Amplification of Elementary Surface Reaction Steps on Transition Metal Surfaces Using Liquid Crystals: Dissociative Adsorption and Dehydrogenation

Actuating Liquid Crystals Rapidly and Reversibly by Using Chemical Catalysis

Microtubules and catalytic motor proteins underlie the microscale actuation of living materials, and they have been used in reconstituted systems to harness chemical energy to drive new states of organization of soft matter (e.g., liquid crystals (LCs)). Such materials, however, are fragile and challenging to translate to technological contexts. Rapid (sub-second) and reversible changes in the orientations of LCs at room temperature using reactions between gaseous hydrogen and oxygen that are catalyzed by Pd/Au surfaces are reported. Surface chemical analysis and computational chemistry studies confirm that dissociative adsorption of H2 on the Pd/Au films reduces preadsorbed O and generates 1 ML of adsorbed H, driving nitrile-containing LCs from a perpendicular to a planar orientation. Subsequent exposure to O2 leads to oxidation of the adsorbed H, reformation of adsorbed O on the Pd/Au surface, and a return of the LC to its initial orientation. The roles of surface composition and reaction kinetics in determining the LC dynamics are described along with a proof-of-concept demonstration of microactuation of beads. These results provide fresh ideas for utilizing chemical energy and catalysis to reversibly actuate functional LCs on the microscale.

Nanoparticle-Assisted Liquid Crystal Droplet Sensors Enable Analysis of Low-Concentration Species in Aqueous Medium

We introduce nanoparticle-assisted liquid crystal (LC) droplet-based sensors that allow determination of low-level concentrations of aqueous soluble species. The silica nanoparticles functionalized with mixed monolayers composed of two distinct groups, hydrophobic alkane tail- and charged group-terminated silanes, facilitated ternary physical interactions between the model analytes (methylene blue (MB) or methyl orange (MO)) and the nematic mesogens 5CB (4-cyano-4'-pentylbiphenyl), and the interfacial species of the nanoparticle. The response of the LC droplets was measured upon nanoparticle adsorption as a function of analyte concentration, which was characterized by the optical determination of the configuration distributions of the LC droplets. We highlight the importance of the charging and the composition of the nanoparticle interfaces for analytical purposes that allow accurate determination of the concentration of the analytes on the order of 0.01 ppb. Such a low concentration corresponds to a low interfacial coverage of nanoparticles, indicating the promisingly high sensitivity of the sensor platform to target analytes. Distinct from the past examples of the LC-based sensors, the nanoparticle-assisted LC sensors allow detection of the species that do not directly cause an ordering transition at the LC-water interfaces, which allow a broader range of analytical targets. The sensor platform that we report herein can be easily tunable for a range of target molecules and will find use in the determination of a wide range of micropollutants in aqueous environments.

Elucidating Molecular-Scale Principles Governing the Anchoring of Liquid Crystal Mixtures on Solid Surfaces

Computational chemistry calculations are broadly useful for guiding the atom-scale design of hard-soft material interfaces including how molecular interactions of single-component liquid crystals (LCs) at inorganic surfaces lead to preferred orientations of the LC far from the surface. The majority of LCs, however, are not single-component phases but comprise of mixtures, such as a mixture of mesogens, added to provide additional functions such as responsiveness to the presence of targeted organic compounds (for chemical sensing). In such LC mixtures, little is understood about the near-surface composition and organization of molecules and how that organization propagates into the far-field LC orientation. Here, we address this broad question by using a multiscale computational approach that combines density functional theory (DFT)-based calculations and classical molecular dynamics (MD) simulations to predict the interfacial composition and organization of a binary LC mixture of 4'-cyano-4-biphenylcarbolxylic acid (CBCA) and 4'-n-pentyl-4-biphenylcarbonitrile (5CB) supported on anatase (101) titania surfaces. DFT calculations determine the surface composition and atomic-scale organization of CBCA and 5CB at the titania surface, and classical MD simulations build upon the DFT description to describe the evolution of the near-surface order into the bulk LC. A surprising finding is that the 5CB and CBCA molecules adopt orthogonal orientations at the anatase surface and that, above a threshold concentration of CBCA, this mixture of orientations evolves away from the surface to define a uniform far-field homeotropic orientation. These results demonstrate that molecular-level knowledge achieved through a combination of computational techniques permits the design and understanding of functional LC mixtures at interfaces.

