is synthesized and characterized using a multitude of techniques, including multinuclear NMR, UV-vis, XANES, and X-ray crystallography. Structural investigations indicate that the clusters are isostructural and chiral, adopting a pseudo-D3 symmetry. Paramagnetic 31P NMR spectroscopy and solution-phase magnetic measurements together with DFT calculations are employed to interrogate the electronic structure and spin-state changes across the [1-Cu3]3- to 1-Cu3 redox series, revealing that the copper edge sites retain a +1 oxidation state while the Co/Se core becomes increasingly oxidized, yielding a highly zwitterionic cluster.

Lewis Acid-Tethered (cAAC)-Copper Complexes: Reactivity for Hydride Transfer and Catalytic CO2 Hydrogenation

We present a series of borane-tethered cyclic (alkyl)(amino)carbene (cAAC)-copper complexes, including a borane-capped Cu(I) hydride. This hydride is unusually hydridic and reacts rapidly with both CO2 and 2,6-dimethylphenol at room temperature. Its reactivity is distinct from variants without a tethered borane, and the underlying principles governing the enhanced hydricity were evaluated experimentally and theoretically. These stoichiometric results were extended to catalytic CO2 hydrogenation, and the borane-tethered (intramolecular) system exhibits ~3-fold enhancement relative to an intermolecular system.

High-Spin [FeI3] Cluster Capable of Pnictogen Atom Capture

Using a new hexanucleating anildophosphine ligand tBuLH3 (1,3,5-C6H9(NHC6H3-5-F-2-P(tBu)2)3), the all-monovalent [FeI3] compound (tBuL)Fe3 (1) was isolated and characterized by X-ray diffraction analysis, SQUID magnetometry, 57Fe Mössbauer spectroscopy, and cyclic voltammetry. The molecular structure of 1 reveals very close Fe-Fe distances of 2.3825(7), 2.4146(8), and 2.3913(8) Å which results in significant Fe-Fe interactions and a maximum high-spin S = 9/2 spin state as determined by SQUID magnetometry and further supported by quantum chemical calculations. Compound 1 mediates the multielectron, oxidative atom transfer from inorganic azide ([Bu4N][N3]), cyanate (Na[NCO]), and phosphonate (Na(dioxane)2.5[PCO]) to afford the [Fe3]-nitrido (N3-) and [Fe3]-phosphido (P3-) pnictides, (tBuL)Fe3(μ3-N) (2) and [(tBuL)Fe3(μ3-P)(CO)]- (3), respectively. Compounds 1-3 exhibit rich electrochemical behavior with three (for 1), four (for 2) and five (for 3) distinct redox events being observed in the cyclic voltammograms of these compounds. Finally, the all-monovalent 1 and the formally FeII/FeII/FeI compound 3, were investigated by alternating current (ac) SQUID magnetometry, revealing slow magnetic relaxation in both compounds, with 3 being found to be a unique example of a [Fe3]-phosphido single-molecule magnet having an energy barrier relaxation reversal of U = 30.7(6) cm-1 in the absence of an external magnetic field. This study demonstrates the utility of an all low-valent polynuclear cluster to perform multielectron redox chemistry and exemplifies the redox flexibility and unique physical properties that are present in the corresponding midvalent oxidation products.

Ditopic ligand effects on solution structure and redox chemistry in discrete [Cu12S6] clusters with labile Cu-S bonds

Copper chalcogenide nanoclusters (Cu-S/Se/Te NCs) are a broad and diverse class of atomically precise nanomaterials that have historically been studied for potential applications in luminescent devices and sensors, and for their beautiful, mineral-like crystal structures. By the "cluster-surface" analogy, Cu-S/Se NCs are prime candidates for the development of nanoscale multimetallic catalysts with atomic precision. However, the majority of studies conducted to date have focused exclusively on their solid-state structures and physical properties, leaving open questions as to their solution stability, dynamics, and reactivity. Herein, we report the first detailed interrogation of solution structure, dynamics, electrochemistry, and decomposition of Cu-S NCs. Specifically, we report the detailed NMR spectroscopy, diffusion-ordered spectroscopy, MALDI mass spectrometry, electrochemical and stoichiometric redox reactivity studies, and DFT studies of a series of [Cu12S6] clusters with labile Cu-S bonds supported by monodentate phosphines and ditopic bis(diphenylphosphino)alkane ligands PPh2R (R = Et, -(CH2)5-, -(CH2)8-). We find that the ligand binding topology dictates the extent of speciation in solution, with complete stability being afforded by the longer octane chelate in dppo (1,8-bis(diphenylphosphino)octane) according to 1H and DOSY NMR and MALDI-MS studies. Furthermore, a combined electrochemical and computational investigation of [Cu12S6(dppo)4] reveals that the intact [Cu12S6] core undergoes a quasireversible one-electron oxidation at mild applied potentials ([Cu12S6]0/+: -0.50 V vs. Fc0/+). In contrast, prolonged air exposure or treatment with chemical oxidants results in cluster degradation with S atom extrusion as phosphine sulfide byproducts. This work adds critical new dimensions to the stabilization and study of atomically precise metal chalcogenide NCs with labile M-S/Se bonds, and demonstrates both progress and challenges in controlling the solution behaviour and redox chemistry of phosphine-supported copper chalcogenide nanoclusters.

