Chiral Redox-Active Isosceles Triangles

Selective Water Pore Recognition and Transport through Self-Assembled Alkyl-Ureido-Trianglamine Artificial Water Channels

In nature, aquaporins (AQPs) are proteins known for fast water transport through the membrane of living cells. Artificial water channels (AWCs) synthetic counterparts with intrinsic water permeability have been developed with the hope of mimicking the performances and the natural functions of AQPs. Highly selective AWCs are needed, and the design of selectivity filters for water is of tremendous importance. Herein, we report the use of self-assembled trianglamine macrocycles acting as AWCs in lipid bilayer membranes that are able to transport water with steric restriction along biomimetic H-bonding-decorated pores conferring selective binding filters for water. Trianglamine [(±)Δ, (mixture of diastereoisomers) and (R,R)3Δ and (S,S)3Δ], trianglamine hydrochloride (Δ.HCl), and alkyl-ureido trianglamines (n = 4, 6, 8, and 12) [(±)ΔC4, (±)ΔC8, (±)ΔC6, and (±)ΔC12] were synthesized for the studies presented here. The single-crystal X-ray structures confirmed that trianglamines form a tubular superstructure in the solid state. The water translocation is controlled via successive selective H-bonding pores (a diameter of 3 Å) and highly permeable hydrophobic vestibules (a diameter of 5 Å). The self-assembled alkyl-ureido-trianglamines achieve a single-channel permeability of 108 water molecules/second/channel, which is within 1 order of magnitude lower than AQPs with good ability to sterically reject ions and preventing the proton transport. Trianglamines present potential for engineering membranes for water purification and separation technologies.

A one-dimensional cobalt-based coordination polymer as a cathode material of lithium-ion batteries

For obtaining high-performance lithium-ion batteries, it is important to develop new cathode materials with high capacity. Herein, a one-dimensional coordination polymer [Co(4-DTBPT) (DMF)₂(H₂O)₂] (4-DTBPT) (C₁₀H₄O₈) (Co-DTBPT) (4-DTBPT = 2,7-di(4H-1,2,4-triazol-4yl)benzo[lmn][3,8] phenanthroline-1,3,6,8-(2H,7H)-tetraone; DMF = dimethylformamide) was synthesized and its electrochemical performance as the cathode material of lithium-ion batteries was first investigated. The Co-DTBPT electrode showed better cycling stability and a specific capacity of 55 mA h g^-1 at 50 mA g^-1 after 50 cycles, and the coulombic efficiency was close to 100%. The capacity contribution of the Co-DTBPT electrode may be ascribed to the redox reaction of the Co(II) ion and the 4-DTBPT ligand in the process of charge and discharge. Our work proves once again that using one-dimensional coordination polymers as cathode materials for lithium-ion batteries is a feasible way.

Rational Construction of Yolk-Shell Bimetal-Modified Quinonyl-Rich Covalent Organic Polymers with Ultralong Lithium-Storage Mechanism

Covalent organic polymers are attracting more and more attention for energy storage devices due to their lightweight, molecular viable design, stable structure, and environmental benignity. However, low charge-carrier mobility of pristine covalent organic materials is the main drawback for their application in lithium-ion batteries. Herein, a yolk-shell bimetal-modified quinonyl-rich covalent organic material, Co@2AQ-MnO₂, has been designed and synthesized by in situ loading of petal-like nanosized MnO₂ and coordinating with Co centers, with the aim to improve the charge conductivity of the covalent organic polymer and activate its Li-storage sites. As investigated by in situ FT-IR, ex situ XPS, and electrochemical probing, the quinonyl-rich structure provides abundant redox sites (carbonyl groups and π electrons from the benzene ring) for lithium reaction, and the introduction of two types of metallic species promotes the charge transfer and facilitates more efficient usage of active energy-storage sites in Co@2AQ-MnO₂. Thus, the Co@2AQ-MnO₂ electrode exhibits good cycling performance with large reversible capacity and excellent rate performance (1534.4 mA h g^-1 after 200 cycles at 100 mA g^-1 and 596.0 mA h g^-1 after 1000 cycles at 1000 mA g^-1).

