Functional Choline Phosphate Polymers

Embedding Thiols into Choline Phosphate Polymer Zwitterions

The compositional scope of polymer zwitterions has grown significantly in recent years and now offers designer synthetic materials that are broadly applicable across numerous areas, including supracolloidal structures, electronic materials interfaces, and macromolecular therapeutics. Among recent developments in polymer zwitterion syntheses are those that allow insertion of reactive functionality directly into the zwitterionic moiety, yielding new monomer and polymer structures that hold potential for maximizing the impact of zwitterions on the macromolecular materials chemistry field. This manuscript describes the preparation of zwitterionic choline phosphate (CP) methacrylates containing either aromatic or aliphatic thiols embedded directly into the zwitterionic moiety. The polymerization of these functional CP methacrylates by reversible addition-fragmentation chain-transfer methodology yields polymeric zwitterionic thiols containing protected thiol functionality in the zwitterionic units. After polymerization, the protected thiols are liberated to yield thiol-rich polymer zwitterions which serve as precursors to subsequent reactions that produce polymer networks as well as polymer-protein bioconjugates.

Phosphocholine-Functionalized Zwitterionic Highly Branched Poly(β-amino ester)s for Cytoplasmic Protein Delivery

Proteins have tremendous potential for vaccine development and disease treatment, but multiple extracellular and intracellular biological barriers must be overcome before they can exert specific biological functions in the target tissue. The use of polymers as carriers would greatly improve their bioavailability and therapeutic efficiency. Nevertheless, effective protein packaging and cell membrane penetration without causing cytotoxicity is particularly challenging, due largely to the simultaneous distribution of positive and negative charges on protein surface. Here, phosphocholine-functionalized zwitterionic poly(β-amino ester)s, HPAE-D-(±), are developed for cytoplasmic protein delivery. The zwitterionic phosphocholine is capable of binding to both proteins and the cell membrane to facilitate protein packaging and nanoparticle cellular uptake. Compared to amine-functionalized HPAE-E-(+) and carboxylic acid-functionalized HPAE-C-(-), HPAE-D-(±) exhibits much higher cytoplasmic protein delivery efficiency and lower cytotoxicity. In addition, HPAE-D-(±) are readily degraded in aqueous solution. This strategy may be extended to other zwitterions and polymers, thus having profound implications for the development of safe and efficient protein delivery systems.

Inside-Out Oriented Choline Phosphate-Based Biomimetic Magnetic Nanomaterials for Precise Recognition and Analysis of C-Reactive Protein

Phospholipid-based materials exhibit great application potential in the fields of chemistry, biology, and pharmaceutical sciences. In this study, an inside-out oriented choline phosphate molecule, 2-{2-(methacryloyloxy)ethyldimethylammonium}ethyl n-butyl phosphate (MBP), was proposed and verified as a novel ligand of C-reactive protein (CRP) to enrich the functionality of these materials. Compared with phosphorylcholine (PC)-CRP interactions, the binding between MBP and CRP was not affected by the reverse position of phosphate and choline groups and even found more abundant binding sites. Thus, high-density MBP-grafted biomimetic magnetic nanomaterials (MBP-MNPs) were fabricated by reversible addition-fragmentation chain transfer polymerization based on thiol-ene click chemistry. The novel materials exhibited multifunctional applications for CRP including purification and ultrasensitive detection. On the one hand, higher specificity, recovery (90%), purity (95%), and static binding capacity (198.14 mg/g) for CRP were achieved on the novel materials in comparison with traditional PC-based materials, and the enriched CRP from patient serum can maintain its structural integrity and bioactivity. On the other hand, the CRP detection method combining G-quadruplex and thioflavin T developed with MBP-MNPs showed a lower detection limit (10 pM) and wider linear range (0.1-50 nM) than most PC-functionalized analytical platforms. Therefore, the inside-out oriented choline phosphate can not only precisely recognize CRP but also be combined with biomimetic nanomaterials to provide high application potential.

Bioengineering Approaches to Fight against Orthopedic Biomaterials Related-Infections

One of the most serious complications following the implantation of orthopedic biomaterials is the development of infection. Orthopedic implant-related infections do not only entail clinical problems and patient suffering, but also cause a burden on healthcare care systems. Additionally, the ageing of the world population, in particular in developed countries, has led to an increase in the population above 60 years. This is a significantly vulnerable population segment insofar as biomaterials use is concerned. Implanted materials are highly susceptible to bacterial and fungal colonization and the consequent infection. These microorganisms are often opportunistic, taking advantage of the weakening of the body defenses at the implant surface–tissue interface to attach to tissues or implant surfaces, instigating biofilm formation and subsequent development of infection. The establishment of biofilm leads to tissue destruction, systemic dissemination of the pathogen, and dysfunction of the implant/bone joint, leading to implant failure. Moreover, the contaminated implant can be a reservoir for infection of the surrounding tissue where microorganisms are protected. Therefore, the biofilm increases the pathogenesis of infection since that structure offers protection against host defenses and antimicrobial therapies. Additionally, the rapid emergence of bacterial strains resistant to antibiotics prompted the development of new alternative approaches to prevent and control implant-related infections. Several concepts and approaches have been developed to obtain biomaterials endowed with anti-infective properties. In this review, several anti-infective strategies based on biomaterial engineering are described and discussed in terms of design and fabrication, mechanisms of action, benefits, and drawbacks for preventing and treating orthopaedic biomaterials-related infections.

