Water Dynamics in Polyacrylamide Hydrogels

Effect of polymerization on free water in polyacrylamide hydrogels observed with Brillouin spectroscopy

Brillouin spectroscopy is used to determine the effects of polymer concentration, crosslinking density, and polymerization on the longitudinal storage and loss moduli of polyacrylamide hydrogels. The model established by Chiarelli et al. is implemented to calculate the speed of sound in the free water [Chiarelli et al., The Journal of the Acoustical Society of America, 2010, 127(3), 1197-1207]. The polymer concentration has the greatest effect on the moduli of the polymer matrix. We determined that the crosslink density has no measurable effect on the logitudinal storage or loss modulus of polyacrylamide hydrogels when measurements are made at GHz frequencies, in contrast to measurements made at kHz frequencies as documented by other studies. However, the moduli are independent of monomer concentration if the acrylamide is not polymerized. We show at the GHz frequency that the incorporation of acrylamide polymer chains affects the mechanical properties of the free water. The speed of sound in the free water is reduced by the introduction of polymerized acrylamide. The long polymer chains and their interactions with the bounded water disrupt the bonding organization of the unbound water, causing a reduction of the average hydrogen bond strength between free water molecules. This results in a decreased speed of sound in the free water and an increase in the longitudinal storage modulus of the hydrogel.

Terahertz Spectroscopic Insight into the Hydrogelation of Copper Ion-Coordinated Poly(vinyl alcohol)

Metal-coordinated hydrogels are becoming increasingly popular in the biomedical field due to their unique properties. However, the mechanism behind gel forming involving metal ions is not yet fully understood. In this work, terahertz spectroscopy was used to investigate the role of interfacial water in the gelation process of copper ion-coordinated poly(vinyl alcohol) hydrogels. The results showed that the binding of copper ions could alter the interfacial hydration dynamics of the poly(vinyl alcohol) polymers. Combined with the results of differential scanning calorimetry (DSC), we propose a possible hydration layer-mediated mechanism for the formation of cooper ion-coordinated hydrogel during the freeze-thaw cycle. These results highlight the value of terahertz spectroscopy as a sensor for studying the hydration process in hydrogels and provide an important clue for understanding the mechanism of hydrogelation in ion-coordinated hydrogels.

Selective and Controlled Release Responsive Nanoparticles with Adsorption-Pairing Synergy for Anthocyanin Extraction

Anthocyanins with different structures have different anti-inflammatory and anti-cancer properties. Precise structural use can improve the chemopreventive effects of anthocyanins and enhance treatment outcomes because the anthocyanin structure influences its functional sites and activities. However, owing to the available variety of anthocyanins and their complex structures, the low matching of intermolecular forces between existing adsorbents and anthocyanins limits the targeted separation of anthocyanin monomers. Short-range and efficient selective binding, which is difficult to achieve, is the current focus in the extraction field. We here developed self-assembled Fe3O4-based nano adsorbers with different surface modifications based on adsorption-pairing synergy. The electrostatic force, coordination bond, hydrogen bond, and π-π* bond together induced selective adsorption between Fe3O4 nanoparticles and anthocyanin molecules. An acid-release solution disrupted the polarity balance in the aforementioned association system, thereby promoting the controlled release of anthocyanins. Among the candidates, the effects of morphology, particle size, surface charge, and functional group on adsorption performance were analyzed. The polyacrylamide-modified magnetic Fe3O4 nanoparticles were found to be favorable for selectively extracting anthocyanin, with an adsorption capacity of 19.74 ± 0.07 mg g-1. The release percentage of cyanidin-3-O-glucoside reached up to 98.6% ± 1.4%. This study offers a scientific basis for developing feasible nanotechniques to extract anthocyanins and plant active substances.

Water-in-Salt: Fast Dynamics, Structure, Thermodynamics, and Bulk Properties

We present concentration-dependent dynamics of highly concentrated LiBr solutions and LiCl temperature-dependent dynamics for two high concentrations and compare the results to those of prior LiCl concentration-dependent data. The dynamical data are obtained using ultrafast optical heterodyne-detected optical Kerr effect (OHD-OKE). The OHD-OKE decays are composed of two pairs of biexponentials, i.e., tetra-exponentials. The fastest decay (t1) is the same as pure water's at all concentrations within error, while the second component (t2) slows slightly with concentration. The slower components (t3 and t4), not present in pure water, slow substantially, and their contributions to the decays increase significantly with increasing concentration, similar to LiCl solutions. Simulations of LiCl solutions from the literature show that the slow components arise from large ion/water clusters, while the fast components are from ion/water structures that are not part of large clusters. Temperature-dependent studies (15-95 °C) of two high LiCl concentrations show that decreasing the temperature is equivalent to increasing the room temperature concentration. The LiBr and LiCl concentration dependences and the two LiCl concentrations' temperature dependences all have bulk viscosities that are linearly dependent on τcslow, the correlation time of the slow dynamics (weighted averages of t3 and t4). Remarkably, all four viscosity vs 1/τCslow plots fall on the same line. Application of transition state theory to the temperature-dependent data yields the activation enthalpies and entropies for the dynamics of the large ion/water clusters, which underpin the bulk viscosity.