Assembling of Perylene, Naphthalene, and Pyromellitic Diimide-Based Materials and Their Third-Order Nonlinear Optical Properties

π-conjugated aromatic diimides with chemical stability, heat resistance, and redox activity have attracted more attention due to their excellent fluorescence quantum yield in solution. The planar perylene diimide (PDI) derivatives generally have aggregation-induced emission quenching in the solid state, while the cyclic trimers based on pyromellitic diimides (PMDIs), naphthalene diimides (NDIs), and PDIs can increase the fluorescence quantum yield in the solid state and have large two-photon absorption cross section, which can be used as excellent nonlinear optical (NLO) materials. Therefore, this paper will study the effects of multiple assembly modes of the three monomers on the NLO responses of materials. It was found that the assembly modes of 2PMDI-1NDI and 2NDI-1PDI exhibit larger third-order NLO response (γ) values, which was due to the larger conjugate surface of PDI effectively reducing the energy gap between the HOMO and LUMO. Compared with other assembly methods, 2PMDI-1NDI and 2NDI-1PDI were conducive to causing redshifts (150 nm) in the absorption spectrum. Therefore, the larger conjugate surface of PDI and the assembly mode of the isosceles triangle were more favorable for intramolecular charge transfer, thus improving its NLO properties.

Structure analysis of inclusion crystals of diimide-based macrocycles with halocarbons

Inclusion crystals containing several halocarbons were formed by three types of diimide-based macrocycles. Iodomethane was encapsulated within the cavity of the macrocycle through halogen-related interactions.

Macrocyclic host molecules with aromatic building blocks: the state of the art and progress

Macrocyclic host molecules play the central role in host-guest chemistry and supramolecular chemistry. The highly structural symmetry of macrocyclic host molecules can meet people's pursuit of aesthetics in molecular design, and generally means a balance of design, synthesis, properties and applications. For macrocyclic host molecules with highly symmetrical structures, building blocks, which could be described as repeat units as well, are the most fundamental elements for molecular design. The structural features and recognition ability of macrocyclic host molecules are determined by the building blocks and their connection patterns. Using different building blocks, different macrocyclic host molecules could be designed and synthesized. With decades of developments of host-guest chemistry and supramolecular chemistry, diverse macrocyclic host molecules with different building blocks have been designed and synthesized. Aromatic building blocks are a big family among the various building blocks used in constructing macrocyclic host molecules. In this feature article, the recent developments of macrocyclic host molecules with aromatic building blocks were summarized and discussed.

Molecular Tailoring of an n/p-type Phenothiazine Organic Scaffold for Zinc Batteries

The p-type or n-type redox reactions of organics are being used as the reversible electrodes to build the next-generation rechargeable batteries with sustainable and tunable characteristics. However, the n-type organics that store cations generally exhibit low potential (<0.8 V vs. Zn/Zn²⁺ ), while the p-type organics that store anions suffer from limited capacity (<100 mAh g^-1 ). Herein, we demonstrate that bis(phenylamino)phenothiazin-5-ium iodide (PTD-1) containing both n-type and p-type redox moieties exhibits a hybrid charge storage mechanism (n/p-type at low potential, p-type at high potential). Such a hybrid mechanism combines the advantages of n- and p-type reactions and compensates for the associated drawbacks of each. Accordingly, the aqueous Zn//PTD-1 full cell shows a high voltage (1.8 V_maximum or 1.1 V_average ), a high capacity 188.24 mAh g_PTD-1 ^-1 (achieved at 40 mA g^-1 ), a long-life and a supercapacitor-like high power. These results shed new light on the design of advanced organic electrodes.