Biomimetic materials based on zwitterionic polymers toward human-friendly medical devices

This review summarizes recent research on the design of polymer material systems based on biomimetic concepts and reports on the medical devices that implement these systems. Biomolecules such as proteins, nucleic acids, and phospholipids, present in living organisms, play important roles in biological activities. These molecules are characterized by heterogenic nature with hydrophilicity and hydrophobicity, and a balance of positive and negative charges, which provide unique reaction fields, interfaces, and functionality. Incorporating these molecules into artificial systems is expected to advance material science considerably. This approach to material design is exceptionally practical for medical devices that are in contact with living organisms. Here, it is focused on zwitterionic polymers with intramolecularly balanced charges and introduce examples of their applications in medical devices. Their unique properties make these polymers potential surface modification materials to enhance the performance and safety of conventional medical devices. This review discusses these devices; moreover, new surface technologies have been summarized for developing human-friendly medical devices using zwitterionic polymers in the cardiovascular, cerebrovascular, orthopedic, and ophthalmology fields.

Characterization of Hydration Water Bound to Choline Phosphate-Containing Polymers

Zwitterionic methacrylate polymers with either choline phosphate (CP) (poly(MCP)) or phosphorylcholine (PC) (poly(MPC)) side groups were analyzed to characterize the bound hydration water molecules as nonfreezing water (NFW), intermediate water (IW), or free water (FW). This characterization was carried out by differential scanning calorimetry (DSC) of polymer/water systems, and the enthalpy changes of cold crystallization and melting were determined. The electron pair orientation of CP is opposite to that of PC, and the former binds the alkyl terminal groups at the phosphate esters. The numbers of NFW and IW molecules per monomer unit of poly(MCP) with an isopropyl terminal group were estimated to be 10.7 and 11.3 mol/mol, respectively, which were slightly greater than those of the poly(MCP) bearing an ethyl terminal group. More NFW and IW molecules hydrated the phosphobetaine polyzwitterions, poly(MCP) and poly(MPC), compared with carboxybetaine and sulfobetaine polymers. Moreover, the hydration states of polyelectrolytes were compared with the zwitterionic polymers. Finally, we discuss the relationship between the amount of hydration water and bio-inert properties.

In situ photoinitiated fabrication of phosphorylcholine-functionalized polyhedral oligomeric silsesquioxane hybrid monolithic column for mixed-mode capillary electrochromatography

A phosphorylcholine-functionalized POSS hybrid monolithic column was synthesized via UV curing. It exhibits hydrophilic interaction and weak cation exchange chromatography retention mechanism for the separation of typical polar and charged compounds.

Zwitterionic Ammonium Sulfonate Polymers: Synthesis and Properties in Fluids

Polymer zwitterions continue to emerge as useful materials for numerous applications, ranging from hydrophilic and antifouling coatings to electronic materials interfaces. While several polymer zwitterion compositions are now well established, interest in this field of soft materials science has grown rapidly in recent years due to the introduction of new structures that diversify their chemistry and architecture. Nonetheless, at present, the variation of the chemical composition of the anionic and cationic components of zwitterionic structures remains relatively limited to a few primary examples. In this article, we highlight the versatility of 4-vinylbenzyl sultone as a precursor to ammonium sulfonate zwitterionic monomers, which are then used in controlled free radical polymerization chemistry to afford "inverted sulfobetaine" polymer zwitterions. An evaluation of the solubility, interfacial activity, and solution configuration of the resultant polymers revealed the dependence of properties on the selection of tertiary amines used for nucleophilic ring-opening of the sultone precursor, as well as useful properties comparisons across different zwitterionic compositions. This article is protected by copyright. All rights reserved.

Emerging Phospholipid Nanobiomaterials for Biomedical Applications to Lab-on-a-Chip, Drug Delivery, and Cellular Engineering

The design of advanced nanobiomaterials to improve analytical accuracy and therapeutic efficacy has become an important prerequisite for the development of innovative nanomedicines. Recently, phospholipid nanobiomaterials including 2-methacryloyloxyethyl phosphorylcholine (MPC) have attracted great attention with remarkable characteristics such as resistance to nonspecific protein adsorption and cell adhesion for various biomedical applications. Despite many recent reports, there is a lack of comprehensive review on the phospholipid nanobiomaterials from synthesis to diagnostic and therapeutic applications. Here, we review the synthesis and characterization of phospholipid nanobiomaterials focusing on MPC polymers and highlight their attractive potentials for applications in micro/nanofabricated fluidic devices, biosensors, lab-on-a-chip, drug delivery systems (DDSs), COVID-19 potential usages for early diagnosis and even treatment, and artificial extracellular matrix scaffolds for cellular engineering.

Fluorinated Polymer Zwitterions: Choline Phosphates and Phosphorylcholines

Among zwitterionic structures, the choline phosphate (CP) group is uniquely attractive for its ability to access novel chemical compositions that embed functional groups directly into the zwitterionic moiety. This paper describes the attachment of fluorinated alkyl groups to CP moieties, yielding zwitterionic monomers 1 and 2 that proved amenable to controlled free radical polymerization and the production of a new set of CP-containing fluorinated polymers and copolymers with phosphorylcholine (PC) zwitterions. This combination of fluorinated hydrocarbons and zwitterions affords novel, water-soluble polymeric amphiphiles that we have examined at fluid interfaces, as coatings, in cell culture, and in magnetic resonance imaging.

