Structure and Reactivity of a Mononuclear Nonheme Manganese(III)–Iodosylarene Complex

Controlling Redox Potential of a Manganese(III)-Bis(hydroxo) Complex through Protonation and the Hydrogen-Atom Transfer Reactivity

A series of mononuclear manganese(III)-hydroxo and -aqua complexes, [MnIII(TBDAP)(OH)2]+ (1), [MnIII(TBDAP)(OH)(OH2)]2+ (2) and [MnIII(TBDAP)(OH2)2]3+ (3), were prepared from a manganese(II) precursor and confirmed using various methods including X-ray crystallography. Thermodynamic analysis showed that protonation from hydroxo to aqua species resulted in increased redox potentials (E1/2) in the order of 1 (-0.15 V) < 2 (0.56 V) < 3 (1.11 V), while pKa values exhibited a reverse trend in the order of 3 (3.87) < 2 (11.84). Employing the Bordwell Equation, the O-H bond dissociation free energies (BDFE) of [MnII(TBDAP)(OH)(OH2)]+ and [MnII(TBDAP)(OH2)2]2+, related to the driving force of 1 and 2 in hydrogen atom transfer (HAT), were determined as 75.3 and 77.3 kcal mol-1, respectively. It was found that the thermodynamic driving force of 2 in HAT becomes greater than that of 1 as the redox potential of 2 increases through protonation from 1 to 2. Kinetic studies on electrophilic reactions using a variety of substrates revealed that 1 is only weakly reactive with O-H bonds, whereas 2 can activate aliphatic C-H bonds in addition to O-H bonds. The reaction rates increased by 1.4 × 104-fold for the O-H bonds by 2 over 1, which was explained by the difference in BDFE and the tunneling effect. Furthermore, 3, possessing the highest redox potential value, was found to undergo an aromatic C-H bond activation reaction under mild conditions. These results provide valuable insights into enhancing electrophilic reactivity by modulating the redox potential of manganese(III)-hydroxo and -aqua complexes through protonation.

Synthetic Advances for Mechanistic Insights: Metal-Oxygen Intermediates with a Macrocyclic Pyridinophane System

ConspectusMetalloenzymes, which are proteins containing earth-abundant transition-metal ions as cofactors in the active site, generate various metal-oxygen intermediates via activating a dioxygen molecule (O2) to mediate vital metabolic functions, such as the oxidative metabolism of xenobiotics and the biotransformation of naturally occurring molecules. By replicating the active sites of metalloenzymes, many bioinorganic chemists have studied the geometric and electronic properties and reactivities of model complexes to understand the nature of enzymatic intermediates and develop bioinspired metal catalysts. Among the reported model complexes, nonporphyrinic macrocyclic ligands are the predominant coordination system widely used in stabilizing and isolating diverse metal-oxygen intermediates, which allows us to extensively investigate the physicochemical characteristics of the analogs of reactive intermediates of metalloenzymes. In particular, it has been reported that the ring size of the macrocyclic ligands, defined by the number of atoms in the macrocyclic ring, drastically affects the identity of the metal-oxygen intermediate. Thus, systematic modification of the macrocyclic ligands has been a great subject being examined in various inorganic fields.In this Account, we describe synthetic advances of a macrocyclic ligand system by introducing pyridine donors into a 12-membered tetraazamacrocyclic ligand (12-TMC) that initially has 4 amine donors. Interestingly, the backbone of the pyridinophane ligand with 2 pyridine and 2 amine donors in a 12-membered ring is shown to be much more folded than in other macrocyclic ligands, thereby allowing the axial and equatorial donors to separately control the electronic structure of metal complexes. Then, we looked over independent electronic and steric effects on metal-oxygen species with thorough physicochemical analysis. The NiIII-peroxo complexes exhibit nucleophilic reactivity dependent on the steric hindrance of the second coordination sphere. Furthermore, the C-H bond strength of the second coordination sphere has also been an important factor in determining the stability of MnIV-bis(hydroxo) intermediates. Electronic tuning on CoIII-hydroperoxo intermediates results in a trend between the electron-donating abilities of para-substituents on pyridine in the pyridinophane ligand and electrophilic reactivities, from which mechanistic insights into the metal-hydroperoxo species have been gained. Importantly, the metal-oxygen intermediates supported by the pyridinophane ligand system have revealed quite challenging chemical reactions, including dioxygenase-like nitrile activation by CoIII-peroxo intermediates and the oxidation of aldehyde and aromatic compounds by manganese-oxygen intermediates. Based on the fine substitution of donors, we have addressed that those novel reactions originated from the unique framework of the pyridinophane system incorporating spin-crossover behavior and high redox potentials of the metal-oxygen intermediates. These results will be valuable for the structure-activity relationship of metal-oxygen intermediates, giving a better understanding on the enzymatic coordination system where amino acid ligands vary for specific chemical reactions.

