How Metal Ion Lewis Acidity and Steric Properties Influence the Barrier to Dioxygen Binding, Peroxo O-O Bond Cleavage, and Reactivity

Exploring the influence of H-bonding and ligand constraints on thiolate ligated non-heme iron mediated dioxygen activation

Converting triplet dioxygen into a powerful oxidant is fundamentally important to life. The study reported herein quantitatively examines the formation of a well-characterized, reactive, O2-derived thiolate ligated FeIII-superoxo using low-temperature stopped-flow kinetics. Comparison of the kinetic barriers to the formation of this species via two routes, involving either the addition of (a) O2 to [FeII(S2 Me2N3(Pr,Pr))] (1) or (b) superoxide to [FeIII(S2 Me2N3(Pr,Pr))]+ (3) is shown to provide insight into the mechanism of O2 activation. Route (b) was shown to be significantly slower, and the kinetic barrier 14.9 kJ mol-1 higher than route (a), implying that dioxygen activation involves inner-sphere, as opposed to outer sphere, electron transfer from Fe(ii). H-bond donors and ligand constraints are shown to dramatically influence O2 binding kinetics and reversibility. Dioxygen binds irreversibly to [FeII(S2 Me2N3(Pr,Pr))] (1) in tetrahydrofuran, but reversibly in methanol. Hydrogen bonding decreases the ability of the thiolate sulfur to stabilize the transition state and the FeIII-superoxo, as shown by the 10 kJ mol-1 increase in the kinetic barrier to O2 binding in methanol vs. tetrahydrofuran. Dioxygen release from [FeIII(S2 Me2N3(Pr,Pr))O2] (2) is shown to be 24 kJ mol-1 higher relative to previously reported [FeIII(SMe2N4(tren))(O2)]+ (5), the latter of which contains a more flexible ligand. These kinetic results afford an experimentally determined reaction coordinate that illustrates the influence of H-bonding and ligand constraints on the kinetic barrier to dioxygen activation an essential step in biosynthetic pathways critical to life.

Coordination Variations within Binuclear Copper Dioxygen-Derived (Hydro)Peroxo and Superoxo Species; Influences upon Thermodynamic and Electronic Properties

Copper ion is a versatile and ubiquitous facilitator of redox chemical and biochemical processes. These include the binding of molecular oxygen to copper(I) complexes where it undergoes stepwise reduction-protonation. A detailed understanding of thermodynamic relationships between such reduced/protonated states is key to elucidate the fundamentals of the chemical/biochemical processes involved. The dicopper(I) complex [CuI2(BPMPO-)]1+ {BPMPOH = 2,6-bis{[(bis(2-pyridylmethyl)amino]methyl}-4-methylphenol)} undergoes cryogenic dioxygen addition; further manipulations in 2-methyltetrahydrofuran generate dicopper(II) peroxo [CuII2(BPMPO-)(O22-)]1+, hydroperoxo [CuII2(BPMPO-)(-OOH)]2+, and superoxo [CuII2(BPMPO-)(O2•-)]2+ species, characterized by UV-vis, resonance Raman and electron paramagnetic resonance (EPR) spectroscopies, and cold spray ionization mass spectrometry. An unexpected EPR spectrum for [CuII2(BPMPO-)(O2•-)]2+ is explained by the analysis of its exchange-coupled three-spin frustrated system and DFT calculations. A redox equilibrium, [CuII2(BPMPO-)(O22-)]1+ ⇄ [CuII2(BPMPO-)(O2•-)]2+, is established utilizing Me8Fc+/Cr(η6-C6H6)2, allowing for [CuII2(BPMPO-)(O2•-)]2+/[CuII2(BPMPO-)(O22-)]1+ reduction potential calculation, E°' = -0.44 ± 0.01 V vs Fc+/0, also confirmed by cryoelectrochemical measurements (E°' = -0.40 ± 0.01 V). 2,6-Lutidinium triflate addition to [CuII2(BPMPO-)(O22-)]1+ produces [CuII2(BPMPO-)(-OOH)]2+; using a phosphazene base, an acid-base equilibrium was achieved, pKa = 22.3 ± 0.7 for [CuII2(BPMPO-)(-OOH)]2+. The BDFEOO-H = 80.3 ± 1.2 kcal/mol, as calculated for [CuII2(BPMPO-)(-OOH)]2+; this is further substantiated by H atom abstraction from O-H substrates by [CuII2(BPMPO-)(O2•-)]2+ forming [CuII2(BPMPO-)(-OOH)]2+. In comparison to known analogues, the thermodynamic and spectroscopic properties of [CuII2(BPMPO-)] O2-derived adducts can be accounted for based on chelate ring size variations built into the BPMPO- framework and the resulting enhanced CuII-ion Lewis acidity.

