Mechanism of Oxidation of Ethane to Ethanol at Iron(IV)-Oxo Sites in Magnesium-Diluted Fe2(dobdc)

Light-driven C-H activation mediated by 2D transition metal dichalcogenides

C-H bond activation enables the facile synthesis of new chemicals. While C-H activation in short-chain alkanes has been widely investigated, it remains largely unexplored for long-chain organic molecules. Here, we report light-driven C-H activation in complex organic materials mediated by 2D transition metal dichalcogenides (TMDCs) and the resultant solid-state synthesis of luminescent carbon dots in a spatially-resolved fashion. We unravel the efficient H adsorption and a lowered energy barrier of C-C coupling mediated by 2D TMDCs to promote C-H activation and carbon dots synthesis. Our results shed light on 2D materials for C-H activation in organic compounds for applications in organic chemistry, environmental remediation, and photonic materials.

Anionic oxyl radical formed on CrVI-oxo anchored on the defect site of the UiO-66 node facilitates methane to methanol conversion

The direct conversion of methane to methanol has attracted increasing interest due to abundant and low-cost natural gas resources. Herein, by anchoring Cr-oxo/-oxyhydroxides on UiO-66 metal-organic frameworks, we demonstrate that reactive anionic oxyl radicals can be formed by controlling the coordination environment based on the results of density functional theory calculations. The anionic oxyl radicals produced at the completely oxidized CrVI site acted as the active species for facile methane activation. The thermodynamically stable CrVI-oxo/-oxyhydroxides with the anionic oxyl radicals catalyze the activation of the methane C-H bond through a homolytic mechanism. An analysis of the results showed that the catalytic performance of the active oxyl species correlates with the reaction energy of methane activation and H adsorption energies. Following methanol formation, N2O can regenerate the active sites on the most stable CrVI oxyhydroxides, i.e., the Cr(O)4Hf species. The present study demonstrated that the anionic oxyl radicals formed on the anchored CrVI oxyhydroxides by tuning the coordination environment enabled facile methane activation and facilitated methanol production.

Catalyst Engineering for the Selective Reduction of CO2 to CH4 : A First-Principles Study on X-MOF-74 (X=Mg, Mn, Fe, Co, Ni, Cu, Zn)

The conversion of carbon dioxide (CO2 ) into more valuable chemical compounds represents a critical objective for addressing environmental challenges and advancing sustainable energy sources. The CO2 reduction reaction (CO2 RR) holds promise for transforming CO2 into versatile feedstock materials and fuels. Leveraging first-principles methodologies provides a robust approach to evaluate catalysts and steer experimental efforts. In this study, we examine the CO2 RR process using a diverse array of representative cluster models derived from X-MOF-74 (where X encompasses Mg, Mn, Fe, Co, Ni, Cu, or Zn) through first-principles methods. Notably, our investigation highlights the Fe-MOF-74 cluster's unique attributes, including favorable CO2 binding and the lowest limiting potential of the studied clusters for converting CO2 to methane (CH4 ) at 0.32 eV. Our analysis identified critical factors driving the selective CO2 RR pathway, enabling the formation CH4 on the Fe-MOF-74 cluster. These factors involve less favorable reduction of hydrogen to H2 and strong binding affinities between the Fe open-metal site and reduction intermediates, effectively curtailing desorption processes of closed-shell intermediates such as formic acid (HCOOH), formaldehyde (CH2 O), and methanol (CH3 OH), to lead to selective CH4 formation.

Full Spectroscopic Characterization of the Molecular Oxygen-Based Methane to Methanol Conversion over Open Fe(II) Sites in a Metal-Organic Framework

