Correlation between the Selectivity and the Structure of an Asymmetric Catalyst Built on a Chirally Amplified Supramolecular Helical Scaffold

Chiral Supramolecular Self-Assembly Catalysts with Enhanced Metal Ion Interaction for Higher Enantioselectivity

Understanding the interaction between metal ions as catalytic centers and supramolecular scaffolds as chiral substrates plays an important role in developing chiral supramolecular catalysts with high enantioselectivity. Herein, we found that compared with l-norleucine chiral amphiphile (l-NorC16), l-methionine chiral amphiphile (l-MetC16) with the only heteroatom of S site difference in the hydrophilic group can form a similar supramolecular chiral nanoribbon (NR) with the bilayer structure through the self-assembly approach; yet, the interaction between the Cu(II) ion catalytic centers and supramolecular scaffolds is reinforced, favoring the chirality transfer and therefore enhancing their catalytic enantioselectivity of Diels-Alder reaction from 23% [l-NorC16-NR-Cu(II)] to 78% [l-MetC16-NR-Cu(II)]. Our work demonstrates a new strategy from the perspective of strengthening the metal ion-supramolecular scaffold interaction for the preparation of chiral supramolecular catalysts with good catalytic enantioselectivity.

Self-Assembled Metal-Coordination Nanohelices as Efficient and Robust Chiral Supramolecular Catalysts for Enantioselective Reactions

The development of chiral nanostructures-based supramolecular catalysts with satisfied enantioselectivity remains a significantly more challenging task. Herein, the synthesis and self-assembly of various amino acid amphiphiles as chiral supramolecular catalysts after metal ion coordination is reported and systematically investigate their enantioselectivity in asymmetric Diels-Alder reactions. In particular, the self-assembly of l/d-phenylglycine-based amphiphiles (l/d-PhgC16) and Cu(II) into chiral supramolecular catalysts in the methanol/water solution mixture is described, which features the interesting M/P nanohelices (diameter ≈8 nm) and mostly well-aligned M/P nanoribbons (NRs). The M/P supramolecular catalysts show both high but inverse enantioselectivity (>90% ee) in Diels-Alder reactions, while their monomeric counterparts display nearly racemic products. Analysis of the catalytic results suggests the outstanding enantioselectivities are closely related to the specific stereochemical microenvironment provided by the arrangement of the amphiphiles in the supramolecular assembly. Based on the experimental evidence of chirality transfer from supramolecular nanohelices to coordinated Cu(II) and substrate aza-chalcone and the molecular dynamics simulations, the enantioselective catalytic mechanisms are proposed. Moreover, the relationships between molecular structures of amino acid amphiphiles (the hydrophilic head group and hydrophobic alkyl chain length) in supramolecular catalysts and enantioselectivity in Diels-Alder reactions are elaborated.

Switchable supramolecular helices for asymmetric stereodivergent catalysis

Despite recent developments on the design of dynamic catalysts, none of them have been exploited for the in-situ control of multiple stereogenic centers in a single molecular scaffold. We report herein that it is possible to obtain in majority any amongst the four possible stereoisomers of an amino alcohol by means of a switchable asymmetric catalyst built on supramolecular helices. Hydrogen-bonded assemblies between a benzene-1,3,5-tricarboxamide (BTA) achiral phosphine ligand coordinated to copper and a chiral BTA comonomer are engaged in a copper-hydride catalyzed hydrosilylation and hydroamination cascade process. The nature of the product stereoisomer is related to the handedness of the helices and can thus be directed in a predictable way by changing the nature of the major enantiomer of the BTA comonomer present in the assemblies. The strategy allows all stereoisomers to be obtained one-pot with similar selectivities by conducting the cascade reaction in a concomitant manner, i.e. without inverting the handedness of the helices, or sequentially, i.e. by switching the handedness of the supramolecular helices between the hydrosilylation and hydroamination steps. Supramolecular helical catalysts appear as a unique and versatile platform to control the configuration of molecules or polymers embedding several stereogenic centers.

Phenylglycine amphiphile-metal ion chiral supramolecular nanozymes for enantioselective catalysis

L/D-Phenylglycine amphiphiles and metal ions with peroxidase-like activity self-assembled into chiral nanoribbons, which act as efficient chiral supramolecular nanozymes for catalyzing the 3,4-dihydroxy-L/D-phenylalanine (L/D-DOPA) oxidation reactions. The catalytic efficiency and enantioselectivity are dominated by the chirality transfer and the synergistic effect between the metal ions and chiral nanoribbons.

