H/D Isotope Effects Reveal Factors Controlling Catalytic Activity in Co-Based Oxides for Water Oxidation

Stabilizing atomic Ru species in conjugated sp2 carbon-linked covalent organic framework for acidic water oxidation

Suppressing the kinetically favorable lattice oxygen oxidation mechanism pathway and triggering the adsorbate evolution mechanism pathway at the expense of activity are the state-of-the-art strategies for Ru-based electrocatalysts toward acidic water oxidation. Herein, atomically dispersed Ru species are anchored into an acidic stable vinyl-linked 2D covalent organic framework with unique crossed π-conjugation, termed as COF-205-Ru. The crossed π-conjugated structure of COF-205-Ru not only suppresses the dissolution of Ru through strong Ru-N motifs, but also reduces the oxidation state of Ru by multiple π-conjugations, thereby activating the oxygen coordinated to Ru and stabilizing the oxygen vacancies during oxygen evolution process. Experimental results including X-ray absorption spectroscopy, in situ Raman spectroscopy, in situ powder X-ray diffraction patterns, and theoretical calculations unveil the activated oxygen with elevated energy level of O 2p band, decreased oxygen vacancy formation energy, promoted electrochemical stability, and significantly reduced energy barrier of potential determining step for acidic water oxidation. Consequently, the obtained COF-205-Ru displays a high mass activity with 2659.3 A g-1, which is 32-fold higher than the commercial RuO2, and retains long-term durability of over 280 h. This work provides a strategy to simultaneously promote the stability and activity of Ru-based catalysts for acidic water oxidation.

Reconstructing Hydrogen-Bond Network for Efficient Acidic Oxygen Evolution

Developing highly active oxygen evolution reaction (OER) catalysts in acidic conditions is a pressing demand for proton-exchange membrane water electrolysis. Manipulating proton character at the electrified interface, as the crux of all proton-coupled electrochemical reactions, is highly desirable but elusive. Herein we present a promising protocol, which reconstructs a connected hydrogen-bond network between the catalyst-electrolyte interface by coupling hydrophilic units to boost acidic OER activity. Modelling on N-doped-carbon-layer clothed Mn-doped-Co3O4 (Mn-Co3O4@CN), we unravel that the hydrogen-bond interaction between CN units and H2O molecule not only drags the free water to enrich the surface of Mn-Co3O4 but also serves as a channel to promote the dehydrogenation process. Meanwhile, the modulated local charge of the Co sites from CN units/Mn dopant lowers the OER barrier. Therefore, Mn-Co3O4@CN surpasses RuO2 at high current density (100 mA cm-2 @ ~538 mV).

γ-MnO2 as an Electron Reservoir for RuO2 Oxygen Evolution Catalyst in Acidic Media

Developing highly active and durable catalysts in acid conditions remains an urgent issue due to the sluggish kinetics of oxygen evolution reaction (OER). Although RuO2 has been a state-of-the-art commercial catalyst for OER, it encounters poor stability and high cost. In this study, the electronic reservoir regulation strategy is proposed to promote the performance of acidic water oxidation via constructing a RuO2/MnO2 heterostructure supported on carbon cloth (CC) (abbreviated as RuO2/MnO2/CC). Theoretical and experimental results reveal that MnO2 acts as an electron reservoir for RuO2. It facilitates electron transfer from RuO2, enhancing its activity prior to OER, and donates electrons to RuO2, improving its stability after OER. Consequently, RuO2/MnO2/CC exhibits better performance compared to commercial RuO2, with an ultrasmall overpotential of 189 mV at 10 mA cm-2 and no signs of deactivation even after 800 h of electrolysis in 0.5 m H2SO4 at 10 mA cm-2. When applied as the anode in a proton exchange membrane water electrolyzer, the cost-efficient RuO2/MnO2/CC catalyst only requires a cell voltage of 1.661 V to achieve the water-splitting current of 1 A cm-2, and the noble metal cost is as low as US$ 0.00962 cm-2, indicating potential for practical applications.

