Unexpected Precatalyst σ-Ligand Effects in Phenoxyimine Zr-Catalyzed Ethylene/1-Octene Copolymerizations

Zirconium and Hafnium Complexes Bearing Tridentate ONN-Ligands: Extremely High Activity toward Ethylene (Co)Polymerization

The pursuit of high-performance catalysts in the realm of polyolefins is a constant goal. In this study, a range of zirconium (1-ZrCl3, 2-ZrCl3, 3-ZrCl4, 12-Zr) and hafnium (1-HfCl3, 12-Hf) complexes featuring phenoxy-imine-amine ONN-ligands (2,6-R2-C6H3-NH-C6H4-N═CH-C6H2-3,5-tBu2-OH; 1-L: R = H; 2-L: R = F; 3-L: R = iPr) were synthesized and characterized using NMR spectroscopy, as well as single-crystal X-ray diffraction for 2-ZrCl3, 3-ZrCl4, and 12-Zr. These Zr and Hf complexes exhibited remarkable efficiency for ethylene homopolymerization and copolymerization with 1-octene when paired with MAO as the cocatalyst. Notably, the Zr complexes outperformed the Hf complexes with the same ligand, underscoring the substantial impact of the metal center on catalytic performance. The substituents and coordination modes of the ligands also exerted significant influence on the catalytic behavior, affecting both the activity and properties of the resulting polymers. Particularly noteworthy was the exceptional activity of 1-ZrCl3, achieving activity as high as 6.30 × 108 g(PE)·mol-1(Zr)·h-1 for ethylene homopolymerization and generating bi- or multimodal distribution polyethylene. The activation of 1-ZrCl3 by 5 or 20 equiv of d-MAO afforded a dinuclear Zr complex bridged by two chlorides (μ-Cl2-(1-ZrCl2)2), which was analyzed and confirmed by in situ 1H NMR spectroscopy and single-crystal X-ray diffraction.

The Highly Controlled and Efficient Polymerization of Ethylene

The highly controlled and efficient polymerization of ethylene is a very attractive but challenging target. Herein we report on a Coordinative Chain Transfer Polymerization catalyst, which combines a high degree of control and very high activity in ethylene oligo- or polymerization with extremely high chain transfer agent (triethylaluminum) to catalyst ratios (catalyst economy). Our Zr catalyst is long living and temperature stable. The chain length of the polyethylene products increases over time under constant ethylene feed or until a certain volume of ethylene is completely consumed to reach the expected molecular weight. Very high activities are observed if the catalyst elongates 60 000 or more alkyl chains and the polydispersity of the strictly linear polyethylene materials obtained are very low. The key for the combination of high control and efficiency seems to be a catalyst stabilized by only one strongly bound monoanionic N-ligand.

Dinuclear Group 4 Metal Complexes Bearing Anthracene-Bridged Bifunctional Amido-Ether Ligands: Remarkable Metal Effect and Cooperativity toward Ethylene/1-Octene Copolymerization

Two types of bifunctional amido-ether ligands (syn-L and anti-L) with the rigid anthracene skeleton were designed to support dinuclear group 4 metal complexes. All organic ligands and organometallic complexes (syn-M₂ and anti-M₂; M = Hf, Zr, and Ti) were fully characterized by ¹H and ¹³C NMR spectroscopies and elemental analyses. The anti-Hf₂ complex showed two confirmations at room temperature with C₂-symmetry or S₂-symmetry that can inter-exchange, as indicated by VT NMR, while only a C₂-symmetric isomer was observed for syn-Hf₂ complex at room temperature. However, for Zr and Ti analogues, both syn and anti complexes exhibited only one conformation at room temperature. The molecular structures of complexes syn-Hf₂, anti-Hf₂, and syn-Ti₂ in the solid state were further determined by single-crystal X-ray diffraction, revealing the distances between two metal centers in syn-M₂ from 7.138 Å (syn-Ti₂) to 7.321 Å (syn-Hf₂) but a much farther separation in anti-M₂ (8.807 Å in C₂-symmetric anti-Hf₂). The mononuclear complex (2-CH₃O-C₆H₄-N-C₁₄H₉)Zr(NMe₂)₃ (mono-Zr₁) was also prepared for control experiments. In the presence of alkyl aluminum (AlEt₃) as the alkylating agent and trityl borate ([Ph₃C][B(C₆F₅)₄]) as the co-catalyst, all metal complexes were tested for copolymerization of ethylene with 1-octene at high temperature (130 °C). The preliminary polymerization results revealed that the activity was highly dependent upon the nature of metal centers, and syn-Zr₂ showed the highest activity of 9600 kg(PE)·mol^-1 (Zr)·h^-1, which was about 17- and 2.2-fold higher than those of syn-Hf₂ and syn-Ti₂, respectively. Benefitting from both steric proximity and electronical interaction of two metal centers, syn-Zr₂ exhibited significant cooperativity in comparison to anti-Zr₂ and mono-Zr₁, with regard to activity and molecular weight and 1-octene incorporation of resultant copolymers.

