Unprecedented Reaction Mode of Phosphorus in Phosphinidene Rare-Earth Complexes: A Joint Experimental–Theoretical Study

Dinuclear ytterbium(III) benzamidinate complexes with bridging S32-, Se22- and Te22- ligands: synthesis, structure and magnetic properties

Treatment of Yb(II) complex [L2Yb(THF)2] (L = PhC(NSiMe3)2) with elemental sulfur, selenium or tellurium resulted in the isolation of a series of dinuclear Yb(III) complexes featuring side-on bound S32- (1), Se22- (2) or Te22- (3) moieties, respectively. Magnetic study on these complexes revealed that 3 is a rare lanthanide telluride single-molecule magnet (SMM).

Correction: f-Element heavy pnictogen chemistry

[This corrects the article DOI: 10.1039/D3SC05056D.].

Rare-earth metal ethylene and ethyne complexes

Guanidinate homometallic rare-earth ethyl complexes [LLn(μ2-η1:η2-Et)(Et)]2 (Ln = Y(1-Y), Lu(1-Lu)) and heterobimetallic rare-earth ethyl complexes LLn(Et)(μ2-η1:η2-Et)(μ2-η1-Et)(AlEt2) (Ln = Y(2-Y), Lu(2-Lu)) have been synthesized by the treatment of LLn(CH2C6H4NMe2-o)2 (L = (PhCH2)2NC(NC6H3iPr2-2,6)2) with different equivalents of AlEt3 in toluene at ambient temperature. Interestingly, the unprecedented rare-earth ethyne complex [LY(μ2-η1-Et)2(AlEt)]2(μ4-η1:η1:η2:η2-C2H2) (3-Y) containing a [C2H2]4- unit was afforded from 2-Y. The formation mechanism study on 3-Y was carried out by DFT calculations. Furthermore, the nature of the bonding of 3-Y was also revealed by NBO analysis. The reactions of LLn(CH2 C6H4NMe2-o)2 (Ln = Y, Lu) with AlEt3 (4 equiv.) in toluene at 50 °C produced firstly the non-Cp rare-earth ethylene complex LY(μ3-η1:η1:η2-C2H4)[(μ2-η1-Et)(AlEt2)(μ2-η1-Et)2(AlEt)] (4-Y), and the Y/Al ethyl complex LY[(μ2-η1-Et)2(AlEt2)]2 (5-Y) as an intermediate of 4-Y was isolated from the reaction of LY(CH2C6H4NMe2-o)2 with AlEt3 (4 equiv.) in toluene at -10 °C.

Rare-Earth Metal Phosphinidene Complexes: A Trip from Bridging One to Terminal One

ConspectusAs phosphorus analogues of alkylidene (or carbene) and imido (or nitrene) complexes, phosphinidene complexes have received great attention not only for their fundamental scientific merits but also for their ability to build new phosphorus-containing molecules. A large number of phosphinidene complexes in bridging, mononuclear, or terminal coordination modes have been synthesized, and their reactivity has been extensively explored. However, the synthesis of rare-earth metal (scandium, yttrium, and lanthanide metal) phosphinidene complexes lagged behind the transition metal and actinide congeners for decades. Rare-earth metal ions are among the hardest Lewis acids, whereas phosphinidene ligands are soft Lewis bases; rare-earth metal-phosphinidene coordination is thus mismatched based on the Pearson's HSAB principle. The bridging rare-earth metal phosphinidene complexes were not reported until 2008, and the synthesis of the mononuclear and terminal species is even more challenging, which has only recently been achieved.Our group reported a bis(μ2-phosphinidene)dineodymium complex in 2008. In the following >10 years, we have been pursuing the terminal rare-earth metal phosphinidene complexes. Due to the high instability of rare-earth metal-phosphorus multiple bonds, the synthesis and stabilization of these complexes are extremely difficult. Finally, by using suitable phosphinidene ligands and supporting ligands, we obtained the first mononuclear rare-earth metal phosphinidene complex in 2018 and the first terminal rare-earth metal phosphinidene complex in 2020. In these more than ten years of research, we have also found some interesting reactivity of the rare-earth metal phosphinidene complexes. The rare-earth metal bridging phosphinidene complexes can act as two-electron reductants based on the oxidative coupling of two phosphinidene ligands into a diphosphene ligand. The mononuclear rare-earth metal phosphinidene complexes catalyze the hydrogenation of terminal alkenes under mild conditions, and the joint experimental/DFT studies indicate that the hydrogenation reaction proceeds in a 1,2-addition/elimination mechanism rather than the common σ-bond metathesis mechanism. These reactivities are new and important for the rare-earth metal complexes. In addition, the ligand design in our study may contribute to the synthesis of rare-earth metal-arsenic multiple bonding complexes and alkaline-earth metal-phosphorus multiple bonding complexes, which have not yet been realized. Herein, we present an account of our investigations into rare-earth metal phosphinidene complexes, a trip from bridging one to terminal one. To give the readers an overall image of the development of the rare-earth metal phosphinidene complexes, some findings from other researchers are also included.

