Ratio-Controlled Synthesis of CuNi Octahedra and Nanocubes with Enhanced Catalytic Activity

Strain Engineering of Unconventional Crystal-Phase Noble Metal Nanocatalysts

The crystal phase, alongside the composition, morphology, architecture, facet, size, and dimensionality, has been recognized as a critical factor influencing the properties of noble metal nanomaterials in various applications. In particular, unconventional crystal phases can potentially enable fascinating properties in noble metal nanomaterials. Recent years have witnessed notable advances in the phase engineering of nanomaterials (PEN). Within the accessible strategies for phase engineering, the effect of strain cannot be ignored because strain can act not only as the driving force of phase transition but also as the origin of the diverse physicochemical properties of the unconventional crystal phase. In this review, we highlight the development of unconventional crystal-phase noble metal nanomaterials within strain engineering. We begin with a short introduction of the unconventional crystal phase and strain effect in noble metal nanomaterials. Next, the correlations of the structure and performance of strain-engineered unconventional crystal-phase noble metal nanomaterials in electrocatalysis are highlighted, as well as the phase transitions of noble metal nanomaterials induced by the strain effect. Lastly, the challenges and opportunities within this rapidly developing field (i.e., the strain engineering of unconventional crystal-phase noble metal nanocatalysts) are discussed.

Electric double layer-mediated polarization field for optimizing photogenerated carrier dynamics and thermodynamics

Photocatalytic hydrogen evolution efficiency is limited due to unfavorable carrier dynamics and thermodynamic performance. Here, we propose to introduce electronegative molecules to build an electric double layer (EDL) to generate a polarization field instead of the traditional built-in electric field to improve carrier dynamics, and optimize the thermodynamics by regulating the chemical coordination of surface atoms. Based on theoretical simulation, we designed CuNi@EDL and applied it as the cocatalyst of semiconductor photocatalysts, finally achieved a hydrogen evolution rate of 249.6 mmol h^-1 g^-1 and remained stable after storing under environmental conditions for more than 300 days. The high H₂ yield is mainly due to the perfect work function, Fermi level and Gibbs free energy of hydrogen adsorption, improved light absorption ability, enhanced electron transfer dynamics, decreased HER overpotential and effective carrier transfer channel arose by EDL. Here, our work opens up new perspectives for the design and optimization of photosystems.

Colloidal synthesis of monodisperse trimetallic Pt-Fe-Ni nanocrystals and their enhanced electrochemical performances

Among the multi-metallic nanocatalysts, Pt-based alloy nanocrystals (NCs) have demonstrated promising performance in fuel cells and water electrolyzers. Herein, we demonstrate a facile colloidal synthesis of monodisperse trimetallic Pt-Fe-Ni alloy NCs through a co-reduction of metal precursors. The as-synthesized ternary NCs exhibit superior mass and specific activities toward oxygen reduction reaction (ORR), which are ∼2.8 and 5.6 times as high as those of the benchmark Pt/C catalyst, respectively. The ORR activity of the carbon-supported Pt-Fe-Ni nanocatalyst is persistently retained after the durability test. Owing to the incorporation of Fe and Ni atoms into the Pt lattice, the as-prepared trimetallic Pt-alloy electrocatalyst also manifestly enhances the electrochemical activity and durability toward the oxygen evolution reaction with a reduced overpotential when compared with that of the benchmark Pt/C (△η= 0.20 V, at 10 mA cm^-2). This synthetic strategy paves the way for improving the reactivity for a broad range of electrocatalytic applications.