Iron-based enzymes efficiently activate molecular oxygen to perform the oxidation of methane to methanol (MTM), a reaction central to the contemporary chemical industry. Conversely, a very limited number of artificial catalysts have been devised to mimic this process. Herein, we employ the MIL-100(Fe) metal-organic framework (MOF), a material that exhibits isolated Fe sites, to accomplish the MTM conversion using O2 as the oxidant under mild conditions. We apply a diverse set of advanced operando X-ray techniques to unveil how MIL-100(Fe) can act as a catalyst for direct MTM conversion. Single-phase crystallinity and stability of the MOF under reaction conditions (200 or 100 °C, CH4 + O2) are confirmed by X-ray diffraction measurements. X-ray absorption, emission, and resonant inelastic scattering measurements show that thermal treatment above 200 °C generates Fe(II) sites that interact with O2 and CH4 to produce methanol. Experimental evidence-driven density functional theory (DFT) calculations illustrate that the MTM reaction involves the oxidation of the Fe(II) sites to Fe(III) via a high-spin Fe(IV)═O intermediate. Catalyst deactivation is proposed to be caused by the escape of CH3• radicals from the relatively large MOF pore cages, ultimately resulting in the formation of hydroxylated triiron units, as proven by valence-to-core X-ray emission spectroscopy. The O2-based MTM catalytic activity of MIL-100(Fe) in the investigated conditions is demonstrated for two consecutive reaction cycles, proving the MOF potential toward active site regeneration. These findings will desirably lay the groundwork for the design of improved MOF catalysts for the MTM conversion.

Computational Discovery of Stable Metal-Organic Frameworks for Methane-to-Methanol Catalysis

The challenge of direct partial oxidation of methane to methanol has motivated the targeted search of metal-organic frameworks (MOFs) as a promising class of materials for this transformation because of their site-isolated metals with tunable ligand environments. Thousands of MOFs have been synthesized, yet relatively few have been screened for their promise in methane conversion. We developed a high-throughput virtual screening workflow that identifies MOFs from a diverse space of experimental MOFs that have not been studied for catalysis, yet are thermally stable, synthesizable, and have promising unsaturated metal sites for C-H activation via a terminal metal-oxo species. We carried out density functional theory calculations of the radical rebound mechanism for methane-to-methanol conversion on models of the secondary building units (SBUs) from 87 selected MOFs. While we showed that oxo formation favorability decreases with increasing 3d filling, consistent with prior work, previously observed scaling relations between oxo formation and hydrogen atom transfer (HAT) are disrupted by the greater diversity in our MOF set. Accordingly, we focused on Mn MOFs, which favor oxo intermediates without disfavoring HAT or leading to high methanol release energies─a key feature for methane hydroxylation activity. We identified three Mn MOFs comprising unsaturated Mn centers bound to weak-field carboxylate ligands in planar or bent geometries with promising methane-to-methanol kinetics and thermodynamics. The energetic spans of these MOFs are indicative of promising turnover frequencies for methane to methanol that warrant further experimental catalytic studies.

Protein Dynamics and Enzymatic Catalysis

This Perspective presents a review of our work and that of others in the highly controversial topic of the coupling of protein dynamics to reaction in enzymes. We have been involved in studying this topic for many years. Thus, this perspective will naturally present our own views, but it also is designed to present an overview of the variety of viewpoints of this topic, both experimental and theoretical. This is obviously a large and contentious topic.

Bimetallic Sites for Catalysis: From Binuclear Metal Sites to Bimetallic Nanoclusters and Nanoparticles

Heterogeneous bimetallic catalysts have broad applications in industrial processes, but achieving a fundamental understanding on the nature of the active sites in bimetallic catalysts at the atomic and molecular level is very challenging due to the structural complexity of the bimetallic catalysts. Comparing the structural features and the catalytic performances of different bimetallic entities will favor the formation of a unified understanding of the structure-reactivity relationships in heterogeneous bimetallic catalysts and thereby facilitate the upgrading of the current bimetallic catalysts. In this review, we will discuss the geometric and electronic structures of three representative types of bimetallic catalysts (bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles) and then summarize the synthesis methodologies and characterization techniques for different bimetallic entities, with emphasis on the recent progress made in the past decade. The catalytic applications of supported bimetallic binuclear sites, bimetallic nanoclusters, and nanoparticles for a series of important reactions are discussed. Finally, we will discuss the future research directions of catalysis based on supported bimetallic catalysts and, more generally, the prospective developments of heterogeneous catalysis in both fundamental research and practical applications.