Influence of Equatorial Co-Ligands on the Reactivity of LFeIIIOIPh

Previous biomimetic studies clearly proved that equatorial ligands significantly influence the redox potential and thus the stability/reactivity of biologically important oxoiron intermediates; however, no such studies were performed on FeIIIOIPh species. In this study, the influence of substituted pyridine co-ligands on the reactivity of iron(III)-iodosylbenzene adduct has been investigated in sulfoxidation and epoxidation reactions. Selective oxidation of thioanisole, cis-cyclooctene, and cis- and trans-stilbene in the presence of a catalytic amount of [FeII(PBI)3](OTf)2 with PhI(OAc)2 provide products in good to excellent yields through an FeIIIOIPh intermediate depending on the co-ligand (4R-Py) used. Several mechanistic studies were performed to gain more insight into the mechanism of oxygen atom transfer (OAT) reactions to support the reactive intermediate and investigate the effect of the equatorial co-ligands. Based on competitive experiments, including a linear free-energy relationship between the relative reaction rates (logkrel) and the σp (4R-Py) parameters, strong evidence has been observed for the electrophilic character of the reactive species. The presence of the [(PBI)2(4R-Py)FeIIIOIPh]3+ intermediates and the effect of the co-ligands was also supported by UV-visible measurements, including the color change from red to green and the hypsochromic shifts in the presence of co-ligands. This is another indication that the title iron(III)-iodosylbenzene adduct is able to oxygenate sulfides and alkenes before it is transformed into the oxoiron form by cleavage of the O-I bond.

Mechanisms of Sulfoxidation and Epoxidation Mediated by Iron(III)-Iodosylbenzene Adduct: Electron-Transfer vs. Oxygen-Transfer Mechanism

The mechanisms of sulfoxidation and epoxidation mediated by previously synthesized and characterized iron(III)-iodosylbenzene adduct, Fe^III(OIPh) were investigated using para-substituted thioanisole and styrene derivatives as model substrates. Based on detailed kinetic reaction experiments, including the linear free-energy relationships between the relative reaction rates (logk_rel) and the σ_p (4R-PhSMe) with ρ = -0.65 (catalytic) and ρ = -1.13 (stoichiometric), we obtained strong evidence that the stoichiometric and catalytic oxidation of thioanisoles mediated by Fe^III(OIPh) species involves direct oxygen transfer. The small negative slope -2.18 from log k_obs versus E_ox for 4R-PhSMe gives further clear evidence for the direct oxygen atom transfer mechanism. On the contrary, with the linear free-energy relationships between the relative reaction rates (logk_rel) and total substituent effect (TE, 4R-PhCHCH₂) parameters with slope = 0.33 (catalytic) and 2.02 (stoichiometric), the stoichiometric and catalytic epoxidation of styrenes takes place through a nonconcerted electron transfer (ET) mechanism, including the formation of the radicaloid benzylic radical intermediate in the rate-determining step. On the basis of mechanistic studies, we came to the conclusion that the title iron(III)-iodosylbenzene complex is able to oxygenate sulfides and alkenes before it is transformed into the oxo-iron form by cleavage of the O-I bond.

