Revealing the Formation of Copper Nanoparticles from a Homogeneous Solid Precursor by Electron Microscopy

An In Situ TEM Study of the Influence of Water Vapor on Reduction of Nickel Phyllosilicate - Retarded Growth of Metal Nanoparticles at Higher Rates

Unavoidable water formation during the reduction of solid catalyst precursors has long been known to influence the nanoparticle size and dispersion in the active catalyst. This in situ transmission electron microscopy study provides insight into the influence of water vapor at the nanoscale on the nucleation and growth of the nanoparticles (2-16 nm) during the reduction of a nickel phyllosilicate catalyst precursor under H2/Ar gas at 700 °C. Water suppresses and delays nucleation, but counterintuitively increases the rate of particle growth. After full reduction is achieved, water vapor significantly enhances Ostwald ripening which in turn increases the likelihood of particle coalescence. This study proposes that water leads to formation of mobile nickel hydroxide species, leading to faster rates of particle growth during and after reduction.

Investigation of Ni-Cu-acid multifunctional synergism in NiCu-phyllosilicate catalysts toward the 1,4-butynediol hydrogenation to 1,4-butanediol

We studied the Ni-Cu-acid multifunctional synergism in NiCu-phyllosilicate catalysts toward 1,4-butynediol hydrogenation to 1,4-butanediol by varying the reduction temperature, which can activate different bimetal and support interactions. Compared with a monometallic Ni phyllosilicate (phy), which only showed one type of metal species when reduced at ∼750 °C, there are three types of metal species for the bimetallic Ni-Cu-phyllosilicate derived catalysts, namely Cuphy, differentiated Ni, and Niphy. Thorough structure-activity/selectivity correlation investigations showed that, although the Ni9Cu1-P catalyst matrix can produce tiny amounts of differentiated Ni0 species under the induction of reduced Cu0 at R250 condition, it could not form Ni-Cu bimetallic interactions for the collaborative hydrogenation of 1,4-butynediol, and the product stays in the semi hydrogenated state. When the reduction temperature is raised to 500 °C, stable Ni-Cu alloy active sites exist, accompanied by the strong metal support interaction and metal acid effect derived from the intimate contact between the extracted metal sites and the surviving functional phyllosilicate support; these functionalities yield a supreme hydrogenation performance of the R500 sample with a 1,4-butanediol yield larger than 91.2%.

In Situ Kinetic Observations on Crystal Nucleation and Growth

Nucleation and growth are critical steps in crystallization, which plays an important role in determining crystal structure, size, morphology, and purity. Therefore, understanding the mechanisms of nucleation and growth is crucial to realize the controllable fabrication of crystalline products with desired and reproducible properties. Based on classical models, the initial crystal nucleus is formed by the spontaneous aggregation of ions, atoms, or molecules, and crystal growth is dependent on the monomer's diffusion and the surface reaction. Recently, numerous in situ investigations on crystallization dynamics have uncovered the existence of nonclassical mechanisms. This review provides a summary and highlights the in situ studies of crystal nucleation and growth, with a particular emphasis on the state-of-the-art research progress since the year 2016, and includes technological advances, atomic-scale observations, substrate- and temperature-dependent nucleation and growth, and the progress achieved in the various materials: metals, alloys, metallic compounds, colloids, and proteins. Finally, the forthcoming opportunities and challenges in this fascinating field are discussed.

Copper Phyllosilicates-Derived Catalysts in the Production of Alcohols from Hydrogenation of Carboxylates, Carboxylic Acids, Carbonates, Formyls, and CO2: A Review

Copper phyllosilicates-derived catalysts (CuPS-cats) have been intensively explored in the past two decades due to their promising activity in carbonyls hydrogenation. However, CuPS-cats have not been completely reviewed. This paper focuses on the aspects concerning CuPS-cats from synthesis methods, effects of preparation conditions, and dopant to catalytic applications of CuPS-cats. The applications of CuPS-cats include the hydrogenation of carboxylates, carboxylic acids, carbonates, formyls, and CO2 to their respective alcohols. Besides, important factors such as the Cu dispersion, Cu+ and Cu0 surface areas, particles size, interaction between Cu and supports and dopants, morphologies, and spatial effect on catalytic performance of CuPS-cats are discussed. The deactivation and remedial actions to improve the stability of CuPS-cats are summarized. It ends up with the challenges and prospective by using this type of catalyst.