Naphthalene diimides: perspectives and promise

In this review, we describe the developments in the field of naphthalene diimides (NDIs) from 2016 to the presentday. NDIs are shown to be an increasingly interesting class of molecules due to their electronic properties, large electron deficient aromatic cores and tendency to self-assemble into functional structures. Almost all NDIs possess high electron affinity, good charge carrier mobility, and excellent thermal and oxidative stability, making them promising candidates for applications in organic electronics, photovoltaic devices, and flexible displays. NDIs have also been extensively studied due to their potential real-world uses across a wide variety of applications including supramolecular chemistry, sensing, host-guest complexes for molecular switching devices, such as catenanes and rotaxanes, ion-channels, catalysis, and medicine and as non-fullerene accepters in solar cells. In recent years, NDI research with respect to supramolecular assemblies and mechanoluminescent properties has also gained considerable traction. Thus, this review will assist a wide range of readers and researchers including chemists, physicists, biologists, medicinal chemists and materials scientists in understanding the scope for development and applicability of NDI dyes in their respective fields through a discussion of the main properties of NDI derivatives and of the status of emerging applications.

Multifunctional Additives for High-Energy-Density Lithium-Ion Batteries: Improved Conductive Additive/Binder Networks and Enhanced Electrochemical Properties

Cylindrical-type cells have been widely adopted by major battery and electric vehicle manufacturers owing to their price competitiveness, safety, and easy expandability. However, placement of electrodes at the core of cylindrical cells is currently restricted because of high electrode curvature and the lack of specialized electrodes and electrode materials. Here, we report the realization of highly flexible high-energy-density electrodes (active material loading of >98.4%) that can be used at the cores of cylindrical cells. The improved properties result from the introduction of a multifunctional poly(melamine-co-formaldehyde) (MF copolymer) additive, which yields a relatively more fluidic and well-dispersed slurry using only 0.08 wt %. MF copolymer-mediated formation of completely wrapped CNT/PVDF networks on LiCoO₂ (LCO) and accompanying contact enhancement between LCO and carbon nanotubes (CNTs) resulted in an increase of electrical and mechanical properties of the two types (composites with or without collectors) of electrodes compared with those of additive-free electrodes. Flexibility tests were carried out by rolling electrodes onto cylinder substrates (diameters of ca. 1 and 10 mm); this process resulted in relatively lower resistance changes of the MF copolymer-containing electrodes than for the reference electrodes. In addition, capacity retention after 100 cycles for cells with and without MF copolymers was approximately 10-20% better for the samples with the MF copolymer than for those without. CNT/PVDF networks with MF copolymers were proven to induce a relatively thin and stable cathode electrolyte interface layer accompanying the chemical bond formation during cycling.

