Prodigious Effects of Concentration Intensification on Nanoparticle Synthesis: A High-Quality, Scalable Approach

Emergence and inversion of chirality in hierarchical assemblies of CdS nanocrystal fibers

Arranging semiconducting nanocrystals into ordered superstructures is a promising platform to study fundamental light-matter interactions and develop programmable optical metamaterials. We investigated how the geometrical arrangement of CdS nanocrystals in hierarchical assemblies affects chiroptical properties. To create these structures, we controlled the evaporation of a colloidal CdS nanocrystal solution between two parallel plates. We combined in situ microscopy and computational modeling to establish a formation mechanism involving the shear-induced alignment of nanocrystal fibers and the subsequent mechanical relaxation of the stretched fibers to form Raman noodle-type band textures. The high linear anisotropy in these films shares many similarities with cholesteric liquid crystals. The films deposited on top and bottom surfaces exhibit opposite chirality. The mechanistic insights from this study are consequential to enable future advances in the design and fabrication of programmable optical metamaterials for further development of polarization-based optics toward applications in sensing, hyperspectral imaging, and quantum information technology.

Temperature Dependence of the CdS Bandgap in the Extreme Confinement Regime

A non-empirical equation describing the effect of size on the temperature dependence of the optical bandgap of CdS (dEg/dT) is obtained on the basis of the Brus equation. Intriguingly, we find that dEg/dT diverges strongly from bulk values only within the "extreme confinement" (EC) regime. We conducted both experimental and theoretical investigations of the absorption spectra of CdS clusters and quantum dots as a function of temperature above room temperature. Our results show that the value of dEg/dT obtained from absorption spectra in the EC regime is 2.5 times higher than in the strong confinement regime. Notable ligand sensitivities are also observed for dEg/dT in the case of CdS clusters. Ab initio molecular dynamics simulations and density functional theory calculations reveal that thermal fluctuations are the crucial factor influencing the bandgap temperature coefficient. Our results help resolve some long-standing debates regarding the dEg/dT behavior of semiconductor quantum dots.

Ligand and solvent effects on the absorption spectra of CdS magic-sized clusters

The absorption spectra of congenetic wurtzite (WZ) and zincblende (ZB) CdS magic-sized clusters are investigated. We demonstrate that the exciton peak positions can be tuned by up to 500 meV by varying the strong coupling between X-type ligands and the semiconductor cores, while the addition of L-type ligands primarily affects cluster midgap states. When Z-type ligands are displaced by L-type ligands, red shifts in the absorption spectra are observed, despite the fact there is a small decrease in cluster size. Density functional theory calculations are used to explain these findings and they reveal the importance of Cd and S dangling bonds on the midgap states during the Z- to L-type ligand exchange process. Overall, ZB CdS clusters show higher chemical stability than WZ clusters but their optical properties exhibit greater sensitivity to the solvent. Conversely, WZ CdS clusters are not stable in a Lewis base-rich environment, resulting in various changes in their spectra. Our findings enable researchers to select capping ligands that modulate the optical properties of semiconductor clusters while maintaining precise control over their solvent interactions.

Thermodynamically Stable Colloidal Solids: Interfacial Thermodynamics from the Particle Size Distribution

True thermodynamic stability of a solid colloidal dispersion is generally unexpected, so much that thorough experimental validation of proposed stable systems remains incomplete. Such dispersions are under investigated and would be of interest due to their long-term stability and insensitivity to preparation pathway. We apply classical nucleation theory (CNT) to such colloidal systems, providing a relationship which links the size-dependent interfacial free energy density of the particles to their size distribution, and use this expression in the fitting of previously reported size distributions for putatively thermodynamically stable nanoparticles. Experimental data from a gold-thiol system exhibiting inverse coarsening or "digestive ripening" can be well-described in terms of a power-law dependence of the interfacial free energy γ on radius based on capacitive charging of the nanoparticles, going asr - 3 , as suggested by prior authors. Data from magnetite nanoparticles in highly basic solutions also can be well-fit using the CNT relation, but with γ going asr - 2 . Slightly better fits are possible if the power of the radius is non-integral, but we stress that more complex models of γ will require richer data sets to avoid the problem of overfitting. Some parameters of the fits are still robustly at odds with earlier models that implicitly assumed absolute thermodynamic stability: first, the extrapolated free energy density of the flat surface in these systems is small and positive, rather than strongly negative; second, the shape of the distributions indicates the solution phase to be supersaturated in monomer relative to the bulk, and thus that these two systems may only be metastable. For future work, we derive expressions for the important statistical thermodynamic and chemical parameters of the interface energy in terms of 1) the surfactant concentration, 2) the temperature dependence, and 3) the concentrations of particles in the tail of the distribution.

