Fabrication of Isolated Metal–Organic Polyhedra in Confined Cavities: Adsorbents/Catalysts with Unusual Dispersity and Activity

Room-Temperature Synthesis of Covalently Bridged MOP@TpPa-CH3 Composite Photocatalysts for Artificial Photosynthesis

The conversion of CO2 into useful chemicals via photocatalysts is a promising strategy for resolving the environmental problems caused by the addition of CO2. Herein, a series of composite photocatalysts MOP@TpPa-CH3 based on MOP-NH2 and TpPa-CH3 through covalent bridging have been prepared via a facile room-temperature evaporation method and employed for photocatalytic CO2 reduction. The photocatalytic performances of MOP@TpPa-CH3 are greater than those of TpPa-CH3 and MOP-NH2, where the CO generation rate of MOP@TpPa-CH3 under 10% CO2 still reaches 119.25 μmol g-1 h-1, which is 2.18 times higher than that under pure CO2 (54.74 μmol g-1 h-1). To investigate the structural factors affecting the photocatalytic activity, MOP@TBPa-CH3 without C═O groups is synthesized, and the photoreduction performance is also evaluated. The controlling experimental results demonstrate that the excellent photoreduction CO2 performance of MOP@TpPa-CH3 in a 10% CO2 atmosphere is due to the presence of C═O groups in TpPa-CH3. This work offers a new design and construction strategy for novel MOP@COF composites.

Bifunctional Metal-Organic Nanoballs Featuring Lewis Acidic and Basic Sites as a New Platform for One-Pot Tandem Catalysis

The design and synthesis of polyhedra using coordination-driven self-assembly has been an intriguing research area for synthetic chemists. Metal-organic polyhedra are a class of intricate molecular architectures that have garnered significant attention in the literature due to their diverse structures and potential applications. Hereby, we report Cu-MOP, a bifunctional metal-organic cuboctahedra built using 2,6-dimethylpyridine-3,5-dicarboxylic acid and copper acetate at room temperature. The presence of both Lewis basic pyridine groups and Lewis acidic copper sites imparts catalytic activity to Cu-MOP for the tandem one-pot deacetalization-Knoevenagel/Henry reactions. The effect of solvent system and time duration on the yields of the reactions was studied, and the results illustrate the promising potential of these metal-organic cuboctahedra, also known as nanoballs for applications in catalysis.

Ultralight crystalline hybrid composite material for highly efficient sequestration of radioiodine

Considering the importance of sustainable nuclear energy, effective management of radioactive nuclear waste, such as sequestration of radioiodine has inflicted a significant research attention in recent years. Despite the fact that materials have been reported for the adsorption of iodine, development of effective adsorbent with significantly improved segregation properties for widespread practical applications still remain exceedingly difficult due to lack of proper design strategies. Herein, utilizing unique hybridization synthetic strategy, a composite crystalline aerogel material has been fabricated by covalent stepping of an amino-functionalized stable cationic discrete metal-organic polyhedra with dual-pore containing imine-functionalized covalent organic framework. The ultralight hybrid composite exhibits large surface area with hierarchical macro-micro porosity and multifunctional binding sites, which collectively interact with iodine. The developed nano-adsorbent demonstrate ultrahigh vapor and aqueous-phase iodine adsorption capacities of 9.98 g.g-1 and 4.74 g.g-1, respectively, in static conditions with fast adsorption kinetics, high retention efficiency, reusability and recovery.

Dynamic Cages-Towards Nanostructured Smart Materials

The interest in capsular assemblies such as dynamic organic and coordination cages has blossomed over the last decade. Given their chemical and structural variability, these systems have found applications in diverse fields of research, including energy conversion and storage, catalysis, separation, molecular recognition, and live-cell imaging. In the exploration of the potential of these discrete architectures, they are increasingly being employed in the formation of more complex systems and smart materials. This Review highlights the most promising pathways to overcome common drawbacks of cage systems (stability, recovery) and discusses the most promising strategies for their hybridization with systems featuring various dimensionalities. Following the description of the most recent advances in the fabrication of zero to three-dimensional cage-based systems, this Review will provide the reader with the structure-dependent relationship between the employed cages and the properties of the materials.