Tailoring Morphology and Elemental Distribution of Cu-In Nanocrystals via Galvanic Replacement

The compositional and structural diversity of bimetallic nanocrystals (NCs) provides a superior tunability of their physico-chemical properties, making them attractive for a variety of applications, including sensing and catalysis. Nevertheless, the manipulation of the properties-determining features of bimetallic NCs still remains a challenge, especially when moving away from noble metals. In this work, we explore the galvanic replacement reaction (GRR) of In NCs and a copper molecular precursor to obtain Cu-In bimetallic NCs with an unprecedented variety of morphologies and distribution of the two metals. We obtain spherical Cu₁₁In₉ intermetallic and patchy phase-segregated Cu-In NCs, as well as dimer-like Cu-Cu₁₁In₉ and Cu-In NCs. In particular, we find that segregation of the two metals occurs as the GRR progresses with time or with a higher copper precursor concentration. We discover size-dependent reaction kinetics, with the smaller In NCs undergoing a slower transition across the different Cu-In configurations. We compare the obtained results with the bulk Cu-In phase diagram and, interestingly, find that the bigger In NCs stabilize the bulk-like Cu-Cu₁₁In₉ configuration before their complete segregation into Cu-In NCs. Finally, we also prove the utility of the new family of Cu-In NCs as model catalysts to elucidate the impact of the metal elemental distribution on the selectivity of these bimetallics toward the electrochemical CO₂ reduction reaction. Generally, we demonstrate that the GRR is a powerful synthetic approach beyond noble metal-containing bimetallic structures, yet that the current knowledge on this reaction is challenged when oxophilic and poorly miscible metal pairs are used.

Quantum Dots Compete at the Acme of MXene Family for the Optimal Catalysis

It is well known that two-dimensional (2D) MXene-derived quantum dots (MQDs) inherit the excellent physicochemical properties of the parental MXenes, as a Chinese proverb says, "Indigo blue is extracted from the indigo plant, but is bluer than the plant it comes from." Therefore, 0D QDs harvest larger surface-to-volume ratio, outstanding optical properties, and vigorous quantum confinement effect. Currently, MQDs trigger enormous research enthusiasm as an emerging star of functional materials applied to physics, chemistry, biology, energy conversion, and storage. Since the surface properties of small-sized MQDs include the type of surface functional groups, the functionalized surface directly determines their performance. As the Nobel Laureate Wolfgang Pauli says, "God made the bulk, but the surface was invented by the devil," and it is just on the basis of the abundant surface functional groups, there is lots of space to be thereof excavated from MQDs. We are witnessing such excellence and even more promising to be expected. Nowadays, MQDs have been widely applied to catalysis, whereas the related reviews are rarely reported. Herein, we provide a state-of-the-art overview of MQDs in catalysis over the past five years, ranging from the origin and development of MQDs, synthetic routes of MQDs, and functionalized MQDs to advanced characterization techniques. To explore the diversity of catalytic application and perspectives of MQDs, our review will stimulate more efforts toward the synthesis of optimal MQDs and thereof designing high-performance MQDs-based catalysts.

Heterometallic nanomaterials: activity modulation, sensing, imaging and therapy

Heterometallic nanomaterials (HMNMs) display superior physicochemical properties and stability to monometallic counterparts, accompanied by wider applications in the fields of catalysis, sensing, imaging, and therapy due to synergistic effects between multi-metals in HMNMs. So far, most reviews have mainly concentrated on introduction of their preparation approaches, morphology control and applications in catalysis, assay of heavy metal ions, and antimicrobial activity. Therefore, it is very important to summarize the latest investigations of activity modulation of HMNMs and their recent applications in sensing, imaging and therapy. Taking the above into consideration, we briefly underline appealing chemical/physical properties of HMNMs chiefly tailored through the sizes, shapes, compositions, structures and surface modification. Then, we particularly emphasize their widespread applications in sensing of targets (e.g. metal ions, small molecules, proteins, nucleic acids, and cancer cells), imaging (frequently involving photoluminescence, fluorescence, Raman, electrochemiluminescence, magnetic resonance, X-ray computed tomography, photoacoustic imaging, etc.), and therapy (e.g. radiotherapy, chemotherapy, photothermal therapy, photodynamic therapy, and chemodynamic therapy). Finally, we present an outlook on their forthcoming directions. This timely review would be of great significance for attracting researchers from different disciplines in developing novel HMNMs.