Sensing Gas Mixtures by Analyzing the Spatiotemporal Optical Responses of Liquid Crystals Using 3D Convolutional Neural Networks

We report how analysis of the spatial and temporal optical responses of liquid crystal (LC) films to targeted gases, when performed using a machine learning methodology, can advance the sensing of gas mixtures and provide important insights into the physical processes that underlie the sensor response. We develop the methodology using O₃ and Cl₂ mixtures (representative of an important class of analytes) and LCs supported on metal perchlorate-decorated surfaces as a model system. Although O₃ and Cl₂ both diffuse through LC films and undergo redox reactions with the supporting metal perchlorate surfaces to generate similar initial and final optical states of the LCs, we show that a three-dimensional convolutional neural network can extract feature information that is encoded in the spatiotemporal color patterns of the LCs to detect the presence of both O₃ and Cl₂ species in mixtures and to quantify their concentrations. Our analysis reveals that O₃ detection is driven by the transition time over which the brightness of the LC changes, while Cl₂ detection is driven by color fluctuations that develop late in the optical response of the LC. We also show that we can detect the presence of Cl₂ even when the concentration of O₃ is orders of magnitude greater than the Cl₂ concentration. The proposed methodology is generalizable to a wide range of analytes, reactive surfaces, and LCs and has the potential to advance the design of portable LC monitoring devices (e.g., wearable devices) for analyzing gas mixtures using spatiotemporal color fluctuations.

Ordering Transitions of Liquid Crystals Triggered by Metal Oxide-catalyzed Reactions of Sulfur Oxide Species

Liquid crystals (LCs), when supported on reactive surfaces, undergo changes in ordering that can propagate over distances of micrometers, thus providing a general and facile mechanism to amplify atomic-scale transformations on surfaces into the optical scale. While reactions on organic and metal substrates have been coupled to LC-ordering transitions, metal oxide substrates, which offer unique catalytic activities for reactions involving atmospherically important chemical species such as oxidized sulfur species, have not been explored. Here, we investigate this opportunity by designing LCs that contain 4'-cyanobiphenyl-4-carboxylic acid (CBCA) and respond to surface reactions triggered by parts-per-billion concentrations of SO₂ gas on anatase (101) substrates. We used electronic structure calculations to predict that the carboxylic acid group of CBCA binds strongly to anatase (101) in a perpendicular orientation, a prediction that we validated in experiments in which CBCA (0.005 mol %) was doped into an LC (4'-n-pentyl-4-biphenylcarbonitrile). Both experiment and computational modeling further demonstrated that SO₃-like species, produced by a surface-catalyzed reaction of SO₂ with H₂O on anatase (101), displace CBCA from the anatase surface, resulting in an orientational transition of the LC. Experiments also reveal the LC response to be highly selective to SO₂ over other atmospheric chemical species (including H₂O, NH₃, H₂S, and NO₂), in agreement with our computational predictions for anatase (101) surfaces. Overall, we establish that the catalytic activities of metal oxide surfaces offer the basis of a new class of substrates that trigger LCs to undergo ordering transitions in response to chemical species of relevance to atmospheric chemistry.

