Rational Control of Folding Cooperativity in DNA Quadruplexes

Sequence Context in DNA i-Motifs Can Nurture Very Stable and Persistent Kinetic Traps

I-motifs are non-canonical DNA structures with recognized biological significance and a proven utility in material engineering. Consequently, understanding and control of i-motif properties is essential to sustain progress across both disciplines. In this work, we systematically investigate how proximity to the most common form of DNA, a double-stranded duplex, influences the thermodynamic and kinetic properties of adjacent i-motifs. We demonstrate that double-stranded stems in i-motif loops promote kinetic trapping of very stable and persistent partially folded conformations. Further, we investigate pathways toward rational control over a folding topology makeup.

Hill-type pH probes

Sensitive detection of the minute and yet pathologically significant pH variation is important and in fact challenging for the conventional pH probes following the Henderson-Hasselbalch equation, i.e., HH-type probes. A paradigm shift to Hill-type pH probes is ongoing. Bestowed by their positive cooperative acid-base chemistry, their pH-responsive profile follows the Hill equation, which exhibits a narrower acid/base transition width than HH-type probes and warrants a higher detection sensitivity. A polymer-based Hill-type pH-responsive material was first developed. More recently, there emerged several distinct small-molecular approaches to achieve Hill-type pH-responsive profiles. They complement the polymer-based sensing materials in applications where membrane permeability is a concern. In this trends article, we rationalize the molecular origins of their positive cooperativity in pH sensing and highlight some interesting proof-of-concept applications. We also discussed future directions of this dynamic research area.

Harnessing Thorpe-Ingold Dialkylation to Access High-Hill-Percentage pH Probes

Sensitivity is an important parameter for a molecular probe. Hill-type pH probes exhibit improved detection sensitivity compared to the traditional pH probes following the Henderson-Hasselbalch equation. Exploiting positive cooperativity, we recently devised a novel molecular scaffold (PHX) to offer such an unconventional Hill-type pH titration profile. We previously confirmed that PHX is not a pure Hill-type probe yet. Only 64% of its absorbance/fluorescence turn-on is the result of a Hill-type pathway. The remaining 36% is from an undesired Henderson-Hasselbalch-type pathway (HH pathway). In this work, the Thorpe-Ingold dialkylation was harnessed to further suppress the percent contribution of the HH pathway down to 16%. We also propose that PHX is a viable molecular model for assessing the efficacy of the steric compressing effect induced by different Thorpe-Ingold dialkylations.

Engineering DNA quadruplexes in DNA nanostructures for biosensor construction

DNA quadruplexes are nucleic acid conformations comprised of four strands. They are prevalent in human genomes and increasing efforts are being directed toward their engineering. Taking advantage of the programmability of Watson-Crick base-pairing and conjugation methodology of DNA with other molecules, DNA nanostructures of increasing complexity and diversified geometries have been artificially constructed since 1980s. In this review, we investigate the interweaving of natural DNA quadruplexes and artificial DNA nanostructures in the development of the ever-prosperous field of biosensing, highlighting their specific roles in the construction of biosensor, including recognition probe, signal probe, signal amplifier and support platform. Their implementation in various sensing scenes was surveyed. And finally, general conclusion and future perspective are discussed for further developments.

Rational design of guiding elements to control folding topology in i-motifs with multiple quadruplexes

Nucleic acids are versatile scaffolds that accommodate a wide range of precisely defined operational characteristics. Rational design of sensing, molecular computing, nanotechnology, and other nucleic acid devices requires precise control over folding conformations in these macromolecules. Here, we report a new approach that empowers well-defined conformational transitions in DNA molecular devices. Specifically, we develop tools for precise folding of multiple DNA quadruplexes (i-motifs) within the same oligonucleotide strand. To accomplish this task, we modify a DNA strand with kinetic control elements (hairpins and double stranded stems) that fold on a much faster timescale and consequently guide quadruplexes toward the targeted folding topology. To demonstrate that such guiding elements indeed facilitate formation of the targeted folding topology, we thoroughly characterize the folding/unfolding transitions through a combination of thermodynamic techniques, size exclusion chromatography (SEC) and small-angle X-ray scattering (SAXS). Furthermore, we extend SAXS capabilities to produce a direct insight on the shape and dimensions of the folded quadruplexes by computing their electron density maps from solution scattering data.