Amorphous Alloy Architectures in Pore Walls: Mesoporous Amorphous NiCoB Alloy Spheres with Controlled Compositions via a Chemical Reduction

Amorphous bimetallic borides are an emerging class of catalytic nanomaterial that has demonstrated excellent catalytic performance due to its glass-like structure, abundant unsaturated active sites, and synergistic electronic effects. However, the creation of mesoporous Earth-abundant bimetallic metal borides with tunable metal proportion remains a challenge. Herein, we develop a sophisticated and controllable dual-reducing agent strategy to synthesize the mesoporous nickel-cobalt boron (NiCoB) amorphous alloy spheres (AASs) with adjustable compositions by using a soft template-directed assembly approach. The selective use of tetrabutylphosphonium bromide (Bu₄PBr) is beneficial to generate well-defined mesopores because it both moderates the reduction rate by decreasing the reducibility of M²⁺ species and prevents the generation of soap bubbles. Our meso-Ni_10.0Co_74.5B_15.5 AASs generate the highest catalytic performance for the hydrolytic dehydrogenation of ammonia borane (AB). Its high performance is attributed to the combination of optimal synergistic effects between Ni, Co, and B as well as the high surface area and the good mass transport efficiency due to the open mesopores. This work describes a systematic approach for the design and synthesis of mesoporous bimetallic borides as efficient catalysts.

Ultra-sensitive hybrid diamond nanothermometer

Nitrogen-vacancy (NV) centers in diamond are promising quantum sensors because of their long spin coherence time under ambient conditions. However, their spin resonances are relatively insensitive to non-magnetic parameters such as temperature. A magnetic-nanoparticle-nanodiamond hybrid thermometer, where the temperature change is converted to the magnetic field variation near the Curie temperature, were demonstrated to have enhanced temperature sensitivity ($11{\rm{\,\,mK\,\,H}}{{\rm{z}}^{ - 1/2}}$) (Wang N, Liu G-Q and Leong W-H et al. Phys Rev X 2018; 8: 011042), but the sensitivity was limited by the large spectral broadening of ensemble spins in nanodiamonds. To overcome this limitation, here we show an improved design of a hybrid nanothermometer using a single NV center in a diamond nanopillar coupled with a single magnetic nanoparticle of copper-nickel alloy, and demonstrate a temperature sensitivity of $76{\rm{\,\,\mu K\,\,H}}{{\rm{z}}^{ - 1/2}}$. This hybrid design enables detection of 2 mK temperature changes with temporal resolution of 5 ms. The ultra-sensitive nanothermometer offers a new tool to investigate thermal processes in nanoscale systems.

Hollow porous Cu–Au particles with high catalytic activity for the reduction of 4-nitrophenol

A Cu-based bimetallic hollow structure can be effectively used to enhance the selective oxidation and electrocatalytic activity of a catalyst and to reduce its cost.

A mesoporous non-precious metal boride system: synthesis of mesoporous cobalt boride by strictly controlled chemical reduction

Generating high surface area mesoporous transition metal boride is interesting because the incorporation of boron atoms generates lattice distortions that lead to the formation of amorphous metal boride with unique properties in catalysis. Here we report the first synthesis of mesoporous cobalt boron amorphous alloy colloidal particles using a soft template-directed assembly approach. Dual reducing agents are used to precisely control the chemical reduction process of mesoporous cobalt boron nanospheres. The Earth-abundance of cobalt boride combined with the high surface area and mesoporous nanoarchitecture enables solar-energy efficient photothermal conversion of CO₂ into CO compared to non-porous cobalt boron alloys and commercial cobalt catalysts.