Confinement inside MOFs Enables Guest-Modulated Spin Crossover of Otherwise Low-Spin Coordination Cages

Confinement of discrete coordination cages within nanoporous lattices is an intriguing strategy to gain unusual properties and functions. We demonstrate here that the confinement of coordination cages within metal-organic frameworks (MOFs) allows the spin state of the cages to be regulated through multilevel host-guest interactions. In particular, the confined in situ self-assembly of an anionic FeII4L6 nanocage within the mesoporous cationic framework of MIL-101 leads to the ionic MOF with an unusual hierarchical host-guest structure. While the nanocage in solution and in the solid state has been known to be invariantly diamagnetic with low-spin FeII, FeII4L6@MIL-101 exhibits spin-crossover (SCO) behavior in response to temperature and release/uptake of water guest within the MOF. The distinct color change concomitant with water-induced SCO enables the use of the material for highly selective colorimetric sensing of humidity. Moreover, the spin state and the SCO behavior can be modulated also by inclusion of a guest into the hydrophobic cavity of the confined cage. This is an essential demonstration of the phenomenon that the confinement within porous solids enables an SCO-inactive cage to show modulable SCO behaviors, opening perspectives for developing functional supramolecular materials through hierarchical host-guest structures.

Endowing Covalent Organic Frameworks with Photoresponsive Active Sites for Controllable Propylene Adsorption

Photoresponsive covalent organic frameworks (PCOFs) have emerged as attractive candidates for adsorption, but it is challenging to construct PCOF adsorbents due to structural order loss of covalent organic frameworks (COFs) after introducing photoresponsive motifs and/or tedious steps of postmodification. Here, a facile strategy is developed, by dispersing photoresponsive metal-organic polyhedra (PMOP) into COFs, to endow COFs with photoresponsive adsorption sites. As a proof-of-concept study, a COF with pore size of 4.5 nm and PMOP with suitable molecular size (4.0 and 3.1 nm for trans and cis configuration, respectively) are selected to meet the requirements of proper accommodation space, good guest dispersion, and free isomerization. The structure of COF is well preserved after introducing PMOPs. Interestingly, the obtained photoresponsive host-guest composite (PHGC) adsorbents exhibit photomodulated adsorption capacity on propylene (C₃ H₆ ) and the change in adsorption capacity can reach up to 43.3% and is stable during multiple cycles. Density functional theory calculations reveal that visible-light irradiation drives the azobenzene motifs in PHGCs to the trans configuration and the adsorption sites are fully open and interact with C₃ H₆ . UV-light irradiation makes the azobenzene motifs transform to the cis configuration, leading to the shield of the adsorption sites and the consequent release of C₃ H₆ .

Transformation of a copper-based metal-organic polyhedron into a mixed linker MOF for CO2 capture

A new mixed linker metal-organic framework (MOF) has been synthesized from a copper-based metal-organic polyhedron (MOP-1) and 2,2'-bipyridine (2,2'-bipy). The CuMOF-Bipy with a formula of [Cu₂(2,2'-bpy)₂(m-BDC)₂]_n is comprised of a binuclear Cu(II) node coordinated to 2,2'-bipy, and isophthalic acid (m-BDC), which bridges to neighboring nodes. The crystal structure of CuMOF-Bipy consists of a stacked two-dimensional framework with the sql topology. CuMOF-Bipy was characterized by single-crystal X-ray diffraction (SC-XRD), X-ray photoelectron spectroscopy (XPS), thermogravimetric analysis (TGA), and CO₂ sorption. CuMOF-Bipy was shown to have one-dimensional sinusoidal channels that allow diffusion of CO₂ but not N₂.

Metal Organic Polygons and Polyhedra: Instabilities and Remedies

The field of coordination chemistry has undergone rapid transformation from preparation of monometallic complexes to multimetallic complexes. So far numerous multimetallic coordination complexes have been synthesized. Multimetallic coordination complexes with well-defined architectures are often called as metal organic polygons and polyhedra (MOPs). In recent past, MOPs have received tremendous attention due to their potential applicability in various emerging fields. However, the field of coordination chemistry of MOPs often suffer set back due to the instability of coordination complexes particularly in aqueous environment-mostly by aqueous solvent and atmospheric moisture. Accordingly, the fate of the field does not rely only on the water solubilities of newly synthesized MOPs but very much dependent on their stabilities both in solution and solid state. The present review discusses several methodologies to prepare MOPs and investigates their stabilities under various circumstances. Considering the potential applicability of MOPs in sustainable way, several methodologies (remedies) to enhance the stabilities of MOPs are discussed here.

