Identifying Adsorbed OH Species on Pt and Ru Electrodes with Surface-Enhanced Infrared Absorption Spectroscopy through CO Displacement

Simultaneously Promoted Water Resistance and CO2 Selectivity in Methanol Oxidation Over Pd/CoOOH: Synergy of Co-OH and the Pd-Olatt-Co Interface

Catalytic purification of industrial oxygenated volatile organic compounds (OVOCs) is hindered by the presence of water vapor that attacks the active sites of conventional noble metal-based catalysts and the insufficient mineralization that leads to the generation of hazardous intermediates. Developing catalysts simultaneously with excellent water resistance and a high intermediate suppression ability is still a great challenge. Herein, we proposed a simple strategy to synthesize a Pd/CoOOH catalyst that contains abundant hydroxyl groups and lattice oxygen species, over which a negligible effect was observed on CH3OH conversion with 3 vol % water vapor, while a remarkable conversion reduction of 24% was observed over Pd/Co3O4. Moreover, the low-temperature CO2 selectivity over Pd/CoOOH is significantly enhanced in comparison with Pd/Co(OH)2. The high concentration of surface hydroxyl groups on Pd/CoOOH enhances the water resistance owing to the accelerated activation of H2O to generate Co-OH, which replaces the consumed hydroxyl and facilitates the quick dissociation of surface H2O through timely desorption. Additionally, the presence of Pd-Olatt-Co promotes electron transport from Co to Pd, leading to improved metal-support interactions and weakened metal-O bonds. This in turn enhances the catalyst's capacity to efficaciously convert intermediates. This study sheds new insights into designing multifunctional catalytic platforms for efficient industrial OVOC purification as well as other heterogeneous oxidation reactions.

Concerted Influence of H2O and CO2: Moisture Exposure of Sulfide Solid Electrolyte Li4SnS4

Although moisture-induced deterioration mechanisms in sulfide solid electrolytes to enhance atmospheric stability have been investigated, the additional impact of CO2 exposure remains unclear. This study investigated the generation of H2S from Li4SnS4 under H2O and CO2 exposure. Li4SnS4 was exposed to Ar gas at a dew point of 0 °C with and without 500 ppm of CO2, and its ion conductive properties were evaluated. Although the lithium-ion conductivity of Li4SnS4 decreased regardless of the presence of CO2, the amount of H2S generated with CO2 was five times higher. To elucidate the underlying mechanism, X-ray diffraction and Raman spectroscopy were used. Without CO2, hydrate Li4SnS4·4H2O formation markedly increased, whereas, with CO2, it increased a little. The difference revealed distinct deterioration mechanisms leading to a decrease in lithium-ion conductivity: without CO2, adsorbed H2O and Li4SnS4·4H2O contributed to the decrease, while with CO2, a weak acid dissociation reaction could reduce the thermodynamic stability of the moisture-exposed Li4SnS4 surface including Li4SnS4·4H2O and adsorbed H2O, promoting H2S release and carbonate formation. This was supported by the recovery of lithium-ion conductivity after vacuum heating. The concerted influence of H2O and CO2 provides valuable insights into the fundamental deterioration mechanisms in sulfide solid electrolytes that could be applied in battery manufacturing processes.

Atomic Layer Deposition of TiO2 on Si Window Enables In Situ ATR-SEIRAS Measurements in Strong Alkaline Electrolytes

The Si window is the most widely used internal reflection element (IRE) for electrochemical attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), yet local chemical etching on Si by concentrated OH- anions bottlenecks the reliable application of this method in strong alkaline electrolytes. In this report, atomic layer deposition of a 25 nm nonconductive TiO2 barrier layer on the reflecting plane of a Si prism is demonstrated to address this challenge. In situ ATR-SEIRAS measurement on a Au film electrode with the Si/TiO2 composite IRE in 1 M NaOH reveals reversible global spectral features without spectral distortion at 1000-1300 cm-1, in stark contrast to those obtained with a bare Si window. By applying this structured ATR-SEIRAS, ethanol electrooxidation on a Pt/C catalyst in 1 and 5 M NaOH is explored, manifesting that such high pH values prevent the adsorption of as-formed acetate in the C2 pathway but not that of CO intermediate in the C1 pathway.