Cu site differentiation in tetracopper(i) sulfide clusters enables biomimetic N2O reduction

Copper clusters feature prominently in both metalloenzymes and synthetic nanoclusters that mediate catalytic redox transformations of gaseous small molecules. Such reactions are critical to biological energy conversion and are expected to be crucial parts of renewable energy economies. However, the precise roles of individual metal atoms within clusters are difficult to elucidate, particularly for cluster systems that are dynamic under operating conditions. Here, we present a metal site-specific analysis of synthetic Cu4(μ4-S) clusters that mimic the Cu Z active site of the nitrous oxide reductase enzyme. Leveraging the ability to obtain structural snapshots of both inactive and active forms of the synthetic model system, we analyzed both states using resonant X-ray diffraction anomalous fine structure (DAFS), a technique that enables X-ray absorption profiles of individual metal sites within a cluster to be extracted independently. Using DAFS, we found that a change in cluster geometry between the inactive and active states is correlated to Cu site differentiation that is presumably required for efficient activation of N2O gas. More precisely, we hypothesize that the Cu δ+⋯Cu δ- pairs produced upon site differentiation are poised for N2O activation, as supported by computational modeling. These results provide an unprecedented level of detail on the roles of individual metal sites within the synthetic cluster system and how those roles interplay with cluster geometry to impact the reactivity function. We expect this fundamental knowledge to inform understanding of metal clusters in settings ranging from (bio)molecular to nanocluster to extended solid systems involved in energy conversion.

Combining Donor Strength and Oxidative Stability in Scorpionates: A Strongly Donating Fluorinated Mesoionic Tris(imidazol-5-ylidene)borate Ligand

Strongly donating scorpionate ligands support the study of high-valent transition metal chemistry; however, their use is frequently limited by oxidative degradation. To address this concern, we report the synthesis of a tris(imidazol-5-ylidene)borate ligand featuring trifluoromethyl groups surrounding its coordination pocket. This ligand represents the first example of a chelating poly(imidazol-5-ylidene) mesoionic carbene ligand, a scaffold that is expected to be extremely donating. The {NiNO}10 complex of this ligand, as well as that of a previously reported strongly donating tris(imidazol-2-ylidene)borate, has been synthesized and characterized. This new ligand's strong donor properties, as measured by the υNO of its {NiNO}10 complex and natural bonding orbital second-order perturbative energy analysis, are at par with those of the well-studied alkyl-substituted tris(imidazol-2-ylidene)borates, which are known to effectively stabilize high-valent intermediates. The good donor properties of this ligand, despite the electron-withdrawing trifluoromethyl substituents, arise from the strongly donating imidazol-5-ylidene mesoionic carbene arms. These donor properties, when combined with the robustness of trifluoromethyl groups toward oxidative decomposition, suggest this ligand scaffold will be a useful platform in the study of oxidizing high-valent transition-metal species.

Accessing Ta/Cu Architectures via Metal-Metal Salt Metatheses: Heterobimetallic C-H Bond Activation Affords μ-Hydrides

We employ a metal-metal salt metathesis strategy to access low-valent tantalum-copper heterometallic architectures (Ta-μ2 -H2 -Cu and Ta-μ3 -H2 -Cu3 ) that emulate structural elements proposed for surface alloyed nanomaterials. Whereas cluster assembly with carbonylmetalates is well precedented, the use of the corresponding polyarene transition metal anions is underexplored, despite recognition of these highly reactive fragments as storable sources of atomic Mn- . Our application of this strategy provides structurally unique early-late bimetallic species. These complexes incorporate bridging hydride ligands during their syntheses, the origin of which is elucidated via detailed isotopic labelling studies. Modification of ancillary ligand sterics and electronics alters the mechanism of bimetallic assembly; a trinuclear complex resulting from dinuclear C-H activation is demonstrated as an intermediate en route to formation of the bimetallic. Further validating the promise of this rational, bottom-up approach, a unique tetranuclear species was synthesized, featuring a Ta centre bearing three Ta-Cu interactions.

Entropy engineering of La-based perovskite for simultaneous photocatalytic CO2 reduction and biomass oxidation

Herein, the high-entropy perovskite, i.e. La(FeCoNiCrMn)O3, was prepared for simultaneous CO2 reduction and biomass upgrading. Based on the synergistic effect between the elements in the high-entropy material, an excellent CO evolution rate of 131.8 μmol g-1 h-1 and a xylonic acid yield of 63.9% were gained.

Trapping of soluble, KCl-stabilized Cu(I) hydrides with CO2 gives crystalline formates

Cu(I)-Hydrido complexes supported by dibenzo[b,f]azepinyl P-alkene hybrid ligands and stabilized by electrostatic interactions in a Cu-H⋯KCl⋯BR3 arrangement can be trapped with CO2 at low temperature to afford Cu(I)-formates. The complexes are isolable with and without a pendant BEt3 group and show strong Cu-O and weak B-O interactions.