Selective Methane Oxidation to Acetic Acid Using Molecular Oxygen over a Mono-Copper Hydroxyl Catalyst

Acetic acid is an industrially important chemical, produced mainly via carbonylation of methanol using precious metal-based homogeneous catalysts. As a low-cost feedstock, methane is commercially transformed to acetic acid via a multistep process involving energy-intensive methane steam reforming, methanol synthesis, and, subsequently, methanol carbonylation. Here, we report a direct single-step conversion of methane to acetic acid using molecular oxygen (O₂) as the oxidant under mild conditions over a mono-copper hydroxyl site confined in a porous cerium metal-organic framework (MOF), Ce-UiO-Cu(OH). The Ce-UiO MOF-supported single-site copper hydroxyl catalyst gave exceptionally high acetic acid productivity of 335 mmolg_cat^-1 in 96% selectivity with a Cu TON up to 400 at 115 °C in water. Our spectroscopic and theoretical studies and controlled experiments reveal that the conversion of methane to acetic acid occurs via oxidative carbonylation, where methane is first activated at the copper hydroxyl site via σ-bond metathesis to afford Cu-methyl species, followed by carbonylation with in situ-generated carbon monoxide and subsequent hydrolysis by water. This work may guide the rational design of heterogeneous abundant metal catalysts for the activation and conversion of methane to acetic acid and other valuable chemicals under mild and environmentally friendly reaction conditions.

Metal-Organic Frameworks for Greenhouse Gas Applications

Using petrol to supply energy for a car or burning coal to heat a building generates plenty of greenhouse gas (GHG) emissions, including carbon dioxide (CO₂ ), water vapor (H₂ O), methane (CH₄ ), nitrous oxide (N₂ O), ozone (O₃ ), fluorinated gases. These up-and-coming metal-organic frameworks (MOFs) are structurally endowed with rigid inorganic nodes and versatile organic linkers, which have been extensively used in the GHG-related applications to improve the lives and protect the environment. Porous MOF materials and their derivatives have been demonstrated to be competitive and promising candidates for GHG separation, storage and conversions as they shows facile preparation, large porosity, adjustable nanostructure, abundant topology, and tunable physicochemical property. Enormous progress has been made in GHG storage and separation intrinsically stemmed from the different interaction between guest molecule and host framework from MOF itself in the recent five years. Meanwhile, the use of porous MOF materials to transform GHG and the influence of external conditions on the adsorption performance of MOFs for GHG are also enclosed. In this review, it is also highlighted that the existing challenges and future directions are discussed and envisioned in the rational design, facile synthesis and comprehensive utilization of MOFs and their derivatives for practical applications.

Modulating the Energetics of C-H Bond Activation in Methane by Utilizing Metalated Porphyrinic Metal-Organic Frameworks

In recent years, much effort has been directed toward utilizing metal-organic frameworks (MOFs) for activating C-H bonds of light alkanes. The energy demanding steps involved in the catalytic pathway are the formation of metal-oxo species and the subsequent cleavage of the C-H bonds of alkanes. With the intention of exploring the tunability of the activation barriers involved in the catalytic pathway of methane hydroxylation, we have employed density functional theory to model metalated porphyrinic MOFs (MOF-525(M)). We find that the heavier congeners down a particular group have high exothermic oxo-formation enthalpies ΔH_O and hence are associated with low N₂O activation barriers. Independent analyses of activation barriers and structure-activity relationship leads to the conclusion that MOF-525(Ru) and MOF-525(Ir) can act as an effective catalysts for methane hydroxylation. Hence, ΔH_O has been found to act as a guide, in the first place, in choosing the optimum catalyst for methane hydroxylation from a large set of available systems.

Rational Design of Metal-Alkoxide-Functionalized Metal-Organic Frameworks for Synergistic Dual Activation of CH4 and CO2 toward Acetic Acid Synthesis