Thermally Enhanced Relay Electrocatalysis of Nitrate-to-Ammonia Reduction over Single-Atom-Alloy Oxides

The electrochemical nitrate reduction reaction (NO3RR) holds promise for converting nitrogenous pollutants to valuable ammonia products. However, conventional electrocatalysis faces challenges in effectively driving the complex eight-electron and nine-proton transfer process of the NO3RR while also competing with the hydrogen evolution reaction. In this study, we present the thermally enhanced electrocatalysis of nitrate-to-ammonia conversion over nickel-modified copper oxide single-atom alloy oxide nanowires. The catalyst demonstrates improved ammonia production performance with a Faradaic efficiency of approximately 80% and a yield rate of 9.7 mg h-1 cm-2 at +0.1 V versus a reversible hydrogen electrode at elevated cell temperatures. In addition, this thermally enhanced electrocatalysis system displays impressive stability, interference resistance, and favorable energy consumption and greenhouse gas emissions for the simulated industrial wastewater treatment. Complementary in situ analyses confirm that the significantly superior relay of active hydrogen species formed at Ni sites facilitates the thermal-field-coupled electrocatalysis of Cu surface-adsorbed *NOx hydrogenation. Theoretical calculations further support the thermodynamic and kinetic feasibility of the relay catalysis mechanism for the NO3RR over the Ni1Cu model catalyst. This study introduces a conceptual thermal-electrochemistry approach for the synergistic regulation of complex catalytic processes, highlighting the potential of multifield-coupled catalysis to advance sustainable-energy-powered chemical synthesis technologies.

Adjusting the valence band center of Co-Ni-bimetallic sulfides through lattice expansion and stacking faults triggered by strain engineering to boost oxygen evolution reaction

Stress engineering can improve catalytic performance by straining the catalyst lattice. An electrocatalyst, Co₃S₄/Ni₃S₂-10%Mo@NC, was prepared with abundant lattice distortion to boost oxygen evolution reaction (OER). With the assistance of the intramolecular steric hindrance effect of metal-organic frameworks, slow dissolution by MoO₄^2- of the Ni substrate and recrystallization of Ni²⁺ was observed in the process of Co(OH)F crystal growth with mild temperature and short time reaction. The lattice expansion and stacking faults created defects inside the Co₃S₄ crystal, improved the material conductivity, optimized the valence band electron distribution of the material, and promoted the rapid conversion of the reaction intermediates. The presence of reactive intermediates of the OER under catalytic conditions was investigated using operando Raman spectroscopy. The electrocatalysts exhibited super high performance, a current density of 10 mA cm^-2 at an overpotential of 164 mV and 100 mA cm^-2 at 223 mV, which were comparable to those of integrated RuO₂. Our work for the first time demonstrates that the dissolution-recrystallization triggered by strain engineering is a good modulation approach to adjust the structure and surface activity of catalyst, suggesting promising industrial application.

Dynamically Reversible Interconversion of Molecular Catalysts for Efficient Electrooxidation of Propylene into Propylene Glycol

For the electrooxidation of propylene into 1,2-propylene glycol (PG), the process involves two key steps of the generation of *OH and the transfer of *OH to the C═C bond in propylene. The strong *OH binding energy (E_B(*OH)) favors the dissociation of H₂O into *OH, whereas the transfer of *OH to propylene will be impeded. The scaling relationship of the E_B(*OH) plays a key role in affecting the catalytic performance toward propylene electrooxidation. Herein, we adopt an immobilized Ag pyrazole molecular catalyst (denoted as AgPz) as the electrocatalyst. The pyrrolic N-H in AgPz could undergo deprotonation to form pyrrolic N (denoted as AgPz-H_vac), which can be protonated reversibly. During propylene electrooxidation, the strong E_B(*OH) on AgPz favors the dissociation of H₂O into *OH. Subsequently, the AgPz transforms into AgPz-H_vac that possesses weak E_B(*OH), benefiting to the further combination of *OH and propylene. The dynamically reversible interconversion between AgPz and AgPz-H_vac accompanied by changeable E_B(*OH) breaks the scaling relationship, thus greatly lowering the reaction barrier. At 2.0 V versus Ag/AgCl electrode, AgPz achieves a remarkable yield rate of 288.9 mmol_PG g_cat^-1 h^-1, which is more than one order of magnitude higher than the highest value ever reported.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Unraveling Sequential Oxidation Kinetics and Determining Roles of Multi-Cobalt Active Sites on Co3O4 Catalyst for Water Oxidation