Anion Binding as a Strategy for the Synthesis of Porous Salts

Porous salts have recently emerged as a promising new class of ultratunable permanently microporous solids. These adsorbents, which were first reported as ionic solids based on porous cations and anions, can be isolated from a wide variety of charged, permanently porous coordination cages. A challenge in realizing the full tunability of such systems, however, lies in the fact that the majority of coordination cages for which surface areas have been reported are comprised of charge-balanced inorganic and organic building blocks that result in neutral cages. As such, most reported permanently porous coordination cages cannot be used as reagents in the synthesis of porous salts. Here, we show that the facile reaction of TBAX (TBA⁺ = tetra-n-butylammonium; X = F^- and Cl^-) with molybdenum paddlewheel-based coordination cages of the M₄L₄ and M₂₄L₂₄ lantern and cuboctahedra structure types, respectively, affords charged cages by virtue of coordination of halide anions to the internal and/or external metal sites on these structures, as confirmed by single-crystal X-ray diffraction, X-ray photoelectron spectroscopy, and nuclear magnetic resonance (NMR) spectroscopy. At a practical level, the TBAX/cage reactions, which are fully reversible upon isolation of the cage with the appropriate solvent, solubilize otherwise rigorously insoluble cages. This method significantly increases the solution processability of these highly porous solids. Toward the formation of new porous salts, halide binding also serves to incorporate charge on neutral cages and make them amenable to simple salt metathesis reactions to afford new porous salts based on anions and cations with intrinsic porosity. A combination of diffraction methods and a suite of spectroscopic tools confirms speciation of the isolated solids, which represent a new class of highly tunable porous salts. Ultimately, this work represents a roadmap for the preparation of new porous solids and showcases the utility and broad applicability of anion binding as a strategy for the synthesis of porous salts.

Self-assembly of stable and high-performance molecular cage-crosslinked graphene oxide membranes for contaminant removal

Membrane separation is regarded as efficient technology to alleviate global water crisis. Two-dimensional membranes are promising for contaminant removal from wastewaters, but their uncontrollable transport pathway and instability hinder the further development. In this study, the high-performance and stable two-dimensional framework membranes are self-assembled by graphene oxide (GO) nanosheets and amino-appended metal-organic polyhedrons (MOPs) for water purification and remediation. The MOP molecular cages are uniformly intercalated between GO nanosheets and enriched at defects/edges, and can crosslink membranes, to provide in-plane selective channels, refine vertical passageways, and fix out-of-plane interlayer spaces. The prepared GO/MOP framework membranes have improved stability and nanofiltration performance under cross-flow condition, can keep performance in water after 50 h filtration, and show high rejections over 92% for Na₂SO₄ and 99% for antibiotic and dye contaminants with molecular weights over 280 g mol^-1, and sixfold permeance as that of GO membranes. Our molecular cage-intercalated and crosslinked two-dimensional frameworks offer an alternative route to design robust membranes for efficient removal of contaminants in wastewaters.

Trap Inlaid Cationic Hybrid Composite Material for Efficient Segregation of Toxic Chemicals from Water

Metal-based oxoanions are potentially toxic pollutants that can cause serious water pollution. Therefore, the segregation of such species has recently received significant research attention. Even though several adsorbents have been employed for effective management of chemicals, their limited microporous nature along with non-monolithic applicability has thwarted their large-scale real-time application. Herein, we developed a unique anion exchangeable hybrid composite aerogel material (IPcomp-6), integrating a stable cationic metal-organic polyhedron with a hierarchically porous metal-organic gel. The composite scavenger demonstrated a highly selective and very fast segregation efficiency for various hazardous oxoanions such as, HAsO₄ ^2- , SeO₄ ^2- , ReO₄ ^- , CrO₄ ^2- , MnO₄ ^- , in water, in the presence of 100-fold excess of other coexisting anions. The material was able to selectively eliminate trace HAsO₄ ^2- even at low concentration to well below the As^V limit in drinking water defined by WHO.