Surprising Nanomechanical and Conformational Transition of Neutral Polyacrylamide in Monovalent Saline Solutions

Polyacrylamide (PAM) is one of the most important water-soluble polymers that has been extensively applied in water treatment, drug delivery, and flexible electronic devices. The basic properties, e.g., microstructure, nanomechanics, and solubility, are deeply involved in the performance of PAM materials. Current research has paid more attention to the development and expansion of the macroscopic properties of PAM materials, and the study of the mechanism involved with the roles of water and ions on the properties of PAM is insufficient, especially for the behaviors of neutral amide side groups. In this study, single molecule force spectroscopy was combined with molecular dynamic (MD) simulations, atomic force microscope imaging, and dynamic light scattering to investigate the effects of monovalent ions on the nanomechanics and molecular conformations of neutral PAM (NPAM). These results show that the single-molecule elasticity and conformation of NPAM exhibit huge variation in different monovalent salt solutions. NPAM adopts an extended conformation in aqueous solutions of strong hydrated ion (acetate), while transforms into a collapse globule in the existence of weakly hydrated ion (SCN-). It is believed that the competition between intramolecular and intermolecular weak interactions plays a key role to adjust the molecular conformation and elasticity of NPAM. The competition can be largely influenced by the type of monovalent ions through hydration or a chaotropic effect. Methods utilized in this study provide a means to better understand the Hofmeister effect of ions on other macromolecules containing amide groups at the single-molecule level.

Superhydrophilic CoFe Dispersion of Hydrogel Electrocatalysts for Quasi-Solid-State Photoelectrochemical Water Splitting

Photoelectrochemical (PEC) water splitting is an attractive strategy to convert solar energy to hydrogen. However, the lifetime of PEC devices is restricted by the photocorrosion of semiconductors and the instability of co-catalysts. Herein, we report a feasible in situ inherent cross-linking method for stabilizing semiconductors that uses a CoFe-dispersed polyacrylamide (PAM) hydrogel as a transparent protector. The CoFe-PAM hydrogel protected BiVO4 (BVO) photoanode reached a photocurrent density of 5.7 mA cm-2 at 1.23 VRHE under AM 1.5G illumination with good stability. The PAM hydrogel network improved the loading of Fe sites while enabling the retention of more CoFe co-catalysts and increasing the electron density of the reaction active sites, further improving the PEC performance and stability. More importantly, by tuning the polymerization network, we pioneer the use of quasi-solid-state electrolytes in photoelectrochemistry, where the high concentration of ionic solvent in the PAM hydrogel ensures effective charge transport and good water storage owing to the hydrophilic and porous structure of the hydrogel. This work expands the scope of PEC research by providing a class of three-dimensional hydrogel electrocatalysts and quasi-solid-state electrolytes with huge extension potential, and the versatility of these quasi-solid-state electrolytes can be employed for other semiconductors.

Transparent tissue in solid state for solvent-free and antifade 3D imaging

Optical clearing with high-refractive-index (high-n) reagents is essential for 3D tissue imaging. However, the current liquid-based clearing condition and dye environment suffer from solvent evaporation and photobleaching, causing difficulties in maintaining the tissue optical and fluorescent features. Here, using the Gladstone-Dale equation [(n-1)/density=constant] as a design concept, we develop a solid (solvent-free) high-n acrylamide-based copolymer to embed mouse and human tissues for clearing and imaging. In the solid state, the fluorescent dye-labeled tissue matrices are filled and packed with the high-n copolymer, minimizing scattering in in-depth imaging and dye fading. This transparent, liquid-free condition provides a friendly tissue and cellular environment to facilitate high/super-resolution 3D imaging, preservation, transfer, and sharing among laboratories to investigate the morphologies of interest in experimental and clinical conditions.

Dynamics of Concentrated Aqueous Lithium Chloride Solutions Investigated with Optical Kerr Effect Experiments

We report the dynamics of concentrated lithium chloride aqueous solutions over a range of moderate to high concentrations. Concentrations (1-29 to 1-3.3 LiCl-water) were studied in which, at the highest concentrations, there are far too few water molecules to solvate the ions. The measurements were made with optically heterodyne-detected optical Kerr effect experiments, a non-resonant technique able to observe dynamics over a wide range of time scales and signal amplitudes. While the pure water decay is a biexponential, the LiCl-water decays are tetra-exponentials at all concentrations. The faster two decays arise from water dynamics, while the slower two decays reflect the dynamics of the ion-water network. The fastest decay (t₁) is the same as pure water at all concentrations. The second decay (t₂) is also the same as that of pure water at the lower concentrations, and then, it slows with increasing concentration. The slower dynamics (t₃ and t₄), which do not have counterparts in pure water, arise from ion-water complexes and, at the highest concentrations, an extended ion-water network. Comparisons are made between the concentration dependence of the observed dynamics and simulations of structural changes from the literature, which enable the assignment of dynamics to specific ion-water structures. The concentration dependences of the bulk viscosity and the ion-water network dynamics are directly correlated. The correlation provides an atomistic-level understanding of the viscosity.

