Carbon Isotope Labeling Strategy for β-Amino Acid Derivatives via Carbonylation of Azanickellacycles

Ammonium Zincates as Catalysts for the Microwave-Enhanced Synthesis of Symmetric Piperazines by Regioselective Opening of Aziridines

2,5-disubstituted N,N'-alkylpiperazines represent an interesting target in organic synthesis both for pharmaceutical or agrochemical applications and as a promising class of ligands in coordination chemistry. We report here a microwave-enhanced synthesis of these compounds starting from non-activated N-alkyl aziridines in the presence of catalytic amounts of simple ammonium metallates. A remarkable TOF of 2787.9 h-1 has been observed in the case of [TBA]2[ZnI4] as the catalyst (catalyst loading 0.1 mol %) and with an almost complete selectivity (up to 97 %) in favor of both diastereoisomers (meso and chiral form) of the target 2,5-disubstituted piperazines, obtained in 1 : 1 ratio. The two isomers are easily separated, because the meso form precipitates in pure from the reaction crude. A stereochemical investigation and the unprecedented isolation of 2,6-disubstituted N,N'-alkylpiperazines allowed us to shed light on the reaction mechanism.

Spectral-Sensing System for Distinguishing CH3OH and CD3OD

Spectrally discriminating CH3OH and CD3OD, and even detecting CH3OH contents in the CD3OD solvent, are important yet have not been achieved so far, likely owing to their very similar chemical/physical properties. Herein, dynamic transesterification reactions, which can be achieved via two-step proton transfers, can be signaled via ultraviolet UV-visible (UV/vis) absorption and fluorescence spectroscopies under mild experimental conditions. Introduction of strong electron-withdrawing groups, such as -NO2, to the aromatic ring (benzoic acid moiety or phenol moiety) of carboxylate esters to activate the esters is important for transesterification reactions and is an intriguing method for modulating the selectivity of the spectral response. The rate constant of the transesterification reaction enhanced with increasing the total number of strong electron-withdrawing groups. Furthermore, the rate constants of esters in which substituent(s) are connected to the phenol moiety are higher than those of corresponding esters in which substituent(s) are connected to the benzoic acid moiety. In transesterification systems, added aliphatic amines mainly play two roles: (i) lowering the energy barrier of the first transesterification step via the formation of intermolecular hydrogen bonding in ternary systems and (ii) deprotonating the released 4-nitrophenol in UV/vis absorption spectral systems to generate an UV/vis absorption spectral signal reporter, i.e., nitrophenolate anions. As a result of the methanol-mediated transesterification reaction, spectral-sensing systems can be established for discriminating CH3OH and CD3OD and even detecting low CH3OH contents in the CD3OD solvent, owing to the kinetic isotope effect. This is the first example of spectral recognition between CD3OD and CH3OH.

Addition of allyl Grignard to nitriles in air and at room temperature: experimental and computational mechanistic insights in pH-switchable synthesis

A straightforward and selective conversion of nitriles into highly substituted tetrahydropyridines, aminoketones or enamines by using allylmagnesium bromide as an addition partner (under neat conditions) and subsequent treatment with different aqueous-based hydrolysis protocols is reported. Refuting the conventional wisdom of the incompatibility of Grignard reagents with air and moisture, we herein report that the presence of water allows us to promote the chemoselective formation of the target tetrahydropyridines over other competing products (even in the case of highly challenging aliphatic nitriles). Moreover, the careful tuning of both the reaction media employed (acid or basic aqueous solutions for the hydrolysis protocol) and the electronic properties of the starting nitriles allowed us to design a multi-task system capable of producing either β-aminoketones or enamines in a totally selective manner. Importantly, and for the first time in the chemistry of main-group polar organometallic reagents in non-conventional protic solvents (e.g., water), both experimental and computational studies showed that the excellent efficiency and selectivity observed in aqueous media cannot be replicated by using standard dry volatile organic solvents (VOCs) under inert atmosphere conditions.

Straightforward Access to Free β2,3,3 -Amino Acids through One Pot C-H Activation/C-C Cleavage

The first synthesis of unnatural β2,3,3 -amino acids with a spirocyclic backbone by one-pot protocol has been presented. This reaction features wide functional group tolerance and feasibility of post-functionalization of natural products and biologically important molecules. Novel dipeptide and tripeptide structures were assembled using this newly developed β2,3,3 -amino acid in high efficiency. The combination of C-H activation and C-C cleavage for the synthesis of β-amino acids would trigger more promising synthetic routes for this compound.