Strategies for the Construction of Functional Materials Utilizing Presynthesized Metal-Organic Cages (MOCs)

Metal-organic cages (MOCs) that assemble from metal ions or metal clusters and organic ligands have attracted the interest of the scientific community because of their various functional coordination cavities. Unlike metal-organic frameworks (MOFs) with infinite frameworks, MOCs have discrete structures, making them soluble and stable in certain solvents and facilitating their application as starting reagents in the further construction of single components or composite materials. In recent years, increasing progress has been made in this field. In this review, we introduce these works from the perspective of design strategies, and focus on how presynthesized MOCs can be used to construct functional materials. Finally, we discuss the challenges and development prospects in this field.

Electrostatically cooperative host-in-host of metal cluster ⊂ ionic organic cages in nanopores for enhanced catalysis

The construction of hierarchically nanoporous composite for high-performance catalytic application is still challenging. In this work, a series of host-in-host ionic porous materials are crafted by encapsulating ionic organic cages into a hyper-crosslinked, oppositely charged porous poly(ionic liquid) (PoPIL) through an ion pair-directed assembly strategy. Specifically, the cationic cage (C-Cage) as the inner host can spatially accommodate a functional Au cluster, forming a [Au⊂C-Cage+]⊂PoPIL- supramolecular composite. This dual-host molecular hierarchy enables a charge-selective substrate sorting effect to the Au clusters, which amplifies their catalytic activity by at least one order of magnitude as compared to Au confined only by C-Cage as the mono-host (Au⊂C-Cage+). Moreover, we demonstrate that such dual-host porous system can advantageously immobilize electrostatically repulsive Au⊂C-Cage+ and cationic ferrocene co-catalyst (Fer+) together into the same microcompartments, and synergistically speed up the enzyme-like tandem reactions by channelling the substrate to the catalytic centers via nanoconfinement.

Rhodium-Based Metal-Organic Polyhedra Assemblies for Selective CO2 Photoreduction

Heterogenization of molecular catalysts via their immobilization within extended structures often results in a lowering of their catalytic properties due to a change in their coordination sphere. Metal-organic polyhedra (MOP) are an emerging class of well-defined hybrid compounds with a high number of accessible metal sites organized around an inner cavity, making them appealing candidates for catalytic applications. Here, we demonstrate a design strategy that enhances the catalytic properties of dirhodium paddlewheels heterogenized within MOP (Rh-MOP) and their three-dimensional assembled supramolecular structures, which proved to be very efficient catalysts for the selective photochemical reduction of carbon dioxide to formic acid. Surprisingly, the catalytic activity per Rh atom is higher in the supramolecular structures than in its molecular sub-unit Rh-MOP or in the Rh-metal-organic framework (Rh-MOF) and yields turnover frequencies of up to 60 h^-1 and production rates of approx. 76 mmole formic acid per gram of the catalyst per hour, unprecedented in heterogeneous photocatalysis. The enhanced catalytic activity is investigated by X-ray photoelectron spectroscopy and electrochemical characterization, showing that self-assembly into supramolecular polymers increases the electron density on the active site, making the overall reaction thermodynamically more favorable. The catalyst can be recycled without loss of activity and with no change of its molecular structure as shown by pair distribution function analysis. These results demonstrate the high potential of MOP as catalysts for the photoreduction of CO₂ and open a new perspective for the electronic design of discrete molecular architectures with accessible metal sites for the production of solar fuels.

Surface chemistry of metal-organic polyhedra

Metal-organic polyhedra (MOPs) are discrete, intrinsically-porous architectures that operate at the molecular regime and, owing to peripheral reactive sites, exhibit rich surface chemistry. Researchers have recently exploited this reactivity through post-synthetic modification (PSM) to generate specialised molecular platforms that may overcome certain limitations of extended porous materials. Indeed, the combination of modular solubility, orthogonal reactive sites, and accessible cavities yields a highly versatile molecular platform for solution to solid-state applications. In this feature article, we discuss representative examples of the PSM chemistry of MOPs, from proof-of-concept studies to practical applications, and highlight future directions for the MOP field.