Dynamics of Acrylamide Hydrogels, Polymers, and Monomers in Water Measured with Optical Heterodyne-Detected Optical Kerr Effect Spectroscopy

The ultrafast dynamics of acrylamide monomers (AAm), polyacrylamide (PAAm), and polyacrylamide hydrogels (PAAm-HG) in water were studied using optical heterodyne-detected optical Kerr effect (OHD-OKE) spectroscopy. Previous ultrafast infrared (IR) measurements of the water dynamics showed that at the same concentration of the acrylamide moiety, AAm, PAAm, and PAAm-HG exhibited identical water dynamics and that these dynamics slowed with increasing concentration. In contrast to the IR measurements, OHD-OKE experiments measure the dynamics of both the water and the acrylamide species, which occur on different time scales. In this study, the dynamics of all the acrylamide systems slowed with increasing concentration. We found that AAm exhibits tetraexponential decays, the longest component of which followed Debye-Stokes-Einstein behavior except for the highest concentration, 40% (w/v). Low concentrations of PAAm followed a single power law decay, while high concentrations of PAAm and all concentrations of PAAm-HG decayed with two power laws. The highest concentrations, 25% and 40%, of PAAm and PAAm-HG showed nearly identical dynamics. We interpreted this result as reflecting a similar extent of chain-chain interactions. At low concentrations, PAAm displays non-Markovian, single-chain dynamics (single power law), but PAAm displays entangled chain-chain interactions at high concentrations (two power laws). PAAm-HG has chain-chain interactions at all concentrations that arise from the cross-linking. At high concentrations, the dynamics of the entangled of PAAm become identical within error as those of the cross-linked PAAm-HG.

A Trilaminar-Thermosensitive Hydrogel Catalytic Reactor Capable of Single/Tandem Catalytic Switchable Ability

The present endeavor is to develop a highly-intelligent catalytic reactor prototype which is able to autonomously adapt to the environment and provides an in-situ double-shift catalytic ability. By seeking inspiration from nature, this objective is achieved by developing a self-adaptive hydrogel catalytic reactor which held a catalytic trilaminar structure capable of reverse thermosensitive properties. With increasing temperatures, the catalytic tri-layers of this catalytic reactor would function in a sequential way (i.e., one negative temperature response layer, one support layer and one positive temperature response layer) and as a result, led to the single-tandem double-shift catalytic ability. This catalytic reactor individually presented single/tandem catalytic process at relatively low temperatures or high temperatures through the cooperative work of the three layers. In this way, this catalytic reactor showed the single-tandem controllable catalytic ability. The novel protocol not only provides a new solution to complicated catalytic processes but also inspires the further application of smart polymers in a broader spectrum of areas.

Distinct Hydrogen Bonding Dynamics Underlies the Microheterogeneity in DMF-Water Mixtures

The hydrogen bonding interaction between the amide functional group and water is fundamental to understanding the liquid-liquid heterogeneity in biological systems. Herein, the structure and dynamics of the N,N-dimethylformamide (DMF)-water mixtures have been investigated by linear and nonlinear IR spectroscopies, using the hydroxyl stretch and extrinsic probe of thiocyanate as local vibrational reporters. According to vibrational relaxation dynamics measurements, the orientational dynamics of water is not directly tied to those of DMF molecules. Wobbling-in-a-cone analysis demonstrates that the water molecules have varying degrees of angular restriction depending on their composition due to the formation of specific water-DMF networks. Because of the preferential solvation by DMF molecules, the rotational dynamics of the extrinsic probe is slowed significantly, and its rotational time constants are correlated to the change of solution viscosity. The unique structural dynamics observed in the DMF-water mixtures is expected to provide important insights into the underlying mechanism of microscopic heterogeneity in binary mixtures.

Hydrogels Enable Future Smart Batteries

The growing trend of intelligent devices ranging from wearables and soft robots to artificial intelligence has set a high demand for smart batteries. Hydrogels provide opportunities for smart batteries to self-adjust their functions according to the operation conditions. Despite the progress in hydrogel-based smart batteries, a gap remains between the designable functions of diverse hydrogels and the expected performance of batteries. In this Perspective, we first briefly introduce the fundamentals of hydrogels, including formation, structure, and characteristics of the internal water and ions. Batteries that operate under unusual mechanical and temperature conditions enabled by hydrogels are highlighted. Challenges and opportunities for further development of hydrogels are outlined to propose future research in smart batteries toward all-climate power sources and intelligent wearables.