Developments and advances in in situ transmission electron microscopy for catalysis research

Recent developments and advances in in situ TEM have raised the possibility to study every step during the catalysts' lifecycle. This review discusses the current state, opportunities and challenges of in situ TEM in the realm of catalysis.

Hydrophobic Copper Catalysts Derived from Copper Phyllosilicates in the Hydrogenation of Levulinic Acid to γ-Valerolactone

A reduction-silylation-reduction method was developed to synthesize hydrophobic Cu catalysts derived from Cu phyllosilicates (CuPS). Triethoxy(octyl)silane (OTS) was used as the coupling agent. The OTS-grafted, reduced CuPS catalysts were applied in the hydrogenation of levulinic acid (LA) to γ-valerolactone (GVL). The most promising catalyst was synthesized by reducing CuPS at a high temperature (350 °C for 3 h), followed by OTS grafting, and then by repeating the previous reduction step. High LA conversion (95.7%), GVL yield (85.2%), and stability (3 cycles with a 7.5% loss of initial activity) were obtained at a mild reaction condition (130 °C with a H₂ pressure of 12 bar). A high reduction temperature not only leads to a low oxidation state of Cu species but also suppresses the formation of silylation-induced acids. Moreover, the intrinsic activity of a reduced CuPS catalyst was nearly intact after subjecting to silylation and the second reduction treatment.

Heterogeneous catalysis by ultra-small bimetallic nanoparticles surpassing homogeneous catalysis for carbon-carbon bond forming reactions

Palladium catalyzed cross-coupling reactions represent a significant advancement in contemporary organic synthesis as these reactions are of strategic importance in the area of pharmaceutical drug discovery and development. Supported palladium-based catalysts are highly sought-after in carbon-carbon bond forming catalytic processes to ensure catalyst recovery and reuse while preventing product contamination. This paper reports the development of heterogeneous Pd-based bimetallic catalysts supported on fumed silica that have high activity and selectivity matching those of homogeneous catalysts, eliminating the catalyst's leaching and sintering and allowing efficient recycling of the catalysts. Palladium and base metal (Cu, Ni or Co) contents of less than 1.0 wt% loading are deposited on a mesoporous fumed silica support (surface area SABET = 350 m2 g-1) using strong electrostatic adsorption (SEA) yielding homogeneously alloyed nanoparticles with an average size of 1.3 nm. All bimetallic catalysts were found to be highly active toward Suzuki cross-coupling (SCC) reactions with superior activity and stability for the CuPd/SiO2 catalyst. A low CuPd/SiO2 loading (Pd: 0.3 mol%) completes the conversion of bromobenzene and phenylboronic acid to biphenyl in 30 minutes under ambient conditions in water/ethanol solvent. In contrast, monometallic Pd/SiO2 (Pd: 0.3 mol%) completes the same reaction in three hours under the same conditions. The combination of Pd with the base metals helps in retaining the Pd0 status by charge donation from the base metals to Pd, thus lowering the activation energy of the aryl halide oxidative addition step. Along with its exceptional activity, CuPd/SiO2 exhibits excellent recycling performance with a turnover frequency (TOF) of 280 000 h-1 under microwave reaction conditions at 60 °C. Our study demonstrates that SEA is an excellent synthetic strategy for depositing ultra-small Pd-based bimetallic nanoparticles on porous silica for SCC. This avenue not only provides highly active and sintering-resistant catalysts but also significantly lowers Pd contents in the catalysts without compromising catalytic activity, making the catalysts very practical for large-scale applications.

Growth of Supported Gold Nanoparticles in Aqueous Phase Studied by in Situ Transmission Electron Microscopy

Nanoparticle growth has long been a significant challenge in nanotechnology and catalysis, but the lack of knowledge on the fundamental nanoscale aspects of this process has made its understanding and prediction difficult, especially in a liquid phase. In this work, we successfully used liquid-phase transmission electron microscopy (LP-TEM) to image this process in real time at the nanometer scale, using an Au/TiO₂ catalyst in the presence of NaCl_(aq) as a case study. In situ LP-TEM clearly showed that the growth of Au nanoparticles occurred through a form of Ostwald ripening, whereby particles grew or disappeared, probably via monomer transfer, without clear correlation to particle size in contrast to predictions of classical Ostwald ripening models. In addition, the existence of a significant fraction of inert particles that neither grew nor shrank was observed. Furthermore, in situ transmission electron microscopy (TEM) showed that particle shrinkage was sudden and seemed a stochastic process, while particle growth by monomer attachment was slow and likely the rate-determining step for sintering in this system. Identification and understanding of these individual nanoparticle events are critical for extending the accuracy and predictive power of Ostwald ripening models for nanomaterials.

