Enhanced Stability and CO/Formate Selectivity of Plasma-Treated SnO x/AgO x Catalysts during CO2 Electroreduction

Crystalline-Amorphous Interfaces Engineering of CoO-InOx for Highly Efficient CO2 Electroreduction to CO

As a fundamental product of CO2 conversion through two-electron transfer, CO is used to produce numerous chemicals and fuels with high efficiency, which has broad application prospects. In this work, it has successfully optimized catalytic activity by fabricating an electrocatalyst featuring crystalline-amorphous CoO-InOx interfaces, thereby significantly expediting CO production. The 1.21%CoO-InOx consists of randomly dispersed CoO crystalline particles among amorphous InOx nanoribbons. In contrast to the same-phase structure, the unique CoO-InOx heterostructure provides plentiful reactive crystalline-amorphous interfacial sites. The Faradaic efficiency of CO (FECO) can reach up to 95.67% with a current density of 61.72 mA cm-2 in a typical H-cell using MeCN containing 0.5 M 1-Butyl-3-methylimidazolium hexafluorophosphate ([Bmim]PF6) as the electrolyte. Comprehensive experiments indicate that CoO-InOx interfaces with optimization of charge transfer enhance the double-layer capacitance and CO2 adsorption capacity. Theoretical calculations further reveal that the regulating of the electronic structure at interfacial sites not only optimizes the Gibbs free energy of *COOH intermediate formation but also inhibits HER, resulting in high selectivity toward CO.

Recent advances in dynamic reconstruction of electrocatalysts for carbon dioxide reduction

Electrocatalysts undergo structural evolution under operating electrochemical CO2 reduction reaction (CO2RR) conditions. This dynamic reconstruction correlates with variations in CO2RR activity, selectivity, and stability, posing challenges in catalyst design for electrochemical CO2RR. Despite increased research on the reconstruction behavior of CO2RR electrocatalysts, a comprehensive understanding of their dynamic structural evolution under reaction conditions is lacking. This review summarizes recent developments in the dynamic reconstruction of catalysts during the CO2RR process, covering fundamental principles, modulation strategies, and in situ/operando characterizations. It aims to enhance understanding of electrocatalyst dynamic reconstruction, offering guidelines for the rational design of CO2RR electrocatalysts.

Sn-based film electrodeposited on Ag foil for selective electrochemical CO2 reduction to CO

Electrochemical CO2 reduction (ECR) to valuable chemicals and fuels using renewable energy is a promising way to reduce carbon emission. Herein, Sn-based films were electrodeposited on Ag foil surfaces (Sn/Ag-y) for selective ECR to CO, where y represented the concentration of SnCl2 in the electrodeposition bath. The Sn/Ag-20 electrode achieved a high CO faradaic efficiency of 96.0% with a current density of 69.3 mA cm-2. The enhanced catalytic performance could be attributed to appropriate superficial properties, large electrochemical active surface areas, low charge transfer resistance, efficient stabilization capacity of the CO2˙- intermediates, and suitable combination with electrolytes.

In-Situ Characterization Techniques for Mechanism Studies of CO2 Hydrogenation

The paramount concerns of global warming, fossil fuel depletion, and energy crises have prompted the need of hydrocarbons productions via CO2 conversion. In order to achieve global carbon neutrality, much attention needs to be diverted towards CO2 management. Catalytic hydrogenation of CO2 is an exciting opportunity to curb the increasing CO2 and produce value-added products. However, the comprehensive understanding of CO2 hydrogenation is still a matter of discussion due to its complex reaction mechanism and involvement of various species. This review comprehensively discusses three processes: reverse water gas shift (RWGS) reaction, modified Fischer Tropsch synthesis (MFTS), and methanol-mediated route (MeOH) for CO2 hydrogenation to hydrocarbons. Along with analysing the reaction pathways, it is also very important to understand the real-time evolvement of catalytic process and reaction intermediates by employing in-situ characterization techniques under actual reaction conditions. Subsequently, in second part of this review, we provided a systematic analysis of advancements in in-situ techniques aimed to monitor the evolution of catalysts during CO2 reduction process. The section also highlights the key components of in-situ cells, their working principles, and applications in identifying reaction mechanisms for CO2 hydrogenation. Finally, by reviewing respective achievements in the field, we identify key gaps and present some future directions for CO2 hydrogenation and in-situ studies.