Process-Oriented Smart Adsorbents: Tailoring the Properties Dynamically as Demanded by Adsorption/Desorption

Adsorptive separation plays a critical role in chemical, food, pharmaceutical, and environmental industries, as well as in many other industrial areas. Adsorbents are most important for adsorptive separation and undergo adsorption and desorption processes to accomplish the specific tasks of separation. In the process of adsorption, adsorbates diffuse into the pore spaces of adsorbents through pore openings, adsorb on active sites via physical or chemical interactions, and subsequently are regenerated by temperature or pressure swings during desorption. In the process of adsorption and desorption, however, the requirements for pore structures and surface properties of adsorbents are different. In general, adsorbents with small pore openings can realize selective adsorption and do not favor desorption; on the other hand, adsorbents with large pore openings are efficient in desorption but at the expense of adsorption selectivity. Remarkably, active sites possessing strong interactions with adsorbates contribute to high selectivity for adsorption, while desorption becomes difficult. The trade-off between adsorption and desorption presents an enormous challenge to develop high-efficiency adsorbents. Restricted by their fixed structures and surface properties, conventional adsorbents are unable to meet the demands of adsorption and desorption processes simultaneously.To confront the obstacles, the development of advanced adsorbents to meet the demand of adsorptive separation are urgent. A key strategy to address such issues lies in dynamically adjusting the pore structures or the surface properties of adsorbents with controllability according to the demands of adsorption/desorption. For instance, pursuant to the requirements of varying pore structures during adsorption/desorption, the pore openings of adsorbents can be customized through dynamic structural change of the decorated stimuli-sensitive motifs by suitable external intervention. In addition, the active sites within the adsorbents can be exposed to enhance the adsorption selectivity or sheltered to accelerate the desorption through stimuli-triggered adsorbent-adsorbate interactions. Hence, we proposed a concept of process-oriented smart adsorbents (POSAs) on the basis of the requirements of the adsorption/desorption processes. The design and development of such POSAs are based on three aspects, namely, pore openings, pore spaces, and adsorption sites of adsorbents.In this Account, we present the progress in the development of POSAs according to the demands of adsorption/desorption processes. A series of POSAs with incorporated stimuli-sensitive motifs were successfully achieved. The versatility of incorporated motifs allows them to tune the pore structures and surface properties of adsorbents dynamically and further to enhance the adsorption and desorption efficiency simultaneously. Based on the concept of POSAs, we hope that this Account could contribute to the development of high-efficiency adsorbents and ultimately promote their applications in practical industrial separation. Moreover, we present an outlook on future trends and challenges on the road toward the development and applications of POSAs.

Controllable Microporous Framework Isomerism within Continuous Mesoporous Channels: Hierarchically Porous Structure for Capture of Bulky Molecules

To date, some attempts have been made to synthesize hierarchically porous metal-organic frameworks (HPMOFs), and in most cases, mesopores are formed in microporous frameworks. However, mass transfer and diffusion are still limited in such HPMOFs since micropores connect mesopores and mesopores are noncontinuous. Here, we fabricate a new hierarchical structure through the formation of microporous MOFs within continuous mesoporous channels. Confined space in the as-prepared mesoporous silica-containing template was used to prepare well-dispersed metal precursor of ZnO. The strategy of ligand vapor-induced crystallization was then designed to construct MOFs inside mesoporous channels, in which vapored ligand at elevated temperature diffuses and reacts with metal precursor. Our results indicate that framework isomerism is controllable by adjusting the crystallization conditions. In comparison to their microporous and mesoporous counterparts, the hierarchically porous materials show obviously enhanced adsorption performance on a series of bulky molecules including dye, enzyme, and metal-organic polyhedron.

Controlling the secondary assembly of porous anionic uranyl-organic polyhedra through organic cationic templates

Herein, we report a new uranyl-organic polyhedron U₄L₄ (L = BTPCA) assembled from uranyl and a semirigid tritopic ligand. By adjusting the carbon chain length of organic templates, two complexes can be obtained based on the diverse secondary assembly of U₄L₄ cages. The mechanism of different arrangements of U₄L₄ cages induced by organic templates was explored in detail.