A tridentate phenoxy-phosphine (POP) divalent chromium complex and its reactivities in olefin polymerization

We reported the synthesis and characterization of a Cr(ii) complex based on a tridentate phenoxy-phosphine ligand and studied its reactivities in ethylene and norbornene homopolymerization and ethylene copolymerization with norbornene or 1-octene.

Effect of Activator and Outgoing Ligand Nature on the Catalytic Behavior of Bis(phenoxy-imine) Ti(IV) Complexes in the Polymerization of Ethylene and Its Copolymerization with Higher Olefins

A series of bis(phenoxy-imine) (FI) titanium(IV) and zirconium(IV) complexes have been synthesized. The effect of the nature of the activator (MAO, combinations EtnAlCl3-n + Bu2Mg and iBu3Al + [Ph3C]+[B(C6F5)4]-) on the catalytic activity and properties of the resulting polymers was studied. It was found that Ti-Fi complexes, despite the nature of the outgoing ligands (Cl or iPrO) in the presence of Al/Mg activators, effectively catalyze the polymerization of ethylene (with the formation of UHMWPE); copolymerization of ethylene with 1-octene (with the formation of ultra-high molecular weight copolymers); and the ternary copolymerization of ethylene, propylene and 5-vinyl-2-norbornene (with the formation of polyolefin elastomers). It has been shown that Zr-FI complexes are not activated by these Al/Mg compositions. The resulting UHMWPE can be processed by a solventless method into high-strength and high-modulus oriented films; however, their mechanical characteristics do not exceed those obtained using MAO.

Zirconium-Based Catalysts in Organic Synthesis

Zirconium is a silvery-white malleable and ductile metal at room temperature with a crustal abundance of 162 ppm. Its compounds, showing Lewis acidic behavior and high catalytic performance, have been recognized as a relatively cheap, low-toxicity, stable, green, and efficient catalysts for various important organic transformations. Commercially available inorganic zirconium chloride was widely applied as a catalyst to accelerate amination, Michael addition, and oxidation reactions. Well-designed zirconocene perfluorosulfonates can be applied in allylation, acylation, esterification, etc. N-Chelating oganozirconium complexes accelerate polymerization, hydroaminoalkylation, and CO₂ fixation efficiently. In this review, the applications of both commercially available and synthesized zirconium catalysts in organic reactions in the last 5 years are highlighted. Firstly, the properties and application of zirconium and its compounds are simply introduced. After presenting the superiority of zirconium compounds, their applications as catalysts to accelerate organic transformations are classified and presented in detail. On the basis of different kinds of zirconium catalysts, organic reactions accelerated by inorganic zirconium catalysts, zirconium catalysts bearing Cp, and organozirconium catalysts without Cp are summarized, and the plausible reaction mechanisms are presented if available.