Understanding the interaction between carboxylates and coinage metals from first principles

Carboxylate groups have recently been explored as a new type of ligand to protect superatomic copper and silver nanoclusters, but little is known of the interfacial structure and bonding. Here, we employ density functional theory to investigate the interfaces of a model carboxylate group, CH₃COO, on the coinage metal surfaces and clusters. We found that μ₂-CH₃COO is the most preferred binding mode on the three M(111) surfaces (M = Cu, Ag, and Au), while μ₃-CH₃COO is also stable on Cu(111) and Ag(111). The saturation coverage was found to be about seven CH₃COO groups per nm² for all surfaces. CH₃COO has the strongest binding on Cu and weakest on Au. Moving from the flat surfaces to the icosahedral M₁₃ clusters, we found that the eight-electron superatomic [M₁₃(CH₃COO)₆]^- nanoclusters also prefer the μ₂-CH₃COO mode on the surface. The icosahedral kernel in [Cu₁₃(CH₃COO)₆]^- and [Ag₁₃(CH₃COO)₆]^- was well maintained after geometry optimization, but a larger deformation was found in [Au₁₃(CH₃COO)₆]^-. Given the broad availability and variety of carboxylic acids including amino acids, our work suggests that carboxylate groups could be the next-generation ligands to further expand the universe of atomically precise metal clusters, especially for Cu and Ag.

Coupling the chemical reactivity of bimetallic surfaces to the orientations of liquid crystals

The development of responsive soft materials with tailored functional properties based on the chemical reactivity of atomically precise inorganic interfaces has not been widely explored. In this communication, guided by first-principles calculations, we design bimetallic surfaces comprised of atomically thin Pd layers deposited onto Au that anchor nematic liquid crystalline phases of 4'-n-pentyl-4-biphenylcarbonitrile (5CB) and demonstrate that the chemical reactivity of these bimetallic surfaces towards Cl₂ gas can be tuned by specification of the composition of the surface alloy. Specifically, we use underpotential deposition to prepare submonolayer to multilayers of Pd on Au and employ X-ray photoelectron and infrared spectroscopy to validate computational predictions that binding of 5CB depends strongly on the Pd coverage, with ∼0.1 monolayer (ML) of Pd sufficient to cause the liquid crystal (LC) to adopt a perpendicular binding mode. Computed heats of dissociative adsorption of Cl₂ on PdAu alloy surfaces predict displacement of 5CB from these surfaces, a result that is also confirmed by experiments revealing that 1 ppm Cl₂ triggers orientational transitions of 5CB. By decreasing the coverage of Pd on Au from 1.8 ± 0.2 ML to 0.09 ± 0.02 ML, the dynamic response of 5CB to 1 ppm Cl₂ is accelerated 3X. Overall, these results demonstrate the promise of hybrid designs of responsive materials based on atomically precise interfaces formed between hard bimetallic surfaces and soft matter.

Design of Chemoresponsive Soft Matter Using Hydrogen-Bonded Liquid Crystals

Soft matter that undergoes programmed macroscopic responses to molecular analytes has potential utility in a range of health and safety-related contexts. In this study, we report the design of a nematic liquid crystal (LC) composition that forms through dimerization of carboxylic acids and responds to the presence of vapors of organoamines by undergoing a visually distinct phase transition to an isotropic phase. Specifically, we screened mixtures of two carboxylic acids, 4-butylbenzoic acid and trans-4-pentylcyclohexanecarboxylic acid, and found select compositions that exhibited a nematic phase from 30.6 to 111.7 °C during heating and 110.6 to 3.1 °C during cooling. The metastable nematic phase formed at ambient temperatures was found to be long-lived (>5 days), thus enabling the use of the LC as a chemoresponsive optical material. By comparing experimental infrared (IR) spectra of the LC phase with vibrational frequencies calculated using density functional theory (DFT), we show that it is possible to distinguish between the presence of monomers, homodimers and heterodimers in the mixture, leading us to conclude that a one-to-one heterodimer is the dominant species within this LC composition. Further support for this conclusion is obtained by using differential scanning calorimetry. Exposure of the LC to 12 ppm triethylamine (TEA) triggers a phase transition to an isotropic phase, which we show by IR spectroscopy to be driven by an acid-base reaction, leading to the formation of ammonium carboxylate salts. We characterized the dynamics of the phase transition and found that it proceeds via a characteristic spatiotemporal pathway involving the nucleation, growth, and coalescence of isotropic domains, thus amplifying the atomic-scale acid-base reaction into an information-rich optical output. In contrast to TEA, we determined via both experiment and computation that neither hydrogen bonding donor or acceptor molecules, such as water, dimethyl methylphosphonate, ethylene oxide or formaldehyde, disrupt the heterodimers formed in the LC, hinting that the phase transition (including spatial-temporal characteristics of the pathway) induced in this class of hydrogen bonded LC may offer the basis of a facile and chemically selective way of reporting the presence of volatile amines. This proposal is supported by exploratory experiments in which we show that it is possible to trigger a phase transition in the LC by exposure to volatile amines emitted from rotting fish. Overall, these results provide new principles for the design of chemoresponsive soft matter based on hydrogen bonded LCs that may find use as the basis of low-cost visual indicators of chemical environments.