Design and Applications of Water-Soluble Coordination Cages

Compartmentalization of the aqueous space within a cell is necessary for life. In similar fashion to the nanometer-scale compartments in living systems, synthetic water-soluble coordination cages (WSCCs) can isolate guest molecules and host chemical transformations. Such cages thus show promise in biological, medical, environmental, and industrial domains. This review highlights examples of three-dimensional synthetic WSCCs, offering perspectives so as to enhance their design and applications. Strategies are presented that address key challenges for the preparation of coordination cages that are soluble and stable in water. The peculiarities of guest binding in aqueous media are examined, highlighting amplified binding in water, changing guest properties, and the recognition of specific molecular targets. The properties of WSCC hosts associated with biomedical applications, and their use as vessels to carry out chemical reactions in water, are also presented. These examples sketch a blueprint for the preparation of new metal-organic containers for use in aqueous solution, as well as guidelines for the engineering of new applications in water.

Simultaneous shaping and confinement of metal-organic polyhedra in alginate-SiO2 spheres

The simultaneous shaping and confinement of Cu-based MOP in alginate-SiO2 spheres significantly enhance the mechanical strength and leaching resistance of Cu-MOP. The resulting MOP-alginate-SiO2 is shown through chemical fixation of CO2 to exhibit improved product yield over the parent Cu-MOP and Cu-alginate-SiO2.

The rise of metal-organic polyhedra

Metal-organic polyhedra are a member of metal-organic materials, and are together with metal-organic frameworks utilized as emerging porous platforms for numerous applications in energy- and bio-related sciences. However, metal-organic polyhedra have been significantly underexplored, unlike their metal-organic framework counterparts. In this review, we will cover the topologies and the classification of metal-organic polyhedra and share several suggestions, which might be useful to synthetic chemists regarding the future directions in this rapid-growing field.

Nanotrap Grafted Anion Exchangeable Hybrid Materials for Efficient Removal of Toxic Oxoanions from Water

Water pollution has attracted worldwide significant attention ever since the finding of its harmful effects on the whole ecosystem, including human health. Although several materials are known for selective removal of specific contaminants, designing a single material that can adsorb a variety of water contaminants is still a very challenging task due to a lack of proper design strategies. Herein, we have rationally designed a new class of anion exchangeable hybrid material where the nanosized cationic metal-organic polyhedra (MOP) are embedded inside a porous covalent organic framework (COF) with specific binding sites for toxic oxoanions. The resulting hybrid material exhibits very fast and selective sequestration of high as well as trace amount of a wide range of toxic oxoanions (HAsO₄ ^2-, SeO₄ ^2-, CrO₄ ^2-, ReO₄ ^-, and MnO₄ ^-) from the mixture of excessive (∼1000-fold) other interfering anions to well below the permissible drinking water limit. Moreover, the hybrid cationic nanotrap material can reduce the As(V) level from a highly contaminated groundwater sample to below the WHO permitted level.

A Zn(ii)–organic cage with semirigid ligand for solvent-free cyanosilylation and inhibitory effect on ovarian cancer cell migration and invasion ability via regulating mi-RNA16 expression

[Zn6(L)4(DMF)2(H2O)4](1,4-Dioxane)2(DMF)10(H2O)4 (1, L  =  4,4′,4″-(benzene-1,3,5-triyltris(oxy))tribenzoate), the metal-organic cage, was produced via Zn(NO3)2·6H2O reacting with the H3L ligand in the mixed solvent of DMF and water. The heterogeneous catalytic activities of the complex 1 for the aldehydes cyanidation under the conditions of free solvent were studied, which indicates that the removal of coordination solvents could greatly improve the catalytic activities. Furthermore, the inhibitory effect of the compound against the ovarian cancer cells was assessed. The mi-RNA16 relative expression level was measured after exposure to the compound with real-time reverse transcription-polymerase chain reaction. The invasion and migration of cells after compound treatment were also detected by the transwell method.

