NO Disproportionation at a Mononuclear Site-Isolated Fe2+ Center in Fe2+-MOF-5

Visible-Light-Driven NO Release from Postmodified MOFs via Photoinduced Electron Transfer for Antibacterial Application

Photoresponsive nitric oxide (NO)-releasing materials (NORMs) enable the spatiotemporal delivery of NO to facilitate their potential applications in physiological conditions. Here two novel metal-organic frameworks (MOFs)-based photoactive NORMs achieved by the incorporation of prefunctionalized NO donors into the photosensitive Fe-MOFs via a postmodification strategy is reported. The modified Fe-MOFs display superior photoactivity of NO release when exposed to visible light (up to 720 nm). Significantly, the visible-light-driven NO release properties are further corroborated by their efficient antibacterial performance.

Gram-scale synthesis of MIL-125 nanoparticles and their solution processability

Although metal-organic framework (MOF) photocatalysts have become ubiquitous, basic aspects of their photoredox mechanisms remain elusive. Nanosizing MOFs enables solution-state techniques to probe size-dependent properties and molecular reactivity, but few MOFs have been prepared as nanoparticles (nanoMOFs) with sufficiently small sizes. Here, we report a rapid reflux-based synthesis of the photoredox-active MOF Ti8O8(OH)4(terephthalate)6 (MIL-125) to achieve diameters below 30 nm in less than 2 hours. Whereas MOFs generally require ex situ analysis by solid-state techniques, sub-30 nm diameters ensure colloidal stability for weeks and minimal light scattering, permitting in situ analysis by solution-state methods. Optical absorption and photoluminescence spectra of free-standing colloids provide direct evidence that the photoredox chemistry of MIL-125 involves Ti3+ trapping and charge accumulation onto the Ti-oxo clusters. Solution-state potentiometry collected during the photochemical process also allows simultaneous measurement of MOF Fermi-level energies in situ. Finally, by leveraging the solution-processability of these nanoparticles, we demonstrate facile preparation of mixed-matrix membranes with high MOF loadings that retain the reversible photochromism. Taken together, these results demonstrate the feasibility of a rapid nanoMOF synthesis and fabrication of a photoactive membrane, and the fundamental insights they offer into heterogeneous photoredox chemistry.

Conceptual and Practical Aspects of Metal-Organic Frameworks for Solid-Gas Reactions

The presence of site-isolated and well-defined metal sites has enabled the use of metal-organic frameworks (MOFs) as catalysts that can be rationally modulated. Because MOFs can be addressed and manipulated through molecular synthetic pathways, they are chemically similar to molecular catalysts. They are, nevertheless, solid-state materials and therefore can be thought of as privileged solid molecular catalysts that excel in applications involving gas-phase reactions. This contrasts with homogeneous catalysts, which are overwhelmingly used in the solution phase. Herein, we review theories dictating gas phase reactivity within porous solids and discuss key catalytic gas-solid reactions. We further treat theoretical aspects of diffusion within confined pores, the enrichment of adsorbates, the types of solvation spheres that a MOF might impart on adsorbates, definitions of acidity/basicity in the absence of solvent, the stabilization of reactive intermediates, and the generation and characterization of defect sites. The key catalytic reactions we discuss broadly include reductive reactions (olefin hydrogenation, semihydrogenation, and selective catalytic reduction), oxidative reactions (oxygenation of hydrocarbons, oxidative dehydrogenation, and carbon monoxide oxidation), and C-C bond forming reactions (olefin dimerization/polymerization, isomerization, and carbonylation reactions).

Largely Entangled Diamondoid Framework with High-Density Urea and Divergent Metal Nodes for Selective Scavenging of CO2 and Molecular Dimension-Mediated Size-Exclusive H-Bond Donor Catalysis