Catalysis for Carbon-Circularity: Emerging Concepts and Role of Inorganic Chemistry

Carbon circularity is crucial for achieving a circular economy but has wider implications and impacts with respect to the circularity of materials. It has an in-depth transformative effect on the economy. CO2 recycling is a critical component for this objective, with catalysis and inorganic chemistry playing a determining role in achieving this challenge. This concept paper presents some examples, as food for thought, of unconventional aspects in developing thermal and electro/photocatalysts for recycling CO2. The aspects discussed regard designing novel materials for CO2 thermo- or electro-conversion and developing novel nanostructured electrodes.

Designing and Engineering Atomically Dispersed Metal Catalysts for CO2 to CO Conversion: From Single to Dual Metal Sites

The electrochemical CO2 reduction reaction (CO2 RR) is a promising approach to achieving sustainable electrical-to-chemical energy conversion and storage while decarbonizing the emission-heavy industry. The carbon-supported, nitrogen-coordinated, and atomically dispersed metal sites are effective catalysts for CO generation due to their high activity, selectivity, and earth abundance. Here, we discuss progress, challenges, and opportunities for designing and engineering atomic metal catalysts from single to dual metal sites. Engineering single metal sites using a nitrogen-doped carbon model was highlighted to exclusively study the effect of carbon particle sizes, metal contents, and M-N bond structures in the form of MN4 moieties on catalytic activity and selectivity. The structure-property correlation was analyzed by combining experimental results with theoretical calculations to uncover the CO2 to CO conversion mechanisms. Furthermore, dual-metal site catalysts, inheriting the merits of single-metal sites, have emerged as a new frontier due to their potentially enhanced catalytic properties. Designing optimal dual metal site catalysts could offer additional sites to alter the surface adsorption to CO2 and various intermediates, thus breaking the scaling relationship limitation and activity-stability trade-off. The CO2 RR electrolysis in flow reactors was discussed to provide insights into the electrolyzer design with improved CO2 utilization, reaction kinetics, and mass transport.

Reversible Structural Evolution of Metal-Nitrogen-Doped Carbon Catalysts During CO2 Electroreduction: An Operando X-ray Absorption Spectroscopy Study

Electrochemical CO2 reduction (CO2 RR) is a rising technology, aiming to reduce the energy sector dependence on fossil fuels and to produce carbon-neutral raw materials. Metal-nitrogen-doped carbons (M-N-C) are emerging, cost-effective catalysts for this reaction; however, their long-term stability is a major issue. To overcome this, understanding their structural evolution is crucial, requiring systematic in-depth operando studies. Here a series of M-N-C catalysts (M = Fe, Sn, Cu, Co, Ni, Zn) is investigated using operando X-ray absorption spectroscopy. It is found that the Fe-N-C and Sn-N-C are prone to oxide clusters formation even before CO2 RR. In contrast, the respective metal cations are singly dispersed in the as-prepared Cu-N-C, Co-N-C, Ni-N-C, and (Zn)-N-C. During CO2 RR, metallic clusters/nanoparticles reversibly formed in all catalysts, except for the Ni-N-C. This phenomenon, previously observed only in Cu-N-C, thus is ubiquitous in M-N-C catalysts. The competition between M-O and M-N interactions is an important factor determining the mobility of metal species in M-N-C. Specifically, the strong interaction between the Ni centers and the N-functional groups of the carbon support results in higher stability of the Ni single-sites, leading to the excellent performance of Ni-N-C in the CO2 to CO conversion, in comparison to other transition metals.

Fundamentals and Challenges of Engineering Charge Polarized Active Sites for CO2 Photoreduction toward C2 Products