Copper Metal Organic Polyhedron (Cu-MOP) Hydrogel as Responsive Cytoprotective Shell for Living Cell Encapsulation

Single-cells coated with functional shells to protect them from external harsh condition have great potential applications in many fields such as tissue engineering, cell-based devices, cell biology, and so on. Herein, copper metal organic polyhedron (Cu-MOP) hydrogel has been applied as a soft shell for cell protection under both physical and chemical stimulations. Compared with a previous strategy, this MOP-Gel shell not only possesses more satisfied protection effect but also could be prepared and removed facilely without any damage to the encapsulated cells.

Chemical reactivity under nanoconfinement

Confining molecules can fundamentally change their chemical and physical properties. Confinement effects are considered instrumental at various stages of the origins of life, and life continues to rely on layers of compartmentalization to maintain an out-of-equilibrium state and efficiently synthesize complex biomolecules under mild conditions. As interest in synthetic confined systems grows, we are realizing that the principles governing reactivity under confinement are the same in abiological systems as they are in nature. In this Review, we categorize the ways in which nanoconfinement effects impact chemical reactivity in synthetic systems. Under nanoconfinement, chemical properties can be modulated to increase reaction rates, enhance selectivity and stabilize reactive species. Confinement effects also lead to changes in physical properties. The fluorescence of light emitters, the colours of dyes and electronic communication between electroactive species can all be tuned under confinement. Within each of these categories, we elucidate design principles and strategies that are widely applicable across a range of confined systems, specifically highlighting examples of different nanocompartments that influence reactivity in similar ways.

On/off porosity switching and post-assembly modifications of Cu4L4 metal-organic polyhedra

Synthetic porous materials composed of metal–organic polyhedra (MOPs) have found application in topical areas such as gas storage, separation and catalysis. Control over their physical properties (e.g. porosity) has typically been achieved through ligand design or judicious choice of metal ions. Here, we demonstrate pore-size control and on/off porosity in Cu₄L₄ MOPs by exploiting their structural non-rigidity. We report an aldehyde-functionalised MOP (1) that can be isolated in five distinct solvatomorphs, each exhibiting different structural flexibility. When soaked in MeOH, two of these solvatomorphs undergo a rapid transformation to a thermodynamically favoured phase, whilst in acetone they template the crystallisation of an entirely new crystal packing. We support these findings by single and powder X-ray diffraction and rationalise the observed phase transformations by lattice energy calculations. Of the five solvatomorphs, three can be obtained as solvent-exchanged pseudo-polymorphs with distinct porosities in their activated form (SA_BET = 35–455 m² g⁻¹). Further control over the crystal packing of MOPs is achieved through covalent post-assembly modifications, which promote the crystallisation of isoreticular 2-D sheet-like structures.

The crystal packing and porosity of Cu₄L₄ metal–organic polyhedra can be controlled by exploiting their rich solvatomorphism, structural non-rigidity and amenability to covalent post-assembly modifications.

Fabrication of multifunctional integrated catalysts by decorating confined Ag nanoparticles on magnetic nanostirring bars

Catalysis benefits from biomimetic materials with sophisticated structures because a variety of functions can be integrated into one structure, satisfying the demands of a diverse range of applications. Magnetic catalysts have been widely used in various applications, but the magnetic components are most commonly used for recycling. In this study, we report the fabrication of magnetic nanocatalysts composed of a support of magnetic nanobars and Ag nanoparticles confined between two silica layers. Notably, the catalysts are constructed as nanoscale stirring bars that are able to generate disturbances at this scale. More importantly, the catalysts can be applied in both macro- and micro-systems, effectively addressing the conventional mixing method. The catalysts can then be conveniently separated from the system after use. The performances of magnetic nanoscale catalysts are well maintained through recycling.

The Microscopic Structure-Property Relationship of Metal-Organic Polyhedron Nanocomposites

Monodispersed hairy nanocomposites with typical 2 nm (isophthalic acid)₂₄ Cu₂₄ metal-organic polyhedra (MOP) as a core protected by 24 polymer chains with controlled narrow molecular weight distribution has been probed by imaging and scattering studies for the heterogeneity of polymers in the nanocomposites and the confinement effect the MOPs imposing on anchored polymers. Typical confined-extending surrounded by one entanglement area is proposed to describe the physical states of the polymer chains. This model dictates the counterintuitive thermal and rheological properties and prohibited solvent exchange properties of the nanocomposites, whilst those polymer chain states are tunable and deterministic based on their component inputs. From the relationship between the structure and behavior of the MOP nanocomposites, a MOP-composited thermoplastic elastomer was obtained, providing practical solutions to improve mechanical/rheological performances and processabilities of inorganic MOPs.