Structure and Reactivity of a Seven-Coordinate Ruthenium Iodosylbenzene Complex

Seven-coordinate (CN7) ruthenium-oxo species have attracted much attention as highly reactive intermediates in both organic and water oxidation. Apart from metal-oxo, other metal-oxidant adducts, such as metal-iodosylarenes, have also recently emerged as active oxidants. We reported herein the first example of a CN7 Ru-iodosylbenzene complex, [Ru^IV(bdpm)(pic)₂(O)I(Cl)Ph]⁺ (H₂bdpm = [2,2'-bipyridine]-6,6'-diylbis(diphenylmethanol); pic = 4-picoline). The X-ray crystal structure of this complex shows that it adopts a distorted pentagonal bipyramidal geometry with Ru-O(I) and O-I distances of 2.0451(39) and 1.9946(40) Å, respectively. This complex is highly reactive, and it readily undergoes O-atom transfer (OAT) and C-H bond activation reactions with various organic substrates. This work should provide insights for the development of new highly reactive oxidizing agents based on CN7 geometry.

Oxidation of Aldehydes into Carboxylic Acids by a Mononuclear Manganese(III) Iodosylbenzene Complex through Electrophilic C-H Bond Activation

The oxidation of aldehyde is one of the fundamental reactions in the biological system. Various synthetic procedures and catalysts have been developed to convert aldehydes into corresponding carboxylic acids efficiently under ambient conditions. In this work, we report the oxidation of aldehydes by a mononuclear manganese(III) iodosylbenzene complex, [Mn^III(TBDAP)(OIPh)(OH)]²⁺ (1), with kinetic and mechanistic studies in detail. The reaction of 1 with aldehydes resulted in the formation of corresponding carboxylic acids via a pre-equilibrium state. Hammett plot and reaction rates of 1 with 1°-, 2°-, and 3°-aldehydes revealed the electrophilicity of 1 in the aldehyde oxidation. A kinetic isotope effect experiment and reactivity of 1 toward cyclohexanecarboxaldehyde (CCA) analogues indicate that the reaction of 1 with aldehyde occurs through the rate-determining C-H bond activation at the formyl group. The reaction rate of 1 with CCA is correlated to the bond dissociation energy of the formyl group plotting a linear correlation with other aliphatic C-H bonds. Density functional theory calculations found that 1 electrostatically interacts with CCA at the pre-equilibrium state in which the C-H bond activation of the formyl group is performed as the most feasible pathway. Surprisingly, the rate-determining step is characterized as hydride transfer from CCA to 1, affording an (oxo)methylium intermediate. At the fundamental level, it is revealed that the hydride transfer is composed of H atom abstraction followed by a fast electron transfer. Catalytic reactions of aldehydes by 1 are also presented with a broad substrate scope. This novel mechanistic study gives better insights into the metal oxygen chemistry and would be prominently valuable for development of transition metal catalysts.

Structure and Reactivity of Nonporphyrinic Terminal Manganese(IV)-Hydroxide Complexes in the Oxidative Electrophilic Reaction

High-valent transition metal-hydroxide complexes have been proposed as essential intermediates in biological and synthetic catalytic reactions. In this work, we report the single-crystal X-ray structure and spectroscopic characteristics of a mononuclear nonporphyrinic Mn^IV-(OH) complex, [Mn^IV(Me₃-TPADP)(OH)(OCH₂CH₃)]²⁺ (2), using various physicochemical methods. Likewise, [Mn^IV(Me₃-TPADP)(OH)(OCH₂CF₃)]²⁺ (3), which is thermally stable at room temperature, was also synthesized and characterized spectroscopically. The Mn^IV-(OH) adducts are capable of performing oxidation reactions with external organic substrates such as C-H bond activation, sulfoxidation, and epoxidation. Kinetic studies, involving the Hammett correlation and kinetic isotope effect, and product analyses indicate that 2 and 3 exhibit electrophilic oxidative reactivity toward hydrocarbons. Density functional theory calculations support the assigned electronic structure and show that direct C-H bond activation of the Mn^IV-(OH) species is indeed possible.