The multi-redox mechanism involving multi-sites has great implications to dictate the catalytic water oxidation. Understanding the sequential dynamics of multi-steps in oxygen evolution reaction (OER) cycles on working catalysts is a highly important but challenging issue. Here, using quasi-operando transient absorption (TA) spectroscopy and a typical photosensitization strategy, we succeeded in resolving the sequential oxidation kinetics involving multi-active sites for water oxidation in OER catalytic cycle, with Co₃O₄ nanoparticles as model catalysts. When OER initiates from fast oxidation of surface Co²⁺ ions, both surface Co²⁺ and Co³⁺ ions are active sites of the multi-cobalt centers for water oxidation. In the sequential kinetics (Co²⁺ → Co³⁺ → Co⁴⁺), the key characteristic is fast oxidation and slow consumption for all the cobalt species. Due to this characteristic, the Co⁴⁺ intermediate distribution plays a determining role in OER activity and results in the slow overall OER kinetics. These insights shed light on the kinetic understanding of water oxidation on heterogeneous catalysts with multi-sites.

Effect of Proton Transfer on Electrocatalytic Water Oxidation by Manganese Phosphates

The effect of proton transfer on water oxidation has hardly been measurably established in heterogeneous electrocatalysts. Herein, two isomorphous manganese phosphates (NH₄ MnPO₄  ⋅ H₂ O and KMnPO₄  ⋅ H₂ O) were designed to form an ideal platform to study the effect of proton transfer on water oxidation. The hydrogen-bonding network in NH₄ MnPO₄  ⋅ H₂ O has been proven to be solely responsible for its better activity. The differences of the proton transfer kinetics in the two materials indicate a fast proton hopping transfer process with a low activation energy in NH₄ MnPO₄  ⋅ H₂ O. In addition, the hydrogen-bonding network can effectively promote the proton transfer between adjacent Mn sites and further stabilize the Mn^III -OH intermediates. The faster proton transfer results in a higher proportion of zeroth-order in [H⁺ ] for OER. Thus, proton transfer-affected electrocatalytic water oxidation has been measurably observed to bring detailed insights into the mechanism of water oxidation.

Trends and progress in application of cobalt-based materials in catalytic, electrocatalytic, photocatalytic, and photoelectrocatalytic water splitting

There has been a growing interest in water oxidation in recent two decades. Along with that, remarkable discovery of formation of a mysterious catalyst layer upon application of an anodic potential of 1.13 V vs. standard hydrogen electrode (SHE) to an inert indium tin oxide electrode immersed in phosphate buffer containing Co^(II) ions by Nocera et.al, has greatly attracted researchers interest. These researches have oriented in two directions; one focuses on obtaining better understanding of the reported mysterious catalyst layer, further modification, and improved performance, and the second approach is about designing coordination complexes of cobalt and investigating their properties toward the application in water splitting. Although there have been critical debates on true catalysts that are responsible for water oxidation in homogeneous systems of coordination complexes of cobalt, and the case is not totally closed, in this short review, our focus will be mainly on recent major progress and developments in the design and the application of cobalt oxide-based materials in catalytic, electrocatalytic, photocatalytic, and photoelectrocatalytic water oxidation reaction, which have been reported since pioneering report of Nocera in 2008 (Kanan Matthew and Nocera Daniel in Science 321:1072-1075, 2008).