Pore environment modulation with high-density polarizing groups in metal-organic frameworks (MOFs) can effectively accomplish selective and multicyclic carbon dioxide (CO₂) adsorption, whereas the incorporation of task-specific organic sites inside these porous vessels promise to evade self-quenching, solubility, and recyclability issues in hydrogen-bond donating (HBD) catalysis. However, concurrent amalgamation of both these attributes over a single platform is rare but extremely demanding in view of sustainable applications. We designed a robust diamondoid framework CSMCRI-17 (CSMCRI = Central Salt and Marine Chemicals Research Institute) from the mixed-ligand assembly of azo group-containing dicarboxylate ligand, urea-functionalized pyridyl linker, and Zn(II) nodes with specific divergent coordination. Seven-fold interpenetration to the microporous structure largely augments N-rich functionality that facilitates high CO₂ uptake in the activated form (17a) with good CO₂ selectivity over N₂ and CH₄ that outperform many reported materials. The framework displays very strong CO₂ affinity and no reduction in adsorption capacity over multiple uptake-release cycles. Benefitting from the pore-wall decoration with urea functionality from the pillaring strut, 17a further demonstrates hydrogen-bond-mediated Friedel-Crafts alkylation of indole with β-nitrostyrene under mild conditions, with multicyclic usability and excellent reactivity toward wide ranges of substituted nucleophiles and electrophiles. Interestingly, interpenetration-generated optimum-sized pores induce poor conversion to sterically encumbered substrate via molecular dimension-mediated size selectivity that is alternatively ascribed from additional control experiments and support the occurrence of HBD reaction within the MOF cavity. The catalytic path is detailed in light of the change of emission intensity of the framework by the electrophile as well as the judicious choice of the substrate, which authenticates the prime role of urea moiety-governed two-point hydrogen bonding.

Fabrication of Multifunctional Electronic Textiles Using Oxidative Restructuring of Copper into a Cu-Based Metal-Organic Framework

This paper describes a novel synthetic approach for the conversion of zero-valent copper metal into a conductive two-dimensional layered metal-organic framework (MOF) based on 2,3,6,7,10,11-hexahydroxytriphenylene (HHTP) to form Cu₃(HHTP)₂. This process enables patterning of Cu₃(HHTP)₂ onto a variety of flexible and porous woven (cotton, silk, nylon, nylon/cotton blend, and polyester) and non-woven (weighing paper and filter paper) substrates with microscale spatial resolution. The method produces conductive textiles with sheet resistances of 0.1-10.1 MΩ/cm², depending on the substrate, and uniform conformal coatings of MOFs on textile swatches with strong interfacial contact capable of withstanding chemical and physical stresses, such as detergent washes and abrasion. These conductive textiles enable simultaneous detection and detoxification of nitric oxide and hydrogen sulfide, achieving part per million limits of detection in dry and humid conditions. The Cu₃(HHTP)₂ MOF also demonstrated filtration capabilities of H₂S, with uptake capacity up to 4.6 mol/kg_MOF. X-ray photoelectron spectroscopy and diffuse reflectance infrared spectroscopy show that the detection of NO and H₂S with Cu₃(HHTP)₂ is accompanied by the transformation of these species to less toxic forms, such as nitrite and/or nitrate and copper sulfide and S_x species, respectively. These results pave the way for using conductive MOFs to construct extremely robust electronic textiles with multifunctional performance characteristics.

Reductive NO Coupling at Dicopper Center via a [Cu2(NO)2]2+ Diamond-Core Intermediate

Treatment of a dicopper(I,I) complex with excess amounts of NO leads to the formation of a dicopper dinitrosyl [Cu₂(NO)₂]²⁺ complex capable of (i) releasing two equivalents of NO reversibly in 90% yield and (ii) reacting with another equivalent of NO to afford N₂O and dicopper nitrosyl oxo species [Cu₂(NO)(O)]²⁺. Resonance Raman characterization of the [Cu₂(NO)₂]²⁺ complex shows a ¹⁵N-sensitive N═O stretch at 1527.6 cm^-1 and two Cu-N stretches at 390.6 and 414.1 cm^-1, supporting a symmetric diamond-core structure with bis-μ-NO ligands. The conversion of [Cu₂(NO)₂]²⁺ to [Cu₂(NO)O]²⁺ occurs via a rate-limiting reaction with NO and bypasses the dicopper oxo intermediate, a mechanism distinct from that of diFe-mediated NO reduction to N₂O.

