Luminescent Lanthanide Cyclen-Based Enzymatic Assay Capable of Diagnosing the Onset of Catheter-Associated Urinary Tract Infections Both in Solution and within Polymeric Hydrogels

A de novo zwitterionic strategy of ultra-stable chemiluminescent probes: highly selective sensing of singlet oxygen in FDA-approved phototherapy

Singlet oxygen (1O2), as a fundamental hallmark in photodynamic therapy (PDT), enables ground-breaking clinical treatment in ablating tumors and killing germs. However, accurate in vivo monitoring of 1O2 remains a significant challenge in probe design, with primary difficulties arising from inherent photo-induced side reactions with poor selectivity. Herein, we report a generalizable zwitterionic strategy for ultra-stable near-infrared (NIR) chemiluminescent probes that ensure a highly specific [2 + 2] cycloaddition between fragile electron-rich enolether units and 1O2 in both cellular and dynamic in vivo domains. Innovatively, zwitterionic chemiluminescence (CL) probes undergo a conversion into an inert ketone excited state with an extremely short lifetime through conical intersection (CI), thereby affording sufficient photostability and suppressing undesired photoreactions. Remarkably, compared with the well-known commercial 1O2 probe SOSG, the zwitterionic probe QMI exhibited an ultra-high signal-to-noise ratio (SNR, over 40-fold). Of particular significance is that the zwitterionic CL probes demonstrate excellent selectivity, high sensitivity, and outstanding photostability, thereby making a breakthrough in real-time tracking of the FDA-approved 5-ALA-mediated in vivo PDT process in living mice. This innovative zwitterionic strategy paves a new pathway for high-performance NIR chemiluminescent probes and high-fidelity feedback on 1O2 for future biological and medical applications.

Lanthanide-Based Probes for Imaging Detection of Enzyme Activities by NIR Luminescence, T1- and ParaCEST MRI

Applying a single molecular probe to monitor enzymatic activities in multiple, complementary imaging modalities is highly desirable to ascertain detection and to avoid the complexity associated with the use of agents of different chemical entities. We demonstrate here the versatility of lanthanide (Ln3+) complexes with respect to their optical and magnetic properties and their potential for enzymatic detection in NIR luminescence, CEST and T1 MR imaging, controlled by the nature of the Ln3+ ion, while using a unique chelator. Based on X-ray structural, photophysical, and solution NMR investigations of a family of Ln3+ DO3A-pyridine model complexes, we could rationalize the luminescence (Eu3+, Yb3+), CEST (Yb3+) and relaxation (Gd3+) properties and their variations between carbamate and amine derivatives. This allowed the design ofL n L G a l 5 ${{{\bf L n L}}_{{\bf G a l}}^{5}}$ probes which undergo enzyme-mediated changes detectable in NIR luminescence, CEST and T1-weighted MRI, respectively governed by variations in their absorption energy, in their exchanging proton pool and in their size, thus relaxation efficacy. We demonstrate that these properties can be exploited for the visualization of β-galactosidase activity in phantom samples by different imaging modalities: NIR optical imaging, CEST and T1-weighted MRI.

Luminescent lanthanide-containing gelatin/polydextran/laponite nanocomposite double-network hydrogels for processing and sensing applications

Lanthanide-containing nanomaterials have gained significant popularity for their utilization in polymeric networks, enabling the creation of luminescent nanocomposites for advanced applications. In this study, we developed a new type of lanthanide-containing nanocomposite hydrogels by incorporating terbium-containing laponite (Tb3+@Lap) into the networks of polyethyleneimine-modified gelatin/polydextran aldehyde (PG/PDA) through dynamic bonds. The structures and properties of the Tb3+@Lap-containing nanocomposite double-network (ncDN) hydrogels were comprehensively investigated in comparison with the DN hydrogels with a pure polymeric network and the Lap-containing ncDN hydrogels. The PG/PDA/Tb3+@Lap ncDN hydrogels with multiple dynamic bonds (i.e., imine bonds, coordination bonds, hydrogen bonds, and electrostatic interactions) exhibited remarkable characteristics of shear-thinning and self-healing, making them suitable for the construction of hydrogel scaffolds on a macroscale using fabrication techniques such as electrospinning and 3D printing. Moreover, the PG/PDA/Tb3+@Lap ncDN hydrogels have been demonstrated to act as sensitive and selective luminescent sensors for detecting copper ions. Taken together, a versatile lanthanide-containing ncDN hydrogel platform capable of dynamic features is developed for processing and sensing applications.

A dual encapsulation strategy to generate anion-responsive luminescent lanthanide hydrogels

We report a new method to generate ion-responsive luminescent hydrogels, involving encapsulation of a luminescent lanthanide probe within crosslinked amphiphilic polymer particles and subsequent entrapment within a hydrogel. The resulting hydrogels are capable of reversible bicarbonate sensing, exhibit no leaching, and can be tuned for a range of sensing applications.