Water Dynamics in Aqueous Poly-N-Isopropylacrylamide Below and Through the Lower Critical Solution Temperature

Poly-N-isopropylacrylamide (PNIPAM) is a thermo-responsive polymer that exhibits a reversible structural change from extended chains to aggregates in aqueous solution above its lower critical solution temperature (LCST). Using polarization-selective IR pump-probe spectroscopy, the water orientational dynamics in PNIPAM from below to above the LCST were examined and compared to those of its monomer solution, N-isopropylacrylamide (NIPAM), polyacrylamide, and an acrylamide monomer solution, which are not thermo-responsive. The OD stretch of dilute HOD in H₂O is used as a vibrational probe of water orientational dynamics. Below the LCST of the polymer, NIPAM and PNIPAM solutions exhibited identical water dynamics that were significantly different from those of bulk water, containing both faster and slower components due to solute-water interactions. Therefore, there is no difference in the nature of water interactions with a single NIPAM moiety and a long polymer chain. For all systems, including PNIPAM below and above the LCST, the orientational dynamics were modeled with a bulk water component and a polymer/monomer-associated component based on previous experimental and computational findings. Above the LCST, PNIPAM showed fast water orientational relaxation but much slower long-time dynamics compared to those of NIPAM. The slow component in PNIPAM, which was too slow to be accurately measured due to the limited OD vibrational lifetime, is ascribed to water confined in small voids (<2 nm in diameter) of PNIPAM globules. These results highlight important details about thermo-responsive polymers and the dynamics of their solvation water as they undergo a significant structural change.

Biomimetic virus-based soft niche for ischemic diseases

The essential therapeutic cues provided by a nanofibrous arginine-glycine-aspartic acid-engineered M13 phage were exploited as extracellular matrix (ECM)-mimicking niches, contributing to de novo soft tissue niche engineering. The interplay of biomimetic phage cues with surrounding organ tissues was identified, and cells were implanted between tissues to achieve an appropriate soft tissue niche that enables the proper functioning of the implanted stem cells at the injured site. With the polyacrylamide (PA) hydrogel mimicking the soft tissue organ stiffness ranges, it was found that biochemical and topological cues in conjunction with the ∼1-2 kPa elastic and mechanical cues of engineered phage nanofibers in soft tissues efficiently enhance the desired response of implanted stem cells. This phage cue with angiogenic and antioxidant functions overcomes the pathological environment to support implanted cells and surrounding soft tissues at the ischemic site, thereby successfully decreasing myogenic degeneration, minimizing fibrosis, and enhancing blood vessel regeneration with M2 macrophage polarization by improving the survival of the implanted endothelial progenitor cells (EPC) in an ischemic mouse model. These biomimetic phage nanofiber cues are considerably supportive of cell therapy, as they establish promising therapeutic extracellular de novo soft tissue niches for curing ischemic diseases.

Analyzing the Water Confined in Hydrogel Using Near-Infrared Spectroscopy

Analysis of the confined water in hydrogels is essential for understanding the chemical and physical properties. Methods to quantify the content and study the structure of water in hydrogel using near-infrared (NIR) spectroscopy were proposed. The NIR spectra of poly-N,N-dimethylacrylamide (PDMAA) hydrogel with different water contents were measured at different temperatures. A partial least squares (PLS) model was established using the spectra of the samples with water content (w_h) from 0.9 to 387.6%. Continuous wavelet transform (CWT) was adopted to calculate the resolution enhanced spectra from which the spectral features of water species with free OH (S₀) and with one or two hydrogen bonds (S₁ and S₂) was obtained. The variation of these water species with water content suggests the existence of the water molecules bonding to NH groups by one hydrogen bond (S_1NH) and hydrating the CH groups of the polymer network and bulk-like water. Moreover, the variation of water structures with temperature shows that the release of bulk-like water occurs in the phase transition of the hydrogel, but the S_1NH and the hydration water stay unchanged. The former explains the sudden volume shrinkage for the phase transition and the latter may be the reason for the shape memory effect in the repeated swelling and deswelling of hydrogels.

Cone cracks in tissue-mimicking hydrogels during hypodermic needle insertion: the role of water content

Needle insertion into soft biological tissues is a common process in various surgical procedures. During insertion, soft biological tissues with different water contents undergo large deformation often leading to uncontrollable cracks and tissue damage. Despite the numerous experimental studies and numerical modelling of needle-tissue interaction, the results do not show any consistency mainly due to the heterogeneity of tissue properties and opaqueness. In this context, understanding the fracture behaviour of soft tissues during needle insertion is important for minimally invasive surgeries and other medical procedures. Recently, we showed that the needle insertion into a transparent, tissue-mimicking polyacrylamide (PAAm) hydrogel causes periodic cone cracks. In this work, we systematically varied the water content of the PAAm hydrogel in the preparation state and performed needle insertion experiments using a hypodermic needle at a constant velocity to study the fracture characteristics of the PAAm hydrogel. The results show that the number of peaks, the magnitudes of the insertion forces, and corresponding cone cracks decrease with increasing water content. Furthermore, we discussed the influence of water on cone crack fracture characteristics, cone angle, periodicity, crack speed and fracture energy release rate. These results provide a better understanding of the fracture processes of soft tissues with different water concentrations such as the lung, liver, and brain during needle insertion and the control of tissue damage during needle insertion involved in medical procedures.