Liquid crystal-based sensing platform for detection of Pb2+ assisted by DNAzyme and rolling circle amplification

Lead ions (Pb²⁺) are one of the most widespread heavy metal contaminants that pose detrimental impact on environment and human health. We demonstrate a highly sensitive and specific liquid crystal (LC)-based sensing platform for detecting Pb²⁺ assisted by DNAzyme and rolling circle amplification (RCA). Magnetic beads (MBs) are functionalized with DNA duplexes of the catalytic strands (DNAzymes) and the substrate strands. In the presence of Pb²⁺, the substrate strands are disassembled due to activation of the DNAzyme, which allows initiation of DNA RCA on MBs. The amplified DNA strands can disrupt arrangement of octadecy trimethyl ammonium bromide monolayers (OTAB), thereby inducing planar orientation of LC molecules at the interface of aqueous and LCs. Thus, LCs exhibit bright appearance. In contrast, RCA cannot be triggered in the absence of Pb²⁺. Therefore, LC molecules adopt perpendicular orientation at the interface, which induces the dark morphology of LCs. The limit of detection reaches as low as 16.7 pM. It is an improvement of more than two orders of magnitude compared to that of previously reported LC-based sensing approaches. This approach also shows excellent performance in monitoring Pb²⁺ in tap water and lake water.

Binding of Organophosphorus Nerve Agents and Their Simulants to Metal Salts

Nerve agents (NAs) pose a great threat to society because they are easy to produce and are deadly in nature, which makes developing methods to detect, adsorb, and destroy them crucial. To enable the development of these methods, we report the use of first principles electronic structure calculations to understand the binding properties of NAs and NA simulants on metal salt surfaces. We report calculated Gibbs free binding energies (G_BE) for four NAs (tabun (GA), sarin (GB), soman (GD), and venomous X (VX)) and five NA simulants (dimethyl methylphosphonate (DMMP), dimethyl chlorophosphate (DMCP), trimethyl phosphate (TMP), methyl dichlorophosphate (MDCP), and di-isopropyl methylphosphonate (DIMP)) on metal perchlorate and metal nitrate salts using density functional theory. Our results indicate a general trend in the binding strength of NAs and NA simulants to metal salt surfaces: MDCP < DMCP < GA < GD ≈ GB < TMP < VX ≈ DMMP < DIMP. Based on their binding properties on salt surfaces, we identify the most effective simulant for each of the studied NAs as follows: DMCP for GA, TMP for GB and GD, and DMMP for VX. To illustrate the utility of the binding energies calculated in our study, we address the design of NA sensors based on the competitive binding of NAs and liquid crystalline compounds on metal salts. We compare our results with previous experimental findings and provide a list of promising combinations of liquid crystal and metal salt systems to selectively and sensitively detect NAs. Our study highlights the great value of computational chemistry for designing selective and sensitive NA sensors while minimizing the number of very dangerous experiments involving NAs.