Controlling product selectivity during dioxygen reduction with Mn complexes using pendent proton donor relays and added base

The catalytic reduction of dioxygen (O2) is important in biological energy conversion and alternative energy applications. In comparison to Fe- and Co-based systems, examples of catalytic O2 reduction by homogeneous Mn-based systems is relatively sparse. Motivated by this lack of knowledge, two Mn-based catalysts for the oxygen reduction reaction (ORR) containing a bipyridine-based non-porphyrinic ligand framework have been developed to evaluate how pendent proton donor relays alter activity and selectivity for the ORR, where Mn(p-tbudhbpy)Cl (1) was used as a control complex and Mn(nPrdhbpy)Cl (2) contains a pendent -OMe group in the secondary coordination sphere. Using an ammonium-based proton source, N,N'-diisopropylethylammonium hexafluorophosphate, we analyzed catalytic activity for the ORR: 1 was found to be 64% selective for H2O2 and 2 is quantitative for H2O2, with O2 binding to the reduced Mn(ii) center being the rate-determining step. Upon addition of the conjugate base, N,N'-diisopropylethylamine, the observed catalytic selectivity of both 1 and 2 shifted to H2O as the primary product. Interestingly, while the shift in selectivity suggests a change in mechanism for both 1 and 2, the catalytic activity of 2 is substantially enhanced in the presence of base and the rate-determining step becomes the bimetallic cleavage of the O-O bond in a Mn-hydroperoxo species. These data suggest that the introduction of pendent relay moieties can improve selectivity for H2O2 at the expense of diminished reaction rates from strong hydrogen bonding interactions. Further, although catalytic rate enhancements are observed with a change in product selectivity when base is added to buffer proton activity, the pendent relays stabilize dimer intermediates, limiting the maximum rate.

Peroxide-Selective Reduction of O2 at Redox-Inactive Rare-Earth(III) Triflates Generates an Ambiphilic Peroxide

Metal peroxides are key species involved in a range of critical biological and synthetic processes. Rare-earth (group III and the lanthanides; Sc, Y, La-Lu) peroxides have been implicated as reactive intermediates in catalysis; however, reactivity studies of isolated, structurally characterized rare-earth peroxides have been limited. Herein, we report the peroxide-selective (93-99% O₂^2-) reduction of dioxygen (O₂) at redox-inactive rare-earth triflates in methanol using a mild metallocene reductant, decamethylferrocene (Fc*). The first molecular praseodymium peroxide ([Pr^III₂(O₂^2-)(18C6)₂(EG)₂][OTf]₄; 18C6 = 18-crown-6, EG = ethylene glycol, ^-OTf = ^-O₃SCF₃; 2-Pr) was isolated and characterized by single-crystal X-ray diffraction, Raman spectroscopy, and NMR spectroscopy. 2-Pr displays high thermal stability (120 °C, 50 mTorr), is protonated by mild organic acids [pK_a1(MeOH) = 5.09 ± 0.23], and engages in electrophilic (e.g., oxygen atom transfer) and nucleophilic (e.g., phosphate-ester cleavage) reactivity. Our mechanistic studies reveal that the rate of oxygen reduction is dictated by metal-ion accessibility, rather than Lewis acidity, and suggest new opportunities for differentiated reactivity of redox-inactive metal ions by leveraging weak metal-ligand binding events preceding electron transfer.