Molecular Triangles: A New Class of Macrocycles

ConspectusMacrocycles have had a profound influence on the establishment of supramolecular chemistry because of their abundant molecular recognition and self-assembly characteristics. The design of new macrocyclic receptors that can be tailored by synthesis to display new and exotic properties is an important research objective for chemists and materials scientists. Rigid macrocycles with π-conjugated aromatic units, in contrast with flexible ones, tend to possess large interior and exterior π-surfaces in addition to persistent shapes. These features not only endow these macrocycles with a wide range of host-guest properties but also render them ideal building blocks for constructing a diverse variety of supramolecular architectures. The incorporation of π-conjugated units into macrocycles also imbues them with a wealth of optical, electronic, and magnetic properties, resulting in their broad application in materials science and molecular nanotechnology.Recently, we have designed and synthesized a new class of macrocycles, namely, molecular triangles, which have rigid structures with triangular geometries. They consist of three chiral trans-1,2-cyclohexano apexes and three aromatic tetracarboxylic diimide linkers, such as pyromellitic diimide, naphthalene diimide, and perylene diimide. Benefiting from the availability of facile synthetic protocols, the geometries and properties of these rigid molecular triangles can be altered at will. By combining these tetracarboxylic diimide linkers, we have been able to synthesize both molecular equilateral and isosceles triangles. During the past few years, we have conducted research in a systematic manner on the structural features and self-assembly characteristics of these molecular triangles. The following points are worthy of note regarding these molecular triangles: (i) They possess shape-persistent inner cavities of a highly electron-deficient nature. These features endow them with the ability to complex with anions and electron-rich molecules, forming supramolecular nanotubes and two-dimensional tilings. (ii) Those with intrinsic chirality are able to self-assemble into solid-state nonhelical or single-handed helical superstructures, inducing selective chirality transfer from the macrocycles to their crystalline supramolecular assemblies. (iii) The triangular arrangement of aromatic tetracarboxylic diimide linkers contributes to through-space electron delocalization encompassing the entire macrocycle, conferring exotic electronic and spin properties. To date, the family of molecular triangles has exhibited a range of physicochemical properties, such as anion recognition, chiral assembly, supramolecular gelation, energy storage, solid-state luminescence, and nonlinear optical response.In this Account, we summarize our recent progress in research into these molecular triangles. We present an overview of their design and synthesis, as well as a general summary of their structural features. Thereafter, we discuss state-of-the-art developments in relation to their molecular recognition properties and their assembly characteristics. In addition, we highlight the potential applications of these molecular triangles and their complexes with a range of solvents and electron-rich molecules. Finally, we speculate on further structural modifications and application-oriented explorations based on this class of molecular triangles.

Molecular Engineering of Aromatic Imides for Organic Secondary Batteries

Aromatic imides are a class of attractive organic materials with inherently electroactive groups and large π electron-deficient scaffolds, which hold potential as electrode materials for organic secondary batteries (OSBs). However, the undecorated aromatic imides are usually plagued by low capacity, high solubility in electrolyte, and poor electronic/ionic conductivity. Molecular engineering has been demonstrated to be an effective strategy to address unsatisfying characteristics of the aromatic imides, thereby expanding their scope for applications in OSBs. In this review, the recent research progress in modulation of the capacity, dissolution, and electronic/ionic conductivity of aromatic imides for organic lithium batteries, organic sodium batteries, and redox flow batteries are summarized. In addition, the challenge and prospective of aromatic imides in organic secondary battery applications are also discussed.

3D supramolecular chiral crystal structures of radical anion salts of (−)-NDI-Δ and possible magnetic phase diagrams

Supramolecular chiral crystals of radical anion salts of a triangular chiral electron acceptor, (−)-naphthalene diimide (NDI)-Δ, were electrochemically grown in propylene carbonate electrolyte solutions in the presence of cyclic multidentate ligands.

A novel π-conjugated poly(biphenyl diimide) with full utilization of carbonyls as a highly stable organic electrode for Li-ion batteries

Organic carbonyl redox polymers, especially conjugated polyimides with multiple reversible redox centers have attracted considerable attention as electrode materials for organic Li-ion batteries. However, the low utilization of carbonyls hindered their potential applications in energy storage. Herein, a novel π-conjugated polyimide (PBPI) based on biphenyl diimide (BPI) containing two seven-membered imide rings is developed. PBPI is used as an anode material for organic Li-ion batteries, which show high conductivity and insolubility in the electrolyte and enable intercalation of four Li-ions per BPI unit, thus contributing to a reversible capacity of 136 mA h g⁻¹ at 100 mA g⁻¹ with coulombic efficiency close to 100%. Moreover, the battery based on PBPI manifested superior high-rate performance (65 mA h g⁻¹ at 2000 mA g⁻¹) as well as significant cycling stability (over 1600 cycles at 100 mA g⁻¹). Remarkably, the full redox-active site (C Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> O) utilization of an aromatic diimide core to achieve its full potential applications is reported for the first time. This work provides a new strategy for developing redox π-conjugated polyimides and accommodation of more alkaline ions for high performance battery systems.