Direct Reduction of NO to N2O by a Mononuclear Nonheme Thiolate Ligated Iron(II) Complex via Formation of a Metastable {FeNO}7 Complex

Addition of NO to a nonheme dithiolate-ligated iron(II) complex, FeII(Me3TACN)(S2SiMe2) (1), results in the generation of N2O. Low-temperature spectroscopic studies reveal a metastable six-coordinate {FeNO}7 intermediate (S = 3/2) that was trapped at -135 °C and was characterized by low-temperature UV-vis, resonance Raman, EPR, Mössbauer, XAS, and DFT studies. Thermal decay of the {FeNO}7 species leads to the evolution of N2O, providing a rare example of a mononuclear thiolate-ligated {FeNO}7 that mediates NO reduction to N2O without the requirement of any exogenous electron or proton sources.

Dissociation of Bipyridine and Coordination with Nitrosyl: Cyclometalated Ruthenium Nitrosyl Complex

A novel family of ruthenium nitrosyl complexes [Ru(bpy)(C^∧N)(MeCN)NO](PF₆)₂ (2a-2e, bpy = 2,2'-bipyridine, HC^∧N = 2-phenylpyridine and its derivatives) has been prepared by reacting cyclometalated ruthenium complexes [Ru(bpy)₂(C^∧N)][PF₆] (1a-1e) with NO⁺, which were comprehensively characterized by mass, IR, NMR, and UV-vis spectra as well as the single-crystal X-ray structure determinations. Herein, the coordination geometry of Ru atoms in 2a-2e is a distorted octahedron and {Ru^II-NO⁺}⁶ is present in these complexes. Theoretical calculations suggest that the reactions involving dissociation of one bipyridine and coordination with NO⁺ proceed spontaneously (ΔG < 0) and the transformation from 1a-1e to the intermediates is dominated by substituents (ΔG_RI varies from -1.19 to -1.53 eV), which influence the binding energy between Ru(II) and NO⁺ in complexes 2a-2e (-89.42 to -101.17 kcal/mol) and thus control the photorelease of NO on a certain scale. The weak absorption bands in the visible region could be attributed to the contribution of dπ(Ru^II) → π*(NO⁺), which were enhanced greatly under light, indicating the possible release of NO. The photoinduced NO, as well as singlet oxygen (¹O₂), was then confirmed by EPR spectra, and the amount of NO released from 2a-2e was estimated via Griess reagent assay. The cytotoxicity of these complexes with or without visible light irradiation was also investigated using an MTT assay.

Disproportionation of Nitric Oxide at a Surface-Bound Nickel Porphyrinoid

Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F430 and P450nor co-factors, with their reduced NiI - and FeIII -containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario.

Disproportionation of Nitric Oxide at a Surface-Bound Nickel Porphyrinoid

Uncommon metal oxidation states in porphyrinoid cofactors are responsible for the activity of many enzymes. The F430 and P450nor co-factors, with their reduced NiI- and FeIII-containing tetrapyrrolic cores, are prototypical examples of biological systems involved in methane formation and in the reduction of nitric oxide, respectively. Herein, using a comprehensive range of experimental and theoretical methods, we raise evidence that nickel tetraphenyl porphyrins deposited in vacuo on a copper surface are reactive towards nitric oxide disproportionation at room temperature. The interpretation of the measurements is far from being straightforward due to the high reactivity of the different nitrogen oxides species (eventually present in the residual gas background) and of the possible reaction intermediates. The picture is detailed in order to disentangle the challenging complexity of the system, where even a small fraction of contamination can change the scenario.

Mechanistic study on reduction of nitric oxide to nitrous oxide using a dicopper complex

A density functional theory study was carried out to investigate the reduction mechanisms of NO to N₂O using a dicopper complex reported by Zhang and coworkers (J. Am. Chem. Soc., 2019, 141, 10159-10164). The reaction mechanism consists of three steps: N-N bond formation, isomerization of the resultant N₂O₂ moiety, and cleavage of the N-O bond.