Electronic Structure and Reactivity of Dioxygen-Derived Aliphatic Thiolate-Ligated Fe-Peroxo and Fe(IV) Oxo Compounds

Herein, we examine the electronic and geometric structural properties of O₂-derived aliphatic thiolate-ligated Fe-peroxo, Fe-hydroxo, and Fe(IV) oxo compounds. The latter cleaves strong C-H bonds (96 kcal mol^-1) on par with the valine C-H bond cleaved by isopencillin N synthase (IPNS). Stopped-flow kinetics studies indicate that the barrier to O₂ binding to [Fe^II(S^Me2N₄(tren))]⁺ (3) is extremely low (E_a = 36(2) kJ mol^-1), as theoretically predicted for IPNS. Dioxygen binding to 3 is shown to be reversible, and a superoxo intermediate, [Fe^III(S^Me2N₄(tren))(O₂)]⁺ (6), forms in the first 25 ms of the reaction at -40 °C prior to the rate-determining (E_a = 46(2) kJ mol^-1) formation of peroxo-bridged [(S^Me2N₄(tren))Fe(III)]₂(μ-O₂)²⁺ (7). A log(k_obs) vs log([Fe]) plot for the formation of 7 is consistent with the second-order dependence on iron, and H₂O₂ assays are consistent with a 2:1 ratio of Fe/H₂O₂. Peroxo 7 is shown to convert to ferric-hydroxo [Fe^III(S^Me2N(tren))(OH)]⁺ (9, g_⊥ = 2.24, g_∥ = 1.96), the identity of which was determined via its independent synthesis. Rates of the conversion 7 → 9 are shown to be dependent on the X-H bond strength of the H-atom donor, with a k_H/k_D = 4 when CD₃OD is used in place of CH₃OH as a solvent. A crystallographically characterized cis thiolate-ligated high-valent iron oxo, [Fe^IV(O)(S^Me2N₄(tren))]⁺ (11), is shown to form en route to hydroxo 9. Electronic structure calculations were shown to be consistent with 11 being an S = 1 Fe(IV)═O with an unusually high ν_Fe-O stretching frequency at 918 cm^-1 in line with the extremely short Fe-O bond (1.603(7) Å).

Bioinspired mononuclear Mn complexes for O2 activation and biologically relevant reactions

A general interest in harnessing the oxidizing power of dioxygen (O₂) continues to motivate research efforts on bioinspired and biomimetic complexes to better understand how metalloenzymes mediate these reactions. The ubiquity of Fe- and Cu-based enzymes attracts significant attention and has resulted in many noteworthy developments for abiotic systems interested in direct O₂ reduction and small molecule activation. However, despite the existence of Mn-based metalloenzymes with important O₂-dependent activity, there has been comparatively less focus on the development of these analogues relative to Fe- and Cu-systems. In this Perspective, we summarize important contributions to the development of bioinspired mononuclear Mn complexes for O₂ activation and studies on their reactivity, emphasizing important design parameters in the primary and secondary coordination spheres and outlining mechanistic trends.

Increasing reactivity by incorporating π-acceptor ligands into coordinatively unsaturated thiolate-ligated iron(II) complexes

Reported herein is the structural, spectroscopic, redox, and reactivity properties of a series of iron complexes containing both a π-donating thiolate, and π-accepting N-heterocycles in the coordination sphere, in which we systematically vary the substituents on the N-heterocycle, the size of the N-heterocycle, and the linker between the imine nitrogen and tertiary amine nitrogen. In contrast to our primary amine/thiolate-ligated Fe(II) complex, [Fe^II(S^Me2N₄(tren))]⁺ (1), the Fe(II) complexes reported herein are intensely colored, allowing us to visually monitor reactivity. Ferrous complexes with R = H substituents in the 6-position of the pyridines, [Fe^II(S^Me2N₄(6-H-DPPN)]⁺ (6) and [Fe^II(S^Me2N₄(6-H-DPEN))(MeOH)]⁺ (8-MeOH) are shown to readily bind neutral ligands, and all of the Fe(II) complexes are shown to bind anionic ligands regardless of steric congestion. This reactivity is in contrast to 1 and is attributed to an increased metal ion Lewis acidity assessed via aniodic redox potentials, E_p,a, caused by the π-acid ligands. Thermodynamic parameters (ΔH, ΔS) for neutral ligand binding were obtained from T-dependent equilibrium constants. All but the most sterically congested complex, [Fe^II(S^Me2N₄(6-Me-DPPN)]⁺ (5), react with O₂. In contrast to our Mn(II)-analogues, dioxygen intermediates are not observed. Rates of formation of the final mono oxo-bridged products were assessed via kinetics and shown to be inversely dependent on redox potentials, E_p,a, consistent with a mechanism involving electron transfer.