A pillar[5]arene noncovalent assembly boosts a full-color lanthanide supramolecular light switch

A photo-responsive full-color lanthanide supramolecular switch was constructed from a synthetic 2,6-pyridine dicarboxylic acid (DPA)-modified pillar[5]arene (H) complexing with lanthanide ion (Ln3+ = Tb3+ and Eu3+) and dicationic diarylethene derivative (G1) through a noncovalent supramolecular assembly. Benefiting from the strong complexation between DPA and Ln3+ with a 3 : 1 stoichiometric ratio, the supramolecular complex H/Ln3+ presented an emerging lanthanide emission in the aqueous and organic phase. Subsequently, a network supramolecular polymer was formed by H/Ln3+ further encapsulating dicationic G1via the hydrophobic cavity of pillar[5]arene, which greatly contributed to the increased emission intensity and lifetime, and also resulted in the formation of a lanthanide supramolecular light switch. Moreover, full-color luminescence, especially white light emission, was achieved in aqueous (CIE: 0.31, 0.32) and dichloromethane (CIE: 0.31, 0.33) solutions by the adjustment of different ratios of Tb3+ and Eu3+. Notably, the photo-reversible luminescence properties of the assembly were tuned via alternant UV/vis light irradiation due to the conformation-dependent photochromic energy transfer between the lanthanide and the open/closed-ring of diarylethene. Ultimately, the prepared lanthanide supramolecular switch was successfully applied to anti-counterfeiting through the use of intelligent multicolored writing inks, and presents new opportunities for the design of advanced stimuli-responsive on-demand color tuning with lanthanide luminescent materials.

Generating water/MeOH-soluble and luminescent polymers by grafting 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligands onto a poly(ethylene-alt-maleic anhydride) polymer and cross-linking with terbium(III)

The synthesis of two new polymers made from P(E-alt-MA) (poly(ethylene-alt-maleic anhydride) and possessing 2,6-bis(1,2,3-triazol-4-yl)pyridine (btp) ligand side chains in 3 and 6 mol%, respectively (P1 and P2, respectively) is described. These polymers were shown to be soluble in MeOH solution and, in the case of P1, also in water, while P2 needed prolonged heating to enable water dissolution. Btp ligands are known for coordinating both d- and f-metal ions and so, herein, we demonstrate by using both UV-Vis absorption, fluorescence emission, as well as time-gated phosphorescence spectroscopies, that both P1 and P2 can bind to Tb(III) ions to give rise to luminescent polymers. From the analysis of the titration data, which demonstrated large changes in the emission intensity properties of the polymer upon Tb(III) binding (ground state changes were also clearly observed, with the absorption being red-shifted at lower energy), we show that the dominant stoichiometry in solution is 1 : 2 (M : L; Tb(III) : btp ratio) which implies that two btp ligands from the polymer background are able to crosslink through lanthanide coordination and that the backbone of the polymer is very likely to aid in coordinating the ions.

Highly Stable Europium(III) Tetrahedral (Eu4L4)(phen)4 Cage: Structure, Luminescence Properties, and Cellular Imaging

Luminescent lanthanide cages have many potential applications in guest recognition, sensing, magnetic resonance imaging (MRI), and bioimaging. However, these polynuclear lanthanide assemblies' poor stability, dispersity, and luminescence properties have significantly constrained their practical applications. Furthermore, it is still a huge challenge to simultaneously synthesize and design lanthanide organic polyhedra with high stability and quantum yield. Herein, we demonstrate a simple and robust strategy to improve the rigidity, chemical stability, and luminescence of an Eu(III) tetrahedral cage by introducing the conjugated planar auxiliary phen ligand. The self-assembled tetrahedral cage, (Eu₄L₄)(phen)₄ [L = (4,4',4″-tris(4,4,4-trifluoro-1,3-dioxobutyl)-triphenylamine), phen = 1,10-phenanthroline], exhibited characteristic luminescence of Eu³⁺ ions with high quantum yield (41%) and long lifetime (131 μs) in toluene (1.0 × 10^-6 M). Moreover, the Eu(III) cage was stable in water and even in an aqueous solution with a pH range of 1-14. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay and cellular imaging revealed that the Pluronic F127-coated hybrid material, (Eu₄L₄)(phen)₄@F127, exhibited low cytotoxicity, good biocompatibility, and cellular imaging ability, which may inspire more insights into the development of lanthanide organic polyhedra (LOPs) for potential biomedical applications.

Time-Resolved Luminescent Sensing and Imaging for Enzyme Catalytic Activity Based on Responsive Probes

Enzymes, as a kind of biomacromolecules, play an important role in many physiological processes and relate directly to various diseases. Developing an efficient detection method for enzyme activity is important to achieve early diagnosis of enzyme-relevant diseases and high throughput screening of potential enzyme-relevant drugs. Time-resolved luminescence assay provide a high accuracy and signal-to-noise ratios detection methods for enzyme activity, which has been widely used in high throughput screening of enzyme-relevant drugs and diagnosis of enzyme-relevant diseases. Inspired by these advantages, various responsive probes based on metal complexes and metal-free organic compounds have been developed for time-resolved bioimaging and biosensing of enzyme activity owing to their long luminescence lifetimes, high quantum yields and photostability. In this review, we comprehensively reviewed metal complex- and metal-free organic compound-based responsive probes applied to detect enzyme activity through time-resolved imaging, including their design strategies and sensing principles. Current challenges and future prospects in this rapidly growing field are also discussed.

