Metalation Triggers Single Crystalline Order in a Porous Solid

Cysteamine-Anchored MOF through Post-Synthetic Modification Strategy for the Effective Removal of Mercury from Water

The introduction of cysteamine functionality, referred to as Q-ZIF-67-SH, was successfully achieved through postsynthetic modification while maintaining the structural and thermal stability of the quasi metal-organic framework Q-ZIF-67. By subjecting ZIF-67 to controlled partial deligandation at 310 °C under an air atmosphere, a substantial number of unsaturated cobalt sites were generated within the quasi ZIF-67 (Q-ZIF-67) structure. These unsaturated cobalt sites facilitated effective coordination with cysteamine, resulting in the development of the thiol-functionalized framework Q-ZIF-67-SH. The potential of these metal-organic frameworks (MOFs) for the adsorptive removal of hazardous Hg(II) was investigated. Various factors, such as the type of sorbent, pH, adsorbent dosage, initial concentration of Hg(II), and presence of coexisting ions, were thoroughly examined and comprehensively explained. Thiol-anchored MOF significantly enhanced the efficiency of Hg(II) removal, achieving an impressive removal rate of up to 99.2%. Furthermore, it demonstrated a maximum adsorption capacity of 994 mg g-1 and a distribution coefficient of 2.5 × 106 mL g-1. A good correspondence with pseudo-second-order kinetics and the Langmuir model was observed through the fitting of adsorption kinetics and the isotherm model. The thermodynamic data strongly indicate that the adsorptive removal of Hg(II) is characterized by endothermicity and spontaneity. This signifies that the process is energetically favorable and has potential for efficient Hg(II) removal. Therefore, the Q-ZIF-67-SH sorbent emerges as a promising and advantageous option for the removal of Hg(II) from water.

Thiol and thioether-based metal-organic frameworks: synthesis, structure, and multifaceted applications

Metal-organic frameworks (MOFs) are unique hybrid porous materials formed by combining metal ions or clusters with organic ligands. Thiol and thioether-based MOFs belong to a specific category of MOFs where one or many thiols or thioether groups are present in organic linkers. Depending on the linkers, thiol-thioether MOFs can be divided into three categories: (i) MOFs where both thiol or thioether groups are part of the carboxylic acid ligands, (ii) MOFs where only thiol or thioether groups are present in the organic linker, and (iii) MOFs where both thiol or thioether groups are part of azolate-containing linkers. MOFs containing thiol-thioether-based acid ligands are synthesized through two primary approaches; one is by utilizing thiol and thioether-based carboxylic acid ligands where the bonding pattern of ligands with metal ions plays a vital role in MOF formation (HSAB principle). MOFs synthesized by this approach can be structurally differentiated into two categories: structures without common structural motifs and structures with common structural motifs (related to UiO-66, UiO-67, UiO-68, MIL-53, NU-1100, etc.). The second approach to synthesize thiol and thioether-based MOFs is indirect methods, where thiol or thioether functionality is introduced in MOFs by techniques like post-synthetic modifications (PSM), post-synthetic exchange (PSE) and by forming composite materials. Generally, MOFs containing only thiol-thioether-based ligands are synthesized by interfacial assisted synthesis, forming two-dimensional sheet frameworks, and show significantly high conductivity. A limited study has been done on MOFs containing thiol-thioether-based azolate ligands where both nitrogen- and sulfur-containing functionality are present in the MOF frameworks. These materials exhibit intriguing properties stemming from the interplay between metal centres, organic ligands, and sulfur functionality. As a result, they offer great potential for multifaceted applications, ranging from catalysis, sensing, and conductivity, to adsorption. This perspective is organised through an introduction, schematic representations, and tabular data of the reported thiol and thioether MOFs and concluded with future directions.

Superselective Hg(II) Removal from Water Using a Thiol-Laced MOF-Based Sponge Monolith: Performance and Mechanism

