Mechanistic Study of Oxygen Reduction at Liquid/Liquid Interfaces by Hybrid Ultramicroelectrodes and Mass Spectrometry

Mapping Reaction Pathways by In Situ Step Sweep Voltammetry Flow Electrochemical Mass Spectrometry

A step sweep voltammetry (SSV) flow electrochemical (EC) mass spectrometry (MS) platform was developed for real-time and in situ mapping of EC reaction pathways. By integrating a flow EC cell into the pneumatic spray nozzle followed by atmospheric chemical ionization, this setup was capable of in situ MS monitoring of short-lived EC intermediates with enhanced sensitivity. This setup also realized precise measurement and control of the electrode potential during in situ EC-MS analysis, which can provide detailed information on the interplay of reaction pathways under different electrode potentials. Taking the EC reductive cross coupling of nitroarenes with arylboronic acids as an example, SSV-MS had identified 13 compounds among four reaction pathways. Among these, the electrode potential of active nitrene and cross coupling intermediates were measured for the first time and the structure of the nitroso coupling complex was also confirmed by MS. With the systematic measurement of electrode potential of the intermediates and products, SSV-MS had clearly mapped out the synergies and competitions between different reaction pathways, offering key insights for optimizing reaction conditions and investigating reaction mechanisms for EC research.

Hydrogen-Bonded Organic Framework Enhanced Antifouling Property for Efficient In Situ Electrochemical Assay of Cerebral Ascorbic Acid

Accurate determination of cerebral ascorbic acid (AA) is crucial for understanding ischemic stroke (IS) related pathological events. Carbon fiber microelectrodes (CFEs) have proven to be robust tools with high sensitivity toward AA, however, they face ongoing challenges for in situ measurement due to the non-specific adsorption of proteins in brain tissue. In this study, the hydrogen-bonded organic framework PFC-71 is synthesized and modified on CFEs through π-π stacking interactions with carboxylated carbon nanotubes (CNT-COOH). It is found that the gating effect and hydrophilicity of PFC-71 provided the CFE with excellent antibiofouling properties. As a result, AA exhibited a low oxidation potential of -30 mV on the CFE/CNT-COOH/PFC-71, even in the presence of 20 mg mL-1 bovine serum albumin. Given the structural advantages of CFE/CNT-COOH/PFC-71, a ratiometric electrochemical strategy for AA is established, enabling the in situ assay of cerebral AA in a middle cerebral artery occlusion (MCAO) model with high accuracy and stability.

Recent Advances in On-Line Mass Spectrometry Toolbox for Mechanistic Studies of Organic Electrochemical Reactions

Electrochemical reactions are very complex and involve a variety of physicochemical processes. Accurate and systematic monitoring of intermediate process changes during the reaction is essential for understanding the mechanism of electrochemical reactions and is the basis for rational design of new electrochemical reactions. On-line electrochemical analysis based on mass spectrometry (MS) has become an important tool for studying electrochemical reactions. This technique is based on different ionization and sampling means and realizes on-line analysis of electrochemical reactions by establishing electrochemistry-MS (EC-MS) coupling devices. In particular, it provides key evidence for elucidating the reaction mechanism by capturing and identifying the reactive reaction intermediates. This review will categorize various EC-MS devices and the organic electrochemical reaction systems they study, highlighting the latest research progress in recent years. It will also analyze the properties of various devices and look forward to the future development of EC-MS.

Paper-in-Tip Bipolar Electrospray Mass Spectrometry for Real-Time Chemical Reaction Monitoring

Capturing short-lived intermediates at the molecular level is key to understanding the mechanism and dynamics of chemical reactions. Here, we have developed a paper-in-tip bipolar electrolytic electrospray mass spectrometry platform, in which a piece of triangular conductive paper incorporated into a plastic pipette tip serves not only as an electrospray emitter but also as a bipolar electrode (BPE), thus triggering both electrospray and electrolysis simultaneously upon application of a high voltage. The bipolar electrolysis induces a pair of redox reactions on both sides of BPE, enabling both electro-oxidation and electro-reduction processes regardless of the positive or negative ion mode, thus facilitating access to complementary structural information for mechanism elucidation. Our method enables real-time monitoring of transient intermediates (such as N,N-dimethylaniline radical cation, dopamine o-quinone (DAQ) and sulfenic acid with half-lives ranging from microseconds to minutes) and transient processes (such as DAQ cyclization with a rate constant of 0.15 s-1). This platform also provides key insights into electrocatalytic reactions such as Fe (III)-catalyzed dopamine oxidation to quinone species at physiological pH for neuromelanin formation.