Advances in point-of-care testing for cardiovascular diseases

Point-of-care testing (POCT) is a specific format of diagnostic testing that is conducted without accompanying infrastructure or sophisticated instrumentation. Traditionally, such rapid sample-to-answer assays provide inferior analytical performances to their laboratory counterparts when measuring cardiac biomarkers. Hence, their potentially broad applicability is somewhat bound by their inability to detect clinically relevant concentrations of cardiac troponin (cTn) in the early stages of myocardial injury. However, the continuous refinement of biorecognition elements, the optimization of detection techniques, and the fabrication of tailored fluid handling systems to manage the sensing process has stimulated the production of commercial assays that can support accelerated diagnostic pathways. This review will present the latest commercial POC assays and examine their impact on clinical decision-making. The individual elements that constitute POC assays will be explored, with an emphasis on aspects that contribute to economically feasible and highly sensitive assays. Furthermore, the prospect of POCT imparting a greater influence on early interventions for medium to high-risk individuals and the potential to re-shape the paradigm of cardiovascular risk assessments will be discussed.

Synthesis of a zwitterionic N-Ser-Ser-C dimethacrylate cross-linker and evaluation in polyampholyte hydrogels

Polyampholyte hydrogels are attractive materials for tissue engineering scaffolds as they offer a wide variety of features including nonfouling, selective protein delivery, and tunable physical characteristics. However, to improve the potential performance of these materials for in vivo applications, there is a need for a higher diversity of zwitterionic cross-linker species to replace commonly used ethylene glycol (EG) based chemistries. Towards this end, the synthesis of a dipeptide based zwitterionic cross-linker, N-Ser-Ser-C dimethacrylate (S-S) from N-Boc-l-serine is presented. The strategy utilized a convergent coupling of methacrylated serine partners followed by careful global deprotection to yield the zwitterionic cross-linker with good overall yields. This novel cross-linker was incorporated into a polyampholyte hydrogel and its physical properties and biocompatibility were compared against a polyampholyte hydrogel synthesized with an EG-based cross-linker. The S-S cross-linked hydrogel demonstrated excellent nonfouling performance, while promoting enhanced cellular adhesion to fibrinogen delivered from the hydrogel. Therefore, the results suggest that the S-S cross-linker will demonstrate superior future performance for in vivo applications.

Controlled biointerfaces with biomimetic phosphorus-containing polymers

Phosphorus is a ubiquitous and one of the most common elements found in living organisms. Almost all molecules containing phosphorus in our body exist as analogs of phosphate salts or phosphoesters. Their functions are versatile and important, being responsible for forming the genetic code, cell membrane, and mineral components of hard tissue. Several materials inspired from these phosphorus-containing biomolecules have been recently developed. These materials have shown unique properties at the biointerface, such as nonfouling ability, blood compatibility, lubricity, mineralization induction capability, and bone affinity. Several unfavorable events occur at the interface of materials and living organisms because most of these materials have not been designed while taking host responses into account. These unfavorable events are directly linked to reducing functions and shorten the usable periods of medical devices. Biomimetic phosphorus-containing polymers can improve the reliability of materials in biological systems. In addition, phosphorus-containing biomimetic polymers are useful not only for improving the biocompatibility of material surfaces but also for adding new functions due to the flexibility in molecular design. In this review, we describe the recent advances in the control of biointerfacial phenomena with phosphorus-containing polymers. We especially focus on zwitterioninc phosphorylcholine polymers and polyphosphoesters.

Functional Polymer Zwitterions as Reactive Surfactants for Nanoparticle Capture

We describe the synthesis of sulfothetin (ST)-containing polymer zwitterions and their use as polymer surfactants for stabilizing emulsion droplets and for capturing and transporting nanoparticles (NPs) through a flowing aqueous fluid. In contrast to conventional zwitterions, which are chemically inert, the multifunctional ST-containing copolymers we describe both participate in droplet stabilization and embed reactive functionality directly into the zwitterionic framework. Advantageously including these ST zwitterions in phosphorylcholine (PC)-containing copolymers proved particularly useful for producing surfactants that contributed characteristics of droplet stabilization and interfacial reactivity. This was demonstrated by NP pickup, or "capture", experiments that were performed by circulating ST-coated emulsion droplets across a substrate, in a flow cell, containing amine-functionalized silica NPs. The resultant NP adherence to the fluid-fluid interface of the droplets hinged on the available reactivity of both the electrophilic (from ST) and nucleophilic (from the NPs) components as well as the solution pH and extent of amine functionality on the NPs.

Sulfobetaine Methacrylate Polymers of Unconventional Polyzwitterion Architecture and Their Antifouling Properties

Combining high hydrophilicity with charge neutrality, polyzwitterions are intensely explored for their high biocompatibility and low-fouling properties. Recent reports indicated that in addition to charge neutrality, the zwitterion's segmental dipole orientation is an important factor for interacting with the environment. Accordingly, a series of polysulfobetaines with a novel architecture was designed, in which the cationic and anionic groups of the zwitterionic moiety are placed at equal distances from the backbone. They were investigated by in vitro biofouling assays, covering proteins of different charges and model marine organisms. All polyzwitterion coatings reduced the fouling effectively compared to model polymer surfaces of poly(butyl methacrylate), with a nearly equally good performance as the reference polybetaine poly(3-(N-(2-(methacryloyloxy)ethyl)-N,N-dimethylammonio)propanesulfonate). The specific fouling resistance depended on the detailed chemical structure of the polyzwitterions. Still, while clearly affecting the performance, the precise dipole orientation of the sulfobetaine group in the polyzwitterions seems overall to be only of secondary importance for their antifouling behavior.