Metal-Organic Frameworks for NOx Adsorption and Their Applications in Separation, Sensing, Catalysis, and Biology

Nitrogen oxide (NO_x ) is a family of poisonous and highly reactive gases formed when fuel is burned at high temperatures during anthropogenic behavior. It is a strong oxidizing agent that significantly contributes to the ozone and smog in the atmosphere. Thus, NO_x removal is important for the ecological environment upon which the civilization depends. In recent decades, metal-organic frameworks (MOFs) have been regarded as ideal candidates to address these issues because they form a reticular structure between proper inorganic and organic constituents with ultrahigh porosity and high internal surface area. These characteristics render them chemically adaptable for NO_x adsorption, separation, sensing, and catalysis. In additional, MOFs enable potential nitric oxide (NO) delivery for the signaling of molecular NO in the human body. Herein, the different advantages of MOFs for coping with current environmental burdens and improving the habitable environment of humans on the basis of NO_x adsorption are reviewed.

Urea-engineering mediated hydrogen-bond donating Friedel−Crafts alkylation of indoles and nitroalkenes in dual-functionalized and microporous metal-organic framework with high recyclability and pore-fitting-induced size-selectivity

As an effective alternative to Lewis acid activation, hydrogen-bond donating (HBD) organo-catalysis denotes a powerful construction tool to important classes of carbon–carbon bonds, wherein metal-organic frameworks (MOFs) alleviate issues like...

Influence of the primary and secondary coordination spheres on nitric oxide adsorption and reactivity in cobalt(ii)-triazolate frameworks

Nitric oxide (NO) is an important signaling molecule in biological systems, and as such, the ability of porous materials to reversibly adsorb NO is of interest for potential medical applications. Although certain metal-organic frameworks are known to bind NO reversibly at coordinatively unsaturated metal sites, the influence of the metal coordination environment on NO adsorption has not been studied in detail. Here, we examine NO adsorption in the frameworks Co2Cl2(bbta) (H2bbta = 1H,5H-benzo(1,2-d:4,5-d')bistriazole) and Co2(OH)2(bbta) using gas adsorption, infrared spectroscopy, powder X-ray diffraction, and magnetometry. At room temperature, NO adsorbs reversibly in Co2Cl2(bbta) without electron transfer, with low temperature data supporting spin-crossover of the NO-bound cobalt(ii) centers of the material. In contrast, adsorption of low pressures of NO in Co2(OH)2(bbta) is accompanied by charge transfer from the cobalt(ii) centers to form a cobalt(iii)-NO- adduct, as supported by diffraction and infrared spectroscopy data. At higher pressures of NO, characterization data indicate additional uptake of the gas and disproportionation of the bound NO to form a cobalt(iii)-nitro (NO2 -) species and N2O gas, a transformation that appears to be facilitated by secondary sphere hydrogen bonding interactions between the bound NO2 - and framework hydroxo groups. These results provide a rare example of reductive NO binding in a cobalt-based metal-organic framework, and they demonstrate that NO uptake can be tuned by changing the primary and secondary coordination environment of the framework metal centers.

NO Reduction to N2O Triggered by a Dinuclear Dinitrosyl Iron Complex via the Associated Pathways of Hyponitrite Formation and NO Disproportionation

In spite of the comprehensive study of the metal-mediated conversion of NO to N2O disclosing the conceivable processes/mechanism in biological and biomimetic studies, in this study, the synthesis cycles and mechanism of NO reduction to N2O triggered by the electronically localized dinuclear {Fe(NO)2}10-{Fe(NO)2}9 dinitrosyl iron complex (DNIC) [Fe(NO)2(μ-bdmap)Fe(NO)2(THF)] (1) (bdmap = 1,3- bis(dimethylamino)-2-propanolate) were investigated in detail. Reductive conversion of NO to N2O triggered by complex 1 in the presence of exogenous ·NO occurs via the simultaneous formation of hyponitrite-bound {[Fe2(NO)4(μ-bdmap)]2(κ4-N2O2)} (2) and [NO2]--bridged [Fe2(NO)4(μ-bdmap)(μ-NO2)] (3) (NO disproportionation yielding N2O and complex 3). EPR/IR spectra, single-crystal X-ray diffraction, and the electrochemical study uncover the reversible redox transformation of {Fe(NO)2}9-{Fe(NO)2}9 [Fe2(NO)4(μ-bdmap)(μ-OC4H8)]+ (7) ↔ {Fe(NO)2}10-{Fe(NO)2}9 1 ↔ {Fe(NO)2}10-{Fe(NO)2}10 [Fe(NO)2(μ-bdmap)Fe(NO)2]- (6) and characterize the formation of complex 1. Also, the synthesis study and DFT computation feature the detailed mechanism of electronically localized {Fe(NO)2}10-{Fe(NO)2}9 DNIC 1 reducing NO to N2O via the associated hyponitrite-formation and NO-disproportionation pathways. Presumably, the THF-bound {Fe(NO)2}9 unit of electronically localized {Fe(NO)2}10-{Fe(NO)2}9 complex 1 served as an electron buffering reservoir for accommodating electron redistribution, and the {Fe(NO)2}10 unit of complex 1 acted as an electron-transfer channel to drive exogeneous ·NO coordination to yield proposed relay intermediate κ2-N,O-[NO]--bridged [Fe2(NO)4(μ-bdmap)(μ-NO)] (A) for NO reduction to N2O.