Stimuli-Responsive Antibacterial Materials: Molecular Structures, Design Principles, and Biomedical Applications

Infections are regarded as the most severe complication associated with human health, which are urgent to be solved. Stimuli-responsive materials are appealing therapeutic platforms for antibacterial treatments, which provide great potential for accurate theranostics. In this review, the advantages, the response mechanisms, and the key design principles of stimuli-responsive antibacterial materials are highlighted. The biomedical applications, the current challenges, and future directions of stimuli-responsive antibacterial materials are also discussed. First, the categories of stimuli-responsive antibacterial materials are comprehensively itemized based on different sources of stimuli, including external physical environmental stimuli (e.g., temperature, light, electricity, salt, etc.) and bacterial metabolites stimuli (e.g., acid, enzyme, redox, etc.). Second, structural characteristics, design principles, and biomedical applications of the responsive materials are discussed, and the underlying interrelationships are revealed. The molecular structures and design principles are closely related to the sources of stimuli. Finally, the challenging issues of stimuli-responsive materials are proposed. This review will provide scientific guidance to promote the clinical applications of stimuli-responsive antibacterial materials.

Anion binding to a cationic europium(III) probe enables the first real-time assay of heparan sulfotransferase activity

Sulfotransferases constitute a ubiquitous class of enzymes which are poorly understood due to the lack of a convenient tool for screening their activity. These enzymes use the anion PAPS (adenosine-3'-phosphate-5'-phosphosulfate) as a donor for a broad range of acceptor substrates, including carbohydrates, producing sulfated compounds and PAP (adenosine-3',5'-diphosphate) as a side product. We present a europium(III)-based probe that binds reversibly to both PAPS and PAP, producing a larger luminescence enhancement with the latter anion. We exploit this greater emission enhancement with PAP to demonstrate the first direct real-time assay of a heparan sulfate sulfotransferase using a multi-well plate format. The selective response of our probe towards PAP over structurally similar nucleoside phosphate anions, and over other anions, is investigated and discussed. This work opens the possibility of investigating more fully the roles played by this enzyme class in health and disease, including operationally simple inhibitor screening.

Smart luminescent hydrogel with superior mechanical performance based on polymer networks embedded with lanthanide containing clay nanocomposites

Due to their inherent biocompatibility and unique optical properties, luminescent hydrogels have recently garnered tremendous interest. However, most of the explored luminescent hydrogels cannot well meet the requirements of both sufficient mechanical properties and smart luminescence. Here we report a smart luminescent hydrogel with superior mechanical performance by in situ copolymerization of the acrylamide monomers and lanthanide loaded clay nanosheets. The Eu-DPA@clay nanosheets emitting center can not only be well dispersed in aqueous solution, but also maintain robust luminescence. Interestingly, the additional interaction between the Eu-DPA@clay nanosheets and the polymer network endows the hydrogel with excellent mechanical properties. Moreover, a luminescence on/off switch is also achieved by alternative acid and base stimuli, which may have potential applications in smart luminescent devices.

Multistimuli-Responsive Lanthanide-Containing Smart Luminescent Hydrogel Actuator

Stimuli-responsive hydrogels are flourishing; however, a multiresponsive luminescent hydrogel actuator in which the stimuli do not interfere with each other is still difficult to produce. Here, a smart luminescent bilayer hydrogel actuator with shape memory and reversible luminescence switch behaviors under the co-stimulation of pH and heating is reported. Under alkaline condition, chitosan-containing layer generates physical microcrystals to fix the temporary shape of the actuator while lanthanide emits bright luminescence. Upon acid treatment, the actuator recovers to its original shape and the luminescence is quenched since the "antenna effect" between organic ligand and lanthanide ions is disrupted. It is to be noticed that this multiresponsive cycle can be repeated several times without interfering each other. This work is expected to have potential application prospects in the fields of biomimetic soft robots, sensors, and camouflage.

Advances in anion binding and sensing using luminescent lanthanide complexes

Luminescent lanthanide complexes have been actively studied as selective anion receptors for the past two decades. Ln(iii) complexes, particularly of europium(iii) and terbium(iii), offer unique photophysical properties that are very valuable for anion sensing in biological media, including long luminescence lifetimes (milliseconds) that enable time-gating methods to eliminate background autofluorescence from biomolecules, and line-like emission spectra that allow ratiometric measurements. By careful design of the organic ligand, stable Ln(iii) complexes can be devised for rapid and reversible anion binding, providing a luminescence response that is fast and sensitive, offering the high spatial resolution required for biological imaging applications. This review focuses on recent progress in the development of Ln(iii) receptors that exhibit sufficiently high anion selectivity to be utilised in biological or environmental sensing applications. We evaluate the mechanisms of anion binding and sensing, and the strategies employed to tune anion affinity and selectivity, through variations in the structure and geometry of the ligand. We highlight examples of luminescent Ln(iii) receptors that have been utilised to detect and quantify specific anions in biological media (e.g. human serum), monitor enzyme reactions in real-time, and visualise target anions with high sensitivity in living cells.

An acylhydrazone-based AIE organogel for the selective sensing of submicromolar level Al3+ and Al(iii)-based metallogel formation to detect oxalic acid

The compound L can be fluorescence-tunable depending on the water volume fraction and optically sense Al³⁺ without interference.