Eu3+- and Tb3+-Based Coordination Complexes of Poly(N-Isopropyl,N-methylacrylamide-stat-N,N-dimethylacrylamide) Copolymer: Synthesis, Characterization and Property

This contribution reports the syntheses, structural analyses and properties of europium (Eu³⁺)- and terbium (Tb³⁺)-based coordination complexes of poly(N-isopropyl,N-methylacrylamide-stat-N,N-dimethylacrylamide) (poly(iPMAm-stat-DMAm)) copolymer, named as poly-Eu(III) and poly-Tb(III), respectively. In greater detail, poly(iPMAm₈₅-stat-DMAm₁₅) is first prepared by random copolymerization of N-isopropyl,N-methylacrylamide (iPMAm) and N,N-dimethylacrylamide (DMAm) via group transfer polymerization (GTP). Next, poly(iPMAm₈₅-stat-DMAm₁₅) is used as the polymer matrix for chelating with Eu³⁺ and Tb³⁺ cations at its side amide groups, to produce poly-Eu(III) and poly-Tb(III). Their structural characterizations by FT-IR spectroscopy and XPS confirm the formation of polymeric complexes. The study on their fluorescence emission characteristics and luminescence lifetime demonstrates that Poly-Eu(III) shows four strong emission peaks at 578, 593, 622, and 651 nm, which are responsible for the electron transitions from the excited ⁵D₀ state to the multiplet ⁷F_J (J = 0, 1, 2, 3) states, respectively, and poly-Tb(III) also displays four emission peaks at 489, 545, 588, and 654 nm, mainly due to the electron transitions of ⁵D₄ → ⁷F_i (i = 6, 5, 4, 3). The luminescence lifetimes of poly-Eu(III) (τ_poly-Eu(III)) and poly-Tb(III) (τ_poly-Tb(III)) are determined to be 4.57 and 7.50 ms, respectively. In addition, in aqueous solutions, poly-Eu(III) and poly-Tb(III) are found to exhibit thermoresponsivity, with their cloud temperatures (T_cs) locating around 36.4 and 36.8 °C, respectively. Finally, the cytotoxicity study on the human colon carcinoma cells LoVo and DLD1 suggests that the luminescent Eu³⁺ and Tb³⁺ in the chelated state with poly(iPMAm-stat-DMAm) show much better biocompatibility and lower toxicity than their inorganic salts.

Systematic Evaluation of Ion Diffusion and Water Exchange

As a fundamental property of all fluids, diffusion plays myriad roles in both science and our daily lives. Diffusive properties of many liquids including water have been extensively studied both experimentally and theoretically, while for transition metal ions, there exist significant experimental data that have not been extensively studied theoretically. Hence, high-confidence predictions for challenging systems like radioactive ions that are biohazardous cannot be reliably generated. In this work, a workflow named ISAIAH (Ion Simulation using AMBER for dIffusion Action when Hydrated) was designed to accurately simulate the diffusion coefficients of 15 monoatomic ions with charges varying from -1 to +3 in four water models. As the results indicate, good agreement with experimental values was achieved, leading us to select ²³⁹Pu⁴⁺ (for which no experimental data are available) as a candidate ion to make a theoretical prediction of its diffusion coefficient in water. Among all the force field parameter sets, the ones parametrized using an augmented 12-6-4 Lennard-Jones (LJ) potential showed lower average unsigned errors (AUE) for ions of various radii and electron configurations relative to some 12-6 LJ parameters. This observation agrees well with the fact that diffusion is affected by both the hydration free energy (HFE) and the ion-oxygen distance (IOD) between solute and solvent molecules, both of which are handled well by the 12-6-4 model.

High-Strength and Injectable Supramolecular Hydrogel Self-Assembled by Monomeric Nucleoside for Tooth-Extraction Wound Healing

Hydrogels with high mechanical strength and injectability have attracted extensive attention in biomedical and tissue engineering. However, endowing a hydrogel with both properties is challenging because they are generally inversely related. In this work, by constructing a multi-hydrogen-bonding system, a high-strength and injectable supramolecular hydrogel is successfully fabricated. It is constructed by the self-assembly of a monomeric nucleoside molecular gelator (2-amino-2'-fluoro-2'-deoxyadenosine (2-FA)) with distilled water/phosphate buffered saline as solvent. Its storage modulus reaches 1 MPa at a concentration of 5.0 wt%, which is the strongest supramolecular hydrogel comprising an ultralow-molecular-weight (MW < 300) gelator. Furthermore, it exhibits excellent shear-thinning injectability, and completes the sol-gel transition in seconds after injection at 37 °C. The multi-hydrogen-bonding system is essentially based on the synergistic interactions between the double NH₂ groups, water molecules, and 2'-F atoms. Furthermore, the 2-FA hydrogel exhibits excellent biocompatibility and antibacterial activity. When applied to rat molar extraction sockets, compared to natural healing and the commercial hemorrhage agent gelatin sponge, the 2-FA hydrogel exhibits faster degradation and induces less osteoclastic activity and inflammatory infiltration, resulting in more complete bone healing. In summary, this study provides ideas for proposing a multifunctional, high-strength, and injectable supramolecular hydrogel for various biomedical engineering applications.