ConspectusGlobal warming and climatic deterioration are partly caused by carbon dioxide (CO2) emission. Given this, CO2 reduction into valuable carbonaceous fuels is a win-win route to simultaneously alleviate the greenhouse effect and the energy crisis, where CO2 reduction into hydrocarbon fuels by solar energy may be a potential strategy. Up to now, most of the current photocatalysts photoconvert CO2 to C1 products. It is extremely difficult to achieve production of C2 products, which have higher economic value and energy density, due to the kinetic challenge of C-C coupling of the C1 intermediates. Therefore, to realize CO2 photoreduction to C2 fuels, design of high-activity photocatalysts to expedite the C-C coupling is significant. Besides, the current mechanism for CO2 photoreduction toward C2 fuels is usually uncertain, which is possibly attributed to the following two reasons: (1) It is arduous to determine the actual catalytic sites for the C-C coupling step. (2) It is hard to monitor the low-concentration active intermediates during the multielectron transfer step.Most traditional metal-based photocatalysts usually possess charge balanced active sites that have the same charge density. In this aspect, the neighboring C1 intermediates may also show the same charge distribution, which would lead to dipole-dipole repulsion, thus preventing C-C coupling for producing C2 fuels. By contrast, photocatalysts with charge polarized active sites possess obviously different charge distributions in the adjacent C1 intermediates, which can effectively suppress the electrostatic repulsion to steer the C-C coupling. Based on this analysis, higher asymmetric charge density on the active sites would be more beneficial to anchoring between the adjacent intermediates and active atoms in catalysts, which can boost C-C coupling.In this Account, we summarize various strategies, including vacancy engineering, doping engineering, loading engineering, and heterojunction engineering, for tailoring charge polarized active sites to boost the C-C coupling for the first time. Also, we overview diverse in situ characterization technologies, such as in situ X-ray photoelectron spectroscopy, in situ Raman spectroscopy, and in situ Fourier transform infrared spectroscopy, for determining charge polarized active sites and monitoring reaction intermediates, helping to reveal the internal catalytic mechanism of CO2 photoreduction toward C2 products. We hope this Account may help readers to understand the crucial function of charge polarized active sites during CO2 photoreduction toward C2 products and provide guidance for designing and preparing highly active catalysts for photocatalytic CO2 reduction.

In-modified Sn-MOFs with high catalytic performance in formate electrosynthesis from aqueous carbon dioxide

Electrochemical reduction of carbon dioxide (CO2ER) has become an effective solution to relieve the energy crisis and tackle climate change. In this study, a series of tin-based organic frameworks modified by In (Sn-MOF/Inx) were successfully synthesized via a simple hydrothermal method and explored for high formate-selective CO2ER. The pure Sn-MOF exhibits maximum formate selectivity with a faradaic efficiency (FEformate) of approximately 85.0% and a current density of 15 mA cm-2 at -1.16 VRHE, while the In (6%)-modified Sn-MOF (Sn-MOF/In6) delivers a much higher maximum FEformate (around 97.5%) and a current density of 16 mA cm-2 at -0.96 VRHE. Remarkably, the Sn-MOF/In6 exhibits a significantly larger specific surface area (183.3 m2 g-1) compared to the Sn-MOF (65.2 m2 g-1). These findings indicate that introducing In, an alien element with a slightly different outer orbital electron number from that of Sn, can significantly boost the selectivity and activity for CO2ER to formate. This study presents an efficient way to modify MOF catalysts through a well-designed introducing process.

Sn-Ag Synergistic Effect Enhances High-Rate Electrocatalytic CO2 -to-Formate Conversion on Porous Poly(Ionic Liquid) Support

The electrocatalytic transformation of carbon dioxide (CO₂ ) to formate is a promising route for highly efficient conversion and utilization of CO₂ gas, due to the low production cost and the ease of storage of formate. In this work, porous poly(ionic liquid) (PPIL)-based tin-silver (Sn-Ag) bimetallic hybrids (PPIL^m -Sn_x Ag_{10- x} ) are prepared for high-performance formate electrolytic generation. Under optimal conditions, an excellent formate Faradaic efficiency of 95.5% with a high partial current density of 214.9 mA cm^-2 is obtained at -1.03 V (vs reversible hydrogen electrode). Meanwhile, the high selectivity of formate (>≈83%) is maintained in a wide potential range (>630 mV). Mechanistic studies demonstrate that the presence of Ag-species is vital for the formation, maintenance, and high dispersion of tetravalent Sn(IV)-species, which accounts for the active sites for CO₂ -to-formate conversion. Further, the introduction of Ag-species significantly enhances the activity by increasing the electron density near the Fermi energy level.

Recent Progress in Surface-Defect Engineering Strategies for Electrocatalysts toward Electrochemical CO2 Reduction: A Review

Climate change, caused by greenhouse gas emissions, is one of the biggest threats to the world. As per the IEA report of 2021, global CO2 emissions amounted to around 31.5 Gt, which increased the atmospheric concentration of CO2 up to 412.5 ppm. Thus, there is an imperative demand for the development of new technologies to convert CO2 into value-added feedstock products such as alcohols, hydrocarbons, carbon monoxide, chemicals, and clean fuels. The intrinsic properties of the catalytic materials are the main factors influencing the efficiency of electrochemical CO2 reduction (CO2-RR) reactions. Additionally, the electroreduction of CO2 is mainly affected by poor selectivity and large overpotential requirements. However, these issues can be overcome by modifying heterogeneous electrocatalysts to control their morphology, size, crystal facets, grain boundaries, and surface defects/vacancies. This article reviews the recent progress in electrochemical CO2 reduction reactions accomplished by surface-defective electrocatalysts and identifies significant research gaps for designing highly efficient electrocatalytic materials.