Electrocatalytic CO2 Reduction: Monitoring of Catalytically Active, Downgraded, and Upgraded Cobalt Complexes

The premise of most studies on the homogeneous electrocatalytic CO2 reduction reaction (CO2RR) is a good understanding of the reaction mechanisms. Yet, analyzing the reaction intermediates formed at the working electrode is challenging and not always attainable. Here, we present a new, general approach to studying the reaction intermediates applied for CO2RR catalyzed by a series of cobalt complexes. The cobalt complexes were based on the TPA-ligands (TPA = tris(2-pyridylmethyl)amine) modified by amino groups in the secondary coordination sphere. By combining the electrochemical experiments, electrochemistry-coupled electrospray ionization mass spectrometry, with density functional theory (DFT) calculations, we identify and spectroscopically characterize the key reaction intermediates in the CO2RR and the competing hydrogen-evolution reaction (HER). Additionally, the experiments revealed the rarely reported in situ changes in the secondary coordination sphere of the cobalt complexes by the CO2-initiated transformation of the amino substituents to carbamates. This launched an even faster alternative HER pathway. The interplay of three catalytic cycles, as derived from the experiments and supported by the DFT calculations, explains the trends that cobalt complexes exhibit during the CO2RR and HER. Additionally, this study demonstrates the need for a molecular perspective in the electrocatalytic activation of small molecules efficiently obtained by the EC-ESI-MS technique.

COF-Coated Microelectrode for Space-Confined Electrochemical Sensing of Dopamine in Parkinson's Disease Model Mouse Brain

Parkinson's disease (PD) is a progressive neurodegenerative disorder causing the loss of dopaminergic neurons in the substantia nigra and the drastic depletion of dopamine (DA) in the striatum; thus, DA can act as a marker for PD diagnosis and therapeutic evaluation. However, detecting DA in the brain is not easy because of its low concentration and difficulty in sampling. In this work, we report the fabrication of a covalent organic framework (COF)-modified carbon fiber microelectrode (cCFE) that enables the real-time detection of DA in the mouse brain thanks to the outstanding antibiofouling and antichemical fouling ability, excellent analytical selectivity, and sensitivity offered by the COF modification. In particular, the COF can inhibit the polymerization of DA on the electrode (namely, chemical fouling) by spatially confining the molecular conformation and electrochemical oxidation of DA. The cCFE can stably and continuously work in the mouse brain to detect DA and monitor the variation of its concentration. Furthermore, it was combined with levodopa administration to devise a closed-loop feedback mode for PD diagnosis and therapy, in which the cCFE real-time monitors the concentration of DA in the PD model mouse brain to instruct the dose and injection time of levodopa, allowing a customized medication to improve therapeutic efficacy and meanwhile avoid adverse side effects. This work demonstrates the fascinating properties of a COF in fabricating electrochemical sensors for in vivo bioanalysis. We believe that the COF with structural tunability and diversity will offer enormous promise for selective detection of neurotransmitters in the brain.

Elucidating the Underlying Reactivities of Alternating Current Electrosynthesis by Time-Resolved Mapping of Short-Lived Reactive Intermediates

Alternating current (AC) electrolysis is an emerging field in synthetic chemistry, however its mechanistic studies are challenged by the effective characterization of the elusive intermediate processes. Herein, we develop an operando electrochemical mass spectrometry platform that allows time-resolved mapping of stepwise electrosynthetic reactive intermediates in both direct current and alternating current modes. By dissecting the key intermediate processes of electrochemical functionalization of arylamines, the unique reactivities of AC electrosynthesis, including minimizing the over-oxidation/reduction through the inverse process, and enabling effective reaction of short-lived intermediates generated by oxidation and reduction in paired electrolysis, were evidenced and verified. Notably, the controlled kinetics of reactive N-centered radical intermediates in multistep sequential AC electrosynthesis to minimize the competing reactions was discovered. Overall, this work provides direct evidence for the mechanism of AC electrolysis, and clarifies the underlying reasons for its high efficiency, which will benefit the rational design of AC electrosynthetic reactions.