A novel π-conjugated polyimide based on the two seven-membered imide rings-containing BPI was reported, which be used as a highly stable anode electrode material with full utilization of carbonyls for the application organic Li-ion batteries.

In Situ Coating Graphdiyne for High-Energy-Density and Stable Organic Cathodes

The preparation of organic small-molecule cathodes is simple and low-cost; however, their low conductivity and molecular dissolution are two key issues that mean their energy density and power performance are far lower than those of inorganic batteries, thus hindering their practical application. To develop an effective coating technology is the key to obtain high-performance organic batteries. A general method of in situ weaving all-carbon graphdiyne nanocoatings is demonstrated. The graphdiyne can be conformally weaved on organic particles under mild conditions so that the conductivity is increased and the dissolution is suppressed. After weaving graphdiyne nanocoat, the active mass of the small-molecule organic cathodes rise to 93%, thus delivering a higher energy density of 310 W h kg^-1 than previously reported, and the power performance and long-term stability are greatly improved. Additionally, this method shows great potential to become the crucial technology for fabricating organic batteries with energy density close to prevailing lithium-ion batteries.

Charge transfer co-crystals based on donor–acceptor interactions for near-infrared photothermal conversion

The charge transfer from the donor to the acceptor units results in a CT complex with excellent near-infrared photothermal conversion efficiency, which acted as an excellent photothermal material in seawater desalination application.

What is the driving force behind molecular triangles and their guests? A quantum chemical perspective about host–guest interactions

The physical nature of host–guest interactions occurring between molecular triangles and linear anions was explored using DFT calculations combined with energy decomposition analyses, nuclear independent chemical shift, and non-covalent interactions.

The usefulness of energy decomposition schemes to rationalize host–guest interactions

The findings reported here reveal the robustness and practical application of EDA-NOCV in rationalizing molecular recognition situations in host–guest systems.

Persistent radical anions in the series of peri-arylenes: broadband light absorption until far in the NIR and purely organic magnetism

Abstract

Stable radicals in organic conjugated molecules are of great interest due to their magnetic signals and broad optical absorptions. In this paper, we report on naphthalene, benzoperylene, perylene, terrylene, and quaterrylene carboximides, reduced under controlled conditions, where stable metal-free solid salts of radical anions could be obtained forming darkly colored solutions with line-rich UV/Vis/NIR spectra and exhibiting special magnetic properties. The most bathochromic shift of the absorption maxima extend from 760 until 1700 nm. Persistent paramagnetic properties of the solids were observed and temperature-dependent susceptibilities are measured.

Graphical abstract

Few layer covalent organic frameworks with graphene sheets as cathode materials for lithium-ion batteries

Covalent organic frameworks (COFs) have attracted increasing interest for their use as electrode materials for lithium-ion batteries (LIBs) by virtue of their microporous crystalline structures and robust networks. However, the tightly stacked bulk COFs and their intrinsic low conductivity inevitably result in an inefficient utilization of redox-active sites so as to lower the electrochemical performance. Herein, we proposed a general strategy to improve the energy storage capability of polyimide (PI)-COF based cathode materials, which included the decrease of their stacked layer numbers to a few layers via a mechanical milling method for the efficient utilization of redox-active sites and the incorporation of few-layer COF sheets with chemically reduced graphene oxide (rGO) to increase the charge transfer. The excellent electrochemical performance of the composite few-layer PI-COFs with rGO cathodes indicated that reducing the layer number of COFs and incorporating rGO may pave the way for the successful development of COF-based organic electrodes for LIBs.