An Overview on Recent Progress of the Hydrogels: From Material Resources, Properties to Functional Applications

Hydrogels, as the most typical elastomer materials with three-dimensional network structures, have attracted wide attention owing to their outstanding features in fields of sensitive stimulus response, low surface friction coefficient, good flexibility and bio-compatibility. Because of numerous fresh polymer materials (or polymerization monomers), hydrogels with various structure diversities and excellent properties are emerging, and the development of hydrogels is very vigorous over the past decade. This review focuses on state-of-the-art advances, systematically reviews the recent progress on construction of novel hydrogels utilized several kinds of typical polymerization monomers, and explores the main chemical and physical cross-linking methods to develop the diversity of hydrogels. Following the aspects mentioned above, the classification and emerging applications of hydrogels, such as pH response, ionic response, electrical response, thermal response, biomolecular response, and gas response, are extensively summarized. Finally, we have done this review with the promises and challenges for the future evolution of hydrogels and their biological applications. cross-linking methods; functional applications; hydrogels; material resources This article is protected by copyright. All rights reserved.

Adsorbed Water Structure on Acrylate-Based Biocompatible Polymer Surface

The role of water in the excellent biocompatibility of the acrylate-based polymers widely used for antibiofouling coating material has been realized previously. Here, we report femtosecond mid-infrared pump-probe spectroscopy of the OD stretch band of HOD molecule adsorbed on highly biocompatible poly(2-methoxyethyl) acrylate [PMEA] and poorly biocompatible poly(2-phenoxyethyl) acrylate [PPEA], both of which reveal that there are two water species with significantly different vibrational lifetime. PMEA interacts more strongly with water than PPEA through the H-bonding interaction between carbonyl (C═O) and water. The vibrational lifetime of the OD stretch in PPEA is notably longer by factors of 3 and 7 than those in PMEA and bulk water, respectively. The IR-pump visible-probe photothermal imaging further unravels substantial spatial overlap between polymer CO group and water for hydrated PMEA and a significant difference in surface morphology than those in PPEA, which exhibits the underlying relationships among polymer-water interaction, surface morphology, and biocompatibility.

Identical Water Dynamics in Acrylamide Hydrogels, Polymers, and Monomers in Solution: Ultrafast IR Spectroscopy and Molecular Dynamics Simulations

The dynamics and structure of water in polyacrylamide hydrogels (PAAm-HG), polyacrylamide, and acrylamide solutions are investigated using ultrafast infrared experiments on the OD stretch of dilute HOD/H₂O and molecular dynamics simulations. The amide moiety of the monomer/polymers interacts strongly with water through hydrogen bonding (H-bonding). The FT-IR spectra of the three systems indicate that the range of H-bond strengths is relatively unchanged from bulk water. Vibrational population relaxation measurements show that the amide/water H-bonds are somewhat weaker but fall within the range of water/water H-bond strengths. A previous study of water dynamics in PAAm-HG suggested that the slowing observed was due to increasing confinement with concentration. Here, for the same concentrations of the amide moiety, the experimental results demonstrate that the reorientational dynamics (infrared pump-probe experiments) and structural dynamics (two-dimensional infrared spectroscopy) are identical in the three acrylamide systems studied. Molecular dynamics simulations of the water orientational relaxation in aqueous solutions of the acrylamide monomer, trimer, and pentamer are in good agreement with the experimental results and are essentially chain length independent. The simulations show that there is a slower, low-amplitude (<7%) decay component not accessible by the experiments. The simulations examine the dynamics and structure of water H-bonded to acrylamide, in the first solvent shell, and beyond for acrylamide monomers and short chains. The experiments and simulations show that the slowing of water dynamics in PAAm-HG is not caused by confinement in the polymer network but rather by interactions with individual acrylamide moieties.

Charge-Gradient Hydrogels Enable Direct Zero Liquid Discharge for Hypersaline Wastewater Management

Zero liquid discharge (ZLD), which maximizes water recovery and eliminates environmental impact, is an urgent wastewater management strategy for alleviating freshwater shortage. However, because of the high concentration of salts and broad-spectrum foulants in wastewater, a huge challenge for ZLD is lack of a robust membrane-based desalination technology that enables direct wastewater recovery without costly pretreatment processes. Here, a paradigm-shift membrane distillation (MD) strategy is presented, wherein the traditional hydrophobic porous membrane is replaced with a hydrophilic nonporous charge-gradient hydrogel (CGH) membrane that possesses hypersaline tolerance, fouling/scaling-free properties, and negligible vapor transfer resistance inside the membrane, simultaneously. Therefore, the CGH-based MD with high water flux enables direct desalination of hypersaline wastewater (130 g L^-1 ) containing broad-spectrum foulants (500 mg L^-1 ) during continuous long-term operation (200 h), and this technology paves a promising way to direct ZLD for wastewater management.

Bursting the bubble: A molecular understanding of surfactant-water interfaces

Surfactant science has historically emphasized bulk, thermodynamic measurements to understand the microemulsion properties of greatest industrial significance, such as interfacial tensions, phase behavior, and thermal stability. Recently, interest in the molecular properties of surfactants has grown among the physical chemistry community. This has led to the application of cutting-edge spectroscopic methods and advanced simulations to understand the specific interactions that give rise to the previously studied bulk characteristics. In this Perspective, we catalog key findings that describe the surfactant-oil and surfactant-water interfaces in molecular detail. We emphasize the role of ultrafast spectroscopic methods, including two-dimensional infrared spectroscopy and sum-frequency-generation spectroscopy, in conjunction with molecular dynamics simulations, and the role these techniques have played in advancing our understanding of interfacial properties in surfactant microemulsions.