Metal-organic frameworks of linear trinuclear cluster secondary building units: structures and applications

Secondary building units (SBUs) in metal-organic frameworks (MOFs) are essential from both a structural and performance perspective. While a variety of SBUs, such as paddlewheel CuII2, triangular CrIII3, tetrahedral ZnII4, and octahedral ZrIV6 have been extensively studied, the linear trinuclear SBUs (herein denoted as M₃), though frequently encountered, are rarely discussed as a class. A literature survey reveals that M₃ clusters are ubiquitous in discrete molecular entities as well as in MOFs. Unlike most other cluster types, however, they have an unprecedented metal diversity and ligand tolerance. The single-crystals of some M₃-based MOFs are also sufficiently robust upon guest removal and exchange or multi-step post-modifications to enable catalytic mechanism elucidation. Some of these M₃-based SBUs endow MOFs with stability under demanding conditions necessary, for example, in flue gas separation. Herein we review MOFs sustained by this common but under-appreciated class of SBUs and discuss applications of the resulting MOF motifs.

A Nonheme Mononuclear {FeNO}7 Complex that Produces N2 O in the Absence of an Exogenous Reductant

A new nonheme iron(II) complex, Fe^II (Me₃ TACN)((OSi^Ph2 )₂ O) (1), is reported. Reaction of 1 with NO_(g) gives a stable mononitrosyl complex Fe(NO)(Me₃ TACN)((OSi^Ph2 )₂ O) (2), which was characterized by Mössbauer (δ=0.52 mm s^-1 , |ΔE_Q |=0.80 mm s^-1 ), EPR (S=3/2), resonance Raman (RR) and Fe K-edge X-ray absorption spectroscopies. The data show that 2 is an {FeNO}⁷ complex with an S=3/2 spin ground state. The RR spectrum (λ_exc =458 nm) of 2 combined with isotopic labeling (¹⁵ N, ¹⁸ O) reveals ν(N-O)=1680 cm^-1 , which is highly activated, and is a nearly identical match to that seen for the reactive mononitrosyl intermediate in the nonheme iron enzyme FDPnor (ν(NO)=1681 cm^-1 ). Complex 2 reacts rapidly with H₂ O in THF to produce the N-N coupled product N₂ O, providing the first example of a mononuclear nonheme iron complex that is capable of converting NO to N₂ O in the absence of an exogenous reductant.

In Situ Coupling of Catalytic Centers into Artificial Substrate Mesochannels as Super-Active Metalloenzyme Mimics

Highly evolved substrate channels in natural enzymes facilitate the rapid capture of substrates and direct transfer of intermediates between cascaded catalytic units, thus rationalizing their efficient catalysis. In this study, a nanoscale ordered mesoporous Ce-based metal-organic framework (OMUiO-66(Ce)) is designed as an artificial substrate channel, where MnO₂ is coupled to Ce-O clusters as a super-active catalase (CAT). An in situ soft template reduction strategy is developed to deposit well-dispersed and exposed MnO₂ in the mesochannels of OMUiO-66(Ce). Several synthesis parameters are optimized to minimize the particle size to ≈150 nm for efficient intracellular endocytosis. The mesochannels provide interaction guidance that not only rapidly drove H₂ O₂ substrates to CAT-like catalytic centers, but also seamlessly transfer H₂ O₂ intermediates between superoxide dismutase-like and CAT-like biocatalytic cascades. As a result, the biomimetic system exhibits high efficiency, low dosage, and long-lasting intracellular antioxidant function. Under disease-related oxidative stress, the artificial substrate channels promote the rate of the reactions catalyzed by MnO₂ , which exceeds that of the reactions catalyzed by natural CAT. Based on this observation, a set of design rules for substrate channels are proposed to guide the rational design of super-active biomimetic systems.

