Catalyst-Dependent Stereodivergent and Regioselective Synthesis of Indole-Fused Heterocycles through Formal Cycloadditions of Indolyl-Allenes

Recent development in the synthesis of imidazo[1,5-a]indole derivatives: an in-depth overview

In the realm of nitrogen-fused heterocycles, imidazo[1,5-a]indole and its derivatives are recognized as privileged structural patterns in various pharmaceutical drugs and biologically active natural products, emphasizing their significance. This review comprehensively explores the synthetic strategies for constructing imidazo[1,5-a]indole scaffolds, with a particular focus on transition metal-catalyzed methodologies. The primary highlighted method is [4 + 1] annulation, along with other notable approaches such as C-H activation/cyclization, enantioselective C-H annulation, intramolecular hydroamination, and double cyclization processes.

Efficient assembly and anti-tumor evaluation of novel polycyclic [1,2-a]-fused indoles

Structurally diverse cyclopenta[4,5]pyrrolo[1,2-a]indoles heterocycles were smoothly constructed in good to excellent yields (up to 99 %) with excellent diastereoselectivities (>19:1 dr) through a novel and facile strategy based on BF3-catalyzed Friedel-Crafts alkylation/Aldol/Dehydrative cyclization cascade reaction. The anti-proliferative activity of these newly synthesized polycyclic indoles was screened, and all the functionalized reductive derivatives exhibited favorable anti-tumor activity. Notably, compound 4ae displayed the remarkable inhibitory activity against MCF-7 and HeLa cells with IC50 values of 4.62 μM and 7.71 μM, respectively. Mechanistically, the representative compound 4ae could effectively induce apoptosis of MCF-7 cells in crediting to up-regulate the relative expression of apoptotic protein BAX/Bcl-2, subsequently activate Pro-caspase 9 and cleave PARP, simultaneously block the cell cycle through down- and up-regulate the expression of cyclin B1 and p53, respectively. Moreover, compound 4ae also exhibited promising antineoplastic efficacy in subcutaneous MCF-7 xenograft mice which manifest significant shrunken tumors conspicuous nuclear apoptotic signal and minimal systemic toxicity. This strategy not only established a novel and efficient method for the assembly of structurally complex indole heterocycles, but also provided a series of compounds possessing attractive anti-cancer activity, which holds immense potential for future biomedical applications.

Nickel(II)-Catalyzed Formal [3+2] Cycloadditions between Indoles and Donor-Acceptor Cyclopropanes

This article describes the development of a nickel-catalyzed regio- and diastereoselective formal [3+2] cycloaddition between N-substituted indoles and donor-acceptor cyclopropanes to synthesize cyclopenta[b]indoles. Optimized reaction conditions provide the desired nitrogen-containing cycloadducts in up to 93% yield and dr 8.6:1 with complete regioselectivity. The substrate scope showed high tolerance to various substituted indoles and cyclopropanes, resulting in the synthesis of six new cyclopenta[b]indoles and the isolation of five derivatives previously reported in the literature. In addition, a mechanistic proposal for the reaction was studied through online reaction monitoring by ESI-MS, allowing for the identification of the reactive intermediates in the Ni(II) catalyzed process. X-ray crystallography confirmed the structure and relative endo stereochemistry of the products. This method enables the fast and efficient construction of fused indolines from readily accessible starting materials.

Pd-Catalyzed Intramolecular Dearomative [4 + 2] Cycloaddition of Naphthalenes with Arylalkynes

A Pd-catalyzed intramolecular dearomative [4 + 2] cycloaddition reaction of naphthalenes with arylalkynes is developed. The protocol provides a straightforward method to access a range of polycyclic dihydronaphthalenes containing two vicinal all-carbon stereocenters in moderate yields under mild conditions in an air atmosphere. The deuterium labeling experiment suggests a pathway involving electrophilic dearomatization followed by Friedel-Crafts cyclization. Several synthetic transformations of the product were conducted to demonstrate the utility of this reaction.

Broadening the catalytic region from the cavity to windows by M6L12 nanospheres in cyclizations

Supramolecular cages have received tremendous attention as they can contain catalysts that exhibit confinement effects in the cavity, leading to excellent performances. Herein, we report an example wherein the catalytic region is extended from the cage cavity to the windows, and investigate its confinement effect by utilizing the Pd6LAu12 cage that contains rigidly fixed and isolated gold complexes at the windows. Pd6LAu12 exhibit three features of particular interest while assessing their properties in gold-catalyzed cyclization reactions. First, the catalysts experience a cage effect as they display higher reactivity and selectivity compared to the monomeric analogue, as a result of substrate pre-organization at the windows. Second, the metal complexes are physically separated by the cage structure, preventing the formation of less active dinuclear gold complexes making it more stable under hydrous conditions. Third, the cage windows present the characteristics of enzymatic catalysis via Michaelis-Menten-type mechanism analysis. This contribution presents an alternative way to engineer supramolecular catalysts through extending the catalytic region.