Influence of Thiolate versus Alkoxide Ligands on the Stability of Crystallographically Characterized Mn(III)-Alkylperoxo Complexes

The work described herein demonstrates the exquisite control that the inner coordination sphere of metalloenzymes and transition-metal complexes can have on reactivity. We report one of few crystallographically characterized Mn-peroxo complexes and show that the tight correlations between metrical and spectroscopic parameters, established previously by our group for thiolate-ligated RS-Mn(III)-OOR complexes, can be extended to include an alkoxide-ligated RO-Mn(III)-OOR complex. We show that the alkoxide-ligated RO-Mn(III)-OOR complex is an order of magnitude more stable (t_1/2^298 K = 6730 s, k_obs^298 K = 1.03 × 10^-4 s^-1) than its thiolate-ligated RS-Mn(III)-OOR derivative (t_1/2^293 K = 249 s, k₁^293 K = 2.78 × 10^-3 s^-1). Electronic structure calculations provide insight regarding these differences in stability. The highest occupied orbital of the thiolate-ligated derivative possesses significant sulfur character and π-backdonation from the thiolate competes with π-backdonation from the peroxo π*(O-O). DFT-calculated Mulliken charges show that the Mn ion Lewis acidity of alkoxide-ligated RO-Mn(III)-OOR (+0.451) is greater than that of thiolate-ligated RS-Mn(III)-OOR (+0.306), thereby facilitating π-backdonation from the antibonding peroxo π*(O-O) orbital and increasing its stability. This helps to explain why the photosynthetic oxygen-evolving Mn complex, which catalyzes O-O bond formation as opposed to cleavage, incorporates O- and/or N-ligands as opposed to ^cysS-ligands.

A family of structural and functional models for the active site of a unique dioxygenase: Acireductone dioxygenase (ARD)

We report the synthesis and biomimetic activity of a family of model complexes with relevance to acireductone dioxygenase (ARD), an enzyme that displays dual function based on metal identity found in the methionine salvage pathway (MSP). Three complexes with related structural motifs were synthesized and characterized derived from phenolate, and pyridine N₄O Schiff-base ligands. They display pseudo-octahedral Ni(II)-N₄O ligand coordination with water at the sixth site, in close alignment to the structure in the resting state of ARD. The three featured complexes exhibit carbon‑carbon bond cleavage activation of lithium acetylacetonate, which was used as a model enzyme substrate. Computationally derived mechanistic routes for the observed reactivity consistent with experimental conditions are herein proposed. The mechanism suggests the possibility of Ni(II)-substrate interactions, followed by oxygen insertion. These results constitute only the third functional model system of ARD, in an attempt to further advance biomimetic contributions to the ongoing debate of ARD's unique metal mediated, regioselective oxidative cleavage.

Dioxygen Activation by Internally Aromatic Metallacycle: Crystallographic Structure and Mechanistic Investigations

Mononuclear metal-peroxo species are invoked as the key intermediates in metalloenzymatic or synthetic catalysis. However, either transience or sluggishness reactivity of synthetic analogs of metal-peroxo species impedes our understanding of oxygen activation mechanism. Herein, we designed and characterized a dioxygen-derived mononuclear osmium-peroxo complex, in which the peroxo ligand is stabilized by internally aromatic metallacycle. We demonstrate that the osmium-peroxo species shows catalytic activity toward promoterless alcohol dehydrogenations. Furthermore, computational studies provide a new mechanism for the osmium-peroxo-mediated alcohol oxidation, starting with the concerted double-hydrogen transfer and followed by the generation of osmium-oxo species. Interestingly, the internally aromatic metallacycle also plays a vital role in catalysis, which mediates the hydrogen transfer from osmium center to the distal oxygen atom of Os–OOH moiety, thus facilitating the Os–OOH→Os=O conversion. We expect that these insights will advance the development of aromatic metallacycle toward aerobic oxidation catalysis.