Chiral Supramolecular Organogel Constructed Using Riboflavin and Melamine: Its Application in Photo-Catalyzed Colorimetric Chiral Sensing and Enantioselective Adsorption

The synthesis of a chiral supramolecular organogel via the hierarchical helical self-assembly of optically active riboflavin and melamine derivatives is described herein. Owing to the photocatalysis of riboflavin and the supramolecular chirality induced in the helically stacked riboflavin/melamine complex, the gel is observed to act as a light-stimulated chiral sensor of optically active alcohols by detecting the change in color from yellow to green. The gel also served as an efficient chiral adsorbent, enabling optical resolution of a racemic compound with high chiral recognition ability.

Metallo-Supramolecular Helical Fibres from Chiral Phenylacetylene Monomers: Cation Induced Self-Assembly

Chiral metallo-supramolecular fibres can be easily obtained by mixing a chloroform solution of a phenylacetylene monomer (PA) that bears a chiral sulfoxide group as pendant, with different equivalents of a methanolic solution of AgClO4 . Thus, while the PA is found molecularly dissolved in chloroform, the addition of Ag+ ions induce its aggregation through the formation of an axially chiral metallo-supramolecular aggregate with high thermal stable properties. In this case, the ability of the metal ion to coordinate the PA triple bond, combined with the argentophilicity of the metal ion and the planarity of the phenylacetylene drives to the formation of a helical coordination polymer, whose P or M axial chirality is determined by the chirality of the sulfoxide used as substituent of the PA. Depending on the PA/Ag+ (mol/mol) ratio, it is possible to tune the morphology of the metallo-supramolecular aggregate from chiral fibers to chiral gel.

Chiral supramolecular polymers

As an active branch within the field of supramolecular polymers, chiral supramolecular polymers (SPs) are an excellent benchmark to generate helical structures that can clarify the origin of homochirality in Nature or help determine new exciting functionalities of organic materials. Herein, we highlight the most utilized strategies to build up chiral SPs by using chiral monomeric units or external stimuli. Selected examples of transfer of asymmetry, in which the point or axial chirality contained by the monomeric units is efficiently transferred to the supramolecular scaffold yielding enantioenriched helical structures, will be presented. The importance of the thermodynamics and kinetics associated with those processes is stressed, especially the influence that parameters such as the helix reversal and mismatch penalties exert on the achievement of amplification of asymmetry in co-assembled systems will also be considered. Remarkable examples of breaking symmetry, in which chiral supramolecular polymers can be attained from achiral self-assembling units by applying external stimuli like stirring, solvent or light, are highlighted. Finally, the specific and promising applications of chiral supramolecular polymers are presented with recent relevant examples.

Controlling the Enantioselectivity in an Adaptable Ligand by Biomimetic Intramolecular Interlocking

For the preparation of chiral drugs, both stereochemically stable and flexible catalysts in combination with chiral auxiliaries can be used. Here, chiral induction plays an important role in generating an enantiomerically pure catalyst. We demonstrate a successful approach to the spontaneous deracemization of tropos ligands for asymmetric catalysis. Three different constitutional isomers of a bisphosphinite ligand decorated with l-valine moieties (interaction units) linked to the flexible biphenyl system by a phenylene bridge for inducing a chiral switch were prepared. The substitution pattern's influence on the attached intermolecular recognition sites was systematically investigated. We can show that biomimetic intramolecular hydrogen bonding leads to a pronounced diastereoselective enrichment of one of the ligand stereoisomers. As a result, in the asymmetric Rh-catalyzed hydrogenation of prochiral olefins using these ligands, enantiomeric ratios of up to 95.8:4.2 (S) were obtained. Of particular note is the inversion of enantioselectivity relative to the previously reported BIBIPHOS-Rh catalyst due to the altered orientation of the biphenyl moiety from (R_ax) to (S_ax). The enantioselectivities achieved by appropriate intramolecular interlocking are remarkable for a tropos ligand/catalyst. The strategy presented here represents a powerful approach for the spontaneous alignment of tropos ligands, yielding high enantioselectivities in asymmetric catalysis.

Hierarchical self-assembly of aromatic peptide conjugates into supramolecular polymers: it takes two to tango

Supramolecular polymers are self-assembled materials displaying adaptive and responsive "life-like" behaviour which are often made of aromatic compounds capable of engaging in π-π interactions to form larger assemblies. Major advances have been made recently in controlling their mode of self-assembly, from thermodynamically-controlled isodesmic to kinetically-controlled living polymerization. Dynamic covalent chemistry has been recently implemented to generate dynamic covalent polymers which can be seen as dynamic analogues of biomacromolecules. On the other hand, peptides are readily-available and structurally-rich building blocks that can lead to secondary structures or specific functions. In this context, the past decade has seen intense research activity in studying the behaviour of aromatic-peptide conjugates through supramolecular and/or dynamic covalent chemistries. Herein, we review those impressive key achievements showcasing how aromatic- and peptide-based self-assemblies can be combined using dynamic covalent and/or supramolecular chemistry, and what it brings in terms of the structure, self-assembly pathways, and function of supramolecular and dynamic covalent polymers.