Modulation of metal species as control point for Ni-catalyzed stereodivergent semihydrogenation of alkynes with water

A base-assisted metal species modulation mechanism enables Ni-catalyzed stereodivergent transfer semihydrogenation of alkynes with water, delivering both olefinic isomers smoothly using cheap and nontoxic catalysts and additives. Different from most precedents, in which E-alkenes derive from the isomerization of Z-alkene products, the isomers were formed in orthogonal catalytic pathways. Mechanistic studies suggest base as a key early element in modulation of the reaction pathways: by adding different bases, nickel species with disparate valence states could be accessed to initiate two catalytic cycles toward different stereoisomers. The practicability of the method is showcased with nearly 70 examples, including internal and terminal triple bonds, enynes and diynes, affording semi-hydrogenated products in high yields and selectivity.

Unveiling the Chemistry and Synthetic Potential of Catalytic Cycloaddition Reaction of Allenes: A Review

Allenes with two carbon-carbon double bonds belong to a unique class of unsaturated hydrocarbons. The central carbon atom of allene is sp hybridized and forms two σ-bonds and two π-bonds with two terminal sp² hybridized carbon atoms. The chemistry of allenes has been well documented over the last decades. They are more reactive than alkenes due to higher strain and exhibit significant axial chirality, thus playing a vital role in asymmetric synthesis. Over a variety of organic transformations, allenes specifically undergo classical metal catalyzed cycloaddition reactions to obtain chemo-, regio- and stereoselective cycloadducts. This review briefly describes different types of annulations including [2+2], [2+2+1], [3+2], [2+2+2], [4+2], [5+2], [6+2] cycloadditions using titanium, cobalt, rhodium, nickel, palladium, platinum, gold and phosphine catalyzed reactions along with a mechanistic study of some highlighted protocols. The synthetic applications of these reactions towards the synthesis of natural products such as aristeromycin, ent-[3]-ladderanol, waihoensene(-)-vindoline and (+)-4-epi-vindoline have also been described.

Triflamides and Triflimides: Synthesis and Applications

Among the variety of sulfonamides, triflamides (CF3SO2NHR, TfNHR) occupy a special position in organic chemistry. Triflamides are widely used as reagents, efficient catalysts or additives in numerous reactions. The reasons for the widespread use of these compounds are their high NH-acidity, lipophilicity, catalytic activity and specific chemical properties. Their strong electron-withdrawing properties and low nucleophilicity, combined with their high NH-acidity, makes it possible to use triflamides in a vast variety of organic reactions. This review is devoted to the synthesis and use of N-trifluoromethanesulfonyl derivatives in organic chemistry, medicine, biochemistry, catalysis and agriculture. Part of the work is a review of areas and examples of the use of bis(trifluoromethanesulfonyl)imide (triflimide, (CF3SO2)2NH, Tf2NH). Being one of the strongest NH-acids, triflimide, and especially its salts, are widely used as catalysts in cycloaddition reactions, Friedel-Crafts reactions, condensation reactions, heterocyclization and many others. Triflamides act as a source of nitrogen in C-amination (sulfonamidation) reactions, the products of which are useful building blocks in organic synthesis, catalysts and ligands in metal complex catalysis, and have found applications in medicine. The addition reactions of triflamide in the presence of oxidizing agents to alkenes and dienes are considered separately.

Gold-catalyzed cycloadditions of allenes via metal carbenes

In recent years, gold-catalyzed cycloadditions of allenes, especially those involving a gold carbene intermediate, have received significant interest, as they avoid the utilization of potentially hazardous and inaccessible diazo compounds as starting materials for carbene generation. Cycloaddition reactions consisting of the uncomplicated addition of two or more unsaturated functional groups are one of the most efficient synthetic methodologies for the rapid assembly of carbo- and heterocyclic structures from simple acyclic precursors. In this review, we introduce an overview of the advances in the gold-catalyzed cycloaddition of allenes via a metal carbene intermediate and categorize these reactions according to the reaction types of the cycloadditions.