Oxygen Evolution Activity of Amorphous Cobalt Oxyhydroxides: Interconnecting Precatalyst Reconstruction, Long-Range Order, Buffer-Binding, Morphology, Mass Transport, and Operation Temperature

Nanocrystalline or amorphous cobalt oxyhydroxides (CoCat) are promising electrocatalysts for the oxygen evolution reaction (OER). While having the same short-range order, CoCat phases possess different electrocatalytic properties. This phenomenon is not conclusively understood, as multiple interdependent parameters affect the OER activity simultaneously. Herein, a layered cobalt borophosphate precatalyst, Co(H₂ O)₂ [B₂ P₂ O₈ (OH)₂ ]·H₂ O, is fully reconstructed into two different CoCat phases. In contrast to previous reports, this reconstruction is not initiated at the surface but at the electrode substrate to catalyst interface. Ex situ and in situ investigations of the two borophosphate derived CoCats, as well as the prominent CoP_i and CoB_i identify differences in the Tafel slope/range, buffer binding and content, long-range order, number of accessible edge sites, redox activity, and morphology. Considering and interconnecting these aspects together with proton mass-transport limitations, a comprehensive picture is provided explaining the different OER activities. The most decisive factors are the buffers used for reconstruction, the number of edge sites that are not inhibited by irreversibly bonded buffers, and the morphology. With this acquired knowledge, an optimized OER system is realized operating in near-neutral potassium borate medium at 1.62 ± 0.03 V_RHE yielding 250 mA cm^-2 at 65 °C for 1 month without degrading performance.

Time-Resolved Vibrational and Electronic Spectroscopy for Understanding How Charges Drive Metal Oxide Catalysts for Water Oxidation

Temporally resolved spectroscopy is a powerful approach for gaining detailed mechanistic understanding of water oxidation at robust Earth-abundant metal oxide catalysts for guiding efficiency improvement of solar fuel conversion systems. Beyond detecting and structurally identifying surface intermediates by vibrational and accompanying optical spectroscopy, knowledge of how charges, sequentially delivered to the metal oxide surface, drive the four-electron water oxidation cycle is critical for enhancing catalytic efficiency. Key issues addressed in this Perspective are the experimental requirements for establishing the kinetic relevancy of observed surface species and the discovery of the rate-boosting role of encounters of two or more one-electron surface hole charges, often in the form of randomly hopping metal oxo or oxyl moieties, for accessing very low-barrier O-O bond-forming pathways. Recent spectroscopic breakthroughs of metal oxide photo- and electrocatalysts inspire future research poised to take advantage of new highly sensitive spectroscopic tools and of methods for fast catalysis triggering.

Intramolecular hydroxyl nucleophilic attack pathway by a polymeric water oxidation catalyst with single cobalt sites

Exploration of efficient water oxidation catalysts (WOCs) is the primary challenge in conversion of renewable energy into fuels. Here we report a molecularly well-defined heterogeneous WOC with Aza-fused, π-conjugated, microporous polymer (Aza-CMP) coordinated single cobalt sites (Aza-CMP-Co). The single cobalt sites in Aza-CMP-Co exhibited superior activity under alkaline and near-neutral conditions. Moreover, the molecular nature of the isolated catalytic sites makes Aza-CMP-Co a reliable model for studying the heterogeneous water oxidation mechanism. By a combination of experimental and theoretical results, a pH-dependent nucleophilic attack pathway for O-O bond formation was proposed. Under alkaline conditions, the intramolecular hydroxyl nucleophilic attack (IHNA) process with which the adjacent -OH group nucleophilically attacks Co4+=O was identified as the rate-determining step. This process leads to lower activation energy and accelerated kinetics than those of the intermolecular water nucleophilic attack (WNA) pathway. This study provides significant insights into the crucial function of electrolyte pH in water oxidation catalysis and enhancement of water oxidation activity by regulation of the IHNA pathway.

Hydrogen Spillover-Bridged Volmer/Tafel Processes Enabling Ampere-Level Current Density Alkaline Hydrogen Evolution Reaction under Low Overpotential