Triangular Regulation of Cucurbit[8]uril 1:1 Complexes

Triangular shapes have inspired scientists over time and are common in nature, such as the flower petals of oxalis triangularis, the triangular faces of tetrahedrite crystals, and the icosahedron faces of virus capsids. Supramolecular chemistry has enabled the construction of triangular assemblies, many of which possess functional features. Among these structures, cucurbiturils have been used to build supramolecular triangles, and we recently reported paramagnetic cucurbit[8]uril (CB[8]) triangles, but the reasons for their formation remain unclear. Several parameters have now been identified to explain their formation. At first sight, the radical nature of the guest was of prime importance in obtaining the triangles, and we focused on extending this concept to biradicals to get supramolecular hexaradicals. Two sodium ions were systematically observed by ESI-MS in trimer structures, and the presence of Na⁺ triggered or strengthened the triangulation of CB[8]/guest 1:1 complexes in solution. X-ray crystallography and molecular modeling have allowed the proposal of two plausible sites of residence for the two sodium cations. We then found that a diamagnetic guest with an H-bond acceptor function is equally good at forming CB[8] triangles. Hence, a guest molecule containing a ketone function has been precisely triangulated thanks to CB[8] and sodium cations as determined by DOSY-NMR and DLS. A binding constant for the triangulation of 1:1 to 3:3 complexes is proposed. This concept has finally been extended to the triangulation of ditopic guests toward network formation by the reticulation of CB[8] triangles using dinitroxide biradicals.

Discrete Dimers of Redox-Active and Fluorescent Perylene Diimide-Based Rigid Isosceles Triangles in the Solid State

The development of rigid covalent chiroptical organic materials, with multiple, readily available redox states, which exhibit high photoluminescence, is of particular importance in relation to both organic electronics and photonics. The chemically stable, thermally robust, and redox-active perylene diimide (PDI) fluorophores have received ever-increasing attention owing to their excellent fluorescence quantum yields in solution. Planar PDI derivatives, however, generally suffer from aggregation-caused emission quenching in the solid state. Herein, we report on the design and synthesis of two chiral isosceles triangles, wherein one PDI fluorophore and two pyromellitic diimide (PMDI) or naphthalene diimide (NDI) units are arranged in a rigid cyclic triangular geometry. The optical, electronic, and magnetic properties of the rigid isosceles triangles are fully characterized by a combination of optical spectroscopies, X-ray diffraction (XRD), cyclic voltammetry, and computational modeling techniques. Single-crystal XRD analysis shows that both isosceles triangles form discrete, nearly cofacial PDI-PDI π-dimers in the solid state. While the triangles exhibit fluorescence quantum yields of almost unity in solution, the dimers in the solid state exhibit very weak-yet at least an order of magnitude higher-excimer fluorescence yield in comparison with the almost completely quenched fluorescence of a reference PDI. The triangle containing both NDI and PDI subunits shows superior intramolecular energy transfer from the lowest excited singlet state of the NDI to that of the PDI subunit. Cyclic voltammetry suggests that both isosceles triangles exhibit multiple, easily accessible, and reversible redox states. Applications beckon in arenas related to molecular optoelectronic devices.

Anion–π interactions in lithium–organic redox flow batteries

The interactions between the electrolyte anions and electron-deficient redox-active organic molecules (anion–π interactions) have strong influences on the battery properties due to the anion–π-induced formation of radical anions or sandwich-like aggregates.

Coordination Polymers for High-Capacity Li-Ion Batteries: Metal-Dependent Solid-State Reversibility

Electrode materials exploiting multielectron-transfer processes are essential components for large-scale energy storage systems. Organic-based electrode materials undergoing distinct molecular redox transformations can intrinsically circumvent the structural instability issue of conventional inorganic-based host materials associated with lattice volume expansion and pulverization. Yet, the fundamental mechanistic understanding of metal-organic coordination polymers toward the reversible electrochemical processes is still lacking. Herein, we demonstrate that metal-dependent spatial proximity and binding affinity play a critical role in the reversible redox processes, as verified by combined ¹³C solid-state NMR, X-ray absorption spectroscopy, and transmission electron microscopy. During the electrochemical lithiation, in situ generated metallic nanoparticles dispersed in the organic matrix generate electrically conductive paths, synergistically aiding subsequent multielectron transfer to π-conjugated ligands. Comprehensive screening on 3d-metal-organic coordination polymers leads to a high-capacity electrode material, cobalt-2,5-thiophenedicarboxylate, which delivers a stable specific capacity of ∼1100 mA h g^-1 after 100 cycles.