N-Heterocyclic carbene-carbodiimide (NHC-CDI) betaine adducts: synthesis, characterization, properties, and applications

N-Heterocyclic carbenes (NHCs) are an important class of reactive organic molecules used as ligands, organocatalysts, and σ-donors in a variety of electroneutral ylide or betaine adducts with main-group compounds. An emerging class of betaine adducts made from the reaction of NHCs with carbodiimides (CDIs) form zwitterionic amidinate-like structures with tunable properties based on the highly modular NHC and CDI scaffolds. The adduct stability is controlled by the substituents on the CDI nitrogens, while the NHC substituents greatly affect the configuration of the adduct in the solid state. This Perspective is intended as a primer to these adducts, touching on their history, synthesis, characterization, and general properties. Despite the infancy of the field, NHC-CDI adducts have been applied as amidinate-type ligands for transition metals and nanoparticles, as junctions in zwitterionic polymers, and to stabilize distonic radical cations. These applications and potential future directions are discussed.

Choline phosphate lipid insertion and rigidification of cell membranes for targeted cancer chemo-immunotherapy

To prevent tumor reproduction and metastasis, a method to modify the membranes of cancer cells was designed to suppress their vitality. A phosphatidyl choline reversed choline phosphate lipid (CP-Lip) was synthesized and modified with a PD-L1 antibody (CP-αPDL). Drug-loaded nanoparticles of CP-Lip/CP-αPDL (Dox@tCP-Lipos) could be selectively attached to melanoma cells, thus causing CP-Lip to be inserted and to interact strongly with the cell membrane, which largely reduced the fluidity and functionality of the membrane. As a result, the metabolism, reproduction, and migration of melanoma cells were proved to be weakened by CP-Lip and the tumor was 100% suppressed after treatment with Dox@tCP-Lipos.

Linear Copolymers Based on Choline Ionic Liquid Carrying Anti-Tuberculosis Drugs: Influence of Anion Type on Physicochemical Properties and Drug Release

In this study, drug nanocarriers were designed using linear copolymers with different contents of cholinium-based ionic liquid units, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TMAMA/Cl: 25, 50, and 75 mol%). The amphiphilicity of the copolymers was evaluated on the basis of their critical micelle concentration (CMC = 0.055-0.079 mg/mL), and their hydrophilicities were determined by water contact angles (WCA = 17°-46°). The chloride anions in the polymer chain were involved in ionic exchange reactions to introduce pharmaceutical anions, i.e., p-aminosalicylate (PAS-), clavulanate (CLV-), piperacillin (PIP-), and fusidate (FUS-), which are established antibacterial agents for treating lung and respiratory diseases. The exchange reaction efficiency decreased in the following order: CLV- > PAS- > PIP- >> FUS-. The hydrophilicity of the ionic drug conjugates was slightly reduced, as indicated by the increased WCA values. The major fraction of particles with sizes ~20 nm was detected in systems with at least 50% TMAMA carrying PAS or PIP. The influence of the drug character and carrier structure was also observed in the kinetic profiles of the release processes driven by the exchange with phosphate anions (0.5-6.4 μg/mL). The obtained polymer-drug ionic conjugates (especially that with PAS) are promising carriers with potential medical applications.

Hydration State Variation of Polyzwitterion Brushes through Interplay with Ions

Polyzwitterions have emerged as a new class of antifouling materials alternating poly(ethylene glycol). The exemplary biopassivation and lubrication behaviors are often attributed to the particular chemical structure of zwitterions, which involve a large dipole moment of the charged groups and a neutral net charge, while the hydration state and dynamics also associate with these characteristics. Polymer brushes composed of surface-tethered polyzwitterion chains produced by surface-initiated controlled radical polymerization have been developed as thin films which exhibit excellent antifouling and lubrication properties. In past decades, numerous studies have been devoted to examining the structure and dynamics of polyzwitterion brush chains in aqueous solutions. This feature article provides an overview of recent studies exploring the hydration state of polyzwitterion brushes with specular neutron reflectivity, highlights some newly published work on the nonuniform equilibrium structure, ion concentration dependence, ion specificity, and the effects of charge spacer length in the zwitterions, and discusses future perspective in this field.

Poly(2-aminoethyl methacrylate)-based polyampholyte brush surface with carboxylic groups to improve blood compatibility

Zwitterionic material-based polymer brush significantly prevents protein adsorption and cell adhesion, which leads to the blood compatibility. However, zwitterionic polymer itself is difficult to be modified further, for the blood compatibility since the charged balance is impaired after the modification. In this research, chemically modifiable mixed charge polymer brush is designed, without impairing its characteristics. Condensed mixed charge polymer brush will work like zwitterionic material because neighbouring opposite charge is reported to be important in the zwitterionic material. Cationic polymer brush with primary amine group, which is based on 2-aminoethyl methacrylate (AEMA), was prepared and modified by succinic anhydride to obtain carboxylic group induced poly(AEMA). The ratio of primary amine group and carboxylic group was optimized to obtain the polyampholyte brush. The blood compatibility was evaluated by measuring coagulation/complement activation, protein adsorption and cell adhesion induced by the polymer. Our designed cationic-based polyampholyte brush prevented coagulation/complement activation comparable to poly(2-methacryloyloxyethyl phosphorylcholine) brush, based on intra-monomer interaction, because condensed mix charge works like zwitterion.