Combination of imine bond and samarium emitter enables turn-off fluorescence detection of hydrazine in vapor and water samples

The development of convenient and efficient fluorescence techniques is of great significance for selective detection and precise determination of biotoxic N₂H₄ in human health and environmental sciences. By the pre-organization-assisted template synthesis, disclosed here is a luminescent Sm(III) macrocycle-based probe Sm-2_m bearing dynamic imine bonds as recognition moieties which provides the selective and ratiometric turn-off fluorescence sensing for N₂H₄ over various amine species based on the N₂H₄-induced structure transformation. This fluorescent sensing process finished within 20 min shows the low limit of detection (0.18 μM, 7.2 ppb) and wide linear sensing range (0-60.0 μM). Furthermore, probe Sm-2_m is also be used to quantitatively determine N₂H₄ in vapor gas and water samples through fluorescence color changes, which are evaluated by the Sm-2_m-impregnated test paper strips and RGB value outputs. Finally, our proposed smartphone-based analytical method gives satisfactory N₂H₄ detection results. It is thus believed that this work can shed some lights on development of optical probes and detection techniques for N₂H₄, even other hazardous chemicals.

High-Throughput Platform for Real-Time Monitoring of ATP-Generating Enzymes in Living Cells Based on a Lanthanide Probe

Remarkable variation between cell-free and cellular measurements of enzyme activity triggered the unmet need to develop tools for monitoring enzyme activity in living cells. Such tools will advance our understanding of the biological functions of enzymes and their potential impact on drug discovery. We report in this study a universal assay for monitoring ATP-generating enzymes in living cells using a self-assembled Tb³⁺ complex probe. Modulation of the rheological properties of cell culture media enabled shifting the lifetime of the Tb³⁺ complex in the presence of ATP from micro-to-millisecond range. Based on the response of the Tb³⁺ complex to ATP, cellular assays for 5 ATP-generating enzymes were developed. Remarkably, assessment of the activity of these enzymes in living cells is made possible for the first time. The pyruvate kinase M2 (PKM2) assay has been optimized for high-throughput screening (HTS) and further implemented in the identification of novel scaffolds as PKM2 inhibitors.

Multiresponsive White-Light Emitting Aerogel Prepared with Codoped Lanthanide/Thymidine/Carbon Dots

Aerogels hold great promise as a lightweight replacement in materials fields. Dynamic fluorochromic aerogels that possess reversible stimuli responsiveness have been particularly attractive recently for new design opportunities in practical solid-state lighting and wide applications in advanced sensors/probe. In this study, we report a reversibly multiresponsive white-light-emitting (WLE) aerogel prepared with codoped lanthanide, thymidine, and carbon dots. By precisely modulating the stoichiometric ratio of lanthanide complexes and carbon dots, broad-spectrum output from purple to red is obtained, including pure white light (CIE (0.33, 0.32)). The freeze-drying process contributes to the elimination of hydration between water molecules and lanthanide ions, further preventing the quenching of lanthanide luminescence and preserving the high quantum yield (47.4%) of our aerogel. Moreover, the dynamic coordination bond between lanthanide (europium and terbium) and thymidine endows the aerogel with reversible responsiveness upon five different stimuli, including halide anions, metal ions, pH, temperature, and humidity. We envision that our WLE aerogel has considerable potential for use in various fields such as display devices, advanced sensors, and environmentally friendly probes where multiresponsiveness is required.

Recent advances in coordination-driven polymeric gel materials: design and applications

Recently, research attention has been directed towards the coordination driven synthesis of gels, including coordination polymer gels (CPGs) and metal-organic cage based gels, which have shown applications in diverse fields, including optoelectronics, catalysis, sensing, gas-storage, and self-healing. A wide variety of CPGs and metal-organic cage based gels have been reported, to date, by choosing the right combination of metal ions and rationally designed organic linkers. In this article, we focused on recent developments in CPGs and metal-organic cage based gels and their applications.

Luminescent Sm(III) complex bearing dynamic imine bonds as a multi-responsive fluorescent sensor for F- and PO43- anions together with Zn2+ cation in water samples

We have designed and synthesized a new luminescent mononuclear samarium (III) complex Sm-2_h based on the [1 + 1] Schiff-base macrocycle H₂L2_h, derived from the cyclocondensation reaction between dialdehyde and diamine precursors, and its exact architecture is determined to be [Sm(HL2_h) (NO₃)₂]. The sensing ability of complex Sm-2_h is carefully evaluated for various common inorganic ions in solution. It is shown that complex Sm-2_h is a multi-responsive fluorimetric sensor with high selectivity for F^- and PO₄^3- anions together with Zn²⁺ cation. The sensing process is rapid within 60 s for F^- and PO₄^3- ions and 300 s for Zn²⁺ ion. Further detailed responsive investigations suggest that its sensing behavior has excellent linear relationship between the fluorescence intensity (or absorption value) and ion concentration. The limit of detection (LOD) for sensing F^-, PO₄^3- and Zn²⁺ ions are as low as 2.61 μM (2.94 μM), 1.92 μM (1.64 μM) and 5.67 μM (3.53 μM), respectively, verified by fluorimetric (or colorimetric) titration experiments. ESI mass spectra prove that these efficient detections originate from the structure collapse of sensor Sm-2_h because of the ion-induced imine bond breakage. Moreover, sensor Sm-2_h shows excellent sensing performances for F^-, PO₄^3- and Zn²⁺ ions in real water samples, and we also have developed a convenient method to detect these three ions by use of the sensor impregnated test paper strips, providing rapid and distinguishable fluorimetric color changes. Therefore, the macrocyclic Sm(III) complex Sm-2_h could be regarded as a valuable candidate for monitoring F^-, PO₄^3- and Zn²⁺ ions in practical applications.