Electron-poor arylenediimides

This review article highlights the emergence of eclectic molecular design principles to realize remarkably strong electron deficient arylenediimide molecules, aspects of their stability and associated applications.

X-Shaped Oligomeric Pyromellitimide Polyradicals

The synthesis of stable organic polyradicals is important for the development of magnetic materials. Herein we report the synthesis, isolation, and characterization of a series of X-shaped pyromellitimide (PI) oligomers (X_n-R, n = 2-4, R = Hex or Ph) linked together by single C-C bonds between their benzenoid cores. We hypothesize that these oligomers might form high-spin states in their reduced forms because of the nearly orthogonal conformations adopted by their PI units. ¹H and ¹³C nuclear magnetic resonance (NMR) spectroscopies confirmed the isolation of the dimeric, trimeric, and tetrameric homologues. X-ray crystallography shows that X₂-Ph crystallizes into a densely packed superstructure, despite the criss-crossed conformations adopted by the molecules. Electrochemical experiments, carried out on the oligomers X_n-Hex, reveal that the reductions of the PI units occur at multiple distinct potentials, highlighting the weak electronic coupling between the adjacent redox centers. Finally, the chemically generated radical anion and polyanion states, X_n-Hex^•- and X_n-Hex^n(•-), respectively, were probed extensively by UV-vis-NIR absorption, EPR, and electron nuclear double resonance (ENDOR) spectroscopies. The ENDOR spectra of the radical monoanions X_n-Hex^•- reveal that the unpaired electron is largely localized on a single PI unit. Further reductions of X_n-Hex^•- yield EPR signals (in frozen solutions) that can be assigned to spin-spin interactions in X₂-Hex^2(•-), X₃-Hex^3(•-), and X₄-Hex^4(•-). Taken together, these findings demonstrate that directly linking the benzene rings of PIs with a single C-C bond is a viable method for generating stabilized high-spin organic anionic polyradicals.

Redox-sensitive reversible self-assembly of amino acid-naphthalene diimide conjugates

Peptide and low molecular weight amino acid-based materials that self-assemble in response to environmental triggers are highly desirable candidates in forming functional materials with tunable biophysical properties. In this paper, we explore redox-sensitive self-assembly of cationic phenylalanine derivatives conjugated to naphthalene diimide (NDI). Self-assembly of the cationic Phe-NDI conjugates into nanofibrils was induced in aqueous solvent at high ionic strength. Under reducing conditions, these self-assembled Phe-NDI conjugate fibrils underwent a morphological change to non-fibril aggregates. Upon reoxidation, the initially observed fibrils were reformed. The study herein provides an interesting strategy to effect reversible switching of the structure of supramolecular materials that can be applied to the development of sophisticated stimulus-responsive materials.

Molecular Engineering with Organic Carbonyl Electrode Materials for Advanced Stationary and Redox Flow Rechargeable Batteries

Organic carbonyl electrode materials that have the advantages of high capacity, low cost and being environmentally friendly, are regarded as powerful candidates for next-generation stationary and redox flow rechargeable batteries (RFBs). However, low carbonyl utilization, poor electronic conductivity and undesired dissolution in electrolyte are urgent issues to be solved. Here, we summarize a molecular engineering approach for tuning the capacity, working potential, concentration of active species, kinetics, and stability of stationary and redox flow batteries, which well resolves the problems of organic carbonyl electrode materials. As an example, in stationary batteries, 9,10-anthraquinone (AQ) with two carbonyls delivers a capacity of 257 mAh g^-1 (2.27 V vs Li⁺ /Li), while increasing the number of carbonyls to four with the formation of 5,7,12,14-pentacenetetrone results in a higher capacity of 317 mAh g^-1 (2.60 V vs Li⁺ /Li). In RFBs, AQ, which is less soluble in aqueous electrolyte, reaches 1 M by grafting -SO₃ H with the formation of 9,10-anthraquinone-2,7-disulphonic acid, resulting in a power density exceeding 0.6 W cm^-2 with long cycling life. Therefore, through regulating substituent groups, conjugated structures, Coulomb interactions, and the molecular weight, the electrochemical performance of carbonyl electrode materials can be rationally optimized. This review offers fundamental principles and insight into designing advanced carbonyl materials for the electrodes of next-generation rechargeable batteries.