Neural Network Accelerated Investigation of the Dynamic Structure-Performance Relations of Electrochemical CO2 Reduction over SnO x Surfaces

Heterogeneous catalysts, especially metal oxides, play a curial role in improving energy conversion efficiency and production of valuable chemicals. However, the surface structure at the atomic level and the nature of active sites are still ambiguous due to the dynamism of surface structure and difficulty in structure characterization under electrochemical conditions. This paper describes a strategy of the multiscale simulation to investigate the SnO _x reduction process and to build a structure-performance relation of SnO _x for CO₂ electroreduction. Employing high-dimensional neural network potential accelerated molecular dynamics and stochastic surface walking global optimization, coupled with density functional theory calculations, we propose that SnO₂ reduction is accompanied by surface reconstruction and charge density redistribution of active sites. A regulatory factor, the net charge, is identified to predict the adsorption capability for key intermediates on active sites. Systematic electronic analyses reveal the origin of the interaction between the adsorbates and the active sites. These findings uncover the quantitative correlation between electronic structure properties and the catalytic performance of SnO _x so that Sn sites with moderate charge could achieve the optimally catalytic performance of the CO₂ electroreduction to formate.

Nanostructure Engineering of Sn-Based Catalysts for Efficient Electrochemical CO2 Reduction

Excessive anthropogenic CO₂ emission has caused a series of ecological and environmental issues, which threatens mankind's sustainable development. Mimicking the natural photosynthesis process (i.e., artificial photosynthesis) by electrochemically converting CO₂ into value-added products is a promising way to alleviate CO₂ emission and relieve the dependence on fossil fuels. Recently, Sn-based catalysts have attracted increasing research attentions due to the merits of low price, abundance, non-toxicity, and environmental benignancy. In this review, the paradigm of nanostructure engineering for efficient electrochemical CO₂ reduction (ECO₂ R) on Sn-based catalysts is systematically summarized. First, the nanostructure engineering of size, composition, atomic structure, morphology, defect, surficial modification, catalyst/substrate interface, and single-atom structure, are systematically discussed. The influence of nanostructure engineering on the electronic structure and adsorption property of intermediates, as well as the performance of Sn-based catalysts for ECO₂ R are highlighted. Second, the potential chemical state changes and the role of surface hydroxides on Sn-based catalysts during ECO₂ R are introduced. Third, the challenges and opportunities of Sn-based catalysts for ECO₂ R are proposed. It is expected that this review inspires the further development of highly efficient Sn-based catalysts, meanwhile offer protocols for the investigation of Sn-based catalysts.

Electrodeposited Sn-Cu@Sn dendrites for selective electrochemical CO2 reduction to formic acid

Large-scale CO₂ electrolysis can be applied to store renewable energy in chemicals. Recent developments in gas diffusion electrodes now enable a commercially relevant current density. However, the low selectivity of the CO₂ reduction reaction (CO₂RR) still hinders practical applications. The selectivity of the CO₂RR highly depends on the electrocatalyst. Sn catalysts are considered promising cathode materials for the production of formic acid. The selectivity of Sn catalysts can be regulated by controlling their morphology or alloying them with secondary metals. Herein, we enhanced the selectivity of CO₂ reduction to formic acid by synthesizing Sn-Cu@Sn dendrites that have a core@shell architecture. The Sn-Cu@Sn dendrites were prepared by a scalable electro-deposition method. The electronic structure was modified to suppress a reaction pathway for CO production on the Sn surface. Notably, the Sn shell inhibited the cathodic corrosion of Cu during the CO₂RR. On a gas diffusion electrode, the Sn-Cu@Sn dendrites exhibited 84.2% faraday efficiency to formic acid for 120 h with high stability.