Controlling the length of porphyrin supramolecular polymers via coupled equilibria and dilution-induced supramolecular polymerization

Multi-component systems often display convoluted behavior, pathway complexity and coupled equilibria. In recent years, several ways to control complex systems by manipulating the subtle balances of interaction energies between the individual components have been explored and thereby shifting the equilibrium between different aggregate states. Here we show the enantioselective chain-capping and dilution-induced supramolecular polymerization with a Zn²⁺-porphyrin-based supramolecular system when going from long, highly cooperative supramolecular polymers to short, disordered aggregates by adding a monotopic Mn³⁺-porphyrin monomer. When mixing the zinc and manganese centered monomers, the Mn³⁺-porphyrins act as chain-cappers for Zn²⁺-porphyrin supramolecular polymers, effectively hindering growth of the copolymer and reducing the length. Upon dilution, the interaction between chain-capper and monomers weakens as the equilibria shift and long supramolecular polymers form again. This dynamic modulation of aggregate morphology and length is achieved through enantioselectivity in the aggregation pathways and concentration-sensitive equilibria. All-atom and coarse-grained molecular simulations provide further insights into the mixing of the species and their exchange dynamics. Our combined experimental and theoretical approach allows for precise control of molecular self-assembly and chiral discrimination in complex systems.

Tunable induced circular dichroism in gels

The ICD phenomenon has drawn a lot of attention in recent years in applicable fields such as chiral sensing and chiroptical devices. In this work, we first gaze at the issues of thin spin-coated films not being able to deliver consistent ICD signals. A hypothesis of the underlying problem is proposed through a brief elucidation of the spin-coating process. To confirm and eliminate the uncontrollable dynamic factors with spin coating, we then dedicate our efforts to develop a new gel system based on chiral L-/D-N',N'-Dibenzoyl-cystine. Achiral dye molecules are intercalated in a DBC gel through a "one-step" preparation procedure. Compared to the former spin-coating system, significantly improved reproducibility of the new gel system is demonstrated. Besides, the ICD signals can be customized in a broad spectral range (wavelength tunability) by substituting dye molecules. Finally, we discuss the potential applications of this interesting system.

Asymmetric hydroamination with far fewer chiral species than copper centers achieved by tuning the structure of supramolecular helical catalysts

Mixing a BTA ligand (in black), a “sergeant” (in blue) and an achiral BTA additive (in orange) affords the amination product in 75% e.e. even though only one “sergeant” for ca. 10 copper centers are present in the supramolecular helical catalyst.

Recent advances in asymmetric organocatalysis based on helical polymers

The significant research progress (from 2011 to 2021) in artificial helical polymers, such as polyacetylenes, polyisocyanides, polycarbenes, etc., in the fields of asymmetric organocatalysis is described.

Anisotropic nanomaterials for asymmetric synthesis

The production of enantiopure chemicals is an essential part of modern chemical industry. Hence, the emergence of asymmetric catalysis led to dramatic changes in the procedures of chemical synthesis, and now it provides the most advantageous and economically executable solution for large-scale production of chiral chemicals. In recent years, nanostructures have emerged as potential materials for asymmetric synthesis. Indeed, on the one hand, nanomaterials offer great opportunities as catalysts in asymmetric catalysis, due to their tunable absorption, chirality, and unique energy transfer properties; on the other hand, the advantages of the larger surface area, increased number of unsaturated coordination centres, and more accessible active sites open prospects for catalyst encapsulation, partial or complete, in a nanoscale cavity, pore, pocket, or channel leading to alteration of the chemical reactivity through spatial confinement. This review focuses on anisotropic nanomaterials and considers the state-of-the-art progress in asymmetric synthesis catalysed by 1D, 2D and 3D nanostructures. The discussion comprises three main sections according to the nanostructure dimensionality. We analyze recent advances in materials and structure development, discuss the functional role of the nanomaterials in asymmetric synthesis, chirality, confinement effects, and reported enantioselectivity. Finally, the new opportunities and challenges of anisotropic 1D, 2D, and 3D nanomaterials in asymmetric synthesis, as well as the future prospects and current trends of the design and applications of these materials are analyzed in the Conclusions and outlook section.