Ligand-Enabled Carboamidation of Unactivated Alkenes through Enhanced Organonickel Electrophilicity

Catalytic carboamination of alkenes is a powerful synthetic tool to access valuable amine scaffolds from abundant and readily available alkenes. Although a number of synthetic approaches have been developed to achieve the rapid buildup of molecular complexity in this realm, the installation of diverse carbon and nitrogen functionalities onto unactivated alkenes remains underdeveloped. Here we present a ligand design approach to enable nickel-catalyzed three-component carboamidation that is applicable to a wide range of alkenyl amine derivatives via a tandem process involving alkyl migratory insertion and inner-sphere metal-nitrenoid transfer. With this method, various nitrogen functionalities can be installed into both internal and terminal unactivated alkenes, leading to differentially substituted diamines that would otherwise be difficult to access. Mechanistic investigations reveal that the tailored Ni(cod)(BQiPr) precatalyst modulates the electronic properties of the presumed π-alkene-nickel intermediate via the quinone ligand, leading to enhanced carbonickelation efficiency across the unactivated C═C bond. These findings establish nickel's ability to catalyze multicomponent carboamidation with a high efficiency and exquisite selectivity.

Skeletal metalation of lactams through a carbonyl-to-nickel-exchange logic

Classical metalation reactions such as the metal-halogen exchange have had a transformative impact on organic synthesis owing to their broad applicability in building carbon-carbon bonds from carbon-halogen bonds. Extending the metal-halogen exchange logic to a metal-carbon exchange would enable the direct modification of carbon frameworks with new implications in retrosynthetic analysis. However, such a transformation requires the selective cleavage of highly inert chemical bonds and formation of stable intermediates amenable to further synthetic elaborations, hence its development has remained considerably challenging. Here we introduce a skeletal metalation strategy that allows lactams, a prevalent motif in bioactive molecules, to be readily converted into well-defined, synthetically useful organonickel reagents. The reaction features a selective activation of unstrained amide C-N bonds mediated by an easily prepared Ni(0) reagent, followed by CO deinsertion and dissociation under mild room temperature conditions in a formal carbonyl-to-nickel-exchange process. The underlying principles of this unique reactivity are rationalized by organometallic and computational studies. The skeletal metalation is further applied to a direct CO excision reaction and a carbon isotope exchange reaction of lactams, underscoring the broad potential of metal-carbon exchange logic in organic synthesis.

Low Pressure Carbonylation of Benzyl Carbonates and Carbamates for Applications in 13 C Isotope Labeling and Catalytic CO2 Reduction

Herein, we report a methodology to access isotopically labeled esters and amides from carbonates and carbamates employing an oxygen deletion strategy. This methodology utilizes a decarboxylative carbonylation approach for isotope labeling with near stoichiometric, ex situ generated 12 C, or 13 C carbon monoxide. This reaction is characterized by its broad scope, functional group tolerance, and high yields, which is showcased with the synthesis of structurally complex molecules. A complementary method that operates by the catalytic in situ generation of CO via the reduction of CO2 liberated during decarboxylation has also been developed as a proof-of-concept approach that CO2 -derived compounds can be converted to CO-containing frameworks. Mechanistic studies provide insight into the catalytic steps which highlight the impact of ligand choice to overcome challenges associated with low-pressure carbonylation methodologies, along with rational for the development of future methodologies.

Atom-economical synthesis of 1,2-bis(phosphine oxide)ethanes from calcium carbide with straightforward access to deuterium- and 13C-labeled bidentate phosphorus ligands and metal complexes

Straightforward access to bidentate phosphorus ligands and bis(phosphineoxide)ethanes is described based on atom-economic addition reaction. A practical approach was developed to incorporate 2H and 13C labels using easily available reagents.

Ni/Photoredox-Catalyzed C(sp3)-C(sp3) Coupling between Aziridines and Acetals as Alcohol-Derived Alkyl Radical Precursors

Aziridines are readily available C(sp³) precursors that afford valuable β-functionalized amines upon ring opening. In this article, we report a Ni/photoredox methodology for C(sp³)-C(sp³) cross-coupling between aziridines and methyl/1°/2° aliphatic alcohols activated as benzaldehyde dialkyl acetals. Orthogonal activation modes of each alkyl coupling partner facilitate cross-selectivity in the C(sp³)-C(sp³) bond-forming reaction: the benzaldehyde dialkyl acetal is activated via hydrogen atom abstraction and β-scission via a bromine radical (generated in situ from single-electron oxidation of bromide), whereas the aziridine is activated at the Ni center via reduction. We demonstrate that an Ni(II) azametallacycle, conventionally proposed in aziridine cross-coupling, is not an intermediate in the productive cross-coupling. Rather, stoichiometric organometallic and linear free energy relationship studies indicate that aziridine activation proceeds via Ni(I) oxidative addition, a previously unexplored elementary step.

Metal-free synthesis of β-aminoketones by the reductive hydroamination of ynones

This study describes a cascade method for the synthesis of β-aminoketones through the reductive hydroamination of alkynes under very mild metal-free conditions. It allows for the rapid conversion of ynones and amines into corresponding β-aminoketones with a broad substrate scope and diverse functionalities. This straightforward and easy-to-handle reaction process can be successfully applied for the synthesis of Proroxan and Propipocaine, offering a potential option for the synthesis of drug molecules with the β-aminoketone skeleton.

Recent progress in the chemistry of β-aminoketones

The current study highlighted the significance of β-aminoketones as privileged biologically active molecules, recent synthetic strategies, and synthetic applications.