Point-of-use (POU) devices with satisfying mercury (Hg) removal performance are urgently needed for public health and yet are scarcely reported. In this study, a thiol-laced metal-organic framework (MOF)-based sponge monolith (TLMSM) has been investigated for Hg(II) removal as the POU device for its benchmark application. The resulting TLMSM was characterized by remarkable chemical resistance, mechanical stability, and hydroscopicity (>2100 wt %). Importantly, the TLMSM has exhibited high adsorption capacity (∼954.7 mg g^-1), fast kinetics (k_f ∼ 1.76 × 10^-5 ms^-1), broad working pH range (1-10), high selectivity (K_d > 5.0 × 10⁷ mL g^-1), and excellent regeneration capability (removal efficiency >90% after 25 cycles). The high applicability of TLMSM in real-world scenarios was verified by its excellent Hg(II) removal performance in various real water matrices (e.g., surface waters and industrial effluents). Moreover, a fixed-bed column test demonstrated that ∼1485 bed volumes of the feeding streams (∼500 μg L^-1) can be effectively treated with an enrichment factor of 12.6, suggesting the great potential of TLMSM as POU devices. Furthermore, the principal adsorption complexes (e.g., single-layer -S-Hg-Cl and double-layer -S-Hg-O-Hg-Cl and -S-Hg-O-Hg-OH) formed during the adsorption process under a wide range of pH were synergistically and systematically unveiled using advanced tools. Overall, this work presents an applicable approach by tailoring MOF into a sponge substrate to achieve its real application in heavy metal removal from water, especially for Hg(II).

A Third Generation Potentially Bifunctional Trithiol Chelate, Its nat,1XXSb(III) Complex, and Selective Chelation of Radioantimony (119Sb) from Its Sn Target

The therapeutic potential of the Meitner-Auger- and conversion-electron emitting radionuclide ¹¹⁹Sb remains unexplored because of the difficulty of incorporating it into biologically targeted compounds. To address this challenge, we report the development of ¹¹⁹Sb production from electroplated tin cyclotron targets and its complexation by a novel trithiol chelate. The chelation reaction occurs in harsh solvent conditions even in the presence of large quantities of tin, which are necessary for production on small, low energy (16 MeV) cyclotrons. The ¹¹⁹Sb-trithiol complex has high stability and can be purified by HPLC. The third generation trithiol chelate and the analogous stable ^natSb-trithiol compound were synthesized and characterized, including by single-crystal X-ray diffraction analyses.

A New, Second Generation Trithiol Bifunctional Chelate for 72,77As: Trithiol(b)-(Ser)2-RM2

Trithiol chelates are suitable for labeling radioarsenic (72As: 2.49 MeV β+, 26 h; 77As: 0.683 MeV β-, 38.8 h) to form potential theranostic radiopharmaceuticals for positron emission tomography (PET) imaging and therapy. A trithiol(b)-(Ser)2-RM2 bioconjugate and its arsenic complex were synthesized and characterized. The trithiol(b)-(Ser)2-RM2 bioconjugate was radiolabeled with no-carrier-added 77As in over 95% radiochemical yield and was stable for over 48 h, and in vitro IC50 cell binding studies of [77As]As-trithiol(b)-(Ser)2-RM2 in PC-3 cells demonstrated high affinity for the gastrin-releasing peptide (GRP) receptor (low nanomolar range). Limited biodistribution studies in normal mice were performed with HPLC purified 77As-trithiol(b)-(Ser)2-RM2 demonstrating both pancreatic uptake and hepatobiliary clearance.

Invisible Silver Guests Boost Order in a Framework That Cyclizes and Deposits Ag3Sb Nanodots

The infusion of metal guests into (i.e., metalating) the porous medium of metal-organic frameworks (MOFs) is a topical approach to wide-ranging functionalization purposes. We report the notable interactions of AgSbF₆ guests with the designer MOF host ZrL1 [Zr₆O₄(OH)₇(L1)_4.5(H₂O)₄]. (1) The heavy-atom guests of AgSbF₆ induce order in the MOF host to allow the movable alkyne side arm to be fully located by X-ray diffraction, but they themselves curiously remain highly disordered and absent in the strucutral model. The enhanced order of the framework can be generally ascribed to interaction of the silver guests with the host alkyne and thioether functions, while the invisible heavy-atom guest represents a new phenomenon in the metalation of open framework materials. (2) The AgSbF₆ guests also participate in the thermocyclization of the vicinal alkyne units of the L1 linker (at 450 °C) and form the rare nanoparticle of Ag₃Sb supported on the concomitantly formed nanographene network. The resulted composite exhibits high electrical conductivity (1.0 S/cm) as well as useful, mitigated catalytic activity for selectively converting nitroarenes into the industrially important azo compounds, i.e., without overshooting to form the amine side products. The heterogeneous/cyclable catalysis entails only the cheap reducing reagents of NaBH₄, ethanol, and water, with yields being generally close to 90%.