Effects of the Catalyst Dynamic Changes and Influence of the Reaction Environment on the Performance of Electrochemical CO2 Reduction

Electrochemical reduction of carbon dioxide (CO₂ ) is substantially researched due to its potential for storing intermittent renewable electricity and simultaneously helping mitigating the pressing CO₂ emission concerns. The major challenge of electrochemical CO₂ reduction lies on having good controls of this reaction due to its complicated reaction networks and its unusual sensitivity to the dynamic changes of the catalyst structure (chemical states, compositions, facets and morphology, etc.), and to the non-catalyst components at the electrode/electrolyte interface, in another word the reaction environments. To date, a comprehensive analysis on the interplays between the above catalyst-dynamic-changes/reaction environments and the CO₂ reduction performance is rare, if not none. In this review, the catalyst dynamic changes observed during the catalysis are discussed based on the recent reports of electrochemical CO₂ reduction. Then, the above dynamic changes are correlated to their effects on the catalytic performance. The influences of the reaction environments on the performance of CO₂ reduction are also discussed. Finally, some perspectives on future investigations are offered with the aim of understanding the origins of the effects from the catalyst dynamic changes and the reaction environments, which will allow one to better control the CO₂ reduction toward the desired products.

Electrodeposition: An efficient method to fabricate self-supported electrodes for electrochemical energy conversion systems

The development of electrocatalysts for energy conversion systems is essential for alleviating environmental problems and producing useful energy sources as alternatives to fossil fuels. Improving the catalytic performance and stability of electrocatalysts is a major challenge in the development of energy conversion systems. Moreover, understanding their electrode structure is important for enhancing the energy efficiency. Recently, binder-free self-supported electrodes have been investigated because the seamless contact between the electrocatalyst and substrate minimizes the contact resistance as well as facilitates fast charge transfer at the catalyst/substrate interface and high catalyst utilization. Electrodeposition is an effective and facile method for fabricating self-supported electrodes in aqueous solutions under mild conditions. Facile fabrication without a polymer binder and controlability of the compositional and morphological properties of the electrocatalyst make electrodeposition methods suitable for enhancing the performance of energy conversion systems. Herein, we summarize recent research on self-supported electrodes fabricated by electrodeposition for energy conversion reactions, particularly focusing on cathodic reactions of electrolyzer system such as hydrogen evolution, electrochemical CO2 reduction, and electrochemical N2 reduction reactions. The deposition conditions, morphological and compositional properties, and catalytic performance of the electrocatalyst are reviewed. Finally, the prospective directions of electrocatalyst development for energy conversion systems are discussed.

Understanding the Effect of *CO Coverage on C-C Coupling toward CO2 Electroreduction

Cu-based tandem nanocrystals have been widely applied to produce multicarbon (C₂₊) products via enhancing CO intermediate (*CO) coverage toward CO₂ electroreduction. Nevertheless, it remains ambiguous to understand the intrinsic correlation between *CO coverage and C-C coupling. Herein, we constructed a tandem catalyst via coupling CoPc with the gas diffusion electrode of Cu (GDE of Cu-CoPc). A faradaic efficiency for C₂₊ products of 82% was achieved over a GDE of Cu-CoPc at an applied current density of 480 mA cm^-2 toward CO₂ electroreduction, which was 1.8 times as high as that over the GDE of Cu. Based on in situ experiments and density functional theory calculations, we revealed that the high *CO coverage induced by CO-generating CoPc promoted the local enrichment of *CO with the top adsorption mode, thus reducing the energy barrier for the formation of OCCO intermediate. This work provides an in-depth understanding of the surface coverage-dependent mode-specific C-C coupling mechanism toward CO₂ electroreduction.

Rational-Designed Principles for Electrochemical and Photoelectrochemical Upgrading of CO2 to Value-Added Chemicals

The chemical transformation of carbon dioxide (CO2 ) has been considered as a promising strategy to utilize and further upgrade it to value-added chemicals, aiming at alleviating global warming. In this regard, sustainable driving forces (i.e., electricity and sunlight) have been introduced to convert CO2 into various chemical feedstocks. Electrocatalytic CO2 reduction reaction (CO2 RR) can generate carbonaceous molecules (e.g., formate, CO, hydrocarbons, and alcohols) via multiple-electron transfer. With the assistance of extra light energy, photoelectrocatalysis effectively improve the kinetics of CO2 conversion, which not only decreases the overpotentials for CO2 RR but also enhances the lifespan of photo-induced carriers for the consecutive catalytic process. Recently, rational-designed catalysts and advanced characterization techniques have emerged in these fields, which make CO2 -to-chemicals conversion in a clean and highly-efficient manner. Herein, this review timely and thoroughly discusses the recent advancements in the practical conversion of CO2 through electro- and photoelectrocatalytic technologies in the past 5 years. Furthermore, the recent studies of operando analysis and theoretical calculations are highlighted to gain systematic insights into CO2 RR. Finally, the challenges and perspectives in the fields of CO2 (photo)electrocatalysis are outlined for their further development.