Ni-Catalyzed Carboxylation of Aziridines en Route to β-Amino Acids

A Ni-catalyzed reductive carboxylation of N-substituted aziridines with CO₂ at atmospheric pressure is disclosed. The protocol is characterized by its mild conditions, experimental ease, and exquisite chemo- and regioselectivity pattern, thus unlocking a new catalytic blueprint to access β-amino acids, important building blocks with considerable potential as peptidomimetics.

Fast Carbon Isotope Exchange of Carboxylic Acids Enabled by Organic Photoredox Catalysis

Carbazole/cyanobenzene photocatalysts promote the direct isotopic carboxylate exchange of C(sp³) acids with labeled CO₂. Substrates that are not compatible with transition-metal-catalyzed degradation-reconstruction approaches or prone to thermally induced reversible decarboxylation undergo isotopic incorporation at room temperature in short reaction times. The radiolabeling of drug molecules and precursors with [¹¹C]CO₂ is demonstrated.

"Doubly Customizable" Unit for the Generation of Structural Diversity: From Pure Enantiomeric Amines to Peptide Derivatives

Readily available, low-cost 4R-hydroxy-l-proline (Hyp) is introduced as a "doubly customizable" unit for the generation of libraries of structurally diverse compounds. Hyp can be cleaved at two points, followed by the introduction of new functionalities. In the first cycle, the removal and replacement of the carboxylic group are carried out, followed (second cycle) by the scission of the 4,5-position and manipulation of the resulting chains. In this way, three new chains are generated and can be transformed independently to afford a diversity of products with tailored substituents, such as β-amino aldehydes, diamines, β-amino acid derivatives, including N-alkylated ones, or modified peptides. Many of these products are high-profit compounds but, in spite of their commercial value, are still scarce. Moreover, the process takes place with stereochemical control, and either pure R or S isomers can be obtained with small variations of the synthetic route.

Controlled Release of Reactive Gases: A Tale of Taming Carbon Monoxide

This Personal Account describes the development of air-stable and solid precursors for on-demand release of carbon monoxide. In combination with the development of a two-chamber reactor, COware®, CO liberation can be achieved under safe working conditions, as well as allowing transition metal-mediated carbonylations with stoichiometric carbon monoxide. Particularly appealing is the adaptability of this chemical technology for the preparation of carbon isotope labeled bioactive compounds.

Nickel-Catalyzed Formal Aminocarbonylation of Unactivated Alkyl Iodides with Isocyanides

Herein, we disclose a Ni-catalyzed formal aminocarbonylation of primary and secondary unactivated aliphatic iodides with isocyanides to afford alkyl amide, which proceeds via the selective monomigratory insertion of isocyanides with alkyl iodides, subsequent β-hydride elimination, and hydrolysis process. The reaction features wide functional group tolerance under mild conditions. Additionally, the selective, one-pot hydrolysis of reaction mixture under acid conditions allows for expedient synthesis of the corresponding alkyl carboxylic acid.

Direct Access to Isotopically Labeled Aliphatic Ketones Mediated by Nickel(I) Activation

An extensive range of functionalized aliphatic ketones with good functional-group tolerance has been prepared by a Ni^I -promoted coupling of either primary or secondary alkyl iodides with NN₂ pincer Ni^II -acyl complexes. The latter were easily accessed from the corresponding Ni^II -alkyl complexes with stoichiometric CO. This Ni-mediated carbonylative coupling is adaptable to late-stage carbon isotope labeling, as illustrated by the preparation of isotopically labelled pharmaceuticals. Preliminary investigations suggest the intermediacy of carbon-centered radicals.

Nickel-catalyzed allylic carbonylative coupling of alkyl zinc reagents with tert-butyl isocyanide

Transition metal-catalyzed carbonylation with carbon nucleophiles is one of the most prominent methods to construct ketones, which are highly versatile motifs prevalent in a variety of organic compounds. In comparison to the well-established palladium catalytic system, the nickel-catalyzed carbonylative coupling is much underdeveloped due to the strong binding affinity of CO to nickel. By leveraging easily accessible tert-butyl isocyanide as the CO surrogate, we present a nickel-catalyzed allylic carbonylative coupling with alkyl zinc reagent, allowing for the practical and straightforward preparation of synthetically important β,γ-unsaturated ketones in a linear-selective fashion with excellent trans-selectivity under mild conditions. Moreover, the undesired polycarbonylation process which is often encountered in palladium chemistry could be completely suppressed. This nickel-based method features excellent functional group tolerance, even including the active aryl iodide functionality to allow the orthogonal derivatization of β,γ-unsaturated ketones. Preliminary mechanistic studies suggest that the reaction proceeds via a π-allylnickel intermediate.

In contrast to the well-established palladium-catalyzed version, the nickel-catalyzed carbonylative coupling is underdeveloped. Here the authors report a nickel-catalyzed allylic carbonylative coupling with alkyl zinc reagents, allowing for preparation of β,γ-unsaturated ketones in a linear-selective fashion.