Water-alkaline electrolysis holds a great promise for industry-scale hydrogen production but is hindered by the lack of enabling hydrogen evolution reaction electrocatalysts to operate at ampere-level current densities under low overpotentials. Here, we report the use of hydrogen spillover-bridged water dissociation/hydrogen formation processes occurring at the synergistically hybridized Ni₃S₂/Cr₂S₃ sites to incapacitate the inhibition effect of high-current-density-induced high hydrogen coverage at the water dissociation site and concurrently promote Volmer/Tafel processes. The mechanistic insights critically important to enable ampere-level current density operation are depicted from the experimental and theoretical studies. The Volmer process is drastically boosted by the strong H₂O adsorption at Cr_5c sites of Cr₂S₃, the efficient H₂O* dissociation via a heterolytic cleavage process (Cr_5c-H₂O* + S_3c(#) → Cr_5c-OH* + S_3c-H^#) on the Cr_5c/S_3c sites in Cr₂S₃, and the rapid desorption of OH* from Cr_5c sites of Cr₂S₃ via a new water-assisted desorption mechanism (Cr_5c-OH* + H₂O(aq) → Cr_5c-H₂O* + OH^-(aq)), while the efficient Tafel process is achieved through hydrogen spillover to rapidly transfer H^# from the synergistically located H-rich site (Cr₂S₃) to the H-deficient site (Ni₃S₂) with excellent hydrogen formation activity. As a result, the hybridized Ni₃S₂/Cr₂S₃ electrocatalyst can readily achieve a current density of 3.5 A cm^-2 under an overpotential of 251 ± 3 mV in 1.0 M KOH electrolyte. The concept exemplified in this work provides a useful means to address the shortfalls of ampere-level current-density-tolerant Hydrogen evolution reaction (HER) electrocatalysts.

Understanding the Roles of Electrogenerated Co3+ and Co4+ in Selectivity-Tuned 5-Hydroxymethylfurfural Oxidation

The Co-based electrocatalyst is among the most promising candidates for electrochemical oxidation of 5-hydroxymethylfurfural (HMF). However, the intrinsic active sites and detailed mechanism of this catalyst remains unclear. We combine experimental evidence and a theoretical study to show that electrogenerated Co³⁺ and Co⁴⁺ species act as chemical oxidants but with distinct roles in selective HMF oxidation. It is found that Co³⁺ is only capable of oxidizing formyl group to produce carboxylate while Co⁴⁺ is required for the initial oxidation of hydroxyl group with significantly faster kinetics. As a result, the product distribution shows explicit dependence on the Co oxidation states and selective production of 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) and 2,5-furandicarboxylic acid (FDCA) are achieved by tuning the applied potential. This work offers essential mechanistic insight on Co-catalyzed organic oxidation reactions and might guide the design of more efficient electrocatalysts.

Operando tracking of oxidation-state changes by coupling electrochemistry with time-resolved X-ray absorption spectroscopy demonstrated for water oxidation by a cobalt-based catalyst film

Transition metal oxides are promising electrocatalysts for water oxidation, i.e., the oxygen evolution reaction (OER), which is critical in electrochemical production of non-fossil fuels. The involvement of oxidation state changes of the metal in OER electrocatalysis is increasingly recognized in the literature. Tracing these oxidation states under operation conditions could provide relevant information for performance optimization and development of durable catalysts, but further methodical developments are needed. Here, we propose a strategy to use single-energy X-ray absorption spectroscopy for monitoring metal oxidation-state changes during OER operation with millisecond time resolution. The procedure to obtain time-resolved oxidation state values, using two calibration curves, is explained in detail. We demonstrate the significance of this approach as well as possible sources of data misinterpretation. We conclude that the combination of X-ray absorption spectroscopy with electrochemical techniques allows us to investigate the kinetics of redox transitions and to distinguish the catalytic current from the redox current. Tracking of the oxidation state changes of Co ions in electrodeposited oxide films during cyclic voltammetry in neutral pH electrolyte serves as a proof of principle.

Do multinuclear 3d metal catalysts achieve O-O bond formation via radical coupling or via water nucleophilic attack? WNA leads the way in [Co4O4]n

Catalytic water oxidation is a required process for clean energy production based on the concept of artificial photosynthesis. Here, we provide in situ spectroscopic and computational analysis for the closest known photosystem II analog, [Co₄O₄]ⁿ⁺ ([Co₄O₄Py₄Ac₄]⁰, Py = pyridine and Ac = CH₃COO^-), which catalyzes electrochemical water oxidation. In situ extended X-ray absorption fine structure detects an ultrashort, Co^IV=O (~1.67 Å) moiety, a crucial intermediate for O-O bond formation. Density function theory analyses show that the intermediate has two Co^IV centers and a Co^IV=O unit of strong radicaloid character sufficient to support a Co^IV=O + H₂O = Co-OOH + H⁺ transition, where the carboxyl ligand accepts the proton and the bridging oxygen stabilizes the peroxide via hydrogen bonding. The proposed water nucleophilic attack mechanism accounts for all prior spectroscopic evidence on the Co₄O₄⁴⁺ core. Our results are important for the design and development of efficient water oxidation catalysts, which contribute to the ultimate goal of clean energy from artificial photosynthesis.