Superdiffusive Rotation of Interfacial Water on Noble Metal Surface

Interfacial water on a metal surface acts as an active layer through the reorientation of water, thereby facilitating the energy transfer and chemical reaction across the metal surface in various physicochemical and industrial processes. However, how this active interfacial water collectively behaves on flat noble metal substrates remains largely unknown due to the experimental limitation in capturing librational vibrational motion of interfacial water and prohibitive computational costs at the first-principles level. Herein, by implementing a machine-learning approach to train neural network potentials, we enable performing advanced molecular dynamics simulations with ab initio accuracy at a nanosecond scale to map the distinct rotational motion of water molecules on a metal surface at room temperature. The vibrational density of states of the interfacial water with two-layer profiles reveals that the rotation and vibration of water within the strong adsorption layer on the metal surface behave as if the water molecules in the bulk ice, wherein the O-H stretching frequency is well consistent with the experimental results. Unexpectedly, the water molecules within the adjacent weak adsorption layer exhibit superdiffusive rotation, contrary to the conventional diffusive rotation of bulk water, while the vibrational motion maintains the characteristic of bulk water. The mechanism underlying this abnormal superdiffusive rotation is attributed to the translation-rotation decoupling of water, in which the translation is restrained by the strong hydrogen bonding within the bilayer interfacial water, whereas the rotation is accelerated freely by the asymmetric water environment. This superdiffusive rotation dynamics may elucidate the experimentally observed large fluctuation of the potential of zero charge on Pt and thereby the conventional Helmholtz layer model revised by including the contribution of interfacial water orientation. The surprising superdiffusive rotation of vicinal water next to noble metals will shed new light on the physicochemical processes and the activity of water molecules near metal electrodes or catalysts.

Unraveling the Mechanism of Ammonia Electrooxidation by Coupled Differential Electrochemical Mass Spectrometry and Surface-Enhanced Infrared Absorption Spectroscopic Studies

Ammonia electrooxidation has received considerable attention in recent times due to its potential application in direct ammonia fuel cells, ammonia sensors, and denitrification of wastewater. In this work, we used differential electrochemical mass spectrometry (DEMS) coupled with attenuated total reflection-surface-enhanced infrared absorption (ATR-SEIRA) spectroscopy to study adsorbed species and solution products during the electrochemical ammonia oxidation reaction (AOR) on Pt in alkaline media, and to correlate the product distribution with the surface ad-species. Hydrazine electrooxidation, hydroxylamine electrooxidation/reduction, and nitrite electroreduction on Pt have also been studied to enhance the understanding of the AOR mechanism. NH3, NH2, NH, NO, and NO2 ad-species were identified on the Pt surface with ATR-SEIRA spectroscopy, while N2, N2O, and NO were detected with DEMS as products of the AOR. N2 is formed through the coupling of two NH ad-species and then subsequent further dehydrogenation, while the dimerization of HNOad leads to the formation of N2O. The NH-NH coupling is the rate-determining step (rds) at high potentials, while the first dehydrogenation step is the rds at low potentials. These new spectroscopic results about the AOR and insights could advance the search and design of more effective AOR catalysts.

Selective Nitrate Electroreduction to Ammonia on CNT Electrodes with Controllable Interfacial Wettability