Innovations in indwelling urethral catheterisation

The indwelling urethral catheter remains an integral part of contemporary medical care, despite its significant design shortcomings. Urethral catheterisation is responsible for well-recognised complications including catheter-associated urinary tract infection (CAUTI), catheter-associated urethral injury (CAUI), catheter blockage, and bladder mucosal irritation. In this narrative review, we provide an update on current innovations in urethral catheter design, aimed at safeguarding against these complications. There is an obvious need to improve catheter technology and urologists should support the translation of innovations into clinical practice.

A bioorthogonal time-resolved luminogenic probe for metabolic labelling and imaging of glycans

A terbium complex Tb-1 was demonstrated to undergo bioorthogonal ligation with engineered cell-surface glycans, which results in a much less efficient LRET and a 5-fold increase in long-lived terbium emission with low toxicity.

Multiresponsive Supramolecular Luminescent Hydrogels Based on a Nucleoside/Lanthanide Complex

Supramolecular luminescent hydrogels based on natural molecules have shown high potential for a variety of applications because of unique optical properties and biocompatibility, particularly serving as advanced biomaterials for bioimaging, biosensing, cell engineering, and so forth. A lanthanide complex-based system provides a promising way to prepare supramolecular luminescent hydrogels. Herein, we realize the creation of a luminescent hydrogel assembled from lanthanides and nucleosides. Nucleosides, the essential components of nucleic acids, functioning as the ligands, successfully chelate with lanthanides and form complexes in water. The complexes subsequently serve as building-blocks to form supramolecular hydrogels, which exhibit characteristic luminescent emission of lanthanides. The coordination modes and forming mechanism are studied by electrospray ionization time-of-flight mass spectrometry, matrix-assisted laser desorption/ionization time of flight mass spectrometry, ¹H NMR spectroscopy, and Fourier transform infrared spectroscopy; the corresponding molecular simulations are presented, and macro-/micro-morphologies, mechanical properties, and luminescent performances of hydrogels are systemically studied. Remarkably, these luminescent hydrogels show fluorochromic properties in response to external stimuli, including pH, temperature, anions, and cations, which are thus adopted to design smart luminescent switches and detect specific species such as Cu²⁺. Our work provides a feasible strategy to prepare stimuli-responsive luminescent hydrogels, reveals the diverse potential of nucleoside-based hydrogels, and exhibits a novel pathway for the preparation of smart optical materials.

Photoswitchable J-Aggregated Processable Organogel by Integrating a Photochromic Acceptor

A novel π-chromophoric 1,4-bis(anthracenylethynyl)benzene (BAB)-based highly emissive J-aggregated organogel has been synthesized and characterized. Single-crystal structure determination of asymmetric π-chromophoric bola-amphiphilic BAB1 (dodecyl and triethyleneglycolmonomethylether containing side chains of bis(anthracenylethynyl)benzene) supports J-aggregation. Further, a photochromic acceptor chromophore, 4,4'-(perfluorocyclopent-1-ene-1,2-diyl)bis(5-methylthiophene-2-carbaldehyde), is noncovalently encapsulated in the gel and photoswitching studies have been performed based on photochromic Förster resonance energy transfer. The modulated emission of the processable soft material is further exploited for rewritable display. However, BAB2 (dodecyl side chain on both sides) does not show gelation property due to its low solubility.

Multifunctional supramolecular self-assembly system for colorimetric detection of Hg2+, Fe3+, Cu2+ and continuous sensing of volatile acids and organic amine gases

A novel multifunctional gelator (1) based on an azobenzene derivative was designed and characterized. This compound could gelate some solvents including hexane, petroleum ether, DMSO, acetonitrile and ethanol through a heating-cooling procedure. The self-assembly process in different solvents was studied by means of UV-vis absorption and Fourier transform infrared (FTIR) spectra, field emission scanning electron microscopy (FESEM), rheological measurements, X-ray powder diffraction and water contact angle experiments. Interestingly, compound 1 had a high-contrast colorimetric detection ability towards Hg2+, Cu2+, Fe3+ and volatile acids and further organic amine gases in solution through its color change. At the same time, organogel 1 in acetonitrile also exhibited detection performance through a color or gel state change. In the response process, the self-assembly structures were changed from a nanofiber into a microsphere under induction by analytes. More significantly, film 1 could continuously detect volatile acids and organic amine gases. The number of cycles of film 1 for the detection of volatile acids and organic amine gases was at least seven times. The limit of detection (LOD) of film 1 towards TFA was calculated to be 0.0848 ppb. The sensing mechanisms were studied using 1HNMR, FESEM, UV-vis absorption spectra and HRMS. The intramolecular cyclization occurred on molecule 1 and a H2S molecule was lost during the detection process of Hg2+. It was proposed that the -N[double bond, length as m-dash]N- bonding could be coordinated by Fe3+ and Cu2+ and this further induced the absorption spectra and color change. For a volatile acid, it was possible that the volatile acid was combined with the N,N-dimethyl amine group of molecule 1. This research opens up a novel pathway to the fabrication of supramolecular self-assembly gels to detect polymetallic ions and trace volatile acids in the environment.