Modifying redox properties and local bonding of Co3O4 by CeO2 enhances oxygen evolution catalysis in acid

Developing efficient and stable earth-abundant electrocatalysts for acidic oxygen evolution reaction is the bottleneck for water splitting using proton exchange membrane electrolyzers. Here, we show that nanocrystalline CeO₂ in a Co₃O₄/CeO₂ nanocomposite can modify the redox properties of Co₃O₄ and enhances its intrinsic oxygen evolution reaction activity, and combine electrochemical and structural characterizations including kinetic isotope effect, pH- and temperature-dependence, in situ Raman and ex situ X-ray absorption spectroscopy analyses to understand the origin. The local bonding environment of Co₃O₄ can be modified after the introduction of nanocrystalline CeO₂, which allows the Co^III species to be easily oxidized into catalytically active Co^IV species, bypassing the potential-determining surface reconstruction process. Co₃O₄/CeO₂ displays a comparable stability to Co₃O₄ thus breaks the activity/stability tradeoff. This work not only establishes an efficient earth-abundant catalysts for acidic oxygen evolution reaction, but also provides strategies for designing more active catalysts for other reactions.

Developing efficient and stable earth-abundant electrocatalysts for acidic oxygen evolution reaction is challenging. Here, the authors modify the local bonding environment of Co₃O₄ by CeO2 nanocrystallites to regulate the redox properties, thus enhance the catalytic activity.

Evaluation of Poorly Soluble Drugs' Dissolution Rate by Laser Scattering in Different Water Isotopologues

The most important task in the design of dosage forms is to modify the pharmaceutical substances structure in order to increase solubilization, targeted delivery, controlled rate of drug administration, and its bioavailability. Screening-laboratory (in vitro) or computer (in silico)-as a procedure for selecting a prototype for the design of a drug molecule, involves several years of research and significant costs. Among a large number of solvents and diluents (alcohol, ether, oils, glycerol, Vaseline) used in the pharmaceutical industry for the manufacture of drugs water finds the greatest application. This is because all biological reactions (reactions in living systems) take place in water and distribution of the fluid in the body and the substances found within is critical for the maintenance of intracellular and extracellular functions. Modern studies in the field of the stable isotopic compositions of natural water and its structure and properties make it possible to use isotopic transformations of the water to improve the pharmacokinetic properties of medicinal substances without previous structural modification. It is known that by replacing any of the atoms in the reacting substance molecule with its isotope, it is possible to record changes in the reactivity, which are expressed as a change in the reaction rate constant, i.e., in the manifestation of the kinetic isotope effect (KIE). The article presents the results of studies on the effect of the kinetic isotope effect of a solvent-water-on increasing the solubility and dissolution rate constants of poorly soluble drugs using laser diffraction spectroscopy. The results of the studies can be successfully implemented in pharmaceutical practice to overcome the poor solubility of medicinal substances of classes II and IV, according to the biopharmaceutical classification system (BCS), in water for pharmaceutical purposes by performing its preliminary and safe isotopic modification.

Reaction kinetics and interplay of two different surface states on hematite photoanodes for water oxidation

Understanding the function of surface states on photoanodes is crucial for unraveling the underlying reaction mechanisms of water oxidation. For hematite photoanodes, only one type of surface states with higher oxidative energy (S1) has been proposed and verified as reaction intermediate, while the other surface state located at lower potentials (S2) was assigned to inactive or recombination sites. Through employing rate law analyses and systematical (photo)electrochemical characterizations, here we show that S2 is an active reaction intermediate for water oxidation as well. Furthermore, we demonstrate that the reaction kinetics and dynamic interactions of both S1 and S2 depend significantly on operational parameters, such as illumination intensity, nature of the electrolyte, and applied potential. These insights into the individual reaction kinetics and the interplay of both surface states are decisive for designing efficient photoanodes.