Enhanced photocatalytic hydrogen production activity of Janus Cu1.94S-ZnS spherical nanoheterostructures

Photocatalytic hydrogen evolution is one of the most promising approaches for efficient solar energy conversion. The light-harvesting ability and interfacial structure of heterostructured catalysts regulate the processes of photon injection and transfer, which further determines their photocatalytic performances. Here, we report a Janus Cu_1.94S-ZnS nano-heterostructured photocatalyst synthesized using a facile stoichiometrically limited cation exchange reaction. Djurleite Cu_1.94S and wurtzite ZnS share the anion skeleton, and the lattice mismatch between immiscible domains is ∼1.7%. Attributing to the high-quality interfacial structure, Janus Cu_1.94S-ZnS nanoheterostructures (NHs) show an enhanced photocatalytic hydrogen evolution rate of up to 0.918 mmol h^-1 g^-1 under full-spectrum irradiation, which is ∼38-fold and 17-fold more than those of sole Cu_1.94S and ZnS nanocrystals (NCs), respectively. The results indicate that cation exchange reaction is an efficient approach to construct well-ordered interfaces in hybrid photocatalysts, and it also demonstrates that reducing lattice mismatch and interfacial defects in hybrid photocatalysts is essential for enhancing their solar energy conversion performance.

Solvent manipulation of the pre-reduction metal-ligand complex and particle-ligand binding for controlled synthesis of Pd nanoparticles

Understanding how to control the nucleation and growth rates is crucial for designing nanoparticles with specific sizes and shapes. In this study, we show that the nucleation and growth rates are correlated with the thermodynamics of metal-ligand/solvent binding for the pre-reduction complex and the surface of the nanoparticle, respectively. To obtain these correlations, we measured the nucleation and growth rates by in situ small angle X-ray scattering during the synthesis of colloidal Pd nanoparticles in the presence of trioctylphosphine in solvents of varying coordinating ability. The results show that the nucleation rate decreased, while the growth rate increased in the following order, toluene, piperidine, 3,4-lutidine and pyridine, leading to a large increase in the final nanoparticle size (from 1.4 nm in toluene to 5.0 nm in pyridine). Using density functional theory (DFT), complemented by 31P nuclear magnetic resonance and X-ray absorption spectroscopy, we calculated the reduction Gibbs free energies of the solvent-dependent dominant pre-reduction complex and the solvent-nanoparticle binding energy. The results indicate that lower nucleation rates originate from solvent coordination which stabilizes the pre-reduction complex and increases its reduction free energy. At the same time, DFT calculations suggest that the solvent coordination affects the effective capping of the surface where stronger binding solvents slow the nanoparticle growth by lowering the number of active sites (not already bound by trioctylphosphine). The findings represent a promising advancement towards understanding the microscopic connection between the metal-ligand thermodynamic interactions and the kinetics of nucleation and growth to control the size of colloidal metal nanoparticles.

In situ thermal fabrication of copper sulfide-polymer hybrid nanostructures for tunable plasmon resonance

Here, a novel strategy for fabricating plasmonic-polymer hybrid nanostructures via the in situ thermal synthesis of copper sulfide (CuS) nanocrystals within poly(N-vinyl caprolactam)-based microgels is presented. In particular, the carboxyl groups inside the microgels enriched Cu²⁺ ions via electrostatic interaction, which further facilitated the nucleation inside the microgel matrix. The increase in nanocrystals' sizes with more added precursors indicated nanocrystals' continuous growth. The plasmon resonances in CuS nanocrystals were obtained due to the high-density free carriers in the covellite CuS. Both the sizes and the plasmon resonances of the as-synthesized CuS nanocrystals could be modulated by adjusting the amount of precursor. The fabricated hybrid nanostructures possessed good temperature responsivity, adjustable loading capacity, good colloidal stability, and pH dependent plasmon resonance. Furthermore, effective photothermal conversion performance was obtained under the illumination of a 980 nm NIR laser for controlling the phase transition of microgels, revealing promising potential in remotely controlled release of drugs.