In Situ Observation of Atomic Redistribution in Alloying Gold-Silver Nanorods

The catalytic performance and optical properties of bimetallic nanoparticles critically depend on the atomic distribution of the two metals in the nanoparticles. However, at elevated temperatures, during light-induced heating, or during catalysis, atomic redistribution can occur. Measuring such metal redistribution in situ is challenging, and a single experimental technique does not suffice. Furthermore, the availability of a well-defined nanoparticle system has been an obstacle for a systematic investigation of the key factors governing the atomic redistribution. In this study, we follow metal redistribution in precisely tunable, single-crystalline Au-core, Ag-shell nanorods in situ, both at a single particle and an ensemble-averaged level, by combining in situ transmission electron spectroscopy with in situ extended X-ray absorption fine structure validated by ex situ measurements. We show that the kinetics of atomic redistribution in Au-Ag nanoparticles depend on the metal composition and particle volume, such that a higher Ag content or a larger particle size led to significantly slower metal redistribution. We developed a simple theoretical model based on Fick's first law that can correctly predict the composition- and size-dependent alloying behavior in Au-Ag nanoparticles, as observed experimentally.

Characterization techniques for nanoparticles: comparison and complementarity upon studying nanoparticle properties

Nanostructures have attracted huge interest as a rapidly growing class of materials for many applications. Several techniques have been used to characterize the size, crystal structure, elemental composition and a variety of other physical properties of nanoparticles. In several cases, there are physical properties that can be evaluated by more than one technique. Different strengths and limitations of each technique complicate the choice of the most suitable method, while often a combinatorial characterization approach is needed. In addition, given that the significance of nanoparticles in basic research and applications is constantly increasing, it is necessary that researchers from separate fields overcome the challenges in the reproducible and reliable characterization of nanomaterials, after their synthesis and further process (e.g. annealing) stages. The principal objective of this review is to summarize the present knowledge on the use, advances, advantages and weaknesses of a large number of experimental techniques that are available for the characterization of nanoparticles. Different characterization techniques are classified according to the concept/group of the technique used, the information they can provide, or the materials that they are destined for. We describe the main characteristics of the techniques and their operation principles and we give various examples of their use, presenting them in a comparative mode, when possible, in relation to the property studied in each case.

Recent progress in improving the stability of copper-based catalysts for hydrogenation of carbon–oxygen bonds

Five different strategies to enhance the stability of Cu-based catalysts for hydrogenation of C–O bonds are summarized in this review.

Synthesis of higher alcohols by CO hydrogenation on a K-promoted Ni–Mo catalyst derived from Ni–Mo phyllosilicate

A K_0.5-(Ni₁Mo_0.25)Si-PS catalyst derived from Ni–Mo phyllosilicate exhibits excellent catalytic performance and stability for the synthesis of HAs by CO hydrogenation relative to the catalysts prepared by conventional co-deposition and wetness impregnation methods.

Autocatalytic surface reduction and its role in controlling seed-mediated growth of colloidal metal nanocrystals

The growth of colloidal metal nanocrystals typically involves an autocatalytic process, in which the salt precursor adsorbs onto the surface of a growing nanocrystal, followed by chemical reduction to atoms for their incorporation into the nanocrystal. Despite its universal role in the synthesis of colloidal nanocrystals, it is still poorly understood and controlled in terms of kinetics. Through the use of well-defined nanocrystals as seeds, including those with different types of facets, sizes, and internal twin structure, here we quantitatively analyze the kinetics of autocatalytic surface reduction in an effort to control the evolution of nanocrystals into predictable shapes. Our kinetic measurements demonstrate that the activation energy barrier to autocatalytic surface reduction is highly dependent on both the type of facet and the presence of twin boundary, corresponding to distinctive growth patterns and products. Interestingly, the autocatalytic process is effective not only in eliminating homogeneous nucleation but also in activating and sustaining the growth of octahedral nanocrystals. This work represents a major step forward toward achieving a quantitative understanding and control of the autocatalytic process involved in the synthesis of colloidal metal nanocrystals.