Early-stage formation of (hydr)oxo bridges in transition-metal catalysts for photosynthetic processes

Ab initio simulations have been used to assess reaction pathways for the formation of M–(hydr)oxo–M (M = Co, Mn, Ni) bridges from M(ii) aqueous solutions, as early-stage building blocks of transition-metal catalysts for oxygen evolution.

Molecular and heterogeneous water oxidation catalysts: recent progress and joint perspectives

The recent synthetic and mechanistic progress in molecular and heterogeneous water oxidation catalysts highlights the new, overarching strategies for knowledge transfer and unifying design concepts.

Elucidation of Factors That Govern the 2e-/2H+ vs 4e-/4H+ Selectivity of Water Oxidation by a Cobalt Corrole

Considering the importance of water splitting as the best solution for clean and renewable energy, the worldwide efforts for development of increasingly active molecular water oxidation catalysts must be accompanied by studies that focus on elucidating the mode of actions and catalytic pathways. One crucial challenge remains the elucidation of the factors that determine the selectivity of water oxidation by the desired 4e^-/4H⁺ pathway that leads to O₂ rather than by 2e^-/2H⁺ to H₂O₂. We now show that water oxidation with the cobalt-corrole CoBr₈ as electrocatalyst affords H₂O₂ as the main product in homogeneous solutions, while heterogeneous water oxidation by the same catalyst leads exclusively to oxygen. Experimental and computation-based investigations of the species formed during the process uncover the formation of a Co(III)-superoxide intermediate and its preceding high-valent Co-oxyl complex. The competition between the base-catalyzed hydrolysis of Co(III)-hydroperoxide [Co(III)-OOH]^- to release H₂O₂ and the electrochemical oxidation of the same to release O₂ via [Co(III)-O₂^•]^- is identified as the key step determining the selectivity of water oxidation.

Spectroscopic and Electrokinetic Evidence for a Bifunctional Mechanism of the Oxygen Evolution Reaction*

A bifunctional oxygen evolution reaction (OER) mechanism, in which the energetically demanding step of the attack of hydroxide on a metal oxo unit is facilitated by a hydrogen atom transfer to a second site, has the potential to circumvent the scaling relationship. However, the bifunctional mechanism has hitherto only been supported by theoretical computations. Here we describe an operando Raman spectroscopic and electrokinetic study of two highly active OER catalysts, FeOOH-NiOOH and NiFe layered double hydroxide (LDH). The data support two distinct mechanisms for the two catalysts: FeOOH-NiOOH operates by a bifunctional mechanism where the rate-determining O-O bond forming step is the OH^- attack on a Fe=O coupled with a hydrogen atom transfer to a Ni^III -O site, whereas NiFe LDH operates by a conventional mechanism of four consecutive proton-coupled electron transfer steps. The experimental validation of the bifunctional mechanism enhances the understanding of OER catalysts.

Key activity descriptors of nickel-iron oxygen evolution electrocatalysts in the presence of alkali metal cations

Efficient oxygen evolution reaction (OER) electrocatalysts are pivotal for sustainable fuel production, where the Ni-Fe oxyhydroxide (OOH) is among the most active catalysts for alkaline OER. Electrolyte alkali metal cations have been shown to modify the activity and reaction intermediates, however, the exact mechanism is at question due to unexplained deviations from the cation size trend. Our X-ray absorption spectroelectrochemical results show that bigger cations shift the Ni^2+/(3+δ)+ redox peak and OER activity to lower potentials (however, with typical discrepancies), following the order CsOH > NaOH ≈ KOH > RbOH > LiOH. Here, we find that the OER activity follows the variations in electrolyte pH rather than a specific cation, which accounts for differences both in basicity of the alkali hydroxides and other contributing anomalies. Our density functional theory-derived reactivity descriptors confirm that cations impose negligible effect on the Lewis acidity of Ni, Fe, and O lattice sites, thus strengthening the conclusions of an indirect pH effect.