Coupled Dynamics of Colloidal Nanoparticle Spreading and Self-Assembly at a Fluid-Fluid Interface

We investigated the physicochemical and transport phenomena governing the self-assembly of colloidal nanoparticles at the interface of two immiscible fluids. By combining in situ grazing-incidence small-angle X-ray scattering (GISAXS) with a temporal resolution of 200 ms and electron microscopy measurements, we gained new insights into the coupled effects of solvent spreading, nanoparticle assembly, and recession of the vapor-liquid interface on the morphology of the self-assembled thin films. We focus on oleate-passivated PbSe nanoparticles dispersed across an ethylene glycol subphase as a model system and demonstrate how solvent parameters such as surface tension, nanoparticle solubility, aromaticity, and polarity influence the mesoscale morphology of the nanoparticle superlattice. We discovered that a nanoparticle precursor monolayer film spreads in front of the bulk solution and influences the fluid spreading across the subphase. Improved understanding of the impact of kinetic phenomena (i.e., solvent spreading and evaporation) on the superlattice morphology is important to describe the formation mechanism and ultimately enable the assembly of high-quality superlattices with long-range order.

On-Demand Sonochemical Synthesis of Ultrasmall and Magic-Size CdSe Quantum Dots in Single-Phase and Emulsion Systems

The sonochemical synthesis of CdSe quantum dots (QDs) in a single-liquid bulk phase and in an emulsion-based system is presented. Reactions utilized cadmium oleate and trioctylphosphine selenide precursors and were monitored as a function of sonication time under controlled temperature conditions to isolate the effects of cavitation from those of bulk temperature changes. QD synthesis was found to be slow in the single-phase liquid system (i.e., 1-octadecene) but greatly accelerated in the dispersed system (i.e., emulsions of 1-octadecene in ethylene glycol). It is hypothesized that the emulsion system increases the cavitation efficiency while also delivering acoustic energy in closer proximity to the precursor molecules. The capacity of CdSe production in the emulsion system was found to be 3.8 g/(L h), which is comparable to the typical hot-injection synthesis of CdSe QDs and can likely be further optimized. While the single-phase solvent system was found to produce ultrasmall QDs that exhibit broadband white-light emission, the emulsion system was found to produce well-defined magic-size clusters (MSCs) with photoluminescence quantum yield as high as 34%. Differences in synthesis rate and product properties from the emulsion and single-phase systems were probed by X-ray diffraction, electron microscopy, UV-visible (vis) and photoluminescence spectroscopy, and small-angle X-ray scattering (SAXS). Finally, precise temporal control of the QD synthesis was demonstrated via on-off cycling of the ultrasound waves.

Facile synthesis to tune size, textural properties and fiber density of dendritic fibrous nanosilica for applications in catalysis and CO2 capture

Morphology-controlled nanomaterials such as silica play a critical role in the development of technologies for use in the fields of energy, environment (water and air pollution) and health. Since the discovery of Stöber's silica, followed by the discovery of mesoporous silica materials (MSNs) such as MCM-41 and SBA-15, a surge in the design and synthesis of nanosilica with various sizes, shapes, morphologies and textural properties (surface area, pore size and pore volume) has occurred. Dendritic fibrous nanosilica (DFNS; also known as KCC-1) is one of the recent discoveries in morphology-controlled nanomaterials. DFNS shows exceptional performance in large numbers of fields, including catalysis, gas capture, solar energy harvest, energy storage, sensors and biomedical applications. This material possesses a unique fibrous morphology, unlike the tubular porous structure of various conventional silica materials. It has a high surface area to volume ratio, with improved accessibility to the internal surface, tunable pore size and pore volume, controllable particle size and, importantly, improved stability. However, synthesis of DFNS with controllable size, textural properties and fiber density is still tricky because of several of the steps involved. This protocol provides a comprehensive step-wise description of DFNS synthesis and advice regarding how to control size, surface area, pore size, pore volume and fiber density. We also provide details of how to apply DFNS in catalysis and CO₂ capture. Detailed characterization protocols for these materials using scanning electron microscopy (SEM), transmission electron microscopy (TEM), nitrogen adsorption and thermal gravimetric analysis (TGA) studies are also provided.