The concurrent conversion of CH₄ and CO₂ into acetic acid is an ideal route to migrate the two greenhouse gases and manufacture a high-value-added C₂ product with an atom economy of 100% but remains challenging due to the chemical inertness of both gases. By leveraging density functional theory (DFT) calculations, we report herein the computational design of metal-alkoxide-functionalized metal-organic framework (MOF) UiO-67 with well-defined dual sites that can activate CH₄ and CO₂ cooperatively to boost acetic acid synthesis. The dual sites are distributed on two adjacent functionalized organic linkers originating from the same node and feature a metal-metal distance of about 6-7 Å. Initially, a total of 13 single-site metal-alkoxide-functionalized UiO-67s (including three alkaline earth metals and 10 transition metals) are examined; then, favorable metal-alkoxides are identified and further used to design dual-site metal-alkoxide-functionalized UiO-67s for converting CH₄ and CO₂ into acetic acid. Detailed mechanistic investigation predicts that the dual-site UiO-67s functionalized with Mn-, Fe-, Co-, Ni-. and Zn-alkoxide are highly promising catalysts for this reaction. Compared to the single-site counterparts, the metal pair-site UiO-67s provide a subtle microenvironment for synergistic dual activation of CH₄ and CO₂, thus efficiently stabilizing the transition state and substantially reducing the reaction barrier for C-C coupling. The microscopic insights and design strategies in this work might advance the development of efficient MOF-based catalysts with built-in cooperative active sites toward direct acetic acid synthesis from CH₄ and CO₂.

New Strategies for Direct Methane-to-Methanol Conversion from Active Learning Exploration of 16 Million Catalysts

Despite decades of effort, no earth-abundant homogeneous catalysts have been discovered that can selectively oxidize methane to methanol. We exploit active learning to simultaneously optimize methane activation and methanol release calculated with machine learning-accelerated density functional theory in a space of 16 M candidate catalysts including novel macrocycles. By constructing macrocycles from fragments inspired by synthesized compounds, we ensure synthetic realism in our computational search. Our large-scale search reveals that low-spin Fe(II) compounds paired with strong-field (e.g., P or S-coordinating) ligands have among the best energetic tradeoffs between hydrogen atom transfer (HAT) and methanol release. This observation contrasts with prior efforts that have focused on high-spin Fe(II) with weak-field ligands. By decoupling equatorial and axial ligand effects, we determine that negatively charged axial ligands are critical for more rapid release of methanol and that higher-valency metals [i.e., M(III) vs M(II)] are likely to be rate-limited by slow methanol release. With full characterization of barrier heights, we confirm that optimizing for HAT does not lead to large oxo formation barriers. Energetic span analysis reveals designs for an intermediate-spin Mn(II) catalyst and a low-spin Fe(II) catalyst that are predicted to have good turnover frequencies. Our active learning approach to optimize two distinct reaction energies with efficient global optimization is expected to be beneficial for the search of large catalyst spaces where no prior designs have been identified and where linear scaling relationships between reaction energies or barriers may be limited or unknown.

Exploring mechanistic routes for light alkane oxidation with an iron-triazolate metal-organic framework

In this work, we computationally explore the formation and subsequent reactivity of various iron-oxo species in the iron-triazolate framework Fe₂(μ-OH)₂(bbta) (H₂bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole) for the catalytic activation of strong C-H bonds. With the direct conversion of methane to methanol as the probe reaction of interest, we use density functional theory (DFT) calculations to evaluate multiple mechanistic pathways in the presence of either N₂O or H₂O₂ oxidants. These calculations reveal that a wide range of transition metal-oxo sites - both terminal and bridging - are plausible in this family of metal-organic frameworks, making it a unique platform for comparing the electronic structure and reactivity of different proposed active site motifs. Based on the DFT calculations, we predict that Fe₂(μ-OH)₂(bbta) would exhibit a relatively low barrier for N₂O activation and energetically favorable formation of an [Fe(O)]²⁺ species that is capable of oxidizing C-H bonds. In contrast, the use of H₂O₂ as the oxidant is predicted to yield an assortment of bridging iron-oxo sites that are less reactive. We also find that abstracting oxo ligands can exhibit a complex mixture of both positive and negative spin density, which may have broader implications for relating the degree of radical character to catalytic activity. In general, we consider the coordinatively unsaturated iron sites to be promising for oxidation catalysis, and we provide several recommendations on how to further tune the catalytic properties of this family of metal-triazolate frameworks.