Depolymerization of supramolecular polymers by a covalent reaction; transforming an intercalator into a sequestrator

Controlling the reciprocity between chemical reactivity and supramolecular structure is a topic of great interest in the emergence of molecular complexity. In this work, we investigate the effect of a covalent reaction as a trigger to depolymerize a supramolecular assembly. We focus on the impact of an in situ thiol-ene reaction on the (co)polymerization of three derivatives of benzene-1,3,5-tricarboxamide (BTA) monomers functionalized with cysteine, hexylcysteine, and alkyl side chains: Cys-BTA, HexCys-BTA, and a-BTA. Long supramolecular polymers of Cys-BTA can be depolymerized into short dimeric aggregates of HexCys-BTA via the in situ thiol-ene reaction. Analysis of the system by time-resolved spectroscopy and light scattering unravels the fast dynamicity of the structures and the mechanism of depolymerization. Moreover, by intercalating the reactive Cys-BTA monomer into an unreactive inert polymer, the in situ thiol-ene reaction transforms the intercalator into a sequestrator and induces the depolymerization of the unreactive polymer. This work shows that the implementation of reactivity into supramolecular assemblies enables temporal control of depolymerization processes, which can bring us one step closer to understanding the interplay between non-covalent and covalent chemistry.

Single-Handed Double Helix and Spiral Platelet Formed by Racemate of Dissymmetric Cages

Spontaneous deracemization has been used to separate homochiral domains from the racemic system. However, homochirality can only be referred to when the scales of these domains and systems are specified. To clarify this, we report self-assembly of racemates of dissymmetric cages DC-1 with a cone-shape propeller geometry, forming a centrosymmetric columnar crystalline phase (racemic at crystallographic level). Owing to their anisotropic geometry, the two enantiomers are packed in a frustrated fashion in this crystalline phase; single-handed double helices are observed (single-handedness at supramolecular level). The frustrated packing (layer continuity break-up) in turn facilitates screw dislocation during the crystal growth, forming left- or right-handed spiral platelets (symmetry-breaking at morphological level), although each platelet is composed of DC-1 racemates. The symmetry correlation between DC-1 molecules, the crystalline phase and spiral platelets, all exhibit C₃ symmetry.

From Oligo(Phenyleneethynylene) Monomers to Supramolecular Helices: The Role of Intermolecular Interactions in Aggregation

Supramolecular helices that arise from the self-assembly of small organic molecules via non-covalent interactions play an important role in the structure and properties of the corresponding materials. Here we study the supramolecular helical aggregation of oligo(phenyleneethynylene) monomers from a theoretical point of view, always guiding the studies with experimentally available data. In this way, by systematically increasing the number of monomer units, optimized n-mer geometries are obtained along with the corresponding absorption and circular dichroism spectra. For the geometry optimizations we use density functional theory together with the B3LYP-D3 functional and the 6–31G** basis set. For obtaining the spectra we resort to time-dependent density functional theory using the CAM-B3LYP functional and the 3–21G basis set. These combinations of density functional and basis set were selected after systematic convergence studies. The theoretical results are analyzed and compared to the experimentally available spectra, observing a good agreement.

The Competitive Aggregation Pathway of an Asymmetric Chiral Oligo(p-phenyleneethynylene) Towards the Formation of Individual P and M Supramolecular Helical Polymers

A complex aggregation pathway towards two diastereomeric P and M supramolecular helices arises from the aggregation of a short, chiral, and rigid oligo(phenyleneethynylene) [OPE, (S)-1]. Thus, while Agg_I aggregate is obtained when a DCM solution of (S)-1 is diluted with MCH at room temperature, Agg_II aggregate is generated only after a slow heating (353 K)/cooling (273 K) process. Interestingly, during Agg_I formation (mechanism 1), short P chain oligomers are produced, which have a great tendency to aggregate in plane, yielding brick-like nanostructures that halt the aggregation process. On the other hand, after a heating/cooling cycle, long M type columnar helical aggregates (Agg_II ) are obtained, formed by individual supramolecular polymer chains (mechanism 2) easily visualized by AFM. The two different P/M orientations obtained for Agg_I and Agg_II reveal the dynamic character of the system and its ability to create diastereomeric helical structures under the right conditions. Different experimental protocols were explored to prepare long M type columnar helical aggregates, which are not obtained by using the previous MCH/DCM 99/1 (v/v) solvent mixture. The generation of the desired M oriented supramolecular polymer is achieved when toluene is added to the solvent mixture in a 97/2/1 MCH/Tol/DCM (v/v/v) ratio.