A simple, robust, universal assay for real-time enzyme monitoring by signalling changes in nucleoside phosphate anion concentration using a europium(iii)-based anion receptor

Enzymes that consume and produce nucleoside polyphosphate (NPP) anions represent major targets in drug discovery. For example, protein kinases are one of the largest classes of drug targets in the fight against cancer. The accurate determination of enzyme kinetics and mechanisms is a critical aspect of drug discovery research. To increase confidence in the selection of lead drug compounds it is crucial that pharmaceutical researchers have robust, affordable assays to measure enzyme activity accurately. We present a simple, sensitive microplate assay for real-time monitoring of a range of pharmaceutically important enzyme reactions that generate NPP anions, including kinases and glycosyltransferases. Our assay utilises a single, stable europium(iii) complex that binds reversibly to NPP anions, signalling the dynamic changes in NPP product/substrate ratio during an enzyme reaction using time-resolved luminescence. This supramolecular approach to enzyme monitoring overcomes significant limitations in existing assays, obviating the need for expensive antibodies or equipment, chemically labelled substrates or products and isolation or purification steps. Our label and antibody-free method enables rapid and quantitative analysis of enzyme activities and inhibition, offering a potentially powerful tool for use in drug discovery, suitable for high-throughput screening of inhibitors and accurate measurements of enzyme kinetic parameters.

A Reversibly Responsive Fluorochromic Hydrogel Based on Lanthanide-Mannose Complex

Fluorochromic materials that are dynamic in response to external stimuli are of great interest for the development of advanced sensors and luminescent materials. Herein, a design based on a lanthanide-containing polymeric hydrogel possessing characteristic emission of lanthanides (Eu and Tb) and showing response to stimuli of metal ions is reported. The fluorochromic hydrogel is prepared using a lanthanide-mannose complex in gelation matrix. The lanthanide-mannose complex shows tunable fluorescent emission in response to Fe2+, due to the inhibition of the "antenna effect" between metal ions and ligands upon stimulation. The fluorescent hydrogel shows reversible "On/Off" fluorochromic response to Fe2+/ethylenediaminetetraacetic acid (EDTA). Remarkably, the fluorescent hydrogel is proven nontoxic and biocompatible; and a proof-of-application as in situ 3D cell culture extracellular matrix with reversible fluorochromic "On/Off" switch upon Fe2+/EDTA is demonstrated. This reversibly responsive fluorochromic hydrogel demonstrates a way to fabricate smart optical materials, particularly for biological-related applications where reversible response is required.

Ammonia-Responsive Luminescence of Ln3+-β-diketonate Complex Encapsulated within Zeolite Y

Assembling Ln³⁺(HPBA_n) (Ln = Eu or Tb, HPBA = N-(2-pyridinyl)benzoylacetamide) in the cavities of zeolite Y (ZY) via the “ship-in-a-bottle” strategy leads to the formation of novel luminescent composite, Ln(HPBA_n)@ZY, whose luminescence can be easily modulated by ammonia on the basis of the energy level variation of HPBA after deprotonation process. Additionally the bimetallic complex doping sample, Eu_0.5Tb_0.5(HPBA_n)@ZY, show great potential as self-referencing luminescent sensor for detecting low ammonia concentration of 10⁻¹²–0.25 wt%.

Luminescent lanthanide (Eu(iii)) cross-linked supramolecular metallo co-polymeric hydrogels: the effect of ligand symmetry

Two lanthanide luminescent naphthyl-dipicolinic amide (dpa) methacrylate monomers for the synthesis of grafted supramolecular co-polymer gels (hydrogels), and their use as additional crosslinks in robust covalently cross-linked HEMA hydrogels is presented.

A liquid crystal based method for detection of urease activity and heavy metal ions by using stimulus-responsive surfactant-encapsulated phosphotungstate clusters

A liquid crystal (LC) based method is described for the sensitive determination of the activity of urease and of heavy metal ions which acts as inhibitors. Stimulus-responsive surfactant-encapsulated phosphotungstate clusters (SECs) were fabricated and deposited onto octadecyltrichlorosilane-coated glass. A copper TEM grid filled with LCs was placed on the substrate to construct the LC optical cell. Upon addition of water to the LC interface, the optical appearance of LCs on the glass undergoes a bright-to-dark shift due to an orientational transition of the LCs from a planar to a homeotropic state. However, the LCs display a bright appearance if they are pretreated with an aqueous solution containing urea and urease. This is caused by the disassemby of the SECs from the glass surface due to an increase of the pH value that is induced by the enzymatic hydrolysis of urea by urease. The method is highly sensitive and can detect urease activities as low as 0.03 mU/mL. It can also be applied to the determination of heavy metal ions which exert an inhibitory effect on the activity of urease. For example, Cu(II) can be quantified via urease inhibition in 1 nM concentration. Graphical abstract Schematic presentation of a liquid crystal-based sensor for detection of urease and heavy metal ions by using stimulus-responsive surfactant-encapsulated phosphotungstate clusters.