Interlayer Structure Manipulation of Iron Oxychloride by Potassium Cation Intercalation to Steer H2O2 Activation Pathway

Structural regulation of the active centers is often pivotal in controlling the catalytic functions, especially in iron-based oxidation systems. Here, we discovered a significantly altered catalytic oxidation pathway via a simple cation intercalation into a layered iron oxychloride (FeOCl) scaffold. Upon intercalation of FeOCl with potassium iodide (KI), a new stable phase of K⁺-intercalated FeOCl (K-FeOCl) was formed with slided layers, distorted coordination, and formed high-spin Fe(II) species compared to the pristine FeOCl precursor. This structural manipulation steers the catalytic H₂O₂ activation from a traditional Fenton-like pathway on FeOCl to a nonradical ferryl (Fe(IV)═O) pathway. Consequently, the K-FeOCl catalyst can efficiently remove various organic pollutants with almost 2 orders of magnitude faster reaction kinetics than other Fe-based materials via an oxidative coupling or polymerization pathway. A reaction-filtration coupled process based on K-FeOCl was finally demonstrated and could potentially reduce the energy consumption by almost 50%, holding great promise in sustainable pollutant removal technologies.

Light alkane oxidation over well-defined active sites in metal–organic framework materials

We review structure–catalytic property relationships for MOF materials used in the direct oxidation of light alkanes, focusing specifically on the elucidation of active site structures and probes for reaction mechanisms.

Catalytic properties of the ferryl ion in the solid state: a computational review

This review summarises the last findings in the emerging field of heterogeneous catalytic oxidation of light alkanes by ferryl species supported on solid-state systems such as the conversion of methane into methanol by FeO-MOF74.

A six-coordinate high-spin FeIVO species of cucurbit[5]uril: a highly potent catalyst for C-H hydroxylation of methane, if synthesised

DFT and ab initio DLPNO-CCSD(T) calculations predict a stable S = 2 six-coordinate Fe^IVO species with cucurbit[5]uril (CB[5]) as a ligand ([(CB[5])Fe^IVO(H₂O)]²⁺(1)). The strong oxidising capability of 1 far exceeds even that of metalloenzymes such as sMMOs in activating inert substrates such as methane, setting the stage for a new generation of biomimetic catalysts.

Computational investigations of selected enzymes from two iron and α-ketoglutarate-dependent families

DNA alkylation is used as the key epigenetic mark in eukaryotes, however, most alkylation in DNA can result in deleterious effects. Therefore, this process needs to be tightly regulated. The enzymes of the AlkB and Ten-Eleven Translocation (TET) families are members of the Fe and alpha-ketoglutarate-dependent superfamily of enzymes that are tasked with dealkylating DNA and RNA in cells. Members of these families span all species and are an integral part of transcriptional regulation. While both families catalyze oxidative dealkylation of various bases, each has specific preference for alkylated base type as well as distinct catalytic mechanisms. This perspective aims to provide an overview of computational work carried out to investigate several members of these enzyme families including AlkB, ALKB Homolog 2, ALKB Homolog 3 and Ten-Eleven Translocate 2. Insights into structural details, mutagenesis studies, reaction path analysis, electronic structure features in the active site, and substrate preferences are presented and discussed.

Beyond Radical Rebound: Methane Oxidation to Methanol Catalyzed by Iron Species in Metal-Organic Framework Nodes

Recent work has exploited the ability of metal-organic frameworks (MOFs) to isolate Fe sites that mimic the structures of sites in enzymes that catalyze selective oxidations at low temperatures, opening new pathways for the valorization of underutilized feedstocks such as methane. Questions remain as to whether the radical-rebound mechanism commonly invoked in enzymatic and homogeneous systems also applies in these rigid-framework materials, in which resisting the overoxidation of desired products is a major challenge. We demonstrate that MOFs bearing Fe(II) sites within Fe₃-μ₃-oxo nodes active for conversion of CH₄ + N₂O mixtures (368-408 K) require steps beyond the radical-rebound mechanism to protect the desired CH₃OH product. Infrared spectra and density functional theory show that CH₃OH_(g) is stabilized as Fe(III)-OCH₃ groups on the MOF via hydrogen atom transfer with Fe(III)-OH groups, eliminating water. Consequently, upon addition of a protonic zeolite in inter- and intrapellet mixtures with the MOF, we observed increases in CH₃OH selectivity with increasing ratio and proximity of zeolitic H⁺ to MOF-based Fe(II) sites, as methanol is protected within the zeolite. We infer from the data that CH₃OH_(g) is formed via the radical-rebound mechanism on Fe(II) sites but that subsequent transport and dehydration steps are required to protect CH₃OH_(g) from overoxidation. The results demonstrate that the radical-rebound mechanism commonly invoked in this chemistry is insufficient to explain the reactivity of these systems, that the selectivity-controlling steps involve both chemical and physical rate phenomena, as well as offering a strategy to mitigate overoxidation in these and similar systems.