Oxygen Evolution/Reduction Reaction Catalysts: From In Situ Monitoring and Reaction Mechanisms to Rational Design

The oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are core steps of various energy conversion and storage systems. However, their sluggish reaction kinetics, i.e., the demanding multielectron transfer processes, still render OER/ORR catalysts less efficient for practical applications. Moreover, the complexity of the catalyst-electrolyte interface makes a comprehensive understanding of the intrinsic OER/ORR mechanisms challenging. Fortunately, recent advances of in situ/operando characterization techniques have facilitated the kinetic monitoring of catalysts under reaction conditions. Here we provide selected highlights of recent in situ/operando mechanistic studies of OER/ORR catalysts with the main emphasis placed on heterogeneous systems (primarily discussing first-row transition metals which operate under basic conditions), followed by a brief outlook on molecular catalysts. Key sections in this review are focused on determination of the true active species, identification of the active sites, and monitoring of the reactive intermediates. For in-depth insights into the above factors, a short overview of the metrics for accurate characterizations of OER/ORR catalysts is provided. A combination of the obtained time-resolved reaction information and reliable activity data will then guide the rational design of new catalysts. Strategies such as optimizing the restructuring process as well as overcoming the adsorption-energy scaling relations will be discussed. Finally, pending current challenges and prospects toward the understanding and development of efficient heterogeneous catalysts and selected homogeneous catalysts are presented.

Identifying Metal-Oxo/Peroxo Intermediates in Catalytic Water Oxidation by In Situ Electrochemical Mass Spectrometry

Molecular catalysis of water oxidation has been intensively investigated, but its mechanism is still not yet fully understood. This study aims at capturing and identifying key short-lived intermediates directly during the water oxidation catalyzed by a cobalt-tetraamido macrocyclic ligand complex using a newly developed an in situ electrochemical mass spectrometry (EC-MS) method. Two key ligand-centered-oxidation intermediates, [(L^2-)Co^IIIOH] and [(L^2-)Co^IIIOOH], were directly observed for the first time, and further confirmed by ¹⁸O-labeling and collision-induced dissociation studies. These experimental results further confirmed the rationality of the water nucleophilic attack mechanism for the single-site water oxidation catalysis. This work also demonstrated that such an in situ EC-MS method is a promising analytical tool for redox catalytic processes, not only limited to water oxidation.

Crucial Roles of a Pendant Imidazole Ligand of a Cobalt Porphyrin Complex in the Stoichiometric and Catalytic Reduction of Dioxygen

A cobalt porphyrin complex with a pendant imidazole base ([(L₁ )Co^II ]) is an efficient catalyst for the homogeneous catalytic two-electron reduction of dioxygen by 1,1'-dimethylferrocene (Me₂ Fc) in the presence of triflic acid (HOTf), as compared with a cobalt porphyrin complex without a pendant imidazole base ([(L₂ )Co^II ]). The pendant imidazole ligand plays a crucial role not only to provide an imidazolinium proton for proton-coupled electron transfer (PCET) from [(L₁ )Co^II ] to O₂ in the presence of HOTf but also to facilitate electron transfer (ET) from [(L₁ )Co^II ] to O₂ in the absence of HOTf. The kinetics analysis and the detection of intermediates in the stoichiometric and catalytic reduction of O₂ have provided clues to clarify the crucial roles of the pendant imidazole ligand of [(L₁ )Co^II ] for the first time.

Water coordinated on Cu(I)-based catalysts is the oxygen source in CO2 reduction to CO

Catalytic reduction of CO₂ over Cu-based catalysts can produce various carbon-based products such as the critical intermediate CO, yet significant challenges remain in shedding light on the underlying mechanisms. Here, we develop a modified triple-stage quadrupole mass spectrometer to monitor the reduction of CO₂ to CO in the gas phase online. Our experimental observations reveal that the coordinated H₂O on Cu(I)-based catalysts promotes CO₂ adsorption and reduction to CO, and the resulting efficiencies are two orders of magnitude higher than those without H₂O. Isotope-labeling studies render compelling evidence that the O atom in produced CO originates from the coordinated H₂O on catalysts, rather than CO₂ itself. Combining experimental observations and computational calculations with density functional theory, we propose a detailed reaction mechanism of CO₂ reduction to CO over Cu(I)-based catalysts with coordinated H₂O. This study offers an effective method to reveal the vital roles of H₂O in promoting metal catalysts to CO₂ reduction.