Experimental and computational diagnosis of the fluxional nature of a benzene-1,3,5-tricarboxamide-based hydrogen-bonded dimer

Precise characterization of the hydrogen bond network present in discrete self-assemblies of benzene-1,3,5-tricarboxamide monomers derived from amino-esters (ester BTAs) is crucial for the construction of elaborated functional co-assemblies. For all ester BTA dimeric structures previously reported, ester carbonyls in the side chain acted as hydrogen bond acceptors, yielding well-defined dimers stabilized by six hydrogen bonds. The ester BTA monomer derived from glycine (BTA Gly) shows a markedly different self-assembly behaviour. We report herein a combined experimental and computational investigation aimed at determining the nature of the dimeric species formed by BTA Gly. Two distinct dimeric structures were characterized by single-crystal X-ray diffraction measurements. Likewise, a range of spectroscopic and scattering techniques as well as molecular modelling were employed to diagnose the nature of dynamic dimeric structures in toluene. Our results unambiguously establish that both ester and amide carbonyls are involved in the hydrogen bond network of the discrete dimeric species formed by BTA Gly. The participation of roughly 4.5 ester carbonyls and 1.5 amide carbonyls per dimer as determined by FT-IR spectroscopy implies that several conformations coexist in solution. Moreover, NMR analysis and modelling data reveal rapid interconversion between these different conformers leading to a symmetric structure on the NMR timescale. Rapid hydrogen bond shuffling between conformers having three (three), two (four), one (five) and zero (six) amide carbonyl groups (ester carbonyl groups, respectively) as hydrogen bond acceptors is proposed to explain the magnetic equivalence of the amide N-H on the NMR timescale. When compared to other ester BTA derivatives in which only ester carbonyls act as hydrogen bond acceptors, the fluxional behaviour of the hydrogen-bonded dimers of BTA Gly likely originates from a larger range of energetically favorable conformations accessible through rotation of the BTA side chains.

Dissecting the Role of the Sergeants in Supramolecular Helical Catalysts: From Chain Capping to Intercalation

Controlling the properties of supramolecular assemblies requires unveiling the specific interactions between their components. In the present work, the catalytic properties and structure of co-assemblies composed of a benzene-1,3,5-tricarboxamide (BTA) ligand coordinated to copper (the soldier) and seven enantiopure BTAs (the sergeants) have been determined. Whatever the sergeant, the enantioselectivity of the reaction is directly proportional to the optical purity of the supramolecular helices. More strikingly, the role played by the sergeant in the co-assembly process differs significantly: from almost pure intercalator (when it is incorporated in the stacks of the soldier and generates long homochiral helices) to pure chain capper (when it leads to the formation of partly helically biased and short assemblies). The former situation leads to optimal enantioselectivity for the catalytic system under study (58 % ee) while the latter situation leads to very low selectivity (8 % ee). The successful rationalization of this high and unexpected difference is crucial for the development of more efficient catalysts and more elaborate supramolecular systems.

Defects and defect engineering in Soft Matter

Soft matter covers a wide range of materials based on linear or branched polymers, gels and rubbers, amphiphilic (macro)molecules, colloids, and self-assembled structures. These materials have applications in various industries, all highly important for our daily life, and they control all biological functions; therefore, controlling and tailoring their properties is crucial. One way to approach this target is defect engineering, which aims to control defects in the material's structure, and/or to purposely add defects into it to trigger specific functions. While this approach has been a striking success story in crystalline inorganic hard matter, both for mechanical and electronic properties, and has also been applied to organic hard materials, defect engineering is rarely used in soft matter design. In this review, we present a survey on investigations on defects and/or defect engineering in nine classes of soft matter composed of liquid crystals, colloids, linear polymers with moderate degree of branching, hyperbranched polymers and dendrimers, conjugated polymers, polymeric networks, self-assembled amphiphiles and proteins, block copolymers and supramolecular polymers. This overview proposes a promising role of this approach for tuning the properties of soft matter.

Supramolecular Chiral Aggregates Exhibiting Nonlinear CD-ee Dependence

Although a linear relationship between the optical activity (normally the CD signal) and the enantiomeric excess (ee) of chiral auxiliaries has been the most commonly observed dependence in dynamic supramolecular helical aggregates, positive nonlinear CD-ee dependence, known as the "majority-rules effect" (MRE), indicative of chiral amplification, has also been well documented and to some extent understood. In sharp contrast, the negative nonlinear CD-ee dependence has been much less reported and is not well understood. Here, the state of the art of both the positive and negative nonlinear CD-ee dependence in noncovalently bound supramolecular helical aggregates is summarized, with the hope that the vast examples of supramolecular aggregates showing positive nonlinear dependence, in terms of the methods of investigations, variations in the structure of the building block (single species or multiple species), and theoretical modeling using the mismatch penalty energy and helix reversal penalty energy, would help to guide the design of building blocks to form aggregates showing negative nonlinear dependence, and thus to understand the mechanisms. The potential applications of those functional supramolecular aggregates are also discussed.