Thermal Treatment Effect on CO and NO Adsorption on Fe(II) and Fe(III) Species in Fe3O-Based MIL-Type Metal-Organic Frameworks: A Density Functional Theory Study

The properties of metal–organic frameworks (MOFs) based on triiron oxo-centered (Fe₃O) metal nodes are often related to the efficiency of the removal of the solvent molecules and the counteranion chemisorbed on the Fe₃O unit by postsynthetic thermal treatment. Temperature, time, and the reaction environment play a significant role in modifying key features of the materials, that is, the number of open metal sites and the reduction of Fe(III) centers to Fe(II). IR spectroscopy allows the inspection of these postsynthetic modifications by using carbon monoxide (CO) and nitric oxide (NO) as probe molecules. However, the reference data sets are based on spectra recorded for iron zeolites and oxides, whose structures are different from the Fe₃O one. We used density functional theory to study how the adsorption enthalpy and the vibrational bands of CO and NO are modified upon dehydration and reduction of Fe₃O metal nodes. We obtained a set of theoretical spectra that can model the modification observed in previously reported experimental spectra. Several CO and NO bands were previously assigned to heterogeneous Fe(II) and Fe(III) sites, suggesting a large defectivity of the materials. On the basis of the calculations, we propose an alternative assignment of these bands by considering only crystallographic iron sites. These findings affect the common description of Fe₃O-based MOFs as highly defective materials. We expect these results to be of interest to the large community of scientists working on Fe(II)- and Fe(III)-based MOFs and related materials.

Thermal treatment of triiron oxo-centered (Fe₃O)-based metal−organic frameworks is a common postsynthetic method to determine the material performances in many applications: we used density functional theory methods to study how the efficacy of the treatment modifies the energetics and the vibrational bands of nitric oxide (NO) and carbon monoxide. The obtained data set is meant to be part of the characterization toolboxes aimed at the assessment of thermal treatment protocols.

Spin-Orbit Coupling Changes the Identity of the Hyper-Open-Shell Ground State of Ce+, and the Bond Dissociation Energy of CeH+ Proves to Be Challenging for Theory

Cerium (Ce) plays important roles in catalysis. Its position in the sixth period of the periodic table leads to spin-orbit coupling (SOC) and other open-shell effects that make the quantum mechanical calculation of cerium compounds challenging. In this work, we investigated the low-lying spin states of Ce⁺ and the bond energy of CeH⁺, both by multiconfigurational methods, in particular, SA-CASSCF, MC-PDFT, CASPT2, XMS-PDFT, and XMS-CASPT2, and by single-configurational methods, namely, Hartree-Fock theory and unrestricted Kohn-Sham density functional theory with 34 choices of the exchange-correlation functional. We found that only CASPT2, XMS-CASPT2, and SA-CASSCF (among the five multiconfigurational methods) and GAM, HCTH, SOGGA11, and OreLYP (among the 35 single-configuration methods) successfully predict that the SOC-free ground spin state of Ce⁺ is a doublet state, and CASPT2 and GAM give the most accurate multireference and single-reference calculations, respectively, of the excitation energy of the first SOC-free excited state for Ce⁺. We calculated that the ground doublet state of Ce⁺ is an intra-atomic hyper-open-shell state. We calculated the spin-orbit energy (E^SO) of Ce⁺ by the five multiconfigurational methods and found that E^SO calculated by CASPT2 is the closest to the experimental value. Taking advantage of the availability of an experimental D₀ for CeH⁺ as a way to provide a unique test of theory, we showed that all the multiconfigurational methods overestimate D₀ by at least 246 meV (5.7 kcal/mol), and only three functionals, namely, SOGGA, MN15, and GAM, have an error of D₀ that is less than 200 meV (5 kcal/mol).