Understanding the underlying mechanisms for catalytic reduction of CO₂ over Cu based catalysts remains challenging. Here, the authors develop an effective method to reveal the vital roles of H₂O in promoting metal catalysts to CO₂ reduction via a modified triple stage quadrupole mass spectrometer.

Ultrafine Mo2C nanoparticles embedded in an MOF derived N and P co-doped carbon matrix for an efficient electrocatalytic oxygen reduction reaction in zinc-air batteries

Exploring high-activity electrocatalysts for an oxygen reduction reaction (ORR) is of great significance for a variety of renewable energy conversion and storage technologies. Here, ultrafine Mo₂C nanoparticles assembled in N and P-co-doped carbon (Mo₂C@NPC) was developed from ZIF-8 encapsulated molybdenum-based polyoxometalates (PMo₁₂) as a highly efficient ORR electrocatalyst and shows excellent performance for zinc-air batteries. The well distribution of the PMo₁₂ in ZIF-8 results in the formation of ultrafine Mo₂C nanocrystallites encapsulated in a porous carbon matrix after pyrolysis. Significantly, from experimental and theoretical investigations, the highly porous structure, highly dispersed ultrafine Mo₂C and the N and P co-doping in the Mo₂C@NPC lead to the remarkable ORR activity with an onset potential of ∼1.01 V, a half-wave potential of ∼0.90 V and a Tafel slope of 51.7 mV dec^-1 at 1600 rpm in 0.1 M KOH. In addition, the Mo₂C@NPC as an ORR catalyst in zinc-air batteries achieved a high power density of 266 mW cm^-2 and a high specific capacity of 780.9 mA h g^-1, exceeding that driven by commercial Pt/C. Our results revealed that the porous architecture and ultrafine Mo₂C nanocrystallites of the electrocatalysts could facilitate mass transport and increase the accessibility of active sites, thus optimizing their performances in an ORR. The present study provides some guidelines for the design and synthesis of efficient nanostructured electrocatalysts.

Revealing the Sulfur Redox Paths in a Li-S Battery by an In Situ Hyphenated Technique of Electrochemistry and Mass Spectrometry

The lithium-sulfur (Li-S) battery is one of the most promising next generation energy storage systems due to its high theoretical specific energy. However, the shuttle effect of soluble lithium polysulfides formed during cell operation is a crucial reason for the low cyclability suffered by current Li-S batteries. As a result, an in-depth mechanistic understanding of the sulfur cathode redox reactions is urgently required for further advancement of Li-S batteries. Herein, the direct observation of polysulfides in a Li-S battery is reported by an in situ hyphenated technique of electrochemistry and mass spectrometry. Several short-lived lithium polysulfide intermediates during sulfur redox have been identified. Furthermore, this method is applied to a mechanistic study of an electrocatalyst that has been observed to promote the polysulfides conversion in a Li-S cell. Through the abundance distributions of various polysulfides before and after adding the electrocatalyst, compelling experimental evidences of catalytic selectivity of cobalt phthalocyanine to those long-chain polysulfide intermediates are obtained. This work can provide guidance for the design of novel cathode to overcome the shuttle effect and facilitate the sulfur redox kinetics.

Insights into Electrochemiluminescence Dynamics by Synchronizing Real-Time Electrical, Luminescent, and Mass Spectrometric Measurements

Electrochemiluminescence (ECL) comprises a sophisticated cascade of reactions. Despite advances in mechanistic studies by electrochemistry and spectroscopy, a lack of access to dynamic molecular information renders many plausible ECL pathways unclear or unproven. Here we describe the construction of a real-time ECL mass spectrometry (MS) platform (RT-Triplex) for synchronization of dynamic electrical, luminescent, and mass spectrometric outputs during ECL events. This platform allows immediate and continuous sampling of newly born species at the Pt wire electrode of a capillary electrochemical (EC) microreactor into MS, enabling characterization of short-lived intermediates and the multi-step EC processes. Two ECL pathways of luminol are validated by observing the key intermediates α-hydroxy hydroperoxide and diazaquinone and unraveling their correlation with applied voltage and ECL emission. Moreover, a “catalytic ECL route” of boron dipyrromethene (BODIPY) involving homogeneous oxidation of tri-n-propylamine with the BODIPY radical cation is proposed and verified.