Confined Water Molecules in Binary Mixtures of Water and 2,6-Lutidine Near Lower Solution Critical Temperature

We study the concentration and temperature dependence of the reorientation dynamics of water molecules in binary mixtures of water and 2,6-lutidine below the lower solution critical temperature (LSCT) with femtosecond mid-infrared pump–probe spectroscopy. The measurements reveal the presence of water molecules interacting with both the hydrophobic groups of lutidine and forming a hydrogen bond with the nitrogen atom of lutidine. Both types of molecules show a strongly decreased rotational mobility in comparison to bulk water. From the temperature dependence of the slow water fraction, we conclude that the lutidine molecules form clusters that decrease in size when the temperature is decreased further below the LSCT.

Nano-FeS incorporated into stable lignin hydrogel: A novel strategy for cadmium removal from soil

Strategies for reducing cadmium (Cd) content in polluted farmland soils are currently limited. A type of composite with nanoparticles incorporated into a hydrogel have been developed to efficiently remove heavy metals from sewage, but their application in soils faces challenges, such as organic hydrogel degradation due to oxygen exposure and slow Cd²⁺ release from soil constituents. To overcome these challenges, a composite with superior stability for long-term application in soil is required. In this study, ferrous sulfide (FeS) nanoparticle@lignin hydrogel composites were developed. The lignin-based hydrogels inherited lignin's natural mechanical and environmental stability and the FeS nanoparticles efficiently adsorbed Cd²⁺ and enhanced Cd²⁺ desorption from soils by producing H⁺. The high sorption capacity (833.3 g kg^-1) of the composite was attributed to four proposed mechanisms, including cadmium sulfide (CdS) precipitation via chemical reaction (84.06%), lignin complexation (13.19%), hydrogel swelling (0.61%), and nanoparticle sorption (2.15%). In addition, Fe²⁺ displaced from the composite was gradually oxidized to form solid iron oxide hydroxide, which increased Cd²⁺ sorption. The composite significantly reduced the total, surfactant-soluble, and fixed Cd in heavily and lightly polluted paddy soils by 22.4-49.6%, 13.5-68.6%, and 40.1-16.6%, respectively, in 7 days.

Understanding the complexity of the structures in alcohol solutions by temperature-dependent near-infrared spectroscopy

For understanding the structures and the hydrogen bonding in alcohol solutions, the changes of the structures and hydrogen bonding with temperature were studied by temperature-dependent near-infrared (NIR) spectroscopy. The spectral features of eight alcohol species including the monomer, dimer and linear or cyclic aggregates (trimer, tetramer and polymer) were found from the resolution-enhanced spectra calculated by continuous wavelet transform. The changes of the eight species with concentration and temperature were analyzed using the intensity variation of the corresponding spectral features and two-dimensional correlation NIR spectroscopy. The aggregates were found to form at a very low concentration and the stability of the seven aggregates with temperature was found in an order of cyclic tetramer > linear polymer > linear tetramer > cyclic trimer > linear trimer > cyclic polymer > dimer. Furthermore, the formation of the aggregates was found to be affected by the chain length. The increase of the chain length is beneficial for the formation of cyclic tetramer and polymer due to the hydrophobic effect, but is an adverse effect for the formation of linear polymer.

Bulk-like and Interfacial Water Dynamics in Nafion Fuel Cell Membranes Investigated with Ultrafast Nonlinear IR Spectroscopy

The water confined in the hydrophilic domains of Nafion fuel cell membranes is central to its primary function of ion transport. Water dynamics are intimately linked to proton transfer and are sensitive to the structural features and length scales of confinement. Here, ultrafast polarization-selective pump-probe and two-dimensional infrared vibrational echo (2D IR) experiments were performed on fully hydrated Nafion membranes with sodium counterions to explicate the water dynamics. Like aerosol-OT reverse micelles (AOT RMs), the water dynamics in Nafion are attributed to bulk-like core water in the central region of the hydrophilic domains and much slower interfacial water. Population and orientational dynamics of water in Nafion are slowed by polymer confinement. Comparison of the observed dynamics to those of AOT RMs helps identify local interactions between water and sulfonate anions at the interface and among water molecules in the core. This comparison also demonstrates that the well-known spherical cluster morphology of Nafion is not appropriate. Spectral diffusion of the interfacial water, which arises from structural dynamics, was obtained from the 2D IR experiments taking the core water to have dynamics similar to bulk water. Like the orientational dynamics, spectral diffusion was found to be much slower at the interface compared to bulk water. Together, the dynamics indicate slow reorganization of weakly hydrogen-bonded water molecules at the interface of Nafion. These results provide insights into proton transport mechanisms in fuel cell membranes, and more generally, water dynamics near the interface of confining systems.