Emerging biomaterials for downstream manufacturing of therapeutic proteins

Downstream processing is considered one of the most challenging phases of industrial manufacturing of therapeutic proteins, accounting for a large portion of the total production costs. The growing demand for therapeutic proteins in the biopharmaceutical market in addition to a significant rise in upstream titers have placed an increasing burden on the downstream purification process, which is often limited by high cost and insufficient capacities. To achieve efficient production and reduced costs, a variety of biomaterials have been exploited to improve the current techniques and also to develop superior alternatives. In this work, we discuss the significance of utilizing traditional biomaterials in downstream processing and review the recent progress in the development of new biomaterials for use in protein separation and purification. Several representative methods will be highlighted and discussed in detail, including affinity chromatography, non-affinity chromatography, membrane separations, magnetic separations, and precipitation/phase separations. STATEMENT OF SIGNIFICANCE: Nowadays, downstream processing of therapeutic proteins is facing great challenges created by the rapid increase of the market size and upstream titers, starving for significant improvements or innovations in current downstream unit operations. Biomaterials have been widely used in downstream manufacturing of proteins and efforts have been continuously devoted to developing more advanced biomaterials for the implementation of more efficient and economical purification methods. This review covers recent advances in the development and application of biomaterials specifically exploited for various chromatographic and non-chromatographic techniques, highlighting several promising alternative strategies.

Surface Modification by Polyzwitterions of the Sulfabetaine-Type, and Their Resistance to Biofouling

Films of zwitterionic polymers are increasingly explored for conferring fouling resistance to materials. Yet, the structural diversity of polyzwitterions is rather limited so far, and clear structure-property relationships are missing. Therefore, we synthesized a series of new polyzwitterions combining ammonium and sulfate groups in their betaine moieties, so-called poly(sulfabetaine)s. Their chemical structures were varied systematically, the monomers carrying methacrylate, methacrylamide, or styrene moieties as polymerizable groups. High molar mass homopolymers were obtained by free radical polymerization. Although their solubilities in most solvents were very low, brine and lower fluorinated alcohols were effective solvents in most cases. A set of sulfabetaine copolymers containing about 1 mol % (based on the repeat units) of reactive benzophenone methacrylate was prepared, spin-coated onto solid substrates, and photo-cured. The resistance of these films against the nonspecific adsorption by two model proteins (bovine serum albumin-BSA, fibrinogen) was explored, and directly compared with a set of references. The various polyzwitterions reduced protein adsorption strongly compared to films of poly(nbutyl methacrylate) that were used as a negative control. The poly(sulfabetaine)s showed generally even somewhat higher anti-fouling activity than their poly(sulfobetaine) analogues, though detailed efficacies depended on the individual polymer-protein pairs. Best samples approach the excellent performance of a poly(oligo(ethylene oxide) methacrylate) reference.

Controlling the Kinetics of Self-Reproducing Micelles by Catalyst Compartmentalization in a Biphasic System

Compartmentalization of reactions is ubiquitous in biochemistry. Self-reproducing lipids are widely studied as chemical models of compartmentalized biological systems. Here, we explore the effect of catalyst location on copper-catalyzed azide-alkyne cycloadditions which drive the self-reproduction of micelles from phase-separated components. Tuning the hydrophilicity of the copper-ligand complex, so that hydro-phobic or -philic catalysts are used in combination with hydro-philic and -phobic coupling partners, provides a wide range of reactivity patterns. Analysis of the kinetic data shows that reactions with a hydrophobic catalyst are faster than with a hydrophilic catalyst. Diffusion-ordered spectroscopy experiments suggest compartmentalization of the hydrophobic catalyst inside micelles while the hydrophilic catalyst remains in the bulk aqueous phase. The autocatalytic effects observed can be tuned by varying reactant structure and coupling a hydrophilic alkyne and hydrophobic azide results in a more pronounced autocatalytic effect. We propose and test a model that rationalizes the observations in terms of the phase behavior of the reaction components and catalysts.

Molecular Design of Zwitterionic Polymer Interfaces: Searching for the Difference

The widespread occurrence of zwitterionic compounds in nature has incited their frequent use in designing biomimetic materials. Therefore, zwitterionic polymers are a thriving field. A particular interest for this particular polymer class has currently focused on their use in establishing neutral, low-fouling surfaces. After highlighting strategies to prepare model zwitterionic surfaces as well as those that are more suitable for practical purposes relying strongly on radical polymerization methods, we present recent efforts to diversify the structure of the hitherto quite limited variety of zwitterionic monomers and of the derived polymers. We identify key structural variables, consider their influence on essential properties such as overall hydrophilicity and long-term stability, and discuss promising targets for the synthesis of new variants.