It is commonly accepted that electrolyte alkali metal cations modify the catalytic activity for oxygen evolution reaction. Here the authors challenge this assumption, showing that the activity is actually affected by a change in the electrolyte pH rather than a specific alkali cation.

Characterizing electronic and atomic structures for amorphous and molecular metal oxide catalysts at functional interfaces by combining soft X-ray spectroscopy and high-energy X-ray scattering

Amorphous thin film materials and heterogenized molecular catalysts supported on electrode and other functional interfaces are widely investigated as promising catalyst formats for applications in solar and electrochemical fuels catalysis. However the amorphous character of these catalysts and the complexity of the interfacial architectures that merge charge transport properties of electrode and semiconductor supports with discrete sites for multi-step catalysis poses challenges for probing mechanisms that activate and tune sites for catalysis. This minireview discusses advances in soft X-ray spectroscopy and high-energy X-ray scattering that provide opportunities to resolve interfacial electronic and atomic structures, respectively, that are linked to catalysis. This review discusses how these techniques can be partnered with advances in nanostructured interface synthesis for combined soft X-ray spectroscopy and high-energy X-ray scattering analyses of thin film and heterogenized molecular catalysts. These combined approaches enable opportunities for the characterization of both electronic and atomic structures underlying fundamental catalytic function, and that can be applied under conditions relevant to device applications.

Operando Raman spectroscopy tracks oxidation-state changes in an amorphous Co oxide material for electrocatalysis of the oxygen evolution reaction

Transition metal oxides are of high interest in both energy storage (batteries) and production of non-fossil fuels by (photo)electrocatalysis. Their functionally crucial charge (oxidation state) changes and electrocatalytic properties are best investigated under electrochemical operation conditions. We established operando Raman spectroscopy for investigation of the atomic structure and oxidation state of a non-crystalline, hydrated, and phosphate-containing Co oxide material (CoCat), which is an electrocatalyst for the oxygen evolution reaction (OER) at neutral pH and is structurally similar to LiCoO₂ of batteries. Raman spectra were collected at various sub-catalytic and catalytic electric potentials. ²H labeling suggests Co oxidation coupled to Co-OH deprotonation at catalytic potentials. ¹⁸O labeling supports O-O bond formation starting from terminally coordinated oxygen species. Two broad bands around 877 cm^-1 and 1077 cm^-1 are assigned to CoCat-internal H₂PO₄ ^-. Raman peaks corresponding to terminal oxide (Co=O) or reactive oxygen species were not detectable; 1000-1200 cm^-1 bands were instead assigned to two-phonon Raman scattering. At an increasingly positive potential, the intensity of the Raman bands decreased, which is unexpected and explained by self-absorption relating to CoCat electrochromism. A red-shift of the Co-O Raman bands with increasing potentials was described by four Gaussian bands of potential-dependent amplitudes. By linear combination of Raman band amplitudes, we can follow individually the Co(2+/3+) and Co(3+/4+) redox transitions, whereas previously published x-ray absorption spectroscopy analysis could determine only the averaged Co oxidation state. Our results show how electrochemical operando Raman spectroscopy can be employed as a potent analytical tool in mechanistic investigations on OER catalysis.

How coverage influences thermodynamic and kinetic isotope effects for H2/D2 dissociative adsorption on transition metals

Hydrogen isotope effects are influenced by adsorbate coverage: at high coverages, isotope effects are lower than at low coverages. This helps to rationalize observed isotope effects, allowing more precise elucidation of reaction mechanisms.

Operando diffuse reflectance UV-vis spectroelectrochemistry for investigating oxygen evolution electrocatalysts

A diffuse reflectance UV-vis spectroelectrochemical study on Zn_0.35Co_0.65O and CoAl₂O₄ tracking the changes of solid oxygen evolution catalysts under working conditions to derive structure-activity correlations and insights in the active structures.

Structural and functional role of anions in electrochemical water oxidation probed by arsenate incorporation into cobalt-oxide materials

Arsenate ions are incorporated in amorphous cobalt oxide catalysts at the periphery of the lattice or substituting cobalt ions.