Recent Development of Electrocatalytic CO2 Reduction Application to Energy Conversion

Carbon dioxide (CO₂ ) emission has caused greenhouse gas pollution worldwide. Hence, strengthening CO₂ recycling is necessary. CO₂ electroreduction reaction (CRR) is recognized as a promising approach to utilize waste CO₂ . Electrocatalysts in the CRR process play a critical role in determining the selectivity and activity of CRR. Different types of electrocatalysts are introduced in this review: noble metals and their derived compounds, transition metals and their derived compounds, organic polymer, and carbon-based materials, as well as their major products, Faradaic efficiency, current density, and onset potential. Furthermore, this paper overviews the recent progress of the following two major applications of CRR according to the different energy conversion methods: electricity generation and formation of valuable carbonaceous products. Considering electricity generation devices, the electrochemical properties of metal-CO₂ batteries, including Li-CO₂ , Na-CO₂ , Al-CO₂ , and Zn-CO₂ batteries, are mainly summarized. Finally, different pathways of CO₂ electroreduction to carbon-based fuels is presented, and their reaction mechanisms are illustrated. This review provides a clear and innovative insight into the entire reaction process of CRR, guiding the new electrocatalysts design, state-of-the-art analysis technique application, and reaction system innovation.

Recent Advances in Interface Engineering for Electrocatalytic CO2 Reduction Reaction

Electrocatalytic CO₂ reduction reaction (CO₂RR) can store and transform the intermittent renewable energy in the form of chemical energy for industrial production of chemicals and fuels, which can dramatically reduce CO₂ emission and contribute to carbon-neutral cycle. Efficient electrocatalytic reduction of chemically inert CO₂ is challenging from thermodynamic and kinetic points of view. Therefore, low-cost, highly efficient, and readily available electrocatalysts have been the focus for promoting the conversion of CO₂. Very recently, interface engineering has been considered as a highly effective strategy to modulate the electrocatalytic performance through electronic and/or structural modulation, regulations of electron/proton/mass/intermediates, and the control of local reactant concentration, thereby achieving desirable reaction pathway, inhibiting competing hydrogen generation, breaking binding-energy scaling relations of intermediates, and promoting CO₂ mass transfer. In this review, we aim to provide a comprehensive overview of current developments in interface engineering for CO₂RR from both a theoretical and experimental standpoint, involving interfaces between metal and metal, metal and metal oxide, metal and nonmetal, metal oxide and metal oxide, organic molecules and inorganic materials, electrode and electrolyte, molecular catalysts and electrode, etc. Finally, the opportunities and challenges of interface engineering for CO₂RR are proposed.

In Situ Characterization for Boosting Electrocatalytic Carbon Dioxide Reduction

The electrocatalytic reduction of carbon dioxide into organic fuels and feedstocks is a fascinating method to implement the sustainable carbon cycle. Thus, a rational design of advanced electrocatalysts and a deep understanding of reaction mechanisms are crucial for the complex reactions of carbon dioxide reduction with multiple electron transfer. In situ and operando techniques with real-time monitoring are important to obtain deep insight into the electrocatalytic reaction to reveal the dynamic evolution of electrocatalysts' structure and composition under experimental conditions. In this paper, the reaction pathways for the CO₂ reduction reaction (CO₂ RR) in the generation of various products (e.g., C₁ and C₂ ) via the proposed mechanisms are introduced. Moreover, recent advances in the development and applications of in situ and operando characterization techniques, from the basic working principles and in situ cell structure to detailed applications are discussed. Suggestions and future directions of in situ/operando analysis are also addressed.