A binuclear guanidinate yttrium carbyne complex: unique reactivity toward unsaturated C-N, C-O and C-S bonds

A guanidinato-stabilized binuclear yttrium carbyne complex [(PhCH2)2NC(NC6H3iPr2-2,6)2]2Y2(μ2-Me)(AlMe3)2(μ4-CH) (1) was synthesized via C-H bond activation and its versatile reactivities were investigated. Complex 1 underwent σ-bond metathesis with PhSSPh and nucleophilic addition with PhCN to form the corresponding yttrium thiolate complex 3 and aza-allyl complex 4 respectively. Additionally, the rare yttrium carbide complex 5 was also prepared by treatment of complex 1 with S8. Interestingly, in the reaction with PhNCS, the C[double bond, length as m-dash]S double bond was cleaved, followed by C-H bond activation to give the yttrium sulfide complex 7 with a ketenimine dianion ligand. Unexpectedly, the reaction of complex 1 with CO (1 atm) resulted in deoxygenative coupling of CO, to afford mono- or dioxo-yttrium complexes at different temperatures. The mechanism of the possible formation processes of complexes 3 and 9 was elucidated by DFT calculations.

Activation of CS2 with the 2H-Phosphindole Complex to Construct P,S-Polycycles

The activation of CS₂ by the 2H-phosphindole complex with a low-coordinate phosphadiene moiety is reported. The successive hetero-Diels-Alder reaction between 2H-phosphindoles and CS₂ constructs two bridged rings and one spirocycle simultaneously, affording structurally complex P,S-polycyclic products. The two 2H-phosphindoles approach the C═S bond in a head-to-head disposition to minimize steric hindrance. This work reveals the unique reactivity of low-coordinate organophosphorus species and their potential applications in small molecule activation.

Phosphorus and Arsenic Atom Transfer to Isocyanides to Form π-Backbonding Cyanophosphide and Cyanoarsenide Titanium Complexes

Decarbonylation along with E atom transfer from Na(OCE) (E=P, As) to an isocyanide coordinated to the tetrahedral Ti^II complex [(Tp^tBu,Me )TiCl], yielded the [(Tp^tBu,Me )Ti(η³ -ECNAd)] species (Ad=1-adamantyl, Tp^tBu,Me- =hydrotris(3-tert-butyl-5-methylpyrazol-1-yl)borate). In the case of E=P, the cyanophosphide ligand displays nucleophilic reactivity toward Al(CH₃ )₃ ; moreover, its bent geometry hints to a reduced Ad-NCP^3- resonance contributor. The analogous and rarer mono-substituted cyanoarsenide ligand, Ad-NCAs^3- , shows the same unprecedented coordination mode but with shortening of the N=C bond. As opposed to Ti^II , V^II fails to promote P atom transfer to AdNC, yielding instead [(Tp^tBu,Me )V(OCP)(CNAd)]. Theoretical studies revealed the rare ECNAd moieties to be stabilized by π-backbonding interactions with the former Ti^II ion, and their assembly to most likely involve a concerted E atom transfer between Ti-bound OCE^- to AdNC ligands when studying the reaction coordinate for E=P.