Hydrophobic pattern of alkylated ureas markedly affects water rotation and hydrogen bond dynamics in aqueous solution

Alkylated ureas are frequently used amphiphiles to mediate biomolecule water interactions, yet their hydrophobic substitution pattern critically affects their function. These differences can be traced back to their hydration, which is poorly understood. Here, we investigate subtle effects of the hydrophobic pattern of ureas on hydration dynamics using a combination of linear and non-linear infrared spectroscopies on the OD stretching vibration of HDO. Isomeric 1,3-dimethylurea (1,3-DMU), 1,1-dimethylurea (1,1-DMU) and 1-ethylurea (1-EU) exhibit very similar and rather weak modulation of the water hydrogen-bond strength distribution. Yet, only 1,3-DMU and 1,1-DMU enhance the hydrogen-bond heterogeneity and slow-down its fluctuation dynamics. In turn, rotational dynamics of water molecules, which is dominated by hydrogen bond switches, is significantly impeded in the presence of 1,3-DMU and only weakly by 1,1-DMU and 1-EU. These marked differences can be explained by both excluded volume effects in hydration and self-aggregation, which may be the key to their biotechnological function.

Integrating Target-Responsive Hydrogels with Smartphone for On-Site ppb-Level Quantitation of Organophosphate Pesticides

Precise on-site profiling of organophosphate pesticides (OPs) is of significant importance for monitoring pollution and estimating poisoning. Herein, we designed a simple and convenient portable kit based on Ag⁺-responsive hydrogels for accurate detection of OPs. The newly developed hydrogels employed o-phenylenediamine (OPD) and silicon quantum dots (SiQDs) as indicator, which possessed ratiometric response. In this sensor, OPs as inhibitor of acetylcholinesterase prevented the generation of thiocholine, which blocked the formation of metal-polymer with Ag⁺, further triggered the oxidation of OPD to yield yellow 2,3-diaminophenazine (DAP) with fluorescence emission at 557 nm. The fluorescence intensity of SiQDs (444 nm) was quenched by DAP through inner filter effect (IFE) process, emerging a typical ratiometric response. Interestingly, the ratiometric signal of kit, which was recorded by smartphone's camera, can be transduced by ImageJ software into the hue parameter that was linearly proportional to the concentration of OPs. The simplicity of portable kit combined with smartphone operation, which possessed high sensitivity (detection limit <10 ng mL^-1) and rapid sample-to-answer detection time (45 min) in agricultural sample, indicating that the methodology offered a new sight for portable monitoring of food safety and human health.

Ultrafast intramolecular vibrational energy transfer in carbon nitride hydrocolloid examined by femtosecond two-dimensional infrared spectroscopy

In this work, ultrafast vibrational and structural processes in a graphitic carbon nitride hydrocolloid system were studied using a combination of linear infrared and nonlinear two-dimensional infrared (2D IR) spectroscopies. The experimentally observed three IR line shapes in the C=N stretching vibration frequency region were analyzed and attributed to the rigid and conjugated molecular frame of the prepared g-CN molecular species, which is believed to be a dimeric tris-s-triazine, as well as attributed to insignificant solvent influence on the delocalized C=N vibrations. Vibrational transition density cubes were also computed for the proposed g-CN dimer, confirming the heterocyclic C=N stretching nature of the three IR absorption peaks. Intramolecular vibrational energy transfer dynamics and spectral diffusion of the g-CN system were characterized by examining a series of time-dependent 2D IR spectra. A picosecond intramolecular vibrational energy redistribution process was found to occur among these delocalized C=N stretching modes, acting as an efficient vibrational energy transfer channel. This work reasonably connects the experimentally observed IR signature to a specific g-CN structure and also provides the first report on the ultrafast intramolecular processes of such carbon nitride systems. The obtained results are fundamentally important for understanding the molecular mechanisms of such carbon-nitride based functional materials.

Super metal hydrogels constructed from a simple tripodal gelator and rare earth metal ions and its application in highly selective and ultrasensitive detection of histidine

A series of stable super metal hydrogels (TP-Ms, M = Tb3+, Eu3+, La3+ and Ce3+) with a low critical gelation concentration (2.28 × 10-3 M, 0.1%) was successfully constructed by forming hierarchical assemblies of a tripodal gelator (TP) with rare earth metal ions (Tb3+, Eu3+, La3+ and Ce3+). Interestingly, the super metal hydrogels TP-Eu and TP-La show a specific and ultrasensitive response to histidine (His). The addition of a series of amino acids into the metal hydrogels TP-Eu and TP-La showed that only His could induce distinct fluorescent enhancement for TP-Eu and TP-La, while other amino acids did not significantly interfere with the His sensing process. The LODs of super metal-hydrogel TP-Eu and TP-La for His are (1.83-1.94) × 10-9 and (1.83-1.85) × 10-9 M, respectively. In addition, constructing super supramolecular metal hydrogels by hierarchical assemblies of an easily synthesized tripodal gelator and rare earth metal ions is a novel and efficient approach to the design and development of multi-functional super supramolecular metal hydrogel-based materials.