Recent advances in the development of luminescent lanthanide-based supramolecular polymers and soft materials

Combination of different properties has always proven effective in the generation of hybrid materials with novel interesting properties. Ln(iii) containing materials possessing multiple properties are useful in a wide range of applications. In this article, key and recent examples of metallo-supramolecular polymers in the formation of gels, soft polymeric materials and films are discussed. There is a focus on the use of trivalent lanthanide, Ln(iii), ions to provide soft materials with advanced mechanical and luminescence properties for applications in developing electronic- and bio-technologies. This frontier article has been written with the intention of reaching a broad range of readers from various backgrounds such as chemistry, materials chemistry, spectroscopy and biochemistry. Additionally, we evaluate how the unique and versatile properties of such hybrid materials can be tuned and explored to enhance the efficiency, as well as research, for new ones. Finally, an assessment of the current state-of-the-art and our outlook for the future of this field is made.

Recognition of proximally phosphorylated tyrosine residues and continuous analysis of phosphatase activity using a stable europium complex

The recognition of proteins and their post-translational modifications using synthetic molecules is an active area of research. A common post-translational modification is the phosphorylation of serine, threonine or tyrosine residues. The phosphorylation of proximal tyrosine residues occurs in over 1000 proteins in the human proteome, including in disease-related proteins, so the recognition of this motif is of particular interest. We have developed a luminescent europium(III) complex, [Eu.1]+ , capable of the discrimination of proximally phosphorylated tyrosine residues, from analogous mono- and non-phosphorylated tyrosine residues, more distantly-related phosphotyrosine residues and over proximally phosphorylated serine and threonine residues. [Eu.1]+ was used to continuously monitor the phosphatase catalysed dephosphorylation of a peptide containing proximally phosphorylated tyrosine residues.

Application of lanthanide luminescence in probing enzyme activity

Enzymes play critical roles in the regulation of cellular function and are implicated in numerous disease conditions. Reliable and practicable assays are required to study enzyme activity, to facilitate the discovery of inhibitors and activators of enzymes related to disease. In recent years, a variety of enzyme assays have been devised that utilise luminescent lanthanide(iii) complexes, taking advantage of their high detection sensitivities, long luminescence lifetimes, and line-like emission spectra that permit ratiometric and time-resolved analyses. In this Feature article, we focus on recent progress in the development of enzyme activity assays based on lanthanide(iii) luminescence, covering a variety of strategies including Ln(iii)-labelled antibodies and proteins, Ln(iii) ion encapsulation within defined peptide sequences, reactivity-based Ln(iii) probes, and discrete Ln(iii) complexes. Emerging approaches for monitoring enzyme activity are discussed, including the use of anion responsive lanthanide(iii) complexes, capable of molecular recognition and luminescence signalling of polyphosphate anions.

Emerging medical and engineering strategies for the prevention of long-term indwelling catheter blockage

Urinary catheters have been used on an intermittent or indwelling basis for centuries, in order to relieve urinary retention and incontinence. Nevertheless, the use of urinary catheters in the clinical setting is fraught with complication, the most common of which is the development of nosocomial urinary tract infections, known as catheter-associated urinary tract infections. Infections of this nature are not only significant owing to their high incidence rate and subsequent economic burden but also to the severe medical consecutions that result. A range of techniques have been employed in recent years, utilising various technologies in attempts to counteract the perilous medical cascade following catheter blockage. This review will focus on the current advancement (within the last 10 years) in prevention of encrustation and blockage of long-term indwelling catheters both from engineering and medical perspectives, with particular emphasis on the importance of stimuli-responsive systems.

Coordination chemistry of flexible benzene-1,3,5-tricarboxamide derived carboxylates; notable structural resilience and vaguely familiar packing motifs

Flexible benzene-1,3,5-tricarboxamides (BTAs), organic species well-known for their tendencies to form functional soft-materials by virtue of their complementary hydrogen bonding, are explored as structurally reinforcing supramolecular building blocks in porous coordination polymers. We report the synthesis and characterisation of two related, carboxylate-terminated BTA derivatives, and the structure and functionality of their polymeric Cd(ii) complexes. The polycarboxylate ligand benzene-1,3,5-tricarboxamide tris(phenylacetic acid) H3L1 was prepared, and the analogous trimethyl benzene-1,3,5-tricarboxamide tris acetate Me3L2 was prepared and its single crystal structure elucidated. On reaction with cadmium nitrate in a DMF/H2O mixture, each BTA compound yielded coordination polymer species with columnar packing motifs comparable to the familiar BTA triple helix seen in purely organic systems. In the case of Me3L2, this transformation was achieved through a convenient in situ ester hydrolysis. Complex 1 is a 2-dimensional layered material containing tubular intralayer pores, in which amide-amide hydrogen bonding is a notable structural feature. In contrast, the structure of 2 contains no amide-amide hydrogen bonding, and instead a columnar arrangement of ligand species is linked by trinuclear Cd(ii) cluster nodes into a densely packed three-dimensional framework. The crystal structures revealed both materials exhibited significant solvent-accessible volume, and this was probed with thermal analysis and CO2 and N2 adsorption experiments; complex 2 showed negligible gas uptake, while compound 1 possesses an unusually high CO2 capacity for a two-dimensional material with intralayer porosity and surprising structural resilience to guest exchange, evacuation and exposure to air.