Highly Efficient CO2 Electroreduction to Methanol through Atomically Dispersed Sn Coupled with Defective CuO Catalysts

Using renewable electricity to drive CO₂ electroreduction is an attractive way to achieve carbon-neutral energy cycle and produce value-added chemicals and fuels. As an important platform molecule and clean fuel, methanol requires 6-electron transfer in the process of CO₂ reduction. Currently, CO₂ electroreduction to methanol suffers from poor efficiency and low selectivity. Herein, we report the first work to design atomically dispersed Sn site anchored on defective CuO catalysts for CO₂ electroreduction to methanol. It exhibits high methanol Faradaic efficiency (FE) of 88.6 % with a current density of 67.0 mA cm^-2 and remarkable stability in a H-cell, which is the highest FE(methanol) with such high current density compared with the results reported to date. The atomic Sn site, adjacent oxygen vacancy and CuO support cooperate very well, leading to higher double-layer capacitance, larger CO₂ adsorption capacity and lower interfacial charge transfer resistance. Operando experiments and density functional theory calculations demonstrate that the catalyst is beneficial for CO₂ activation via decreasing the energy barrier of *COOH dissociation to form *CO. The obtained key intermediate *CO is then bound to the Cu species for further reduction, leading to high selectivity toward methanol.

Bi-Sn Oxides for Highly Selective CO2 Electroreduction to Formate in a Wide Potential Window

The electroreduction of CO₂ into the highly value-added fuel formic acid (HCOOH) has been considered an ideal approach to convert renewable energy and mitigate environmental crisis. SnO₂ electrode is one of the promising candidates to electrocatalytically convert CO₂ to HCOOH, but its poor stability limits its future development and application. In this study, highly stable SnO₂ /Bi₂ O₃ oxide catalysts are obtained by distributing SnO₂ nanoparticles on the surface of Bi₂ O₃ sheets. The XPS spectra revealed an interfacial electronic transportation from Bi₂ O₃ sheets to SnO₂ nanoparticles, which made SnO₂ rich of electrons. The strong interfacial interaction protected the active sites of SnO₂ from self-reduction in CO₂ electroreduction reaction (CO₂ RR), stabilizing SnO₂ species in the composite catalyst even after long-term usage. Calculations based on density functional theory signified that the presence of Bi₂ O₃ favored the adsorption of HCOO* intermediate, improved the CO₂ conversion into HCOOH on SnO₂ /Bi₂ O₃ interface. As a result, the SnO₂ /Bi₂ O₃ catalyst attained high performance on CO₂ RR (the highest FE C 1 value of 90 % at -1.0 V vs. RHE), suppressing H₂ evolution reaction (HER) at high potentials. In particular, the selectivity of HCOOH remained above 76 % in a wide potential window (from -1.0 to -1.4 V vs. RHE) and a long duration (12 h).

Self-supported mesoscopic tin oxide nanofilms for electrocatalytic reduction of carbon dioxide to formate

Here we report a self-supported SnO₂ nanofilm prepared by a robust electrochemical process as an electrocatalyst for the CO₂ reduction reaction. The SnO₂ film had a large surface area originating from its nano-architecture and manifested high selectivity toward formate (over 60%), which resulted in CO₂-to-formate current density up to 33.66 mA cm^-2 that is among the state-of-the-art. We unveiled that the high performance of the SnO₂ nanofilm is attributable to the presence of a metastable oxide under reductive conditions in addition to the abovementioned advantages.

Applications of Plasma-Assisted Systems for Advanced Electrode Material Synthesis and Modification

Research on advanced electrode materials (AEMs) has been explosive for the past decades and constantly promotes the development of batteries, supercapacitors, electrocatalysis, and photovoltaic applications. However, traditional preparation and modification methods can no longer meet the increasing requirements of some AEMs because some of the special reactions are thermodynamically and/or kinetically unfavorable and thus need harsh conditions. Among various recently developed advanced materials synthesis and modification routes, the plasma-assisted (PA) method has received increasing attention because of its unique and different "species reactivity" nature, as well as its wider and adjustable operating conditions. In this Spotlight on Applications, we highlight some recent developments and describe our recent progress by applying PA systems in the synthesis and modification of AEMs, including direct processing, PA deposition, and plasma milling (P-milling). The mechanisms of how plasma works for specific reactions are reviewed and discussed. It is shown that the PA technique has become a powerful and efficient tool in the following areas, including but not limited to materials synthesis, doping, surface modification, and functionalization. Finally, the prospect and challenges are also proposed for AEM preparation and modification using PA systems. This article aims to provide up-to-date information about the progress of PA technology in the fields of chemistry and materials science.

Electrocatalysis for CO2 conversion: from fundamentals to value-added products

This timely and comprehensive review mainly summarizes advances in heterogeneous electroreduction of CO₂: from fundamentals to value-added products.