Quantum Dots Synthesis Through Direct Laser Patterning: A Review

In this brief review the advances on Direct Laser Patterning (DLP) for the synthesis of photo-luminescent semiconductor quantum dots (QDs) belonging to II-VI groups, especially in solid state using laser-assisted conversion are reported and commented. The chemistry of the precursor synthesis is illustrated because it is a crucial step for the development of the direct laser patterning of QDs. In particular, the analysis of cadmium (bis)thiolate and cadmium xanthates precursors after thermal and laser treatment is examined, with a special focus on the optical properties of the formed QDs. The second part of the review examines how the laser parameters such as the wavelength and pulse duration may regulate the properties of the patterned QDs. The DLP technique does not require complex laser systems or the use of dangerous chemical post treatments, so it can be introduced as a potential method for the patterning of pixels in quantum dot light emitting diodes (QD-LEDs) for display manufacturing.

Chemically reversible isomerization of inorganic clusters

Structural transformations in molecules and solids have generally been studied in isolation, whereas intermediate systems have eluded characterization. We show that a pair of cadmium sulfide (CdS) cluster isomers provides an advantageous experimental platform to study isomerization in well-defined, atomically precise systems. The clusters coherently interconvert over an ~1-electron volt energy barrier with a 140-milli-electron volt shift in their excitonic energy gaps. There is a diffusionless, displacive reconfiguration of the inorganic core (solid-solid transformation) with first order (isomerization-like) transformation kinetics. Driven by a distortion of the ligand-binding motifs, the presence of hydroxyl species changes the surface energy via physisorption, which determines "phase" stability in this system. This reaction possesses essential characteristics of both solid-solid transformations and molecular isomerizations and bridges these disparate length scales.

Water-Dispersible Copper Sulfide Nanocrystals via Ligand Exchange of 1-Dodecanethiol

In colloidal Cu_2-x S nanocrystal synthesis, thiols are often used as organic ligands and the sulfur source, as they yield high-quality nanocrystals. However, thiol ligands on Cu_2-x S nanocrystals are difficult to exchange, limiting the applications of these nanocrystals in photovoltaics, biomedical sensing, and photocatalysis. Here, we present an effective and facile procedure to exchange native 1-dodecanethiol on Cu_2-x S nanocrystals by 3-mercaptopropionate, 11-mercaptoundecanoate, and S^2- in formamide under inert atmosphere. The product hydrophilic Cu_2-x S nanocrystals have excellent colloidal stability in formamide. Furthermore, the size, shape, and optical properties of the nanocrystals are not significantly affected by the ligand exchange. Water-dispersible Cu_2-x S nanocrystals are easily obtained by precipitation of the nanocrystals capped by S^2-, 3-mercaptopropionate, or 11-mercaptoundecanoate from formamide, followed by redispersion in water. Interestingly, the ligand exchange rates for Cu_2-x S nanocrystals capped with 1-dodecanethiol are observed to depend on the preparation method, being much slower for Cu_2-x S nanocrystals prepared through heating-up than through hot-injection synthesis protocols. XPS studies reveal that the differences in the ligand exchange rates are due to the surface chemistry of the Cu_2-x S nanocrystals, where the nanocrystals prepared via hot-injection synthesis have a less dense ligand layer due to the presence of trioctylphosphine oxide during synthesis. A model is proposed that explains the observed differences in the ligand exchange rates. The facile ligand exchange procedures reported here enable the use of high-quality colloidal Cu_2-x S nanocrystals prepared in the presence of 1-dodecanethiol in various applications.

Self-assembly of nickel: from nanoparticles to foils with tunable magnetic properties

Self-assembly of nickel from nanoparticles to nanowires and foils can be achieved by controlling the concentrations of sodium citrate during the electroless deposition process.

A general and rapid room-temperature synthesis approach for metal sulphide nanocrystals with tunable properties

Colloidal metal sulphide (MS) nanocrystals (NCs) have recently attracted considerable attention because of their tunable properties that can be exploited in various physical, chemical and biological applications. In this work, we present a novel and general method for synthesis of monodispersed binary (CuS, Ag2S, CdS, PbS, and SnS), ternary (Ag-In-S, Cu-In-S and Cu-Sn-S) and quaternary (Cu-Zn-Sn-S) MS NCs. The synthesis is conducted at room temperature, with an immediate crystallization process and up to 60 seconds of growth time, enabling rapid synthesis without external heating. For some of the ternary and quaternary NCs produced with relatively low crystallinity, we then carried out a "colloidal annealing" process to improve their crystallinity without changing their composition. Moreover, we show that the morphology and optical properties of the NCs can be tuned by varying the concentration of precursors and reaction time. The shape evolution and photoluminescence of particular MS NCs were also studied. These results not only provide insights into the growth mechanisms of MS NCs, but also yield a generalized, low cost, and potentially scalable method to fabricate them.