Deterministic role of structural flexibility on catalytic activity of conductive 2D layered metal-organic frameworks

A combined quantum mechanics and classical molecular dynamics approach is used to unravel the effects of structural deformations and heterogeneity on catalytic activity of 2D π-stacked layered metal-organic frameworks. Theory predicts that the flexible nature of these materials creates a complex array of catalytically active sites for oxidative dehydrogenation of propane. Using an ensemble approach and oxygen bond formation energy, as an excellent probe, we investigate the catalytic activity down to the single active site level.

Shifting the scaling relations of single-atom catalysts for facile methane activation by tuning the coordination number

We investigate oxidative methane activation on a wide range of single transition metal atom catalysts embedded on N-doped graphene derivatives using density functional theory calculations. An inverse scaling relationship between *O formation and its hydrogen affinity is observed, consistent with a previous report. However, we find that the latter scaling line can be shifted towards a more reactive region by tuning the coordination number (CN) of the active metal sites. Specifically, we find that lowering the CN plays an important role in increasing the reactivity for methane activation via a radical-like transition state by moving the scaling lines. Thus, in the new design strategy suggested here, different from the conventional efforts focusing mainly on breaking the scaling relations, one maintains the scaling relations but moves them towards more reactive regions by controlling the coordination number of the active sites. With this design principle, we suggest several single atom catalysts with lower C-H activation barriers than some of the most active methane activation catalysts in the literature such as Cu-based zeolites.

Defects as catalytic sites for the oxygen evolution reaction in Earth-abundant MOF-74 revealed by DFT

The oxygen evolution reaction (OER) is the bottleneck of hydrogen production via water splitting and understanding electrocatalysts at atomic level becomes paramount to enhance the efficiency of this process.

Mechanistic understanding of methane-to-methanol conversion on graphene-stabilized single-atom iron centers

DFT calculations and kinetic modeling elucidate solvent effects and complex mechanisms for the room-temperature methane-to-methanol conversion on an FeN4/graphene catalyst.

MOF-74-type frameworks: tunable pore environment and functionality through metal and ligand modification

This highlight demonstrates a comprehensive overview of MOF-74-type frameworks in terms of synthetic approaches and pre- or post-synthetic modification approaches.

Unveiling the catalytic potential of the Fe(iv)oxo species for the oxidation of hydrocarbons in the solid state

We have investigated the three steps in the conversion of methane into methanol by Fe(iv)Ooxo species supported in MOF-74. We use ab initio MD and static approximations to predict the reaction barriers using enthalpy ΔH and free energy ΔG.

Deciphering the origin of million-fold reactivity observed for the open core diiron [HO-FeIII-O-FeIV[double bond, length as m-dash]O]2+ species towards C-H bond activation: role of spin-states, spin-coupling, and spin-cooperation