Low-Fouling Thin Hydrogel Coatings Made of Photo-Cross-Linked Polyzwitterions

Although zwitterionic chemistries are among the most promising materials for producing nonfouling surfaces, their structural diversity has been low until now. Here, we compare the in vitro fouling behavior of a set of four systematically varied sulfa-/sulfobetaine-containing zwitterionic hydrogel coatings against a series of proteins and nonmotile as well as motile marine organisms as model foulers. The coatings are prepared by simultaneous photoinduced cross-linking and surface anchoring to elucidate the effect of the molecular structure of the zwitterionic moieties on their antifouling activity. Analogously prepared coatings of poly(butyl methacrylate) and poly(oligoethylene glycol methacrylate) serve as references. Photoreactive polymers are synthesized by the statistical copolymerization of sulfobetaine or sulfabetaine methacrylates and methacrylamides with a benzophenone derivative of 2-hydroxyethyl methacrylate and are applied as a thin film coating. While keeping the density of the zwitterionic and cross-linker groups constant, the molecular structure of the zwitterionic side chains is varied systematically, as is the arrangement of the ion pairs in the side chain by changing the classical linear geometry to a novel Y-shaped geometry. All of the polyzwitterions strongly reduce fouling compared to poly(butyl methacrylate). Overall, the sulfabetaine polyzwitterion coatings studied matches the high antifouling effectiveness of oligo(ethylene glycol)-based ones used as a control. Nevertheless, performances varied individually for a given pair of polymer and fouler. The case of the polysulfobetaines exemplifies that minor chemical changes in the polymer structure affect the antifouling performance markedly. Accordingly, the antifouling performance of such polymers cannot be correlated simply to the type of zwitterion used (which could be generally ranked as better performing or poorer performing) but is a result of the polymer's precise chemical structure. Our findings underline the need to enlarge the existing structural diversity of polyzwitterions for antifouling purposes to optimize the potential of their chemical structure.

Blood-Compatible Surfaces with Phosphorylcholine-Based Polymers for Cardiovascular Medical Devices

For the acquisition of blood-compatible materials, various hydrophilic polymers for surface modification have been examined. Among them, polymers with a representative phospholipid polar group, the phosphorylcholine (PC) group, are a successful example. These polymers were designed from inspiration of the cell membrane surface and provide protein adsorption resistance even following contact with plasma. This important property is based on the unique hydration state of water molecules surrounding hydrated polymer; in other words, water molecules weakly interact with the polymers and maintain their favorable cluster structure through hydrogen bonding. These polymers are not only hydrophilic, but also electrically neutral, important characteristics which make hydrogen bonding with water molecules less likely to occur and avoid hydrophobic interactions. Phosphorylcholine groups and other zwitterionic structures are significant as hydrophilic functional groups meeting these important requirements. In this review, blood compatibility of a polymer having a PC group is introduced in relation to its hydration structure, followed by a description of the applications of this polymer to cardiovascular medical devices.

Synergistic Effects of Ions and Surface Potentials on Antifouling Poly(3,4-ethylenedioxythiophene): Comparison of Oligo(Ethylene Glycol) and Phosphorylcholine

For electrified surfaces, ions and applied potentials play major roles in controlling the surface properties. Antifouling materials such as poly(ethylene glycol) and zwitterionic polymers that resist nonspecific protein binding and cell adhesion play a key role in various biomedical applications. In this study, we investigated and compared the antifouling properties of conducting polymers grafted with oligo(ethylene glycol) groups and phosphorylcholine (PC) groups in the presence of different anions and applied potentials. Considerable effort has been made to illustrate the different effects of manipulating the antifouling properties of these two surfaces. We prepared polymer films by applying electropolymerization to two functionalized (3,4-ethylenedioxythiophene) polymers containing triethylene glycol and PC groups, respectively. A quartz crystal microbalance with dissipation (QCM-D) was employed to characterize the negatively charged bovine serum albumin and positively charged lysozyme adsorption as a function of ionic concentration in the presence of various Hofmeister anions. The frequency changes corresponded to the protein or ion adsorption/desorption behavior on the surface. The anions adsorbed on polymer films to effectively enhance the hydration layer of the polymer surface and reduce nonspecific protein binding. We further integrated a potentiostat with the QCM-D to control the protein adsorption/desorption behaviors by applying potentials, and we conducted an electrochemical QCM-D study. Most importantly, with the synergistic effect of ions and surface potential, a nearly fresh polymer surface was regenerated. This study describes principles to maintain and regenerate the antifouling properties of electrified surfaces, which are critical for implanted bioelectronics applications.

Romantic Surfaces: A Systematic Overview of Stable, Biospecific, and Antifouling Zwitterionic Surfaces

This Feature Article focuses on recent advances in the bioconjugation of surface-bound zwitterionic polymers for biospecific antifouling surfaces. Various approaches for the functionalization of antifouling zwitterionic polymers are systematically investigated, such as chain-end and side-chain functionalization. Side-chain functionalization methods can be further classified as those that are achieved through homopolymerization of custom-synthesized zwitterionic monomers equipped with reactive groups, or those that are achieved via synthesis of random or block copolymers combining different monomers with antifouling functionality and others with reactive groups. Several of the pros and cons of these approaches are outlined and discussed. Finally, some perspective and future directions of research are presented toward long-term stable, generically repelling surfaces that strongly and specifically adhere to a single component in a complex mixture.

Zwitterionic shielded polymeric prodrug with folate-targeting and pH responsiveness for drug delivery