Sustainable scalable synthesis of sulfide nanocrystals at low cost with an ionic liquid sulfur precursor

Increasing the sustainability of nanocrystals is crucial to their application and the protection of the environment. Sulfur precursors for their synthesis are commonly obtained through multiple steps from H₂S, only to be converted back to H₂S during the synthesis of the nanocrystals. This convoluted process requires energy, reduces yields, increases waste and auxiliaries, and complicates recycling. Using H₂S directly could drastically improve sustainability, but is prevented by toxicity and handling. We here show that H₂S is stabilized by reaction with oleylamine (the most common and versatile ligand in nanoparticle synthesis) to form an ionic liquid precursor that addresses all major principles of green chemistry: it is made in one exothermic step, it leaves the reaction yielding a safer product and allowing the separate recycling of the precursors, and it produces high quality nanocrystals with high yields (sulfur yield > 70%) and concentrations (90 g L⁻¹) in ambient conditions.

Developing sustainable and scalable nanocrystal syntheses is challenging but necessary for future technologies and the environment. Here, the authors show that using an ionic liquid to stabilize a highly reactive precursor can fulfill the major aims of sustainable nanocrystal synthesis, including high yields, energy efficiency, atom economy, and recyclability.

Porous cobalt sulfide hollow nanospheres with tunable optical property for magnetic resonance imaging-guided photothermal therapy

Transition-metal chalcogenides with an imaging element and tunable optical property are strongly desired as ideal high-efficiency photothermal theranostic agents to diagnose and eliminate tumors. Herein, we report on a one-pot solvothermal strategy to synthesize various porous cobalt sulfide hollow nanospheres (PCSH NSs) and elucidate the relation between PCSH NSs and their optical absorption as a guide to obtain optimal photothermal therapy (PTT) agents. After PEG modification, PEG-PCSH NSs show superexcellent photothermal conversion efficiency (∼70.1%) which is higher than that of binary transition-metal chalcogenides materials reported to date. A low dose (100 μL, 25 ppm) could completely ablate tumors under an 808 nm laser power of 0.7 W cm-2, reducing in vivo long-term residual agent content and thus lowering the possibility of side effects. Additionally, they also exhibit excellent biocompatibility, good photostability and utility for magnetic resonance imaging. Our results indicate that PCSH NSs can be considered as an outstanding PTT agent and give guidance towards the design of other photothermal theranostic agents.

Colloidal Quantum Nanostructures: Emerging Materials for Display Applications

Colloidal semiconductor nanocrystals (SCNCs) or, more broadly, colloidal quantum nanostructures constitute outstanding model systems for investigating size and dimensionality effects. Their nanoscale dimensions lead to quantum confinement effects that enable tuning of their optical and electronic properties. Thus, emission color control with narrow photoluminescence spectra, wide absorbance spectra, and outstanding photostability, combined with their chemical processability through control of their surface chemistry leads to the emergence of SCNCs as outstanding materials for present and next-generation displays. In this Review, we present the fundamental chemical and physical properties of SCNCs, followed by a description of the advantages of different colloidal quantum nanostructures for display applications. The open challenges with respect to their optical activity are addressed. Both photoluminescent and electroluminescent display scenarios utilizing SCNCs are described.

Surface chemistry of cadmium sulfide magic-sized clusters: a window into ligand-nanoparticle interactions

Optoelectronic properties of nanoparticles are intimately coupled to the complex physiochemical interplay between the inorganic core and the organic ligand shell. Magic-sized clusters, which are predominately surface atoms, provide a promising avenue to clarify these critical surface interactions. Whereas these interactions impact the surface of both nanoparticles and magic-sized clusters, we show here that only clusters manifest a shift in the excitonic peak by up to 0.4 eV upon solvent or ligand treatment. These results highlight the utility of the clusters as a probe of ligand-surface interactions.