High-valent metal-oxo species have been characterised as key intermediates in both heme and non-heme enzymes that are found to perform efficient aliphatic hydroxylation, epoxidation, halogenation, and dehydrogenation reactions. Several biomimetic model complexes have been synthesised over the years to mimic both the structure and function of metalloenzymes. The diamond-core [Fe2(μ-O)2] is one of the celebrated models in this context as this has been proposed as the catalytically active species in soluble methane monooxygenase enzymes (sMMO), which perform the challenging chemical conversion of methane to methanol at ease. In this context, a report of open core [HO(L)FeIII-O-FeIV(O)(L)]2+ (1) gains attention as this activates C-H bonds a million-fold faster compared to the diamond-core structure and has the dual catalytic ability to perform hydroxylation as well as desaturation with organic substrates. In this study, we have employed density functional methods to probe the origin of the very high reactivity observed for this complex and also to shed light on how this complex performs efficient hydroxylation and desaturation of alkanes. By modelling fifteen possible spin-states for 1 that could potentially participate in the reaction mechanism, our calculations reveal a doublet ground state for 1 arising from antiferromagnetic coupling between the quartet FeIV centre and the sextet FeIII centre, which regulates the reactivity of this species. The unusual stabilisation of the high-spin ground state for FeIV[double bond, length as m-dash]O is due to the strong overlap of with the orbital, reducing the antibonding interactions via spin-cooperation. The electronic structure features computed for 1 are consistent with experiments offering confidence in the methodology chosen. Further, we have probed various mechanistic pathways for the C-H bond activation as well as -OH rebound/desaturation of alkanes. An extremely small barrier height computed for the first hydrogen atom abstraction by the terminal FeIV[double bond, length as m-dash]O unit was found to be responsible for the million-fold activation observed in the experiments. The barrier height computed for -OH rebound by the FeIII-OH unit is also smaller suggesting a facile hydroxylation of organic substrates by 1. A strong spin-cooperation between the two iron centres also reduces the barrier for second hydrogen atom abstraction, thus making the desaturation pathway competitive. Both the spin-state as well as spin-coupling between the two metal centres play a crucial role in dictating the reactivity for species 1. By exploring various mechanistic pathways, our study unveils the fact that the bridged μ-oxo group is a poor electrophile for both C-H activation as well for -OH rebound. As more and more evidence is gathered in recent years for the open core geometry of sMMO enzymes, the idea of enhancing the reactivity via an open-core motif has far-reaching consequences.

Adsorption of Nitrogen Dioxide in a Redox-Active Vanadium Metal-Organic Framework Material

Nitrogen dioxide (NO₂) is a toxic air pollutant, and efficient abatement technologies are important to mitigate the many associated health and environmental problems. Here, we report the reactive adsorption of NO₂ in a redox-active metal-organic framework (MOF), MFM-300(V). Adsorption of NO₂ induces the oxidation of V(III) to V(IV) centers in MFM-300(V), and this is accompanied by the reduction of adsorbed NO₂ to NO and the release of water via deprotonation of the framework hydroxyl groups, as confirmed by synchrotron X-ray diffraction and various experimental techniques. The efficient packing of {NO₂·N₂O₄}_∞ chains in the pores of MFM-300(V^IV) results in a high isothermal NO₂ uptake of 13.0 mmol g^-1 at 298 K and 1.0 bar and is retained for multiple adsorption-desorption cycles. This work will inspire the design of redox-active sorbents that exhibit reductive adsorption of NO₂ for the elimination of air pollutants.

Dehydrogenation of ethanol to acetaldehyde with nitrous oxide over the metal-organic framework NU-1000: a density functional theory study

The conversion of ethanol to more valuable hydrocarbon compounds receives great attention in chemical industries because it could diminish the dependency on petroleum as raw material. We investigate the catalytic performance of Fe-supported MOF NU-1000 for the dehydrogenation of ethanol to acetaldehyde with nitrous oxide (N2O) by deriving the relevant reaction profiles with density functional theory calculations. In the proposed mechanism, the activation barrier of the rate-determining step is almost four times lower in the presence of N2O than without it. The supported NU-1000 framework plays also important role since it facilitates electron transfers and stabilizes all species along the reaction coordinate. When considering the catalytic activity of tetravalent metal centers (Zr, Hf and Ti) substituted into NU-1000 it is found that their activity decreases in the order Hf ≥ Zr > Ti, based on activation energies and turnover frequencies (TOF). Concerning MOF linkers, we show that the catalytic activity is not further improved by functionalizing NU-1000 with either electron-donating or electron-withdrawing organic groups.

Reverse shape selectivity of hexane isomer in ligand inserted MOF-74

Separation of linear, mono-branched, and di-branched isomers is critically important in the petrochemical industry. In this computational study, we demonstrate that the ligand inserted Mg-MOF-74 structure leads to a reverse selectivity effect (i.e. phenomenon that preferentially allows larger species molecules to permeate in a gas mixture) of hexane isomers in the resulting material. Molecular dynamics simulations suggest that strong confinement of the di-branched hydrocarbons in the small pores lead to reverse selectivity. Over a magnitude difference in diffusivity between linear alkanes and their di-branched isomers was observed, clearly showing the steric effects imposed by the pore structure.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.