Zwitterionic polymers are a class of polymers that acts as both Lewis base and Lewis acid in solution. These polymers not only have excellent properties of hydration, anti-bacterial adhesion, charge reversal and easy chemical modification, but also have characteristics of long-term circulation and suppress nonspecific protein adsorption in vivo. Here, we describe a novel folate-targeted and acid-labile polymeric prodrug under the microenvironment of tumor cells, abbreviated as FA-P(MPC-co-PEGMA-BZ)-g-DOX, which was synthesized via a combination of reversible addition-fragmentation chain transfer (RAFT) copolymerization, Schiff-base reaction, Click chemistry, and a reaction between the amine group of doxorubicin (DOX) and aldehyde functionalities of P(MPC-co-PEGMA-BZ) pendants, wherein MPC and PEGMA-BZ represent 2-(methacryloyloxy)ethyl phosphorylcholine and polyethylene glycol methacrylate ester benzaldehyde, respectively. The polymeric prodrug could self-assemble into nanoparticles in an aqueous solution. The average particle size and morphologies of the prodrug nanoparticles were observed by dynamic light scattering (DLS) and transmission electron microscopy (TEM), respectively. We also investigated the in vitro drug release behavior and observed rapid prodrug nanoparticle dissociation and drug release under a mildly acidic microenvironment. The methyl thiazolyl tetrazolium (MTT) assay verified that the P(MPC-co-PEGMA-BZ) copolymer possessed good biocompatibility and the FA-P(MPC-co-PEGMA-BZ)-g-DOX prodrug nanoparticles showed higher cellular uptake than those prodrug nanoparticles without the FA moiety. The results of cytotoxicity and the intracellular uptake of non-folate/folate targeted prodrug nanoparticles further confirmed that FA-P(MPC-co-PEGMA-BZ)-g-DOX could be efficiently accumulated and rapidly internalized by HeLa cells due to the strong interaction between multivalent phosphorylcholine (PC) groups and cell membranes. This kind of multifunctional FA-P(MPC-co-PEGMA-BZ)-g-DOX prodrug nanoparticle with combined target-ability and pH responsiveness demonstrates promising potential for cancer chemotherapy.

Biomimetic Polymer-Based Method for Selective Capture of C-Reactive Protein in Biological Fluids

Selective capturing and purification of C-reactive protein (CRP) from complex biological fluids plays a pivotal role in studying biological activities of CRP in various diseases. However, obvious nonspecific adsorption of proteins was observed on current affinity sorbents, and thus additional purification steps are often required, which could compromise the recovery of the target protein and/or introduce new impurities. In this study, inspired by the highly specific interaction between CRP and the cell membrane, an excellent anti-biofouling compound 2-(methacryloyloxy)ethyl phosphorylcholine and a highly hydrophilic crosslinker N, N'-methylenebisacrylamide were employed to fabricate a novel cell membrane biomimetic polymer for selective capture of CRP in the presence of calcium ions. Based on the polymer described above, a facile enrichment approach was established after systematic optimization of the washing and elution conditions. With its favorable properties, such as good porosity, weak electrostatic interaction, high hydrophilicity, and biocompatibility, the novel biomimetic polymer exhibits good specificity, selectivity, recovery (near 100%), purity (95%), and a lower nonspecific protein adsorption for CRP in comparison with commercial immobilized p-aminophenyl phosphoryl choline gel and other purification materials. Furthermore, the structural integrity and functionality of CRP in the elution fraction were well preserved and confirmed by circular dichroism spectroscopy, fluorescence spectroscopy, and immunoturbidimetric assay. Finally, the biomimetic polymer was successfully applied to the selective enrichment of CRP from sera of patients with inflammation and rats. The proposed novel enrichment approach based on the versatile biomimetic polymer can be used for effective CRP purification, which will benefit the in-depth study of its biological roles.

Synthesis of Zwitterionic Pluronic Analogs

Novel polymer amphiphiles with chemical structures designed as zwitterionic analogs of Pluronic block copolymers were prepared by controlled free radical polymerization of phosphorylcholine (PC) or choline phosphate (CP) methacrylate monomers from a difunctional poly(propylene oxide) (PPO) macroinitiator. Well-defined, water-dispersible zwitterionic triblock copolymers, or "zwitteronics", were prepared with PC content ranging from 5 to 47 mol percent and composition-independent surfactant characteristics in water, which deviate from the properties of conventional Pluronic amphiphiles. These PC-zwitteronics assembled into nanoparticles in water, with tunable sizes and critical aggregation concentrations (CACs) based on their hydrophilic-lipophilic balance (HLB). Owing to the lower critical solution temperature (LCST) miscibility of the hydrophobic PPO block in water, PC-zwitteronics exhibited thermoreversible aqueous solubility tuned by block copolymer composition. The chemical versatility of this approach was demonstrated by embedding functionality, in the form of alkyne groups, directly into the zwitterion moieties. These alkynes proved ideal for cross-linking the zwitteronic nanoparticles and for generating nanoparticle-cross-linked hydrogels using UV-initiated thiol-yne "click" chemistry.

Guided protein/cell patterning on superhydrophilic polymer brushes functionalized with mussel-inspired polydopamine coatings

A simple approach for preparing bicomponent polymer patterns was developed by coating polydopamine (PDA) on superhydrophilic poly(2-acryl-amido-2-methylpropane sulfonic acid) (PAMPS) brushes. Well-defined and versatile arrays of proteins and cells were achieved without harm to proteins and cells.

Highly selective and efficient removal of arsenic(V), chromium(VI) and selenium(VI) oxyanions by layered double hydroxide intercalated with zwitterionic glycine

In this study, a new strategy for highly selective and extremely efficient removal of toxic oxyanions (Cr(VI), Se(VI), and As(V)) from aqueous solutions using zwitterionic glycine intercalated layered double hydroxide (Gly-LDH) was reported. Hence, to investigate the effect of zwitterionic glycine on the adsorption capacity, selectivity factor and adsorption mechanism of LDHs, two NiAl LDHs intercalated with different inter-layer anions, including NO₃^- and glycine, were synthesized. The obtained results show that the adsorption capacity and selectivity factor of oxyanions through ion exchange mechanism in NO₃-LDH is lower than Gly-LDH. Gly-LDH displayed a selectivity order of Se(VI)<Cr(VI)<<<As(V) for the oxyanions. The enormous adsorption capacity of 731.6mgg^-1 for As(V) and very high distribution coefficients (K_d) of 5.98×10⁷mLg^-1, using a V/m ratio of 2000mLg^-1, were observed, which are among the highest values reported for As(V) adsorbents. The adsorption kinetic curves for As(V) fitted well with the pseudo-second order model, suggesting a chemical adsorption mechanism via As(V)NH₃⁺ bonding. For the As(V) (at 40mgL^-1 concentration), the adsorption is exceptionally rapid, showing a 93.5% removal within 30min, 98.0% removal within 40min, and ∼100% removal within 70min.