Solvent-assisted coordination driven assembly of a supramolecular architecture featuring two types of connectivity from discrete nanocages

A 3D nanocage architecture with two types of connectivity was successfully assembled from discrete supramolecular nanocages.

The rapid development of supramolecular chemistry provides a powerful bottom-up approach to construct various well-defined nano-architectures with increasing complexity and functionality. Compared to that of small and simple nanometric objects, the self-assembly of larger and more complex nanometric objects, such as nanocages, remains a significant challenge. Herein, we used a discrete nanocage as the monomer to successfully construct a novel three-dimensional (3D) supramolecular architecture, which comprises two types of nanocage building units with different connectivity, using the solvent-assisted coordination-driven assembly approach. The mechanism of this supramolecular assembly process was investigated by electrospray ionization mass spectrometry (ESI-MS) studies, which identified for the first time the formation of a nanocage dimer intermediate during the assembly process. The assembly of discrete nanocages into a 3D supramolecular architecture led to remarkable enhancement of stability and gas adsorption properties.

MOP × MOF: Collaborative Combination of Metal-Organic Polyhedra and Metal-Organic Framework for Proton Conductivity

We report a hybrid solid system, UMOM-100-a and UMOM-100-b, synthesized by incorporation of Cu-based metal-organic polyhedra (MOPs) into a porous metal-organic framework (MOF) host, PCN-777. The MOP guests have acid (SO₃^-) functional groups, acting as functionalized nanocages, whereas the porosity is still maintained for proton conductivity. The key parameter for the UMOM-100 series is the number of MOPs inside a MOF, which controls the ratio between meso- and micropores, polarity, and finally proton conductivity. This is an example demonstrating a new design strategy for porous solids to add active components into porous MOFs, opening up possibilities in other applications such as solid-state electrolytes and heterogeneous catalysts.

Conversion of Metal-Organic Cage to Ligand-Free Ultrasmall Noble Metal Nanocluster Catalysts Confined within Mesoporous Silica Nanoparticle Supports

Supported ultrasmall noble metal nanocluster-based (UNMN-based) catalysts are one of the most important classes of solid materials for heterogeneous catalysis. In this work, we present a novel strategy for the controlled synthesis of ligand-free UNMN nanocatalysts based on in situ reduction of a palladium-based (Pd-based) metal-organic cage (MOC) confined within monosized, thiol-modified mesoporous silica nanoparticle (MSN) supports. By taking advantage of the high mutual solubility of MOCs and MSNs in DMSO and the strong interactions between the thiol-modified MSN pore wall and MOC surface, a good dispersion of MOC molecules was achieved throughout the MSN support. The close correspondence of the MSN pore diameter (ca. 5.0 nm) with the diameter of the MOC (ca. 4.0 nm) confines MOC packing to approximately a monolayer. Based on this spatial constraint and electrostatic binding of the MOC to the thiol-modified MSN pore surface, in situ MOC reduction followed by metal atom diffusion, coalescence, and anchoring on the active sites resulted in ligand-free Pd-based UNMNs of approximately 0.9 ± 0.2 nm in diameter decorating the MSN pore surfaces. Control experiments of the reduction of a conventional palladium source or the reduction of free, unconstrained cages in solution under the same conditions only produced large metal nanocrystals (NP, >2 nm), confirming the importance of confined reduction to achieve a highly catalytically active surface. In light of this strategy, two catalytic experiments including the reaction of 4-nitrophenol to 4-aminophenol and the Suzuki C-C coupling reaction show superior catalytic activity of the engineered MSN-supported UNMN nanocatalysts compared to their free form and state of the art commercial catalysts. We believe that our new strategy will open new avenues for artificially designed UNMN-inspired nanoarchitectures for wide applications.