Programming folding cooperativity of the dimeric i-motif with DNA frameworks for sensing small pH variations

The response sensitivity of a molecular sensor is determined by the folding cooperativity of its responsive module. Using an H⁺-responsive dimeric DNA i-motif as a model, we demonstrate the enhancement of its folding cooperativity through preorganization by a DNA framework, and with it we fabricate robust intracellular pH sensors with high response sensitivity.

Thermal and pH Stabilities of i-DNA: Confronting in vitro Experiments with Models and In-Cell NMR Data

Recent studies indicate that i-DNA, a four-stranded cytosine-rich DNA also known as the i-motif, is actually formed in vivo; however, a systematic study on sequence effects on stability has been missing. Herein, an unprecedented number of different sequences (271) bearing four runs of 3-6 cytosines with different spacer lengths has been tested. While i-DNA stability is nearly independent on total spacer length, the central spacer plays a special role on stability. Stability also depends on the length of the C-tracts at both acidic and neutral pHs. This study provides a global picture on i-DNA stability thanks to the large size of the introduced data set; it reveals unexpected features and allows to conclude that determinants of i-DNA stability do not mirror those of G-quadruplexes. Our results illustrate the structural roles of loops and C-tracts on i-DNA stability, confirm its formation in cells, and allow establishing rules to predict its stability.

Programming Biomimetically Confined Aptamers with DNA Frameworks

Active sites of proteins are generally encapsulated within three-dimensional peptide scaffolds that provide the molecular-scale confinement microenvironment. Nevertheless, the ability to tune thermodynamic stability in biomimetic molecular confinement relies on the macromolecular crowding effect of lack of stoichiometry and reconfigurability. Here, we report a framework nucleic acid (FNA)-based strategy to increase thermodynamic stability of aptamers. We demonstrate that the molecular-scale confinement increases the thermodynamic stability of aptamers via facilitated folding kinetics, which is confirmed by the single-molecule FRET (smFRET). Unfavorable conformations of aptamers are restricted as revealed by the Monte Carlo simulation. The binding affinity of the DNA framework-confined aptamer is improved by ∼3-fold. With a similar strategy we improve the catalytic activity of hemin-binding aptamer. Our approach thus shows high potential for designing protein-mimicking DNA nanostructures with enhanced binding affinity and catalytic activity for biosensing and biomedical engineering.

Multidimensional Tunability of Nucleic Acids Enables Sensing over Unknown Backgrounds

A longstanding challenge in quantitative analysis is the relationship between a sensor's dynamic range and a background: the response range must align with the target's background value. If this condition is not met, a reliable measurement is impossible. The requirement is especially critical for sensing systems displaying sharp responses. In this work, we have solved the problem of response range/background misalignment via design of sensing systems that adjust their response to actual unknown backgrounds. The sensing systems are based on nucleic acid scaffolds: due to an intrinsic trait of multidimensional tunability, the sensors can assess the actual background and adjust response range accordingly. We established a general methodology and demonstrated, as a proof-of-concept, a practically meaningful example of detecting very small changes in proton concentrations over unknown aqueous backgrounds using a DNA i-motif sensor. Owing to multidimensional tunability of a DNA i-motif, this sensor could reliably measure changes in proton concentration that are 3 orders of magnitude below currently available methodologies.

Ultrastable Bimolecular G-Quadruplexes Programmed DNA Nanoassemblies for Reconfigurable Biomimetic DNAzymes

The relatively low stability and polymorphism of bimolecular G-quadruplexes (bi-G4s) are big difficulties that are faced in employing them to guide DNA assembly, as they are usually subject to a transformation into more stable tetramolecular or G-wire structures favored by K⁺ or Mg²⁺. Although bi-G4s benefit by additional duplex handles, a challenge remains in tailoring their intrinsic properties to resolve the above difficulties. Toward this challenge, here we engineer several ultrastable bi-G4s via replacing their nucleotide loops with special mini-hairpins, which consist of a GAA loop and a short GC-paired stem. Such a structural alteration favors the formation of G:C:G:C tetrads in the head-to-head folding topologies of bi-G4s and improves their thermal stability, with an increase in the melting temperature by up to 25 °C. It dramatically reduces their structural conversion into G-wires, verified by atomic force microscopy. These features enable the utilization of two well-chosen bi-G4s to shape a DNA nanotriangle into the desired framework nucleic acid (FNA) architectures such as "bowknot" and "butterfly" that are reversibly switched by the bi-G4s. On this basis, we further build a reconfigurable DNAzyme device to mimic the activation of human telomerase that is modulated by the G4 dimerization. Our designed ultrastable bi-G4s will offer a promising tool for dynamically manipulating intracellular DNA nanoassemblies with endogenous K⁺ and exploring the relationship between dimerization and function in some physiological processes.