Mesophase Formation Stabilizes High-Purity Magic-Sized Clusters

Magic-sized clusters (MSCs) are renowned for their identical size and closed-shell stability that inhibit conventional nanoparticle (NP) growth processes. Though MSCs have been of increasing interest, understanding the reaction pathways toward their nucleation and stabilization is an outstanding issue. In this work, we demonstrate that high concentration synthesis (1000 mM) promotes a well-defined reaction pathway to form high-purity MSCs (>99.9%). The MSCs are resistant to typical growth and dissolution processes. On the basis of insights from in situ X-ray scattering analysis, we attribute this stability to the accompanying production of a large (>100 nm grain size), hexagonal organic-inorganic mesophase that arrests growth of the MSCs and prevents NP growth. At intermediate concentrations (500 mM), the MSC mesophase forms, but is unstable, resulting in NP growth at the expense of the assemblies. These results provide an alternate explanation for the high stability of MSCs. Whereas the conventional mantra has been that the stability of MSCs derives from the precise arrangement of the inorganic structures (i.e., closed-shell atomic packing), we demonstrate that anisotropic clusters can also be stabilized by self-forming fibrous mesophase assemblies. At lower concentration (<200 mM or >16 acid-to-metal), MSCs are further destabilized and NPs formation dominates that of MSCs. Overall, the high concentration approach intensifies and showcases inherent concentration-dependent surfactant phase behavior that is not accessible in conventional (i.e., dilute) conditions. This work provides not only a robust method to synthesize, stabilize, and study identical MSC products but also uncovers an underappreciated stabilizing interaction between surfactants and clusters.

Synthesis and characterization of AgGaS2 nanoparticles: a study of growth and fluorescence

Silver gallium sulfide nanocrystals demonstrate tunability for trap-state emission (650 nm) or band gap fluorescence (460 nm).

Colloidal nanoparticle size control: experimental and kinetic modeling investigation of the ligand-metal binding role in controlling the nucleation and growth kinetics

Despite the major advancements in colloidal metal nanoparticles synthesis, a quantitative mechanistic treatment of the ligand's role in controlling their size remains elusive. We report a methodology that combines in situ small angle X-ray scattering (SAXS) and kinetic modeling to quantitatively capture the role of ligand-metal binding (with the metal precursor and the nanoparticle surface) in controlling the synthesis kinetics. We demonstrate that accurate extraction of the kinetic rate constants requires using both, the size and number of particles obtained from in situ SAXS to decouple the contributions of particle nucleation and growth to the total metal reduction. Using Pd acetate and trioctylphosphine in different solvents, our results reveal that the binding of ligands with both the metal precursor and nanoparticle surface play a key role in controlling the rates of nucleation and growth and consequently the final size. We show that the solvent can affect the metal-ligand binding and consequently ligand coverage on the nanoparticles surface which has a strong effect on the growth rate and final size (1.4 nm in toluene and 4.3 nm in pyridine). The proposed kinetic model quantitatively predicts the effects of varying the metal concentration and ligand/metal ratio on nanoparticle size for our work and literature reports. More importantly, we demonstrate that the final size is exclusively determined by the nucleation and growth kinetics at early times and not how they change with time. Specifically, the nanoparticle size in this work and many literature reports can be predicted using a single, model independent kinetic descriptor, (growth-to-nucleation rate ratio)^1/3, despite the different metals and synthetic conditions. The proposed model and kinetic descriptor could serve as powerful tools for the design of colloidal nanoparticles with specific sizes.

Process Principles for Large-Scale Nanomanufacturing

Nanomanufacturing—the fabrication of macroscopic products from well-defined nanoscale building blocks—in a truly scalable and versatile manner is still far from our current reality. Here, we describe the barriers to large-scale nanomanufacturing and identify routes to overcome them. We argue for nanomanufacturing systems consisting of an iterative sequence of synthesis/assembly and separation/sorting unit operations, analogous to those used in chemicals manufacturing. In addition to performance and economic considerations, phenomena unique to the nanoscale must guide the design of each unit operation and the overall process flow. We identify and discuss four key nanomanufacturing process design needs: (a) appropriately selected process break points, (b) synthesis techniques appropriate for large-scale manufacturing, (c) new structure- and property-based separations, and (d) advances in stabilization and packaging.