•

A dioxygen-derived mononuclear osmium-peroxo complex was characterized

•

The peroxo ligand is stabilized by internally aromatic metallacycle

•

O₂ activation involves the reversible aromatization-dearomatization

•

A concerted double-hydrogen transfer mechanism for alcohol dehydrogenation

Comparison of two MnIVMnIV-bis-μ-oxo complexes {[MnIV(N4(6-Me-DPEN))]2(μ-O)2}2+ and {[MnIV(N4(6-Me-DPPN))]2(μ-O)2}2

The addition of tert-butyl hydro-peroxide ( t BuOOH) to two structurally related MnII complexes containing N,N-bis-(6-methyl-2-pyridyl-meth-yl)ethane-1,2-di-amine (6-Me-DPEN) and N,N-bis-(6-methyl-2-pyridyl-meth-yl)propane-1,2-di-amine (6-Me-DPPN) results in the formation of high-valent bis-oxo complexes, namely di-μ-oxido-bis-{[N,N-bis-(6-methyl-2-pyridylmeth-yl)ethane-1,2-di-amine]-manganese(II)}(Mn-Mn) bis-(tetra-phenyl-borate) dihydrate, [Mn(C16H22N4)2O2](C24H20B)2·2H2O or {[MnIV(N4(6-Me-DPEN))]2(μ-O)2}(2BPh4)(2H2O) (1) and di-μ-oxido-bis-{[N,N-bis-(6-methyl-2-pyridylmeth-yl)propane-1,3-di-amine]-manganese(II)}(Mn-Mn) bis-(tetra-phenyl-borate) diethyl ether disolvate, [Mn(C17H24N4)2O2](C24H20B)2·2C4H10O or {[MnIV(N4(6-MeDPPN))]2(μ-O)2}(2BPh4)(2Et2O) (2). Complexes 1 and 2 both contain the 'diamond core' motif found previously in a number of iron, copper, and manganese high-valent bis-oxo compounds. The flexibility in the propyl linker in the ligand scaffold of 2, as compared to that of the ethyl linker in 1, results in more elongated Mn-N bonds, as one would expect. The Mn-Mn distances and Mn-O bond lengths support an MnIV oxidation state assignment for the Mn ions in both 1 and 2. The angles around the Mn centers are consistent with the local pseudo-octa-hedral geometry.

Geometric and electronic structure of a crystallographically characterized thiolate-ligated binuclear peroxo-bridged cobalt(III) complex

In order to shed light on metal-dependent mechanisms for O-O bond cleavage, and its microscopic reverse, we compare herein the electronic and geometric structures of O2-derived binuclear Co(III)- and Mn(III)-peroxo compounds. Binuclear metal peroxo complexes are proposed to form as intermediates during Mn-promoted photosynthetic H2O oxidation, and a Co-containing artificial leaf inspired by nature's photosynthetic H2O oxidation catalyst. Crystallographic characterization of an extremely activated peroxo is made possible by working with substitution-inert, low-spin Co(III). Density functional theory (DFT) calculations show that the frontier orbitals of the Co(III)-peroxo compound differ noticeably from the analogous Mn(III)-peroxo compound. The highest occupied molecular orbital (HOMO) associated with the Co(III)-peroxo is more localized on the peroxo in an antibonding π*(O-O) orbital, whereas the HOMO of the structurally analogous Mn(III)-peroxo is delocalized over both the metal d-orbitals and peroxo π*(O-O) orbital. With low-spin d6 Co(III), filled t2g orbitals prevent π-back-donation from the doubly occupied antibonding π*(O-O) orbital onto the metal ion. This is not the case with high-spin d4 Mn(III), since these orbitals are half-filled. This weakens the peroxo O-O bond of the former relative to the latter.