Controlling the Length of Cooperative Supramolecular Polymers with Chain Cappers

The design and the characterization of supramolecular additives to control the chain length of benzene-1,3,5-tricarboxamide (BTA) cooperative supramolecular polymers under thermodynamic equilibrium is unraveled. These additives act as chain cappers of supramolecular polymers and feature one face as reactive as the BTA discotic to interact strongly with the polymer end, whereas the other face is nonreactive and therefore impedes further polymerization. Such a design requires fine tuning of the conformational preorganization of the amides and the steric hindrance of the motif. The chain cappers studied are monotopic derivatives of BTA, modified by partial N-methylation of the amides or by positioning of a bulky cyclotriveratrylene cage on one face of the BTA unit. This study not only clarifies the interplay between structural variations and supramolecular interactions, but it also highlights the necessity to combine orthogonal characterization methods, spectroscopy and light scattering, to elucidate the structures and compositions of supramolecular systems.

Helical supramolecular polymers with rationally designed binding sites for chiral guest recognition

Since various helical supramolecular polymers became available, their application to molecular chirality recognition have been anticipated but not extensively studied. So far, only a few examples of chiral reactions have been reported, but none for chiral separation. Here, we report the application of a helical supramolecular polymer to the enantio-separation of chiral guest molecules. The monomer of this supramolecular polymer is the salt-pair of a dendritic carboxylic acid with an enantiopure amino alcohol. In an apolar solvent, this salt-pair stacks via hydrogen bonds to form a helical polymer. In conjunction with this carboxylic acid, various amino alcohols afford supramolecular polymers, whose helical handedness is determined by the stereochemistry of the amino alcohols. When two salts with the same chirality are mixed, they undergo copolymerization, while those with opposite chirality do not. Owing to this stereoselective copolymerizability, the helical supramolecular polymer could bias the enantiomeric composition of chiral amino alcohols.

Since various helical supramolecular polymers became available, their application in molecular chirality recognition have been anticipated but not extensively studied. Here, the authors report the application of a helical supramolecular polymer for the enantio separation of chiral guest molecules.

Emergence of Homochiral Benzene-1,3,5-tricarboxamide Helical Assemblies and Catalysts upon Addition of an Achiral Monomer

Chirality amplification refers to the ability of a small chiral bias to fully control the main chain helicity of polymers and assemblies. Further implementation of functional chirally amplified helices as switchable asymmetric catalysts, chiral sensors, and circularly polarized light emitters will require a greater control of the energetics governing these chirality amplification effects. In this work, we report on the counterintuitive ability of an achiral molecule to suppress conformational defects in supramolecular helices, thus leading to the emergence of homochirality in a system containing a very small chiral bias. We focus our investigation on supramolecular helices composed of an achiral benzene-1,3,5-tricarboxamide (BTA) ligand, coordinated to copper, and an enantiopure BTA comonomer. Amplification of chirality as probed by varying the amount (sergeants and soldiers effect) or the optical purity (diluted majority-rules effect) of the enantiopure comonomer are modest in this initial system. However, both effects are hugely enhanced upon addition of a second achiral BTA monomer, leading to a perfect control of the helicity either by means of a remarkably low amount of sergeants (0.5%) or a small bias from a racemic mixture of enantiopure comonomers (10% ee). Such an enhancement in the amplification of chirality is only achieved by mixing the three components, i.e. the two achiral and the enantiopure comonomers, highlighting a synergistic effect upon coassembly of the three monomers. Investigation of the role of the achiral additive by multifarious analytical techniques supports its ability to stabilize the helical coassemblies and suppress helix reversals: i.e., conformational defects. Implementation of these helical copper precatalysts in the hydrosilylation of 1-(4-nitrophenyl)ethanone confirms that the effect of the achiral BTA additive is also operative under the conditions of the catalytic experiment. A highly enantioenriched product (90% ee) is produced by a supramolecular catalyst operating with ppm levels of chiral species.