Nanostructured CoP: An efficient catalyst for degradation of organic pollutants by activating peroxymonosulfate

A new catalyst system of CoP/peroxymonosulfate (PMS) is presented, which achieved significant improvement in catalytic activity. Nanostructured CoP, obtained by a simple solid-state reaction, exhibited dramatic catalytic activity with 97.2% degradation of orange II of 100ppm within 4min. Moreover, the high efficiency could be reached for other phenolic pollutants, i.e., phenol and 4-chlorophenol. The reaction rate is much higher than the most reported catalysts. Effect of parameters on catalytic activity of the catalyst was studied in detail. Notably, initial pH of the solution had a slight negative effect on the catalytic performance over the pH range 4.07-10.92, suggesting that CoP has the great adaptability of pH. CoP/PMS demonstrated excellent anti-interference performance toward anions (Cl^-, NO₃^-, and HCO₃^-). In addition, the pathway of degradation of orange II is proposed by analyzing its intermediates. Based on the XPS spectra of CoP, the identification of the reactive species (OH and SO₄^-) by electron paramagnetic resonance (EPR) analysis and quenching tests, a possible mechanism for activation of PMS by CoP was proposed. Considering the dramatic catalytic activity, a wide range of pH catalyst suited, CoP is believed to provide robust support for the promising industrial application of AOPs.

Compound Copper Chalcogenide Nanocrystals

This review captures the synthesis, assembly, properties, and applications of copper chalcogenide NCs, which have achieved significant research interest in the last decade due to their compositional and structural versatility. The outstanding functional properties of these materials stems from the relationship between their band structure and defect concentration, including charge carrier concentration and electronic conductivity character, which consequently affects their optoelectronic, optical, and plasmonic properties. This, combined with several metastable crystal phases and stoichiometries and the low energy of formation of defects, makes the reproducible synthesis of these materials, with tunable parameters, remarkable. Further to this, the review captures the progress of the hierarchical assembly of these NCs, which bridges the link between their discrete and collective properties. Their ubiquitous application set has cross-cut energy conversion (photovoltaics, photocatalysis, thermoelectrics), energy storage (lithium-ion batteries, hydrogen generation), emissive materials (plasmonics, LEDs, biolabelling), sensors (electrochemical, biochemical), biomedical devices (magnetic resonance imaging, X-ray computer tomography), and medical therapies (photochemothermal therapies, immunotherapy, radiotherapy, and drug delivery). The confluence of advances in the synthesis, assembly, and application of these NCs in the past decade has the potential to significantly impact society, both economically and environmentally.

Assembly and Electronic Applications of Colloidal Nanomaterials

Artificial solids and thin films assembled from colloidal nanomaterials give rise to versatile properties that can be exploited in a range of technologies. In particular, solution-based processes allow for the large-scale and low-cost production of nanoelectronics on rigid or mechanically flexible substrates. To achieve this goal, several processing steps require careful consideration, including nanomaterial synthesis or exfoliation, purification, separation, assembly, hybrid integration, and device testing. Using a ubiquitous electronic device - the field-effect transistor - as a platform, colloidal nanomaterials in three electronic material categories are reviewed systematically: semiconductors, conductors, and dielectrics. The resulting comparative analysis reveals promising opportunities and remaining challenges for colloidal nanomaterials in electronic applications, thereby providing a roadmap for future research and development.

Modeling of the formation kinetics and size distribution evolution of II–VI quantum dots

A population balance model describes the formation of II–VI semiconductor nanocrystals and predicts experimentally observed properties of the nanocrystal size distribution.

Effect of composition and coating on the interparticle interactions and magnetic hardness of MFe2O4 (M = Fe, Co, Zn) nanoparticles

Magnetic measurements and Raman spectroscopy of CoFe₂O₄ particles of 4.4 nm mean size are shown as an illustration.

Hcp cobalt nanocrystals with high magnetic anisotropy prepared by easy one-pot synthesis

Herein we describe the first synthesis of pure mono-disperse spherical hcp-nanocrystals ferromagnetic at room temperature. Our strategy, based on the simple combination of oleylamine and ClCo(PPh₃)₃, allows the one-pot synthesis of size-controlled hcp-nanocrystals. The size and shape of the nanocrystals can be tuned by varying the reaction time or the concentration.

Towards bulk syntheses of nanomaterials: a homeostatically supersaturated synthesis of polymer-like Bi2S3 nanowires with nearly 100% yield and no injection

This paper reports the implementation of a one-pot strategy for the synthesis of polymer-like Bi₂S₃ nanowires from supersaturated precursors.