H2-Induced coalescence of Pt nanoparticles for the preparation of ultrathin Pt nanowires with high-density planar defects

Construction of planar defects within a metallic catalyst can significantly improve its catalytic performance. However, it remains a huge challenge to introduce planar defects during the synthesis of metallic catalysts. In this work, we have reported an effective approach for the preparation of Pt nanowires with high-density planar defects. The success of the approach mainly relies on the attaching and merging of small Pt nanoparticles at low temperatures with the assistance of H2. By comparing the catalytic activities of Pt nanowires with high-density planar defects and commercial Pt/C catalysts toward methanol oxidation reactions, we show that the existence of planar defects can markedly enhance the electrocatalytic performance of the Pt nanowires. The Pt nanowires of 2.0 nm in diameter show a factor of 6.1 enhancement in specific activity and a factor of 5.4 enhancement in mass activity, respectively, for this reaction, compared to the commercial Pt/C catalyst. The method developed in this work could be an effective route to introduce planar defects within Pt catalysts, endowing them with much enhanced catalytic properties.

Interface Engineering of Graphene-Supported Cu Nanoparticles Encapsulated by Mesoporous Silica for Size-Dependent Catalytic Oxidative Coupling of Aromatic Amines

In this study, graphene nanosheet-supported ultrafine Cu nanoparticles (NPs) encapsulated with thin mesoporous silica (Cu-GO@m-SiO₂) materials are fabricated with particle sizes ranging from 60 to 7.8 nm and are systematically investigated for the oxidative coupling of amines to produce biologically and pharmaceutically important imine derivatives. Catalytic activity remarkably increased from 76.5% conversion of benzyl amine for 60 nm NPs to 99.3% conversion and exclusive selectivity of N-benzylidene-1-phenylmethanamine for 7.8 nm NPs. The superior catalytic performance along with the outstanding catalyst stability of newly designed catalysts are attributed to the easy diffusion of organic molecules through the porous channel of mesoporous SiO₂ layers, which not only restricts the restacking of the graphene nanosheets but also prevents the sintering and leaching of metal NPs to an extreme extent through the nanoconfinement effect. Density functional theory calculations were performed to shed light on the reaction mechanism and to give insight into the trend of catalytic activity observed. The computed activation barriers of all elementary steps are very high on terrace Cu(111) sites, which dominate the large-sized Cu NPs, but are significantly lower on step sites, which are presented in higher density on smaller-sized Cu NPs and could explain the higher activity of smaller Cu-GO@m-SiO₂ samples. In particular, the activation barrier for the elementary coupling reaction is reduced from 139 kJ/mol on flat terrace Cu(111) sites to the feasible value of 94 kJ/mol at step sites, demonstrating the crucial role of the step site in facilitating the formation of secondary imine products.

Shape-controlled synthesis of Ni nanocrystals via a wet-chemistry strategy and their shape-dependent catalytic activity

We have synthesized Ni nanocrystals with different shapes via a facile wet-chemistry strategy, and investigated their shape-dependent performances.

Growth and shape stability of Cu-Ni core-shell nanoparticles: an atomistic perspective

The growth and shape stability of bi-metallic cubic Cu-Ni nanoparticles are studied using atomic-level simulations. Cubic nano-crystals coated with an ultra-thin Cu layer can be readily obtained when Ni cubic nanoparticles are used as the seeds. At elevated temperatures, the Cu seed with extending Ni branches preserves its shape compared to the Ni seed with extending Cu branches.

Tuning Ion Complexing To Rapidly Prepare Hollow Ag-Pt Nanowires with High Activity toward the Methanol Oxidization Reaction

Hollow Pt-based nanowires (NWs) have important applications in catalysis. Their preparation often involves a two-step process in which M (M=Ag, Pd, Co, Ni) NWs are prepared and subsequently subjected to galvanic reaction in solution containing a Pt precursor. It is challenging to achieve a simple one-step preparation, because the redox potential of Pt^IV /Pt or Pt^II /Pt to Pt is high, and therefore, Pt atoms always form first. This work demonstrates that an appropriate pH can decrease the redox potential of Pt^IV /Pt and allows the one-step preparation of high-quality hollow Pt-Ag NWs rapidly (10 min). Moreover, it is easy to realize large-scale preparation with this method. The NW composition can be adjusted readily to optimize their performance in the electrocatalytic methanol oxidization reaction (MOR). Compared with commercial Pt/C, NWs with appropriate Ag/Pt ratios exhibit high stability, activity, and CO tolerance ability.