The development of electrocatalysts that can efficiently reduce nitrate (NO3-) to ammonia (NH3) has garnered increasing attention due to their potential to reduce carbon emissions and promote environmental protection. Intensive efforts have focused on catalyst development, but a thorough understanding of the effect of the microenvironment around the reactive sites of the catalyst is also crucial to maximize the performance of the electrocatalysts. This study explored an electrocatalytic system that utilized quaternary ammonium surfactants with a range of alkyl chain lengths to modify an electrode made of carbon nanotubes (CNT), with the goal of regulating interfacial wettability toward NO3- reduction. Trimethyltetradecylammonium bromide with a moderate alkyl chain length created a very hydrophobic interface, which led to a high selectivity in the production of NH3 (∼87%). Detailed mechanistic investigations that used operando Fourier-transform infrared (FTIR) spectroscopy and online differential electrochemical mass spectrometry (DEMS) revealed that the construction of a hydrophobic modified CNT played a synergistic role in suppressing a side reaction involving the generation of hydrogen, which would compete with the reduction of NO3-. This electrocatalytic system led to a favorable process for the reduction of NO3- to NH3 through a direct electron transfer pathway. Our findings underscore the significance of controlling the hydrophobic surface of electrocatalysts as an effective means to enhance electrochemical performance in aqueous media.

Monitoring SEIRAS on a Graphitic Electrode for Surface-Sensitive Electrochemistry: Real-Time Electrografting

The ubiquity of graphitic materials in electrochemistry makes it highly desirable to probe their interfacial behavior under electrochemical control. Probing the dynamics of molecules at the electrode/electrolyte interface is possible through spectroelectrochemical approaches involving surface-enhanced infrared absorption spectroscopy (SEIRAS). Usually, this technique can only be done on plasmonic metals such as gold or carbon nanoribbons, but a more convenient substrate for carbon electrochemical studies is needed. Here, we expanded the scope of SEIRAS by introducing a robust hybrid graphene-on-gold substrate, where we monitored electrografting processes occurring at the graphene/electrolyte interface. These electrodes consist of graphene deposited onto a roughened gold-sputtered internal reflection element (IRE) for attenuated total reflectance (ATR) SEIRAS. The capabilities of the graphene-gold IRE were demonstrated by successfully monitoring the electrografting of 4-amino-2,2,6,6-tetramethyl-1-piperidine N-oxyl (4-amino-TEMPO) and 4-nitrobenzene diazonium (4-NBD) in real time. These grafts were characterized using cyclic voltammetry and ATR-SEIRAS, clearly showing the 1520 and 1350 cm-1 NO2 stretches for 4-NBD and the 1240 cm-1 C-C, C-C-H, and N-Ȯ stretch for 4-amino-TEMPO. Successful grafts on graphene did not show the SEIRAS effect, while grafting on gold was not stable for TEMPO and had poorer resolution than on graphene-gold for 4-NBD, highlighting the uniqueness of our approach. The graphene-gold IRE is proficient at resolving the spectral responses of redox transformations, unambiguously demonstrating the real-time detection of surface processes on a graphitic electrode. This work provides ample future directions for real-time spectroelectrochemical investigations of carbon electrodes used for sensing, energy storage, electrocatalysis, and environmental applications.

Hydroxyl-Bonded Ru on Metallic TiN Surface Catalyzing CO2 Reduction with H2O by Infrared Light

Synchronized conversion of CO2 and H2O into hydrocarbons and oxygen via infrared-ignited photocatalysis remains a challenge. Herein, the hydroxyl-coordinated single-site Ru is anchored precisely on the metallic TiN surface by a NaBH4/NaOH reforming method to construct an infrared-responsive HO-Ru/TiN photocatalyst. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (ac-HAADF-STEM) and X-ray absorption spectroscopy (XAS) confirm the atomic distribution of the Ru species. XAS and density functional theory (DFT) calculations unveil the formation of surface HO-RuN5-Ti Lewis pair sites, which achieves efficient CO2 polarization/activation via dual coordination with the C and O atoms of CO2 on HO-Ru/TiN. Also, implanting the Ru species on the TiN surface powerfully boosts the separation and transfer of photoinduced charges. Under infrared irradiation, the HO-Ru/TiN catalyst shows a superior CO2-to-CO transformation activity coupled with H2O oxidation to release O2, and the CO2 reduction rate can further be promoted by about 3-fold under simulated sunlight. With the key reaction intermediates determined by in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and predicted by DFT simulations, a possible photoredox mechanism of the CO2 reduction system is proposed.