Facile synthesis of the spiro-pyridoindolone scaffold via a gold-catalysed intramolecular alkynol cyclisation/hydroindolylation

A simple approach for the synthesis of pyridoindolone scaffolds with a spiroannulated tetrahydrofuran ring is described. The overall process comprises intramolecular sequential gold-catalysed 5-endo-dig alkynol cycloisomerization and subsequent addition of indole C2 to the in situ generated oxocarbenium cation.

Acid-promoted formal [3 + 2] cyclization/N,O-ketalization of in situ generated ortho-alkynyl quinone methides: access to bridged 2,3-cyclopentanoindoline skeletons

An acid-catalyzed formal [3 + 2] cyclization/N,O-ketalization of in situ formed ortho-alkynyl quinone methides (o-AQMs) and tryptophol derivatives was developed.

Radical-mediated alkene carboamination/dearomatization of arylsulfonyl-o-allylanilines via photoredox catalysis

A mild and redox-neutral protocol is developed for the synthesis of 1,4-cyclohexadiene-containing indoline-fused heterocycles via photoredox catalysis.

Ligand-controlled chemoselectivity in gold-catalyzed cascade cyclization of 1,4-diene-tethered 2-alkynylbenzaldehydes

A synthetic method that relies on the gold(i)-catalyzed cascade annulation of skipped 1,4-diene-tethered 2-alkynylbenzaldehydes for the chemo- and stereoselective assembly polycyclic bridged-pyrrolidines and -azepines is described.

Mechanistic Studies of the Pd- and Pt-Catalyzed Selective Cyclization of Propargyl/Allenyl Complexes

Following the discovery of an unusual transition-metal-catalyzed reaction, the elucidation of the underlying mechanism is essential to understand the characteristic reactivity of the metal. We previously reported a synthetic method for tricyclic indoles using Pt-catalyzed Friedel-Crafts-type C-H coupling. In this reaction, the Pt catalyst selectively formed a seven-membered ring, but the Pd catalyst only afforded a six-membered ring. However, the reasons for the different selectivities caused by Pd and Pt were unclear. We performed density functional theory (DFT) calculations and experimental studies to reveal the origin of the different behaviors of the two metals. The calculations revealed that the formation of the six- and seven-membered rings proceeds via η¹-allenyl and η³-propargyl/allenyl complexes, respectively. A molecular orbital analysis of the η³-propargyl/allenyl complex revealed that, for the platinum complex, the energy required to convert the unoccupied molecular orbital on the reactive carbon into the lowest unoccupied molecular orbital (LUMO) was lower than that for the palladium complex. In addition, DFT calculations revealed that the combination of platinum and bis[2-(diphenylphosphino)phenyl] ether (DPEphos) reduced the activation energy of the seven-membered cyclization in comparison with palladium or PPh₃. Additional experimental studies, including NMR studies and stoichiometric reactions, support the aforementioned examination.

Copper-catalyzed cyclization reaction: synthesis of trifluoromethylated indolinyl ketones

A novel, simple, effective and rapid synthetic method to construct the C-2 trifluoromethylated indolinyl ketones via a copper-catalyzed cyclization reaction between N-alkylaniline and β-(trifluoromethyl)-α,β-unsaturated enones was developed. The results of the control experiments show that the reaction may involve a radical mechanism by a single-electron transfer process. Moreover, a broad substrate scope and good functional groups, high diastereoselectivities (dr, up to >20 : 1) as well as gram-scale synthesis make this approach highly attractive.

Divergent Gold Catalysis: Unlocking Molecular Diversity through Catalyst Control

The catalyst-directed divergent synthesis, commonly termed as "divergent catalysis", has emerged as a promising technique as it allows chartering of structurally distinct products from common substrates simply by modulating the catalyst system. In this regard, gold complexes emerged as powerful catalysts as they offer unique reactivity profiles as compared to various other transition metal catalysts, primarily due to their salient electronic and geometrical features. Owing to the tunable soft π-acidic nature, gold catalysts not only evolved as superior contenders for catalyzing the reactions of alkynes, alkenes, and allenes but also, more intriguingly, have been found to provide divergent reaction pathways over other π-acid catalysts such as Ag, Pt, Pd, Rh, Cu, In, Sc, Hg, Zn, etc. The recent past has witnessed a renaissance in such examples wherein, by choosing gold catalysts over other transition metal catalysts or by fine-tuning the ligands, counteranions or oxidation states of the gold catalyst itself, a complete reactivity switch was observed. However, reviews documenting such examples are sporadic; as a result, most of the reports of this kind remained scattered in the literature, thereby hampering further development of this burgeoning field. By conceptualizing the idea of "Divergent Gold Catalysis (DGC)", this review aims to consolidate all such reports and provide a unified approach necessary to pave the way for further advancement of this exciting area. Based on the factors governing the divergence in product formation, an explicit classification of DGC has been provided. To gain a fundamental understanding of the divergence in observed reactivities and selectivities, the review is accompanied by mechanistic insights at appropriate places.