Synthesis, characterization and catalytic activity of a mononuclear nonheme copper(II)-iodosylbenzene adduct

Iodosylbenzene (PhIO) and its derivatives have attracted significant attention due to their various applications in organic synthesis and biomimetic studies. For example, PhIO has been extensively used for generating high-valent metal-oxo species that have been regarded as key intermediates in diverse oxidative reactions in biological system. However, recent studies have shown that metal-iodosylbenzene adduct, known as a precursor of metal-oxo species, plays an important role in transition metal-catalyzed oxidation reactions. During last few decades, extensive investigations have been conducted on the synthesis and reactivity studies of metal-iodosylbenzene adducts with early and middle transition metals including manganese, iron, cobalt. Nevertheless, metal-iodosylbenzene adducts with late transition metals such as nickel, copper and zinc, still remains elusive. Herein, we report a novel copper(II)-iodosylbenzene adduct bearing a linear ligand composed of two pyridine rings and an ethoxyethanol side-chain, [Cu(OIPh)(HN₃O₂)]²⁺ (1). The copper(II)-iodosylbenzene adduct was characterized by several spectroscopic methods including UV-vis spectroscopy, electrospray ionization mass spectrometer (ESI MS), and electron paramagnetic resonance (EPR) combined with theoretical calculations. Interestingly, 1 can carry out the catalytic sulfoxidation reaction. In sulfoxidation reaction with thioanisole under catalytic reaction condition, not only two-electron but also four-electron oxidized products such sulfoxide and sulfone were yielded, respectively. However, 1 was not an efficient oxidant towards CH bond activation and epoxidation reactions due to the steric hindrance created by the intramolecular H-bonding interaction between HN₃O₂ ligand and iodosylbenzene moiety.

Hydride-Transfer Reaction to a Mononuclear Manganese(III) Iodosylarene Complex

Metal iodosylarene species have received interest because of their potential oxidative power as a catalyst. We present the first example of hydride-transfer reactions to a mononuclear manganese(III) iodosylbenzene complex, [Mn^III(TBDAP)(OIPh)(OH)]²⁺ (1; TBDAP = N,N-di-tert-butyl-2,11-diaza[3.3](2,6)pyridinophane), with dihydronicotinamide adenine dinucleotide (NADH) analogues. Kinetic studies show that hydride-transfer from the NADH analogues to 1 occurs via a proton-coupled electron transfer, followed by a rapid electron transfer.

Theoretical studies unveil the unusual bonding in oxygenation reactions involving cobalt(ii)-iodylarene complexes

DFT calculations reveal that the iodine of cobalt(ii)-iodylarene complexes acts as a directing group via halogen bonding interaction to substrates. A transient 3c-4e bond is formed during oxidation reactions to decrease the activation energy by electron delocalization. Dehydrogenation of dihydroantharacene proceeds via a novel concerted hydride transfer/proton transfer mechanism.

Unprecedented Reactivities of Highly Reactive Manganese(III)-Iodosylarene Porphyrins in Oxidation Reactions

We report that Mn(III)-iodosylarene porphyrins, [Mn^III(Porp)(^sArIO)]⁺, are capable of activating the C-H bonds of hydrocarbons, including unactivated alkanes such as cyclohexane, with unprecedented reactivities, such as a low kinetic isotope effect, a saturation behavior of reaction rates, and no electronic effect of porphyrin ligands on the reactivities of [Mn^III(Porp)(^sArIO)]⁺. In oxygen atom transfer (OAT) reactions, the sulfoxidation of para-X-substituted thioanisoles by [Mn^III(Porp)(^sArIO)]⁺ affords a very unusual behavior in the Hammett plot with the saturation behavior of reaction rates and no electronic effect of porphyrin ligands on reactivities. The reactivities and mechanisms of [Mn^III(Porp)(^sArIO)]⁺ are then compared with those of the corresponding Mn^IV(Porp)(O) complex. The present study reports the first example of highly reactive Mn(III)-iodosylarene porphyrins with unprecedented reactivities in C-H bond activation and OAT reactions.