Unusual Isothermal Hysteresis in DNA i-Motif pH Transitions: A Study of the RAD17 Promoter Sequence

We have interrogated the isothermal folding behavior of the DNA i-motif of the human telomere, dC₁₉, and a high-stability i-motif-forming sequence in the promoter of the human DNA repair gene RAD17 using human physiological solution and temperature conditions. We developed a circular-dichroism-spectroscopy-based pH titration method that is followed by analysis of titration curves in the derivative domain and found that the observed pH-dependent folding behavior can be significantly different and, in some cases, multiphasic, with a dependence on how rapidly i-motif folding is induced. Interestingly, the human telomere sequence exhibits unusual isothermal hysteresis in which the unfolding process always occurs at a higher pH than the folding process. For the RAD17 i-motif, rapid folding by injection into a low-pH solution results in triphasic unfolding behavior that is completely diminished when samples are slowly folded in a stepwise manner via pH titration. Chemical footprinting of the RAD17 sequence and pH titrations of dT-substituted mutants of the RAD17 sequence were used to develop a model of RAD17 folding and unfolding. These results may provide valuable information pertinent to i-motif use in sensors and materials, as well as insight into the potential biological activity of i-motif-forming sequences under stepwise or instantaneous changes in pH.

Direct Selection Strategy for Isolating Aptamers with pH-Sensitive Binding Activity

An aptamer reagent that can switch its binding affinity in a pH-responsive manner would be highly valuable for many biomedical applications including imaging and drug delivery. Unfortunately, the discovery of such aptamers is difficult and only a few have been reported to date. Here we report the first experimental strategy for generating pH-responsive aptamers through direct selection. As an exemplar, we report streptavidin-binding aptamers that retain nanomolar affinity at pH 7.4 but exhibit a ∼100-fold decrease in affinity at pH 5.2. These aptamers were generated by incorporating a known streptavidin-binding DNA motif into an aptamer library and performing FACS-based screening at multiple pH conditions. Upon structural analysis, we found that one aptamer’s affinity-switching behavior is driven by a noncanonical G-A base-pair that controls its folding in a highly pH-dependent manner. We believe our strategy could be readily extended to other aptamer-target systems because it does not require a priori structural knowledge of the aptamer or the target.

Allosterically regulated DNA-based switches: From design to bioanalytical applications

DNA-based switches are structure-switching biomolecules widely employed in different bioanalytical applications. Of particular interest are DNA-based switches whose activity is regulated through the use of allostery. Allostery is a naturally occurring mechanism in which ligand binding induces the modulation and fine control of a connected biomolecule function as a consequence of changes in concentration of the effector. Through this general mechanism, many different allosteric DNA-based switches able to respond in a highly controlled way at the presence of a specific molecular effector have been engineered. Here, we discuss how to design allosterically regulated DNA-based switches and their applications in the field of molecular sensing, diagnostic and drug release.

In Vitro Selection of pH-Activated DNA Nanostructures

We report the first in vitro selection of DNA nanostructures that switch their conformation when triggered by change in pH. Previously, most pH-active nanostructures were designed using known pH-active motifs, such as the i-motif or the triplex structure. In contrast, we performed de novo selections starting from a random library and generated nanostructures that can sequester and release Mipomersen, a clinically approved antisense DNA drug, in response to pH change. We demonstrate extraordinary pH-selectivity, releasing up to 714-fold more Mipomersen at pH 5.2 compared to pH 7.5. Interestingly, none of our nanostructures showed significant sequence similarity to known pH-sensitive motifs, suggesting that they may operate via novel structure-switching mechanisms. We believe our selection scheme is general and could be adopted for generating DNA nanostructures for many applications including drug delivery, sensors and pH-active surfaces.