Selective Synthesis of Pyrano[3,2-b]indoles or Cyclopenta[b]indoles Tethered with Medium-Sized Rings via Cascade C-C σ-Bond Cleavage and C-H Functionalization

Highly atom-economical tandem reactions have been developed for the synthesis of pyrano[3,2-b]indoles or cyclopenta[b]indoles tethered with 7-, 8-, or 9-membered rings. These reactions first undergo a carbon-carbon σ-bond cleavage reaction of cyclic β-ketoesters. Next, in the presence of CuCl₂ and Ag₂CO₃, intramolecular O-H/C-H coupling occurs to give pyrano[3,2-b]indoles. This is the first example for capture of the enoloxyl radical of the intramolecular C-O bond formation reaction, whereas C3 nucleophilic addition afforded cyclopenta[b]indoles using TsOH·H₂O.

Recent advances of Ritter reaction and its synthetic applications

This review provides a comprehensive survey of Ritter reactions from 2014 to 2020.

An Apparent Umpolung Reactivity of Indole through [Au]-Catalysed Cyclisation and Lewis-Acid-Mediated Allylation

The sequential functionalization of indole C2 and C3 in an umpolung fashion was executed with a predesigned substrate and choice of reagents. The developed method comprises gold-catalysed alkynol cycloisomerisation/intramolecular addition of C2 of indole and subsequent BF₃ ⋅OEt₂ -mediated regioselective C3 allylation, resulting in the synthesis of the functionalized indoloisoquinolinone scaffold. The reaction involves 5-endo-alkynol cycloisomerisation and the dearomative addition of indole C2 to the intermediate oxocarbenium cation, which results in two equilibrating fused and spiropentacyclic intermediates, which upon treatment with allyl silane in the presence of BF₃ ⋅OEt₂ , undergo selective indole C3 allylation. Other nucleophiles, such as hydride, azide and indole, were also found to be compatible with this process.

Asymmetric construction of pyrido[1,2-a]-1H-indole derivatives via a gold-catalyzed cycloisomerization

Pyrido[1,2-a]-1H-indoles are important scaffolds found in many biologically active compounds. Herein, we first developed an IPrAuCl/AgSbF₆-catalyzed cycloisomerization of N-1,3-disubstituted allenyl indoles affording pyrido[1,2-a]-1H-indoles. Then the axial-to-central chirality transfer starting from enantio-enriched N-1,3-disubstituted allenylindoles affording optically active pyrido[1,2-a]-1H-indoles has been realized in excellent yields and enantioselectivities. A mechanism has been proposed based on mechanistic studies. Synthetic applications have also been demonstrated.

Gold-Catalyzed Synthetic Strategies towards Four-Carbon Ring Systems

Four carbon ring systems are frequently present in natural products with remarkable biological activities such as terpenoids, alkaloids, and steroids. The development of new strategies for the assembly of these structures in a rapid and efficient manner has attracted the interest of synthetic chemists for a long time. The current research is focused mainly on the development of synthetic methods that can be performed under mild reaction conditions with a high tolerance to functional groups. In recent years, gold complexes have turned into excellent candidates for this aim, owing to their high reactivity, and are thus capable of promoting a wide range of transformations under mild conditions. Their remarkable efficiency has been thoroughly demonstrated in the synthesis of complex organic molecules from simple starting materials. This review summarizes the main synthetic strategies described for gold-catalyzed four-carbon ring formation, as well as their application in the synthesis of natural products.

Iron(III) Chloride as a Mild Catalyst for the Dearomatizing Cyclization of N-Acylindoles

A catalytic approach for the preparation of indolines by dearomatizing cyclization is presented. FeCl₃ acts as a catalyst to afford tetracyclic 5a,6-dihydro-12H-indolo[2,1-b][1,3]benzoxazin-12-ones in good yields. The cyclization also proceeds with tosylamides forming C-N bonds in 53% yield.

