Molecular Quadripod as a Noncovalent Interfacial Coupling Reagent for Forming Immobilized Coordination Assemblies

Photoelectrochemical Cells with a Pyridine-Anchored Bilayer Photoanode for Water Splitting

A dye-sensitized photoanode is prepared by coassembling a Ru complex photosensitizer and a Ru water oxidation catalyst (WOC) on a TiO2 substrate, in which the WOC molecules are immobilized in a layer-by-layer fashion through metal-pyridine coordination with the aid of a bifunctional anchoring and bridging molecule containing multiple pyridine groups. Under visible-light irradiation, an anodic photocurrent of around 200 μA/cm2 has been achieved with O2 and H2 being generated at the photoanode and Pt counter electrode, respectively. The pyridine anchoring strategy provides a simple method to prepare photoelectrodes for applications in photoelectrochemical cells.

A Multi-Pyridine-Anchored and -Linked Bilayer Photocathode for Water Reduction

The development of efficient photocathodes is of critical importance for the constructions of promising tandem photo-electrochemical cells. Most known dye-sensitized photocathodes are prepared with the conventional carboxylic or phosphonic acid anchors and require the presence of other terminal linking groups to connect catalysts; they suffer from high synthetic difficulty and low adsorption stability in aqueous media. Here, a compact bilayer photocathode has been prepared by using a pyrene-based photosensitizer with multiple terminal pyridine moieties as both the anchoring and linking groups to connect a Co hydrogen-evolution catalyst to the NiO substrate. The catalyst and dye molecule are assembled in a layer-by-layer manner on NiO through the metal-pyridine coordination. This photocathode exhibits good dye adsorption stability in aqueous media. A stable cathodic photocurrent of 70 μA cm-2 was achieved, with H2 being generated at the photocathode under the visible-light irradiation. The Faraday efficiency of H2 evolution was estimated to be 9.1 %. Transient absorption spectral studies suggest that the interfacial hole transfer occurs within a few picoseconds. The integration of the organic photosensitizer with pyridine anchoring and linking groups is expected to provide a simple method for the fabrication of stable and efficient photocathodes.

Photoelectrochemical cells with a pyridine-anchored organic dye photoanode for efficient H2 generation by water reduction

TiO₂ photoelectrodes modified with organic dyes with pyridine anchoring groups are prepared, which are used as photoanodes of dye-sensitized photoelectrochemical cells for efficient water reduction with high photocurrent density and stability in aqueous solutions. Vigorous H₂ generation with a production rate of around 250 μmol h^-1 is realized with a photoanode of an active area of 5 × 5 cm².

Construction of Ultrathin Layer-by-Layer Films of Oligothiophene Derivatives on an Electrode

Oligothiophene derivatives, which are known as p-type materials, have been synthesized, and their ultrathin layer-by-layer films have been constructed on an electrode using a simple and convenient dipping method. The stepwise deposition behavior of quaterthiophene and sexithiophene derivatives on the electrode via hydrogen bonding was monitored by electronic spectra measurement, and the constructed films were evaluated by X-ray photoelectron spectroscopy, grazing-incidence small-angle X-ray scattering, and cyclic voltammetry. It has been clarified that the constructed layer-by-layer films were electroactive and photoelectroactive.

Multidentate Anchors for Surface Functionalization

The bottom-up functionalization of solid surfaces shows increasing importance for a wide range of interdisciplinary applications. Multidentate anchors with more than two contact points can bind to solid surfaces with strong chemisorption, well-defined upright configuration, and tailored functionality. The surface functionalization using multidentate anchors with three (tripodal), four (quadripodal), or more binding points is summarized herein, with a focus on those beyond classical tripodal anchors. In particular, the molecular design on how to achieve multisite interaction between anchor and substrate and the introduction of functional groups to thin films are discussed.

On-Surface Self-Assembly of Stimuli-Responsive Metallo-Organic Films: Automated Ultrasonic Spray-Coating and Electrochromic Devices

We demonstrate the on-surface formation of homogeneous and uniform electrochromic films via ultrasonic spray coating. This fully automated process is capable of fabricating metallo-organic films on transparent conducting oxides (TCOs) on glass or flexible poly(ethylene terephthalate) (PET) with surface areas of up to 36 cm² and film thicknesses of half a micron. The assembly process involves alternatingly spray-coating dilute solutions of structurally well-defined iron polypyridyl ([Fe(mbpy-py)₃]²⁺) complexes and bis(benzonitrile)palladium dichloride (Pd(PhCN)₂Cl₂) onto conductive substrates, where the latter palladium salt was used as the inorganic cross-linker. The on-surface self-assembled three-dimensional networks are intensely colored and were subsequently integrated into laminated electrochromic devices (ECDs) containing a lithium-based gel electrolyte. The ECDs retain their intense color in the ground state, having a Δ T_max of 40-49% at λ_max ≈ 600 nm, and can be operated for up to 1500 redox cycles. The fluorine-doped tin oxide counter electrode coated with poly(3,4-ethylene-dioxythiophene)polystyrene sulfonate (PEDOT:PSS) as a charge-storage layer resulted in these stable devices. A significant decrease in the potential window of Δ E ≈ 2.5 V was achieved by using a metal grid on PET as the counter electrode. The operation of the electrochromic films is diffusion-controlled, and the diffusion coefficients ( D_f) reflect their molecular densities. During these studies, we found that ClO₄^- is a suitable counterion of the lithium-based electrolytes for optimal ECD performance.