Functionalized Metal-Organic Frameworks for Hg(II) and Cd(II) Capture: Progresses and Challenges

Mercury and cadmium are deemed to be the most harmful heavy metal ions for elimination due to their persistent bio-accumulative and bio-expanding toxic effects. Although many technologies have been developed for capturing Hg(II) and Cd(II) ions from aqueous solution, developing efficient and practical capature technology remains a big challenge. Metal-organic frameworks (MOFs) have been considered as the most promising adsorbents for Hg(II) and Cd(II) removal due to their high porosity and easy functionalization, and various of MOF-based adsorbents based on different synthetic strategies have been prepared and studied. In this article, the progresses of MOF-based absorbents for Hg(II) and Cd(II) capture are described according to the synthetic strategies and the types of functional groups, and the comparison and practical analysis of various adsorbents are also presented.

Thio-groups decorated covalent triazine frameworks for selective mercury removal

Covalent triazine frameworks (CTFs) as a kind of covalent organic framework (COF) materials show great potential for practical application by virtue of their high stability and facile large-scale synthesis. In this work, we developed three CTFs (MSCTF-1, MSCTF-2, and xSCTF-2) of different pore size decorated with S-groups using different functionalization methods for achieving selective Hg²⁺ removal from aqueous solutions. The material structures were comprehensively studied by gas adsorption, IR and XPS, etc. Among them, the MSCTF-2 with 24.45% S content showed the highest Hg²⁺ adsorption capacity of 840.5 mg g^‒1, while MSCTF-1 exhibiting much larger distribution coefficient of 1.67 × 10⁸ mL g^‒1 renders an exceptionally high efficiency for reducing the concentration of Hg²⁺ contaminated water to less than 0.03 μg L^‒1. Moreover, the MSCTFs show distinct features of: (i) high selectivity toward Hg²⁺ over various transition metal ions; (ii) high stability over a wide pH range from pH 1 to 12; and (iii) good recyclability with 94% of Hg²⁺ removal over five consecutive cycles. The Hg²⁺ adsorption on functionalized CTFs followed pseudo-second-order kinetics and Langmuir isotherm. Our results revealed the material structure-performance relationship that the adsorption capacities depend on the binding site density whereas the distribution coefficient is essential to the removal efficiency.

A Heterometallic Three-Dimensional Metal-Organic Framework Bearing an Unprecedented One-Dimensional Branched-Chain Secondary Building Unit

A heterometallic metal−organic framework (MOF) of [Cd₆Ca₄(BTB)₆(HCOO)₂(DEF)₂(H₂O)₁₂]∙DEF∙xSol (1, H₃BTB = benzene-1,3,5-tribenzoic acid; DEF = N,N′-diethylformamide; xSol. = undefined solvates within the pore) was prepared by solvothermal reaction of Cd(NO₃)₂·4H₂O, CaO and H₃BTB in a mixed solvent of DEF/H₂O/HNO₃. The compatibility of these two divalent cations from different blocks of the periodic table results in a solid-state structure consisting of an unusual combination of a discrete V-shaped heptanuclear cluster of [Cd₂Ca]₂Ca′ and an infinite one-dimensional (1D) chain of [Cd₂CaCa′]_n that are orthogonally linked via a corner-shared Ca²⁺ ion (denoted as Ca′), giving rise to an unprecedented branched-chain secondary building unit (SBU). These SBUs propagate via tridentate BTB to yield a three-dimensional (3D) structure featuring a corner-truncated P4₁ helix in MOF 1. This outcome highlights the unique topologies possible via the combination of carefully chosen s- and d-block metal ions with polydentate ligands.

Building Conjugated Donor-Acceptor Cross-Links into Metal-Organic Frameworks for Photo- and Electroactivity

We convert a coordination network into a covalent solid, while maintaining the crystallinity and greatly enhancing the framework rigidity and redox-active and photochemical properties. Specifically, intensely light-absorbing push-pull functions are postsynthetically installed by reacting the electrophilic TCNE (tetracyanoethylene) guests and the electron-rich alkyne side arms on a microporous Zr-organic framework, generating black microporous crystallites with a band gap smaller than 1.0 eV. The reaction proceeds in the known [2 + 2] cycloaddition-retroelectrocyclization mechanism and extensively establishes conjugated (polyene) bridges across the linker molecules. The donor (4-methoxyphenyl) and acceptor (dicyanovinyl) couples of the polyene bridges also act as an efficient fluorescent quencher and can be selectively installed in a thin outer layer of the host crystallite to form a core-shell assembly for turn-on fluorescent sensing of small amine molecules in water solutions.