Orthogonally Protected Diaminoterephthalate Scaffolds: Installation of Two Functional Units at the Chromophore

The 2,5-diaminoterephthalate structural motif is a powerful chromophore with remarkable fluorescence properties. Containing two carboxylate and two amino functions, it defines a colored molecular scaffold which allows for orthogonal functionalization with different functional units. Therefore, different applications in life sciences and materials science could be addressed. In this study, the two amino functions were alkylated by reductive amination with side chains carrying amino (orthogonally protected as Boc or Alloc) and carboxylate functions (orthogonally protected as tBu or allyl ester). After sequential deprotections, functional units were introduced by amidation reactions. As three examples, the chromophore was coupled with retinoic acid and fullerene C₆₀ in order to obtain a triad for studying photoinduced electron transfer processes. Furthermore, cyclooctyne and azide moieties were introduced as functional units, allowing for ligation by click reactions. These two clickable groups were applied in combination with maleimide units which are reactive toward thiol residues. The latter dyes define so-called "turn on" probes, since the fluorescence quantum yields increased by one order of magnitude upon reaction with the molecular target.

Eu/Tb luminescence for alkaline phosphatase and β-galactosidase assay in hydrogels and on paper devices

Simple technologies for efficient detection of important (bio)molecules are always in great demand. We now report the detection and assay of two biologically important enzymes, alkaline phosphatase and β-galactosidase, in Eu- or Tb-based cholate hydrogels, respectively, and on filter paper discs coated with such hydrogels. Pro-sensitizers derived from 1-hydroxypyrene and 2,3-dihydroxynaphthalene were incorporated into Eu or Tb cholate hydrogels, respectively. Upon enzyme action, these artificial substrates liberate free sensitizers both in the gel and on gel-coated discs, resulting in turn-on luminescence, red/magenta for Eu, and green for Tb. The detection of enzymes was also demonstrated in natural/biological samples using low-cost systems.

A continuous luminescence assay for monitoring kinase activity: signalling the ADP/ATP ratio using a discrete europium complex

We report the application of a stable cationic europium complex [Eu.1]+ in a continuous-read luminescence assay for kinase activity. [Eu.1]+ binds reversibly to ATP and ADP in water, at neutral pH, in the presence of Mg²⁺ ions, providing distinctive luminescence responses that permits the kinase-catalysed conversion of ATP to ADP to be monitored in real-time.

Pure white light emission and charge transfer in organogels of symmetrical and unsymmetrical π-chromophoric oligo-p-(phenyleneethynylene) bola-amphiphiles

The gelation behavior of two novel π-chromophoric bola-amphiphiles has been studied and solution processable pure white light emitting and CT gels have been realized.

A study of the Group 1 metal tetra-aza macrocyclic complexes [M(Me4cyclen)(L)]+ using electronic structure calculations

Metal-cyclen complexes have a number of important applications. However, the coordination chemistry between metal ions and cyclen-based macrocycles is much less well studied compared to their metal ion-crown ether analogues. This work, which makes a contribution to address this imbalance by studying complex ions of the type [M(Me₄cyclen)(L)]⁺, was initiated by results of an experimental study which prepared some Group 1 metal cyclen complexes, namely [Li(Me₄cyclen)(H₂O)][BAr^F] and [Na(Me₄cyclen)(THF)][BAr^F] and obtained their X-ray crystal structures [J. M. Dyke, W. Levason, M. E. Light, D. Pugh, G. Reid, H. Bhakhoa, P. Ramasami, and L. Rhyman, Dalton Trans., 2015, 44, 13853]. The lowest [M(Me₄cyclen)(L)]⁺ minimum energy structures (M = Li, Na, K, and L = H₂O, THF, DEE, MeOH, DCM) are studied using density functional theory (DFT) calculations. The geometry of each [M(Me₄cyclen)(L)]⁺ structure and, in particular, the conformation of L are found to be mainly governed by steric hindrance which decreases as the size of the ionic radius increases from Li⁺ → Na⁺ → K⁺. Good agreement of computed geometrical parameters of [Li(Me₄cyclen)(H₂O)]⁺ and [Na(Me₄cyclen)(THF)]⁺ with the corresponding geometrical parameters derived from the crystal structures [Li(Me₄cyclen)(H₂O)]⁺[BAr^F]^- and [Na(Me₄cyclen)(THF)]⁺[BAr^F]^- is obtained. Bonding analysis indicates that the stability of the [M(Me₄cyclen)(L)]⁺ structures originates mainly from ionic interaction between the Me₄cyclen/L ligands and the M⁺ centres. The experimental observation that [M(Me₄cyclen)(L)]⁺[BAr^F]^- complexes could be prepared in crystalline form for M⁺ = Li⁺ and Na⁺, but that experiments aimed at synthesising the corresponding K⁺, Rb⁺, and Cs⁺ complexes failed resulting in formation of [Me₄cyclenH][BAr^F] is investigated using DFT and explicitly correlated calculations, and explained by considering production of [Me₄cyclenH]⁺ by a hydrolysis reaction, involving traces of water, which competes with [M(Me₄cyclen)(L)]⁺ formation. [Me₄cyclenH]⁺ formation dominates for M⁺ = K⁺, Rb⁺, and Cs⁺ whereas formation of [M(Me₄cyclen)(L)]⁺ is energetically favoured for M⁺ = Li⁺ and Na⁺. The results indicate that the number and type of ligands, play a key role in stabilising the [M(Me₄cyclen)]⁺ complexes and it is hoped that this work will encourage experimentalists to prepare and characterise other [M(Me₄cyclen)(L)]⁺ complexes.