Helical Assemblies of One-Dimensional Supramolecular Polymers Composed of Helical Macromolecules: Generation of Circularly Polarized Light Using an Infinitesimal Chiral Source

We report the synthesis of one-dimensional supramolecular polymers composed of one-handed helical macromolecules bearing fluorescent pendant groups and the generation of circularly polarized light on the basis of hierarchical chiral amplification starting from a tiny amount of chiral substituent. Copolymerization of benzo[1,2-b:4,5-b']dithiophene-appended achiral/chiral isocyanides (99:1, mol/mol) with a solid-state photoluminescence feature afforded submicrometer supramolecular fibers, in which almost perfect single-handed helical polyisocyanides were noncovalently connected end to end. The resulting helical supramolecular polymers were further helically assembled to form a cholesteric liquid crystal film with an intense circularly polarized luminescence (CPL) signal. Surprisingly, the supramolecular system containing only 0.01 mol % of the chiral monomer unit also emitted the observable circularly polarized light owing to multiple chiral amplification from an infinitesimal point chirality to helical chirality and then to supramolecular chirality. Furthermore, chiral information was efficiently transferred from the helically assembled supramolecular system containing 1 mol % of the chiral unit to achiral dye molecules blended in the film, allowing full-color tunable induced CPL with luminescence dissymmetry factors greater than 1.0 × 10^-2. This unprecedentedly strong chiral amplification enables the creation of helical supramolecular polymers and chirally assembled systems with various chiral functions based solely on an infinitesimal chiral source.

Peptide interdigitation-induced twisted nanoribbons as chiral scaffolds for supramolecular nanozymes

Establishing reliable strategies for rationally manipulating the organization of peptide building blocks and thereby precisely creating chiral nanostructures is challenging, while meaningful toward development of advanced functional materials. Here we report on a peptide-interdigitating mechanism for the reliable self-assembly of lipid-inspired amphiphiles (LIPIAs) into robust twisted nanoribbons by grafting domains to one alkyl tail of lipids as an extended element. Peptide interdigitation promoted the self-assembly of LIPIAs into twisted or flat nanoribbons driven by antiparallel or parallel β-sheet hydrogen bonds, respectively, strongly associated with the connecting direction of the incorporated domains. We found that the LIPIAs containing N-terminus-connected domains with either bulky or small side chain groups formed twisted nanoribbons in a broad pH range, thus implying a sequence- and pH-independent strategy for creation of robust chiral nanostructures. Integrating the resulting twisted nanoribbons with gold nanoparticles led to supramolecular nanozymes exhibiting the excellent catalytic activity and enantioselectivity of asymmetric oxidation of 3,4-dihyroxy-phenylalanine molecules. Our finding demonstrates that the peptide-interdigitating mechanism is a reliable strategy for precise creation of chiral nanostructures serving as chiral matrices for supramolecular nanozymes with improved catalytic performance, thus potentially paving the way towards advanced biomimetic systems resembling natural systems.

Chiral bisphosphine ligands based on quinoline oligoamide foldamers: application in asymmetric hydrogenation

A series of chiral bisphosphine ligands were designed and synthesized based on single-handed quinoline oligoamide foldamers. The bisphosphine ligands can coordinate with Rh(cod)₂BF₄ in a 1 : 1 stoichiometry and the resulted chiral Rh(i) catalysts were applied in the asymmetric hydrogenation of α-dehydroamino acid esters, in which excellent conversions and promising levels of enantioselectivity were achieved.

Tuning the Length of Cooperative Supramolecular Polymers under Thermodynamic Control

In the field of supramolecular (co)polymerizations, the ability to predict and control the composition and length of the supramolecular (co)polymers is a topic of great interest. In this work, we elucidate the mechanism that controls the polymer length in a two-component cooperative supramolecular polymerization and unveil the role of the second component in the system. We focus on the supramolecular copolymerization between two derivatives of benzene-1,3,5-tricarboxamide (BTA) monomers: a-BTA and Nle-BTA. As a single component, a-BTA cooperatively polymerizes into long supramolecular polymers, whereas Nle-BTA only forms dimers. By mixing a-BTA and Nle-BTA in different ratios, two-component systems are obtained, which are analyzed in-depth by combining spectroscopy and light-scattering techniques with theoretical modeling. The results show that the length of the supramolecular polymers formed by a-BTA is controlled by competitive sequestration of a-BTA monomers by Nle-BTA, while the obvious alternative Nle-BTA acts as a chain-capper is not operative. This sequestration of a-BTA leads to short, stable species coexisting with long cooperative aggregates. The analysis of the experimental data by theoretical modeling elucidates the thermodynamic parameters of the copolymerization, the distributions of the various species, and the composition and length of the supramolecular polymers at various mixing ratios of a-BTA and Nle-BTA. Moreover, the model was used to generalize our results and to predict the impact of adding a chain-capper or a competitor on the length of the cooperative supramolecular polymers under thermodynamic control. Overall, this work unveils comprehensive guidelines to master the nature of supramolecular (co)polymers and brings the field one step closer to applications.