Theoretical Study on the Structural-Function Relationship of Manganese(III)-Iodosylarene Adducts

Metal-iodosylarene complexes have been recently viewed as a second oxidant alongside of the well-known high-valent metal-oxo species. Extensive efforts have been exerted to unveil the structure-function relationship of various metal-iodosylarene complexes. In the present manuscript, density functional theoretical calculations were employed to investigate such relationship of a specific manganese-iodosylbenzene complex [Mn^III(TBDAP)(PhIO)(OH)]²⁺ (1). Our results fit the experimental observations and revealed new mechanistic findings. 1 acts as a stepwise 1e+1e oxidant in sulfoxidation reactions. Surprisingly, C-H bond activation of 9,10-dihydroanthracene (DHA) by 1 proceeds via a novel ionic hydride transfer/proton transfer (HT/PT) mechanism. As a comparison to 1, the electrophilicity of an iodosylbenzene monomer PhIO was investigated. PhIO performs concerted 2e-oxidations both in sulfoxidation and C-H activation. Hydroxylation of DHA by PhIO was found to proceed via a novel ionic and concerted proton-transfer/hydroxyl-rebound mechanism involving 2e-oxidation to form a transient carbonium species.

C-H Amination Mediated by Cobalt Organoazide Adducts and the Corresponding Cobalt Nitrenoid Intermediates

Treatment of (^ArL)CoBr (^ArL = 5-mesityl-1,9-(2,4,6-Ph₃C₆H₂)dipyrrin) with a stoichiometric amount of 1-azido-4-(tert-butyl)benzene N₃(C₆H₄-p-^tBu) furnished the corresponding four-coordinate organoazide-bound complex (^ArL)CoBr(N₃(C₆H₄-p-^tBu)). Spectroscopic and structural characterization of the complex indicated redox innocent ligation of the organoazide. Slow expulsion of dinitrogen (N₂) was observed at room temperature to afford a ligand functionalized product via a [3 + 2] annulation, which can be mediated by a high-valent nitrene intermediate such as a Co^III iminyl (^ArL)CoBr(^•N(C₆H₄-p-^tBu)) or Co^IV imido (^ArL)CoBr(N(C₆H₄-p-^tBu)) complex. The presence of the proposed intermediate and its viability as a nitrene group transfer reagent are supported by intermolecular C-H amination and aziridination reactivities. Unlike (^ArL)CoBr(N₃(C₆H₄-p-^tBu)), a series of alkyl azide-bound Co^II analogues expel N₂ only above 60 °C, affording paramagnetic intermediates that convert to the corresponding Co-imine complexes via α-H-atom abstraction. The corresponding N₂-released structures were observed via single-crystal-to-crystal transformation, suggesting formation of a Co-nitrenoid intermediate in solid-state. Alternatively, the alkyl azide-bound congeners supported by a more sterically accessible dipyrrinato scaffold ^tBuL (^tBuL = 5-mesityl-(1,9-di-tert-butyl)dipyrrin) facilitate intramolecular 1,3-dipolar cycloaddition as well as C-H amination to furnish 1,2,3-dihydrotriazole and substituted pyrrolidine products, respectively. For the C-H amination, we observe that the temperature required for azide activation varies depending on the presence of weak C-H bonds, suggesting that the alkyl azide adducts serve as viable species for C-H amination when the C-H bonds are (1) proximal to the azide moiety and (2) sufficiently weak to be activated.

Mechanistic dichotomies in redox reactions of mononuclear metal–oxygen intermediates

This review article focuses on various mechanistic dichotomies in redox reactions of metal–oxygen intermediates with the emphasis on understanding and controlling their redox reactivity from experimental and theoretical points of view.