A real-time electrochemiluminescence mass spectrometry platform (RT-Triplex) was developed for revealing ECL mechanisms by synchronization of dynamic electrical, luminescent, and mass spectrometric signals at the electrode–electrolyte interface.

CHEMICAL REACTION MONITORING BY AMBIENT MASS SPECTROMETRY

Chemical reactions conducted in different media (liquid phase, gas phase, or surface) drive developments of versatile techniques for the detection of intermediates and prediction of reasonable reaction pathways. Without sample pretreatment, ambient mass spectrometry (AMS) has been applied to obtain structural information of reactive molecules that differ in polarity and molecular weight. Commercial ion sources (e.g., electrospray ionization, atmospheric pressure chemical ionization, and direct analysis in real-time) have been reported to monitor substrates and products by offline reaction examination. While the interception or characterization of reactive intermediates with short lifetime are still limited by the offline modes. Notably, online ionization technologies, with high tolerance to salt, buffer, and pH, can achieve direct sampling and ionization of on-going reactions conducted in different media (e.g., liquid phase, gas phase, or surface). Therefore, short-lived intermediates could be captured at unprecedented timescales, and the reaction dynamics could be studied for mechanism examinations without sample pretreatments. In this review, via various AMS methods, chemical reaction monitoring and mechanism elucidation for different classifications of reactions have been reviewed. The developments and advances of common ionization methods for offline reaction monitoring will also be highlighted.

Recent Advances of In-Source Electrochemical Mass Spectrometry

Hyphenation of electrochemistry (EC) and mass spectrometry has become a powerful tool to study redox processes. Approaches that can achieve this hyphenation include integrating chromatography/electrophoresis between electroinduced redox reactions and detection of products, coupling an EC flow cell to a mass spectrometer, and performing electrochemical reactions inside the ion source of a mass spectrometer. The first two approaches have been well reviewed elsewhere. This Minireview highlights the inherent electrochemical properties of many mass spectrometry ion sources and their roles in the coupling of electrochemistry and mass spectrometric analysis. Development of modified ion sources that allow the compatibility of electrochemistry with ionization processes is also surveyed. Applications of different in-source electrochemical devices are provided including intermediate capturing, bioanalytical studies, nanoparticle formation, electrosynthesis, and electrode imaging.

Investigation of Dendrimer Transfer Behaviors at the Micro-Water/1,2-Dichloroethane Interface Facilitated by Dibenzo-18-Crown-6

Trans-interfacial behaviors of multiple ionic species at the interface between two immiscible electrolyte solutions (ITIES) are of importance to biomembrane mimicking, chemical and biosensing, and interfacial molecular catalysis. Utilizing host-guest interaction to facilitate ion transfer is an effective and commonly used method to decrease the Gibbs energy of transfer of a target molecule. Herein, we investigated a facilitated ion transfer (FIT) process of poly(amidoamine)dendrimer (PAMAM, G0-G2) by dibenzo-18-crown-6 (DB18C6) at the microinterfaces between water and 1,2-dichloroethane (μ-W/DCE). Because of the host-guest interaction between a dendrimer and a ligand, negative shifts of the transfer potentials were observed using cyclic voltammetry or Osteryoung square wave voltammetry. From the FIT behavior of the dendrimer, we revealed that each DB18C6 could selectively coordinate with one amino group. We first evaluated the protonated status of the intermediate state (1:2) exactly under the conditions the dendrimer (G1) transfers across the interface using the electrochemical mass spectrometry (EC-MS)-hyphenated technique, which is much smaller than the protonated status in the water phase (1:8 to 14). Using the same methodology, we also studied the facilitated transfer behaviors of G0 and G2. Based on these results, we put forward the mechanism of the FIT process, which might involve a deprotonating process at the interface for higher-generation dendrimers.