Facile Synthesis of Cu/NiCu Electrocatalysts Integrating Alloy, Core-Shell, and One-Dimensional Structures for Efficient Methanol Oxidation Reaction

The design and development of low-cost Pt-free, high-active, and durable noble-metal-free electrocatalysts for methanol electrooxidation is highly desirable but remains a challenge. Herein, unique Cu/NiCu nanowires (NWs) integrating alloy, core-shell, and one-dimensional structures are prepared by a facile one-pot strategy. It is found that the Ni-Cu surface alloying structure can effectively change the charge distribution of the atomic configuration, the core-shell structure can be optimized with the usage of Ni and Cu, and the one-dimensional structure can effectively enhance the charge transfer between the electrode surface and the active sites, making the prepared NWs promising electrocatalysts. Detailed catalytic investigations showed that the obtained Cu/NiCu NWs exhibit an enhanced electrocatalytic performance for methanol oxidation reaction (MOR). The optimized Cu/NiCu NWs in this work show a mass current density of 867.1 mA mg_metal^-1 at 1.55 V (vs. RHE) for MOR, which is far higher than those of Ni-based previously reported electrocatalysts. This work opens up a new pathway for the design and engineering of noble-metal-free alloy electrocatalysts with enhanced activity and durability.

Single Crystalline Ultrathin Nickel-Cobalt Alloy Nanosheets Array for Direct Hydrazine Fuel Cells

Ultrathin 2D metal alloy nanomaterials have great potential applications but their controlled syntheses are limited to few noble metal based systems. Herein Ni x Co1-x alloy nanosheets with ultrathin (sub-3 nm) single-crystalline 2D structure are synthesized through a topochemical reduction method. Moreover, the optimized composition Ni0.6Co0.4 alloy nanosheets array exhibits excellent performances for hydrazine oxidation reaction and direct hydrazine fuel cells.

Integration of Quantum Confinement and Alloy Effect to Modulate Electronic Properties of RhW Nanocrystals for Improved Catalytic Performance toward CO2 Hydrogenation

The d-band center and surface negative charge density generally determine the adsorption and activation of CO₂, thus serving as important descriptors of the catalytic activity toward CO₂ hydrogenation. Herein, we engineered the d-band center and negative charge density of Rh-based catalysts by tuning their dimensions and introducing non-noble metals to form an alloy. During the hydrogenation of CO₂ into methanol, the catalytic activity of Rh₇₅W₂₅ nanosheets was 5.9, 4.0, and 1.7 times as high as that of Rh nanoparticles, Rh nanosheets, and Rh₇₃W₂₇ nanoparticles, respectively. Mechanistic studies reveal that the remarkable activity of Rh₇₅W₂₅ nanosheets is owing to the integration of quantum confinement and alloy effect. Specifically, the quantum confinement in one dimension shifts up the d-band center of Rh₇₅W₂₅ nanosheets, strengthening the adsorption of CO₂. Moreover, the alloy effect not only promotes the activation of CO₂ to form CO₂^δ- but also enhances the adsorption of intermediates to facilitate further hydrogenation of the intermediates into methanol.

Facile synthesis of Cu/Ni alloy nanospheres with tunable size and elemental ratio

We report a facile synthesis of copper/nickel (Cu/Ni) alloy nanospheres in high purity and with tunable, well-controlled sizes and elemental ratios.

A green synthesis of “naked” Pt and PtPd catalysts for highly efficient methanol electrooxidation

A green synthesis of “naked” Pt and PtPd catalysts with clean surfaces is proposed for highly efficient methanol electrooxidation.