Asymmetric catalysis mediated by a mirror symmetry-broken helical nanoribbon

Although chirality has been recognized as an essential entity for life, it still remains a big mystery how the homochirality in nature emerged in essential biomolecules. Certain achiral motifs are known to assemble into chiral nanostructures. In rare cases, their absolute geometries are enantiomerically biased by mirror symmetry breaking. Here we report the first example of asymmetric catalysis by using a mirror symmetry-broken helical nanoribbon as the ligand. We obtain this helical nanoribbon from a benzoic acid appended achiral benzene-1,3,5-tricarboxamide by its helical supramolecular assembly and employ it for the Cu²⁺-catalyzed Diels–Alder reaction. By thorough optimization of the reaction (conversion: > 99%, turnover number: ~90), the enantiomeric excess eventually reaches 46% (major/minor enantiomers = 73/27). We also confirm that the helical nanoribbon indeed carries helically twisted binding sites for Cu²⁺. Our achievement may provide the fundamental breakthrough for producing optically active molecules from a mixture of totally achiral motifs.

If asymmetric catalysts were available by mirror symmetry breaking, an important insight may be given to how the biomolecular homochirality emerged in nature. Here, the authors report the first example of asymmetric catalysis by employing mirror symmetry-broken helical nanoribbons as the ligand.

A Competing Hydrogen Bonding Pattern to Yield a Thermo-Thickening Supramolecular Polymer

Introduction of competing interactions in the design of a supramolecular polymer (SP) creates pathway complexity. Ester-bis-ureas contain both a strong bis-urea sticker that is responsible for the build-up of long rod-like objects by hydrogen bonding and ester groups that can interfere with this main pattern in a subtle way. Spectroscopic (FTIR and CD), calorimetric (DSC), and scattering (SANS) techniques show that such ester-bis-ureas self-assemble into three competing rod-like SPs. The previously unreported low-temperature SP is stabilized by hydrogen bonds between the interfering ester groups and the urea moieties. It also features a weak macroscopic alignment of the rods. The other structures form isotropic dispersions of rods stabilized by the more classical urea-urea hydrogen bonding pattern. The transition from the low-temperature structure to the next occurs reversibly by heating and is accompanied by an increase in viscosity, a rare feature for solutions in hydrocarbons.

Induced Circular Dichroism of Isotactic Poly(2-vinylpyridine) with Diverse and Tunable "Sergeants-and-Soldiers" Type Chiral Amplification

Facile and efficient construction of the helical structure with diverse and tunable chiral amplification from an achiral polymer is attractive but remains a challenge to develop multiple functional materials. We report herein a macromolecular acid-base complex of highly isotactic poly(2-vinylpyridine) (mmmm > 99%), (+)-camphorsulfonic acid, and dodecylbenzensulfonic acid. The asymmetric induction of the chiral additive through the ionic interactions between pyridinium pendants and acid ions drives the polymer backbone to twist in a preferred direction in CHCl₃ and its mixture with CH₃CN. The sign and intensity of induced circular dichroism rely on the base to acid ratio, the chiral acid content, and the solvent nature. By systematically tuning the solvent composition, four distinct types of "sergeants-and-soldiers" mode chiral amplification are achieved for the first time within a single system owing to the solvent dependent bias of chiral-chiral and chiral-achiral ion pairs.

Hierarchy of Asymmetry in Chiral Supramolecular Polymers: Toward Functional, Helical Supramolecular Structures

The formation of helical structures through the supramolecular polymerization of a variety of self-assembling units is reviewed. These scaffolds are usually obtained by efficient transfer or amplification of chirality phenomena, in which the starting self-assembling molecules possess different elements of asymmetry, such as point or axial chirality. Relevant examples of helical supramolecular structures investigated under thermodynamic control are reviewed, and the helical outcome of remarkable examples of chiral entities obtained through kinetic control are also highlighted. Finally, selected examples of flexible macroscopic chirality and catalysis are described to illustrate the applicability of helical aggregates.

The chiral amine triggered self-assembly of achiral emissive molecules into circularly polarized luminescent supramolecular assemblies

Enantiomeric diaminocyclohexane was found to trigger the self-assembly of achiral monomers into chiral supramolecular assemblies with strong circularly polarized luminescence.