Nickel-mediated N-N bond formation and N2O liberation via nitrogen oxyanion reduction

The syntheses of (DIM)Ni(NO₃)₂ and (DIM)Ni(NO₂)₂, where DIM is a 1,4-diazadiene bidentate donor, are reported to enable testing of bis boryl reduced N-heterocycles for their ability to carry out stepwise deoxygenation of coordinated nitrate and nitrite, forming O(Bpin)₂. Single deoxygenation of (DIM)Ni(NO₂)₂ yields the tetrahedral complex (DIM)Ni(NO)(ONO), with a linear nitrosyl and κ¹-ONO. Further deoxygenation of (DIM)Ni(NO)(ONO) results in the formation of dimeric [(DIM)Ni(NO)]₂, where the dimer is linked through a Ni–Ni bond. The lost reduced nitrogen byproduct is shown to be N₂O, indicating N–N bond formation in the course of the reaction. Isotopic labelling studies establish that the N–N bond of N₂O is formed in a bimetallic Ni₂ intermediate and that the two nitrogen atoms of (DIM)Ni(NO)(ONO) become symmetry equivalent prior to N–N bond formation. The [(DIM)Ni(NO)]₂ dimer is susceptible to oxidation by AgX (X = NO₃⁻, NO₂⁻, and OTf⁻) as well as nitric oxide, the latter of which undergoes nitric oxide disproportionation to yield N₂O and (DIM)Ni(NO)(ONO). We show that the first step in the deoxygenation of (DIM)Ni(NO)(ONO) to liberate N₂O is outer sphere electron transfer, providing insight into the organic reductants employed for deoxygenation. Lastly, we show that at elevated temperatures, deoxygenation is accompanied by loss of DIM to form either pyrazine or bipyridine bridged polymers, with retention of a BpinO⁻ bridging ligand.

Deoxygenation of nitrogen oxyanions coordinated to nickel using reduced borylated heterocycles leads to N–N bond formation and N₂O liberation. The nickel dimer product facilitates NO disproportionation, leading to a synthetic cycle.

Tunable Band Gaps in MUV-10(M): A Family of Photoredox-Active MOFs with Earth-Abundant Open Metal Sites

Titanium-based metal-organic frameworks (Ti-MOFs) have attracted intense research attention because they can store charges in the form of Ti³⁺ and they serve as photosensitizers to cocatalysts through heterogeneous photoredox reactions at the MOF-liquid interface. Both the charge storage and charge transfer depend on the redox potentials of the MOF and the molecular substrate, but the factors controlling these energetic aspects are not well understood. Additionally, photocatalysis involving Ti-MOFs relies on cocatalysts rather than the intrinsic Ti reactivity, in part because Ti-MOFs with open metal sites are rare. Here, we report that the class of Ti-MOFs known as MUV-10 can be synthetically modified to include a range of redox-inactive ions with flexible coordination environments that control the energies of the photoactive orbitals. Lewis acidic cations installed in the MOF cluster (Cd²⁺, Sr²⁺, and Ba²⁺) or introduced to the pores (H⁺, Li⁺, Na⁺, K⁺) tune the electronic structure and band gaps of the MOFs. Through the use of optical redox indicators, we report the first direct measurement of the Fermi levels (redox potentials) of photoexcited MOFs in situ. Taken together, these results explain the ability of Ti-MOFs to store charges and provide design principles for achieving heterogeneous photoredox chemistry with electrostatic control.