Zr(IV) Catalyst for the Ring-Opening Copolymerization of Anhydrides (A) with Epoxides (B), Oxetane (B), and Tetrahydrofurans (C) to Make ABB- and/or ABC-Poly(ester-alt-ethers)

Poly(ester-alt-ethers) can combine beneficial ether linkage flexibility and polarity with ester linkage hydrolysability, furnishing fully degradable polymers. Despite their promising properties, this class of polymers remains underexplored, in part due to difficulties in polymer synthesis. Here, a catalyzed copolymerization using commercially available monomers, butylene oxide (BO)/oxetane (OX), tetrahydrofuran (THF), and phthalic anhydride (PA), accesses a series of well-defined poly(ester-alt-ethers). A Zr(IV) catalyst is reported that yields polymer repeat units comprising a ring-opened PA (A), followed by two ring-opened cyclic ethers (B/C) (-ABB- or -ABC-). It operates with high polymerization control, good rate, and successfully enchains epoxides, oxetane, and/or tetrahydrofurans, providing a straightforward means to moderate the distance between ester linkages. Kinetic analysis of PA/BO copolymerization, with/without THF, reveals an overall second-order rate law: first order in both catalyst and butylene oxide concentrations but zero order in phthalic anhydride and, where it is present, zero order in THF. Poly(ester-alt-ethers) have lower glass-transition temperatures (-16 °C < T_g < 12 °C) than the analogous alternating polyesters, consistent with the greater backbone flexibility. They also show faster ester hydrolysis rates compared with the analogous AB polymers. The Zr(IV) catalyst furnishes poly(ester-alt-ethers) from a range of commercially available epoxides and anhydride; it presents a straightforward method to moderate degradable polymers' properties.

Cobalt-Catalyzed C(sp2)-C(sp3) Suzuki-Miyaura Cross-Coupling Enabled by Well-Defined Precatalysts with L,X-Type Ligands

Cobalt(II) halides in combination with phenoxy-imine (FI) ligands generated efficient precatalysts in situ for the C(sp²)-C(sp³) Suzuki-Miyaura cross coupling between alkyl bromides and neopentylglycol (hetero)arylboronic esters. The protocol enabled efficient C-C bond formation with a host of nucleophiles and electrophiles (36 examples, 34-95%) with precatalyst loadings of 5 mol%. Studies with alkyl halide electrophiles that function as radical clocks support the intermediacy of alkyl radicals during the course of the catalytic reaction. The improved performance of the FI-cobalt catalyst was correlated with decreased lifetimes of cage-escaped radicals as compared to diamine-type ligands. Studies of the phenoxy(imine)-cobalt coordination chemistry validate the L,X interaction leading to the discovery of an optimal, well defined, air-stable mono-FI cobalt(II) precatalyst structure.

Copolymerization of Ethylene with Selected Vinyl Monomers Catalyzed by Group 4 Metal and Vanadium Complexes with Multidentate Ligands: A Short Review

This paper gives a short overview of homogeneous post-metallocene catalysts based on group 4 metal and vanadium complexes bearing multidentate ligands. It summarizes the catalytic behavior of those catalysts in copolymerization of ethylene with 1-olefins, with styrenic monomers and with α,ω-alkenols. The review is focused on finding correlations between the structure of a complex, its catalyst activity and comonomer incorporation ability, as well as the microstructure of the copolymer chains.

Titanium methyl tamed on silica: synthesis of a well-defined pre-catalyst for hydrogenolysis of n-alkane

Alkylation of Ti(CH₃)₂Cl₂1 by MeLi gives the homoleptic Ti(CH₃)₄2 for the first time in the absence of any coordinating solvent. The reaction of 2 with silica pretreated at 700 °C (SiO_2-700) gives two inequivalent silica-supported Ti-methyl species 3. Complex 3 was characterized by IR, microanalysis (ICP-OES, CHNS, and gas quantification), and advanced solid-state NMR spectroscopy (¹H, ¹³C, DQ, TQ, and HETCOR). The catalytic activity of the pre-catalyst 3 is investigated in low-temperature hydrogenolysis of propane and n-butane with TONs of 419 and 578, respectively.

Theoretical mechanistic study of metallaphotoredox catalysis: C–N cross-coupling via Ni(ii)-mediated σ-bond metathesis

A radical mechanism merging *Ir^III reductive quenching and Ni^II-mediated σ-bond metathesis has been proposed for metallaphotoredox catalyzed C–N cross-coupling.