Transition-metal mediated carbon-sulfur bond activation and transformations: an update

Carbon-sulfur bond cross-coupling has become more and more attractive as an alternative protocol to establish carbon-carbon and carbon-heteroatom bonds. Diverse transformations through transition-metal-catalyzed C-S bond activation and cleavage have recently been developed. This review summarizes the advances in transition-metal-catalyzed cross-coupling via carbon-sulfur bond activation and cleavage since late 2012 as an update of the critical review on the same topic published in early 2013 (Chem. Soc. Rev., 2013, 42, 599-621), which is presented by the categories of organosulfur compounds, that is, thioesters, thioethers including heteroaryl, aryl, vinyl, alkyl, and alkynyl sulfides, ketene dithioacetals, sulfoxides including DMSO, sulfones, sulfonyl chlorides, sulfinates, thiocyanates, sulfonium salts, sulfonyl hydrazides, sulfonates, thiophene-based compounds, and C[double bond, length as m-dash]S functionality-bearing compounds such as thioureas, thioamides, and carbon disulfide, as well as the mechanistic insights. An overview of C-S bond cleavage reactions with stoichiometric transition-metal reagents is briefly given. Theoretical studies on the reactivity of carbon-sulfur bonds by DFT calculations are also discussed.

Oxidation and chalcogenylative disproportionation of anionic phosphide ligands in yttrium complexes with elemental sulfur and selenium

The oxidation and disproportionation of anionic phosphide ligands in yttrium complexes with elemental sulfur and selenium are reported. The mixed TpMe2/Cp supported yttrium phosphide complex TpMe2CpYPPh2(THF) (1) reacted with one equiv. of elemental S or Se in THF at room temperature to deliver two structurally characterized yttrium dithio- or monoseleno-phosphinates TpMe2CpYS2PPh2(THF) (2) and TpMe2CpYSePPh2(THF) (4Se), respectively. Further investigations showed that the yttrium thiophosphinate TpMe2CpYSPPh2(THF) (4S) can be isolated from the reactions of 2 and 1 or 1 and elemental S in a short reaction time. Moreover, after keeping 4S or 4Se in THF solution for some days, 2 or [(TpMe2)2Y]+[Se2PPh2]- (5) was obtained by a disproportionation process. The mechanism for the construction of the Ph2PE- and Ph2PE2- (E = S, Se) ligands has been discussed based on the in situ NMR experiments and some designed reactions.

Generation and reactivity of neutral 1,3-benzazaphosphole and anionic 1,3-benzazaphospholide ytterbium(iii) complexes

Treatment of Cp3Ln (Ln = Yb, Y) with 5-R3-6-R1-2-R2-1H-1,3-benzazaphosphole (HBp) (HBp1 (1a): R1 = H, R2 = 2,4,6-Me3C6H2, R3 = Me; HBp2(1b): R1 = Me, R2 = C6H5, R3 = H; HBp3(1c): R1 = R3 = H, R2 = C6H5) at room temperature gives the crystalline 1 : 1 Lewis acid-base adducts [(η1(p)-HBp)LnCp3] (2a-d) [Ln = Yb: Bp = Bp1 (2a), Bp2 (2b), Bp3 (2c); Ln = Y: Bp2 (2d)] with Ln-P donor bonds in good yields. Heating 2a-c in toluene leads to the liberation of one molecule of CpH to afford the corresponding N-bonded complexes [Cp2YbBp] (Bp = Bp1 (3a), Bp2 (3b), Bp3 (3c)). Interestingly, the P atom of complexes 3a-c can also be further coordinated to another Lewis acid such as Cp3Yb and B(C6F5)3 to give the adducts [Cp2Yb(μ-η1(N):η2(C,C):η1(P)-Bp)YbCp3] (Bp = Bp1 (4a), Bp2 (4b), Bp3 (4c)) and [Cp2Yb(μ-η1(N):η2(C,C):η1(P)-Bp)B(C6F5)3] (Bp = Bp1 (5a), Bp2 (5b), Bp3 (5c)), respectively. The molecular structures of complexes 2a, 4b-4c and 5c are confirmed by X-ray diffraction analysis.