Direct NO Reduction by a Biomimetic Iron(II) Pyrazolate MOF

A novel metal-organic framework (MOF) containing one-dimensional, Fe²⁺ chains bridged by dipyrazolate linkers and N,N-dimethylformamide (DMF) ligands has been synthesized. The unusual chain-type metal nodes feature accessible coordination sites on adjacent metal centers, resulting in motifs that are reminiscent of the active sites in non-heme diiron enzymes. The MOF facilitates direct reduction of nitric oxide (NO), producing nearly quantitative yields of nitrous oxide (N₂ O) and emulating the reactivity of flavodiiron nitric oxide reductases (FNORs). The ferrous form of the MOF can be regenerated via a synthetic cycle involving reduction with cobaltocene (CoCp₂ ) followed by reaction with trimethylsilyl triflate (TMSOTf).

In crystallo organometallic chemistry

X-ray crystallography is an invaluable tool in design and development of organometallic catalysis, but application typically requires species to display sufficiently high solution concentrations and lifetimes for single crystalline samples to be obtained. In crystallo organometallic chemistry relies on chemical reactions that proceed within the single-crystal environment to access crystalline samples of reactive organometallic fragments that are unavailable by alternate means. This highlight describes approaches to in crystallo organometallic chemistry including (a) solid-gas reactions between transition metal complexes in molecular crystals and diffusing small molecules, (b) reactions of organometallic complexes within the extended lattices of metal-organic frameworks (MOFs), and (c) intracrystalline photochemical transformations to generate reactive organometallic fragments. Application of these methods has enabled characterization of catalytically important transient species, including σ-alkane adducts of transition metals, metal alkyl intermediates implicated in metal-catalyzed carbonylations, and reactive M-L multiply bonded species involved in C-H functionalization chemistry. Opportunities and challenges for in crystallo organometallic chemistry are discussed.

Metal–Organic Frameworks as Versatile Platforms for Organometallic Chemistry

Metal–organic frameworks (MOFs) are emerging porous materials with highly tunable structures developed in the 1990s, while organometallic chemistry is of fundamental importance for catalytic transformation in the academic and industrial world for many decades. Through the years, organometallic chemistry has been incorporated into functional MOF construction for diverse applications. Here, we will focus on how organometallic chemistry is applied in MOF design and modifications from linker-centric and metal-cluster-centric perspectives, respectively. Through structural design, MOFs can function as a tailorable platform for traditional organometallic transformations, including reaction of alkenes, cross-coupling reactions, and C–H activations. Besides, an overview will be made on other application categories of organometallic MOFs, such as gas adsorption, magnetism, quantum computing, and therapeutics.

Spectroscopic Evidence of Hyponitrite Radical Intermediate in NO Disproportionation at a MOF-Supported Mononuclear Copper Site

Dianionic hyponitrite (N₂ O₂ ^2- ) is often proposed, based on model complexes, as the key intermediate in reductive coupling of nitric oxide to nitrous oxide at the bimetallic active sites of heme-copper oxidases and nitric oxide reductases. In this work, we examine the gas-solid reaction of nitric oxide with the metal-organic framework Cu^I -ZrTpmC* with a suite of in situ spectroscopies and density functional theory simulations, and identify an unusual chelating N₂ O₂ ^.- intermediate. These results highlight the advantage provided by site-isolation in metal-organic frameworks (MOFs) for studying important reaction intermediates, and provide a mechanistic scenario compatible with the proposed one-electron couple in these enzymes.

The role of metal–organic porous frameworks in dual catalysis

Metal–organic frameworks (MOFs) are a valuable group of porous crystalline solids with inorganic and organic parts that can be used in dual catalysis.

Single-Atom Catalysts Supported by Crystalline Porous Materials: Views from the Inside

Single-atom catalysts (SACs) have recently emerged as an exciting system in heterogeneous catalysis showing outstanding performance in many catalytic reactions. Single-atom catalytic sites alone are not stable and thus require stabilization from substrates. Crystalline porous materials such as zeolites and metal-organic frameworks (MOFs) are excellent substrates for SACs, offering high stability with the potential to further enhance their performance due to synergistic effects. This review features recent work on the structure, electronic, and catalytic properties of zeolite and MOF-protected SACs, offering atomic-scale views from the "inside" thanks to the subatomic resolution of synchrotron X-ray absorption spectroscopy (XAS). The extended X-ray absorption fine structure and associated methods will be shown to be powerful tools in identifying the single-atom site and can provide details into the coordination environment and bonding disorder of SACs. The X-ray absorption near-edge structure will be demonstrated as a valuable method in probing the electronic properties of SACs by analyzing the white line intensity, absorption edge shift, and pre-/postedge features. Emphasis is also placed on in situ/operando XAS using state-of-the-art equipment, which can unveil the changes in structure and properties of SACs during the dynamic catalytic processes in a highly sensitive and time-resolved manner.