Chemodivergent reactions

An important strategy for the efficient generation of diversity in molecular structures is the utilization of common starting materials in chemodivergent transformations. The most studied solutions for switching the chemoselectivity rely on the catalyst, ligand, additive, solvent, temperature, time, pressure, pH and even small modifications in the substrate. In this review article several processes have been selected such as inter- and intramolecular cyclizations, including carba-, oxa-, thia- and oxazacyclizations promoted mainly by Brønsted or Lewis acids, transition metals and organocatalysts, as well as radical reactions. Catalyst-controlled intra- and intermolecular cyclizations are mainly described to give five- and six-membered rings. Cycloaddition reactions involving (2+2), (3+2), (3+3), (4+1), (4+2), (5+2), (6+2) and (7+2) processes are useful reactions for the synthesis of cyclic systems using organocatalysts, metal catalysts and Lewis acid-controlled processes. Addition reactions mainly of carba- and heteronucleophiles to unsaturated conjugated substrates can give different adducts via metal catalyst-, Lewis acid- and solvent-dependent processes. Carbonylation reactions of amines and phenols are carried out via ligand-controlled transition metal-catalyzed multicomponent processes. Ring-opening reactions starting mainly from cyclopropanols, cyclopropenols and epoxides or aziridines are applied to the synthesis of acyclic versus cyclic products under catalyst-control mainly by Lewis acids. Chemodivergent reduction reactions are performed using dissolving metals, sodium borohydride or hydrogen transfer conditions under solvent control. Oxidation reactions include molecular oxygen under solvent control or using different dioxiranes, as well as chemodivergent palladium catalyzed cross-coupling reactions using boronic acids are applied to aromatic and allenic compounds. Other chemodivergent reactions such as alkylations and allylations under transition metal catalysis, dimerization of acetylenes, bromination of benzylic substrates, and A³-couplings are performed via catalyst- or reaction condition-dependent processes.

Synthesis of cyclobutane-fused oxygen-containing tricyclic framework via thermally promoted intramolecular cycloaddition of cyclohexadienone-tethered allenes

We have developed a unique approach for the thermally promoted cycloaddition of cyclohexadienone-tethered allenes to form a versatile cyclobutane-fused oxygen-containing tricyclic framework in an environmentally friendly and atomic economic fashion with high regioselectivity. The reaction encompasses a broad substrate scope and functional group tolerance of cyclohexadienone moieties. Moreover, the cycloaddition was also applicable to the late-stage functionalization of pharmaceutically relevant compounds.

Lewis Base/Brønsted Acid Co-Catalyzed Asymmetric Thiolation of Alkenes with Acid-Controlled Divergent Regioselectivity

A divergent strategy for the facile preparation of various enantioenriched phenylthio-substituted lactones was developed based on Lewis base/Brønsted acid co-catalyzed thiolation of homoallylic acids. The acid-controlled regiodivergent cyclization (6-endo vs. 5-exo) and acid-mediated stereoselective rearrangement of phenylthio-substituted lactones were explored. Experimental and computational studies were performed to clarify the origins of the regioselectivity and enantioselectivity. The calculation results suggest that C-O and C-S bond formation might occur simultaneously, without formation of a commonly supposed catalyst-coordinated thiiranium ion intermediate and the potential π-π stacking between substrate and SPh as an important factor in the enantio-determining step. Finally, this methodology was applied in the rapid syntheses of the bioactive natural products (+)-ricciocarpin A and (R)-dodecan-4-olide.

Cu(I)-Catalyzed Intramolecular Tandem Cyclization of N-Indole-Tethered Cyclopropenes: Synthesis of Functionalized Hydrogenated Diazabenzo[ a]cyclopenta[ cd]azulene Derivatives

A Cu(I)-catalyzed [3 + 2] intramolecular cycloaddition reaction of N-indole-tethered cyclopropenes is presented in this paper. This reaction starts from the formation of π-allyl cationic intermediate or its resonance-stabilized metal carbenoid intermediate upon activation of cyclopropene with Cu(I) catalyst and a Friedel-Crafts-type cyclization to give functionalized hydrogenated diazabenzo[ a]cyclopenta[ cd]azulenes in good to excellent yields along with moderate to good dr values. The asymmetric variant of this cycloaddition reaction can be realized, giving the desired products with moderate ee values.

Stereoselective Construction of Methylenecyclobutane-Fused Indolines through Photosensitized [2+2] Cycloaddition of Allene-Tethered Indole Derivatives

Irradiation of 1-(hexa-4,5-dienoyl)indole derivatives in the presence of an aromatic ketone by a high-pressure mercury lamp through Pyrex glass gave the corresponding cyclized products stereoselectively in high yields. The major part of the products was an all- cis-fused methylenecyclobutane-type compound produced through [2+2] cycloaddition, accompanied by small amounts of alkynes via 1,5-hydrogen transfer of a biradical intermediate. Among a range of aromatic ketones, 3',4'-dimethoxyacetophenone was found to sensitize the substrate quite effectively.