Multilayer Choline Phosphate Molecule Modified Surface with Enhanced Cell Adhesion but Resistance to Protein Adsorption

Choline phosphate (CP), which is a new zwitterionic molecule, and has the reverse order of phosphate choline (PC) and could bind to the cell membrane though the unique CP-PC interaction. Here we modified a glass surface with multilayer CP molecules using surface-initiated atom-transfer radical polymerization (SI-ATRP) and the ring-opening method. Polymeric brushes of (dimethylamino)ethyl methacrylate (DMAEMA) were synthesized by SI-ATRP from the glass surface. Then the grafted PDMAEMA brushes were used to introduce CP groups to fabricate the multilayer CP molecule modified surface. The protein adsorption experiment and cell culture test were used to evaluate the biocompatibility of the modified surfaces by using human umbilical veinendothelial cells (HUVECs). The protein adsorption results demonstrated that the multilayer CP molecule decorated surface could prevent the adsorption of fibrinogen and serum protein. The adhesion and proliferation of cells were improved significantly on the multilayer CP molecule modified surface. Therefore, the biocompatibility of the material surface could be improved by the modified multilayer CP molecule, which exhibits great potential for biomedical applications, e.g., scaffolds in tissue engineering.

Dipole Orientation Matters: Longer-Circulating Choline Phosphate than Phosphocholine Liposomes for Enhanced Tumor Targeting

Zwitterionic phosphocholine (PC) liposomes are widely used in drug delivery because of their high biocompatibility and long blood circulation time. We herein report that by flipping the direction of the PC dipole, the resulting choline phosphate (CPe) liposomes have an even longer circulation time, as confirmed at both cellular and animal-model levels. Even when 33% cholesterol was included in the lipid formulation with a poly(ethylene glycol) layer, the CPe liposome still had a longer blood circulation time. Isothermal titration calorimetry indicates a lack of protein adsorption or PC membrane attachment for the CPe liposomes. This is different from the previously reported adhesion of CP polymers to PC lipid membranes, which may be attributed to the different ways of displaying the CP headgroup. With a longer blood circulation time, the CPe liposomes accumulated in tumors more easily than PC liposomes, which is likely due to the enhanced permeation and retention effect and tumor cell uptake. This study provides key insights into zwitterionic biointerfaces for biomedical, analytical, and materials applications.

Bioreducible Polymer Nanocarrier Based on Multivalent Choline Phosphate for Enhanced Cellular Uptake and Intracellular Delivery of Doxorubicin

Limited cellular uptake and inefficient intracellular drug release severely hamper the landscape of polymer drug nanocarriers in cancer chemotherapy. Herein, to address these urgent challenges in tumor treatment simultaneously, we integrated the multivalent choline phosphate (CP) and bioreducible linker into a single polymer chain, designed and synthesized a neoteric bioreducible polymer nanocarrier. The excellent hydrophility of these zwitterionic CP groups endowed high drug loading content and drug loading efficiency of doxorubicin to this drug delivery system (∼22.1 wt %, ∼95.9%). Meanwhile, we found that the multivalent choline phosphate can effectively enhance the internalization efficiency of this drug-loaded nanocarrier over few seconds, and the degree of improvement depended on the CP density in a single polymer chain. In addition, after these nanocarriers entered into the tumor cells, the accelerated cleavage of bioreducible linker made it possible for more cargo escape from the delivery system to cytoplasm to exert their cytostatic effects more efficiently. The enhanced therapeutic efficacy in various cell lines indicated the great potential of this system in anticancer drug delivery applications.

The effect of comb architecture on complex coacervation

Complex coacervation is a widely utilized technique for effecting phase separation, though predictive understanding of molecular-level details remains underdeveloped.

Modular and rapid access to amphiphilic homopolymers via successive chemoselective post-polymerization modification

A modular and simplified post-polymerization modification strategy is developed for the synthesis of amphiphilic homopolymers.

Thiol-Ene Step-Growth as a Versatile Route to Functional Polymers

A new use of the thiol-ene reaction to generate functional, redox-tunable polymers is described. To illustrate the versatility of this approach, tailored divinyl ether monomers were polymerized with triethylene glycol dithiol to yield polymers containing either a carbonate or zwitterionic phosphocholine within the polymer backbone. Similarly, dithioerythritol was polymerized with triethylene glycol divinyl ether to yield a polymer with pendant diols and show how functional groups can be designed into either the divinyl ether or dithiol monomer. Using the thioether functional group inherent to this polymerization, all three polymers were selectively and quantitatively oxidized to either sulfoxides or sulfones by treatment with dilute hydrogen peroxide or mCPBA, respectively. With these illustrative examples, it is shown that the thiol-ene polymerization is a broad-reaching method to access a class of new redox-active polymers which contain varied and dense functional-group compositions.