Biological and Bioinspired Inorganic N-N Bond-Forming Reactions

The metallobiochemistry underlying the formation of the inorganic N-N-bond-containing molecules nitrous oxide (N2O), dinitrogen (N2), and hydrazine (N2H4) is essential to the lifestyles of diverse organisms. Similar reactions hold promise as means to use N-based fuels as alternative carbon-free energy sources. This review discusses research efforts to understand the mechanisms underlying biological N-N bond formation in primary metabolism and how the associated reactions are tied to energy transduction and organismal survival. These efforts comprise studies of both natural and engineered metalloenzymes as well as synthetic model complexes.

Metal-Organic Framework-Based Catalysts with Single Metal Sites

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Bioinspired chemistry at MOF secondary building units

This perspective describes recent developments and future directions in bioinorganic chemistry and biomimetic catalysis centered at metal–organic framework secondary building units.

The secondary building units (SBUs) in metal–organic frameworks (MOFs) support metal ions in well-defined and site-isolated coordination environments with ligand fields similar to those found in metalloenzymes. This burgeoning class of materials has accordingly been recognized as an attractive platform for metalloenzyme active site mimicry and biomimetic catalysis. Early progress in this area was slowed by challenges such as a limited range of hydrolytic stability and a relatively poor diversity of redox-active metals that could be incorporated into SBUs. However, recent progress with water-stable MOFs and the development of more sophisticated synthetic routes such as postsynthetic cation exchange have largely addressed these challenges. MOF SBUs are being leveraged to interrogate traditionally unstable intermediates and catalytic processes involving small gaseous molecules. This perspective describes recent advances in the use of metal centers within SBUs for biomimetic chemistry and discusses key future developments in this area.

NO disproportionation over defective 1T′-MoS2 monolayers

NO disproportionation can be catalyzed by MoS₂ monolayers loaded with S vacancies. When the MoS₂ sheet is under 3% compressive strain, two NO molecules at a S vacancy can form a NO₂. The left N atom will react with a third NO to afford N₂O under 3% tensile strain.

From IR to x-rays: gaining molecular level insights on metal-organic frameworks through spectroscopy

This topical review focuses on the application of several types of spectroscopy methods to a class of solid state materials called metal organic frameworks (MOFs). MOFs are self-assembled, porous crystalline materials composed of metal cluster nodes linked through coordination bonds with organic or organometallic molecular constituents. Their unique host-guest properties make them attractive for many adsorption-based applications such as gas storage and separation, catalysis, sensing and others. While much research focuses on the development and application of these materials, fundamental studies of MOF properties and molecular level host-guest interactions behind their functionality have become a significant research direction on its own. Spectroscopy methods are now ubiquitous tools in this pursuit. This review focuses on the application of three classes of spectroscopy methods to MOF materials: vibrational, optical electronic and x-ray spectroscopies. Following brief introductions to each method that include pertinent theory and experimental considerations, we present a broad overview of the types of MOF systems that have been studied, with specific examples and important new molecular level insights highlighted along the way. The current status of spectroscopic studies of MOFs is presented at the end along with some perspectives on the future directions in this area of research.

Copper(I) Complex Mediated Nitric Oxide Reductive Coupling: Ligand Hydrogen Bonding Derived Proton Transfer Promotes N2O(g) Release

A cuprous chelate bearing a secondary sphere hydrogen bonding functionality, [(PV-tmpa)Cu^I]⁺, transforms ^•NO_(g) to N₂O_(g) in high-yields in methanol. Ligand derived proton transfer facilitates N-O bond cleavage of a putative hyponitrite intermediate releasing N₂O_(g), underscoring the crucial balance between H-bonding capabilities and acidities in (bio)chemical ^•NO_(g) coupling systems.