High-Performance Metal-Organic Framework-Templated Sorbent for Selective Eu(III) Capture

A stable porous sorbent M1 was achieved through the specific transformation of flexible thioalkyl groups and metal cluster sites in a zirconium MOF (metal-organic framework; Zr-L) template. The target polymer combines sulfoxide/sulfone and phosphoric acid in a single framework, which was fully characterized by ¹H-NMR, PXRD, IR, and elemental analysis. When employed as the heavy metal adsorbent, M1 exhibit a remarkable Eu(III) sorption behavior, achieving both high chemical affinity (K _d = 10⁵) and sorption capacity (the maximum Eu(III) sorption capacity reached 220 mg g^-1 at pH = 4.0 and T = 298 K calculated from the Langmuir model). Recyclability and selectivity test of M1 further prove that the sorbent is highly stable and effective for europium enrichment in the aqueous solution. This work takes focus on the introduction of multifunctional groups into a single polymeric framework in a feasible and environmentally friendly way and highlights the sorption efficiency for europium removal from the aqueous solution.

Conjugated porous polymers: incredibly versatile materials with far-reaching applications

This review discusses conjugated porous polymers and focuses on relating design principles and synthetic methods to key properties and applications such as (photo)catalysis, gas storage, chemical sensing, energy storage and environmental remediation.

Janus triple tripods build up a microporous manifold for HgCl2 and I2 uptake

Three tripods for a versatile molecular scaffold: combining the Janus core for supramolecular recognition and the planar carboxyl tripod for framework construction enables metal uptake and iodine removal applications.

Dramatic improvement of stability by in situ linker cyclization of a metal–organic framework

Towards 3D graphenes: we demonstrate an effective two-step strategy for accessing crystalline porous covalent networks of highly conjugated π-electron systems.

A functionalized metal-organic framework decorated with O- groups showing excellent performance for lead(ii) removal from aqueous solution

A novel MOF decorated with O^– groups was elaborately constructed and showed excellent performance for Pb²⁺ removal.

Heavy metal ions are highly toxic and widely spread as environmental pollutants. New strategies are being developed to efficiently remove these toxic ions. Herein, we use the intrinsic advantages of metal–organic frameworks (MOFs) and develop a porous Zn(ii)-based MOF decorated with O^– groups for the removal of Pb²⁺. Benefiting from its multiple porosity, sufficient adsorption sites and strong affinity, the activated MOF material exhibits an ultrahigh Pb²⁺ uptake capacity (616.64 mg g^–1), surpassing all those of reported MOF adsorbents. Moreover, it can selectively capture Pb²⁺ with high efficiency (>99.27%) against background ions. Even in the presence of a high concentration of competitive ions, such as Ca²⁺ or Mg²⁺, effective removal (>99.21%) can also be achieved in a short time. The excellent removal performance demonstrates the strong electrostatic attraction and coordination interaction between the highly accessible O^– groups and Pb²⁺. The possible adsorption mechanism was systematically verified by zeta potential, FT-IR and XPS studies. Our work reveals the enormous potential of functionalized MOFs as an appealing platform to construct sorbent materials.

Deciphering the Structural Relationships of Five Cd-Based Metal-Organic Frameworks

The one-pot reaction of Cd(NO₃)₂·4H₂O and 5-(6-(hydroxymethyl)pyridin-3-yl)isophthalic acid (H₂L) in DMF/H₂O (DMF = N,N-dimethylformamide) produced a two-dimensional (2D) metal-organic framework (MOF) of [Cd(L)(H₂O)₂] (A) bearing aqua-bridged Cd centers, accompanied by two three-dimensional (3D) MOFs [Cd(L)(DMF)_0.5] (B) and [Cd(L)] (C). Removing the bridging aqua molecules of A by heating led to the formation of an additional 3D MOF of [Cd(L)] (D) in a single-crystal to single-crystal (SCSC) manner. The search for the preceding compound that could convert to A resulted in the isolation of a 2D MOF [Cd(L)(DMF)] (E) that readily converted to A in water, but with the loss of single crystallinity. Upon excitation at 350 nm, A, D, E, and the ligand H₂L fluoresced at 460 nm, 468 nm, 475 nm, and 411 nm, respectively. The fluorescence of A could be used for the selective detection of Fe³⁺ in water down to 0.58 ppm. This quenching was not affected by the presence of other common metal ions.