Crystal structure of 2,6-di-benzyl-pyrrolo-[3,4-f]iso-indole-1,3,5,7(2H,6H)-tetra-thione

The title compound, C24H16N2S4, consists of a central pyromellitic di-imide substituted with an S atom and terminal benzyl groups. The mol-ecule lies on a crystallographic inversion centre so that the asymmetric unit contains half of the mol-ecule. The mol-ecule was prepared by thio-nation of N,N'-di-benzyl-pyromellitic di-imide with Lawesson's reagent and has an S-shaped conformation similar to other compounds of this type. The phenyl groups are tilted by 72.69 (8)° with respect to the plane of the central arene ring. In the crystal, mol-ecules are connected by C-H⋯π inter-actions and weak short S⋯S contacts, forming supra-molecular layers extending paralled to the ab plane. The crystal studied was found to be non-merohedrally twinned, with the minor component being 0.113 (3).

Surveying macrocyclic chemistry: from flexible crown ethers to rigid cyclophanes

This review features the progress made in the development of macrocycles since Pedersen's ground-breaking discovery of the crown ethers in 1967.

The first water-soluble pillar[5]arene dimer: synthesis and construction of a reversible fluorescent supramolecular polymer network in water

The first water-soluble pillar[5]arene dimer was successfully designed and synthesized. It can complex with carboxylate anion functionalized tetraphenyl ethylene to form a reversible fluorescent supramolecular polymer network in water.

Supramolecular Double-Helix Formation by Diastereoisomeric Conformations of Configurationally Enantiomeric Macrocycles

Solid-state superstructures, resulting from assemblies programmed by homochirality, are attracting considerable attention. In addition, artificial double-helical architectures are being investigated, especially in relation to the ways in which homochiral small molecules can be induced to yield helical forms as a result of chiral induction. Herein, we report the highly specific self-assembly upon crystallization of a double-helical superstructure from an enantiopure macrocyclic dimer which adopts two diastereoisomeric conformations in a molar ratio of 1.5:1 in dimethyl sulfoxide. These two conformational diastereoisomers self-organize-and self-sort-in the crystalline phase in equimolar proportions to form two single-handed helices which are complementary to each other, giving rise to the assembly of a double helix that is stabilized by intermolecular [C-H···O] and π-π stacking interactions. The observed self-sorting phenomenon occurs on going from a mixed-solvent system containing two equilibrating conformational diastereoisomers, presumably present in unequal molar proportions, into the solid state. The diastereoisomeric conformations are captured upon crystallization in a 1:1 molar ratio in the double-helical superstructure, whose handedness is dictated by the choice of the enantiomeric macrocyclic dimer. The interconversion of the two conformational diastereoisomers derived from each configurationally enantiomeric macrocycle was investigated in CD₃SOCD₃ solution by variable-temperature ¹H NMR spectroscopy (VT NMR) and circular dichroism (VT CD). The merging of the resonances for the protons corresponding to the two diastereoisomers at a range of coalescence temperatures in the VT NMR spectra and occurrence of the isosbestic points in the VT CD spectra indicate that the two diastereoisomers are interconverting slowly in solution on the ¹H NMR time scale but rapidly on the laboratory time scale. To the best of our knowledge, the self-assembly of such solid-state superstructures from two conformational diastereoisomers of a homochiral macrocycle is a rare, if not unique, occurrence.