Optical and Optoelectronic Property Analysis of Nanomaterials inside Transmission Electron Microscope

In situ transmission electron microscopy (TEM) allows one to investigate nanostructures at high spatial resolution in response to external stimuli, such as heat, electrical current, mechanical force and light. This review exclusively focuses on the optical, optoelectronic and photocatalytic studies inside TEM. With the development of TEMs and specialized TEM holders that include in situ illumination and light collection optics, it is possible to perform optical spectroscopies and diverse optoelectronic experiments inside TEM with simultaneous high resolution imaging of nanostructures. Optical TEM holders combining the capability of a scanning tunneling microscopy probe have enabled nanomaterial bending/stretching and electrical measurements in tandem with illumination. Hence, deep insights into the optoelectronic property versus true structure and its dynamics could be established at the nanometer-range precision thus evaluating the suitability of a nanostructure for advanced light driven technologies. This report highlights systems for in situ illumination of TEM samples and recent research work based on the relevant methods, including nanomaterial cathodoluminescence, photoluminescence, photocatalysis, photodeposition, photoconductivity and piezophototronics.

Quantitative Analysis of Different Formation Modes of Platinum Nanocrystals Controlled by Ligand Chemistry

Well-defined metal nanocrystals play important roles in various fields, such as catalysis, medicine, and nanotechnology. They are often synthesized through kinetically controlled process in colloidal systems that contain metal precursors and surfactant molecules. The chemical functionality of surfactants as coordinating ligands to metal ions however remains a largely unsolved problem in this process. Understanding the metal-ligand complexation and its effect on formation kinetics at the molecular level is challenging but essential to the synthesis design of colloidal nanocrystals. Herein we report that spontaneous ligand replacement and anion exchange control the form of coordinated Pt-ligand intermediates in the system of platinum acetylacetonate [Pt(acac)₂], primary aliphatic amine, and carboxylic acid ligands. The formed intermediates govern the formation mode of Pt nanocrystals, leading to either a pseudo two-step or a one-step mechanism by switching on or off an autocatalytic surface growth. This finding shows the importance of metal-ligand complexation at the prenucleation stage and represents a critical step forward for the designed synthesis of nanocrystal-based materials.

Toward a Quantitative Understanding of the Reduction Pathways of a Salt Precursor in the Synthesis of Metal Nanocrystals

Despite the pivotal role played by the reduction of a salt precursor in the synthesis of metal nanocrystals, it is still unclear how the precursor is reduced. The precursor can be reduced to an atom in the solution phase, followed by its deposition onto the surface of a growing nanocrystal. Alternatively, the precursor can adsorb onto the surface of a growing nanocrystal, followed by reduction through an autocatalytic process. With Pd as an example, here we demonstrate that the pathway has a correlation with the reduction kinetics involved. Our quantitative analyses of the reduction kinetics of PdCl₄^2- and PdBr₄^2- by ascorbic acid at room temperature in the absence and presence of Pd nanocubes, respectively, suggest that PdCl₄^2- was reduced in the solution phase while PdBr₄^2- was reduced on the surface of a growing nanocrystal. Our results also demonstrate that the reduction pathway of PdBr₄^2- by ascorbic acid could be switched from surface to solution by raising the reaction temperature.

Copper nanoparticles socketed in situ into copper phyllosilicate nanotubes with enhanced performance for chemoselective hydrogenation of esters

Copper nanoparticles exsoluted in situ under a reducing atmosphere at elevated temperatures are socketed into the parent copper phyllosilicate nanotubes and exhibit excellent catalytic performance and superior stability for the selective hydrogenation of various esters to alcohols.

On the role of the gas environment, electron-dose-rate, and sample on the image resolution in transmission electron microscopy

The introduction of gaseous atmospheres in transmission electron microscopy offers the possibility of studying materials in situ under chemically relevant environments. The presence of a gas environment can degrade the resolution. Surprisingly, this phenomenon has been shown to depend on the electron-dose-rate. In this article, we demonstrate that both the total and areal electron-dose-rates work as descriptors for the dose-rate-dependent resolution and are related through the illumination area. Furthermore, the resolution degradation was observed to occur gradually over time after initializing the illumination of the sample and gas by the electron beam. The resolution was also observed to be sensitive to the electrical conductivity of the sample. These observations can be explained by a charge buildup over the electron-illuminated sample area, caused by the beam–gas–sample interaction, and by a subsequent sample motion induced by electrical capacitance in the sample.